linux/arch/mips/ath79/dev-usb.c
Gabor Juhos 5fb234560e MIPS: ath79: Use correct IRQ number for the OHCI controller on AR7240
The currently assigned IRQ number to the OHCI controller is incorrect for
the AR7240 SoC, and that leads to the following error message from the
OHCI driver:

ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ath79-ohci ath79-ohci: Atheros built-in OHCI controller
ath79-ohci ath79-ohci: new USB bus registered, assigned bus number 1
ath79-ohci ath79-ohci: irq 14, io mem 0x1b000000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
usb 1-1: new full-speed USB device number 2 using ath79-ohci
ath79-ohci ath79-ohci: Unlink after no-IRQ?  Controller is probably using the wrong IRQ.

Fix this by using the correct IRQ number.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4168/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-08-17 10:57:27 +02:00

219 lines
5.7 KiB
C

/*
* Atheros AR7XXX/AR9XXX USB Host Controller device
*
* Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
* Parts of this file are based on Atheros' 2.6.15 BSP
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/usb/ehci_pdriver.h>
#include <linux/usb/ohci_pdriver.h>
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
#include "dev-usb.h"
static struct resource ath79_ohci_resources[] = {
[0] = {
/* .start and .end fields are filled dynamically */
.flags = IORESOURCE_MEM,
},
[1] = {
.start = ATH79_MISC_IRQ_OHCI,
.end = ATH79_MISC_IRQ_OHCI,
.flags = IORESOURCE_IRQ,
},
};
static u64 ath79_ohci_dmamask = DMA_BIT_MASK(32);
static struct usb_ohci_pdata ath79_ohci_pdata = {
};
static struct platform_device ath79_ohci_device = {
.name = "ohci-platform",
.id = -1,
.resource = ath79_ohci_resources,
.num_resources = ARRAY_SIZE(ath79_ohci_resources),
.dev = {
.dma_mask = &ath79_ohci_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &ath79_ohci_pdata,
},
};
static struct resource ath79_ehci_resources[] = {
[0] = {
/* .start and .end fields are filled dynamically */
.flags = IORESOURCE_MEM,
},
[1] = {
.start = ATH79_CPU_IRQ_USB,
.end = ATH79_CPU_IRQ_USB,
.flags = IORESOURCE_IRQ,
},
};
static u64 ath79_ehci_dmamask = DMA_BIT_MASK(32);
static struct usb_ehci_pdata ath79_ehci_pdata_v1 = {
.has_synopsys_hc_bug = 1,
.port_power_off = 1,
};
static struct usb_ehci_pdata ath79_ehci_pdata_v2 = {
.caps_offset = 0x100,
.has_tt = 1,
.port_power_off = 1,
};
static struct platform_device ath79_ehci_device = {
.name = "ehci-platform",
.id = -1,
.resource = ath79_ehci_resources,
.num_resources = ARRAY_SIZE(ath79_ehci_resources),
.dev = {
.dma_mask = &ath79_ehci_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
#define AR71XX_USB_RESET_MASK (AR71XX_RESET_USB_HOST | \
AR71XX_RESET_USB_PHY | \
AR71XX_RESET_USB_OHCI_DLL)
static void __init ath79_usb_setup(void)
{
void __iomem *usb_ctrl_base;
ath79_device_reset_set(AR71XX_USB_RESET_MASK);
mdelay(1000);
ath79_device_reset_clear(AR71XX_USB_RESET_MASK);
usb_ctrl_base = ioremap(AR71XX_USB_CTRL_BASE, AR71XX_USB_CTRL_SIZE);
/* Turning on the Buff and Desc swap bits */
__raw_writel(0xf0000, usb_ctrl_base + AR71XX_USB_CTRL_REG_CONFIG);
/* WAR for HW bug. Here it adjusts the duration between two SOFS */
__raw_writel(0x20c00, usb_ctrl_base + AR71XX_USB_CTRL_REG_FLADJ);
iounmap(usb_ctrl_base);
mdelay(900);
ath79_ohci_resources[0].start = AR71XX_OHCI_BASE;
ath79_ohci_resources[0].end = AR71XX_OHCI_BASE + AR71XX_OHCI_SIZE - 1;
platform_device_register(&ath79_ohci_device);
ath79_ehci_resources[0].start = AR71XX_EHCI_BASE;
ath79_ehci_resources[0].end = AR71XX_EHCI_BASE + AR71XX_EHCI_SIZE - 1;
ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v1;
platform_device_register(&ath79_ehci_device);
}
static void __init ar7240_usb_setup(void)
{
void __iomem *usb_ctrl_base;
ath79_device_reset_clear(AR7240_RESET_OHCI_DLL);
ath79_device_reset_set(AR7240_RESET_USB_HOST);
mdelay(1000);
ath79_device_reset_set(AR7240_RESET_OHCI_DLL);
ath79_device_reset_clear(AR7240_RESET_USB_HOST);
usb_ctrl_base = ioremap(AR7240_USB_CTRL_BASE, AR7240_USB_CTRL_SIZE);
/* WAR for HW bug. Here it adjusts the duration between two SOFS */
__raw_writel(0x3, usb_ctrl_base + AR71XX_USB_CTRL_REG_FLADJ);
iounmap(usb_ctrl_base);
ath79_ohci_resources[0].start = AR7240_OHCI_BASE;
ath79_ohci_resources[0].end = AR7240_OHCI_BASE + AR7240_OHCI_SIZE - 1;
ath79_ohci_resources[1].start = ATH79_CPU_IRQ_USB;
ath79_ohci_resources[1].end = ATH79_CPU_IRQ_USB;
platform_device_register(&ath79_ohci_device);
}
static void __init ar724x_usb_setup(void)
{
ath79_device_reset_set(AR724X_RESET_USBSUS_OVERRIDE);
mdelay(10);
ath79_device_reset_clear(AR724X_RESET_USB_HOST);
mdelay(10);
ath79_device_reset_clear(AR724X_RESET_USB_PHY);
mdelay(10);
ath79_ehci_resources[0].start = AR724X_EHCI_BASE;
ath79_ehci_resources[0].end = AR724X_EHCI_BASE + AR724X_EHCI_SIZE - 1;
ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2;
platform_device_register(&ath79_ehci_device);
}
static void __init ar913x_usb_setup(void)
{
ath79_device_reset_set(AR913X_RESET_USBSUS_OVERRIDE);
mdelay(10);
ath79_device_reset_clear(AR913X_RESET_USB_HOST);
mdelay(10);
ath79_device_reset_clear(AR913X_RESET_USB_PHY);
mdelay(10);
ath79_ehci_resources[0].start = AR913X_EHCI_BASE;
ath79_ehci_resources[0].end = AR913X_EHCI_BASE + AR913X_EHCI_SIZE - 1;
ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2;
platform_device_register(&ath79_ehci_device);
}
static void __init ar933x_usb_setup(void)
{
ath79_device_reset_set(AR933X_RESET_USBSUS_OVERRIDE);
mdelay(10);
ath79_device_reset_clear(AR933X_RESET_USB_HOST);
mdelay(10);
ath79_device_reset_clear(AR933X_RESET_USB_PHY);
mdelay(10);
ath79_ehci_resources[0].start = AR933X_EHCI_BASE;
ath79_ehci_resources[0].end = AR933X_EHCI_BASE + AR933X_EHCI_SIZE - 1;
ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2;
platform_device_register(&ath79_ehci_device);
}
void __init ath79_register_usb(void)
{
if (soc_is_ar71xx())
ath79_usb_setup();
else if (soc_is_ar7240())
ar7240_usb_setup();
else if (soc_is_ar7241() || soc_is_ar7242())
ar724x_usb_setup();
else if (soc_is_ar913x())
ar913x_usb_setup();
else if (soc_is_ar933x())
ar933x_usb_setup();
else
BUG();
}