linux/drivers/mtd/onenand/omap2.c
Tony Lindgren 45c3eb7d3a ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h
Based on earlier discussions[1] we attempted to find a suitable
location for the omap DMA header in commit 2b6c4e73 (ARM: OMAP:
DMA: Move plat/dma.h to plat-omap/dma-omap.h) until the conversion
to dmaengine is complete.

Unfortunately that was before I was able to try to test compile
of the ARM multiplatform builds for omap2+, and the end result
was not very good.

So I'm creating yet another all over the place patch to cut the
last dependency for building omap2+ for ARM multiplatform. After
this, we have finally removed the driver dependencies to the
arch/arm code, except for few drivers that are being worked on.

The other option was to make the <plat-omap/dma-omap.h> path
to work, but we'd have to add some new header directory to for
multiplatform builds.

Or we would have to manually include arch/arm/plat-omap/include
again from arch/arm/Makefile for omap2+.

Neither of these alternatives sound appealing as they will
likely lead addition of various other headers exposed to the
drivers, which we want to avoid for the multiplatform kernels.

Since we already have a minimal include/linux/omap-dma.h,
let's just use that instead and add a note to it to not
use the custom omap DMA functions any longer where possible.

Note that converting omap DMA to dmaengine depends on
dmaengine supporting automatically incrementing the FIFO
address at the device end, and converting all the remaining
legacy drivers. So it's going to be few more merge windows.

[1] https://patchwork.kernel.org/patch/1519591/#

cc: Russell King <linux@arm.linux.org.uk>
cc: Kevin Hilman <khilman@ti.com>
cc: "Benoît Cousson" <b-cousson@ti.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: "David S. Miller" <davem@davemloft.net>
cc: Vinod Koul <vinod.koul@intel.com>
cc: Dan Williams <djbw@fb.com>
cc: Mauro Carvalho Chehab <mchehab@infradead.org>
cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
cc: David Woodhouse <dwmw2@infradead.org>
cc: Kyungmin Park <kyungmin.park@samsung.com>
cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
cc: Hans Verkuil <hans.verkuil@cisco.com>
cc: Vaibhav Hiremath <hvaibhav@ti.com>
cc: Lokesh Vutla <lokeshvutla@ti.com>
cc: Rusty Russell <rusty@rustcorp.com.au>
cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
cc: Afzal Mohammed <afzal@ti.com>
cc: linux-crypto@vger.kernel.org
cc: linux-media@vger.kernel.org
cc: linux-mtd@lists.infradead.org
cc: linux-usb@vger.kernel.org
cc: linux-fbdev@vger.kernel.org
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-11-30 08:41:50 -08:00

851 lines
22 KiB
C

/*
* linux/drivers/mtd/onenand/omap2.c
*
* OneNAND driver for OMAP2 / OMAP3
*
* Copyright © 2005-2006 Nokia Corporation
*
* Author: Jarkko Lavinen <jarkko.lavinen@nokia.com> and Juha Yrjölä
* IRQ and DMA support written by Timo Teras
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; see the file COPYING. If not, write to the Free Software
* Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
*/
#include <linux/device.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/onenand.h>
#include <linux/mtd/partitions.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/regulator/consumer.h>
#include <asm/mach/flash.h>
#include <linux/platform_data/mtd-onenand-omap2.h>
#include <asm/gpio.h>
#include <linux/omap-dma.h>
#define DRIVER_NAME "omap2-onenand"
#define ONENAND_BUFRAM_SIZE (1024 * 5)
struct omap2_onenand {
struct platform_device *pdev;
int gpmc_cs;
unsigned long phys_base;
unsigned int mem_size;
int gpio_irq;
struct mtd_info mtd;
struct onenand_chip onenand;
struct completion irq_done;
struct completion dma_done;
int dma_channel;
int freq;
int (*setup)(void __iomem *base, int *freq_ptr);
struct regulator *regulator;
u8 flags;
};
static void omap2_onenand_dma_cb(int lch, u16 ch_status, void *data)
{
struct omap2_onenand *c = data;
complete(&c->dma_done);
}
static irqreturn_t omap2_onenand_interrupt(int irq, void *dev_id)
{
struct omap2_onenand *c = dev_id;
complete(&c->irq_done);
return IRQ_HANDLED;
}
static inline unsigned short read_reg(struct omap2_onenand *c, int reg)
{
return readw(c->onenand.base + reg);
}
static inline void write_reg(struct omap2_onenand *c, unsigned short value,
int reg)
{
writew(value, c->onenand.base + reg);
}
static void wait_err(char *msg, int state, unsigned int ctrl, unsigned int intr)
{
printk(KERN_ERR "onenand_wait: %s! state %d ctrl 0x%04x intr 0x%04x\n",
msg, state, ctrl, intr);
}
static void wait_warn(char *msg, int state, unsigned int ctrl,
unsigned int intr)
{
printk(KERN_WARNING "onenand_wait: %s! state %d ctrl 0x%04x "
"intr 0x%04x\n", msg, state, ctrl, intr);
}
static int omap2_onenand_wait(struct mtd_info *mtd, int state)
{
struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd);
struct onenand_chip *this = mtd->priv;
unsigned int intr = 0;
unsigned int ctrl, ctrl_mask;
unsigned long timeout;
u32 syscfg;
if (state == FL_RESETING || state == FL_PREPARING_ERASE ||
state == FL_VERIFYING_ERASE) {
int i = 21;
unsigned int intr_flags = ONENAND_INT_MASTER;
switch (state) {
case FL_RESETING:
intr_flags |= ONENAND_INT_RESET;
break;
case FL_PREPARING_ERASE:
intr_flags |= ONENAND_INT_ERASE;
break;
case FL_VERIFYING_ERASE:
i = 101;
break;
}
while (--i) {
udelay(1);
intr = read_reg(c, ONENAND_REG_INTERRUPT);
if (intr & ONENAND_INT_MASTER)
break;
}
ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS);
if (ctrl & ONENAND_CTRL_ERROR) {
wait_err("controller error", state, ctrl, intr);
return -EIO;
}
if ((intr & intr_flags) == intr_flags)
return 0;
/* Continue in wait for interrupt branch */
}
if (state != FL_READING) {
int result;
/* Turn interrupts on */
syscfg = read_reg(c, ONENAND_REG_SYS_CFG1);
if (!(syscfg & ONENAND_SYS_CFG1_IOBE)) {
syscfg |= ONENAND_SYS_CFG1_IOBE;
write_reg(c, syscfg, ONENAND_REG_SYS_CFG1);
if (c->flags & ONENAND_IN_OMAP34XX)
/* Add a delay to let GPIO settle */
syscfg = read_reg(c, ONENAND_REG_SYS_CFG1);
}
INIT_COMPLETION(c->irq_done);
if (c->gpio_irq) {
result = gpio_get_value(c->gpio_irq);
if (result == -1) {
ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS);
intr = read_reg(c, ONENAND_REG_INTERRUPT);
wait_err("gpio error", state, ctrl, intr);
return -EIO;
}
} else
result = 0;
if (result == 0) {
int retry_cnt = 0;
retry:
result = wait_for_completion_timeout(&c->irq_done,
msecs_to_jiffies(20));
if (result == 0) {
/* Timeout after 20ms */
ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS);
if (ctrl & ONENAND_CTRL_ONGO &&
!this->ongoing) {
/*
* The operation seems to be still going
* so give it some more time.
*/
retry_cnt += 1;
if (retry_cnt < 3)
goto retry;
intr = read_reg(c,
ONENAND_REG_INTERRUPT);
wait_err("timeout", state, ctrl, intr);
return -EIO;
}
intr = read_reg(c, ONENAND_REG_INTERRUPT);
if ((intr & ONENAND_INT_MASTER) == 0)
wait_warn("timeout", state, ctrl, intr);
}
}
} else {
int retry_cnt = 0;
/* Turn interrupts off */
syscfg = read_reg(c, ONENAND_REG_SYS_CFG1);
syscfg &= ~ONENAND_SYS_CFG1_IOBE;
write_reg(c, syscfg, ONENAND_REG_SYS_CFG1);
timeout = jiffies + msecs_to_jiffies(20);
while (1) {
if (time_before(jiffies, timeout)) {
intr = read_reg(c, ONENAND_REG_INTERRUPT);
if (intr & ONENAND_INT_MASTER)
break;
} else {
/* Timeout after 20ms */
ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS);
if (ctrl & ONENAND_CTRL_ONGO) {
/*
* The operation seems to be still going
* so give it some more time.
*/
retry_cnt += 1;
if (retry_cnt < 3) {
timeout = jiffies +
msecs_to_jiffies(20);
continue;
}
}
break;
}
}
}
intr = read_reg(c, ONENAND_REG_INTERRUPT);
ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS);
if (intr & ONENAND_INT_READ) {
int ecc = read_reg(c, ONENAND_REG_ECC_STATUS);
if (ecc) {
unsigned int addr1, addr8;
addr1 = read_reg(c, ONENAND_REG_START_ADDRESS1);
addr8 = read_reg(c, ONENAND_REG_START_ADDRESS8);
if (ecc & ONENAND_ECC_2BIT_ALL) {
printk(KERN_ERR "onenand_wait: ECC error = "
"0x%04x, addr1 %#x, addr8 %#x\n",
ecc, addr1, addr8);
mtd->ecc_stats.failed++;
return -EBADMSG;
} else if (ecc & ONENAND_ECC_1BIT_ALL) {
printk(KERN_NOTICE "onenand_wait: correctable "
"ECC error = 0x%04x, addr1 %#x, "
"addr8 %#x\n", ecc, addr1, addr8);
mtd->ecc_stats.corrected++;
}
}
} else if (state == FL_READING) {
wait_err("timeout", state, ctrl, intr);
return -EIO;
}
if (ctrl & ONENAND_CTRL_ERROR) {
wait_err("controller error", state, ctrl, intr);
if (ctrl & ONENAND_CTRL_LOCK)
printk(KERN_ERR "onenand_wait: "
"Device is write protected!!!\n");
return -EIO;
}
ctrl_mask = 0xFE9F;
if (this->ongoing)
ctrl_mask &= ~0x8000;
if (ctrl & ctrl_mask)
wait_warn("unexpected controller status", state, ctrl, intr);
return 0;
}
static inline int omap2_onenand_bufferram_offset(struct mtd_info *mtd, int area)
{
struct onenand_chip *this = mtd->priv;
if (ONENAND_CURRENT_BUFFERRAM(this)) {
if (area == ONENAND_DATARAM)
return this->writesize;
if (area == ONENAND_SPARERAM)
return mtd->oobsize;
}
return 0;
}
#if defined(CONFIG_ARCH_OMAP3) || defined(MULTI_OMAP2)
static int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area,
unsigned char *buffer, int offset,
size_t count)
{
struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd);
struct onenand_chip *this = mtd->priv;
dma_addr_t dma_src, dma_dst;
int bram_offset;
unsigned long timeout;
void *buf = (void *)buffer;
size_t xtra;
volatile unsigned *done;
bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset;
if (bram_offset & 3 || (size_t)buf & 3 || count < 384)
goto out_copy;
/* panic_write() may be in an interrupt context */
if (in_interrupt() || oops_in_progress)
goto out_copy;
if (buf >= high_memory) {
struct page *p1;
if (((size_t)buf & PAGE_MASK) !=
((size_t)(buf + count - 1) & PAGE_MASK))
goto out_copy;
p1 = vmalloc_to_page(buf);
if (!p1)
goto out_copy;
buf = page_address(p1) + ((size_t)buf & ~PAGE_MASK);
}
xtra = count & 3;
if (xtra) {
count -= xtra;
memcpy(buf + count, this->base + bram_offset + count, xtra);
}
dma_src = c->phys_base + bram_offset;
dma_dst = dma_map_single(&c->pdev->dev, buf, count, DMA_FROM_DEVICE);
if (dma_mapping_error(&c->pdev->dev, dma_dst)) {
dev_err(&c->pdev->dev,
"Couldn't DMA map a %d byte buffer\n",
count);
goto out_copy;
}
omap_set_dma_transfer_params(c->dma_channel, OMAP_DMA_DATA_TYPE_S32,
count >> 2, 1, 0, 0, 0);
omap_set_dma_src_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
dma_src, 0, 0);
omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
dma_dst, 0, 0);
INIT_COMPLETION(c->dma_done);
omap_start_dma(c->dma_channel);
timeout = jiffies + msecs_to_jiffies(20);
done = &c->dma_done.done;
while (time_before(jiffies, timeout))
if (*done)
break;
dma_unmap_single(&c->pdev->dev, dma_dst, count, DMA_FROM_DEVICE);
if (!*done) {
dev_err(&c->pdev->dev, "timeout waiting for DMA\n");
goto out_copy;
}
return 0;
out_copy:
memcpy(buf, this->base + bram_offset, count);
return 0;
}
static int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area,
const unsigned char *buffer,
int offset, size_t count)
{
struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd);
struct onenand_chip *this = mtd->priv;
dma_addr_t dma_src, dma_dst;
int bram_offset;
unsigned long timeout;
void *buf = (void *)buffer;
volatile unsigned *done;
bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset;
if (bram_offset & 3 || (size_t)buf & 3 || count < 384)
goto out_copy;
/* panic_write() may be in an interrupt context */
if (in_interrupt() || oops_in_progress)
goto out_copy;
if (buf >= high_memory) {
struct page *p1;
if (((size_t)buf & PAGE_MASK) !=
((size_t)(buf + count - 1) & PAGE_MASK))
goto out_copy;
p1 = vmalloc_to_page(buf);
if (!p1)
goto out_copy;
buf = page_address(p1) + ((size_t)buf & ~PAGE_MASK);
}
dma_src = dma_map_single(&c->pdev->dev, buf, count, DMA_TO_DEVICE);
dma_dst = c->phys_base + bram_offset;
if (dma_mapping_error(&c->pdev->dev, dma_src)) {
dev_err(&c->pdev->dev,
"Couldn't DMA map a %d byte buffer\n",
count);
return -1;
}
omap_set_dma_transfer_params(c->dma_channel, OMAP_DMA_DATA_TYPE_S32,
count >> 2, 1, 0, 0, 0);
omap_set_dma_src_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
dma_src, 0, 0);
omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
dma_dst, 0, 0);
INIT_COMPLETION(c->dma_done);
omap_start_dma(c->dma_channel);
timeout = jiffies + msecs_to_jiffies(20);
done = &c->dma_done.done;
while (time_before(jiffies, timeout))
if (*done)
break;
dma_unmap_single(&c->pdev->dev, dma_src, count, DMA_TO_DEVICE);
if (!*done) {
dev_err(&c->pdev->dev, "timeout waiting for DMA\n");
goto out_copy;
}
return 0;
out_copy:
memcpy(this->base + bram_offset, buf, count);
return 0;
}
#else
static int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area,
unsigned char *buffer, int offset,
size_t count)
{
return -ENOSYS;
}
static int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area,
const unsigned char *buffer,
int offset, size_t count)
{
return -ENOSYS;
}
#endif
#if defined(CONFIG_ARCH_OMAP2) || defined(MULTI_OMAP2)
static int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area,
unsigned char *buffer, int offset,
size_t count)
{
struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd);
struct onenand_chip *this = mtd->priv;
dma_addr_t dma_src, dma_dst;
int bram_offset;
bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset;
/* DMA is not used. Revisit PM requirements before enabling it. */
if (1 || (c->dma_channel < 0) ||
((void *) buffer >= (void *) high_memory) || (bram_offset & 3) ||
(((unsigned int) buffer) & 3) || (count < 1024) || (count & 3)) {
memcpy(buffer, (__force void *)(this->base + bram_offset),
count);
return 0;
}
dma_src = c->phys_base + bram_offset;
dma_dst = dma_map_single(&c->pdev->dev, buffer, count,
DMA_FROM_DEVICE);
if (dma_mapping_error(&c->pdev->dev, dma_dst)) {
dev_err(&c->pdev->dev,
"Couldn't DMA map a %d byte buffer\n",
count);
return -1;
}
omap_set_dma_transfer_params(c->dma_channel, OMAP_DMA_DATA_TYPE_S32,
count / 4, 1, 0, 0, 0);
omap_set_dma_src_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
dma_src, 0, 0);
omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
dma_dst, 0, 0);
INIT_COMPLETION(c->dma_done);
omap_start_dma(c->dma_channel);
wait_for_completion(&c->dma_done);
dma_unmap_single(&c->pdev->dev, dma_dst, count, DMA_FROM_DEVICE);
return 0;
}
static int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area,
const unsigned char *buffer,
int offset, size_t count)
{
struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd);
struct onenand_chip *this = mtd->priv;
dma_addr_t dma_src, dma_dst;
int bram_offset;
bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset;
/* DMA is not used. Revisit PM requirements before enabling it. */
if (1 || (c->dma_channel < 0) ||
((void *) buffer >= (void *) high_memory) || (bram_offset & 3) ||
(((unsigned int) buffer) & 3) || (count < 1024) || (count & 3)) {
memcpy((__force void *)(this->base + bram_offset), buffer,
count);
return 0;
}
dma_src = dma_map_single(&c->pdev->dev, (void *) buffer, count,
DMA_TO_DEVICE);
dma_dst = c->phys_base + bram_offset;
if (dma_mapping_error(&c->pdev->dev, dma_src)) {
dev_err(&c->pdev->dev,
"Couldn't DMA map a %d byte buffer\n",
count);
return -1;
}
omap_set_dma_transfer_params(c->dma_channel, OMAP_DMA_DATA_TYPE_S16,
count / 2, 1, 0, 0, 0);
omap_set_dma_src_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
dma_src, 0, 0);
omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
dma_dst, 0, 0);
INIT_COMPLETION(c->dma_done);
omap_start_dma(c->dma_channel);
wait_for_completion(&c->dma_done);
dma_unmap_single(&c->pdev->dev, dma_src, count, DMA_TO_DEVICE);
return 0;
}
#else
static int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area,
unsigned char *buffer, int offset,
size_t count)
{
return -ENOSYS;
}
static int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area,
const unsigned char *buffer,
int offset, size_t count)
{
return -ENOSYS;
}
#endif
static struct platform_driver omap2_onenand_driver;
static int __adjust_timing(struct device *dev, void *data)
{
int ret = 0;
struct omap2_onenand *c;
c = dev_get_drvdata(dev);
BUG_ON(c->setup == NULL);
/* DMA is not in use so this is all that is needed */
/* Revisit for OMAP3! */
ret = c->setup(c->onenand.base, &c->freq);
return ret;
}
int omap2_onenand_rephase(void)
{
return driver_for_each_device(&omap2_onenand_driver.driver, NULL,
NULL, __adjust_timing);
}
static void omap2_onenand_shutdown(struct platform_device *pdev)
{
struct omap2_onenand *c = dev_get_drvdata(&pdev->dev);
/* With certain content in the buffer RAM, the OMAP boot ROM code
* can recognize the flash chip incorrectly. Zero it out before
* soft reset.
*/
memset((__force void *)c->onenand.base, 0, ONENAND_BUFRAM_SIZE);
}
static int omap2_onenand_enable(struct mtd_info *mtd)
{
int ret;
struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd);
ret = regulator_enable(c->regulator);
if (ret != 0)
dev_err(&c->pdev->dev, "can't enable regulator\n");
return ret;
}
static int omap2_onenand_disable(struct mtd_info *mtd)
{
int ret;
struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd);
ret = regulator_disable(c->regulator);
if (ret != 0)
dev_err(&c->pdev->dev, "can't disable regulator\n");
return ret;
}
static int __devinit omap2_onenand_probe(struct platform_device *pdev)
{
struct omap_onenand_platform_data *pdata;
struct omap2_onenand *c;
struct onenand_chip *this;
int r;
struct resource *res;
pdata = pdev->dev.platform_data;
if (pdata == NULL) {
dev_err(&pdev->dev, "platform data missing\n");
return -ENODEV;
}
c = kzalloc(sizeof(struct omap2_onenand), GFP_KERNEL);
if (!c)
return -ENOMEM;
init_completion(&c->irq_done);
init_completion(&c->dma_done);
c->flags = pdata->flags;
c->gpmc_cs = pdata->cs;
c->gpio_irq = pdata->gpio_irq;
c->dma_channel = pdata->dma_channel;
if (c->dma_channel < 0) {
/* if -1, don't use DMA */
c->gpio_irq = 0;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res == NULL) {
r = -EINVAL;
dev_err(&pdev->dev, "error getting memory resource\n");
goto err_kfree;
}
c->phys_base = res->start;
c->mem_size = resource_size(res);
if (request_mem_region(c->phys_base, c->mem_size,
pdev->dev.driver->name) == NULL) {
dev_err(&pdev->dev, "Cannot reserve memory region at 0x%08lx, size: 0x%x\n",
c->phys_base, c->mem_size);
r = -EBUSY;
goto err_kfree;
}
c->onenand.base = ioremap(c->phys_base, c->mem_size);
if (c->onenand.base == NULL) {
r = -ENOMEM;
goto err_release_mem_region;
}
if (pdata->onenand_setup != NULL) {
r = pdata->onenand_setup(c->onenand.base, &c->freq);
if (r < 0) {
dev_err(&pdev->dev, "Onenand platform setup failed: "
"%d\n", r);
goto err_iounmap;
}
c->setup = pdata->onenand_setup;
}
if (c->gpio_irq) {
if ((r = gpio_request(c->gpio_irq, "OneNAND irq")) < 0) {
dev_err(&pdev->dev, "Failed to request GPIO%d for "
"OneNAND\n", c->gpio_irq);
goto err_iounmap;
}
gpio_direction_input(c->gpio_irq);
if ((r = request_irq(gpio_to_irq(c->gpio_irq),
omap2_onenand_interrupt, IRQF_TRIGGER_RISING,
pdev->dev.driver->name, c)) < 0)
goto err_release_gpio;
}
if (c->dma_channel >= 0) {
r = omap_request_dma(0, pdev->dev.driver->name,
omap2_onenand_dma_cb, (void *) c,
&c->dma_channel);
if (r == 0) {
omap_set_dma_write_mode(c->dma_channel,
OMAP_DMA_WRITE_NON_POSTED);
omap_set_dma_src_data_pack(c->dma_channel, 1);
omap_set_dma_src_burst_mode(c->dma_channel,
OMAP_DMA_DATA_BURST_8);
omap_set_dma_dest_data_pack(c->dma_channel, 1);
omap_set_dma_dest_burst_mode(c->dma_channel,
OMAP_DMA_DATA_BURST_8);
} else {
dev_info(&pdev->dev,
"failed to allocate DMA for OneNAND, "
"using PIO instead\n");
c->dma_channel = -1;
}
}
dev_info(&pdev->dev, "initializing on CS%d, phys base 0x%08lx, virtual "
"base %p, freq %d MHz\n", c->gpmc_cs, c->phys_base,
c->onenand.base, c->freq);
c->pdev = pdev;
c->mtd.name = dev_name(&pdev->dev);
c->mtd.priv = &c->onenand;
c->mtd.owner = THIS_MODULE;
c->mtd.dev.parent = &pdev->dev;
this = &c->onenand;
if (c->dma_channel >= 0) {
this->wait = omap2_onenand_wait;
if (c->flags & ONENAND_IN_OMAP34XX) {
this->read_bufferram = omap3_onenand_read_bufferram;
this->write_bufferram = omap3_onenand_write_bufferram;
} else {
this->read_bufferram = omap2_onenand_read_bufferram;
this->write_bufferram = omap2_onenand_write_bufferram;
}
}
if (pdata->regulator_can_sleep) {
c->regulator = regulator_get(&pdev->dev, "vonenand");
if (IS_ERR(c->regulator)) {
dev_err(&pdev->dev, "Failed to get regulator\n");
r = PTR_ERR(c->regulator);
goto err_release_dma;
}
c->onenand.enable = omap2_onenand_enable;
c->onenand.disable = omap2_onenand_disable;
}
if (pdata->skip_initial_unlocking)
this->options |= ONENAND_SKIP_INITIAL_UNLOCKING;
if ((r = onenand_scan(&c->mtd, 1)) < 0)
goto err_release_regulator;
r = mtd_device_parse_register(&c->mtd, NULL, NULL,
pdata ? pdata->parts : NULL,
pdata ? pdata->nr_parts : 0);
if (r)
goto err_release_onenand;
platform_set_drvdata(pdev, c);
return 0;
err_release_onenand:
onenand_release(&c->mtd);
err_release_regulator:
regulator_put(c->regulator);
err_release_dma:
if (c->dma_channel != -1)
omap_free_dma(c->dma_channel);
if (c->gpio_irq)
free_irq(gpio_to_irq(c->gpio_irq), c);
err_release_gpio:
if (c->gpio_irq)
gpio_free(c->gpio_irq);
err_iounmap:
iounmap(c->onenand.base);
err_release_mem_region:
release_mem_region(c->phys_base, c->mem_size);
err_kfree:
kfree(c);
return r;
}
static int __devexit omap2_onenand_remove(struct platform_device *pdev)
{
struct omap2_onenand *c = dev_get_drvdata(&pdev->dev);
onenand_release(&c->mtd);
regulator_put(c->regulator);
if (c->dma_channel != -1)
omap_free_dma(c->dma_channel);
omap2_onenand_shutdown(pdev);
platform_set_drvdata(pdev, NULL);
if (c->gpio_irq) {
free_irq(gpio_to_irq(c->gpio_irq), c);
gpio_free(c->gpio_irq);
}
iounmap(c->onenand.base);
release_mem_region(c->phys_base, c->mem_size);
kfree(c);
return 0;
}
static struct platform_driver omap2_onenand_driver = {
.probe = omap2_onenand_probe,
.remove = __devexit_p(omap2_onenand_remove),
.shutdown = omap2_onenand_shutdown,
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
},
};
static int __init omap2_onenand_init(void)
{
printk(KERN_INFO "OneNAND driver initializing\n");
return platform_driver_register(&omap2_onenand_driver);
}
static void __exit omap2_onenand_exit(void)
{
platform_driver_unregister(&omap2_onenand_driver);
}
module_init(omap2_onenand_init);
module_exit(omap2_onenand_exit);
MODULE_ALIAS("platform:" DRIVER_NAME);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Jarkko Lavinen <jarkko.lavinen@nokia.com>");
MODULE_DESCRIPTION("Glue layer for OneNAND flash on OMAP2 / OMAP3");