linux/drivers/gpio/gpio-xgene-sb.c
Linus Torvalds 6aa2f9441f This is the bulk of GPIO changes for the v4.15 kernel cycle:
CORE:
 - Fix the semantics of raw GPIO to actually be raw. No
   inversion semantics as before, but also no open draining,
   and allow the raw operations to affect lines used for
   interrupts as the caller supposedly knows what they are
   doing if they are getting the big hammer.
 
 - Rewrote the __inner_function() notation calls to names that
   make more sense. I just find this kind of code disturbing.
 
 - Drop the .irq_base() field from the gpiochip since now all
   IRQs are mapped dynamically. This is nice.
 
 - Support for .get_multiple() in the core driver API. This
   allows us to read several GPIO lines with a single
   register read. This has high value for some usecases: it
   can be used to create oscilloscopes and signal analyzers
   and other things that rely on reading several lines at
   exactly the same instant. Also a generally nice
   optimization. This uses the new assign_bit() macro from
   the bitops lib that was ACKed by Andrew Morton and
   is implemented for two drivers, one of them being the
   generic MMIO driver so everyone using that will be able
   to benefit from this.
 
 - Do not allow requests of Open Drain and Open Source
   setting of a GPIO line simultaneously. If the hardware
   actually supports enabling both at the same time the
   electrical result would be disastrous.
 
 - A new interrupt chip core helper. This will be helpful
   to deal with "banked" GPIOs, which means GPIO controllers
   with several logical blocks of GPIO inside them. This
   is several gpiochips per device in the device model, in
   contrast to the case when there is a 1-to-1 relationship
   between a device and a gpiochip.
 
 NEW DRIVERS:
 
 - Maxim MAX3191x industrial serializer, a very interesting
   piece of professional I/O hardware.
 
 - Uniphier GPIO driver. This is the GPIO block from the
   recent Socionext (ex Fujitsu and Panasonic) platform.
 
 - Tegra 186 driver. This is based on the new banked GPIO
   infrastructure.
 
 OTHER IMPROVEMENTS:
 
 - Some documentation improvements.
 
 - Wakeup support for the DesignWare DWAPB GPIO controller.
 
 - Reset line support on the DesignWare DWAPB GPIO controller.
 
 - Several non-critical bug fixes and improvements for the
   Broadcom BRCMSTB driver.
 
 - Misc non-critical bug fixes like exotic errorpaths, removal
   of dead code etc.
 
 - Explicit comments on fall-through switch() statements.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJaCvGiAAoJEEEQszewGV1z+oAQAJUpdPH/msdgHDuXSuBcbuFq
 NObQdkRiz1hez4vJOT+kbgES6ay57MArnbmM/xRdy+37lKrmkP+yfZe4UUruQhhW
 f2GVlwBbUp9tIzNliS8IYWO0tj+BTYyg1MQx0C0nE1zMZqVZk44EDa9SO6esRaFJ
 SLc2BpO3oJCQRaObe0+KTHIJV0dK3vQh4QXSzL+cM5u7P67Jq+wv4xdLVVScwbJB
 4jgwVER3Ah0E1jHclIG2PxI1rbYKwlOBumafOTUlq5fmfC3tULVPJEm9FXcdaBLJ
 KAmtxX4yi+SgUccYFsmK+fNNLVQiAjmkhJCl6kxVOrxYqamrG100YST4Iew3sakM
 /iQ3lpup5L6eJ/dndfgE207OqRFhvAzNRxORv1p/wJIRLmV1/QehCX8GYOcDumXY
 MySRcEeUeZPfBHcnjIDRP6y/XOg8zBKso7GL+feRgLZUJZlNQZqokdC95TY9S5nm
 QLK+sU367o41tomyv5TP3y1DDsym6+ZdpuOUh73znxuz2x/x+FfTfwM2J0r8Ussm
 GQTfAojeBI9aSOZ2mvgRI1XxSprXqO3FFFWBwrQ6RS9rBceLF1o2ySKC2gI0FG5d
 6GBkARcN5RyyNtYkH923pyrqz/FZJc6ZkrsUTGmERM5HGuWwczcditqwYRhbHwl8
 pIlmX4y0AYh6FFVoIcQE
 =8Mon
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.15 kernel cycle:

  Core:

   - Fix the semantics of raw GPIO to actually be raw. No inversion
     semantics as before, but also no open draining, and allow the raw
     operations to affect lines used for interrupts as the caller
     supposedly knows what they are doing if they are getting the big
     hammer.

   - Rewrote the __inner_function() notation calls to names that make
     more sense. I just find this kind of code disturbing.

   - Drop the .irq_base() field from the gpiochip since now all IRQs are
     mapped dynamically. This is nice.

   - Support for .get_multiple() in the core driver API. This allows us
     to read several GPIO lines with a single register read. This has
     high value for some usecases: it can be used to create
     oscilloscopes and signal analyzers and other things that rely on
     reading several lines at exactly the same instant. Also a generally
     nice optimization. This uses the new assign_bit() macro from the
     bitops lib that was ACKed by Andrew Morton and is implemented for
     two drivers, one of them being the generic MMIO driver so everyone
     using that will be able to benefit from this.

   - Do not allow requests of Open Drain and Open Source setting of a
     GPIO line simultaneously. If the hardware actually supports
     enabling both at the same time the electrical result would be
     disastrous.

   - A new interrupt chip core helper. This will be helpful to deal with
     "banked" GPIOs, which means GPIO controllers with several logical
     blocks of GPIO inside them. This is several gpiochips per device in
     the device model, in contrast to the case when there is a 1-to-1
     relationship between a device and a gpiochip.

  New drivers:

   - Maxim MAX3191x industrial serializer, a very interesting piece of
     professional I/O hardware.

   - Uniphier GPIO driver. This is the GPIO block from the recent
     Socionext (ex Fujitsu and Panasonic) platform.

   - Tegra 186 driver. This is based on the new banked GPIO
     infrastructure.

  Other improvements:

   - Some documentation improvements.

   - Wakeup support for the DesignWare DWAPB GPIO controller.

   - Reset line support on the DesignWare DWAPB GPIO controller.

   - Several non-critical bug fixes and improvements for the Broadcom
     BRCMSTB driver.

   - Misc non-critical bug fixes like exotic errorpaths, removal of dead
     code etc.

   - Explicit comments on fall-through switch() statements"

* tag 'gpio-v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (65 commits)
  gpio: tegra186: Remove tegra186_gpio_lock_class
  gpio: rcar: Add r8a77995 (R-Car D3) support
  pinctrl: bcm2835: Fix some merge fallout
  gpio: Fix undefined lock_dep_class
  gpio: Automatically add lockdep keys
  gpio: Introduce struct gpio_irq_chip.first
  gpio: Disambiguate struct gpio_irq_chip.nested
  gpio: Add Tegra186 support
  gpio: Export gpiochip_irq_{map,unmap}()
  gpio: Implement tighter IRQ chip integration
  gpio: Move lock_key into struct gpio_irq_chip
  gpio: Move irq_valid_mask into struct gpio_irq_chip
  gpio: Move irq_nested into struct gpio_irq_chip
  gpio: Move irq_chained_parent to struct gpio_irq_chip
  gpio: Move irq_default_type to struct gpio_irq_chip
  gpio: Move irq_handler to struct gpio_irq_chip
  gpio: Move irqdomain into struct gpio_irq_chip
  gpio: Move irqchip into struct gpio_irq_chip
  gpio: Introduce struct gpio_irq_chip
  pinctrl: armada-37xx: remove unused variable
  ...
2017-11-14 17:23:44 -08:00

353 lines
9.6 KiB
C

/*
* AppliedMicro X-Gene SoC GPIO-Standby Driver
*
* Copyright (c) 2014, Applied Micro Circuits Corporation
* Author: Tin Huynh <tnhuynh@apm.com>.
* Y Vo <yvo@apm.com>.
* Quan Nguyen <qnguyen@apm.com>.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/module.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/of_gpio.h>
#include <linux/gpio/driver.h>
#include <linux/acpi.h>
#include "gpiolib.h"
/* Common property names */
#define XGENE_NIRQ_PROPERTY "apm,nr-irqs"
#define XGENE_NGPIO_PROPERTY "apm,nr-gpios"
#define XGENE_IRQ_START_PROPERTY "apm,irq-start"
#define XGENE_DFLT_MAX_NGPIO 22
#define XGENE_DFLT_MAX_NIRQ 6
#define XGENE_DFLT_IRQ_START_PIN 8
#define GPIO_MASK(x) (1U << ((x) % 32))
#define MPA_GPIO_INT_LVL 0x0290
#define MPA_GPIO_OE_ADDR 0x029c
#define MPA_GPIO_OUT_ADDR 0x02a0
#define MPA_GPIO_IN_ADDR 0x02a4
#define MPA_GPIO_SEL_LO 0x0294
#define GPIO_INT_LEVEL_H 0x000001
#define GPIO_INT_LEVEL_L 0x000000
/**
* struct xgene_gpio_sb - GPIO-Standby private data structure.
* @gc: memory-mapped GPIO controllers.
* @regs: GPIO register base offset
* @irq_domain: GPIO interrupt domain
* @irq_start: GPIO pin that start support interrupt
* @nirq: Number of GPIO pins that supports interrupt
* @parent_irq_base: Start parent HWIRQ
*/
struct xgene_gpio_sb {
struct gpio_chip gc;
void __iomem *regs;
struct irq_domain *irq_domain;
u16 irq_start;
u16 nirq;
u16 parent_irq_base;
};
#define HWIRQ_TO_GPIO(priv, hwirq) ((hwirq) + (priv)->irq_start)
#define GPIO_TO_HWIRQ(priv, gpio) ((gpio) - (priv)->irq_start)
static void xgene_gpio_set_bit(struct gpio_chip *gc,
void __iomem *reg, u32 gpio, int val)
{
u32 data;
data = gc->read_reg(reg);
if (val)
data |= GPIO_MASK(gpio);
else
data &= ~GPIO_MASK(gpio);
gc->write_reg(reg, data);
}
static int xgene_gpio_sb_irq_set_type(struct irq_data *d, unsigned int type)
{
struct xgene_gpio_sb *priv = irq_data_get_irq_chip_data(d);
int gpio = HWIRQ_TO_GPIO(priv, d->hwirq);
int lvl_type = GPIO_INT_LEVEL_H;
switch (type & IRQ_TYPE_SENSE_MASK) {
case IRQ_TYPE_EDGE_RISING:
case IRQ_TYPE_LEVEL_HIGH:
lvl_type = GPIO_INT_LEVEL_H;
break;
case IRQ_TYPE_EDGE_FALLING:
case IRQ_TYPE_LEVEL_LOW:
lvl_type = GPIO_INT_LEVEL_L;
break;
default:
break;
}
xgene_gpio_set_bit(&priv->gc, priv->regs + MPA_GPIO_SEL_LO,
gpio * 2, 1);
xgene_gpio_set_bit(&priv->gc, priv->regs + MPA_GPIO_INT_LVL,
d->hwirq, lvl_type);
/* Propagate IRQ type setting to parent */
if (type & IRQ_TYPE_EDGE_BOTH)
return irq_chip_set_type_parent(d, IRQ_TYPE_EDGE_RISING);
else
return irq_chip_set_type_parent(d, IRQ_TYPE_LEVEL_HIGH);
}
static struct irq_chip xgene_gpio_sb_irq_chip = {
.name = "sbgpio",
.irq_eoi = irq_chip_eoi_parent,
.irq_mask = irq_chip_mask_parent,
.irq_unmask = irq_chip_unmask_parent,
.irq_set_type = xgene_gpio_sb_irq_set_type,
};
static int xgene_gpio_sb_to_irq(struct gpio_chip *gc, u32 gpio)
{
struct xgene_gpio_sb *priv = gpiochip_get_data(gc);
struct irq_fwspec fwspec;
if ((gpio < priv->irq_start) ||
(gpio > HWIRQ_TO_GPIO(priv, priv->nirq)))
return -ENXIO;
fwspec.fwnode = gc->parent->fwnode;
fwspec.param_count = 2;
fwspec.param[0] = GPIO_TO_HWIRQ(priv, gpio);
fwspec.param[1] = IRQ_TYPE_NONE;
return irq_create_fwspec_mapping(&fwspec);
}
static int xgene_gpio_sb_domain_activate(struct irq_domain *d,
struct irq_data *irq_data,
bool early)
{
struct xgene_gpio_sb *priv = d->host_data;
u32 gpio = HWIRQ_TO_GPIO(priv, irq_data->hwirq);
if (gpiochip_lock_as_irq(&priv->gc, gpio)) {
dev_err(priv->gc.parent,
"Unable to configure XGene GPIO standby pin %d as IRQ\n",
gpio);
return -ENOSPC;
}
xgene_gpio_set_bit(&priv->gc, priv->regs + MPA_GPIO_SEL_LO,
gpio * 2, 1);
return 0;
}
static void xgene_gpio_sb_domain_deactivate(struct irq_domain *d,
struct irq_data *irq_data)
{
struct xgene_gpio_sb *priv = d->host_data;
u32 gpio = HWIRQ_TO_GPIO(priv, irq_data->hwirq);
gpiochip_unlock_as_irq(&priv->gc, gpio);
xgene_gpio_set_bit(&priv->gc, priv->regs + MPA_GPIO_SEL_LO,
gpio * 2, 0);
}
static int xgene_gpio_sb_domain_translate(struct irq_domain *d,
struct irq_fwspec *fwspec,
unsigned long *hwirq,
unsigned int *type)
{
struct xgene_gpio_sb *priv = d->host_data;
if ((fwspec->param_count != 2) ||
(fwspec->param[0] >= priv->nirq))
return -EINVAL;
*hwirq = fwspec->param[0];
*type = fwspec->param[1];
return 0;
}
static int xgene_gpio_sb_domain_alloc(struct irq_domain *domain,
unsigned int virq,
unsigned int nr_irqs, void *data)
{
struct irq_fwspec *fwspec = data;
struct irq_fwspec parent_fwspec;
struct xgene_gpio_sb *priv = domain->host_data;
irq_hw_number_t hwirq;
unsigned int i;
hwirq = fwspec->param[0];
for (i = 0; i < nr_irqs; i++)
irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i,
&xgene_gpio_sb_irq_chip, priv);
parent_fwspec.fwnode = domain->parent->fwnode;
if (is_of_node(parent_fwspec.fwnode)) {
parent_fwspec.param_count = 3;
parent_fwspec.param[0] = 0;/* SPI */
/* Skip SGIs and PPIs*/
parent_fwspec.param[1] = hwirq + priv->parent_irq_base - 32;
parent_fwspec.param[2] = fwspec->param[1];
} else if (is_fwnode_irqchip(parent_fwspec.fwnode)) {
parent_fwspec.param_count = 2;
parent_fwspec.param[0] = hwirq + priv->parent_irq_base;
parent_fwspec.param[1] = fwspec->param[1];
} else
return -EINVAL;
return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs,
&parent_fwspec);
}
static const struct irq_domain_ops xgene_gpio_sb_domain_ops = {
.translate = xgene_gpio_sb_domain_translate,
.alloc = xgene_gpio_sb_domain_alloc,
.free = irq_domain_free_irqs_common,
.activate = xgene_gpio_sb_domain_activate,
.deactivate = xgene_gpio_sb_domain_deactivate,
};
static int xgene_gpio_sb_probe(struct platform_device *pdev)
{
struct xgene_gpio_sb *priv;
int ret;
struct resource *res;
void __iomem *regs;
struct irq_domain *parent_domain = NULL;
u32 val32;
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(regs))
return PTR_ERR(regs);
priv->regs = regs;
ret = platform_get_irq(pdev, 0);
if (ret > 0) {
priv->parent_irq_base = irq_get_irq_data(ret)->hwirq;
parent_domain = irq_get_irq_data(ret)->domain;
}
if (!parent_domain) {
dev_err(&pdev->dev, "unable to obtain parent domain\n");
return -ENODEV;
}
ret = bgpio_init(&priv->gc, &pdev->dev, 4,
regs + MPA_GPIO_IN_ADDR,
regs + MPA_GPIO_OUT_ADDR, NULL,
regs + MPA_GPIO_OE_ADDR, NULL, 0);
if (ret)
return ret;
priv->gc.to_irq = xgene_gpio_sb_to_irq;
/* Retrieve start irq pin, use default if property not found */
priv->irq_start = XGENE_DFLT_IRQ_START_PIN;
if (!device_property_read_u32(&pdev->dev,
XGENE_IRQ_START_PROPERTY, &val32))
priv->irq_start = val32;
/* Retrieve number irqs, use default if property not found */
priv->nirq = XGENE_DFLT_MAX_NIRQ;
if (!device_property_read_u32(&pdev->dev, XGENE_NIRQ_PROPERTY, &val32))
priv->nirq = val32;
/* Retrieve number gpio, use default if property not found */
priv->gc.ngpio = XGENE_DFLT_MAX_NGPIO;
if (!device_property_read_u32(&pdev->dev, XGENE_NGPIO_PROPERTY, &val32))
priv->gc.ngpio = val32;
dev_info(&pdev->dev, "Support %d gpios, %d irqs start from pin %d\n",
priv->gc.ngpio, priv->nirq, priv->irq_start);
platform_set_drvdata(pdev, priv);
priv->irq_domain = irq_domain_create_hierarchy(parent_domain,
0, priv->nirq, pdev->dev.fwnode,
&xgene_gpio_sb_domain_ops, priv);
if (!priv->irq_domain)
return -ENODEV;
priv->gc.irq.domain = priv->irq_domain;
ret = devm_gpiochip_add_data(&pdev->dev, &priv->gc, priv);
if (ret) {
dev_err(&pdev->dev,
"failed to register X-Gene GPIO Standby driver\n");
irq_domain_remove(priv->irq_domain);
return ret;
}
dev_info(&pdev->dev, "X-Gene GPIO Standby driver registered\n");
if (priv->nirq > 0) {
/* Register interrupt handlers for gpio signaled acpi events */
acpi_gpiochip_request_interrupts(&priv->gc);
}
return ret;
}
static int xgene_gpio_sb_remove(struct platform_device *pdev)
{
struct xgene_gpio_sb *priv = platform_get_drvdata(pdev);
if (priv->nirq > 0) {
acpi_gpiochip_free_interrupts(&priv->gc);
}
irq_domain_remove(priv->irq_domain);
return 0;
}
static const struct of_device_id xgene_gpio_sb_of_match[] = {
{.compatible = "apm,xgene-gpio-sb", },
{},
};
MODULE_DEVICE_TABLE(of, xgene_gpio_sb_of_match);
#ifdef CONFIG_ACPI
static const struct acpi_device_id xgene_gpio_sb_acpi_match[] = {
{"APMC0D15", 0},
{},
};
MODULE_DEVICE_TABLE(acpi, xgene_gpio_sb_acpi_match);
#endif
static struct platform_driver xgene_gpio_sb_driver = {
.driver = {
.name = "xgene-gpio-sb",
.of_match_table = xgene_gpio_sb_of_match,
.acpi_match_table = ACPI_PTR(xgene_gpio_sb_acpi_match),
},
.probe = xgene_gpio_sb_probe,
.remove = xgene_gpio_sb_remove,
};
module_platform_driver(xgene_gpio_sb_driver);
MODULE_AUTHOR("AppliedMicro");
MODULE_DESCRIPTION("APM X-Gene GPIO Standby driver");
MODULE_LICENSE("GPL");