linux/arch/powerpc/platforms/85xx/smp.c
Kumar Gala 4511680613 powerpc/85xx: Setup secondary cores PIR with hard SMP id
Normally logical and hard cpu ID are the same, however in same cases like
on the P3060 they may differ.  Where the logical is 0..5, the hard id
goes 0,1,4..7.  This can causes issues for places we utilize PIR to index
into array like in debug exception handlers for finding the exception
stack.

Move to setting up PIR with hard_smp_processor_id fixes the issue.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-13 10:19:22 -05:00

258 lines
6.2 KiB
C

/*
* Author: Andy Fleming <afleming@freescale.com>
* Kumar Gala <galak@kernel.crashing.org>
*
* Copyright 2006-2008, 2011 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/of.h>
#include <linux/kexec.h>
#include <linux/highmem.h>
#include <asm/machdep.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/mpic.h>
#include <asm/cacheflush.h>
#include <asm/dbell.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/mpic.h>
extern void __early_start(void);
#define BOOT_ENTRY_ADDR_UPPER 0
#define BOOT_ENTRY_ADDR_LOWER 1
#define BOOT_ENTRY_R3_UPPER 2
#define BOOT_ENTRY_R3_LOWER 3
#define BOOT_ENTRY_RESV 4
#define BOOT_ENTRY_PIR 5
#define BOOT_ENTRY_R6_UPPER 6
#define BOOT_ENTRY_R6_LOWER 7
#define NUM_BOOT_ENTRY 8
#define SIZE_BOOT_ENTRY (NUM_BOOT_ENTRY * sizeof(u32))
static int __init
smp_85xx_kick_cpu(int nr)
{
unsigned long flags;
const u64 *cpu_rel_addr;
__iomem u32 *bptr_vaddr;
struct device_node *np;
int n = 0, hw_cpu = get_hard_smp_processor_id(nr);
int ioremappable;
WARN_ON(nr < 0 || nr >= NR_CPUS);
WARN_ON(hw_cpu < 0 || hw_cpu >= NR_CPUS);
pr_debug("smp_85xx_kick_cpu: kick CPU #%d\n", nr);
np = of_get_cpu_node(nr, NULL);
cpu_rel_addr = of_get_property(np, "cpu-release-addr", NULL);
if (cpu_rel_addr == NULL) {
printk(KERN_ERR "No cpu-release-addr for cpu %d\n", nr);
return -ENOENT;
}
/*
* A secondary core could be in a spinloop in the bootpage
* (0xfffff000), somewhere in highmem, or somewhere in lowmem.
* The bootpage and highmem can be accessed via ioremap(), but
* we need to directly access the spinloop if its in lowmem.
*/
ioremappable = *cpu_rel_addr > virt_to_phys(high_memory);
/* Map the spin table */
if (ioremappable)
bptr_vaddr = ioremap(*cpu_rel_addr, SIZE_BOOT_ENTRY);
else
bptr_vaddr = phys_to_virt(*cpu_rel_addr);
local_irq_save(flags);
out_be32(bptr_vaddr + BOOT_ENTRY_PIR, hw_cpu);
#ifdef CONFIG_PPC32
out_be32(bptr_vaddr + BOOT_ENTRY_ADDR_LOWER, __pa(__early_start));
if (!ioremappable)
flush_dcache_range((ulong)bptr_vaddr,
(ulong)(bptr_vaddr + SIZE_BOOT_ENTRY));
/* Wait a bit for the CPU to ack. */
while ((__secondary_hold_acknowledge != hw_cpu) && (++n < 1000))
mdelay(1);
#else
smp_generic_kick_cpu(nr);
out_be64((u64 *)(bptr_vaddr + BOOT_ENTRY_ADDR_UPPER),
__pa((u64)*((unsigned long long *) generic_secondary_smp_init)));
if (!ioremappable)
flush_dcache_range((ulong)bptr_vaddr,
(ulong)(bptr_vaddr + SIZE_BOOT_ENTRY));
#endif
local_irq_restore(flags);
if (ioremappable)
iounmap(bptr_vaddr);
pr_debug("waited %d msecs for CPU #%d.\n", n, nr);
return 0;
}
struct smp_ops_t smp_85xx_ops = {
.kick_cpu = smp_85xx_kick_cpu,
#ifdef CONFIG_KEXEC
.give_timebase = smp_generic_give_timebase,
.take_timebase = smp_generic_take_timebase,
#endif
};
#ifdef CONFIG_KEXEC
atomic_t kexec_down_cpus = ATOMIC_INIT(0);
void mpc85xx_smp_kexec_cpu_down(int crash_shutdown, int secondary)
{
local_irq_disable();
if (secondary) {
atomic_inc(&kexec_down_cpus);
/* loop forever */
while (1);
}
}
static void mpc85xx_smp_kexec_down(void *arg)
{
if (ppc_md.kexec_cpu_down)
ppc_md.kexec_cpu_down(0,1);
}
static void map_and_flush(unsigned long paddr)
{
struct page *page = pfn_to_page(paddr >> PAGE_SHIFT);
unsigned long kaddr = (unsigned long)kmap(page);
flush_dcache_range(kaddr, kaddr + PAGE_SIZE);
kunmap(page);
}
/**
* Before we reset the other cores, we need to flush relevant cache
* out to memory so we don't get anything corrupted, some of these flushes
* are performed out of an overabundance of caution as interrupts are not
* disabled yet and we can switch cores
*/
static void mpc85xx_smp_flush_dcache_kexec(struct kimage *image)
{
kimage_entry_t *ptr, entry;
unsigned long paddr;
int i;
if (image->type == KEXEC_TYPE_DEFAULT) {
/* normal kexec images are stored in temporary pages */
for (ptr = &image->head; (entry = *ptr) && !(entry & IND_DONE);
ptr = (entry & IND_INDIRECTION) ?
phys_to_virt(entry & PAGE_MASK) : ptr + 1) {
if (!(entry & IND_DESTINATION)) {
map_and_flush(entry);
}
}
/* flush out last IND_DONE page */
map_and_flush(entry);
} else {
/* crash type kexec images are copied to the crash region */
for (i = 0; i < image->nr_segments; i++) {
struct kexec_segment *seg = &image->segment[i];
for (paddr = seg->mem; paddr < seg->mem + seg->memsz;
paddr += PAGE_SIZE) {
map_and_flush(paddr);
}
}
}
/* also flush the kimage struct to be passed in as well */
flush_dcache_range((unsigned long)image,
(unsigned long)image + sizeof(*image));
}
static void mpc85xx_smp_machine_kexec(struct kimage *image)
{
int timeout = INT_MAX;
int i, num_cpus = num_present_cpus();
mpc85xx_smp_flush_dcache_kexec(image);
if (image->type == KEXEC_TYPE_DEFAULT)
smp_call_function(mpc85xx_smp_kexec_down, NULL, 0);
while ( (atomic_read(&kexec_down_cpus) != (num_cpus - 1)) &&
( timeout > 0 ) )
{
timeout--;
}
if ( !timeout )
printk(KERN_ERR "Unable to bring down secondary cpu(s)");
for (i = 0; i < num_cpus; i++)
{
if ( i == smp_processor_id() ) continue;
mpic_reset_core(i);
}
default_machine_kexec(image);
}
#endif /* CONFIG_KEXEC */
static void __init
smp_85xx_setup_cpu(int cpu_nr)
{
if (smp_85xx_ops.probe == smp_mpic_probe)
mpic_setup_this_cpu();
if (cpu_has_feature(CPU_FTR_DBELL))
doorbell_setup_this_cpu();
}
void __init mpc85xx_smp_init(void)
{
struct device_node *np;
smp_85xx_ops.setup_cpu = smp_85xx_setup_cpu;
np = of_find_node_by_type(NULL, "open-pic");
if (np) {
smp_85xx_ops.probe = smp_mpic_probe;
smp_85xx_ops.message_pass = smp_mpic_message_pass;
}
if (cpu_has_feature(CPU_FTR_DBELL)) {
/*
* If left NULL, .message_pass defaults to
* smp_muxed_ipi_message_pass
*/
smp_85xx_ops.message_pass = NULL;
smp_85xx_ops.cause_ipi = doorbell_cause_ipi;
}
smp_ops = &smp_85xx_ops;
#ifdef CONFIG_KEXEC
ppc_md.kexec_cpu_down = mpc85xx_smp_kexec_cpu_down;
ppc_md.machine_kexec = mpc85xx_smp_machine_kexec;
#endif
}