leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
43bac4133f
linux/arch/arm/mach-omap2
History
Linus Torvalds a771151a83 ARM: SoC cleanups for v4.9 
The cleanups for v4.9 are a little larger that usual, but thankfully
 that is almost exclusively due to removing a significant number of
 files that have become obsolete after the still ongoing conversion
 of old board files to devicetree.
 
 - for mach-omap2, which is still the largest platform in arch/arm/,
   the conversion to DT is finally complete after the Nokia N900 is
   now fully supported there, along with the omap3 LDP, and we can
   remove those two board files.
   If no regressions are found, another large cleanup for the platform
   will happen as a follow-up, removing dead code and restructuring
   the platform based on being DT-only.
 
 - In mach-imx, similar work is ongoing, but has not come that far.
   This time, we remove the obsolete board file for the i.MX1
   generation, which like i.MX25, i.MX5, i.MX6, and i.MX7 is now DT-only.
   The remaining board files are for i.MX2 and i.MX3 machines
   based on old ARM926 or ARM1136 cores that should work with DT
   in principle.
 
 - realview has just been converted from board files to DT, and a lot
   of code gets removed in the process. This is the last
   ARM/Keil/Versatile derived platform that was still using board
   files, the other ones being integrator, versatile and vexpress.
   We can probably merge the remaining code into a single directory
   in the near future.
 
 - clps711x had completed the conversion in v4.8, but we accidentally
   left the files in place that should have been deleted then.
 
 Conflicts: two files deleted here have been modified upstream,
 the changes can be discarded.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAV/guBGCrR//JCVInAQJoaQ/+N42zjmqDg6zO2JSs3q793AHskllT7kJo
 2G36Afl3hOZqy2TFF8nq5Iv8/hb45+3bHBIlq+JrOq5Fep3wFVfT0d1HMQ8UG6+K
 jSMikItIZkOJdmjuZLEBzhjUFIEIpIrSuSY1Pej5Sy8zDzxT+n68gVqcm/qxa2w6
 gPThdL69/XDo7JkF9TbYn0nrECey3ps9XnikNITWyQTrvCmlDVtGp6B+Cwi4cyvh
 FfJ690GAJU3/9op+xLomtEt1sli/+xJUdpH0IktfuNrc/2i96NsiUgPbqprIP6C6
 rGRN40tDClYa1viRexZlZdkCd7nH9PC+VCC59FONYiY8WmpwtNPVZ8px4D/rv7AX
 GHDnqeVbzUK/CMxRsQC0bnvQnD/oDqkSkDD7ixzfUh2TQiJASXvuj1vOej5k06Vc
 KFkpjh1dSZkehkUp106F2Obm8Sh7nNoG2olzrlzlza97OuYxAEBungIn95vjYbUj
 IRrTQdKgv3gVVGXzHjH7TMr46MZLk6K4mHjDeuQr/NN8JyPH0uLTy6pjsdXRWCvO
 sIWVhyMohKMU2q5NeBWmY0OtDje93JchRVeKfRaQ3+YysPMUTBK5ZtI5GB9tsM14
 7/GA7MO4FA0MZWW2E/GllQzgreaokUzTxBbhANzcEyjGh9OEx4gYaSF68PRy/HBa
 TlhH1PR3PNg=
 =WaLy
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Arnd Bergmann:
 "The cleanups for v4.9 are a little larger that usual, but thankfully
  that is almost exclusively due to removing a significant number of
  files that have become obsolete after the still ongoing conversion of
  old board files to devicetree.

   - for mach-omap2, which is still the largest platform in arch/arm/,
     the conversion to DT is finally complete after the Nokia N900 is
     now fully supported there, along with the omap3 LDP, and we can
     remove those two board files. If no regressions are found, another
     large cleanup for the platform will happen as a follow-up, removing
     dead code and restructuring the platform based on being DT-only.

   - In mach-imx, similar work is ongoing, but has not come that far.
     This time, we remove the obsolete board file for the i.MX1
     generation, which like i.MX25, i.MX5, i.MX6, and i.MX7 is now
     DT-only. The remaining board files are for i.MX2 and i.MX3 machines
     based on old ARM926 or ARM1136 cores that should work with DT in
     principle.

   - realview has just been converted from board files to DT, and a lot
     of code gets removed in the process. This is the last
     ARM/Keil/Versatile derived platform that was still using board
     files, the other ones being integrator, versatile and vexpress. We
     can probably merge the remaining code into a single directory in
     the near future.

   - clps711x had completed the conversion in v4.8, but we accidentally
     left the files in place that should have been deleted then"

* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits)
  ARM: select PCI_DOMAINS config from ARCH_MULTIPLATFORM
  ARM: stop *MIGHT_HAVE_PCI* config from being selected redundantly
  ARM: imx: (trivial) fix typo and grammar
  ARM: clps711x: remove extraneous files
  ARM: imx: use IS_ENABLED() instead of checking for built-in or module
  ARM: OMAP2+: use IS_ENABLED() instead of checking for built-in or module
  ARM: OMAP1: use IS_ENABLED() instead of checking for built-in or module
  ARM: imx: remove platform-mxc_rnga
  ARM: realview: imply device tree boot
  ARM: realview: no need to select SMP_ON_UP explicitly
  ARM: realview: delete the RealView board files
  ARM: imx: no need to select SMP_ON_UP explicitly
  ARM: i.MX: Move SOC_IMX1 into 'Device tree only'
  ARM: i.MX: Remove i.MX1 non-DT support
  ARM: i.MX: Remove i.MX1 Synertronixx SCB9328 board support
  ARM: i.MX: Remove i.MX1 Armadeus APF9328 board support
  ARM: mxs: remove obsolete startup code for TX28
  ARM: i.MX31 iomux: remove duplicates with alternate name
  ARM: i.MX31 iomux: remove plain duplicates
  ARM: OMAP2+: Drop legacy board file for LDP
  ...
2016-10-07 21:16:16 -07:00
..
include/mach ARM: omap2: restore OMAP4 barrier behaviour 2015-07-25 15:28:16 +01:00
am33xx-restart.c ARM: OMAP2+: PRM: provide generic API for system reset 2014-10-27 08:39:26 -07:00
am33xx.h
board-flash.c ARM: OMAP2+: use IS_ENABLED() instead of checking for built-in or module 2016-08-26 08:42:35 -07:00
board-flash.h ARM: OMAP2+: use IS_ENABLED() instead of checking for built-in or module 2016-08-26 08:42:35 -07:00
board-generic.c ARM: OMAP2+: Set system_rev from ATAGS for n900 2016-02-10 16:17:15 -08:00
board-n8x0.c ARM: OMAP2+: use IS_ENABLED() instead of checking for built-in or module 2016-08-26 08:42:35 -07:00
clkt2xxx_dpll.c
clkt2xxx_dpllcore.c ARM: OMAP2+: raw read and write endian fix 2014-05-08 07:09:53 -07:00
clkt2xxx_virt_prcm_set.c ARM: omap2: use clkdev_create() 2015-05-06 11:58:58 +01:00
clock2xxx.h ARM: OMAP2: clock: remove unused apll code 2015-01-07 10:54:40 -08:00
clock3xxx.h CLK: TI: add omap3 clock init file 2014-01-17 12:35:48 -08:00
clock.c clk: ti: omap5+: dpll: implement errata i810 2015-11-30 11:34:17 -08:00
clock.h clk: ti: move low-level access and init code under clock driver 2015-06-02 12:31:46 +03:00
clockdomain.c ARM: OMAP2+: clockdomain: add usecounting support to autoidle APIs 2016-07-04 07:15:38 -07:00
clockdomain.h ARM: OMAP2+: clockdomain: add usecounting support to autoidle APIs 2016-07-04 07:15:38 -07:00
clockdomains2xxx_3xxx_data.c
clockdomains3xxx_data.c ARM: OMAP3: fix iva mmu programming issues 2014-03-12 09:48:26 -07:00
clockdomains7xx_data.c ARM: DRA7: clockdomain: Implement timer workaround for errata i874 2016-04-10 11:43:57 -06:00
clockdomains33xx_data.c
clockdomains43xx_data.c ARM: OMAP2+: CM: AM43x clockdomain data 2013-10-13 22:48:36 -06:00
clockdomains44xx_data.c
clockdomains54xx_data.c
clockdomains81xx_data.c ARM: OMAP2+: Update 81xx clock and power domains for default, active and sgx 2015-12-22 16:23:08 -08:00
clockdomains2420_data.c
clockdomains2430_data.c
cm1_7xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm1_44xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm1_54xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm2_7xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm2_44xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm2_54xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm2xxx_3xxx.h ARM: OMAP2+: raw read and write endian fix 2014-05-08 07:09:53 -07:00
cm2xxx.c ARM: OMAP2+: CM: move SoC specific init calls within a generic API 2015-03-31 21:26:50 +03:00
cm2xxx.h ARM: OMAP2+: CM: move SoC specific init calls within a generic API 2015-03-31 21:26:50 +03:00
cm3xxx.c ARM: OMAP2+: Fix typo in cm3xxx.c 2016-06-10 04:14:37 -07:00
cm3xxx.h ARM: OMAP2+: CM: move SoC specific init calls within a generic API 2015-03-31 21:26:50 +03:00
cm33xx.c ARM: OMAP4+: CM: Remove redundant checks for clkctrl_offs of zero 2016-07-22 23:10:57 -07:00
cm33xx.h ARM: OMAP2+: CM: move SoC specific init calls within a generic API 2015-03-31 21:26:50 +03:00
cm44xx.h ARM: OMAP2+: CM: move SoC specific init calls within a generic API 2015-03-31 21:26:50 +03:00
cm81xx.h ARM: OMAP2+: Update 81xx clock and power domains for default, active and sgx 2015-12-22 16:23:08 -08:00
cm_common.c ARM: OMAP2+: clock: add low-level support for regmap 2015-03-31 21:26:55 +03:00
cm-regbits-7xx.h ARM: OMAP: DRA7: CM: Add minimal regbit shifts 2013-08-23 04:28:36 -06:00
cm-regbits-24xx.h ARM: OMAP2: convert sys_ck and osc_ck to standard clock types 2014-07-02 14:26:06 +03:00
cm-regbits-33xx.h ARM: OMAP3: PRM/CM: Cleanup unused header 2013-07-21 22:10:03 -06:00
cm-regbits-34xx.h ARM: OMAP3: PRM/CM: Add back macros used by TI DSP/Bridge driver 2014-07-06 15:51:23 -06:00
cm-regbits-44xx.h ARM: OMAP4: PRM/CM: Cleanup unused header 2013-07-21 22:10:14 -06:00
cm-regbits-54xx.h ARM: OMAP5: PRM/CM: Cleanup unused header 2013-07-21 22:10:25 -06:00
cm.h ARM: OMAP2+: CM: determine CM base address from device tree 2015-03-27 10:55:57 +02:00
cminst44xx.c ARM: OMAP4+: CM: Remove redundant checks for clkctrl_offs of zero 2016-07-22 23:10:57 -07:00
common-board-devices.c ARM: OMAP2+: use IS_ENABLED() instead of checking for built-in or module 2016-08-26 08:42:35 -07:00
common-board-devices.h arm: omap2: n8x0: move i2c devices to DT 2014-09-16 14:43:11 -07:00
common.c Revert "ARM: OMAP4: remove dead kconfig option OMAP4_ERRATA_I688" 2015-07-25 15:28:14 +01:00
common.h ARM: OMAP4+: Allow kexec on SMP variants 2016-06-22 22:57:02 -07:00
control.c ARM: OMAP2+: Fix out of range register access with syscon_config.max_register 2016-02-22 09:22:38 -08:00
control.h ARM: OMAP3: Add support for configuring MMC pins as GPIO pins 2015-05-20 09:23:43 -07:00
cpuidle34xx.c ARM: OMAP3: Add cpuidle parameters table for omap3430 2016-02-19 10:35:39 -08:00
cpuidle44xx.c ARM: OMAP2+: clockdomain: add usecounting support to autoidle APIs 2016-07-04 07:15:38 -07:00
ctrl_module_wkup_44xx.h
devices.c ARM: OMAP2+: use IS_ENABLED() instead of checking for built-in or module 2016-08-26 08:42:35 -07:00
display.c ARM: OMAP2: Use the platform_data header for omapdss 2016-06-03 16:01:01 +03:00
display.h ARM/video: omap2: Move omap_display_init declaration to mach-omap2/display.h 2016-06-03 16:00:31 +03:00
dma.c ARM: OMAP2+: DMA: Provide dma_slave_map to omap-dma for legacy boot 2016-02-22 10:00:50 -08:00
drm.c ARM: OMAP2+: use IS_ENABLED() instead of checking for built-in or module 2016-08-26 08:42:35 -07:00
dss-common.c ARM: OMAP2: Use the platform_data header for omapdss 2016-06-03 16:01:01 +03:00
dss-common.h ARM: OMAP2+: pdata-quirks: add legacy display init for IGEPv2 board 2013-10-09 07:54:34 -07:00
fb.c ARM: OMAP2+: use IS_ENABLED() instead of checking for built-in or module 2016-08-26 08:42:35 -07:00
gpio.c
gpmc-nand.c mtd: nand: omap: Clean up device tree support 2016-04-15 11:53:36 +03:00
gpmc-onenand.c ARM: OMAP2+: Fix onenand initialization to avoid filesystem corruption 2016-02-22 09:24:10 -08:00
gpmc-smsc911x.c ARM: OMAP2+: smsc911x: fix return value check in gpmc_smsc911x_init() 2013-11-14 10:40:36 -08:00
gpmc-smsc911x.h ARM: OMAP2+: use IS_ENABLED() instead of checking for built-in or module 2016-08-26 08:42:35 -07:00
gpmc.h ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header 2014-11-20 12:11:25 -08:00
hdq1w.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
hdq1w.h
hsmmc.c ARM: OMAP2+: use IS_ENABLED() instead of checking for built-in or module 2016-08-26 08:42:35 -07:00
hsmmc.h ARM: OMAP2+: use IS_ENABLED() instead of checking for built-in or module 2016-08-26 08:42:35 -07:00
i2c.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
i2c.h
id.c Revert "ARM: OMAP: Catch callers of revision information prior to it being populated" 2016-04-19 08:01:05 -07:00
id.h
io.c ARM: OMAP4+: Prevent CPU1 related hang with kexec 2016-06-22 22:55:51 -07:00
iomap.h ARM: DRA7: Provide proper IO map table 2015-07-16 00:06:05 -07:00
Kconfig Remove the last two legacy board-*.c files for omap3 for legacy 2016-09-02 18:30:29 +02:00
l3_2xxx.h
l3_3xxx.h
l4_2xxx.h
l4_3xxx.h
Makefile Remove the last two legacy board-*.c files for omap3 for legacy 2016-09-02 18:30:29 +02:00
mcbsp.c ARM: OMAP2+: McBSP: Remove the old iclk allow/deny idle code 2016-06-10 05:07:25 -07:00
mmc.h ARM: OMAP2: MMC: include mmc-omap platform header directly 2014-11-26 14:30:53 +01:00
msdi.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
mux34xx.c ARM: OMAP2+: Fix typo in mux34xx.c 2016-06-10 04:15:33 -07:00
mux34xx.h
mux.c ARM: OMAP2+: remove superfluous NULL pointer check 2015-03-26 10:33:25 -07:00
mux.h ARM: OMAP2+: remove OMAP_PACKAGE_ZAC and OMAP_PACKAGE_ZAF 2014-02-28 15:36:34 -08:00
omap2-restart.c ARM: OMAP2+: Change core_initcall levels to postcore_initcall 2015-12-03 11:38:09 -08:00
omap3-restart.c ARM: OMAP2+: sparse: add missing function declarations 2015-07-15 23:43:41 -06:00
omap4-common.c ARM: OMAP4+: Initialize SAR RAM base early for proper CPU1 reset for kexec 2016-06-22 22:55:47 -07:00
omap4-restart.c ARM: OMAP2+: sparse: add missing function declarations 2015-07-15 23:43:41 -06:00
omap4-sar-layout.h
omap24xx.h
omap34xx.h [media] omap3isp: Replace many MMIO regions by two 2015-04-02 16:45:07 -03:00
omap44xx.h
omap54xx.h ARM: DRA7: Provide proper IO map table 2015-07-16 00:06:05 -07:00
omap_device.c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2016-08-03 07:26:11 -04:00
omap_device.h ARM: OMAP2+: omap_device: add fail hook for runtime_pm when bad data is detected 2013-12-10 09:39:52 -08:00
omap_hwmod_2xxx_3xxx_interconnect_data.c ARM: OMAP2: hwmod_data: Remove legacy mailbox data and addrs 2014-07-15 05:08:56 -07:00
omap_hwmod_2xxx_3xxx_ipblock_data.c ARM: AM43xx: hwmod: add DSS hwmod data 2014-07-05 17:44:57 -06:00
omap_hwmod_2xxx_interconnect_data.c ARM: OMAP2+: Remove legacy hwmod entries for omap2 2013-11-25 15:31:18 -08:00
omap_hwmod_2xxx_ipblock_data.c ARM: OMAP2+: sparse: add missing static declaration 2015-07-15 23:42:12 -06:00
omap_hwmod_3xxx_data.c ARM: OMAP3: hwmod data: Add sysc information for DSI 2016-07-22 23:05:34 -07:00
omap_hwmod_7xx_data.c ARM: DRA7: hwmod: remove DSS addresses from hwmod 2016-06-10 05:10:52 -07:00
omap_hwmod_33xx_43xx_common_data.h ARM: AM335x/AM437x: hwmod: Remove eQEP, ePWM and eCAP hwmod entries 2016-06-10 05:02:34 -07:00
omap_hwmod_33xx_43xx_interconnect_data.c ARM: AM335x/AM437x: hwmod: Remove eQEP, ePWM and eCAP hwmod entries 2016-06-10 05:02:34 -07:00
omap_hwmod_33xx_43xx_ipblock_data.c ARM: OMAP2+: AM33XX: Add HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET flag to rtc hwmod 2016-07-22 23:09:42 -07:00
omap_hwmod_33xx_data.c ARM: AM335x/AM437x: hwmod: Remove eQEP, ePWM and eCAP hwmod entries 2016-06-10 05:02:34 -07:00
omap_hwmod_43xx_data.c ARM: AM335x/AM437x: hwmod: Remove eQEP, ePWM and eCAP hwmod entries 2016-06-10 05:02:34 -07:00
omap_hwmod_44xx_data.c ARM: omap4: hwmod: Remove elm address space from hwmod data 2015-11-30 13:18:37 -08:00
omap_hwmod_54xx_data.c ARM: OMAP: Remove duplicated operand in OR operation 2015-10-20 01:29:40 -06:00
omap_hwmod_81xx_data.c ARM: OMAP: make ti81xx_rtc_hwmod static 2016-06-22 03:05:18 -07:00
omap_hwmod_2420_data.c ARM: OMAP2: hwmod_data: Remove legacy mailbox data and addrs 2014-07-15 05:08:56 -07:00
omap_hwmod_2430_data.c ARM: OMAP1/2+: MMC: separate platform data for mmc and mmc hs driver 2014-11-26 14:30:53 +01:00
omap_hwmod_common_data.c
omap_hwmod_common_data.h ARM: OMAP2: hwmod_data: Remove legacy mailbox data and addrs 2014-07-15 05:08:56 -07:00
omap_hwmod_common_ipblock_data.c ARM: AM43xx: hwmod: add DSS hwmod data 2014-07-05 17:44:57 -06:00
omap_hwmod_reset.c ARM: OMAP2+: hwmod: RTC: Add lock and unlock functions 2016-04-10 13:20:10 -06:00
omap_hwmod.c ARM: OMAP4+: Have _omap4_wait_target_* check for valid clkctrl_offs 2016-07-22 23:10:15 -07:00
omap_hwmod.h ARM: OMAP4+: hwmod: Add hwmod flag for HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET 2016-07-22 23:08:58 -07:00
omap_opp_data.h
omap_phy_internal.c ARM: OMAP2+: Remove unused ti81xx platform init code 2015-01-14 17:21:00 -08:00
omap_twl.c mfd: twl-core: Fix idle mode signaling for omaps when booted with device tree 2014-04-23 15:31:05 +01:00
omap-headsmp.S ARM: OMAP2+: Fix build if CONFIG_SMP is not set 2016-06-27 23:30:02 -07:00
omap-hotplug.c ARM: OMAP4+: Allow kexec on SMP variants 2016-06-22 22:57:02 -07:00
omap-mpuss-lowpower.c ARM: OMAP2+: Fix build with CONFIG_SMP and CONFIG_PM is not set 2016-07-03 23:29:45 -07:00
omap-pm-noop.c ARM: OMAP2+: omap-pm-noop.c: Remove some unused functions 2015-01-07 09:53:51 -08:00
omap-pm.h ARM: OMAP2+: omap-pm-noop.c: Remove some unused functions 2015-01-07 09:53:51 -08:00
omap-secure.c RX-51: Add support for OMAP3 ROM Random Number Generator 2013-10-08 12:02:12 -07:00
omap-secure.h ARM: OMAP5 / DRA7: Introduce workaround for 801819 2016-05-12 10:14:54 -07:00
omap-smc.S ARM: OMAP3: Add secure function omap_smc3() which calling instruction smc #1 2013-10-08 11:55:32 -07:00
omap-smp.c ARM: OMAP2+: clockdomain: add usecounting support to autoidle APIs 2016-07-04 07:15:38 -07:00
omap-wakeupgen.c ARM/OMAP/wakeupgen: Convert to hotplug state machine 2016-09-19 21:44:26 +02:00
omap-wakeupgen.h ARM: omap: convert wakeupgen to stacked domains 2015-03-15 00:56:13 +00:00
opp2xxx.h
opp3xxx_data.c
opp4xxx_data.c
opp2420_data.c
opp2430_data.c ARM: Show proper respect for Heinrich Hertz by using the correct unit for frequency 2015-05-14 16:22:05 +01:00
opp.c ACPI and power management updates for 3.13-rc1 2013-11-14 13:41:48 +09:00
pdata-quirks.c ARM: SoC driver updates for v4.8 2016-08-01 18:36:01 -04:00
pm24xx.c ARM: OMAP2+: Include clk.h 2015-07-20 10:52:36 -07:00
pm34xx.c ARM: OMAP3: Fix external abort on 36xx waking from off mode idle 2016-04-14 08:27:30 -07:00
pm44xx.c ARM: OMAP2+: Remove unneeded semicolons 2015-10-12 10:56:36 -07:00
pm-debug.c
pm.c ARM: OMAP2+: clockdomain: add usecounting support to autoidle APIs 2016-07-04 07:15:38 -07:00
pm.h ARM: OMAP4+: PM: erratum is used by OMAP5 and DRA7 as well 2015-09-14 12:14:47 -07:00
pmu.c ARM: OMAP2+: Remove calls to deprecacted marco,PTR_RET in the files,fb.c and pmu.c 2015-05-20 10:43:37 -07:00
powerdomain-common.c ARM: OMAP4: PRCM: remove references to cm-regbits-44xx.h from PRCM core files 2014-05-15 22:35:10 -06:00
powerdomain.c ARM: SoC platform updates for v4.8 2016-08-01 18:27:08 -04:00
powerdomain.h ARM: OMAP2+: powerdomain.c: Remove some unused functions 2015-01-07 09:53:51 -08:00
powerdomains2xxx_3xxx_data.c
powerdomains2xxx_3xxx_data.h
powerdomains2xxx_data.c
powerdomains3xxx_data.c ARM: OMAP2+: Update 81xx clock and power domains for default, active and sgx 2015-12-22 16:23:08 -08:00
powerdomains7xx_data.c ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_mem_ret 2016-06-13 01:04:01 -07:00
powerdomains33xx_data.c
powerdomains43xx_data.c ARM: OMAP2+: PM: AM43x powerdomain data 2013-10-13 22:48:25 -06:00
powerdomains44xx_data.c
powerdomains54xx_data.c ARM: OMAP5: powerdomain data: fix powerdomain powerstate 2014-09-08 11:22:40 -05:00
prcm43xx.h ARM: AM43XX: hwmod: Fix RSTST register offset for pruss 2016-06-22 02:55:44 -07:00
prcm44xx.h ARM: OMAP: DRA7: PRCM: Add DRA7XX local MPU PRCM regsiters 2013-08-23 04:28:36 -06:00
prcm_mpu7xx.h ARM: OMAP: DRA7: PRCM: Add DRA7XX local MPU PRCM regsiters 2013-08-23 04:28:36 -06:00
prcm_mpu44xx.c ARM: OMAP2+: raw read and write endian fix 2014-05-08 07:09:53 -07:00
prcm_mpu44xx.h ARM: OMAP2+: PRCM: cleanup some header includes 2014-05-15 22:34:48 -06:00
prcm_mpu54xx.h
prcm_mpu_44xx_54xx.h
prcm-common.h Merge branch 'dm814x-soc' into omap-for-v4.3/soc 2015-07-23 21:59:18 -07:00
prm2xxx_3xxx.c ARM: OMAP2+: PRM: add generic API for checking hardreset status 2014-10-27 08:39:25 -07:00
prm2xxx_3xxx.h ARM: OMAP2+: PRM: add generic API for checking hardreset status 2014-10-27 08:39:25 -07:00
prm2xxx.c ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm2xxx.h ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm3xxx.c ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm3xxx.h ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm7xx.h ARM: DRA7: hwmod: Add reset data for PCIe 2016-02-09 02:18:52 -07:00
prm33xx.c ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm33xx.h ARM: dts: am43xx: Remove wrongly defined RSTST offset for PER Domain 2016-06-22 03:33:25 -07:00
prm44xx_54xx.h ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm44xx.c ARM: OMAP4+: PRM: Add AM437x specific data 2015-07-23 06:08:24 -06:00
prm44xx.h ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm54xx.h ARM: OMAP2+: PRM: move SoC specific init calls within a generic API 2015-03-31 21:26:36 +03:00
prm_common.c ARM: OMAP2+: Fix randconfig build warning for dm814_pllss_data 2015-12-22 17:01:02 -08:00
prm-regbits-24xx.h ARM: OMAP2: PRM/CM: Cleanup unused header 2013-07-21 21:13:59 -06:00
prm-regbits-33xx.h ARM: OMAP2+: Add back the define for AM33XX_RST_GLOBAL_WARM_SW_MASK 2013-08-29 19:10:59 -07:00
prm-regbits-34xx.h ARM: OMAP2+: Fix omap off idle power consumption creeping up 2015-05-04 08:54:41 -07:00
prm-regbits-44xx.h ARM: OMAP2+: Fix omap off idle power consumption creeping up 2015-05-04 08:54:41 -07:00
prm.h ARM: OMAP4+: PRM: get rid of cpu_is_omap44xx calls from interrupt init 2015-03-31 21:26:53 +03:00
prminst44xx.c ARM: OMAP4+: PRM: add support for passing status register/bit info to reset 2015-05-08 13:05:15 -06:00
prminst44xx.h ARM: OMAP4+: PRM: determine prm_device_inst based on DT compatibility 2015-03-31 21:26:44 +03:00
scrm44xx.h
scrm54xx.h
sdram-hynix-h8mbx00u0mer-0em.h
sdram-micron-mt46h32m32lf-6.h
sdram-nokia.c
sdram-nokia.h
sdram-numonyx-m65kxxxxam.h
sdram-qimonda-hyb18m512160af-6.h
sdrc2xxx.c ARM: Show proper respect for Heinrich Hertz by using the correct unit for frequency 2015-05-14 16:22:05 +01:00
sdrc.c
sdrc.h ARM: OMAP2+: Fix typo in sdrc.h 2016-06-10 04:17:07 -07:00
serial.c ARM: OMAP: serial: Rename DRIVER_NAME 2016-02-06 23:13:30 -08:00
serial.h
sleep24xx.S
sleep34xx.S ARM: OMAP2+: Fix l2_inv_api_params for rodata 2016-01-22 08:26:08 -08:00
sleep44xx.S ARM: OMAP2+: Fix ppa_zero_params and ppa_por_params for rodata 2016-01-22 08:26:08 -08:00
smartreflex-class3.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
soc.h ARM: SoC platform updates for v4.7 2016-05-18 12:35:46 -07:00
sr_device.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
sram242x.S ARM: Show proper respect for Heinrich Hertz by using the correct unit for frequency 2015-05-14 16:22:05 +01:00
sram243x.S ARM: Show proper respect for Heinrich Hertz by using the correct unit for frequency 2015-05-14 16:22:05 +01:00
sram.c ARM: OMAP3: clock: remove un-used core dpll re-program code 2015-10-14 12:35:27 -07:00
sram.h ARM: OMAP3: clock: remove un-used core dpll re-program code 2015-10-14 12:35:27 -07:00
ti81xx-restart.c ARM: OMAP2+: Fix reboot for 81xx 2015-01-14 17:37:16 -08:00
ti81xx.h
timer.c ARM: SoC platform updates for v4.8 2016-08-01 18:27:08 -04:00
twl-common.c ARM: OMAP2+: use IS_ENABLED() instead of checking for built-in or module 2016-08-26 08:42:35 -07:00
twl-common.h
usb-host.c usb: phy: rename <linux/usb/usb_phy_gen_xceiv.h> to <linux/usb/usb_phy_generic.h> 2014-04-21 14:07:24 -05:00
usb-musb.c ARM: OMAP2+: Remove unused ti81xx platform init code 2015-01-14 17:21:00 -08:00
usb-tusb6010.c ARM OMAP2+ GPMC: calculate GPMCFCLKDIVIDER based on WAITMONITORINGTIME 2015-03-06 12:39:48 +02:00
usb.h ARM: OMAP2+: Remove unused ti81xx platform init code 2015-01-14 17:21:00 -08:00
vc3xxx_data.c ARM: OMAP2+: Fix omap off idle power consumption creeping up 2015-05-04 08:54:41 -07:00
vc44xx_data.c ARM: OMAP2+: Fix omap off idle power consumption creeping up 2015-05-04 08:54:41 -07:00
vc.c ARM: OMAP3: vc: Remove unused macros 2015-10-12 10:56:36 -07:00
vc.h ARM: OMAP2+: Fix omap off idle power consumption creeping up 2015-05-04 08:54:41 -07:00
voltage.c ARM: OMAP2+: voltage: Remove some unused functions 2015-01-07 09:53:51 -08:00
voltage.h ARM: OMAP2+: voltage: Remove some unused functions 2015-01-07 09:53:51 -08:00
voltagedomains2xxx_data.c
voltagedomains3xxx_data.c ARM: appropriate __init annotation for const data 2015-07-28 13:55:27 +02:00
voltagedomains44xx_data.c ARM: appropriate __init annotation for const data 2015-07-28 13:55:27 +02:00
voltagedomains54xx_data.c ARM: appropriate __init annotation for const data 2015-07-28 13:55:27 +02:00
vp3xxx_data.c ARM: OMAP3+: PRM: add common APIs for prm_vp_check/clear_txdone 2015-03-25 11:03:39 +02:00
vp44xx_data.c ARM: OMAP3+: PRM: add common APIs for prm_vp_check/clear_txdone 2015-03-25 11:03:39 +02:00
vp.c
vp.h ARM: OMAP3+: PRM: add common APIs for prm_vp_check/clear_txdone 2015-03-25 11:03:39 +02:00
wd_timer.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
wd_timer.h