forked from Minki/linux
7a839e9a27
Documentation for APM X-Gene standby GPIO controller DTS binding. Signed-off-by: Y Vo <yvo@apm.com> [Some spelling and various fixes] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
33 lines
988 B
Plaintext
33 lines
988 B
Plaintext
APM X-Gene Standby GPIO controller bindings
|
|
|
|
This is a gpio controller in the standby domain.
|
|
|
|
There are 20 GPIO pins from 0..21. There is no GPIO_DS14 or GPIO_DS15,
|
|
only GPIO_DS8..GPIO_DS13 support interrupts. The IRQ mapping
|
|
is currently 1-to-1 on interrupts 0x28 thru 0x2d.
|
|
|
|
Required properties:
|
|
- compatible: "apm,xgene-gpio-sb" for the X-Gene Standby GPIO controller
|
|
- reg: Physical base address and size of the controller's registers
|
|
- #gpio-cells: Should be two.
|
|
- first cell is the pin number
|
|
- second cell is used to specify the gpio polarity:
|
|
0 = active high
|
|
1 = active low
|
|
- gpio-controller: Marks the device node as a GPIO controller.
|
|
- interrupts: Shall contain exactly 6 interrupts.
|
|
|
|
Example:
|
|
sbgpio: sbgpio@17001000 {
|
|
compatible = "apm,xgene-gpio-sb";
|
|
reg = <0x0 0x17001000 0x0 0x400>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
interrupts = <0x0 0x28 0x1>,
|
|
<0x0 0x29 0x1>,
|
|
<0x0 0x2a 0x1>,
|
|
<0x0 0x2b 0x1>,
|
|
<0x0 0x2c 0x1>,
|
|
<0x0 0x2d 0x1>;
|
|
};
|