forked from Minki/linux
ee56884e77
The property name to pass names for interrupt resources is called "interrupt-names", not "interrupt-name". Fix it to avoid further confusion. Signed-off-by: Daniel Mack <zonque@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
57 lines
1.8 KiB
Plaintext
57 lines
1.8 KiB
Plaintext
* Marvell PXA GPIO controller
|
|
|
|
Required properties:
|
|
- compatible : Should be "intel,pxa25x-gpio", "intel,pxa26x-gpio",
|
|
"intel,pxa27x-gpio", "intel,pxa3xx-gpio",
|
|
"marvell,pxa93x-gpio", "marvell,mmp-gpio" or
|
|
"marvell,mmp2-gpio".
|
|
- reg : Address and length of the register set for the device
|
|
- interrupts : Should be the port interrupt shared by all gpio pins.
|
|
There're three gpio interrupts in arch-pxa, and they're gpio0,
|
|
gpio1 and gpio_mux. There're only one gpio interrupt in arch-mmp,
|
|
gpio_mux.
|
|
- interrupt-names : Should be the names of irq resources. Each interrupt
|
|
uses its own interrupt name, so there should be as many interrupt names
|
|
as referenced interrups.
|
|
- interrupt-controller : Identifies the node as an interrupt controller.
|
|
- #interrupt-cells: Specifies the number of cells needed to encode an
|
|
interrupt source.
|
|
- gpio-controller : Marks the device node as a gpio controller.
|
|
- #gpio-cells : Should be one. It is the pin number.
|
|
|
|
Example:
|
|
|
|
gpio: gpio@d4019000 {
|
|
compatible = "marvell,mmp-gpio";
|
|
reg = <0xd4019000 0x1000>;
|
|
interrupts = <49>;
|
|
interrupt-names = "gpio_mux";
|
|
gpio-controller;
|
|
#gpio-cells = <1>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
};
|
|
|
|
* Marvell Orion GPIO Controller
|
|
|
|
Required properties:
|
|
- compatible : Should be "marvell,orion-gpio"
|
|
- reg : Address and length of the register set for controller.
|
|
- gpio-controller : So we know this is a gpio controller.
|
|
- ngpio : How many gpios this controller has.
|
|
- interrupts : Up to 4 Interrupts for the controller.
|
|
|
|
Optional properties:
|
|
- mask-offset : For SMP Orions, offset for Nth CPU
|
|
|
|
Example:
|
|
|
|
gpio0: gpio@10100 {
|
|
compatible = "marvell,orion-gpio";
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
reg = <0x10100 0x40>;
|
|
ngpio = <32>;
|
|
interrupts = <35>, <36>, <37>, <38>;
|
|
};
|