forked from Minki/linux
424600f970
Reduce the SHPC hotplug driver's dependence on ACPI. We don't walk the acpi namespace anymore to build a list of bridges and devices. The remaining interaction with ACPI is to run the _OSHP method to transition control of hotplug hardware from system BIOS to the shpc hotplug driver, and to run the _HPP method to get hotplug device parameters like cache line size, latency timer and SERR/PERR enable from BIOS. Note that one of the side effects of this patch is that shpchp does not enable the hot-added device or its DMA bus mastering automatically now. It expects the device driver to do that. This may break some drivers and we will have to fix them as they are reported. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
1307 lines
34 KiB
C
1307 lines
34 KiB
C
/*
|
|
* Standard Hot Plug Controller Driver
|
|
*
|
|
* Copyright (C) 1995,2001 Compaq Computer Corporation
|
|
* Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
|
|
* Copyright (C) 2001 IBM Corp.
|
|
* Copyright (C) 2003-2004 Intel Corporation
|
|
*
|
|
* All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or (at
|
|
* your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
|
|
* NON INFRINGEMENT. See the GNU General Public License for more
|
|
* details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
|
|
*
|
|
*/
|
|
|
|
#include <linux/config.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/smp_lock.h>
|
|
#include <linux/pci.h>
|
|
#include "../pci.h"
|
|
#include "shpchp.h"
|
|
|
|
static void interrupt_event_handler(struct controller *ctrl);
|
|
|
|
static struct semaphore event_semaphore; /* mutex for process loop (up if something to process) */
|
|
static struct semaphore event_exit; /* guard ensure thread has exited before calling it quits */
|
|
static int event_finished;
|
|
static unsigned long pushbutton_pending; /* = 0 */
|
|
|
|
u8 shpchp_handle_attention_button(u8 hp_slot, void *inst_id)
|
|
{
|
|
struct controller *ctrl = (struct controller *) inst_id;
|
|
struct slot *p_slot;
|
|
u8 rc = 0;
|
|
u8 getstatus;
|
|
struct pci_func *func;
|
|
struct event_info *taskInfo;
|
|
|
|
/* Attention Button Change */
|
|
dbg("shpchp: Attention button interrupt received.\n");
|
|
|
|
func = shpchp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0);
|
|
|
|
/* This is the structure that tells the worker thread what to do */
|
|
taskInfo = &(ctrl->event_queue[ctrl->next_event]);
|
|
p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
|
|
|
|
p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save));
|
|
p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
|
|
|
|
ctrl->next_event = (ctrl->next_event + 1) % 10;
|
|
taskInfo->hp_slot = hp_slot;
|
|
|
|
rc++;
|
|
|
|
/*
|
|
* Button pressed - See if need to TAKE ACTION!!!
|
|
*/
|
|
info("Button pressed on Slot(%d)\n", ctrl->first_slot + hp_slot);
|
|
taskInfo->event_type = INT_BUTTON_PRESS;
|
|
|
|
if ((p_slot->state == BLINKINGON_STATE)
|
|
|| (p_slot->state == BLINKINGOFF_STATE)) {
|
|
/* Cancel if we are still blinking; this means that we press the
|
|
* attention again before the 5 sec. limit expires to cancel hot-add
|
|
* or hot-remove
|
|
*/
|
|
taskInfo->event_type = INT_BUTTON_CANCEL;
|
|
info("Button cancel on Slot(%d)\n", ctrl->first_slot + hp_slot);
|
|
} else if ((p_slot->state == POWERON_STATE)
|
|
|| (p_slot->state == POWEROFF_STATE)) {
|
|
/* Ignore if the slot is on power-on or power-off state; this
|
|
* means that the previous attention button action to hot-add or
|
|
* hot-remove is undergoing
|
|
*/
|
|
taskInfo->event_type = INT_BUTTON_IGNORE;
|
|
info("Button ignore on Slot(%d)\n", ctrl->first_slot + hp_slot);
|
|
}
|
|
|
|
if (rc)
|
|
up(&event_semaphore); /* signal event thread that new event is posted */
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
u8 shpchp_handle_switch_change(u8 hp_slot, void *inst_id)
|
|
{
|
|
struct controller *ctrl = (struct controller *) inst_id;
|
|
struct slot *p_slot;
|
|
u8 rc = 0;
|
|
u8 getstatus;
|
|
struct pci_func *func;
|
|
struct event_info *taskInfo;
|
|
|
|
/* Switch Change */
|
|
dbg("shpchp: Switch interrupt received.\n");
|
|
|
|
func = shpchp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0);
|
|
|
|
/* This is the structure that tells the worker thread
|
|
* what to do
|
|
*/
|
|
taskInfo = &(ctrl->event_queue[ctrl->next_event]);
|
|
ctrl->next_event = (ctrl->next_event + 1) % 10;
|
|
taskInfo->hp_slot = hp_slot;
|
|
|
|
rc++;
|
|
p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
|
|
p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save));
|
|
p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
|
|
dbg("%s: Card present %x Power status %x\n", __FUNCTION__,
|
|
func->presence_save, func->pwr_save);
|
|
|
|
if (getstatus) {
|
|
/*
|
|
* Switch opened
|
|
*/
|
|
info("Latch open on Slot(%d)\n", ctrl->first_slot + hp_slot);
|
|
func->switch_save = 0;
|
|
taskInfo->event_type = INT_SWITCH_OPEN;
|
|
if (func->pwr_save && func->presence_save) {
|
|
taskInfo->event_type = INT_POWER_FAULT;
|
|
err("Surprise Removal of card\n");
|
|
}
|
|
} else {
|
|
/*
|
|
* Switch closed
|
|
*/
|
|
info("Latch close on Slot(%d)\n", ctrl->first_slot + hp_slot);
|
|
func->switch_save = 0x10;
|
|
taskInfo->event_type = INT_SWITCH_CLOSE;
|
|
}
|
|
|
|
if (rc)
|
|
up(&event_semaphore); /* signal event thread that new event is posted */
|
|
|
|
return rc;
|
|
}
|
|
|
|
u8 shpchp_handle_presence_change(u8 hp_slot, void *inst_id)
|
|
{
|
|
struct controller *ctrl = (struct controller *) inst_id;
|
|
struct slot *p_slot;
|
|
u8 rc = 0;
|
|
/*u8 temp_byte;*/
|
|
struct pci_func *func;
|
|
struct event_info *taskInfo;
|
|
|
|
/* Presence Change */
|
|
dbg("shpchp: Presence/Notify input change.\n");
|
|
|
|
func = shpchp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0);
|
|
|
|
/* This is the structure that tells the worker thread
|
|
* what to do
|
|
*/
|
|
taskInfo = &(ctrl->event_queue[ctrl->next_event]);
|
|
ctrl->next_event = (ctrl->next_event + 1) % 10;
|
|
taskInfo->hp_slot = hp_slot;
|
|
|
|
rc++;
|
|
p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
|
|
|
|
/*
|
|
* Save the presence state
|
|
*/
|
|
p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save));
|
|
if (func->presence_save) {
|
|
/*
|
|
* Card Present
|
|
*/
|
|
info("Card present on Slot(%d)\n", ctrl->first_slot + hp_slot);
|
|
taskInfo->event_type = INT_PRESENCE_ON;
|
|
} else {
|
|
/*
|
|
* Not Present
|
|
*/
|
|
info("Card not present on Slot(%d)\n", ctrl->first_slot + hp_slot);
|
|
taskInfo->event_type = INT_PRESENCE_OFF;
|
|
}
|
|
|
|
if (rc)
|
|
up(&event_semaphore); /* signal event thread that new event is posted */
|
|
|
|
return rc;
|
|
}
|
|
|
|
u8 shpchp_handle_power_fault(u8 hp_slot, void *inst_id)
|
|
{
|
|
struct controller *ctrl = (struct controller *) inst_id;
|
|
struct slot *p_slot;
|
|
u8 rc = 0;
|
|
struct pci_func *func;
|
|
struct event_info *taskInfo;
|
|
|
|
/* Power fault */
|
|
dbg("shpchp: Power fault interrupt received.\n");
|
|
|
|
func = shpchp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0);
|
|
|
|
/* This is the structure that tells the worker thread
|
|
* what to do
|
|
*/
|
|
taskInfo = &(ctrl->event_queue[ctrl->next_event]);
|
|
ctrl->next_event = (ctrl->next_event + 1) % 10;
|
|
taskInfo->hp_slot = hp_slot;
|
|
|
|
rc++;
|
|
p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
|
|
|
|
if ( !(p_slot->hpc_ops->query_power_fault(p_slot))) {
|
|
/*
|
|
* Power fault Cleared
|
|
*/
|
|
info("Power fault cleared on Slot(%d)\n", ctrl->first_slot + hp_slot);
|
|
func->status = 0x00;
|
|
taskInfo->event_type = INT_POWER_FAULT_CLEAR;
|
|
} else {
|
|
/*
|
|
* Power fault
|
|
*/
|
|
info("Power fault on Slot(%d)\n", ctrl->first_slot + hp_slot);
|
|
taskInfo->event_type = INT_POWER_FAULT;
|
|
/* set power fault status for this board */
|
|
func->status = 0xFF;
|
|
info("power fault bit %x set\n", hp_slot);
|
|
}
|
|
if (rc)
|
|
up(&event_semaphore); /* signal event thread that new event is posted */
|
|
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* shpchp_slot_create - Creates a node and adds it to the proper bus.
|
|
* @busnumber - bus where new node is to be located
|
|
*
|
|
* Returns pointer to the new node or NULL if unsuccessful
|
|
*/
|
|
struct pci_func *shpchp_slot_create(u8 busnumber)
|
|
{
|
|
struct pci_func *new_slot;
|
|
struct pci_func *next;
|
|
|
|
new_slot = kmalloc(sizeof(*new_slot), GFP_KERNEL);
|
|
|
|
if (new_slot == NULL) {
|
|
return(new_slot);
|
|
}
|
|
|
|
memset(new_slot, 0, sizeof(struct pci_func));
|
|
|
|
new_slot->next = NULL;
|
|
new_slot->configured = 1;
|
|
|
|
if (shpchp_slot_list[busnumber] == NULL) {
|
|
shpchp_slot_list[busnumber] = new_slot;
|
|
} else {
|
|
next = shpchp_slot_list[busnumber];
|
|
while (next->next != NULL)
|
|
next = next->next;
|
|
next->next = new_slot;
|
|
}
|
|
return(new_slot);
|
|
}
|
|
|
|
|
|
/*
|
|
* slot_remove - Removes a node from the linked list of slots.
|
|
* @old_slot: slot to remove
|
|
*
|
|
* Returns 0 if successful, !0 otherwise.
|
|
*/
|
|
static int slot_remove(struct pci_func * old_slot)
|
|
{
|
|
struct pci_func *next;
|
|
|
|
if (old_slot == NULL)
|
|
return(1);
|
|
|
|
next = shpchp_slot_list[old_slot->bus];
|
|
|
|
if (next == NULL) {
|
|
return(1);
|
|
}
|
|
|
|
if (next == old_slot) {
|
|
shpchp_slot_list[old_slot->bus] = old_slot->next;
|
|
kfree(old_slot);
|
|
return(0);
|
|
}
|
|
|
|
while ((next->next != old_slot) && (next->next != NULL)) {
|
|
next = next->next;
|
|
}
|
|
|
|
if (next->next == old_slot) {
|
|
next->next = old_slot->next;
|
|
kfree(old_slot);
|
|
return(0);
|
|
} else
|
|
return(2);
|
|
}
|
|
|
|
|
|
/**
|
|
* bridge_slot_remove - Removes a node from the linked list of slots.
|
|
* @bridge: bridge to remove
|
|
*
|
|
* Returns 0 if successful, !0 otherwise.
|
|
*/
|
|
static int bridge_slot_remove(struct pci_func *bridge)
|
|
{
|
|
u8 subordinateBus, secondaryBus;
|
|
u8 tempBus;
|
|
struct pci_func *next;
|
|
|
|
if (bridge == NULL)
|
|
return(1);
|
|
|
|
secondaryBus = (bridge->config_space[0x06] >> 8) & 0xFF;
|
|
subordinateBus = (bridge->config_space[0x06] >> 16) & 0xFF;
|
|
|
|
for (tempBus = secondaryBus; tempBus <= subordinateBus; tempBus++) {
|
|
next = shpchp_slot_list[tempBus];
|
|
|
|
while (!slot_remove(next)) {
|
|
next = shpchp_slot_list[tempBus];
|
|
}
|
|
}
|
|
|
|
next = shpchp_slot_list[bridge->bus];
|
|
|
|
if (next == NULL) {
|
|
return(1);
|
|
}
|
|
|
|
if (next == bridge) {
|
|
shpchp_slot_list[bridge->bus] = bridge->next;
|
|
kfree(bridge);
|
|
return(0);
|
|
}
|
|
|
|
while ((next->next != bridge) && (next->next != NULL)) {
|
|
next = next->next;
|
|
}
|
|
|
|
if (next->next == bridge) {
|
|
next->next = bridge->next;
|
|
kfree(bridge);
|
|
return(0);
|
|
} else
|
|
return(2);
|
|
}
|
|
|
|
|
|
/**
|
|
* shpchp_slot_find - Looks for a node by bus, and device, multiple functions accessed
|
|
* @bus: bus to find
|
|
* @device: device to find
|
|
* @index: is 0 for first function found, 1 for the second...
|
|
*
|
|
* Returns pointer to the node if successful, %NULL otherwise.
|
|
*/
|
|
struct pci_func *shpchp_slot_find(u8 bus, u8 device, u8 index)
|
|
{
|
|
int found = -1;
|
|
struct pci_func *func;
|
|
|
|
func = shpchp_slot_list[bus];
|
|
|
|
if ((func == NULL) || ((func->device == device) && (index == 0)))
|
|
return(func);
|
|
|
|
if (func->device == device)
|
|
found++;
|
|
|
|
while (func->next != NULL) {
|
|
func = func->next;
|
|
|
|
if (func->device == device)
|
|
found++;
|
|
|
|
if (found == index)
|
|
return(func);
|
|
}
|
|
|
|
return(NULL);
|
|
}
|
|
|
|
static int is_bridge(struct pci_func * func)
|
|
{
|
|
/* Check the header type */
|
|
if (((func->config_space[0x03] >> 16) & 0xFF) == 0x01)
|
|
return 1;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* The following routines constitute the bulk of the
|
|
hotplug controller logic
|
|
*/
|
|
static u32 change_bus_speed(struct controller *ctrl, struct slot *p_slot, enum pci_bus_speed speed)
|
|
{
|
|
u32 rc = 0;
|
|
|
|
dbg("%s: change to speed %d\n", __FUNCTION__, speed);
|
|
down(&ctrl->crit_sect);
|
|
if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, speed))) {
|
|
err("%s: Issue of set bus speed mode command failed\n", __FUNCTION__);
|
|
up(&ctrl->crit_sect);
|
|
return WRONG_BUS_FREQUENCY;
|
|
}
|
|
wait_for_ctrl_irq (ctrl);
|
|
|
|
if ((rc = p_slot->hpc_ops->check_cmd_status(ctrl))) {
|
|
err("%s: Can't set bus speed/mode in the case of adapter & bus mismatch\n",
|
|
__FUNCTION__);
|
|
err("%s: Error code (%d)\n", __FUNCTION__, rc);
|
|
up(&ctrl->crit_sect);
|
|
return WRONG_BUS_FREQUENCY;
|
|
}
|
|
up(&ctrl->crit_sect);
|
|
return rc;
|
|
}
|
|
|
|
static u32 fix_bus_speed(struct controller *ctrl, struct slot *pslot, u8 flag,
|
|
enum pci_bus_speed asp, enum pci_bus_speed bsp, enum pci_bus_speed msp)
|
|
{
|
|
u32 rc = 0;
|
|
|
|
if (flag != 0) { /* Other slots on the same bus are occupied */
|
|
if ( asp < bsp ) {
|
|
err("%s: speed of bus %x and adapter %x mismatch\n", __FUNCTION__, bsp, asp);
|
|
return WRONG_BUS_FREQUENCY;
|
|
}
|
|
} else {
|
|
/* Other slots on the same bus are empty */
|
|
if (msp == bsp) {
|
|
/* if adapter_speed >= bus_speed, do nothing */
|
|
if (asp < bsp) {
|
|
/*
|
|
* Try to lower bus speed to accommodate the adapter if other slots
|
|
* on the same controller are empty
|
|
*/
|
|
if ((rc = change_bus_speed(ctrl, pslot, asp)))
|
|
return rc;
|
|
}
|
|
} else {
|
|
if (asp < msp) {
|
|
if ((rc = change_bus_speed(ctrl, pslot, asp)))
|
|
return rc;
|
|
} else {
|
|
if ((rc = change_bus_speed(ctrl, pslot, msp)))
|
|
return rc;
|
|
}
|
|
}
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* board_added - Called after a board has been added to the system.
|
|
*
|
|
* Turns power on for the board
|
|
* Configures board
|
|
*
|
|
*/
|
|
static u32 board_added(struct pci_func * func, struct controller * ctrl)
|
|
{
|
|
u8 hp_slot;
|
|
u8 slots_not_empty = 0;
|
|
u32 rc = 0;
|
|
struct slot *p_slot;
|
|
enum pci_bus_speed adapter_speed, bus_speed, max_bus_speed;
|
|
u8 pi, mode;
|
|
|
|
p_slot = shpchp_find_slot(ctrl, func->device);
|
|
hp_slot = func->device - ctrl->slot_device_offset;
|
|
|
|
dbg("%s: func->device, slot_offset, hp_slot = %d, %d ,%d\n", __FUNCTION__, func->device, ctrl->slot_device_offset, hp_slot);
|
|
|
|
/* Wait for exclusive access to hardware */
|
|
down(&ctrl->crit_sect);
|
|
|
|
/* Power on slot without connecting to bus */
|
|
rc = p_slot->hpc_ops->power_on_slot(p_slot);
|
|
if (rc) {
|
|
err("%s: Failed to power on slot\n", __FUNCTION__);
|
|
/* Done with exclusive hardware access */
|
|
up(&ctrl->crit_sect);
|
|
return -1;
|
|
}
|
|
|
|
/* Wait for the command to complete */
|
|
wait_for_ctrl_irq (ctrl);
|
|
|
|
rc = p_slot->hpc_ops->check_cmd_status(ctrl);
|
|
if (rc) {
|
|
err("%s: Failed to power on slot, error code(%d)\n", __FUNCTION__, rc);
|
|
/* Done with exclusive hardware access */
|
|
up(&ctrl->crit_sect);
|
|
return -1;
|
|
}
|
|
|
|
|
|
if ((ctrl->pci_dev->vendor == 0x8086) && (ctrl->pci_dev->device == 0x0332)) {
|
|
if (slots_not_empty)
|
|
return WRONG_BUS_FREQUENCY;
|
|
|
|
if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, PCI_SPEED_33MHz))) {
|
|
err("%s: Issue of set bus speed mode command failed\n", __FUNCTION__);
|
|
up(&ctrl->crit_sect);
|
|
return WRONG_BUS_FREQUENCY;
|
|
}
|
|
wait_for_ctrl_irq (ctrl);
|
|
|
|
if ((rc = p_slot->hpc_ops->check_cmd_status(ctrl))) {
|
|
err("%s: Can't set bus speed/mode in the case of adapter & bus mismatch\n",
|
|
__FUNCTION__);
|
|
err("%s: Error code (%d)\n", __FUNCTION__, rc);
|
|
up(&ctrl->crit_sect);
|
|
return WRONG_BUS_FREQUENCY;
|
|
}
|
|
/* turn on board, blink green LED, turn off Amber LED */
|
|
if ((rc = p_slot->hpc_ops->slot_enable(p_slot))) {
|
|
err("%s: Issue of Slot Enable command failed\n", __FUNCTION__);
|
|
up(&ctrl->crit_sect);
|
|
return rc;
|
|
}
|
|
wait_for_ctrl_irq (ctrl);
|
|
|
|
if ((rc = p_slot->hpc_ops->check_cmd_status(ctrl))) {
|
|
err("%s: Failed to enable slot, error code(%d)\n", __FUNCTION__, rc);
|
|
up(&ctrl->crit_sect);
|
|
return rc;
|
|
}
|
|
}
|
|
|
|
rc = p_slot->hpc_ops->get_adapter_speed(p_slot, &adapter_speed);
|
|
/* 0 = PCI 33Mhz, 1 = PCI 66 Mhz, 2 = PCI-X 66 PA, 4 = PCI-X 66 ECC, */
|
|
/* 5 = PCI-X 133 PA, 7 = PCI-X 133 ECC, 0xa = PCI-X 133 Mhz 266, */
|
|
/* 0xd = PCI-X 133 Mhz 533 */
|
|
/* This encoding is different from the one used in cur_bus_speed & */
|
|
/* max_bus_speed */
|
|
|
|
if (rc || adapter_speed == PCI_SPEED_UNKNOWN) {
|
|
err("%s: Can't get adapter speed or bus mode mismatch\n", __FUNCTION__);
|
|
/* Done with exclusive hardware access */
|
|
up(&ctrl->crit_sect);
|
|
return WRONG_BUS_FREQUENCY;
|
|
}
|
|
|
|
rc = p_slot->hpc_ops->get_cur_bus_speed(p_slot, &bus_speed);
|
|
if (rc || bus_speed == PCI_SPEED_UNKNOWN) {
|
|
err("%s: Can't get bus operation speed\n", __FUNCTION__);
|
|
/* Done with exclusive hardware access */
|
|
up(&ctrl->crit_sect);
|
|
return WRONG_BUS_FREQUENCY;
|
|
}
|
|
|
|
rc = p_slot->hpc_ops->get_max_bus_speed(p_slot, &max_bus_speed);
|
|
if (rc || max_bus_speed == PCI_SPEED_UNKNOWN) {
|
|
err("%s: Can't get max bus operation speed\n", __FUNCTION__);
|
|
max_bus_speed = bus_speed;
|
|
}
|
|
|
|
/* Done with exclusive hardware access */
|
|
up(&ctrl->crit_sect);
|
|
|
|
if ((rc = p_slot->hpc_ops->get_prog_int(p_slot, &pi))) {
|
|
err("%s: Can't get controller programming interface, set it to 1\n", __FUNCTION__);
|
|
pi = 1;
|
|
}
|
|
|
|
/* Check if there are other slots or devices on the same bus */
|
|
if (!list_empty(&ctrl->pci_dev->subordinate->devices))
|
|
slots_not_empty = 1;
|
|
|
|
dbg("%s: slots_not_empty %d, pi %d\n", __FUNCTION__,
|
|
slots_not_empty, pi);
|
|
dbg("adapter_speed %d, bus_speed %d, max_bus_speed %d\n",
|
|
adapter_speed, bus_speed, max_bus_speed);
|
|
|
|
if (pi == 2) {
|
|
dbg("%s: In PI = %d\n", __FUNCTION__, pi);
|
|
if ((rc = p_slot->hpc_ops->get_mode1_ECC_cap(p_slot, &mode))) {
|
|
err("%s: Can't get Mode1_ECC, set mode to 0\n", __FUNCTION__);
|
|
mode = 0;
|
|
}
|
|
|
|
switch (adapter_speed) {
|
|
case PCI_SPEED_133MHz_PCIX_533:
|
|
case PCI_SPEED_133MHz_PCIX_266:
|
|
if ((bus_speed != adapter_speed) &&
|
|
((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
|
|
return rc;
|
|
break;
|
|
case PCI_SPEED_133MHz_PCIX_ECC:
|
|
case PCI_SPEED_133MHz_PCIX:
|
|
if (mode) { /* Bus - Mode 1 ECC */
|
|
if ((bus_speed != 0x7) &&
|
|
((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
|
|
return rc;
|
|
} else {
|
|
if ((bus_speed != 0x4) &&
|
|
((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
|
|
return rc;
|
|
}
|
|
break;
|
|
case PCI_SPEED_66MHz_PCIX_ECC:
|
|
case PCI_SPEED_66MHz_PCIX:
|
|
if (mode) { /* Bus - Mode 1 ECC */
|
|
if ((bus_speed != 0x5) &&
|
|
((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
|
|
return rc;
|
|
} else {
|
|
if ((bus_speed != 0x2) &&
|
|
((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
|
|
return rc;
|
|
}
|
|
break;
|
|
case PCI_SPEED_66MHz:
|
|
if ((bus_speed != 0x1) &&
|
|
((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
|
|
return rc;
|
|
break;
|
|
case PCI_SPEED_33MHz:
|
|
if (bus_speed > 0x0) {
|
|
if (slots_not_empty == 0) {
|
|
if ((rc = change_bus_speed(ctrl, p_slot, adapter_speed)))
|
|
return rc;
|
|
} else {
|
|
err("%s: speed of bus %x and adapter %x mismatch\n", __FUNCTION__, bus_speed, adapter_speed);
|
|
return WRONG_BUS_FREQUENCY;
|
|
}
|
|
}
|
|
break;
|
|
default:
|
|
err("%s: speed of bus %x and adapter %x mismatch\n", __FUNCTION__, bus_speed, adapter_speed);
|
|
return WRONG_BUS_FREQUENCY;
|
|
}
|
|
} else {
|
|
/* If adpater_speed == bus_speed, nothing to do here */
|
|
dbg("%s: In PI = %d\n", __FUNCTION__, pi);
|
|
if ((adapter_speed != bus_speed) &&
|
|
((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed))))
|
|
return rc;
|
|
}
|
|
|
|
down(&ctrl->crit_sect);
|
|
/* turn on board, blink green LED, turn off Amber LED */
|
|
if ((rc = p_slot->hpc_ops->slot_enable(p_slot))) {
|
|
err("%s: Issue of Slot Enable command failed\n", __FUNCTION__);
|
|
up(&ctrl->crit_sect);
|
|
return rc;
|
|
}
|
|
wait_for_ctrl_irq (ctrl);
|
|
|
|
if ((rc = p_slot->hpc_ops->check_cmd_status(ctrl))) {
|
|
err("%s: Failed to enable slot, error code(%d)\n", __FUNCTION__, rc);
|
|
up(&ctrl->crit_sect);
|
|
return rc;
|
|
}
|
|
|
|
up(&ctrl->crit_sect);
|
|
|
|
/* Wait for ~1 second */
|
|
dbg("%s: before long_delay\n", __FUNCTION__);
|
|
wait_for_ctrl_irq (ctrl);
|
|
dbg("%s: after long_delay\n", __FUNCTION__);
|
|
|
|
dbg("%s: func status = %x\n", __FUNCTION__, func->status);
|
|
/* Check for a power fault */
|
|
if (func->status == 0xFF) {
|
|
/* power fault occurred, but it was benign */
|
|
dbg("%s: power fault\n", __FUNCTION__);
|
|
rc = POWER_FAILURE;
|
|
func->status = 0;
|
|
goto err_exit;
|
|
}
|
|
|
|
if (shpchp_configure_device(p_slot)) {
|
|
err("Cannot add device at 0x%x:0x%x\n", p_slot->bus,
|
|
p_slot->device);
|
|
goto err_exit;
|
|
}
|
|
|
|
shpchp_save_slot_config(ctrl, func);
|
|
|
|
func->status = 0;
|
|
func->switch_save = 0x10;
|
|
func->is_a_board = 0x01;
|
|
func->pwr_save = 1;
|
|
|
|
/* Wait for exclusive access to hardware */
|
|
down(&ctrl->crit_sect);
|
|
|
|
p_slot->hpc_ops->green_led_on(p_slot);
|
|
|
|
/* Wait for the command to complete */
|
|
wait_for_ctrl_irq (ctrl);
|
|
|
|
/* Done with exclusive hardware access */
|
|
up(&ctrl->crit_sect);
|
|
|
|
return 0;
|
|
|
|
err_exit:
|
|
/* Wait for exclusive access to hardware */
|
|
down(&ctrl->crit_sect);
|
|
|
|
/* turn off slot, turn on Amber LED, turn off Green LED */
|
|
rc = p_slot->hpc_ops->slot_disable(p_slot);
|
|
if (rc) {
|
|
err("%s: Issue of Slot Disable command failed\n", __FUNCTION__);
|
|
/* Done with exclusive hardware access */
|
|
up(&ctrl->crit_sect);
|
|
return rc;
|
|
}
|
|
/* Wait for the command to complete */
|
|
wait_for_ctrl_irq (ctrl);
|
|
|
|
rc = p_slot->hpc_ops->check_cmd_status(ctrl);
|
|
if (rc) {
|
|
err("%s: Failed to disable slot, error code(%d)\n", __FUNCTION__, rc);
|
|
/* Done with exclusive hardware access */
|
|
up(&ctrl->crit_sect);
|
|
return rc;
|
|
}
|
|
|
|
/* Done with exclusive hardware access */
|
|
up(&ctrl->crit_sect);
|
|
|
|
return(rc);
|
|
}
|
|
|
|
|
|
/**
|
|
* remove_board - Turns off slot and LED's
|
|
*
|
|
*/
|
|
static u32 remove_board(struct pci_func *func, struct controller *ctrl)
|
|
{
|
|
u8 device;
|
|
u8 hp_slot;
|
|
u32 rc;
|
|
struct slot *p_slot;
|
|
|
|
if (func == NULL)
|
|
return(1);
|
|
|
|
if (shpchp_unconfigure_device(func))
|
|
return(1);
|
|
|
|
device = func->device;
|
|
|
|
hp_slot = func->device - ctrl->slot_device_offset;
|
|
p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
|
|
|
|
dbg("In %s, hp_slot = %d\n", __FUNCTION__, hp_slot);
|
|
|
|
/* Change status to shutdown */
|
|
if (func->is_a_board)
|
|
func->status = 0x01;
|
|
func->configured = 0;
|
|
|
|
/* Wait for exclusive access to hardware */
|
|
down(&ctrl->crit_sect);
|
|
|
|
/* turn off slot, turn on Amber LED, turn off Green LED */
|
|
rc = p_slot->hpc_ops->slot_disable(p_slot);
|
|
if (rc) {
|
|
err("%s: Issue of Slot Disable command failed\n", __FUNCTION__);
|
|
/* Done with exclusive hardware access */
|
|
up(&ctrl->crit_sect);
|
|
return rc;
|
|
}
|
|
/* Wait for the command to complete */
|
|
wait_for_ctrl_irq (ctrl);
|
|
|
|
rc = p_slot->hpc_ops->check_cmd_status(ctrl);
|
|
if (rc) {
|
|
err("%s: Failed to disable slot, error code(%d)\n", __FUNCTION__, rc);
|
|
/* Done with exclusive hardware access */
|
|
up(&ctrl->crit_sect);
|
|
return rc;
|
|
}
|
|
|
|
rc = p_slot->hpc_ops->set_attention_status(p_slot, 0);
|
|
if (rc) {
|
|
err("%s: Issue of Set Attention command failed\n", __FUNCTION__);
|
|
/* Done with exclusive hardware access */
|
|
up(&ctrl->crit_sect);
|
|
return rc;
|
|
}
|
|
/* Wait for the command to complete */
|
|
wait_for_ctrl_irq (ctrl);
|
|
|
|
/* Done with exclusive hardware access */
|
|
up(&ctrl->crit_sect);
|
|
|
|
if (ctrl->add_support) {
|
|
while (func) {
|
|
if (is_bridge(func)) {
|
|
dbg("PCI Bridge Hot-Remove s:b:d:f(%02x:%02x:%02x:%02x)\n", ctrl->seg, func->bus,
|
|
func->device, func->function);
|
|
bridge_slot_remove(func);
|
|
} else
|
|
dbg("PCI Function Hot-Remove s:b:d:f(%02x:%02x:%02x:%02x)\n", ctrl->seg, func->bus,
|
|
func->device, func->function);
|
|
slot_remove(func);
|
|
|
|
func = shpchp_slot_find(ctrl->slot_bus, device, 0);
|
|
}
|
|
|
|
/* Setup slot structure with entry for empty slot */
|
|
func = shpchp_slot_create(ctrl->slot_bus);
|
|
|
|
if (func == NULL) {
|
|
return(1);
|
|
}
|
|
|
|
func->bus = ctrl->slot_bus;
|
|
func->device = device;
|
|
func->function = 0;
|
|
func->configured = 0;
|
|
func->switch_save = 0x10;
|
|
func->pwr_save = 0;
|
|
func->is_a_board = 0;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void pushbutton_helper_thread (unsigned long data)
|
|
{
|
|
pushbutton_pending = data;
|
|
|
|
up(&event_semaphore);
|
|
}
|
|
|
|
|
|
/**
|
|
* shpchp_pushbutton_thread
|
|
*
|
|
* Scheduled procedure to handle blocking stuff for the pushbuttons
|
|
* Handles all pending events and exits.
|
|
*
|
|
*/
|
|
static void shpchp_pushbutton_thread (unsigned long slot)
|
|
{
|
|
struct slot *p_slot = (struct slot *) slot;
|
|
u8 getstatus;
|
|
|
|
pushbutton_pending = 0;
|
|
|
|
if (!p_slot) {
|
|
dbg("%s: Error! slot NULL\n", __FUNCTION__);
|
|
return;
|
|
}
|
|
|
|
p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
|
|
if (getstatus) {
|
|
p_slot->state = POWEROFF_STATE;
|
|
dbg("In power_down_board, b:d(%x:%x)\n", p_slot->bus, p_slot->device);
|
|
|
|
shpchp_disable_slot(p_slot);
|
|
p_slot->state = STATIC_STATE;
|
|
} else {
|
|
p_slot->state = POWERON_STATE;
|
|
dbg("In add_board, b:d(%x:%x)\n", p_slot->bus, p_slot->device);
|
|
|
|
if (shpchp_enable_slot(p_slot)) {
|
|
/* Wait for exclusive access to hardware */
|
|
down(&p_slot->ctrl->crit_sect);
|
|
|
|
p_slot->hpc_ops->green_led_off(p_slot);
|
|
|
|
/* Wait for the command to complete */
|
|
wait_for_ctrl_irq (p_slot->ctrl);
|
|
|
|
/* Done with exclusive hardware access */
|
|
up(&p_slot->ctrl->crit_sect);
|
|
}
|
|
p_slot->state = STATIC_STATE;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
|
|
/* this is the main worker thread */
|
|
static int event_thread(void* data)
|
|
{
|
|
struct controller *ctrl;
|
|
lock_kernel();
|
|
daemonize("shpchpd_event");
|
|
unlock_kernel();
|
|
|
|
while (1) {
|
|
dbg("!!!!event_thread sleeping\n");
|
|
down_interruptible (&event_semaphore);
|
|
dbg("event_thread woken finished = %d\n", event_finished);
|
|
if (event_finished || signal_pending(current))
|
|
break;
|
|
/* Do stuff here */
|
|
if (pushbutton_pending)
|
|
shpchp_pushbutton_thread(pushbutton_pending);
|
|
else
|
|
for (ctrl = shpchp_ctrl_list; ctrl; ctrl=ctrl->next)
|
|
interrupt_event_handler(ctrl);
|
|
}
|
|
dbg("event_thread signals exit\n");
|
|
up(&event_exit);
|
|
return 0;
|
|
}
|
|
|
|
int shpchp_event_start_thread (void)
|
|
{
|
|
int pid;
|
|
|
|
/* initialize our semaphores */
|
|
init_MUTEX_LOCKED(&event_exit);
|
|
event_finished=0;
|
|
|
|
init_MUTEX_LOCKED(&event_semaphore);
|
|
pid = kernel_thread(event_thread, NULL, 0);
|
|
|
|
if (pid < 0) {
|
|
err ("Can't start up our event thread\n");
|
|
return -1;
|
|
}
|
|
dbg("Our event thread pid = %d\n", pid);
|
|
return 0;
|
|
}
|
|
|
|
|
|
void shpchp_event_stop_thread (void)
|
|
{
|
|
event_finished = 1;
|
|
dbg("event_thread finish command given\n");
|
|
up(&event_semaphore);
|
|
dbg("wait for event_thread to exit\n");
|
|
down(&event_exit);
|
|
}
|
|
|
|
|
|
static int update_slot_info (struct slot *slot)
|
|
{
|
|
struct hotplug_slot_info *info;
|
|
int result;
|
|
|
|
info = kmalloc(sizeof(*info), GFP_KERNEL);
|
|
if (!info)
|
|
return -ENOMEM;
|
|
|
|
slot->hpc_ops->get_power_status(slot, &(info->power_status));
|
|
slot->hpc_ops->get_attention_status(slot, &(info->attention_status));
|
|
slot->hpc_ops->get_latch_status(slot, &(info->latch_status));
|
|
slot->hpc_ops->get_adapter_status(slot, &(info->adapter_status));
|
|
|
|
result = pci_hp_change_slot_info(slot->hotplug_slot, info);
|
|
kfree (info);
|
|
return result;
|
|
}
|
|
|
|
static void interrupt_event_handler(struct controller *ctrl)
|
|
{
|
|
int loop = 0;
|
|
int change = 1;
|
|
struct pci_func *func;
|
|
u8 hp_slot;
|
|
u8 getstatus;
|
|
struct slot *p_slot;
|
|
|
|
dbg("%s:\n", __FUNCTION__);
|
|
while (change) {
|
|
change = 0;
|
|
|
|
for (loop = 0; loop < 10; loop++) {
|
|
if (ctrl->event_queue[loop].event_type != 0) {
|
|
dbg("%s:loop %x event_type %x\n", __FUNCTION__, loop,
|
|
ctrl->event_queue[loop].event_type);
|
|
hp_slot = ctrl->event_queue[loop].hp_slot;
|
|
|
|
func = shpchp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0);
|
|
|
|
p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
|
|
|
|
dbg("%s: hp_slot %d, func %p, p_slot %p\n", __FUNCTION__, hp_slot, func, p_slot);
|
|
|
|
if (ctrl->event_queue[loop].event_type == INT_BUTTON_CANCEL) {
|
|
dbg("%s: button cancel\n", __FUNCTION__);
|
|
del_timer(&p_slot->task_event);
|
|
|
|
switch (p_slot->state) {
|
|
case BLINKINGOFF_STATE:
|
|
/* Wait for exclusive access to hardware */
|
|
down(&ctrl->crit_sect);
|
|
|
|
p_slot->hpc_ops->green_led_on(p_slot);
|
|
/* Wait for the command to complete */
|
|
wait_for_ctrl_irq (ctrl);
|
|
|
|
p_slot->hpc_ops->set_attention_status(p_slot, 0);
|
|
|
|
/* Wait for the command to complete */
|
|
wait_for_ctrl_irq (ctrl);
|
|
|
|
/* Done with exclusive hardware access */
|
|
up(&ctrl->crit_sect);
|
|
break;
|
|
case BLINKINGON_STATE:
|
|
/* Wait for exclusive access to hardware */
|
|
down(&ctrl->crit_sect);
|
|
|
|
p_slot->hpc_ops->green_led_off(p_slot);
|
|
/* Wait for the command to complete */
|
|
wait_for_ctrl_irq (ctrl);
|
|
|
|
p_slot->hpc_ops->set_attention_status(p_slot, 0);
|
|
/* Wait for the command to complete */
|
|
wait_for_ctrl_irq (ctrl);
|
|
|
|
/* Done with exclusive hardware access */
|
|
up(&ctrl->crit_sect);
|
|
|
|
break;
|
|
default:
|
|
warn("Not a valid state\n");
|
|
return;
|
|
}
|
|
info(msg_button_cancel, p_slot->number);
|
|
p_slot->state = STATIC_STATE;
|
|
} else if (ctrl->event_queue[loop].event_type == INT_BUTTON_PRESS) {
|
|
/* Button Pressed (No action on 1st press...) */
|
|
dbg("%s: Button pressed\n", __FUNCTION__);
|
|
|
|
p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
|
|
if (getstatus) {
|
|
/* slot is on */
|
|
dbg("%s: slot is on\n", __FUNCTION__);
|
|
p_slot->state = BLINKINGOFF_STATE;
|
|
info(msg_button_off, p_slot->number);
|
|
} else {
|
|
/* slot is off */
|
|
dbg("%s: slot is off\n", __FUNCTION__);
|
|
p_slot->state = BLINKINGON_STATE;
|
|
info(msg_button_on, p_slot->number);
|
|
}
|
|
|
|
/* Wait for exclusive access to hardware */
|
|
down(&ctrl->crit_sect);
|
|
|
|
/* blink green LED and turn off amber */
|
|
p_slot->hpc_ops->green_led_blink(p_slot);
|
|
/* Wait for the command to complete */
|
|
wait_for_ctrl_irq (ctrl);
|
|
|
|
p_slot->hpc_ops->set_attention_status(p_slot, 0);
|
|
|
|
/* Wait for the command to complete */
|
|
wait_for_ctrl_irq (ctrl);
|
|
|
|
/* Done with exclusive hardware access */
|
|
up(&ctrl->crit_sect);
|
|
|
|
init_timer(&p_slot->task_event);
|
|
p_slot->task_event.expires = jiffies + 5 * HZ; /* 5 second delay */
|
|
p_slot->task_event.function = (void (*)(unsigned long)) pushbutton_helper_thread;
|
|
p_slot->task_event.data = (unsigned long) p_slot;
|
|
|
|
dbg("%s: add_timer p_slot = %p\n", __FUNCTION__,(void *) p_slot);
|
|
add_timer(&p_slot->task_event);
|
|
} else if (ctrl->event_queue[loop].event_type == INT_POWER_FAULT) {
|
|
/***********POWER FAULT********************/
|
|
dbg("%s: power fault\n", __FUNCTION__);
|
|
/* Wait for exclusive access to hardware */
|
|
down(&ctrl->crit_sect);
|
|
|
|
p_slot->hpc_ops->set_attention_status(p_slot, 1);
|
|
/* Wait for the command to complete */
|
|
wait_for_ctrl_irq (ctrl);
|
|
|
|
p_slot->hpc_ops->green_led_off(p_slot);
|
|
/* Wait for the command to complete */
|
|
wait_for_ctrl_irq (ctrl);
|
|
|
|
/* Done with exclusive hardware access */
|
|
up(&ctrl->crit_sect);
|
|
} else {
|
|
/* refresh notification */
|
|
if (p_slot)
|
|
update_slot_info(p_slot);
|
|
}
|
|
|
|
ctrl->event_queue[loop].event_type = 0;
|
|
|
|
change = 1;
|
|
}
|
|
} /* End of FOR loop */
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
|
|
int shpchp_enable_slot (struct slot *p_slot)
|
|
{
|
|
u8 getstatus = 0;
|
|
int rc;
|
|
struct pci_func *func;
|
|
|
|
func = shpchp_slot_find(p_slot->bus, p_slot->device, 0);
|
|
if (!func) {
|
|
dbg("%s: Error! slot NULL\n", __FUNCTION__);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Check to see if (latch closed, card present, power off) */
|
|
down(&p_slot->ctrl->crit_sect);
|
|
rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
|
|
if (rc || !getstatus) {
|
|
info("%s: no adapter on slot(%x)\n", __FUNCTION__, p_slot->number);
|
|
up(&p_slot->ctrl->crit_sect);
|
|
return -ENODEV;
|
|
}
|
|
rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
|
|
if (rc || getstatus) {
|
|
info("%s: latch open on slot(%x)\n", __FUNCTION__, p_slot->number);
|
|
up(&p_slot->ctrl->crit_sect);
|
|
return -ENODEV;
|
|
}
|
|
rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
|
|
if (rc || getstatus) {
|
|
info("%s: already enabled on slot(%x)\n", __FUNCTION__, p_slot->number);
|
|
up(&p_slot->ctrl->crit_sect);
|
|
return -ENODEV;
|
|
}
|
|
up(&p_slot->ctrl->crit_sect);
|
|
|
|
slot_remove(func);
|
|
|
|
func = shpchp_slot_create(p_slot->bus);
|
|
if (func == NULL)
|
|
return -ENOMEM;
|
|
|
|
func->bus = p_slot->bus;
|
|
func->device = p_slot->device;
|
|
func->function = 0;
|
|
func->configured = 0;
|
|
func->is_a_board = 1;
|
|
|
|
/* We have to save the presence info for these slots */
|
|
p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save));
|
|
p_slot->hpc_ops->get_power_status(p_slot, &(func->pwr_save));
|
|
dbg("%s: func->pwr_save %x\n", __FUNCTION__, func->pwr_save);
|
|
p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
|
|
func->switch_save = !getstatus? 0x10:0;
|
|
|
|
rc = board_added(func, p_slot->ctrl);
|
|
if (rc) {
|
|
if (is_bridge(func))
|
|
bridge_slot_remove(func);
|
|
else
|
|
slot_remove(func);
|
|
|
|
/* Setup slot structure with entry for empty slot */
|
|
func = shpchp_slot_create(p_slot->bus);
|
|
if (func == NULL)
|
|
return -ENOMEM; /* Out of memory */
|
|
|
|
func->bus = p_slot->bus;
|
|
func->device = p_slot->device;
|
|
func->function = 0;
|
|
func->configured = 0;
|
|
func->is_a_board = 1;
|
|
|
|
/* We have to save the presence info for these slots */
|
|
p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save));
|
|
p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
|
|
func->switch_save = !getstatus? 0x10:0;
|
|
}
|
|
|
|
if (p_slot)
|
|
update_slot_info(p_slot);
|
|
|
|
return rc;
|
|
}
|
|
|
|
|
|
int shpchp_disable_slot (struct slot *p_slot)
|
|
{
|
|
u8 class_code, header_type, BCR;
|
|
u8 index = 0;
|
|
u8 getstatus = 0;
|
|
u32 rc = 0;
|
|
int ret = 0;
|
|
unsigned int devfn;
|
|
struct pci_bus *pci_bus;
|
|
struct pci_func *func;
|
|
|
|
if (!p_slot->ctrl)
|
|
return -ENODEV;
|
|
|
|
pci_bus = p_slot->ctrl->pci_dev->subordinate;
|
|
|
|
/* Check to see if (latch closed, card present, power on) */
|
|
down(&p_slot->ctrl->crit_sect);
|
|
|
|
ret = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
|
|
if (ret || !getstatus) {
|
|
info("%s: no adapter on slot(%x)\n", __FUNCTION__, p_slot->number);
|
|
up(&p_slot->ctrl->crit_sect);
|
|
return -ENODEV;
|
|
}
|
|
ret = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
|
|
if (ret || getstatus) {
|
|
info("%s: latch open on slot(%x)\n", __FUNCTION__, p_slot->number);
|
|
up(&p_slot->ctrl->crit_sect);
|
|
return -ENODEV;
|
|
}
|
|
ret = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
|
|
if (ret || !getstatus) {
|
|
info("%s: already disabled slot(%x)\n", __FUNCTION__, p_slot->number);
|
|
up(&p_slot->ctrl->crit_sect);
|
|
return -ENODEV;
|
|
}
|
|
up(&p_slot->ctrl->crit_sect);
|
|
|
|
func = shpchp_slot_find(p_slot->bus, p_slot->device, index++);
|
|
|
|
/* Make sure there are no video controllers here
|
|
* for all func of p_slot
|
|
*/
|
|
while (func && !rc) {
|
|
pci_bus->number = func->bus;
|
|
devfn = PCI_DEVFN(func->device, func->function);
|
|
|
|
/* Check the Class Code */
|
|
rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code);
|
|
if (rc)
|
|
return -ENODEV;
|
|
|
|
if (class_code == PCI_BASE_CLASS_DISPLAY) {
|
|
/* Display/Video adapter (not supported) */
|
|
rc = REMOVE_NOT_SUPPORTED;
|
|
} else {
|
|
/* See if it's a bridge */
|
|
rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
|
|
if (rc)
|
|
return -ENODEV;
|
|
|
|
/* If it's a bridge, check the VGA Enable bit */
|
|
if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
|
|
rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_BRIDGE_CONTROL, &BCR);
|
|
if (rc)
|
|
return -ENODEV;
|
|
|
|
/* If the VGA Enable bit is set, remove isn't supported */
|
|
if (BCR & PCI_BRIDGE_CTL_VGA) {
|
|
rc = REMOVE_NOT_SUPPORTED;
|
|
}
|
|
}
|
|
}
|
|
|
|
func = shpchp_slot_find(p_slot->bus, p_slot->device, index++);
|
|
}
|
|
|
|
func = shpchp_slot_find(p_slot->bus, p_slot->device, 0);
|
|
if ((func != NULL) && !rc) {
|
|
rc = remove_board(func, p_slot->ctrl);
|
|
} else if (!rc)
|
|
rc = -ENODEV;
|
|
|
|
if (p_slot)
|
|
update_slot_info(p_slot);
|
|
|
|
return rc;
|
|
}
|
|
|