forked from Minki/linux
535f7fffed
Chagall WiFi, with product name Samsung Galaxy Tab S 10.5", is based
on Exynos 5420. This device is one of several tablet models released
in 2014 based on Exynos 5420.
The device tree added here contains support for:
- UART
- eMMC
- SD card
- USB
CCI has been disabled in the hardware, enabling it would require
(de-)soldering a resistor on the board. Trying to boot with it
enabled in kernel makes the device hang when CCI is probed.
Exynos5420-arndale-octa also has had CCI disabled due to issues, see
commit 25217fef35
("ARM: dts: disable CCI on exynos5420 based
arndale-octa").
Signed-off-by: Henrik Grimler <henrik@grimler.se>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20220118185746.299832-4-henrik@grimler.se
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
692 lines
14 KiB
Plaintext
692 lines
14 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Base DT for Samsung's family of tablets based on Exynos5420.
|
|
*
|
|
* Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com
|
|
* Copyright (c) 2022 Henrik Grimler
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "exynos5420.dtsi"
|
|
#include "exynos5420-cpus.dtsi"
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/clock/samsung,s2mps11.h>
|
|
|
|
/ {
|
|
chassis-type = "tablet";
|
|
|
|
/*
|
|
* To successfully boot the mainline kernel with the stock
|
|
* bootloader (SBOOT), the tlb needs to be flushed after the
|
|
* page table pointer has been updated in __common_mmu_cache_on.
|
|
* The same hack is also needed to boot exynos4412-i9300 with
|
|
* stock bootloader, and probably other Samsung devices of
|
|
* similar age. See
|
|
* https://lore.kernel.org/all/1355276466-18295-1-git-send-email-arve@android.com
|
|
* for more details.
|
|
*/
|
|
|
|
chosen {
|
|
stdout-path = "serial2:115200n8";
|
|
};
|
|
|
|
memory@20000000 {
|
|
device_type = "memory";
|
|
reg = <0x20000000 0xc0000000>;
|
|
};
|
|
|
|
firmware@2073000 {
|
|
compatible = "samsung,secure-firmware";
|
|
reg = <0x02073000 0x1000>;
|
|
};
|
|
|
|
fixed-rate-clocks {
|
|
oscclk {
|
|
compatible = "samsung,exynos5420-oscclk";
|
|
clock-frequency = <24000000>;
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-names = "default";
|
|
|
|
key-power {
|
|
debounce-interval = <10>;
|
|
gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
|
|
label = "Power";
|
|
linux,code = <KEY_POWER>;
|
|
wakeup-source;
|
|
};
|
|
|
|
key-home {
|
|
debounce-interval = <10>;
|
|
gpios = <&gpx0 5 GPIO_ACTIVE_LOW>;
|
|
label = "Home";
|
|
linux,code = <KEY_HOME>;
|
|
wakeup-source;
|
|
};
|
|
|
|
key-volume-up {
|
|
debounce-interval = <10>;
|
|
gpios = <&gpx0 2 GPIO_ACTIVE_LOW>;
|
|
label = "Volume Up";
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
};
|
|
|
|
key-volume-down {
|
|
debounce-interval = <10>;
|
|
gpios = <&gpx0 3 GPIO_ACTIVE_LOW>;
|
|
label = "Volume Down";
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&cci {
|
|
/* CCI is disabled in hardware */
|
|
status = "disabled";
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu-supply = <&buck2_reg>;
|
|
};
|
|
|
|
&cpu4 {
|
|
cpu-supply = <&buck6_reg>;
|
|
};
|
|
|
|
&gpu {
|
|
status = "okay";
|
|
mali-supply = <&buck4_reg>;
|
|
};
|
|
|
|
&hsi2c_7 {
|
|
status = "okay";
|
|
|
|
pmic@66 {
|
|
compatible = "samsung,s2mps11-pmic";
|
|
reg = <0x66>;
|
|
|
|
interrupt-parent = <&gpx3>;
|
|
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&s2mps11_irq>;
|
|
|
|
s2mps11_osc: clocks {
|
|
compatible = "samsung,s2mps11-clk";
|
|
#clock-cells = <1>;
|
|
clock-output-names = "s2mps11_ap", "s2mps11_cp",
|
|
"s2mps11_bt";
|
|
};
|
|
|
|
regulators {
|
|
buck1_reg: BUCK1 {
|
|
regulator-name = "VDD_MIF_1V1";
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
buck2_reg: BUCK2 {
|
|
regulator-name = "VDD_ARM_1V0";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
buck3_reg: BUCK3 {
|
|
regulator-name = "VDD_INT_1V0";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
buck4_reg: BUCK4 {
|
|
regulator-name = "VDD_G3D_1V0";
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
buck5_reg: BUCK5 {
|
|
regulator-name = "VDD_MEM_1V2";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
|
|
};
|
|
|
|
buck6_reg: BUCK6 {
|
|
regulator-name = "VDD_KFC_1V0";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
buck7_reg: BUCK7 {
|
|
regulator-name = "VIN_LLDO_1V4";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
buck8_reg: BUCK8 {
|
|
regulator-name = "VIN_MLDO_2V0";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2100000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
buck9_reg: BUCK9 {
|
|
regulator-name = "VIN_HLDO_3V5";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3500000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
buck10_reg: BUCK10 {
|
|
regulator-name = "VDD_CAM_ISP_1V0";
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <3550000>;
|
|
};
|
|
|
|
ldo1_reg: LDO1 {
|
|
regulator-name = "VDD_ALIVE_1.0V";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo2_reg: LDO2 {
|
|
regulator-name = "VDD_APIO_1V8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo3_reg: LDO3 {
|
|
regulator-name = "VDD_APIO_MMC01_1V8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo4_reg: LDO4 {
|
|
regulator-name = "VDD_ADC_1V8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo5_reg: LDO5 {
|
|
/* Unused */
|
|
regulator-name = "VDD_LDO5";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
ldo6_reg: LDO6 {
|
|
regulator-name = "VDD_MIPI_1V0";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo7_reg: LDO7 {
|
|
regulator-name = "VDD_MIPI_PLL_ABB1_18V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo8_reg: LDO8 {
|
|
/* Unused */
|
|
regulator-name = "VDD_LDO8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
ldo9_reg: LDO9 {
|
|
regulator-name = "VDD_UOTG_3V0";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo10_reg: LDO10 {
|
|
regulator-name = "VDDQ_PRE_1V8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo11_reg: LDO11 {
|
|
regulator-name = "VDD_HSIC_1V0";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo12_reg: LDO12 {
|
|
regulator-name = "VDD_HSIC_1V8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo13_reg: LDO13 {
|
|
regulator-name = "VDD_APIO_MMC2_2V8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-boot-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo14_reg: LDO14 {
|
|
regulator-name = "VDD_MOTOR_3V0";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo15_reg: LDO15 {
|
|
regulator-name = "VDD_LDO15";
|
|
/*
|
|
* LDO15 varies between devices and is
|
|
* specified in the device dts
|
|
*/
|
|
};
|
|
|
|
ldo16_reg: LDO16 {
|
|
regulator-name = "VDD_AP_2V8";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo17_reg: LDO17 {
|
|
regulator-name = "VDD_LDO17";
|
|
/*
|
|
* LDO17 varies between devices and is
|
|
* specified in the device dts
|
|
*/
|
|
};
|
|
|
|
ldo18_reg: LDO18 {
|
|
/* Unused */
|
|
regulator-name = "VDD_LDO18";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
ldo19_reg: LDO19 {
|
|
regulator-name = "VDD_VTF_2V8";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo20_reg: LDO20 {
|
|
regulator-name = "VDD_CAM1_CAM_1V8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo21_reg: LDO21 {
|
|
regulator-name = "VDD_CAM_IO_1V8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo22_reg: LDO22 {
|
|
regulator-name = "VDD_CAM0_S_CORE_1V1";
|
|
regulator-min-microvolt = <1050000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo23_reg: LDO23 {
|
|
regulator-name = "VDD_MIFS_1V1";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-always-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo24_reg: LDO24 {
|
|
regulator-name = "VDD_TSP_3V3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo25_reg: LDO25 {
|
|
/* Unused */
|
|
regulator-name = "VDD_LDO25";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <3950000>;
|
|
};
|
|
|
|
ldo26_reg: LDO26 {
|
|
regulator-name = "VDD_CAM0_AF_2V8";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo27_reg: LDO27 {
|
|
regulator-name = "VDD_G3DS_1V0";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo28_reg: LDO28 {
|
|
regulator-name = "VDD_LDO28";
|
|
/*
|
|
* LDO28 varies between devices and is
|
|
* specified in the device dts
|
|
*/
|
|
};
|
|
|
|
ldo29_reg: LDO29 {
|
|
regulator-name = "VDD_LDO29";
|
|
/*
|
|
* LDO29 varies between devices and is
|
|
* specified in the device dts
|
|
*/
|
|
};
|
|
|
|
ldo30_reg: LDO30 {
|
|
regulator-name = "VDD_TOUCH_1V8";
|
|
regulator-min-microvolt = <1900000>;
|
|
regulator-max-microvolt = <1900000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo31_reg: LDO31 {
|
|
regulator-name = "VDD_LDO31";
|
|
/*
|
|
* LDO31 varies between devices and is
|
|
* specified in the device dts
|
|
*/
|
|
};
|
|
|
|
ldo32_reg: LDO32 {
|
|
regulator-name = "VDD_LDO32";
|
|
/*
|
|
* LDO32 varies between devices and is
|
|
* specified in the device dts
|
|
*/
|
|
};
|
|
|
|
ldo33_reg: LDO33 {
|
|
regulator-name = "VDD_MHL_1V8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo34_reg: LDO34 {
|
|
regulator-name = "VDD_MHL_3V3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo35_reg: LDO35 {
|
|
regulator-name = "VDD_SIL_1V2";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
ldo36_reg: LDO36 {
|
|
/* Unused */
|
|
regulator-name = "VDD_LDO36";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <3950000>;
|
|
};
|
|
|
|
ldo37_reg: LDO37 {
|
|
/* Unused */
|
|
regulator-name = "VDD_LDO37";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <3950000>;
|
|
};
|
|
|
|
ldo38_reg: LDO38 {
|
|
regulator-name = "VDD_KEY_LED_3V3";
|
|
regulator-min-microvolt = <2500000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&mixer {
|
|
status = "okay";
|
|
};
|
|
|
|
/* Internal storage */
|
|
&mmc_0 {
|
|
status = "okay";
|
|
bus-width = <8>;
|
|
cap-mmc-highspeed;
|
|
card-detect-delay = <200>;
|
|
mmc-hs200-1_8v;
|
|
non-removable;
|
|
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
|
|
pinctrl-names = "default";
|
|
samsung,dw-mshc-ciu-div = <3>;
|
|
samsung,dw-mshc-ddr-timing = <0 2>;
|
|
samsung,dw-mshc-sdr-timing = <0 4>;
|
|
vqmmc-supply = <&ldo3_reg>;
|
|
};
|
|
|
|
/* External sdcard */
|
|
&mmc_2 {
|
|
status = "okay";
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
card-detect-delay = <200>;
|
|
cd-gpios = <&gpx2 4 GPIO_ACTIVE_LOW>;
|
|
pinctrl-0 = <&sd2_clk &sd2_cmd &mmc2_cd &sd2_bus1 &sd2_bus4>;
|
|
pinctrl-names = "default";
|
|
samsung,dw-mshc-ciu-div = <3>;
|
|
samsung,dw-mshc-ddr-timing = <0 2>;
|
|
samsung,dw-mshc-sdr-timing = <0 4>;
|
|
sd-uhs-sdr50;
|
|
vmmc-supply = <&ldo19_reg>;
|
|
vqmmc-supply = <&ldo13_reg>;
|
|
};
|
|
|
|
&pinctrl_0 {
|
|
mmc2_cd: mmc2-cd-pins {
|
|
samsung,pins = "gpx2-4";
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
|
|
};
|
|
|
|
s2mps11_irq: s2mps11-irq-pins {
|
|
samsung,pins = "gpx3-0";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
|
|
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
|
|
};
|
|
};
|
|
|
|
&rtc {
|
|
status = "okay";
|
|
clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
|
|
clock-names = "rtc", "rtc_src";
|
|
};
|
|
|
|
&tmu_cpu0 {
|
|
vtmu-supply = <&ldo10_reg>;
|
|
};
|
|
|
|
&tmu_cpu1 {
|
|
vtmu-supply = <&ldo10_reg>;
|
|
};
|
|
|
|
&tmu_cpu2 {
|
|
vtmu-supply = <&ldo10_reg>;
|
|
};
|
|
|
|
&tmu_cpu3 {
|
|
vtmu-supply = <&ldo10_reg>;
|
|
};
|
|
|
|
&tmu_gpu {
|
|
vtmu-supply = <&ldo10_reg>;
|
|
};
|
|
|
|
&usbdrd_dwc3_0 {
|
|
dr_mode = "peripheral";
|
|
};
|
|
|
|
&usbdrd_dwc3_1 {
|
|
dr_mode = "peripheral";
|
|
};
|
|
|
|
&usbdrd3_0 {
|
|
vdd33-supply = <&ldo9_reg>;
|
|
vdd10-supply = <&ldo11_reg>;
|
|
};
|
|
|
|
&usbdrd3_1 {
|
|
vdd33-supply = <&ldo9_reg>;
|
|
vdd10-supply = <&ldo11_reg>;
|
|
};
|