forked from Minki/linux
09cec02321
Add definitions for PCIe legacy INTx interrupts. This is required for example in a scenario where a driver requests only one of the legacy interrupts (INTA). Without this, the driver would be notified on events on all 4 (INTA, INTB, INTC, INTD), even if it requested only one of them. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
440 lines
9.8 KiB
Plaintext
440 lines
9.8 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Device Tree Include file for Marvell Armada 370 family SoC
|
|
*
|
|
* Copyright (C) 2012 Marvell
|
|
*
|
|
* Lior Amsalem <alior@marvell.com>
|
|
* Gregory CLEMENT <gregory.clement@free-electrons.com>
|
|
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
|
|
*
|
|
* Contains definitions specific to the Armada 370 SoC that are not
|
|
* common to all Armada SoCs.
|
|
*/
|
|
|
|
#include "armada-370-xp.dtsi"
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
model = "Marvell Armada 370 family SoC";
|
|
compatible = "marvell,armada370", "marvell,armada-370-xp";
|
|
|
|
aliases {
|
|
gpio0 = &gpio0;
|
|
gpio1 = &gpio1;
|
|
gpio2 = &gpio2;
|
|
};
|
|
|
|
soc {
|
|
compatible = "marvell,armada370-mbus", "simple-bus";
|
|
|
|
bootrom {
|
|
compatible = "marvell,bootrom";
|
|
reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>;
|
|
};
|
|
|
|
pciec: pcie@82000000 {
|
|
compatible = "marvell,armada-370-pcie";
|
|
status = "disabled";
|
|
device_type = "pci";
|
|
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
|
|
msi-parent = <&mpic>;
|
|
bus-range = <0x00 0xff>;
|
|
|
|
ranges =
|
|
<0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
|
|
0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
|
|
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
|
|
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
|
|
0x82000000 0x2 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
|
|
0x81000000 0x2 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */>;
|
|
|
|
pcie0: pcie@1,0 {
|
|
device_type = "pci";
|
|
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
|
|
reg = <0x0800 0 0 0 0>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
interrupt-names = "intx";
|
|
interrupts-extended = <&mpic 58>;
|
|
#interrupt-cells = <1>;
|
|
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
|
|
0x81000000 0 0 0x81000000 0x1 0 1 0>;
|
|
bus-range = <0x00 0xff>;
|
|
interrupt-map-mask = <0 0 0 7>;
|
|
interrupt-map = <0 0 0 1 &pcie0_intc 0>,
|
|
<0 0 0 2 &pcie0_intc 1>,
|
|
<0 0 0 3 &pcie0_intc 2>,
|
|
<0 0 0 4 &pcie0_intc 3>;
|
|
marvell,pcie-port = <0>;
|
|
marvell,pcie-lane = <0>;
|
|
clocks = <&gateclk 5>;
|
|
status = "disabled";
|
|
|
|
pcie0_intc: interrupt-controller {
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
};
|
|
};
|
|
|
|
pcie2: pcie@2,0 {
|
|
device_type = "pci";
|
|
assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
|
|
reg = <0x1000 0 0 0 0>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
interrupt-names = "intx";
|
|
interrupts-extended = <&mpic 62>;
|
|
#interrupt-cells = <1>;
|
|
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
|
|
0x81000000 0 0 0x81000000 0x2 0 1 0>;
|
|
bus-range = <0x00 0xff>;
|
|
interrupt-map-mask = <0 0 0 7>;
|
|
interrupt-map = <0 0 0 1 &pcie2_intc 0>,
|
|
<0 0 0 2 &pcie2_intc 1>,
|
|
<0 0 0 3 &pcie2_intc 2>,
|
|
<0 0 0 4 &pcie2_intc 3>;
|
|
marvell,pcie-port = <1>;
|
|
marvell,pcie-lane = <0>;
|
|
clocks = <&gateclk 9>;
|
|
status = "disabled";
|
|
|
|
pcie2_intc: interrupt-controller {
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
internal-regs {
|
|
L2: l2-cache@8000 {
|
|
compatible = "marvell,aurora-outer-cache";
|
|
reg = <0x08000 0x1000>;
|
|
cache-id-part = <0x100>;
|
|
cache-level = <2>;
|
|
cache-unified;
|
|
wt-override;
|
|
};
|
|
|
|
gpio0: gpio@18100 {
|
|
compatible = "marvell,armada-370-gpio",
|
|
"marvell,orion-gpio";
|
|
reg = <0x18100 0x40>, <0x181c0 0x08>;
|
|
reg-names = "gpio", "pwm";
|
|
ngpios = <32>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
#pwm-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <82>, <83>, <84>, <85>;
|
|
clocks = <&coreclk 0>;
|
|
};
|
|
|
|
gpio1: gpio@18140 {
|
|
compatible = "marvell,armada-370-gpio",
|
|
"marvell,orion-gpio";
|
|
reg = <0x18140 0x40>, <0x181c8 0x08>;
|
|
reg-names = "gpio", "pwm";
|
|
ngpios = <32>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
#pwm-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <87>, <88>, <89>, <90>;
|
|
clocks = <&coreclk 0>;
|
|
};
|
|
|
|
gpio2: gpio@18180 {
|
|
compatible = "marvell,armada-370-gpio",
|
|
"marvell,orion-gpio";
|
|
reg = <0x18180 0x40>;
|
|
ngpios = <2>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <91>;
|
|
};
|
|
|
|
|
|
systemc: system-controller@18200 {
|
|
compatible = "marvell,armada-370-xp-system-controller";
|
|
reg = <0x18200 0x100>;
|
|
};
|
|
|
|
gateclk: clock-gating-control@18220 {
|
|
compatible = "marvell,armada-370-gating-clock";
|
|
reg = <0x18220 0x4>;
|
|
clocks = <&coreclk 0>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
coreclk: mvebu-sar@18230 {
|
|
compatible = "marvell,armada-370-core-clock";
|
|
reg = <0x18230 0x08>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
thermal: thermal@18300 {
|
|
compatible = "marvell,armada370-thermal";
|
|
reg = <0x18300 0x4
|
|
0x18304 0x4>;
|
|
status = "okay";
|
|
};
|
|
|
|
sscg: sscg@18330 {
|
|
reg = <0x18330 0x4>;
|
|
};
|
|
|
|
cpuconf: cpu-config@21000 {
|
|
compatible = "marvell,armada-370-cpu-config";
|
|
reg = <0x21000 0x8>;
|
|
};
|
|
|
|
audio_controller: audio-controller@30000 {
|
|
#sound-dai-cells = <1>;
|
|
compatible = "marvell,armada370-audio";
|
|
reg = <0x30000 0x4000>;
|
|
interrupts = <93>;
|
|
clocks = <&gateclk 0>;
|
|
clock-names = "internal";
|
|
status = "disabled";
|
|
};
|
|
|
|
xor0: xor@60800 {
|
|
compatible = "marvell,orion-xor";
|
|
reg = <0x60800 0x100
|
|
0x60A00 0x100>;
|
|
status = "okay";
|
|
|
|
xor00 {
|
|
interrupts = <51>;
|
|
dmacap,memcpy;
|
|
dmacap,xor;
|
|
};
|
|
xor01 {
|
|
interrupts = <52>;
|
|
dmacap,memcpy;
|
|
dmacap,xor;
|
|
dmacap,memset;
|
|
};
|
|
};
|
|
|
|
xor1: xor@60900 {
|
|
compatible = "marvell,orion-xor";
|
|
reg = <0x60900 0x100
|
|
0x60b00 0x100>;
|
|
status = "okay";
|
|
|
|
xor10 {
|
|
interrupts = <94>;
|
|
dmacap,memcpy;
|
|
dmacap,xor;
|
|
};
|
|
xor11 {
|
|
interrupts = <95>;
|
|
dmacap,memcpy;
|
|
dmacap,xor;
|
|
dmacap,memset;
|
|
};
|
|
};
|
|
|
|
cesa: crypto@90000 {
|
|
compatible = "marvell,armada-370-crypto";
|
|
reg = <0x90000 0x10000>;
|
|
reg-names = "regs";
|
|
interrupts = <48>;
|
|
clocks = <&gateclk 23>;
|
|
clock-names = "cesa0";
|
|
marvell,crypto-srams = <&crypto_sram>;
|
|
marvell,crypto-sram-size = <0x7e0>;
|
|
};
|
|
};
|
|
|
|
crypto_sram: sa-sram {
|
|
compatible = "mmio-sram";
|
|
reg = <MBUS_ID(0x09, 0x01) 0 0x800>;
|
|
reg-names = "sram";
|
|
clocks = <&gateclk 23>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 MBUS_ID(0x09, 0x01) 0 0x800>;
|
|
|
|
/*
|
|
* The Armada 370 has an erratum preventing the use of
|
|
* the standard workflow for CPU idle support (relying
|
|
* on the BootROM code to enter/exit idle state).
|
|
* Reserve some amount of the crypto SRAM to put the
|
|
* cpuidle workaround.
|
|
*/
|
|
idle-sram@0 {
|
|
reg = <0x0 0x20>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
/*
|
|
* Default UART pinctrl setting without RTS/CTS, can be overwritten on
|
|
* board level if a different configuration is used.
|
|
*/
|
|
|
|
&uart0 {
|
|
pinctrl-0 = <&uart0_pins>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
&uart1 {
|
|
pinctrl-0 = <&uart1_pins>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
&i2c0 {
|
|
reg = <0x11000 0x20>;
|
|
};
|
|
|
|
&i2c1 {
|
|
reg = <0x11100 0x20>;
|
|
};
|
|
|
|
&mpic {
|
|
reg = <0x20a00 0x1d0>, <0x21870 0x58>;
|
|
};
|
|
|
|
&timer {
|
|
compatible = "marvell,armada-370-timer";
|
|
clocks = <&coreclk 2>;
|
|
};
|
|
|
|
&watchdog {
|
|
compatible = "marvell,armada-370-wdt";
|
|
clocks = <&coreclk 2>;
|
|
};
|
|
|
|
&usb0 {
|
|
clocks = <&coreclk 0>;
|
|
};
|
|
|
|
&usb1 {
|
|
clocks = <&coreclk 0>;
|
|
};
|
|
|
|
ð0 {
|
|
compatible = "marvell,armada-370-neta";
|
|
};
|
|
|
|
ð1 {
|
|
compatible = "marvell,armada-370-neta";
|
|
};
|
|
|
|
&pinctrl {
|
|
compatible = "marvell,mv88f6710-pinctrl";
|
|
|
|
spi0_pins1: spi0-pins1 {
|
|
marvell,pins = "mpp33", "mpp34",
|
|
"mpp35", "mpp36";
|
|
marvell,function = "spi0";
|
|
};
|
|
|
|
spi0_pins2: spi0_pins2 {
|
|
marvell,pins = "mpp32", "mpp63",
|
|
"mpp64", "mpp65";
|
|
marvell,function = "spi0";
|
|
};
|
|
|
|
spi1_pins: spi1-pins {
|
|
marvell,pins = "mpp49", "mpp50",
|
|
"mpp51", "mpp52";
|
|
marvell,function = "spi1";
|
|
};
|
|
|
|
uart0_pins: uart0-pins {
|
|
marvell,pins = "mpp0", "mpp1";
|
|
marvell,function = "uart0";
|
|
};
|
|
|
|
uart1_pins: uart1-pins {
|
|
marvell,pins = "mpp41", "mpp42";
|
|
marvell,function = "uart1";
|
|
};
|
|
|
|
sdio_pins1: sdio-pins1 {
|
|
marvell,pins = "mpp9", "mpp11", "mpp12",
|
|
"mpp13", "mpp14", "mpp15";
|
|
marvell,function = "sd0";
|
|
};
|
|
|
|
sdio_pins2: sdio-pins2 {
|
|
marvell,pins = "mpp47", "mpp48", "mpp49",
|
|
"mpp50", "mpp51", "mpp52";
|
|
marvell,function = "sd0";
|
|
};
|
|
|
|
sdio_pins3: sdio-pins3 {
|
|
marvell,pins = "mpp48", "mpp49", "mpp50",
|
|
"mpp51", "mpp52", "mpp53";
|
|
marvell,function = "sd0";
|
|
};
|
|
|
|
i2c0_pins: i2c0-pins {
|
|
marvell,pins = "mpp2", "mpp3";
|
|
marvell,function = "i2c0";
|
|
};
|
|
|
|
i2s_pins1: i2s-pins1 {
|
|
marvell,pins = "mpp5", "mpp6", "mpp7",
|
|
"mpp8", "mpp9", "mpp10",
|
|
"mpp12", "mpp13";
|
|
marvell,function = "audio";
|
|
};
|
|
|
|
i2s_pins2: i2s-pins2 {
|
|
marvell,pins = "mpp49", "mpp47", "mpp50",
|
|
"mpp59", "mpp57", "mpp61",
|
|
"mpp62", "mpp60", "mpp58";
|
|
marvell,function = "audio";
|
|
};
|
|
|
|
mdio_pins: mdio-pins {
|
|
marvell,pins = "mpp17", "mpp18";
|
|
marvell,function = "ge";
|
|
};
|
|
|
|
ge0_rgmii_pins: ge0-rgmii-pins {
|
|
marvell,pins = "mpp5", "mpp6", "mpp7", "mpp8",
|
|
"mpp9", "mpp10", "mpp11", "mpp12",
|
|
"mpp13", "mpp14", "mpp15", "mpp16";
|
|
marvell,function = "ge0";
|
|
};
|
|
|
|
ge1_rgmii_pins: ge1-rgmii-pins {
|
|
marvell,pins = "mpp19", "mpp20", "mpp21", "mpp22",
|
|
"mpp23", "mpp24", "mpp25", "mpp26",
|
|
"mpp27", "mpp28", "mpp29", "mpp30";
|
|
marvell,function = "ge1";
|
|
};
|
|
};
|
|
|
|
/*
|
|
* Default SPI pinctrl setting, can be overwritten on
|
|
* board level if a different configuration is used.
|
|
*/
|
|
&spi0 {
|
|
compatible = "marvell,armada-370-spi", "marvell,orion-spi";
|
|
pinctrl-0 = <&spi0_pins1>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
&spi1 {
|
|
compatible = "marvell,armada-370-spi", "marvell,orion-spi";
|
|
pinctrl-0 = <&spi1_pins>;
|
|
pinctrl-names = "default";
|
|
};
|