forked from Minki/linux
2d3de197a8
Add a 'reg' entry for ICST clock nodes on the Arm Ltd platforms. The 'reg' entry is the VCO register address. With this, the node name can be updated to use a generic node name, 'clock-controller', and a unit-address. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20211024232239.211822-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
609 lines
15 KiB
Plaintext
609 lines
15 KiB
Plaintext
/*
|
|
* Copyright 2014 Linaro Ltd
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
model = "ARM RealView PB1176";
|
|
compatible = "arm,realview-pb1176";
|
|
|
|
chosen { };
|
|
|
|
aliases {
|
|
serial0 = &pb1176_serial0;
|
|
serial1 = &pb1176_serial1;
|
|
serial2 = &pb1176_serial2;
|
|
serial3 = &pb1176_serial3;
|
|
serial4 = &fpga_serial;
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
/* 128 MiB memory @ 0x0 */
|
|
reg = <0x00000000 0x08000000>;
|
|
};
|
|
|
|
/* The voltage to the MMC card is hardwired at 3.3V */
|
|
vmmc: regulator-vmmc {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vmmc";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
veth: regulator-veth {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "veth";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
xtal24mhz: xtal24mhz@24M {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <24000000>;
|
|
};
|
|
|
|
timclk: timclk@1M {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-factor-clock";
|
|
clock-div = <24>;
|
|
clock-mult = <1>;
|
|
clocks = <&xtal24mhz>;
|
|
};
|
|
|
|
mclk: mclk@24M {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-factor-clock";
|
|
clock-div = <1>;
|
|
clock-mult = <1>;
|
|
clocks = <&xtal24mhz>;
|
|
};
|
|
|
|
kmiclk: kmiclk@24M {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-factor-clock";
|
|
clock-div = <1>;
|
|
clock-mult = <1>;
|
|
clocks = <&xtal24mhz>;
|
|
};
|
|
|
|
sspclk: sspclk@24M {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-factor-clock";
|
|
clock-div = <1>;
|
|
clock-mult = <1>;
|
|
clocks = <&xtal24mhz>;
|
|
};
|
|
|
|
uartclk: uartclk@24M {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-factor-clock";
|
|
clock-div = <1>;
|
|
clock-mult = <1>;
|
|
clocks = <&xtal24mhz>;
|
|
};
|
|
|
|
/* FIXME: this actually hangs off the PLL clocks */
|
|
pclk: pclk@0 {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <0>;
|
|
};
|
|
|
|
flash@30000000 {
|
|
compatible = "arm,versatile-flash", "cfi-flash";
|
|
reg = <0x30000000 0x4000000>;
|
|
bank-width = <4>;
|
|
partitions {
|
|
compatible = "arm,arm-firmware-suite";
|
|
};
|
|
};
|
|
|
|
fpga_flash@38000000 {
|
|
compatible = "arm,versatile-flash", "cfi-flash";
|
|
reg = <0x38000000 0x800000>;
|
|
bank-width = <4>;
|
|
partitions {
|
|
compatible = "arm,arm-firmware-suite";
|
|
};
|
|
};
|
|
|
|
/*
|
|
* The "secure flash" contains things like the boot
|
|
* monitor so we don't want people to accidentally
|
|
* screw this up. Mark the device tree node disabled
|
|
* by default.
|
|
*/
|
|
secflash@3c000000 {
|
|
compatible = "arm,versatile-flash", "cfi-flash";
|
|
reg = <0x3c000000 0x4000000>;
|
|
bank-width = <4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
/* SMSC 9118 ethernet with PHY and EEPROM */
|
|
ethernet@3a000000 {
|
|
compatible = "smsc,lan9118", "smsc,lan9115";
|
|
reg = <0x3a000000 0x10000>;
|
|
interrupt-parent = <&intc_fpga1176>;
|
|
interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
|
|
phy-mode = "mii";
|
|
reg-io-width = <4>;
|
|
smsc,irq-active-high;
|
|
smsc,irq-push-pull;
|
|
vdd33a-supply = <&veth>;
|
|
vddvario-supply = <&veth>;
|
|
};
|
|
|
|
usb@3b000000 {
|
|
compatible = "nxp,usb-isp1761";
|
|
reg = <0x3b000000 0x20000>;
|
|
interrupt-parent = <&intc_fpga1176>;
|
|
interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
|
|
dr_mode = "peripheral";
|
|
};
|
|
|
|
bridge {
|
|
compatible = "ti,ths8134a", "ti,ths8134";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
vga_bridge_in: endpoint {
|
|
remote-endpoint = <&clcd_pads>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
vga_bridge_out: endpoint {
|
|
remote-endpoint = <&vga_con_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
vga {
|
|
compatible = "vga-connector";
|
|
|
|
port {
|
|
vga_con_in: endpoint {
|
|
remote-endpoint = <&vga_bridge_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "arm,realview-pb1176-soc", "simple-bus";
|
|
regmap = <&syscon>;
|
|
ranges;
|
|
|
|
syscon: syscon@10000000 {
|
|
compatible = "arm,realview-pb1176-syscon", "syscon", "simple-mfd";
|
|
reg = <0x10000000 0x1000>;
|
|
ranges = <0x0 0x10000000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
led@8,0 {
|
|
compatible = "register-bit-led";
|
|
reg = <0x08 0x04>;
|
|
offset = <0x08>;
|
|
mask = <0x01>;
|
|
label = "versatile:0";
|
|
linux,default-trigger = "heartbeat";
|
|
default-state = "on";
|
|
};
|
|
led@8,1 {
|
|
compatible = "register-bit-led";
|
|
reg = <0x08 0x04>;
|
|
offset = <0x08>;
|
|
mask = <0x02>;
|
|
label = "versatile:1";
|
|
linux,default-trigger = "mmc0";
|
|
default-state = "off";
|
|
};
|
|
led@8,2 {
|
|
compatible = "register-bit-led";
|
|
reg = <0x08 0x04>;
|
|
offset = <0x08>;
|
|
mask = <0x04>;
|
|
label = "versatile:2";
|
|
linux,default-trigger = "cpu0";
|
|
default-state = "off";
|
|
};
|
|
led@8,3 {
|
|
compatible = "register-bit-led";
|
|
reg = <0x08 0x04>;
|
|
offset = <0x08>;
|
|
mask = <0x08>;
|
|
label = "versatile:3";
|
|
default-state = "off";
|
|
};
|
|
led@8,4 {
|
|
compatible = "register-bit-led";
|
|
reg = <0x08 0x04>;
|
|
offset = <0x08>;
|
|
mask = <0x10>;
|
|
label = "versatile:4";
|
|
default-state = "off";
|
|
};
|
|
led@8,5 {
|
|
compatible = "register-bit-led";
|
|
reg = <0x08 0x04>;
|
|
offset = <0x08>;
|
|
mask = <0x20>;
|
|
label = "versatile:5";
|
|
default-state = "off";
|
|
};
|
|
led@8,6 {
|
|
compatible = "register-bit-led";
|
|
reg = <0x08 0x04>;
|
|
offset = <0x08>;
|
|
mask = <0x40>;
|
|
label = "versatile:6";
|
|
default-state = "off";
|
|
};
|
|
led@8,7 {
|
|
compatible = "register-bit-led";
|
|
reg = <0x08 0x04>;
|
|
offset = <0x08>;
|
|
mask = <0x80>;
|
|
label = "versatile:7";
|
|
default-state = "off";
|
|
};
|
|
oscclk0: clock-controller@c {
|
|
compatible = "arm,syscon-icst307";
|
|
reg = <0x0c 0x04>;
|
|
#clock-cells = <0>;
|
|
lock-offset = <0x20>;
|
|
vco-offset = <0x0C>;
|
|
clocks = <&xtal24mhz>;
|
|
};
|
|
oscclk1: clock-controller@10 {
|
|
compatible = "arm,syscon-icst307";
|
|
reg = <0x10 0x04>;
|
|
#clock-cells = <0>;
|
|
lock-offset = <0x20>;
|
|
vco-offset = <0x10>;
|
|
clocks = <&xtal24mhz>;
|
|
};
|
|
oscclk2: clock-controller@14 {
|
|
compatible = "arm,syscon-icst307";
|
|
reg = <0x14 0x04>;
|
|
#clock-cells = <0>;
|
|
lock-offset = <0x20>;
|
|
vco-offset = <0x14>;
|
|
clocks = <&xtal24mhz>;
|
|
};
|
|
oscclk3: clock-controller@18 {
|
|
compatible = "arm,syscon-icst307";
|
|
reg = <0x18 0x04>;
|
|
#clock-cells = <0>;
|
|
lock-offset = <0x20>;
|
|
vco-offset = <0x18>;
|
|
clocks = <&xtal24mhz>;
|
|
};
|
|
oscclk4: clock-controller@1c {
|
|
compatible = "arm,syscon-icst307";
|
|
reg = <0x1c 0x04>;
|
|
#clock-cells = <0>;
|
|
lock-offset = <0x20>;
|
|
vco-offset = <0x1c>;
|
|
clocks = <&xtal24mhz>;
|
|
};
|
|
};
|
|
|
|
/* Primary DevChip GIC synthesized with the CPU */
|
|
intc_dc1176: interrupt-controller@10120000 {
|
|
compatible = "arm,arm1176jzf-devchip-gic", "arm,arm11mp-gic";
|
|
#interrupt-cells = <3>;
|
|
#address-cells = <1>;
|
|
interrupt-controller;
|
|
reg = <0x10121000 0x1000>,
|
|
<0x10120000 0x100>;
|
|
};
|
|
|
|
L2: cache-controller {
|
|
compatible = "arm,l220-cache";
|
|
reg = <0x10110000 0x1000>;
|
|
interrupt-parent = <&intc_dc1176>;
|
|
interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
|
|
cache-unified;
|
|
cache-level = <2>;
|
|
/*
|
|
* Override default cache size, sets and
|
|
* associativity as these may be erroneously set
|
|
* up by boot loader(s).
|
|
*/
|
|
arm,override-auxreg;
|
|
cache-size = <131072>; // 128kB
|
|
cache-sets = <512>;
|
|
cache-line-size = <32>;
|
|
};
|
|
|
|
pmu {
|
|
compatible = "arm,arm1176-pmu";
|
|
interrupt-parent = <&intc_dc1176>;
|
|
interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
timer01: timer@10104000 {
|
|
compatible = "arm,sp804", "arm,primecell";
|
|
reg = <0x10104000 0x1000>;
|
|
interrupt-parent = <&intc_dc1176>;
|
|
interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>, <0 9 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&timclk>, <&timclk>, <&pclk>;
|
|
clock-names = "timer1", "timer2", "apb_pclk";
|
|
};
|
|
|
|
timer23: timer@10105000 {
|
|
compatible = "arm,sp804", "arm,primecell";
|
|
reg = <0x10105000 0x1000>;
|
|
interrupt-parent = <&intc_dc1176>;
|
|
interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
|
|
arm,sp804-has-irq = <1>;
|
|
clocks = <&timclk>, <&timclk>, <&pclk>;
|
|
clock-names = "timer1", "timer2", "apb_pclk";
|
|
};
|
|
|
|
pb1176_rtc: rtc@10108000 {
|
|
compatible = "arm,pl031", "arm,primecell";
|
|
reg = <0x10108000 0x1000>;
|
|
interrupt-parent = <&intc_dc1176>;
|
|
interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&pclk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
pb1176_gpio0: gpio@1010a000 {
|
|
compatible = "arm,pl061", "arm,primecell";
|
|
reg = <0x1010a000 0x1000>;
|
|
gpio-controller;
|
|
interrupt-parent = <&intc_dc1176>;
|
|
interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
clocks = <&pclk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
pb1176_ssp: spi@1010b000 {
|
|
compatible = "arm,pl022", "arm,primecell";
|
|
reg = <0x1010b000 0x1000>;
|
|
interrupt-parent = <&intc_dc1176>;
|
|
interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&sspclk>, <&pclk>;
|
|
clock-names = "SSPCLK", "apb_pclk";
|
|
};
|
|
|
|
pb1176_serial0: serial@1010c000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x1010c000 0x1000>;
|
|
interrupt-parent = <&intc_dc1176>;
|
|
interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&uartclk>, <&pclk>;
|
|
clock-names = "uartclk", "apb_pclk";
|
|
};
|
|
|
|
pb1176_serial1: serial@1010d000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x1010d000 0x1000>;
|
|
interrupt-parent = <&intc_dc1176>;
|
|
interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&uartclk>, <&pclk>;
|
|
clock-names = "uartclk", "apb_pclk";
|
|
};
|
|
|
|
pb1176_serial2: serial@1010e000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x1010e000 0x1000>;
|
|
interrupt-parent = <&intc_dc1176>;
|
|
interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&uartclk>, <&pclk>;
|
|
clock-names = "uartclk", "apb_pclk";
|
|
};
|
|
|
|
pb1176_serial3: serial@1010f000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x1010f000 0x1000>;
|
|
interrupt-parent = <&intc_dc1176>;
|
|
interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&uartclk>, <&pclk>;
|
|
clock-names = "uartclk", "apb_pclk";
|
|
};
|
|
|
|
/* Direct-mapped development chip ROM */
|
|
pb1176_rom@10200000 {
|
|
compatible = "direct-mapped";
|
|
reg = <0x10200000 0x4000>;
|
|
bank-width = <1>;
|
|
};
|
|
|
|
clcd@10112000 {
|
|
compatible = "arm,pl111", "arm,primecell";
|
|
reg = <0x10112000 0x1000>;
|
|
interrupt-parent = <&intc_dc1176>;
|
|
interrupt-names = "combined";
|
|
interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&oscclk0>, <&pclk>;
|
|
clock-names = "clcdclk", "apb_pclk";
|
|
/* 1024x768 16bpp @65MHz works fine */
|
|
max-memory-bandwidth = <95000000>;
|
|
|
|
port {
|
|
clcd_pads: endpoint {
|
|
remote-endpoint = <&vga_bridge_in>;
|
|
arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
/* These peripherals are inside the FPGA rather than the DevChip */
|
|
fpga {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "simple-bus";
|
|
ranges;
|
|
|
|
i2c0: i2c@10002000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "arm,versatile-i2c";
|
|
reg = <0x10002000 0x1000>;
|
|
|
|
rtc@68 {
|
|
compatible = "dallas,ds1338";
|
|
reg = <0x68>;
|
|
};
|
|
};
|
|
|
|
fpga_aaci: aaci@10004000 {
|
|
compatible = "arm,pl041", "arm,primecell";
|
|
reg = <0x10004000 0x1000>;
|
|
interrupt-parent = <&intc_fpga1176>;
|
|
interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&pclk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
fpga_mci: mmcsd@10005000 {
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
reg = <0x10005000 0x1000>;
|
|
interrupt-parent = <&intc_fpga1176>;
|
|
interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 2 IRQ_TYPE_LEVEL_HIGH>;
|
|
/* Due to frequent FIFO overruns, use just 500 kHz */
|
|
max-frequency = <500000>;
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
clocks = <&mclk>, <&pclk>;
|
|
clock-names = "mclk", "apb_pclk";
|
|
vmmc-supply = <&vmmc>;
|
|
cd-gpios = <&fpga_gpio1 0 GPIO_ACTIVE_LOW>;
|
|
wp-gpios = <&fpga_gpio1 1 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
fpga_kmi0: kmi@10006000 {
|
|
compatible = "arm,pl050", "arm,primecell";
|
|
reg = <0x10006000 0x1000>;
|
|
interrupt-parent = <&intc_fpga1176>;
|
|
interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&kmiclk>, <&pclk>;
|
|
clock-names = "KMIREFCLK", "apb_pclk";
|
|
};
|
|
|
|
fpga_kmi1: kmi@10007000 {
|
|
compatible = "arm,pl050", "arm,primecell";
|
|
reg = <0x10007000 0x1000>;
|
|
interrupt-parent = <&intc_fpga1176>;
|
|
interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&kmiclk>, <&pclk>;
|
|
clock-names = "KMIREFCLK", "apb_pclk";
|
|
};
|
|
|
|
fpga_charlcd: charlcd@10008000 {
|
|
compatible = "arm,versatile-lcd";
|
|
reg = <0x10008000 0x1000>;
|
|
interrupt-parent = <&intc_fpga1176>;
|
|
interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&pclk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
fpga_serial: serial@10009000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x10009000 0x1000>;
|
|
interrupt-parent = <&intc_fpga1176>;
|
|
interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&uartclk>, <&pclk>;
|
|
clock-names = "uartclk", "apb_pclk";
|
|
};
|
|
|
|
/* This GIC on the board is cascaded off the DevChip GIC */
|
|
intc_fpga1176: interrupt-controller@10040000 {
|
|
compatible = "arm,arm1176jzf-devchip-gic", "arm,arm11mp-gic";
|
|
#interrupt-cells = <3>;
|
|
#address-cells = <1>;
|
|
interrupt-controller;
|
|
reg = <0x10041000 0x1000>,
|
|
<0x10040000 0x100>;
|
|
interrupt-parent = <&intc_dc1176>;
|
|
interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
fpga_gpio0: gpio@10014000 {
|
|
compatible = "arm,pl061", "arm,primecell";
|
|
reg = <0x10014000 0x1000>;
|
|
gpio-controller;
|
|
interrupt-parent = <&intc_fpga1176>;
|
|
interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
clocks = <&pclk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
fpga_gpio1: gpio@10015000 {
|
|
compatible = "arm,pl061", "arm,primecell";
|
|
reg = <0x10015000 0x1000>;
|
|
gpio-controller;
|
|
interrupt-parent = <&intc_fpga1176>;
|
|
interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
clocks = <&pclk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
fpga_rtc: rtc@10017000 {
|
|
compatible = "arm,pl031", "arm,primecell";
|
|
reg = <0x10017000 0x1000>;
|
|
interrupt-parent = <&intc_fpga1176>;
|
|
interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&pclk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
};
|
|
};
|