leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
40c390c768
linux/arch/arm/mach-spear3xx/spear310.c
Shiraz Hashim 80515a5a2e ARM: SPEAr3xx: shirq: simplify and move the shared irq multiplexor to DT 
SPEAr3xx architecture includes shared/multiplexed irqs for certain set
of devices. The multiplexor provides a single interrupt to parent
interrupt controller (VIC) on behalf of a group of devices.

There can be multiple groups available on SPEAr3xx variants but not
exceeding 4. The number of devices in a group can differ, further they
may share same set of status/mask registers spanning across different
bit masks. Also in some cases the group may not have enable or other
registers. This makes software little complex.

Present implementation was non-DT and had few complex data structures to
decipher banks, number of irqs supported, mask and registers involved.

This patch simplifies the overall design and convert it in to DT.  It
also removes all registration from individual SoC files and bring them
in to common shirq.c.

Also updated the corresponding documentation for DT binding of shirq.

Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2012-11-26 16:55:32 +05:30

264 lines
5.8 KiB
C
Raw Blame History

/*
* arch/arm/mach-spear3xx/spear310.c
*
* SPEAr310 machine source file
*
* Copyright (C) 2009-2012 ST Microelectronics
* Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#define pr_fmt(fmt) "SPEAr310: " fmt
#include <linux/amba/pl08x.h>
#include <linux/amba/serial.h>
#include <linux/of_platform.h>
#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <mach/generic.h>
#include <mach/spear.h>
#define SPEAR310_UART1_BASE UL(0xB2000000)
#define SPEAR310_UART2_BASE UL(0xB2080000)
#define SPEAR310_UART3_BASE UL(0xB2100000)
#define SPEAR310_UART4_BASE UL(0xB2180000)
#define SPEAR310_UART5_BASE UL(0xB2200000)
/* DMAC platform data's slave info */
struct pl08x_channel_data spear310_dma_info[] = {
{
.bus_id = "uart0_rx",
.min_signal = 2,
.max_signal = 2,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart0_tx",
.min_signal = 3,
.max_signal = 3,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ssp0_rx",
.min_signal = 8,
.max_signal = 8,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ssp0_tx",
.min_signal = 9,
.max_signal = 9,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "i2c_rx",
.min_signal = 10,
.max_signal = 10,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "i2c_tx",
.min_signal = 11,
.max_signal = 11,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "irda",
.min_signal = 12,
.max_signal = 12,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "adc",
.min_signal = 13,
.max_signal = 13,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "to_jpeg",
.min_signal = 14,
.max_signal = 14,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "from_jpeg",
.min_signal = 15,
.max_signal = 15,
.muxval = 0,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart1_rx",
.min_signal = 0,
.max_signal = 0,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart1_tx",
.min_signal = 1,
.max_signal = 1,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart2_rx",
.min_signal = 2,
.max_signal = 2,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart2_tx",
.min_signal = 3,
.max_signal = 3,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart3_rx",
.min_signal = 4,
.max_signal = 4,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart3_tx",
.min_signal = 5,
.max_signal = 5,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart4_rx",
.min_signal = 6,
.max_signal = 6,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart4_tx",
.min_signal = 7,
.max_signal = 7,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart5_rx",
.min_signal = 8,
.max_signal = 8,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "uart5_tx",
.min_signal = 9,
.max_signal = 9,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras5_rx",
.min_signal = 10,
.max_signal = 10,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras5_tx",
.min_signal = 11,
.max_signal = 11,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras6_rx",
.min_signal = 12,
.max_signal = 12,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras6_tx",
.min_signal = 13,
.max_signal = 13,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras7_rx",
.min_signal = 14,
.max_signal = 14,
.muxval = 1,
.periph_buses = PL08X_AHB1,
}, {
.bus_id = "ras7_tx",
.min_signal = 15,
.max_signal = 15,
.muxval = 1,
.periph_buses = PL08X_AHB1,
},
};
/* uart devices plat data */
static struct amba_pl011_data spear310_uart_data[] = {
{
.dma_filter = pl08x_filter_id,
.dma_tx_param = "uart1_tx",
.dma_rx_param = "uart1_rx",
}, {
.dma_filter = pl08x_filter_id,
.dma_tx_param = "uart2_tx",
.dma_rx_param = "uart2_rx",
}, {
.dma_filter = pl08x_filter_id,
.dma_tx_param = "uart3_tx",
.dma_rx_param = "uart3_rx",
}, {
.dma_filter = pl08x_filter_id,
.dma_tx_param = "uart4_tx",
.dma_rx_param = "uart4_rx",
}, {
.dma_filter = pl08x_filter_id,
.dma_tx_param = "uart5_tx",
.dma_rx_param = "uart5_rx",
},
};
/* Add SPEAr310 auxdata to pass platform data */
static struct of_dev_auxdata spear310_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
&pl022_plat_data),
OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL,
&pl080_plat_data),
OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART1_BASE, NULL,
&spear310_uart_data[0]),
OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART2_BASE, NULL,
&spear310_uart_data[1]),
OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART3_BASE, NULL,
&spear310_uart_data[2]),
OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART4_BASE, NULL,
&spear310_uart_data[3]),
OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART5_BASE, NULL,
&spear310_uart_data[4]),
{}
};
static void __init spear310_dt_init(void)
{
pl080_plat_data.slave_channels = spear310_dma_info;
pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear310_dma_info);
of_platform_populate(NULL, of_default_bus_match_table,
spear310_auxdata_lookup, NULL);
}
static const char * const spear310_dt_board_compat[] = {
"st,spear310",
"st,spear310-evb",
NULL,
};
static void __init spear310_map_io(void)
{
spear3xx_map_io();
}
DT_MACHINE_START(SPEAR310_DT, "ST SPEAr310 SoC with Flattened Device Tree")
.map_io = spear310_map_io,
.init_irq = spear3xx_dt_init_irq,
.handle_irq = vic_handle_irq,
.timer = &spear3xx_timer,
.init_machine = spear310_dt_init,
.restart = spear_restart,
.dt_compat = spear310_dt_board_compat,
MACHINE_END
Reference in New Issue View Git Blame Copy Permalink