forked from Minki/linux
1408b84729
All PAC7311 specific functions remain in pac7311.c. All PAC7302 specific functions are moved to pac7302.c. The USB device table is also divided into two parts. This makes it possible to remove the sensor specific decisions from different functions and also remove sensor infromation from the USB device table. The common functions are just copied to both subdrivers. These common functions can be separated later to a common file or helper module. Signed-off-by: Marton Nemeth <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
830 lines
21 KiB
C
830 lines
21 KiB
C
/*
|
|
* Pixart PAC7311 library
|
|
* Copyright (C) 2005 Thomas Kaiser thomas@kaiser-linux.li
|
|
*
|
|
* V4L2 by Jean-Francois Moine <http://moinejf.free.fr>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
/* Some documentation about various registers as determined by trial and error.
|
|
When the register addresses differ between the 7202 and the 7311 the 2
|
|
different addresses are written as 7302addr/7311addr, when one of the 2
|
|
addresses is a - sign that register description is not valid for the
|
|
matching IC.
|
|
|
|
Register page 1:
|
|
|
|
Address Description
|
|
-/0x08 Unknown compressor related, must always be 8 except when not
|
|
in 640x480 resolution and page 4 reg 2 <= 3 then set it to 9 !
|
|
-/0x1b Auto white balance related, bit 0 is AWB enable (inverted)
|
|
bits 345 seem to toggle per color gains on/off (inverted)
|
|
0x78 Global control, bit 6 controls the LED (inverted)
|
|
-/0x80 JPEG compression ratio ? Best not touched
|
|
|
|
Register page 3/4:
|
|
|
|
Address Description
|
|
0x02 Clock divider 2-63, fps =~ 60 / val. Must be a multiple of 3 on
|
|
the 7302, so one of 3, 6, 9, ..., except when between 6 and 12?
|
|
-/0x0f Master gain 1-245, low value = high gain
|
|
0x10/- Master gain 0-31
|
|
-/0x10 Another gain 0-15, limited influence (1-2x gain I guess)
|
|
0x21 Bitfield: 0-1 unused, 2-3 vflip/hflip, 4-5 unknown, 6-7 unused
|
|
-/0x27 Seems to toggle various gains on / off, Setting bit 7 seems to
|
|
completely disable the analog amplification block. Set to 0x68
|
|
for max gain, 0x14 for minimal gain.
|
|
*/
|
|
|
|
#define MODULE_NAME "pac7311"
|
|
|
|
#include "gspca.h"
|
|
|
|
MODULE_AUTHOR("Thomas Kaiser thomas@kaiser-linux.li");
|
|
MODULE_DESCRIPTION("Pixart PAC7311");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
/* specific webcam descriptor for pac7311 */
|
|
struct sd {
|
|
struct gspca_dev gspca_dev; /* !! must be the first item */
|
|
|
|
unsigned char contrast;
|
|
unsigned char gain;
|
|
unsigned char exposure;
|
|
unsigned char autogain;
|
|
__u8 hflip;
|
|
__u8 vflip;
|
|
|
|
u8 sof_read;
|
|
u8 autogain_ignore_frames;
|
|
|
|
atomic_t avg_lum;
|
|
};
|
|
|
|
/* V4L2 controls supported by the driver */
|
|
static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val);
|
|
static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val);
|
|
static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val);
|
|
static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val);
|
|
static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val);
|
|
static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val);
|
|
static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val);
|
|
static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val);
|
|
static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val);
|
|
static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val);
|
|
static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val);
|
|
static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val);
|
|
|
|
static struct ctrl sd_ctrls[] = {
|
|
/* This control is for both the 7302 and the 7311 */
|
|
{
|
|
{
|
|
.id = V4L2_CID_CONTRAST,
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
.name = "Contrast",
|
|
.minimum = 0,
|
|
#define CONTRAST_MAX 255
|
|
.maximum = CONTRAST_MAX,
|
|
.step = 1,
|
|
#define CONTRAST_DEF 127
|
|
.default_value = CONTRAST_DEF,
|
|
},
|
|
.set = sd_setcontrast,
|
|
.get = sd_getcontrast,
|
|
},
|
|
/* All controls below are for both the 7302 and the 7311 */
|
|
{
|
|
{
|
|
.id = V4L2_CID_GAIN,
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
.name = "Gain",
|
|
.minimum = 0,
|
|
#define GAIN_MAX 255
|
|
.maximum = GAIN_MAX,
|
|
.step = 1,
|
|
#define GAIN_DEF 127
|
|
#define GAIN_KNEE 255 /* Gain seems to cause little noise on the pac73xx */
|
|
.default_value = GAIN_DEF,
|
|
},
|
|
.set = sd_setgain,
|
|
.get = sd_getgain,
|
|
},
|
|
{
|
|
{
|
|
.id = V4L2_CID_EXPOSURE,
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
.name = "Exposure",
|
|
.minimum = 0,
|
|
#define EXPOSURE_MAX 255
|
|
.maximum = EXPOSURE_MAX,
|
|
.step = 1,
|
|
#define EXPOSURE_DEF 16 /* 32 ms / 30 fps */
|
|
#define EXPOSURE_KNEE 50 /* 100 ms / 10 fps */
|
|
.default_value = EXPOSURE_DEF,
|
|
},
|
|
.set = sd_setexposure,
|
|
.get = sd_getexposure,
|
|
},
|
|
{
|
|
{
|
|
.id = V4L2_CID_AUTOGAIN,
|
|
.type = V4L2_CTRL_TYPE_BOOLEAN,
|
|
.name = "Auto Gain",
|
|
.minimum = 0,
|
|
.maximum = 1,
|
|
.step = 1,
|
|
#define AUTOGAIN_DEF 1
|
|
.default_value = AUTOGAIN_DEF,
|
|
},
|
|
.set = sd_setautogain,
|
|
.get = sd_getautogain,
|
|
},
|
|
{
|
|
{
|
|
.id = V4L2_CID_HFLIP,
|
|
.type = V4L2_CTRL_TYPE_BOOLEAN,
|
|
.name = "Mirror",
|
|
.minimum = 0,
|
|
.maximum = 1,
|
|
.step = 1,
|
|
#define HFLIP_DEF 0
|
|
.default_value = HFLIP_DEF,
|
|
},
|
|
.set = sd_sethflip,
|
|
.get = sd_gethflip,
|
|
},
|
|
{
|
|
{
|
|
.id = V4L2_CID_VFLIP,
|
|
.type = V4L2_CTRL_TYPE_BOOLEAN,
|
|
.name = "Vflip",
|
|
.minimum = 0,
|
|
.maximum = 1,
|
|
.step = 1,
|
|
#define VFLIP_DEF 0
|
|
.default_value = VFLIP_DEF,
|
|
},
|
|
.set = sd_setvflip,
|
|
.get = sd_getvflip,
|
|
},
|
|
};
|
|
|
|
static const struct v4l2_pix_format vga_mode[] = {
|
|
{160, 120, V4L2_PIX_FMT_PJPG, V4L2_FIELD_NONE,
|
|
.bytesperline = 160,
|
|
.sizeimage = 160 * 120 * 3 / 8 + 590,
|
|
.colorspace = V4L2_COLORSPACE_JPEG,
|
|
.priv = 2},
|
|
{320, 240, V4L2_PIX_FMT_PJPG, V4L2_FIELD_NONE,
|
|
.bytesperline = 320,
|
|
.sizeimage = 320 * 240 * 3 / 8 + 590,
|
|
.colorspace = V4L2_COLORSPACE_JPEG,
|
|
.priv = 1},
|
|
{640, 480, V4L2_PIX_FMT_PJPG, V4L2_FIELD_NONE,
|
|
.bytesperline = 640,
|
|
.sizeimage = 640 * 480 * 3 / 8 + 590,
|
|
.colorspace = V4L2_COLORSPACE_JPEG,
|
|
.priv = 0},
|
|
};
|
|
|
|
#define LOAD_PAGE3 255
|
|
#define LOAD_PAGE4 254
|
|
#define END_OF_SEQUENCE 0
|
|
|
|
/* pac 7311 */
|
|
static const __u8 init_7311[] = {
|
|
0x78, 0x40, /* Bit_0=start stream, Bit_6=LED */
|
|
0x78, 0x40, /* Bit_0=start stream, Bit_6=LED */
|
|
0x78, 0x44, /* Bit_0=start stream, Bit_6=LED */
|
|
0xff, 0x04,
|
|
0x27, 0x80,
|
|
0x28, 0xca,
|
|
0x29, 0x53,
|
|
0x2a, 0x0e,
|
|
0xff, 0x01,
|
|
0x3e, 0x20,
|
|
};
|
|
|
|
static const __u8 start_7311[] = {
|
|
/* index, len, [value]* */
|
|
0xff, 1, 0x01, /* page 1 */
|
|
0x02, 43, 0x48, 0x0a, 0x40, 0x08, 0x00, 0x00, 0x08, 0x00,
|
|
0x06, 0xff, 0x11, 0xff, 0x5a, 0x30, 0x90, 0x4c,
|
|
0x00, 0x07, 0x00, 0x0a, 0x10, 0x00, 0xa0, 0x10,
|
|
0x02, 0x00, 0x00, 0x00, 0x00, 0x0b, 0x01, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00,
|
|
0x3e, 42, 0x00, 0x00, 0x78, 0x52, 0x4a, 0x52, 0x78, 0x6e,
|
|
0x48, 0x46, 0x48, 0x6e, 0x5f, 0x49, 0x42, 0x49,
|
|
0x5f, 0x5f, 0x49, 0x42, 0x49, 0x5f, 0x6e, 0x48,
|
|
0x46, 0x48, 0x6e, 0x78, 0x52, 0x4a, 0x52, 0x78,
|
|
0x00, 0x00, 0x09, 0x1b, 0x34, 0x49, 0x5c, 0x9b,
|
|
0xd0, 0xff,
|
|
0x78, 6, 0x44, 0x00, 0xf2, 0x01, 0x01, 0x80,
|
|
0x7f, 18, 0x2a, 0x1c, 0x00, 0xc8, 0x02, 0x58, 0x03, 0x84,
|
|
0x12, 0x00, 0x1a, 0x04, 0x08, 0x0c, 0x10, 0x14,
|
|
0x18, 0x20,
|
|
0x96, 3, 0x01, 0x08, 0x04,
|
|
0xa0, 4, 0x44, 0x44, 0x44, 0x04,
|
|
0xf0, 13, 0x01, 0x00, 0x00, 0x00, 0x22, 0x00, 0x20, 0x00,
|
|
0x3f, 0x00, 0x0a, 0x01, 0x00,
|
|
0xff, 1, 0x04, /* page 4 */
|
|
0, LOAD_PAGE4, /* load the page 4 */
|
|
0x11, 1, 0x01,
|
|
0, END_OF_SEQUENCE /* end of sequence */
|
|
};
|
|
|
|
#define SKIP 0xaa
|
|
/* page 4 - the value SKIP says skip the index - see reg_w_page() */
|
|
static const __u8 page4_7311[] = {
|
|
SKIP, SKIP, 0x04, 0x54, 0x07, 0x2b, 0x09, 0x0f,
|
|
0x09, 0x00, SKIP, SKIP, 0x07, 0x00, 0x00, 0x62,
|
|
0x08, SKIP, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x03, 0xa0, 0x01, 0xf4, SKIP,
|
|
SKIP, 0x00, 0x08, SKIP, 0x03, SKIP, 0x00, 0x68,
|
|
0xca, 0x10, 0x06, 0x78, 0x00, 0x00, 0x00, 0x00,
|
|
0x23, 0x28, 0x04, 0x11, 0x00, 0x00
|
|
};
|
|
|
|
static void reg_w_buf(struct gspca_dev *gspca_dev,
|
|
__u8 index,
|
|
const char *buffer, int len)
|
|
{
|
|
memcpy(gspca_dev->usb_buf, buffer, len);
|
|
usb_control_msg(gspca_dev->dev,
|
|
usb_sndctrlpipe(gspca_dev->dev, 0),
|
|
1, /* request */
|
|
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
|
|
0, /* value */
|
|
index, gspca_dev->usb_buf, len,
|
|
500);
|
|
}
|
|
|
|
|
|
static void reg_w(struct gspca_dev *gspca_dev,
|
|
__u8 index,
|
|
__u8 value)
|
|
{
|
|
gspca_dev->usb_buf[0] = value;
|
|
usb_control_msg(gspca_dev->dev,
|
|
usb_sndctrlpipe(gspca_dev->dev, 0),
|
|
0, /* request */
|
|
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
|
|
0, index, gspca_dev->usb_buf, 1,
|
|
500);
|
|
}
|
|
|
|
static void reg_w_seq(struct gspca_dev *gspca_dev,
|
|
const __u8 *seq, int len)
|
|
{
|
|
while (--len >= 0) {
|
|
reg_w(gspca_dev, seq[0], seq[1]);
|
|
seq += 2;
|
|
}
|
|
}
|
|
|
|
/* load the beginning of a page */
|
|
static void reg_w_page(struct gspca_dev *gspca_dev,
|
|
const __u8 *page, int len)
|
|
{
|
|
int index;
|
|
|
|
for (index = 0; index < len; index++) {
|
|
if (page[index] == SKIP) /* skip this index */
|
|
continue;
|
|
gspca_dev->usb_buf[0] = page[index];
|
|
usb_control_msg(gspca_dev->dev,
|
|
usb_sndctrlpipe(gspca_dev->dev, 0),
|
|
0, /* request */
|
|
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
|
|
0, index, gspca_dev->usb_buf, 1,
|
|
500);
|
|
}
|
|
}
|
|
|
|
/* output a variable sequence */
|
|
static void reg_w_var(struct gspca_dev *gspca_dev,
|
|
const __u8 *seq,
|
|
const __u8 *page3, unsigned int page3_len,
|
|
const __u8 *page4, unsigned int page4_len)
|
|
{
|
|
int index, len;
|
|
|
|
for (;;) {
|
|
index = *seq++;
|
|
len = *seq++;
|
|
switch (len) {
|
|
case END_OF_SEQUENCE:
|
|
return;
|
|
case LOAD_PAGE4:
|
|
reg_w_page(gspca_dev, page4, page4_len);
|
|
break;
|
|
case LOAD_PAGE3:
|
|
reg_w_page(gspca_dev, page3, page3_len);
|
|
break;
|
|
default:
|
|
if (len > USB_BUF_SZ) {
|
|
PDEBUG(D_ERR|D_STREAM,
|
|
"Incorrect variable sequence");
|
|
return;
|
|
}
|
|
while (len > 0) {
|
|
if (len < 8) {
|
|
reg_w_buf(gspca_dev, index, seq, len);
|
|
seq += len;
|
|
break;
|
|
}
|
|
reg_w_buf(gspca_dev, index, seq, 8);
|
|
seq += 8;
|
|
index += 8;
|
|
len -= 8;
|
|
}
|
|
}
|
|
}
|
|
/* not reached */
|
|
}
|
|
|
|
/* this function is called at probe time for pac7311 */
|
|
static int sd_config(struct gspca_dev *gspca_dev,
|
|
const struct usb_device_id *id)
|
|
{
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
struct cam *cam;
|
|
|
|
cam = &gspca_dev->cam;
|
|
|
|
PDEBUG(D_CONF, "Find Sensor PAC7311");
|
|
cam->cam_mode = vga_mode;
|
|
cam->nmodes = ARRAY_SIZE(vga_mode);
|
|
|
|
sd->contrast = CONTRAST_DEF;
|
|
sd->gain = GAIN_DEF;
|
|
sd->exposure = EXPOSURE_DEF;
|
|
sd->autogain = AUTOGAIN_DEF;
|
|
sd->hflip = HFLIP_DEF;
|
|
sd->vflip = VFLIP_DEF;
|
|
return 0;
|
|
}
|
|
|
|
/* This function is used by pac7311 only */
|
|
static void setcontrast(struct gspca_dev *gspca_dev)
|
|
{
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
reg_w(gspca_dev, 0xff, 0x04);
|
|
reg_w(gspca_dev, 0x10, sd->contrast >> 4);
|
|
/* load registers to sensor (Bit 0, auto clear) */
|
|
reg_w(gspca_dev, 0x11, 0x01);
|
|
}
|
|
|
|
static void setgain(struct gspca_dev *gspca_dev)
|
|
{
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
int gain = GAIN_MAX - sd->gain;
|
|
|
|
if (gain < 1)
|
|
gain = 1;
|
|
else if (gain > 245)
|
|
gain = 245;
|
|
reg_w(gspca_dev, 0xff, 0x04); /* page 4 */
|
|
reg_w(gspca_dev, 0x0e, 0x00);
|
|
reg_w(gspca_dev, 0x0f, gain);
|
|
|
|
/* load registers to sensor (Bit 0, auto clear) */
|
|
reg_w(gspca_dev, 0x11, 0x01);
|
|
}
|
|
|
|
static void setexposure(struct gspca_dev *gspca_dev)
|
|
{
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
__u8 reg;
|
|
|
|
/* register 2 of frame 3/4 contains the clock divider configuring the
|
|
no fps according to the formula: 60 / reg. sd->exposure is the
|
|
desired exposure time in ms. */
|
|
reg = 120 * sd->exposure / 1000;
|
|
if (reg < 2)
|
|
reg = 2;
|
|
else if (reg > 63)
|
|
reg = 63;
|
|
|
|
reg_w(gspca_dev, 0xff, 0x04); /* page 4 */
|
|
reg_w(gspca_dev, 0x02, reg);
|
|
/* Page 1 register 8 must always be 0x08 except when not in
|
|
640x480 mode and Page3/4 reg 2 <= 3 then it must be 9 */
|
|
reg_w(gspca_dev, 0xff, 0x01);
|
|
if (gspca_dev->cam.cam_mode[(int)gspca_dev->curr_mode].priv &&
|
|
reg <= 3)
|
|
reg_w(gspca_dev, 0x08, 0x09);
|
|
else
|
|
reg_w(gspca_dev, 0x08, 0x08);
|
|
|
|
/* load registers to sensor (Bit 0, auto clear) */
|
|
reg_w(gspca_dev, 0x11, 0x01);
|
|
}
|
|
|
|
static void sethvflip(struct gspca_dev *gspca_dev)
|
|
{
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
__u8 data;
|
|
|
|
reg_w(gspca_dev, 0xff, 0x04); /* page 4 */
|
|
data = (sd->hflip ? 0x04 : 0x00) | (sd->vflip ? 0x08 : 0x00);
|
|
reg_w(gspca_dev, 0x21, data);
|
|
/* load registers to sensor (Bit 0, auto clear) */
|
|
reg_w(gspca_dev, 0x11, 0x01);
|
|
}
|
|
|
|
/* this function is called at probe and resume time for pac7311 */
|
|
static int sd_init(struct gspca_dev *gspca_dev)
|
|
{
|
|
reg_w_seq(gspca_dev, init_7311, sizeof init_7311);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sd_start(struct gspca_dev *gspca_dev)
|
|
{
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
sd->sof_read = 0;
|
|
|
|
reg_w_var(gspca_dev, start_7311,
|
|
NULL, 0,
|
|
page4_7311, sizeof(page4_7311));
|
|
setcontrast(gspca_dev);
|
|
setgain(gspca_dev);
|
|
setexposure(gspca_dev);
|
|
sethvflip(gspca_dev);
|
|
|
|
/* set correct resolution */
|
|
switch (gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv) {
|
|
case 2: /* 160x120 pac7311 */
|
|
reg_w(gspca_dev, 0xff, 0x01);
|
|
reg_w(gspca_dev, 0x17, 0x20);
|
|
reg_w(gspca_dev, 0x87, 0x10);
|
|
break;
|
|
case 1: /* 320x240 pac7311 */
|
|
reg_w(gspca_dev, 0xff, 0x01);
|
|
reg_w(gspca_dev, 0x17, 0x30);
|
|
reg_w(gspca_dev, 0x87, 0x11);
|
|
break;
|
|
case 0: /* 640x480 */
|
|
reg_w(gspca_dev, 0xff, 0x01);
|
|
reg_w(gspca_dev, 0x17, 0x00);
|
|
reg_w(gspca_dev, 0x87, 0x12);
|
|
break;
|
|
}
|
|
|
|
sd->sof_read = 0;
|
|
sd->autogain_ignore_frames = 0;
|
|
atomic_set(&sd->avg_lum, -1);
|
|
|
|
/* start stream */
|
|
reg_w(gspca_dev, 0xff, 0x01);
|
|
reg_w(gspca_dev, 0x78, 0x05);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sd_stopN(struct gspca_dev *gspca_dev)
|
|
{
|
|
reg_w(gspca_dev, 0xff, 0x04);
|
|
reg_w(gspca_dev, 0x27, 0x80);
|
|
reg_w(gspca_dev, 0x28, 0xca);
|
|
reg_w(gspca_dev, 0x29, 0x53);
|
|
reg_w(gspca_dev, 0x2a, 0x0e);
|
|
reg_w(gspca_dev, 0xff, 0x01);
|
|
reg_w(gspca_dev, 0x3e, 0x20);
|
|
reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_6=LED */
|
|
reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_6=LED */
|
|
reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_6=LED */
|
|
}
|
|
|
|
/* called on streamoff with alt 0 and on disconnect for 7311 */
|
|
static void sd_stop0(struct gspca_dev *gspca_dev)
|
|
{
|
|
}
|
|
|
|
/* Include pac common sof detection functions */
|
|
#include "pac_common.h"
|
|
|
|
static void do_autogain(struct gspca_dev *gspca_dev)
|
|
{
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
int avg_lum = atomic_read(&sd->avg_lum);
|
|
int desired_lum, deadzone;
|
|
|
|
if (avg_lum == -1)
|
|
return;
|
|
|
|
desired_lum = 200;
|
|
deadzone = 20;
|
|
|
|
if (sd->autogain_ignore_frames > 0)
|
|
sd->autogain_ignore_frames--;
|
|
else if (gspca_auto_gain_n_exposure(gspca_dev, avg_lum, desired_lum,
|
|
deadzone, GAIN_KNEE, EXPOSURE_KNEE))
|
|
sd->autogain_ignore_frames = PAC_AUTOGAIN_IGNORE_FRAMES;
|
|
}
|
|
|
|
/* JPEG header, part 1 */
|
|
static const unsigned char pac_jpeg_header1[] = {
|
|
0xff, 0xd8, /* SOI: Start of Image */
|
|
|
|
0xff, 0xc0, /* SOF0: Start of Frame (Baseline DCT) */
|
|
0x00, 0x11, /* length = 17 bytes (including this length field) */
|
|
0x08 /* Precision: 8 */
|
|
/* 2 bytes is placed here: number of image lines */
|
|
/* 2 bytes is placed here: samples per line */
|
|
};
|
|
|
|
/* JPEG header, continued */
|
|
static const unsigned char pac_jpeg_header2[] = {
|
|
0x03, /* Number of image components: 3 */
|
|
0x01, 0x21, 0x00, /* ID=1, Subsampling 1x1, Quantization table: 0 */
|
|
0x02, 0x11, 0x01, /* ID=2, Subsampling 2x1, Quantization table: 1 */
|
|
0x03, 0x11, 0x01, /* ID=3, Subsampling 2x1, Quantization table: 1 */
|
|
|
|
0xff, 0xda, /* SOS: Start Of Scan */
|
|
0x00, 0x0c, /* length = 12 bytes (including this length field) */
|
|
0x03, /* number of components: 3 */
|
|
0x01, 0x00, /* selector 1, table 0x00 */
|
|
0x02, 0x11, /* selector 2, table 0x11 */
|
|
0x03, 0x11, /* selector 3, table 0x11 */
|
|
0x00, 0x3f, /* Spectral selection: 0 .. 63 */
|
|
0x00 /* Successive approximation: 0 */
|
|
};
|
|
|
|
static void pac_start_frame(struct gspca_dev *gspca_dev,
|
|
struct gspca_frame *frame,
|
|
__u16 lines, __u16 samples_per_line)
|
|
{
|
|
unsigned char tmpbuf[4];
|
|
|
|
gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
|
|
pac_jpeg_header1, sizeof(pac_jpeg_header1));
|
|
|
|
tmpbuf[0] = lines >> 8;
|
|
tmpbuf[1] = lines & 0xff;
|
|
tmpbuf[2] = samples_per_line >> 8;
|
|
tmpbuf[3] = samples_per_line & 0xff;
|
|
|
|
gspca_frame_add(gspca_dev, INTER_PACKET, frame,
|
|
tmpbuf, sizeof(tmpbuf));
|
|
gspca_frame_add(gspca_dev, INTER_PACKET, frame,
|
|
pac_jpeg_header2, sizeof(pac_jpeg_header2));
|
|
}
|
|
|
|
/* this function is run at interrupt level */
|
|
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
|
|
struct gspca_frame *frame, /* target */
|
|
__u8 *data, /* isoc packet */
|
|
int len) /* iso packet length */
|
|
{
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
unsigned char *sof;
|
|
|
|
sof = pac_find_sof(&sd->sof_read, data, len);
|
|
if (sof) {
|
|
int n, lum_offset, footer_length;
|
|
|
|
/* 6 bytes after the FF D9 EOF marker a number of lumination
|
|
bytes are send corresponding to different parts of the
|
|
image, the 14th and 15th byte after the EOF seem to
|
|
correspond to the center of the image */
|
|
lum_offset = 24 + sizeof pac_sof_marker;
|
|
footer_length = 26;
|
|
|
|
/* Finish decoding current frame */
|
|
n = (sof - data) - (footer_length + sizeof pac_sof_marker);
|
|
if (n < 0) {
|
|
frame->data_end += n;
|
|
n = 0;
|
|
}
|
|
frame = gspca_frame_add(gspca_dev, INTER_PACKET, frame,
|
|
data, n);
|
|
if (gspca_dev->last_packet_type != DISCARD_PACKET &&
|
|
frame->data_end[-2] == 0xff &&
|
|
frame->data_end[-1] == 0xd9)
|
|
frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
|
|
NULL, 0);
|
|
|
|
n = sof - data;
|
|
len -= n;
|
|
data = sof;
|
|
|
|
/* Get average lumination */
|
|
if (gspca_dev->last_packet_type == LAST_PACKET &&
|
|
n >= lum_offset)
|
|
atomic_set(&sd->avg_lum, data[-lum_offset] +
|
|
data[-lum_offset + 1]);
|
|
else
|
|
atomic_set(&sd->avg_lum, -1);
|
|
|
|
/* Start the new frame with the jpeg header */
|
|
pac_start_frame(gspca_dev, frame,
|
|
gspca_dev->height, gspca_dev->width);
|
|
}
|
|
gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
|
|
}
|
|
|
|
static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val)
|
|
{
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
sd->contrast = val;
|
|
if (gspca_dev->streaming) {
|
|
setcontrast(gspca_dev);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val)
|
|
{
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
*val = sd->contrast;
|
|
return 0;
|
|
}
|
|
|
|
static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val)
|
|
{
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
sd->gain = val;
|
|
if (gspca_dev->streaming)
|
|
setgain(gspca_dev);
|
|
return 0;
|
|
}
|
|
|
|
static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val)
|
|
{
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
*val = sd->gain;
|
|
return 0;
|
|
}
|
|
|
|
static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val)
|
|
{
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
sd->exposure = val;
|
|
if (gspca_dev->streaming)
|
|
setexposure(gspca_dev);
|
|
return 0;
|
|
}
|
|
|
|
static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val)
|
|
{
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
*val = sd->exposure;
|
|
return 0;
|
|
}
|
|
|
|
static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val)
|
|
{
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
sd->autogain = val;
|
|
/* when switching to autogain set defaults to make sure
|
|
we are on a valid point of the autogain gain /
|
|
exposure knee graph, and give this change time to
|
|
take effect before doing autogain. */
|
|
if (sd->autogain) {
|
|
sd->exposure = EXPOSURE_DEF;
|
|
sd->gain = GAIN_DEF;
|
|
if (gspca_dev->streaming) {
|
|
sd->autogain_ignore_frames =
|
|
PAC_AUTOGAIN_IGNORE_FRAMES;
|
|
setexposure(gspca_dev);
|
|
setgain(gspca_dev);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val)
|
|
{
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
*val = sd->autogain;
|
|
return 0;
|
|
}
|
|
|
|
static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val)
|
|
{
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
sd->hflip = val;
|
|
if (gspca_dev->streaming)
|
|
sethvflip(gspca_dev);
|
|
return 0;
|
|
}
|
|
|
|
static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val)
|
|
{
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
*val = sd->hflip;
|
|
return 0;
|
|
}
|
|
|
|
static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val)
|
|
{
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
sd->vflip = val;
|
|
if (gspca_dev->streaming)
|
|
sethvflip(gspca_dev);
|
|
return 0;
|
|
}
|
|
|
|
static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val)
|
|
{
|
|
struct sd *sd = (struct sd *) gspca_dev;
|
|
|
|
*val = sd->vflip;
|
|
return 0;
|
|
}
|
|
|
|
/* sub-driver description for pac7311 */
|
|
static struct sd_desc sd_desc = {
|
|
.name = MODULE_NAME,
|
|
.ctrls = sd_ctrls,
|
|
.nctrls = ARRAY_SIZE(sd_ctrls),
|
|
.config = sd_config,
|
|
.init = sd_init,
|
|
.start = sd_start,
|
|
.stopN = sd_stopN,
|
|
.stop0 = sd_stop0,
|
|
.pkt_scan = sd_pkt_scan,
|
|
.dq_callback = do_autogain,
|
|
};
|
|
|
|
/* -- module initialisation -- */
|
|
static __devinitdata struct usb_device_id device_table[] = {
|
|
{USB_DEVICE(0x093a, 0x2600)},
|
|
{USB_DEVICE(0x093a, 0x2601)},
|
|
{USB_DEVICE(0x093a, 0x2603)},
|
|
{USB_DEVICE(0x093a, 0x2608)},
|
|
{USB_DEVICE(0x093a, 0x260e)},
|
|
{USB_DEVICE(0x093a, 0x260f)},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(usb, device_table);
|
|
|
|
/* -- device connect -- */
|
|
static int sd_probe(struct usb_interface *intf,
|
|
const struct usb_device_id *id)
|
|
{
|
|
return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd),
|
|
THIS_MODULE);
|
|
}
|
|
|
|
static struct usb_driver sd_driver = {
|
|
.name = MODULE_NAME,
|
|
.id_table = device_table,
|
|
.probe = sd_probe,
|
|
.disconnect = gspca_disconnect,
|
|
#ifdef CONFIG_PM
|
|
.suspend = gspca_suspend,
|
|
.resume = gspca_resume,
|
|
#endif
|
|
};
|
|
|
|
/* -- module insert / remove -- */
|
|
static int __init sd_mod_init(void)
|
|
{
|
|
int ret;
|
|
ret = usb_register(&sd_driver);
|
|
if (ret < 0)
|
|
return ret;
|
|
PDEBUG(D_PROBE, "registered");
|
|
return 0;
|
|
}
|
|
static void __exit sd_mod_exit(void)
|
|
{
|
|
usb_deregister(&sd_driver);
|
|
PDEBUG(D_PROBE, "deregistered");
|
|
}
|
|
|
|
module_init(sd_mod_init);
|
|
module_exit(sd_mod_exit);
|