forked from Minki/linux
fb7f3c4399
In preparation to move the stack to use the generic videmode struct for display timing information rename the y_res member to vactive. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
1348 lines
28 KiB
C
1348 lines
28 KiB
C
/*
|
|
* Generic DSI Command Mode panel driver
|
|
*
|
|
* Copyright (C) 2013 Texas Instruments
|
|
* Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published by
|
|
* the Free Software Foundation.
|
|
*/
|
|
|
|
/* #define DEBUG */
|
|
|
|
#include <linux/backlight.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_gpio.h>
|
|
|
|
#include <video/mipi_display.h>
|
|
|
|
#include "../dss/omapdss.h"
|
|
|
|
/* DSI Virtual channel. Hardcoded for now. */
|
|
#define TCH 0
|
|
|
|
#define DCS_READ_NUM_ERRORS 0x05
|
|
#define DCS_BRIGHTNESS 0x51
|
|
#define DCS_CTRL_DISPLAY 0x53
|
|
#define DCS_GET_ID1 0xda
|
|
#define DCS_GET_ID2 0xdb
|
|
#define DCS_GET_ID3 0xdc
|
|
|
|
struct panel_drv_data {
|
|
struct omap_dss_device dssdev;
|
|
struct omap_dss_device *in;
|
|
|
|
struct omap_video_timings timings;
|
|
|
|
struct platform_device *pdev;
|
|
|
|
struct mutex lock;
|
|
|
|
struct backlight_device *bldev;
|
|
|
|
unsigned long hw_guard_end; /* next value of jiffies when we can
|
|
* issue the next sleep in/out command
|
|
*/
|
|
unsigned long hw_guard_wait; /* max guard time in jiffies */
|
|
|
|
/* panel HW configuration from DT or platform data */
|
|
int reset_gpio;
|
|
int ext_te_gpio;
|
|
|
|
bool use_dsi_backlight;
|
|
|
|
struct omap_dsi_pin_config pin_config;
|
|
|
|
/* runtime variables */
|
|
bool enabled;
|
|
|
|
bool te_enabled;
|
|
|
|
atomic_t do_update;
|
|
int channel;
|
|
|
|
struct delayed_work te_timeout_work;
|
|
|
|
bool intro_printed;
|
|
|
|
struct workqueue_struct *workqueue;
|
|
|
|
bool ulps_enabled;
|
|
unsigned ulps_timeout;
|
|
struct delayed_work ulps_work;
|
|
};
|
|
|
|
#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
|
|
|
|
static irqreturn_t dsicm_te_isr(int irq, void *data);
|
|
static void dsicm_te_timeout_work_callback(struct work_struct *work);
|
|
static int _dsicm_enable_te(struct panel_drv_data *ddata, bool enable);
|
|
|
|
static int dsicm_panel_reset(struct panel_drv_data *ddata);
|
|
|
|
static void dsicm_ulps_work(struct work_struct *work);
|
|
|
|
static void hw_guard_start(struct panel_drv_data *ddata, int guard_msec)
|
|
{
|
|
ddata->hw_guard_wait = msecs_to_jiffies(guard_msec);
|
|
ddata->hw_guard_end = jiffies + ddata->hw_guard_wait;
|
|
}
|
|
|
|
static void hw_guard_wait(struct panel_drv_data *ddata)
|
|
{
|
|
unsigned long wait = ddata->hw_guard_end - jiffies;
|
|
|
|
if ((long)wait > 0 && wait <= ddata->hw_guard_wait) {
|
|
set_current_state(TASK_UNINTERRUPTIBLE);
|
|
schedule_timeout(wait);
|
|
}
|
|
}
|
|
|
|
static int dsicm_dcs_read_1(struct panel_drv_data *ddata, u8 dcs_cmd, u8 *data)
|
|
{
|
|
struct omap_dss_device *in = ddata->in;
|
|
int r;
|
|
u8 buf[1];
|
|
|
|
r = in->ops.dsi->dcs_read(in, ddata->channel, dcs_cmd, buf, 1);
|
|
|
|
if (r < 0)
|
|
return r;
|
|
|
|
*data = buf[0];
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dsicm_dcs_write_0(struct panel_drv_data *ddata, u8 dcs_cmd)
|
|
{
|
|
struct omap_dss_device *in = ddata->in;
|
|
return in->ops.dsi->dcs_write(in, ddata->channel, &dcs_cmd, 1);
|
|
}
|
|
|
|
static int dsicm_dcs_write_1(struct panel_drv_data *ddata, u8 dcs_cmd, u8 param)
|
|
{
|
|
struct omap_dss_device *in = ddata->in;
|
|
u8 buf[2] = { dcs_cmd, param };
|
|
|
|
return in->ops.dsi->dcs_write(in, ddata->channel, buf, 2);
|
|
}
|
|
|
|
static int dsicm_sleep_in(struct panel_drv_data *ddata)
|
|
|
|
{
|
|
struct omap_dss_device *in = ddata->in;
|
|
u8 cmd;
|
|
int r;
|
|
|
|
hw_guard_wait(ddata);
|
|
|
|
cmd = MIPI_DCS_ENTER_SLEEP_MODE;
|
|
r = in->ops.dsi->dcs_write_nosync(in, ddata->channel, &cmd, 1);
|
|
if (r)
|
|
return r;
|
|
|
|
hw_guard_start(ddata, 120);
|
|
|
|
usleep_range(5000, 10000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dsicm_sleep_out(struct panel_drv_data *ddata)
|
|
{
|
|
int r;
|
|
|
|
hw_guard_wait(ddata);
|
|
|
|
r = dsicm_dcs_write_0(ddata, MIPI_DCS_EXIT_SLEEP_MODE);
|
|
if (r)
|
|
return r;
|
|
|
|
hw_guard_start(ddata, 120);
|
|
|
|
usleep_range(5000, 10000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dsicm_get_id(struct panel_drv_data *ddata, u8 *id1, u8 *id2, u8 *id3)
|
|
{
|
|
int r;
|
|
|
|
r = dsicm_dcs_read_1(ddata, DCS_GET_ID1, id1);
|
|
if (r)
|
|
return r;
|
|
r = dsicm_dcs_read_1(ddata, DCS_GET_ID2, id2);
|
|
if (r)
|
|
return r;
|
|
r = dsicm_dcs_read_1(ddata, DCS_GET_ID3, id3);
|
|
if (r)
|
|
return r;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dsicm_set_update_window(struct panel_drv_data *ddata,
|
|
u16 x, u16 y, u16 w, u16 h)
|
|
{
|
|
struct omap_dss_device *in = ddata->in;
|
|
int r;
|
|
u16 x1 = x;
|
|
u16 x2 = x + w - 1;
|
|
u16 y1 = y;
|
|
u16 y2 = y + h - 1;
|
|
|
|
u8 buf[5];
|
|
buf[0] = MIPI_DCS_SET_COLUMN_ADDRESS;
|
|
buf[1] = (x1 >> 8) & 0xff;
|
|
buf[2] = (x1 >> 0) & 0xff;
|
|
buf[3] = (x2 >> 8) & 0xff;
|
|
buf[4] = (x2 >> 0) & 0xff;
|
|
|
|
r = in->ops.dsi->dcs_write_nosync(in, ddata->channel, buf, sizeof(buf));
|
|
if (r)
|
|
return r;
|
|
|
|
buf[0] = MIPI_DCS_SET_PAGE_ADDRESS;
|
|
buf[1] = (y1 >> 8) & 0xff;
|
|
buf[2] = (y1 >> 0) & 0xff;
|
|
buf[3] = (y2 >> 8) & 0xff;
|
|
buf[4] = (y2 >> 0) & 0xff;
|
|
|
|
r = in->ops.dsi->dcs_write_nosync(in, ddata->channel, buf, sizeof(buf));
|
|
if (r)
|
|
return r;
|
|
|
|
in->ops.dsi->bta_sync(in, ddata->channel);
|
|
|
|
return r;
|
|
}
|
|
|
|
static void dsicm_queue_ulps_work(struct panel_drv_data *ddata)
|
|
{
|
|
if (ddata->ulps_timeout > 0)
|
|
queue_delayed_work(ddata->workqueue, &ddata->ulps_work,
|
|
msecs_to_jiffies(ddata->ulps_timeout));
|
|
}
|
|
|
|
static void dsicm_cancel_ulps_work(struct panel_drv_data *ddata)
|
|
{
|
|
cancel_delayed_work(&ddata->ulps_work);
|
|
}
|
|
|
|
static int dsicm_enter_ulps(struct panel_drv_data *ddata)
|
|
{
|
|
struct omap_dss_device *in = ddata->in;
|
|
int r;
|
|
|
|
if (ddata->ulps_enabled)
|
|
return 0;
|
|
|
|
dsicm_cancel_ulps_work(ddata);
|
|
|
|
r = _dsicm_enable_te(ddata, false);
|
|
if (r)
|
|
goto err;
|
|
|
|
if (gpio_is_valid(ddata->ext_te_gpio))
|
|
disable_irq(gpio_to_irq(ddata->ext_te_gpio));
|
|
|
|
in->ops.dsi->disable(in, false, true);
|
|
|
|
ddata->ulps_enabled = true;
|
|
|
|
return 0;
|
|
|
|
err:
|
|
dev_err(&ddata->pdev->dev, "enter ULPS failed");
|
|
dsicm_panel_reset(ddata);
|
|
|
|
ddata->ulps_enabled = false;
|
|
|
|
dsicm_queue_ulps_work(ddata);
|
|
|
|
return r;
|
|
}
|
|
|
|
static int dsicm_exit_ulps(struct panel_drv_data *ddata)
|
|
{
|
|
struct omap_dss_device *in = ddata->in;
|
|
int r;
|
|
|
|
if (!ddata->ulps_enabled)
|
|
return 0;
|
|
|
|
r = in->ops.dsi->enable(in);
|
|
if (r) {
|
|
dev_err(&ddata->pdev->dev, "failed to enable DSI\n");
|
|
goto err1;
|
|
}
|
|
|
|
in->ops.dsi->enable_hs(in, ddata->channel, true);
|
|
|
|
r = _dsicm_enable_te(ddata, true);
|
|
if (r) {
|
|
dev_err(&ddata->pdev->dev, "failed to re-enable TE");
|
|
goto err2;
|
|
}
|
|
|
|
if (gpio_is_valid(ddata->ext_te_gpio))
|
|
enable_irq(gpio_to_irq(ddata->ext_te_gpio));
|
|
|
|
dsicm_queue_ulps_work(ddata);
|
|
|
|
ddata->ulps_enabled = false;
|
|
|
|
return 0;
|
|
|
|
err2:
|
|
dev_err(&ddata->pdev->dev, "failed to exit ULPS");
|
|
|
|
r = dsicm_panel_reset(ddata);
|
|
if (!r) {
|
|
if (gpio_is_valid(ddata->ext_te_gpio))
|
|
enable_irq(gpio_to_irq(ddata->ext_te_gpio));
|
|
ddata->ulps_enabled = false;
|
|
}
|
|
err1:
|
|
dsicm_queue_ulps_work(ddata);
|
|
|
|
return r;
|
|
}
|
|
|
|
static int dsicm_wake_up(struct panel_drv_data *ddata)
|
|
{
|
|
if (ddata->ulps_enabled)
|
|
return dsicm_exit_ulps(ddata);
|
|
|
|
dsicm_cancel_ulps_work(ddata);
|
|
dsicm_queue_ulps_work(ddata);
|
|
return 0;
|
|
}
|
|
|
|
static int dsicm_bl_update_status(struct backlight_device *dev)
|
|
{
|
|
struct panel_drv_data *ddata = dev_get_drvdata(&dev->dev);
|
|
struct omap_dss_device *in = ddata->in;
|
|
int r;
|
|
int level;
|
|
|
|
if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
|
|
dev->props.power == FB_BLANK_UNBLANK)
|
|
level = dev->props.brightness;
|
|
else
|
|
level = 0;
|
|
|
|
dev_dbg(&ddata->pdev->dev, "update brightness to %d\n", level);
|
|
|
|
mutex_lock(&ddata->lock);
|
|
|
|
if (ddata->enabled) {
|
|
in->ops.dsi->bus_lock(in);
|
|
|
|
r = dsicm_wake_up(ddata);
|
|
if (!r)
|
|
r = dsicm_dcs_write_1(ddata, DCS_BRIGHTNESS, level);
|
|
|
|
in->ops.dsi->bus_unlock(in);
|
|
} else {
|
|
r = 0;
|
|
}
|
|
|
|
mutex_unlock(&ddata->lock);
|
|
|
|
return r;
|
|
}
|
|
|
|
static int dsicm_bl_get_intensity(struct backlight_device *dev)
|
|
{
|
|
if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
|
|
dev->props.power == FB_BLANK_UNBLANK)
|
|
return dev->props.brightness;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct backlight_ops dsicm_bl_ops = {
|
|
.get_brightness = dsicm_bl_get_intensity,
|
|
.update_status = dsicm_bl_update_status,
|
|
};
|
|
|
|
static void dsicm_get_resolution(struct omap_dss_device *dssdev,
|
|
u16 *xres, u16 *yres)
|
|
{
|
|
*xres = dssdev->panel.timings.hactive;
|
|
*yres = dssdev->panel.timings.vactive;
|
|
}
|
|
|
|
static ssize_t dsicm_num_errors_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
|
|
struct omap_dss_device *in = ddata->in;
|
|
u8 errors = 0;
|
|
int r;
|
|
|
|
mutex_lock(&ddata->lock);
|
|
|
|
if (ddata->enabled) {
|
|
in->ops.dsi->bus_lock(in);
|
|
|
|
r = dsicm_wake_up(ddata);
|
|
if (!r)
|
|
r = dsicm_dcs_read_1(ddata, DCS_READ_NUM_ERRORS,
|
|
&errors);
|
|
|
|
in->ops.dsi->bus_unlock(in);
|
|
} else {
|
|
r = -ENODEV;
|
|
}
|
|
|
|
mutex_unlock(&ddata->lock);
|
|
|
|
if (r)
|
|
return r;
|
|
|
|
return snprintf(buf, PAGE_SIZE, "%d\n", errors);
|
|
}
|
|
|
|
static ssize_t dsicm_hw_revision_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
|
|
struct omap_dss_device *in = ddata->in;
|
|
u8 id1, id2, id3;
|
|
int r;
|
|
|
|
mutex_lock(&ddata->lock);
|
|
|
|
if (ddata->enabled) {
|
|
in->ops.dsi->bus_lock(in);
|
|
|
|
r = dsicm_wake_up(ddata);
|
|
if (!r)
|
|
r = dsicm_get_id(ddata, &id1, &id2, &id3);
|
|
|
|
in->ops.dsi->bus_unlock(in);
|
|
} else {
|
|
r = -ENODEV;
|
|
}
|
|
|
|
mutex_unlock(&ddata->lock);
|
|
|
|
if (r)
|
|
return r;
|
|
|
|
return snprintf(buf, PAGE_SIZE, "%02x.%02x.%02x\n", id1, id2, id3);
|
|
}
|
|
|
|
static ssize_t dsicm_store_ulps(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
|
|
struct omap_dss_device *in = ddata->in;
|
|
unsigned long t;
|
|
int r;
|
|
|
|
r = kstrtoul(buf, 0, &t);
|
|
if (r)
|
|
return r;
|
|
|
|
mutex_lock(&ddata->lock);
|
|
|
|
if (ddata->enabled) {
|
|
in->ops.dsi->bus_lock(in);
|
|
|
|
if (t)
|
|
r = dsicm_enter_ulps(ddata);
|
|
else
|
|
r = dsicm_wake_up(ddata);
|
|
|
|
in->ops.dsi->bus_unlock(in);
|
|
}
|
|
|
|
mutex_unlock(&ddata->lock);
|
|
|
|
if (r)
|
|
return r;
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t dsicm_show_ulps(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
|
|
unsigned t;
|
|
|
|
mutex_lock(&ddata->lock);
|
|
t = ddata->ulps_enabled;
|
|
mutex_unlock(&ddata->lock);
|
|
|
|
return snprintf(buf, PAGE_SIZE, "%u\n", t);
|
|
}
|
|
|
|
static ssize_t dsicm_store_ulps_timeout(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
|
|
struct omap_dss_device *in = ddata->in;
|
|
unsigned long t;
|
|
int r;
|
|
|
|
r = kstrtoul(buf, 0, &t);
|
|
if (r)
|
|
return r;
|
|
|
|
mutex_lock(&ddata->lock);
|
|
ddata->ulps_timeout = t;
|
|
|
|
if (ddata->enabled) {
|
|
/* dsicm_wake_up will restart the timer */
|
|
in->ops.dsi->bus_lock(in);
|
|
r = dsicm_wake_up(ddata);
|
|
in->ops.dsi->bus_unlock(in);
|
|
}
|
|
|
|
mutex_unlock(&ddata->lock);
|
|
|
|
if (r)
|
|
return r;
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t dsicm_show_ulps_timeout(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
|
|
unsigned t;
|
|
|
|
mutex_lock(&ddata->lock);
|
|
t = ddata->ulps_timeout;
|
|
mutex_unlock(&ddata->lock);
|
|
|
|
return snprintf(buf, PAGE_SIZE, "%u\n", t);
|
|
}
|
|
|
|
static DEVICE_ATTR(num_dsi_errors, S_IRUGO, dsicm_num_errors_show, NULL);
|
|
static DEVICE_ATTR(hw_revision, S_IRUGO, dsicm_hw_revision_show, NULL);
|
|
static DEVICE_ATTR(ulps, S_IRUGO | S_IWUSR,
|
|
dsicm_show_ulps, dsicm_store_ulps);
|
|
static DEVICE_ATTR(ulps_timeout, S_IRUGO | S_IWUSR,
|
|
dsicm_show_ulps_timeout, dsicm_store_ulps_timeout);
|
|
|
|
static struct attribute *dsicm_attrs[] = {
|
|
&dev_attr_num_dsi_errors.attr,
|
|
&dev_attr_hw_revision.attr,
|
|
&dev_attr_ulps.attr,
|
|
&dev_attr_ulps_timeout.attr,
|
|
NULL,
|
|
};
|
|
|
|
static struct attribute_group dsicm_attr_group = {
|
|
.attrs = dsicm_attrs,
|
|
};
|
|
|
|
static void dsicm_hw_reset(struct panel_drv_data *ddata)
|
|
{
|
|
if (!gpio_is_valid(ddata->reset_gpio))
|
|
return;
|
|
|
|
gpio_set_value(ddata->reset_gpio, 1);
|
|
udelay(10);
|
|
/* reset the panel */
|
|
gpio_set_value(ddata->reset_gpio, 0);
|
|
/* assert reset */
|
|
udelay(10);
|
|
gpio_set_value(ddata->reset_gpio, 1);
|
|
/* wait after releasing reset */
|
|
usleep_range(5000, 10000);
|
|
}
|
|
|
|
static int dsicm_power_on(struct panel_drv_data *ddata)
|
|
{
|
|
struct omap_dss_device *in = ddata->in;
|
|
u8 id1, id2, id3;
|
|
int r;
|
|
struct omap_dss_dsi_config dsi_config = {
|
|
.mode = OMAP_DSS_DSI_CMD_MODE,
|
|
.pixel_format = OMAP_DSS_DSI_FMT_RGB888,
|
|
.timings = &ddata->timings,
|
|
.hs_clk_min = 150000000,
|
|
.hs_clk_max = 300000000,
|
|
.lp_clk_min = 7000000,
|
|
.lp_clk_max = 10000000,
|
|
};
|
|
|
|
if (ddata->pin_config.num_pins > 0) {
|
|
r = in->ops.dsi->configure_pins(in, &ddata->pin_config);
|
|
if (r) {
|
|
dev_err(&ddata->pdev->dev,
|
|
"failed to configure DSI pins\n");
|
|
goto err0;
|
|
}
|
|
}
|
|
|
|
r = in->ops.dsi->set_config(in, &dsi_config);
|
|
if (r) {
|
|
dev_err(&ddata->pdev->dev, "failed to configure DSI\n");
|
|
goto err0;
|
|
}
|
|
|
|
r = in->ops.dsi->enable(in);
|
|
if (r) {
|
|
dev_err(&ddata->pdev->dev, "failed to enable DSI\n");
|
|
goto err0;
|
|
}
|
|
|
|
dsicm_hw_reset(ddata);
|
|
|
|
in->ops.dsi->enable_hs(in, ddata->channel, false);
|
|
|
|
r = dsicm_sleep_out(ddata);
|
|
if (r)
|
|
goto err;
|
|
|
|
r = dsicm_get_id(ddata, &id1, &id2, &id3);
|
|
if (r)
|
|
goto err;
|
|
|
|
r = dsicm_dcs_write_1(ddata, DCS_BRIGHTNESS, 0xff);
|
|
if (r)
|
|
goto err;
|
|
|
|
r = dsicm_dcs_write_1(ddata, DCS_CTRL_DISPLAY,
|
|
(1<<2) | (1<<5)); /* BL | BCTRL */
|
|
if (r)
|
|
goto err;
|
|
|
|
r = dsicm_dcs_write_1(ddata, MIPI_DCS_SET_PIXEL_FORMAT,
|
|
MIPI_DCS_PIXEL_FMT_24BIT);
|
|
if (r)
|
|
goto err;
|
|
|
|
r = dsicm_dcs_write_0(ddata, MIPI_DCS_SET_DISPLAY_ON);
|
|
if (r)
|
|
goto err;
|
|
|
|
r = _dsicm_enable_te(ddata, ddata->te_enabled);
|
|
if (r)
|
|
goto err;
|
|
|
|
r = in->ops.dsi->enable_video_output(in, ddata->channel);
|
|
if (r)
|
|
goto err;
|
|
|
|
ddata->enabled = 1;
|
|
|
|
if (!ddata->intro_printed) {
|
|
dev_info(&ddata->pdev->dev, "panel revision %02x.%02x.%02x\n",
|
|
id1, id2, id3);
|
|
ddata->intro_printed = true;
|
|
}
|
|
|
|
in->ops.dsi->enable_hs(in, ddata->channel, true);
|
|
|
|
return 0;
|
|
err:
|
|
dev_err(&ddata->pdev->dev, "error while enabling panel, issuing HW reset\n");
|
|
|
|
dsicm_hw_reset(ddata);
|
|
|
|
in->ops.dsi->disable(in, true, false);
|
|
err0:
|
|
return r;
|
|
}
|
|
|
|
static void dsicm_power_off(struct panel_drv_data *ddata)
|
|
{
|
|
struct omap_dss_device *in = ddata->in;
|
|
int r;
|
|
|
|
in->ops.dsi->disable_video_output(in, ddata->channel);
|
|
|
|
r = dsicm_dcs_write_0(ddata, MIPI_DCS_SET_DISPLAY_OFF);
|
|
if (!r)
|
|
r = dsicm_sleep_in(ddata);
|
|
|
|
if (r) {
|
|
dev_err(&ddata->pdev->dev,
|
|
"error disabling panel, issuing HW reset\n");
|
|
dsicm_hw_reset(ddata);
|
|
}
|
|
|
|
in->ops.dsi->disable(in, true, false);
|
|
|
|
ddata->enabled = 0;
|
|
}
|
|
|
|
static int dsicm_panel_reset(struct panel_drv_data *ddata)
|
|
{
|
|
dev_err(&ddata->pdev->dev, "performing LCD reset\n");
|
|
|
|
dsicm_power_off(ddata);
|
|
dsicm_hw_reset(ddata);
|
|
return dsicm_power_on(ddata);
|
|
}
|
|
|
|
static int dsicm_connect(struct omap_dss_device *dssdev)
|
|
{
|
|
struct panel_drv_data *ddata = to_panel_data(dssdev);
|
|
struct omap_dss_device *in = ddata->in;
|
|
struct device *dev = &ddata->pdev->dev;
|
|
int r;
|
|
|
|
if (omapdss_device_is_connected(dssdev))
|
|
return 0;
|
|
|
|
r = in->ops.dsi->connect(in, dssdev);
|
|
if (r) {
|
|
dev_err(dev, "Failed to connect to video source\n");
|
|
return r;
|
|
}
|
|
|
|
r = in->ops.dsi->request_vc(ddata->in, &ddata->channel);
|
|
if (r) {
|
|
dev_err(dev, "failed to get virtual channel\n");
|
|
goto err_req_vc;
|
|
}
|
|
|
|
r = in->ops.dsi->set_vc_id(ddata->in, ddata->channel, TCH);
|
|
if (r) {
|
|
dev_err(dev, "failed to set VC_ID\n");
|
|
goto err_vc_id;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_vc_id:
|
|
in->ops.dsi->release_vc(ddata->in, ddata->channel);
|
|
err_req_vc:
|
|
in->ops.dsi->disconnect(in, dssdev);
|
|
return r;
|
|
}
|
|
|
|
static void dsicm_disconnect(struct omap_dss_device *dssdev)
|
|
{
|
|
struct panel_drv_data *ddata = to_panel_data(dssdev);
|
|
struct omap_dss_device *in = ddata->in;
|
|
|
|
if (!omapdss_device_is_connected(dssdev))
|
|
return;
|
|
|
|
in->ops.dsi->release_vc(in, ddata->channel);
|
|
in->ops.dsi->disconnect(in, dssdev);
|
|
}
|
|
|
|
static int dsicm_enable(struct omap_dss_device *dssdev)
|
|
{
|
|
struct panel_drv_data *ddata = to_panel_data(dssdev);
|
|
struct omap_dss_device *in = ddata->in;
|
|
int r;
|
|
|
|
dev_dbg(&ddata->pdev->dev, "enable\n");
|
|
|
|
mutex_lock(&ddata->lock);
|
|
|
|
if (!omapdss_device_is_connected(dssdev)) {
|
|
r = -ENODEV;
|
|
goto err;
|
|
}
|
|
|
|
if (omapdss_device_is_enabled(dssdev)) {
|
|
r = 0;
|
|
goto err;
|
|
}
|
|
|
|
in->ops.dsi->bus_lock(in);
|
|
|
|
r = dsicm_power_on(ddata);
|
|
|
|
in->ops.dsi->bus_unlock(in);
|
|
|
|
if (r)
|
|
goto err;
|
|
|
|
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
|
|
|
|
mutex_unlock(&ddata->lock);
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&ddata->pdev->dev, "enable failed\n");
|
|
mutex_unlock(&ddata->lock);
|
|
return r;
|
|
}
|
|
|
|
static void dsicm_disable(struct omap_dss_device *dssdev)
|
|
{
|
|
struct panel_drv_data *ddata = to_panel_data(dssdev);
|
|
struct omap_dss_device *in = ddata->in;
|
|
int r;
|
|
|
|
dev_dbg(&ddata->pdev->dev, "disable\n");
|
|
|
|
mutex_lock(&ddata->lock);
|
|
|
|
dsicm_cancel_ulps_work(ddata);
|
|
|
|
in->ops.dsi->bus_lock(in);
|
|
|
|
if (omapdss_device_is_enabled(dssdev)) {
|
|
r = dsicm_wake_up(ddata);
|
|
if (!r)
|
|
dsicm_power_off(ddata);
|
|
}
|
|
|
|
in->ops.dsi->bus_unlock(in);
|
|
|
|
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
|
|
|
|
mutex_unlock(&ddata->lock);
|
|
}
|
|
|
|
static void dsicm_framedone_cb(int err, void *data)
|
|
{
|
|
struct panel_drv_data *ddata = data;
|
|
struct omap_dss_device *in = ddata->in;
|
|
|
|
dev_dbg(&ddata->pdev->dev, "framedone, err %d\n", err);
|
|
in->ops.dsi->bus_unlock(ddata->in);
|
|
}
|
|
|
|
static irqreturn_t dsicm_te_isr(int irq, void *data)
|
|
{
|
|
struct panel_drv_data *ddata = data;
|
|
struct omap_dss_device *in = ddata->in;
|
|
int old;
|
|
int r;
|
|
|
|
old = atomic_cmpxchg(&ddata->do_update, 1, 0);
|
|
|
|
if (old) {
|
|
cancel_delayed_work(&ddata->te_timeout_work);
|
|
|
|
r = in->ops.dsi->update(in, ddata->channel, dsicm_framedone_cb,
|
|
ddata);
|
|
if (r)
|
|
goto err;
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
err:
|
|
dev_err(&ddata->pdev->dev, "start update failed\n");
|
|
in->ops.dsi->bus_unlock(in);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void dsicm_te_timeout_work_callback(struct work_struct *work)
|
|
{
|
|
struct panel_drv_data *ddata = container_of(work, struct panel_drv_data,
|
|
te_timeout_work.work);
|
|
struct omap_dss_device *in = ddata->in;
|
|
|
|
dev_err(&ddata->pdev->dev, "TE not received for 250ms!\n");
|
|
|
|
atomic_set(&ddata->do_update, 0);
|
|
in->ops.dsi->bus_unlock(in);
|
|
}
|
|
|
|
static int dsicm_update(struct omap_dss_device *dssdev,
|
|
u16 x, u16 y, u16 w, u16 h)
|
|
{
|
|
struct panel_drv_data *ddata = to_panel_data(dssdev);
|
|
struct omap_dss_device *in = ddata->in;
|
|
int r;
|
|
|
|
dev_dbg(&ddata->pdev->dev, "update %d, %d, %d x %d\n", x, y, w, h);
|
|
|
|
mutex_lock(&ddata->lock);
|
|
in->ops.dsi->bus_lock(in);
|
|
|
|
r = dsicm_wake_up(ddata);
|
|
if (r)
|
|
goto err;
|
|
|
|
if (!ddata->enabled) {
|
|
r = 0;
|
|
goto err;
|
|
}
|
|
|
|
/* XXX no need to send this every frame, but dsi break if not done */
|
|
r = dsicm_set_update_window(ddata, 0, 0,
|
|
dssdev->panel.timings.hactive,
|
|
dssdev->panel.timings.vactive);
|
|
if (r)
|
|
goto err;
|
|
|
|
if (ddata->te_enabled && gpio_is_valid(ddata->ext_te_gpio)) {
|
|
schedule_delayed_work(&ddata->te_timeout_work,
|
|
msecs_to_jiffies(250));
|
|
atomic_set(&ddata->do_update, 1);
|
|
} else {
|
|
r = in->ops.dsi->update(in, ddata->channel, dsicm_framedone_cb,
|
|
ddata);
|
|
if (r)
|
|
goto err;
|
|
}
|
|
|
|
/* note: no bus_unlock here. unlock is in framedone_cb */
|
|
mutex_unlock(&ddata->lock);
|
|
return 0;
|
|
err:
|
|
in->ops.dsi->bus_unlock(in);
|
|
mutex_unlock(&ddata->lock);
|
|
return r;
|
|
}
|
|
|
|
static int dsicm_sync(struct omap_dss_device *dssdev)
|
|
{
|
|
struct panel_drv_data *ddata = to_panel_data(dssdev);
|
|
struct omap_dss_device *in = ddata->in;
|
|
|
|
dev_dbg(&ddata->pdev->dev, "sync\n");
|
|
|
|
mutex_lock(&ddata->lock);
|
|
in->ops.dsi->bus_lock(in);
|
|
in->ops.dsi->bus_unlock(in);
|
|
mutex_unlock(&ddata->lock);
|
|
|
|
dev_dbg(&ddata->pdev->dev, "sync done\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int _dsicm_enable_te(struct panel_drv_data *ddata, bool enable)
|
|
{
|
|
struct omap_dss_device *in = ddata->in;
|
|
int r;
|
|
|
|
if (enable)
|
|
r = dsicm_dcs_write_1(ddata, MIPI_DCS_SET_TEAR_ON, 0);
|
|
else
|
|
r = dsicm_dcs_write_0(ddata, MIPI_DCS_SET_TEAR_OFF);
|
|
|
|
if (!gpio_is_valid(ddata->ext_te_gpio))
|
|
in->ops.dsi->enable_te(in, enable);
|
|
|
|
/* possible panel bug */
|
|
msleep(100);
|
|
|
|
return r;
|
|
}
|
|
|
|
static int dsicm_enable_te(struct omap_dss_device *dssdev, bool enable)
|
|
{
|
|
struct panel_drv_data *ddata = to_panel_data(dssdev);
|
|
struct omap_dss_device *in = ddata->in;
|
|
int r;
|
|
|
|
mutex_lock(&ddata->lock);
|
|
|
|
if (ddata->te_enabled == enable)
|
|
goto end;
|
|
|
|
in->ops.dsi->bus_lock(in);
|
|
|
|
if (ddata->enabled) {
|
|
r = dsicm_wake_up(ddata);
|
|
if (r)
|
|
goto err;
|
|
|
|
r = _dsicm_enable_te(ddata, enable);
|
|
if (r)
|
|
goto err;
|
|
}
|
|
|
|
ddata->te_enabled = enable;
|
|
|
|
in->ops.dsi->bus_unlock(in);
|
|
end:
|
|
mutex_unlock(&ddata->lock);
|
|
|
|
return 0;
|
|
err:
|
|
in->ops.dsi->bus_unlock(in);
|
|
mutex_unlock(&ddata->lock);
|
|
|
|
return r;
|
|
}
|
|
|
|
static int dsicm_get_te(struct omap_dss_device *dssdev)
|
|
{
|
|
struct panel_drv_data *ddata = to_panel_data(dssdev);
|
|
int r;
|
|
|
|
mutex_lock(&ddata->lock);
|
|
r = ddata->te_enabled;
|
|
mutex_unlock(&ddata->lock);
|
|
|
|
return r;
|
|
}
|
|
|
|
static int dsicm_memory_read(struct omap_dss_device *dssdev,
|
|
void *buf, size_t size,
|
|
u16 x, u16 y, u16 w, u16 h)
|
|
{
|
|
struct panel_drv_data *ddata = to_panel_data(dssdev);
|
|
struct omap_dss_device *in = ddata->in;
|
|
int r;
|
|
int first = 1;
|
|
int plen;
|
|
unsigned buf_used = 0;
|
|
|
|
if (size < w * h * 3)
|
|
return -ENOMEM;
|
|
|
|
mutex_lock(&ddata->lock);
|
|
|
|
if (!ddata->enabled) {
|
|
r = -ENODEV;
|
|
goto err1;
|
|
}
|
|
|
|
size = min(w * h * 3,
|
|
dssdev->panel.timings.hactive *
|
|
dssdev->panel.timings.vactive * 3);
|
|
|
|
in->ops.dsi->bus_lock(in);
|
|
|
|
r = dsicm_wake_up(ddata);
|
|
if (r)
|
|
goto err2;
|
|
|
|
/* plen 1 or 2 goes into short packet. until checksum error is fixed,
|
|
* use short packets. plen 32 works, but bigger packets seem to cause
|
|
* an error. */
|
|
if (size % 2)
|
|
plen = 1;
|
|
else
|
|
plen = 2;
|
|
|
|
dsicm_set_update_window(ddata, x, y, w, h);
|
|
|
|
r = in->ops.dsi->set_max_rx_packet_size(in, ddata->channel, plen);
|
|
if (r)
|
|
goto err2;
|
|
|
|
while (buf_used < size) {
|
|
u8 dcs_cmd = first ? 0x2e : 0x3e;
|
|
first = 0;
|
|
|
|
r = in->ops.dsi->dcs_read(in, ddata->channel, dcs_cmd,
|
|
buf + buf_used, size - buf_used);
|
|
|
|
if (r < 0) {
|
|
dev_err(dssdev->dev, "read error\n");
|
|
goto err3;
|
|
}
|
|
|
|
buf_used += r;
|
|
|
|
if (r < plen) {
|
|
dev_err(&ddata->pdev->dev, "short read\n");
|
|
break;
|
|
}
|
|
|
|
if (signal_pending(current)) {
|
|
dev_err(&ddata->pdev->dev, "signal pending, "
|
|
"aborting memory read\n");
|
|
r = -ERESTARTSYS;
|
|
goto err3;
|
|
}
|
|
}
|
|
|
|
r = buf_used;
|
|
|
|
err3:
|
|
in->ops.dsi->set_max_rx_packet_size(in, ddata->channel, 1);
|
|
err2:
|
|
in->ops.dsi->bus_unlock(in);
|
|
err1:
|
|
mutex_unlock(&ddata->lock);
|
|
return r;
|
|
}
|
|
|
|
static void dsicm_ulps_work(struct work_struct *work)
|
|
{
|
|
struct panel_drv_data *ddata = container_of(work, struct panel_drv_data,
|
|
ulps_work.work);
|
|
struct omap_dss_device *dssdev = &ddata->dssdev;
|
|
struct omap_dss_device *in = ddata->in;
|
|
|
|
mutex_lock(&ddata->lock);
|
|
|
|
if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE || !ddata->enabled) {
|
|
mutex_unlock(&ddata->lock);
|
|
return;
|
|
}
|
|
|
|
in->ops.dsi->bus_lock(in);
|
|
|
|
dsicm_enter_ulps(ddata);
|
|
|
|
in->ops.dsi->bus_unlock(in);
|
|
mutex_unlock(&ddata->lock);
|
|
}
|
|
|
|
static struct omap_dss_driver dsicm_ops = {
|
|
.connect = dsicm_connect,
|
|
.disconnect = dsicm_disconnect,
|
|
|
|
.enable = dsicm_enable,
|
|
.disable = dsicm_disable,
|
|
|
|
.update = dsicm_update,
|
|
.sync = dsicm_sync,
|
|
|
|
.get_resolution = dsicm_get_resolution,
|
|
.get_recommended_bpp = omapdss_default_get_recommended_bpp,
|
|
|
|
.enable_te = dsicm_enable_te,
|
|
.get_te = dsicm_get_te,
|
|
|
|
.memory_read = dsicm_memory_read,
|
|
};
|
|
|
|
static int dsicm_probe_of(struct platform_device *pdev)
|
|
{
|
|
struct device_node *node = pdev->dev.of_node;
|
|
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
|
|
struct omap_dss_device *in;
|
|
int gpio;
|
|
|
|
gpio = of_get_named_gpio(node, "reset-gpios", 0);
|
|
if (!gpio_is_valid(gpio)) {
|
|
dev_err(&pdev->dev, "failed to parse reset gpio\n");
|
|
return gpio;
|
|
}
|
|
ddata->reset_gpio = gpio;
|
|
|
|
gpio = of_get_named_gpio(node, "te-gpios", 0);
|
|
if (gpio_is_valid(gpio) || gpio == -ENOENT) {
|
|
ddata->ext_te_gpio = gpio;
|
|
} else {
|
|
dev_err(&pdev->dev, "failed to parse TE gpio\n");
|
|
return gpio;
|
|
}
|
|
|
|
in = omapdss_of_find_source_for_first_ep(node);
|
|
if (IS_ERR(in)) {
|
|
dev_err(&pdev->dev, "failed to find video source\n");
|
|
return PTR_ERR(in);
|
|
}
|
|
|
|
ddata->in = in;
|
|
|
|
/* TODO: ulps, backlight */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dsicm_probe(struct platform_device *pdev)
|
|
{
|
|
struct backlight_properties props;
|
|
struct panel_drv_data *ddata;
|
|
struct backlight_device *bldev = NULL;
|
|
struct device *dev = &pdev->dev;
|
|
struct omap_dss_device *dssdev;
|
|
int r;
|
|
|
|
dev_dbg(dev, "probe\n");
|
|
|
|
ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
|
|
if (!ddata)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, ddata);
|
|
ddata->pdev = pdev;
|
|
|
|
if (!pdev->dev.of_node)
|
|
return -ENODEV;
|
|
|
|
r = dsicm_probe_of(pdev);
|
|
if (r)
|
|
return r;
|
|
|
|
ddata->timings.hactive = 864;
|
|
ddata->timings.vactive = 480;
|
|
ddata->timings.pixelclock = 864 * 480 * 60;
|
|
|
|
dssdev = &ddata->dssdev;
|
|
dssdev->dev = dev;
|
|
dssdev->driver = &dsicm_ops;
|
|
dssdev->panel.timings = ddata->timings;
|
|
dssdev->type = OMAP_DISPLAY_TYPE_DSI;
|
|
dssdev->owner = THIS_MODULE;
|
|
|
|
dssdev->panel.dsi_pix_fmt = OMAP_DSS_DSI_FMT_RGB888;
|
|
dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE |
|
|
OMAP_DSS_DISPLAY_CAP_TEAR_ELIM;
|
|
|
|
r = omapdss_register_display(dssdev);
|
|
if (r) {
|
|
dev_err(dev, "Failed to register panel\n");
|
|
goto err_reg;
|
|
}
|
|
|
|
mutex_init(&ddata->lock);
|
|
|
|
atomic_set(&ddata->do_update, 0);
|
|
|
|
if (gpio_is_valid(ddata->reset_gpio)) {
|
|
r = devm_gpio_request_one(dev, ddata->reset_gpio,
|
|
GPIOF_OUT_INIT_LOW, "taal rst");
|
|
if (r) {
|
|
dev_err(dev, "failed to request reset gpio\n");
|
|
return r;
|
|
}
|
|
}
|
|
|
|
if (gpio_is_valid(ddata->ext_te_gpio)) {
|
|
r = devm_gpio_request_one(dev, ddata->ext_te_gpio,
|
|
GPIOF_IN, "taal irq");
|
|
if (r) {
|
|
dev_err(dev, "GPIO request failed\n");
|
|
return r;
|
|
}
|
|
|
|
r = devm_request_irq(dev, gpio_to_irq(ddata->ext_te_gpio),
|
|
dsicm_te_isr,
|
|
IRQF_TRIGGER_RISING,
|
|
"taal vsync", ddata);
|
|
|
|
if (r) {
|
|
dev_err(dev, "IRQ request failed\n");
|
|
return r;
|
|
}
|
|
|
|
INIT_DEFERRABLE_WORK(&ddata->te_timeout_work,
|
|
dsicm_te_timeout_work_callback);
|
|
|
|
dev_dbg(dev, "Using GPIO TE\n");
|
|
}
|
|
|
|
ddata->workqueue = create_singlethread_workqueue("dsicm_wq");
|
|
if (ddata->workqueue == NULL) {
|
|
dev_err(dev, "can't create workqueue\n");
|
|
return -ENOMEM;
|
|
}
|
|
INIT_DELAYED_WORK(&ddata->ulps_work, dsicm_ulps_work);
|
|
|
|
dsicm_hw_reset(ddata);
|
|
|
|
if (ddata->use_dsi_backlight) {
|
|
memset(&props, 0, sizeof(struct backlight_properties));
|
|
props.max_brightness = 255;
|
|
|
|
props.type = BACKLIGHT_RAW;
|
|
bldev = backlight_device_register(dev_name(dev),
|
|
dev, ddata, &dsicm_bl_ops, &props);
|
|
if (IS_ERR(bldev)) {
|
|
r = PTR_ERR(bldev);
|
|
goto err_bl;
|
|
}
|
|
|
|
ddata->bldev = bldev;
|
|
|
|
bldev->props.fb_blank = FB_BLANK_UNBLANK;
|
|
bldev->props.power = FB_BLANK_UNBLANK;
|
|
bldev->props.brightness = 255;
|
|
|
|
dsicm_bl_update_status(bldev);
|
|
}
|
|
|
|
r = sysfs_create_group(&dev->kobj, &dsicm_attr_group);
|
|
if (r) {
|
|
dev_err(dev, "failed to create sysfs files\n");
|
|
goto err_sysfs_create;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_sysfs_create:
|
|
backlight_device_unregister(bldev);
|
|
err_bl:
|
|
destroy_workqueue(ddata->workqueue);
|
|
err_reg:
|
|
return r;
|
|
}
|
|
|
|
static int __exit dsicm_remove(struct platform_device *pdev)
|
|
{
|
|
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
|
|
struct omap_dss_device *dssdev = &ddata->dssdev;
|
|
struct backlight_device *bldev;
|
|
|
|
dev_dbg(&pdev->dev, "remove\n");
|
|
|
|
omapdss_unregister_display(dssdev);
|
|
|
|
dsicm_disable(dssdev);
|
|
dsicm_disconnect(dssdev);
|
|
|
|
sysfs_remove_group(&pdev->dev.kobj, &dsicm_attr_group);
|
|
|
|
bldev = ddata->bldev;
|
|
if (bldev != NULL) {
|
|
bldev->props.power = FB_BLANK_POWERDOWN;
|
|
dsicm_bl_update_status(bldev);
|
|
backlight_device_unregister(bldev);
|
|
}
|
|
|
|
omap_dss_put_device(ddata->in);
|
|
|
|
dsicm_cancel_ulps_work(ddata);
|
|
destroy_workqueue(ddata->workqueue);
|
|
|
|
/* reset, to be sure that the panel is in a valid state */
|
|
dsicm_hw_reset(ddata);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id dsicm_of_match[] = {
|
|
{ .compatible = "omapdss,panel-dsi-cm", },
|
|
{},
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, dsicm_of_match);
|
|
|
|
static struct platform_driver dsicm_driver = {
|
|
.probe = dsicm_probe,
|
|
.remove = __exit_p(dsicm_remove),
|
|
.driver = {
|
|
.name = "panel-dsi-cm",
|
|
.of_match_table = dsicm_of_match,
|
|
.suppress_bind_attrs = true,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(dsicm_driver);
|
|
|
|
MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
|
|
MODULE_DESCRIPTION("Generic DSI Command Mode Panel Driver");
|
|
MODULE_LICENSE("GPL");
|