forked from Minki/linux
ab40561268
Add code for NVM support and get MAC address, complete probe method. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
216 lines
4.7 KiB
C
216 lines
4.7 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/* Copyright (c) 2018 Intel Corporation */
|
|
|
|
#include "igc_mac.h"
|
|
#include "igc_nvm.h"
|
|
|
|
/**
|
|
* igc_poll_eerd_eewr_done - Poll for EEPROM read/write completion
|
|
* @hw: pointer to the HW structure
|
|
* @ee_reg: EEPROM flag for polling
|
|
*
|
|
* Polls the EEPROM status bit for either read or write completion based
|
|
* upon the value of 'ee_reg'.
|
|
*/
|
|
static s32 igc_poll_eerd_eewr_done(struct igc_hw *hw, int ee_reg)
|
|
{
|
|
s32 ret_val = -IGC_ERR_NVM;
|
|
u32 attempts = 100000;
|
|
u32 i, reg = 0;
|
|
|
|
for (i = 0; i < attempts; i++) {
|
|
if (ee_reg == IGC_NVM_POLL_READ)
|
|
reg = rd32(IGC_EERD);
|
|
else
|
|
reg = rd32(IGC_EEWR);
|
|
|
|
if (reg & IGC_NVM_RW_REG_DONE) {
|
|
ret_val = 0;
|
|
break;
|
|
}
|
|
|
|
udelay(5);
|
|
}
|
|
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* igc_acquire_nvm - Generic request for access to EEPROM
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Set the EEPROM access request bit and wait for EEPROM access grant bit.
|
|
* Return successful if access grant bit set, else clear the request for
|
|
* EEPROM access and return -IGC_ERR_NVM (-1).
|
|
*/
|
|
s32 igc_acquire_nvm(struct igc_hw *hw)
|
|
{
|
|
s32 timeout = IGC_NVM_GRANT_ATTEMPTS;
|
|
u32 eecd = rd32(IGC_EECD);
|
|
s32 ret_val = 0;
|
|
|
|
wr32(IGC_EECD, eecd | IGC_EECD_REQ);
|
|
eecd = rd32(IGC_EECD);
|
|
|
|
while (timeout) {
|
|
if (eecd & IGC_EECD_GNT)
|
|
break;
|
|
udelay(5);
|
|
eecd = rd32(IGC_EECD);
|
|
timeout--;
|
|
}
|
|
|
|
if (!timeout) {
|
|
eecd &= ~IGC_EECD_REQ;
|
|
wr32(IGC_EECD, eecd);
|
|
hw_dbg("Could not acquire NVM grant\n");
|
|
ret_val = -IGC_ERR_NVM;
|
|
}
|
|
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* igc_release_nvm - Release exclusive access to EEPROM
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Stop any current commands to the EEPROM and clear the EEPROM request bit.
|
|
*/
|
|
void igc_release_nvm(struct igc_hw *hw)
|
|
{
|
|
u32 eecd;
|
|
|
|
eecd = rd32(IGC_EECD);
|
|
eecd &= ~IGC_EECD_REQ;
|
|
wr32(IGC_EECD, eecd);
|
|
}
|
|
|
|
/**
|
|
* igc_read_nvm_eerd - Reads EEPROM using EERD register
|
|
* @hw: pointer to the HW structure
|
|
* @offset: offset of word in the EEPROM to read
|
|
* @words: number of words to read
|
|
* @data: word read from the EEPROM
|
|
*
|
|
* Reads a 16 bit word from the EEPROM using the EERD register.
|
|
*/
|
|
s32 igc_read_nvm_eerd(struct igc_hw *hw, u16 offset, u16 words, u16 *data)
|
|
{
|
|
struct igc_nvm_info *nvm = &hw->nvm;
|
|
u32 i, eerd = 0;
|
|
s32 ret_val = 0;
|
|
|
|
/* A check for invalid values: offset too large, too many words,
|
|
* and not enough words.
|
|
*/
|
|
if (offset >= nvm->word_size || (words > (nvm->word_size - offset)) ||
|
|
words == 0) {
|
|
hw_dbg("nvm parameter(s) out of bounds\n");
|
|
ret_val = -IGC_ERR_NVM;
|
|
goto out;
|
|
}
|
|
|
|
for (i = 0; i < words; i++) {
|
|
eerd = ((offset + i) << IGC_NVM_RW_ADDR_SHIFT) +
|
|
IGC_NVM_RW_REG_START;
|
|
|
|
wr32(IGC_EERD, eerd);
|
|
ret_val = igc_poll_eerd_eewr_done(hw, IGC_NVM_POLL_READ);
|
|
if (ret_val)
|
|
break;
|
|
|
|
data[i] = (rd32(IGC_EERD) >> IGC_NVM_RW_REG_DATA);
|
|
}
|
|
|
|
out:
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* igc_read_mac_addr - Read device MAC address
|
|
* @hw: pointer to the HW structure
|
|
*/
|
|
s32 igc_read_mac_addr(struct igc_hw *hw)
|
|
{
|
|
u32 rar_high;
|
|
u32 rar_low;
|
|
u16 i;
|
|
|
|
rar_high = rd32(IGC_RAH(0));
|
|
rar_low = rd32(IGC_RAL(0));
|
|
|
|
for (i = 0; i < IGC_RAL_MAC_ADDR_LEN; i++)
|
|
hw->mac.perm_addr[i] = (u8)(rar_low >> (i * 8));
|
|
|
|
for (i = 0; i < IGC_RAH_MAC_ADDR_LEN; i++)
|
|
hw->mac.perm_addr[i + 4] = (u8)(rar_high >> (i * 8));
|
|
|
|
for (i = 0; i < ETH_ALEN; i++)
|
|
hw->mac.addr[i] = hw->mac.perm_addr[i];
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* igc_validate_nvm_checksum - Validate EEPROM checksum
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Calculates the EEPROM checksum by reading/adding each word of the EEPROM
|
|
* and then verifies that the sum of the EEPROM is equal to 0xBABA.
|
|
*/
|
|
s32 igc_validate_nvm_checksum(struct igc_hw *hw)
|
|
{
|
|
u16 checksum = 0;
|
|
u16 i, nvm_data;
|
|
s32 ret_val = 0;
|
|
|
|
for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) {
|
|
ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
|
|
if (ret_val) {
|
|
hw_dbg("NVM Read Error\n");
|
|
goto out;
|
|
}
|
|
checksum += nvm_data;
|
|
}
|
|
|
|
if (checksum != (u16)NVM_SUM) {
|
|
hw_dbg("NVM Checksum Invalid\n");
|
|
ret_val = -IGC_ERR_NVM;
|
|
goto out;
|
|
}
|
|
|
|
out:
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* igc_update_nvm_checksum - Update EEPROM checksum
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Updates the EEPROM checksum by reading/adding each word of the EEPROM
|
|
* up to the checksum. Then calculates the EEPROM checksum and writes the
|
|
* value to the EEPROM.
|
|
*/
|
|
s32 igc_update_nvm_checksum(struct igc_hw *hw)
|
|
{
|
|
u16 checksum = 0;
|
|
u16 i, nvm_data;
|
|
s32 ret_val;
|
|
|
|
for (i = 0; i < NVM_CHECKSUM_REG; i++) {
|
|
ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
|
|
if (ret_val) {
|
|
hw_dbg("NVM Read Error while updating checksum.\n");
|
|
goto out;
|
|
}
|
|
checksum += nvm_data;
|
|
}
|
|
checksum = (u16)NVM_SUM - checksum;
|
|
ret_val = hw->nvm.ops.write(hw, NVM_CHECKSUM_REG, 1, &checksum);
|
|
if (ret_val)
|
|
hw_dbg("NVM Write Error while updating checksum.\n");
|
|
|
|
out:
|
|
return ret_val;
|
|
}
|