linux/Documentation/devicetree/bindings/rtc/rtc-omap.txt
Keerthy fff51e771e ARM: dts: AM437x: Add the internal and external clock nodes for rtc
rtc can either be supplied from internal 32k clock or external crystal
generated 32k clock. Internal clock is SOC specific and the external
clock is board dependent. Adding the corresponding nodes.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 19:37:20 +02:00

34 lines
1.1 KiB
Plaintext

TI Real Time Clock
Required properties:
- compatible:
- "ti,da830-rtc" - for RTC IP used similar to that on DA8xx SoC family.
- "ti,am3352-rtc" - for RTC IP used similar to that on AM335x SoC family.
This RTC IP has special WAKE-EN Register to enable
Wakeup generation for event Alarm. It can also be
used to control an external PMIC via the
pmic_power_en pin.
- "ti,am4372-rtc" - for RTC IP used similar to that on AM437X SoC family.
- reg: Address range of rtc register set
- interrupts: rtc timer, alarm interrupts in order
- interrupt-parent: phandle for the interrupt controller
Optional properties:
- system-power-controller: whether the rtc is controlling the system power
through pmic_power_en
- clocks: Any internal or external clocks feeding in to rtc
- clock-names: Corresponding names of the clocks
Example:
rtc@1c23000 {
compatible = "ti,da830-rtc";
reg = <0x23000 0x1000>;
interrupts = <19
19>;
interrupt-parent = <&intc>;
system-power-controller;
clocks = <&clk_32k_rtc>, <&clk_32768_ck>;
clock-names = "ext-clk", "int-clk";
};