Tim Harvey 3ee12d8079 ARM: dts: ventana: add UHS-I support for Ventana boards ... UHS-I support is available on Ventana boards with micro-SD sockets depending on the board revision. To support this pinctl states for 100Mhz and 200MHz must be added as well as pinmux of the VSELECT signal. In order to support UHS-I the I/O rail of the 4-bit data bus must be switchable between 1.8V and 3.3V. By adding the no-1-8-v property, which disables UHS-I support, we allow the bootloader to be in charge of selecting which boards have this capability by removing that property if the board model/revision implement the support. Additionally we will remove NANDF_CS1 here from the nand pinmux group as the second chip-select is not used on any ventana boards and this is the pad that is used for SD3_VELECT. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>		2015-07-15 10:20:33 +08:00
..
bootp
compressed	Devicetree changes for v4.2	2015-07-01 19:40:18 -07:00
dts	ARM: dts: ventana: add UHS-I support for Ventana boards	2015-07-15 10:20:33 +08:00
.gitignore
install.sh
Makefile	kbuild: use relative path to include Makefile	2015-04-02 16:42:08 +02:00