forked from Minki/linux
f9f0da9881
The card is not necessarily being removed, but the debugfs files must be
removed when the driver is removed, otherwise they will continue to exist
after unbinding the card from the driver. e.g.
# echo "mmc1:0001" > /sys/bus/mmc/drivers/mmcblk/unbind
# cat /sys/kernel/debug/mmc1/mmc1\:0001/ext_csd
[ 173.634584] BUG: unable to handle kernel NULL pointer dereference at 0000000000000050
[ 173.643356] IP: mmc_ext_csd_open+0x5e/0x170
A complication is that the debugfs_root may have already been removed, so
check for that too.
Fixes: 627c3ccfb4
("mmc: debugfs: Move block debugfs into block module")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org # 4.14+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2906 lines
72 KiB
C
2906 lines
72 KiB
C
/*
|
|
* Block driver for media (i.e., flash cards)
|
|
*
|
|
* Copyright 2002 Hewlett-Packard Company
|
|
* Copyright 2005-2008 Pierre Ossman
|
|
*
|
|
* Use consistent with the GNU GPL is permitted,
|
|
* provided that this copyright notice is
|
|
* preserved in its entirety in all copies and derived works.
|
|
*
|
|
* HEWLETT-PACKARD COMPANY MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
|
|
* AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
|
|
* FITNESS FOR ANY PARTICULAR PURPOSE.
|
|
*
|
|
* Many thanks to Alessandro Rubini and Jonathan Corbet!
|
|
*
|
|
* Author: Andrew Christian
|
|
* 28 May 2002
|
|
*/
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/hdreg.h>
|
|
#include <linux/kdev_t.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/cdev.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/scatterlist.h>
|
|
#include <linux/string_helpers.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/capability.h>
|
|
#include <linux/compat.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/idr.h>
|
|
#include <linux/debugfs.h>
|
|
|
|
#include <linux/mmc/ioctl.h>
|
|
#include <linux/mmc/card.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/mmc/mmc.h>
|
|
#include <linux/mmc/sd.h>
|
|
|
|
#include <linux/uaccess.h>
|
|
|
|
#include "queue.h"
|
|
#include "block.h"
|
|
#include "core.h"
|
|
#include "card.h"
|
|
#include "host.h"
|
|
#include "bus.h"
|
|
#include "mmc_ops.h"
|
|
#include "quirks.h"
|
|
#include "sd_ops.h"
|
|
|
|
MODULE_ALIAS("mmc:block");
|
|
#ifdef MODULE_PARAM_PREFIX
|
|
#undef MODULE_PARAM_PREFIX
|
|
#endif
|
|
#define MODULE_PARAM_PREFIX "mmcblk."
|
|
|
|
#define MMC_BLK_TIMEOUT_MS (10 * 60 * 1000) /* 10 minute timeout */
|
|
#define MMC_SANITIZE_REQ_TIMEOUT 240000
|
|
#define MMC_EXTRACT_INDEX_FROM_ARG(x) ((x & 0x00FF0000) >> 16)
|
|
|
|
#define mmc_req_rel_wr(req) ((req->cmd_flags & REQ_FUA) && \
|
|
(rq_data_dir(req) == WRITE))
|
|
static DEFINE_MUTEX(block_mutex);
|
|
|
|
/*
|
|
* The defaults come from config options but can be overriden by module
|
|
* or bootarg options.
|
|
*/
|
|
static int perdev_minors = CONFIG_MMC_BLOCK_MINORS;
|
|
|
|
/*
|
|
* We've only got one major, so number of mmcblk devices is
|
|
* limited to (1 << 20) / number of minors per device. It is also
|
|
* limited by the MAX_DEVICES below.
|
|
*/
|
|
static int max_devices;
|
|
|
|
#define MAX_DEVICES 256
|
|
|
|
static DEFINE_IDA(mmc_blk_ida);
|
|
static DEFINE_IDA(mmc_rpmb_ida);
|
|
|
|
/*
|
|
* There is one mmc_blk_data per slot.
|
|
*/
|
|
struct mmc_blk_data {
|
|
spinlock_t lock;
|
|
struct device *parent;
|
|
struct gendisk *disk;
|
|
struct mmc_queue queue;
|
|
struct list_head part;
|
|
struct list_head rpmbs;
|
|
|
|
unsigned int flags;
|
|
#define MMC_BLK_CMD23 (1 << 0) /* Can do SET_BLOCK_COUNT for multiblock */
|
|
#define MMC_BLK_REL_WR (1 << 1) /* MMC Reliable write support */
|
|
|
|
unsigned int usage;
|
|
unsigned int read_only;
|
|
unsigned int part_type;
|
|
unsigned int reset_done;
|
|
#define MMC_BLK_READ BIT(0)
|
|
#define MMC_BLK_WRITE BIT(1)
|
|
#define MMC_BLK_DISCARD BIT(2)
|
|
#define MMC_BLK_SECDISCARD BIT(3)
|
|
|
|
/*
|
|
* Only set in main mmc_blk_data associated
|
|
* with mmc_card with dev_set_drvdata, and keeps
|
|
* track of the current selected device partition.
|
|
*/
|
|
unsigned int part_curr;
|
|
struct device_attribute force_ro;
|
|
struct device_attribute power_ro_lock;
|
|
int area_type;
|
|
|
|
/* debugfs files (only in main mmc_blk_data) */
|
|
struct dentry *status_dentry;
|
|
struct dentry *ext_csd_dentry;
|
|
};
|
|
|
|
/* Device type for RPMB character devices */
|
|
static dev_t mmc_rpmb_devt;
|
|
|
|
/* Bus type for RPMB character devices */
|
|
static struct bus_type mmc_rpmb_bus_type = {
|
|
.name = "mmc_rpmb",
|
|
};
|
|
|
|
/**
|
|
* struct mmc_rpmb_data - special RPMB device type for these areas
|
|
* @dev: the device for the RPMB area
|
|
* @chrdev: character device for the RPMB area
|
|
* @id: unique device ID number
|
|
* @part_index: partition index (0 on first)
|
|
* @md: parent MMC block device
|
|
* @node: list item, so we can put this device on a list
|
|
*/
|
|
struct mmc_rpmb_data {
|
|
struct device dev;
|
|
struct cdev chrdev;
|
|
int id;
|
|
unsigned int part_index;
|
|
struct mmc_blk_data *md;
|
|
struct list_head node;
|
|
};
|
|
|
|
static DEFINE_MUTEX(open_lock);
|
|
|
|
module_param(perdev_minors, int, 0444);
|
|
MODULE_PARM_DESC(perdev_minors, "Minors numbers to allocate per device");
|
|
|
|
static inline int mmc_blk_part_switch(struct mmc_card *card,
|
|
unsigned int part_type);
|
|
|
|
static struct mmc_blk_data *mmc_blk_get(struct gendisk *disk)
|
|
{
|
|
struct mmc_blk_data *md;
|
|
|
|
mutex_lock(&open_lock);
|
|
md = disk->private_data;
|
|
if (md && md->usage == 0)
|
|
md = NULL;
|
|
if (md)
|
|
md->usage++;
|
|
mutex_unlock(&open_lock);
|
|
|
|
return md;
|
|
}
|
|
|
|
static inline int mmc_get_devidx(struct gendisk *disk)
|
|
{
|
|
int devidx = disk->first_minor / perdev_minors;
|
|
return devidx;
|
|
}
|
|
|
|
static void mmc_blk_put(struct mmc_blk_data *md)
|
|
{
|
|
mutex_lock(&open_lock);
|
|
md->usage--;
|
|
if (md->usage == 0) {
|
|
int devidx = mmc_get_devidx(md->disk);
|
|
blk_cleanup_queue(md->queue.queue);
|
|
ida_simple_remove(&mmc_blk_ida, devidx);
|
|
put_disk(md->disk);
|
|
kfree(md);
|
|
}
|
|
mutex_unlock(&open_lock);
|
|
}
|
|
|
|
static ssize_t power_ro_lock_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
int ret;
|
|
struct mmc_blk_data *md = mmc_blk_get(dev_to_disk(dev));
|
|
struct mmc_card *card = md->queue.card;
|
|
int locked = 0;
|
|
|
|
if (card->ext_csd.boot_ro_lock & EXT_CSD_BOOT_WP_B_PERM_WP_EN)
|
|
locked = 2;
|
|
else if (card->ext_csd.boot_ro_lock & EXT_CSD_BOOT_WP_B_PWR_WP_EN)
|
|
locked = 1;
|
|
|
|
ret = snprintf(buf, PAGE_SIZE, "%d\n", locked);
|
|
|
|
mmc_blk_put(md);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t power_ro_lock_store(struct device *dev,
|
|
struct device_attribute *attr, const char *buf, size_t count)
|
|
{
|
|
int ret;
|
|
struct mmc_blk_data *md, *part_md;
|
|
struct mmc_queue *mq;
|
|
struct request *req;
|
|
unsigned long set;
|
|
|
|
if (kstrtoul(buf, 0, &set))
|
|
return -EINVAL;
|
|
|
|
if (set != 1)
|
|
return count;
|
|
|
|
md = mmc_blk_get(dev_to_disk(dev));
|
|
mq = &md->queue;
|
|
|
|
/* Dispatch locking to the block layer */
|
|
req = blk_get_request(mq->queue, REQ_OP_DRV_OUT, __GFP_RECLAIM);
|
|
if (IS_ERR(req)) {
|
|
count = PTR_ERR(req);
|
|
goto out_put;
|
|
}
|
|
req_to_mmc_queue_req(req)->drv_op = MMC_DRV_OP_BOOT_WP;
|
|
blk_execute_rq(mq->queue, NULL, req, 0);
|
|
ret = req_to_mmc_queue_req(req)->drv_op_result;
|
|
blk_put_request(req);
|
|
|
|
if (!ret) {
|
|
pr_info("%s: Locking boot partition ro until next power on\n",
|
|
md->disk->disk_name);
|
|
set_disk_ro(md->disk, 1);
|
|
|
|
list_for_each_entry(part_md, &md->part, part)
|
|
if (part_md->area_type == MMC_BLK_DATA_AREA_BOOT) {
|
|
pr_info("%s: Locking boot partition ro until next power on\n", part_md->disk->disk_name);
|
|
set_disk_ro(part_md->disk, 1);
|
|
}
|
|
}
|
|
out_put:
|
|
mmc_blk_put(md);
|
|
return count;
|
|
}
|
|
|
|
static ssize_t force_ro_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
int ret;
|
|
struct mmc_blk_data *md = mmc_blk_get(dev_to_disk(dev));
|
|
|
|
ret = snprintf(buf, PAGE_SIZE, "%d\n",
|
|
get_disk_ro(dev_to_disk(dev)) ^
|
|
md->read_only);
|
|
mmc_blk_put(md);
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t force_ro_store(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
int ret;
|
|
char *end;
|
|
struct mmc_blk_data *md = mmc_blk_get(dev_to_disk(dev));
|
|
unsigned long set = simple_strtoul(buf, &end, 0);
|
|
if (end == buf) {
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
set_disk_ro(dev_to_disk(dev), set || md->read_only);
|
|
ret = count;
|
|
out:
|
|
mmc_blk_put(md);
|
|
return ret;
|
|
}
|
|
|
|
static int mmc_blk_open(struct block_device *bdev, fmode_t mode)
|
|
{
|
|
struct mmc_blk_data *md = mmc_blk_get(bdev->bd_disk);
|
|
int ret = -ENXIO;
|
|
|
|
mutex_lock(&block_mutex);
|
|
if (md) {
|
|
if (md->usage == 2)
|
|
check_disk_change(bdev);
|
|
ret = 0;
|
|
|
|
if ((mode & FMODE_WRITE) && md->read_only) {
|
|
mmc_blk_put(md);
|
|
ret = -EROFS;
|
|
}
|
|
}
|
|
mutex_unlock(&block_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void mmc_blk_release(struct gendisk *disk, fmode_t mode)
|
|
{
|
|
struct mmc_blk_data *md = disk->private_data;
|
|
|
|
mutex_lock(&block_mutex);
|
|
mmc_blk_put(md);
|
|
mutex_unlock(&block_mutex);
|
|
}
|
|
|
|
static int
|
|
mmc_blk_getgeo(struct block_device *bdev, struct hd_geometry *geo)
|
|
{
|
|
geo->cylinders = get_capacity(bdev->bd_disk) / (4 * 16);
|
|
geo->heads = 4;
|
|
geo->sectors = 16;
|
|
return 0;
|
|
}
|
|
|
|
struct mmc_blk_ioc_data {
|
|
struct mmc_ioc_cmd ic;
|
|
unsigned char *buf;
|
|
u64 buf_bytes;
|
|
struct mmc_rpmb_data *rpmb;
|
|
};
|
|
|
|
static struct mmc_blk_ioc_data *mmc_blk_ioctl_copy_from_user(
|
|
struct mmc_ioc_cmd __user *user)
|
|
{
|
|
struct mmc_blk_ioc_data *idata;
|
|
int err;
|
|
|
|
idata = kmalloc(sizeof(*idata), GFP_KERNEL);
|
|
if (!idata) {
|
|
err = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
if (copy_from_user(&idata->ic, user, sizeof(idata->ic))) {
|
|
err = -EFAULT;
|
|
goto idata_err;
|
|
}
|
|
|
|
idata->buf_bytes = (u64) idata->ic.blksz * idata->ic.blocks;
|
|
if (idata->buf_bytes > MMC_IOC_MAX_BYTES) {
|
|
err = -EOVERFLOW;
|
|
goto idata_err;
|
|
}
|
|
|
|
if (!idata->buf_bytes) {
|
|
idata->buf = NULL;
|
|
return idata;
|
|
}
|
|
|
|
idata->buf = kmalloc(idata->buf_bytes, GFP_KERNEL);
|
|
if (!idata->buf) {
|
|
err = -ENOMEM;
|
|
goto idata_err;
|
|
}
|
|
|
|
if (copy_from_user(idata->buf, (void __user *)(unsigned long)
|
|
idata->ic.data_ptr, idata->buf_bytes)) {
|
|
err = -EFAULT;
|
|
goto copy_err;
|
|
}
|
|
|
|
return idata;
|
|
|
|
copy_err:
|
|
kfree(idata->buf);
|
|
idata_err:
|
|
kfree(idata);
|
|
out:
|
|
return ERR_PTR(err);
|
|
}
|
|
|
|
static int mmc_blk_ioctl_copy_to_user(struct mmc_ioc_cmd __user *ic_ptr,
|
|
struct mmc_blk_ioc_data *idata)
|
|
{
|
|
struct mmc_ioc_cmd *ic = &idata->ic;
|
|
|
|
if (copy_to_user(&(ic_ptr->response), ic->response,
|
|
sizeof(ic->response)))
|
|
return -EFAULT;
|
|
|
|
if (!idata->ic.write_flag) {
|
|
if (copy_to_user((void __user *)(unsigned long)ic->data_ptr,
|
|
idata->buf, idata->buf_bytes))
|
|
return -EFAULT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ioctl_rpmb_card_status_poll(struct mmc_card *card, u32 *status,
|
|
u32 retries_max)
|
|
{
|
|
int err;
|
|
u32 retry_count = 0;
|
|
|
|
if (!status || !retries_max)
|
|
return -EINVAL;
|
|
|
|
do {
|
|
err = __mmc_send_status(card, status, 5);
|
|
if (err)
|
|
break;
|
|
|
|
if (!R1_STATUS(*status) &&
|
|
(R1_CURRENT_STATE(*status) != R1_STATE_PRG))
|
|
break; /* RPMB programming operation complete */
|
|
|
|
/*
|
|
* Rechedule to give the MMC device a chance to continue
|
|
* processing the previous command without being polled too
|
|
* frequently.
|
|
*/
|
|
usleep_range(1000, 5000);
|
|
} while (++retry_count < retries_max);
|
|
|
|
if (retry_count == retries_max)
|
|
err = -EPERM;
|
|
|
|
return err;
|
|
}
|
|
|
|
static int ioctl_do_sanitize(struct mmc_card *card)
|
|
{
|
|
int err;
|
|
|
|
if (!mmc_can_sanitize(card)) {
|
|
pr_warn("%s: %s - SANITIZE is not supported\n",
|
|
mmc_hostname(card->host), __func__);
|
|
err = -EOPNOTSUPP;
|
|
goto out;
|
|
}
|
|
|
|
pr_debug("%s: %s - SANITIZE IN PROGRESS...\n",
|
|
mmc_hostname(card->host), __func__);
|
|
|
|
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
|
|
EXT_CSD_SANITIZE_START, 1,
|
|
MMC_SANITIZE_REQ_TIMEOUT);
|
|
|
|
if (err)
|
|
pr_err("%s: %s - EXT_CSD_SANITIZE_START failed. err=%d\n",
|
|
mmc_hostname(card->host), __func__, err);
|
|
|
|
pr_debug("%s: %s - SANITIZE COMPLETED\n", mmc_hostname(card->host),
|
|
__func__);
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
|
|
struct mmc_blk_ioc_data *idata)
|
|
{
|
|
struct mmc_command cmd = {};
|
|
struct mmc_data data = {};
|
|
struct mmc_request mrq = {};
|
|
struct scatterlist sg;
|
|
int err;
|
|
unsigned int target_part;
|
|
u32 status = 0;
|
|
|
|
if (!card || !md || !idata)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* The RPMB accesses comes in from the character device, so we
|
|
* need to target these explicitly. Else we just target the
|
|
* partition type for the block device the ioctl() was issued
|
|
* on.
|
|
*/
|
|
if (idata->rpmb) {
|
|
/* Support multiple RPMB partitions */
|
|
target_part = idata->rpmb->part_index;
|
|
target_part |= EXT_CSD_PART_CONFIG_ACC_RPMB;
|
|
} else {
|
|
target_part = md->part_type;
|
|
}
|
|
|
|
cmd.opcode = idata->ic.opcode;
|
|
cmd.arg = idata->ic.arg;
|
|
cmd.flags = idata->ic.flags;
|
|
|
|
if (idata->buf_bytes) {
|
|
data.sg = &sg;
|
|
data.sg_len = 1;
|
|
data.blksz = idata->ic.blksz;
|
|
data.blocks = idata->ic.blocks;
|
|
|
|
sg_init_one(data.sg, idata->buf, idata->buf_bytes);
|
|
|
|
if (idata->ic.write_flag)
|
|
data.flags = MMC_DATA_WRITE;
|
|
else
|
|
data.flags = MMC_DATA_READ;
|
|
|
|
/* data.flags must already be set before doing this. */
|
|
mmc_set_data_timeout(&data, card);
|
|
|
|
/* Allow overriding the timeout_ns for empirical tuning. */
|
|
if (idata->ic.data_timeout_ns)
|
|
data.timeout_ns = idata->ic.data_timeout_ns;
|
|
|
|
if ((cmd.flags & MMC_RSP_R1B) == MMC_RSP_R1B) {
|
|
/*
|
|
* Pretend this is a data transfer and rely on the
|
|
* host driver to compute timeout. When all host
|
|
* drivers support cmd.cmd_timeout for R1B, this
|
|
* can be changed to:
|
|
*
|
|
* mrq.data = NULL;
|
|
* cmd.cmd_timeout = idata->ic.cmd_timeout_ms;
|
|
*/
|
|
data.timeout_ns = idata->ic.cmd_timeout_ms * 1000000;
|
|
}
|
|
|
|
mrq.data = &data;
|
|
}
|
|
|
|
mrq.cmd = &cmd;
|
|
|
|
err = mmc_blk_part_switch(card, target_part);
|
|
if (err)
|
|
return err;
|
|
|
|
if (idata->ic.is_acmd) {
|
|
err = mmc_app_cmd(card->host, card);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
if (idata->rpmb) {
|
|
err = mmc_set_blockcount(card, data.blocks,
|
|
idata->ic.write_flag & (1 << 31));
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
if ((MMC_EXTRACT_INDEX_FROM_ARG(cmd.arg) == EXT_CSD_SANITIZE_START) &&
|
|
(cmd.opcode == MMC_SWITCH)) {
|
|
err = ioctl_do_sanitize(card);
|
|
|
|
if (err)
|
|
pr_err("%s: ioctl_do_sanitize() failed. err = %d",
|
|
__func__, err);
|
|
|
|
return err;
|
|
}
|
|
|
|
mmc_wait_for_req(card->host, &mrq);
|
|
|
|
if (cmd.error) {
|
|
dev_err(mmc_dev(card->host), "%s: cmd error %d\n",
|
|
__func__, cmd.error);
|
|
return cmd.error;
|
|
}
|
|
if (data.error) {
|
|
dev_err(mmc_dev(card->host), "%s: data error %d\n",
|
|
__func__, data.error);
|
|
return data.error;
|
|
}
|
|
|
|
/*
|
|
* According to the SD specs, some commands require a delay after
|
|
* issuing the command.
|
|
*/
|
|
if (idata->ic.postsleep_min_us)
|
|
usleep_range(idata->ic.postsleep_min_us, idata->ic.postsleep_max_us);
|
|
|
|
memcpy(&(idata->ic.response), cmd.resp, sizeof(cmd.resp));
|
|
|
|
if (idata->rpmb) {
|
|
/*
|
|
* Ensure RPMB command has completed by polling CMD13
|
|
* "Send Status".
|
|
*/
|
|
err = ioctl_rpmb_card_status_poll(card, &status, 5);
|
|
if (err)
|
|
dev_err(mmc_dev(card->host),
|
|
"%s: Card Status=0x%08X, error %d\n",
|
|
__func__, status, err);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static int mmc_blk_ioctl_cmd(struct mmc_blk_data *md,
|
|
struct mmc_ioc_cmd __user *ic_ptr,
|
|
struct mmc_rpmb_data *rpmb)
|
|
{
|
|
struct mmc_blk_ioc_data *idata;
|
|
struct mmc_blk_ioc_data *idatas[1];
|
|
struct mmc_queue *mq;
|
|
struct mmc_card *card;
|
|
int err = 0, ioc_err = 0;
|
|
struct request *req;
|
|
|
|
idata = mmc_blk_ioctl_copy_from_user(ic_ptr);
|
|
if (IS_ERR(idata))
|
|
return PTR_ERR(idata);
|
|
/* This will be NULL on non-RPMB ioctl():s */
|
|
idata->rpmb = rpmb;
|
|
|
|
card = md->queue.card;
|
|
if (IS_ERR(card)) {
|
|
err = PTR_ERR(card);
|
|
goto cmd_done;
|
|
}
|
|
|
|
/*
|
|
* Dispatch the ioctl() into the block request queue.
|
|
*/
|
|
mq = &md->queue;
|
|
req = blk_get_request(mq->queue,
|
|
idata->ic.write_flag ? REQ_OP_DRV_OUT : REQ_OP_DRV_IN,
|
|
__GFP_RECLAIM);
|
|
if (IS_ERR(req)) {
|
|
err = PTR_ERR(req);
|
|
goto cmd_done;
|
|
}
|
|
idatas[0] = idata;
|
|
req_to_mmc_queue_req(req)->drv_op =
|
|
rpmb ? MMC_DRV_OP_IOCTL_RPMB : MMC_DRV_OP_IOCTL;
|
|
req_to_mmc_queue_req(req)->drv_op_data = idatas;
|
|
req_to_mmc_queue_req(req)->ioc_count = 1;
|
|
blk_execute_rq(mq->queue, NULL, req, 0);
|
|
ioc_err = req_to_mmc_queue_req(req)->drv_op_result;
|
|
err = mmc_blk_ioctl_copy_to_user(ic_ptr, idata);
|
|
blk_put_request(req);
|
|
|
|
cmd_done:
|
|
kfree(idata->buf);
|
|
kfree(idata);
|
|
return ioc_err ? ioc_err : err;
|
|
}
|
|
|
|
static int mmc_blk_ioctl_multi_cmd(struct mmc_blk_data *md,
|
|
struct mmc_ioc_multi_cmd __user *user,
|
|
struct mmc_rpmb_data *rpmb)
|
|
{
|
|
struct mmc_blk_ioc_data **idata = NULL;
|
|
struct mmc_ioc_cmd __user *cmds = user->cmds;
|
|
struct mmc_card *card;
|
|
struct mmc_queue *mq;
|
|
int i, err = 0, ioc_err = 0;
|
|
__u64 num_of_cmds;
|
|
struct request *req;
|
|
|
|
if (copy_from_user(&num_of_cmds, &user->num_of_cmds,
|
|
sizeof(num_of_cmds)))
|
|
return -EFAULT;
|
|
|
|
if (!num_of_cmds)
|
|
return 0;
|
|
|
|
if (num_of_cmds > MMC_IOC_MAX_CMDS)
|
|
return -EINVAL;
|
|
|
|
idata = kcalloc(num_of_cmds, sizeof(*idata), GFP_KERNEL);
|
|
if (!idata)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < num_of_cmds; i++) {
|
|
idata[i] = mmc_blk_ioctl_copy_from_user(&cmds[i]);
|
|
if (IS_ERR(idata[i])) {
|
|
err = PTR_ERR(idata[i]);
|
|
num_of_cmds = i;
|
|
goto cmd_err;
|
|
}
|
|
/* This will be NULL on non-RPMB ioctl():s */
|
|
idata[i]->rpmb = rpmb;
|
|
}
|
|
|
|
card = md->queue.card;
|
|
if (IS_ERR(card)) {
|
|
err = PTR_ERR(card);
|
|
goto cmd_err;
|
|
}
|
|
|
|
|
|
/*
|
|
* Dispatch the ioctl()s into the block request queue.
|
|
*/
|
|
mq = &md->queue;
|
|
req = blk_get_request(mq->queue,
|
|
idata[0]->ic.write_flag ? REQ_OP_DRV_OUT : REQ_OP_DRV_IN,
|
|
__GFP_RECLAIM);
|
|
if (IS_ERR(req)) {
|
|
err = PTR_ERR(req);
|
|
goto cmd_err;
|
|
}
|
|
req_to_mmc_queue_req(req)->drv_op =
|
|
rpmb ? MMC_DRV_OP_IOCTL_RPMB : MMC_DRV_OP_IOCTL;
|
|
req_to_mmc_queue_req(req)->drv_op_data = idata;
|
|
req_to_mmc_queue_req(req)->ioc_count = num_of_cmds;
|
|
blk_execute_rq(mq->queue, NULL, req, 0);
|
|
ioc_err = req_to_mmc_queue_req(req)->drv_op_result;
|
|
|
|
/* copy to user if data and response */
|
|
for (i = 0; i < num_of_cmds && !err; i++)
|
|
err = mmc_blk_ioctl_copy_to_user(&cmds[i], idata[i]);
|
|
|
|
blk_put_request(req);
|
|
|
|
cmd_err:
|
|
for (i = 0; i < num_of_cmds; i++) {
|
|
kfree(idata[i]->buf);
|
|
kfree(idata[i]);
|
|
}
|
|
kfree(idata);
|
|
return ioc_err ? ioc_err : err;
|
|
}
|
|
|
|
static int mmc_blk_check_blkdev(struct block_device *bdev)
|
|
{
|
|
/*
|
|
* The caller must have CAP_SYS_RAWIO, and must be calling this on the
|
|
* whole block device, not on a partition. This prevents overspray
|
|
* between sibling partitions.
|
|
*/
|
|
if ((!capable(CAP_SYS_RAWIO)) || (bdev != bdev->bd_contains))
|
|
return -EPERM;
|
|
return 0;
|
|
}
|
|
|
|
static int mmc_blk_ioctl(struct block_device *bdev, fmode_t mode,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
struct mmc_blk_data *md;
|
|
int ret;
|
|
|
|
switch (cmd) {
|
|
case MMC_IOC_CMD:
|
|
ret = mmc_blk_check_blkdev(bdev);
|
|
if (ret)
|
|
return ret;
|
|
md = mmc_blk_get(bdev->bd_disk);
|
|
if (!md)
|
|
return -EINVAL;
|
|
ret = mmc_blk_ioctl_cmd(md,
|
|
(struct mmc_ioc_cmd __user *)arg,
|
|
NULL);
|
|
mmc_blk_put(md);
|
|
return ret;
|
|
case MMC_IOC_MULTI_CMD:
|
|
ret = mmc_blk_check_blkdev(bdev);
|
|
if (ret)
|
|
return ret;
|
|
md = mmc_blk_get(bdev->bd_disk);
|
|
if (!md)
|
|
return -EINVAL;
|
|
ret = mmc_blk_ioctl_multi_cmd(md,
|
|
(struct mmc_ioc_multi_cmd __user *)arg,
|
|
NULL);
|
|
mmc_blk_put(md);
|
|
return ret;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_COMPAT
|
|
static int mmc_blk_compat_ioctl(struct block_device *bdev, fmode_t mode,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
return mmc_blk_ioctl(bdev, mode, cmd, (unsigned long) compat_ptr(arg));
|
|
}
|
|
#endif
|
|
|
|
static const struct block_device_operations mmc_bdops = {
|
|
.open = mmc_blk_open,
|
|
.release = mmc_blk_release,
|
|
.getgeo = mmc_blk_getgeo,
|
|
.owner = THIS_MODULE,
|
|
.ioctl = mmc_blk_ioctl,
|
|
#ifdef CONFIG_COMPAT
|
|
.compat_ioctl = mmc_blk_compat_ioctl,
|
|
#endif
|
|
};
|
|
|
|
static int mmc_blk_part_switch_pre(struct mmc_card *card,
|
|
unsigned int part_type)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (part_type == EXT_CSD_PART_CONFIG_ACC_RPMB) {
|
|
if (card->ext_csd.cmdq_en) {
|
|
ret = mmc_cmdq_disable(card);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
mmc_retune_pause(card->host);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mmc_blk_part_switch_post(struct mmc_card *card,
|
|
unsigned int part_type)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (part_type == EXT_CSD_PART_CONFIG_ACC_RPMB) {
|
|
mmc_retune_unpause(card->host);
|
|
if (card->reenable_cmdq && !card->ext_csd.cmdq_en)
|
|
ret = mmc_cmdq_enable(card);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static inline int mmc_blk_part_switch(struct mmc_card *card,
|
|
unsigned int part_type)
|
|
{
|
|
int ret = 0;
|
|
struct mmc_blk_data *main_md = dev_get_drvdata(&card->dev);
|
|
|
|
if (main_md->part_curr == part_type)
|
|
return 0;
|
|
|
|
if (mmc_card_mmc(card)) {
|
|
u8 part_config = card->ext_csd.part_config;
|
|
|
|
ret = mmc_blk_part_switch_pre(card, part_type);
|
|
if (ret)
|
|
return ret;
|
|
|
|
part_config &= ~EXT_CSD_PART_CONFIG_ACC_MASK;
|
|
part_config |= part_type;
|
|
|
|
ret = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
|
|
EXT_CSD_PART_CONFIG, part_config,
|
|
card->ext_csd.part_time);
|
|
if (ret) {
|
|
mmc_blk_part_switch_post(card, part_type);
|
|
return ret;
|
|
}
|
|
|
|
card->ext_csd.part_config = part_config;
|
|
|
|
ret = mmc_blk_part_switch_post(card, main_md->part_curr);
|
|
}
|
|
|
|
main_md->part_curr = part_type;
|
|
return ret;
|
|
}
|
|
|
|
static int mmc_sd_num_wr_blocks(struct mmc_card *card, u32 *written_blocks)
|
|
{
|
|
int err;
|
|
u32 result;
|
|
__be32 *blocks;
|
|
|
|
struct mmc_request mrq = {};
|
|
struct mmc_command cmd = {};
|
|
struct mmc_data data = {};
|
|
|
|
struct scatterlist sg;
|
|
|
|
cmd.opcode = MMC_APP_CMD;
|
|
cmd.arg = card->rca << 16;
|
|
cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
|
|
|
|
err = mmc_wait_for_cmd(card->host, &cmd, 0);
|
|
if (err)
|
|
return err;
|
|
if (!mmc_host_is_spi(card->host) && !(cmd.resp[0] & R1_APP_CMD))
|
|
return -EIO;
|
|
|
|
memset(&cmd, 0, sizeof(struct mmc_command));
|
|
|
|
cmd.opcode = SD_APP_SEND_NUM_WR_BLKS;
|
|
cmd.arg = 0;
|
|
cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
|
|
|
|
data.blksz = 4;
|
|
data.blocks = 1;
|
|
data.flags = MMC_DATA_READ;
|
|
data.sg = &sg;
|
|
data.sg_len = 1;
|
|
mmc_set_data_timeout(&data, card);
|
|
|
|
mrq.cmd = &cmd;
|
|
mrq.data = &data;
|
|
|
|
blocks = kmalloc(4, GFP_KERNEL);
|
|
if (!blocks)
|
|
return -ENOMEM;
|
|
|
|
sg_init_one(&sg, blocks, 4);
|
|
|
|
mmc_wait_for_req(card->host, &mrq);
|
|
|
|
result = ntohl(*blocks);
|
|
kfree(blocks);
|
|
|
|
if (cmd.error || data.error)
|
|
return -EIO;
|
|
|
|
*written_blocks = result;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int card_busy_detect(struct mmc_card *card, unsigned int timeout_ms,
|
|
bool hw_busy_detect, struct request *req, bool *gen_err)
|
|
{
|
|
unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms);
|
|
int err = 0;
|
|
u32 status;
|
|
|
|
do {
|
|
err = __mmc_send_status(card, &status, 5);
|
|
if (err) {
|
|
pr_err("%s: error %d requesting status\n",
|
|
req->rq_disk->disk_name, err);
|
|
return err;
|
|
}
|
|
|
|
if (status & R1_ERROR) {
|
|
pr_err("%s: %s: error sending status cmd, status %#x\n",
|
|
req->rq_disk->disk_name, __func__, status);
|
|
*gen_err = true;
|
|
}
|
|
|
|
/* We may rely on the host hw to handle busy detection.*/
|
|
if ((card->host->caps & MMC_CAP_WAIT_WHILE_BUSY) &&
|
|
hw_busy_detect)
|
|
break;
|
|
|
|
/*
|
|
* Timeout if the device never becomes ready for data and never
|
|
* leaves the program state.
|
|
*/
|
|
if (time_after(jiffies, timeout)) {
|
|
pr_err("%s: Card stuck in programming state! %s %s\n",
|
|
mmc_hostname(card->host),
|
|
req->rq_disk->disk_name, __func__);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
/*
|
|
* Some cards mishandle the status bits,
|
|
* so make sure to check both the busy
|
|
* indication and the card state.
|
|
*/
|
|
} while (!(status & R1_READY_FOR_DATA) ||
|
|
(R1_CURRENT_STATE(status) == R1_STATE_PRG));
|
|
|
|
return err;
|
|
}
|
|
|
|
static int send_stop(struct mmc_card *card, unsigned int timeout_ms,
|
|
struct request *req, bool *gen_err, u32 *stop_status)
|
|
{
|
|
struct mmc_host *host = card->host;
|
|
struct mmc_command cmd = {};
|
|
int err;
|
|
bool use_r1b_resp = rq_data_dir(req) == WRITE;
|
|
|
|
/*
|
|
* Normally we use R1B responses for WRITE, but in cases where the host
|
|
* has specified a max_busy_timeout we need to validate it. A failure
|
|
* means we need to prevent the host from doing hw busy detection, which
|
|
* is done by converting to a R1 response instead.
|
|
*/
|
|
if (host->max_busy_timeout && (timeout_ms > host->max_busy_timeout))
|
|
use_r1b_resp = false;
|
|
|
|
cmd.opcode = MMC_STOP_TRANSMISSION;
|
|
if (use_r1b_resp) {
|
|
cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
|
|
cmd.busy_timeout = timeout_ms;
|
|
} else {
|
|
cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
|
|
}
|
|
|
|
err = mmc_wait_for_cmd(host, &cmd, 5);
|
|
if (err)
|
|
return err;
|
|
|
|
*stop_status = cmd.resp[0];
|
|
|
|
/* No need to check card status in case of READ. */
|
|
if (rq_data_dir(req) == READ)
|
|
return 0;
|
|
|
|
if (!mmc_host_is_spi(host) &&
|
|
(*stop_status & R1_ERROR)) {
|
|
pr_err("%s: %s: general error sending stop command, resp %#x\n",
|
|
req->rq_disk->disk_name, __func__, *stop_status);
|
|
*gen_err = true;
|
|
}
|
|
|
|
return card_busy_detect(card, timeout_ms, use_r1b_resp, req, gen_err);
|
|
}
|
|
|
|
#define ERR_NOMEDIUM 3
|
|
#define ERR_RETRY 2
|
|
#define ERR_ABORT 1
|
|
#define ERR_CONTINUE 0
|
|
|
|
static int mmc_blk_cmd_error(struct request *req, const char *name, int error,
|
|
bool status_valid, u32 status)
|
|
{
|
|
switch (error) {
|
|
case -EILSEQ:
|
|
/* response crc error, retry the r/w cmd */
|
|
pr_err("%s: %s sending %s command, card status %#x\n",
|
|
req->rq_disk->disk_name, "response CRC error",
|
|
name, status);
|
|
return ERR_RETRY;
|
|
|
|
case -ETIMEDOUT:
|
|
pr_err("%s: %s sending %s command, card status %#x\n",
|
|
req->rq_disk->disk_name, "timed out", name, status);
|
|
|
|
/* If the status cmd initially failed, retry the r/w cmd */
|
|
if (!status_valid) {
|
|
pr_err("%s: status not valid, retrying timeout\n",
|
|
req->rq_disk->disk_name);
|
|
return ERR_RETRY;
|
|
}
|
|
|
|
/*
|
|
* If it was a r/w cmd crc error, or illegal command
|
|
* (eg, issued in wrong state) then retry - we should
|
|
* have corrected the state problem above.
|
|
*/
|
|
if (status & (R1_COM_CRC_ERROR | R1_ILLEGAL_COMMAND)) {
|
|
pr_err("%s: command error, retrying timeout\n",
|
|
req->rq_disk->disk_name);
|
|
return ERR_RETRY;
|
|
}
|
|
|
|
/* Otherwise abort the command */
|
|
return ERR_ABORT;
|
|
|
|
default:
|
|
/* We don't understand the error code the driver gave us */
|
|
pr_err("%s: unknown error %d sending read/write command, card status %#x\n",
|
|
req->rq_disk->disk_name, error, status);
|
|
return ERR_ABORT;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Initial r/w and stop cmd error recovery.
|
|
* We don't know whether the card received the r/w cmd or not, so try to
|
|
* restore things back to a sane state. Essentially, we do this as follows:
|
|
* - Obtain card status. If the first attempt to obtain card status fails,
|
|
* the status word will reflect the failed status cmd, not the failed
|
|
* r/w cmd. If we fail to obtain card status, it suggests we can no
|
|
* longer communicate with the card.
|
|
* - Check the card state. If the card received the cmd but there was a
|
|
* transient problem with the response, it might still be in a data transfer
|
|
* mode. Try to send it a stop command. If this fails, we can't recover.
|
|
* - If the r/w cmd failed due to a response CRC error, it was probably
|
|
* transient, so retry the cmd.
|
|
* - If the r/w cmd timed out, but we didn't get the r/w cmd status, retry.
|
|
* - If the r/w cmd timed out, and the r/w cmd failed due to CRC error or
|
|
* illegal cmd, retry.
|
|
* Otherwise we don't understand what happened, so abort.
|
|
*/
|
|
static int mmc_blk_cmd_recovery(struct mmc_card *card, struct request *req,
|
|
struct mmc_blk_request *brq, bool *ecc_err, bool *gen_err)
|
|
{
|
|
bool prev_cmd_status_valid = true;
|
|
u32 status, stop_status = 0;
|
|
int err, retry;
|
|
|
|
if (mmc_card_removed(card))
|
|
return ERR_NOMEDIUM;
|
|
|
|
/*
|
|
* Try to get card status which indicates both the card state
|
|
* and why there was no response. If the first attempt fails,
|
|
* we can't be sure the returned status is for the r/w command.
|
|
*/
|
|
for (retry = 2; retry >= 0; retry--) {
|
|
err = __mmc_send_status(card, &status, 0);
|
|
if (!err)
|
|
break;
|
|
|
|
/* Re-tune if needed */
|
|
mmc_retune_recheck(card->host);
|
|
|
|
prev_cmd_status_valid = false;
|
|
pr_err("%s: error %d sending status command, %sing\n",
|
|
req->rq_disk->disk_name, err, retry ? "retry" : "abort");
|
|
}
|
|
|
|
/* We couldn't get a response from the card. Give up. */
|
|
if (err) {
|
|
/* Check if the card is removed */
|
|
if (mmc_detect_card_removed(card->host))
|
|
return ERR_NOMEDIUM;
|
|
return ERR_ABORT;
|
|
}
|
|
|
|
/* Flag ECC errors */
|
|
if ((status & R1_CARD_ECC_FAILED) ||
|
|
(brq->stop.resp[0] & R1_CARD_ECC_FAILED) ||
|
|
(brq->cmd.resp[0] & R1_CARD_ECC_FAILED))
|
|
*ecc_err = true;
|
|
|
|
/* Flag General errors */
|
|
if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ)
|
|
if ((status & R1_ERROR) ||
|
|
(brq->stop.resp[0] & R1_ERROR)) {
|
|
pr_err("%s: %s: general error sending stop or status command, stop cmd response %#x, card status %#x\n",
|
|
req->rq_disk->disk_name, __func__,
|
|
brq->stop.resp[0], status);
|
|
*gen_err = true;
|
|
}
|
|
|
|
/*
|
|
* Check the current card state. If it is in some data transfer
|
|
* mode, tell it to stop (and hopefully transition back to TRAN.)
|
|
*/
|
|
if (R1_CURRENT_STATE(status) == R1_STATE_DATA ||
|
|
R1_CURRENT_STATE(status) == R1_STATE_RCV) {
|
|
err = send_stop(card,
|
|
DIV_ROUND_UP(brq->data.timeout_ns, 1000000),
|
|
req, gen_err, &stop_status);
|
|
if (err) {
|
|
pr_err("%s: error %d sending stop command\n",
|
|
req->rq_disk->disk_name, err);
|
|
/*
|
|
* If the stop cmd also timed out, the card is probably
|
|
* not present, so abort. Other errors are bad news too.
|
|
*/
|
|
return ERR_ABORT;
|
|
}
|
|
|
|
if (stop_status & R1_CARD_ECC_FAILED)
|
|
*ecc_err = true;
|
|
}
|
|
|
|
/* Check for set block count errors */
|
|
if (brq->sbc.error)
|
|
return mmc_blk_cmd_error(req, "SET_BLOCK_COUNT", brq->sbc.error,
|
|
prev_cmd_status_valid, status);
|
|
|
|
/* Check for r/w command errors */
|
|
if (brq->cmd.error)
|
|
return mmc_blk_cmd_error(req, "r/w cmd", brq->cmd.error,
|
|
prev_cmd_status_valid, status);
|
|
|
|
/* Data errors */
|
|
if (!brq->stop.error)
|
|
return ERR_CONTINUE;
|
|
|
|
/* Now for stop errors. These aren't fatal to the transfer. */
|
|
pr_info("%s: error %d sending stop command, original cmd response %#x, card status %#x\n",
|
|
req->rq_disk->disk_name, brq->stop.error,
|
|
brq->cmd.resp[0], status);
|
|
|
|
/*
|
|
* Subsitute in our own stop status as this will give the error
|
|
* state which happened during the execution of the r/w command.
|
|
*/
|
|
if (stop_status) {
|
|
brq->stop.resp[0] = stop_status;
|
|
brq->stop.error = 0;
|
|
}
|
|
return ERR_CONTINUE;
|
|
}
|
|
|
|
static int mmc_blk_reset(struct mmc_blk_data *md, struct mmc_host *host,
|
|
int type)
|
|
{
|
|
int err;
|
|
|
|
if (md->reset_done & type)
|
|
return -EEXIST;
|
|
|
|
md->reset_done |= type;
|
|
err = mmc_hw_reset(host);
|
|
/* Ensure we switch back to the correct partition */
|
|
if (err != -EOPNOTSUPP) {
|
|
struct mmc_blk_data *main_md =
|
|
dev_get_drvdata(&host->card->dev);
|
|
int part_err;
|
|
|
|
main_md->part_curr = main_md->part_type;
|
|
part_err = mmc_blk_part_switch(host->card, md->part_type);
|
|
if (part_err) {
|
|
/*
|
|
* We have failed to get back into the correct
|
|
* partition, so we need to abort the whole request.
|
|
*/
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
return err;
|
|
}
|
|
|
|
static inline void mmc_blk_reset_success(struct mmc_blk_data *md, int type)
|
|
{
|
|
md->reset_done &= ~type;
|
|
}
|
|
|
|
/*
|
|
* The non-block commands come back from the block layer after it queued it and
|
|
* processed it with all other requests and then they get issued in this
|
|
* function.
|
|
*/
|
|
static void mmc_blk_issue_drv_op(struct mmc_queue *mq, struct request *req)
|
|
{
|
|
struct mmc_queue_req *mq_rq;
|
|
struct mmc_card *card = mq->card;
|
|
struct mmc_blk_data *md = mq->blkdata;
|
|
struct mmc_blk_ioc_data **idata;
|
|
bool rpmb_ioctl;
|
|
u8 **ext_csd;
|
|
u32 status;
|
|
int ret;
|
|
int i;
|
|
|
|
mq_rq = req_to_mmc_queue_req(req);
|
|
rpmb_ioctl = (mq_rq->drv_op == MMC_DRV_OP_IOCTL_RPMB);
|
|
|
|
switch (mq_rq->drv_op) {
|
|
case MMC_DRV_OP_IOCTL:
|
|
case MMC_DRV_OP_IOCTL_RPMB:
|
|
idata = mq_rq->drv_op_data;
|
|
for (i = 0, ret = 0; i < mq_rq->ioc_count; i++) {
|
|
ret = __mmc_blk_ioctl_cmd(card, md, idata[i]);
|
|
if (ret)
|
|
break;
|
|
}
|
|
/* Always switch back to main area after RPMB access */
|
|
if (rpmb_ioctl)
|
|
mmc_blk_part_switch(card, 0);
|
|
break;
|
|
case MMC_DRV_OP_BOOT_WP:
|
|
ret = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BOOT_WP,
|
|
card->ext_csd.boot_ro_lock |
|
|
EXT_CSD_BOOT_WP_B_PWR_WP_EN,
|
|
card->ext_csd.part_time);
|
|
if (ret)
|
|
pr_err("%s: Locking boot partition ro until next power on failed: %d\n",
|
|
md->disk->disk_name, ret);
|
|
else
|
|
card->ext_csd.boot_ro_lock |=
|
|
EXT_CSD_BOOT_WP_B_PWR_WP_EN;
|
|
break;
|
|
case MMC_DRV_OP_GET_CARD_STATUS:
|
|
ret = mmc_send_status(card, &status);
|
|
if (!ret)
|
|
ret = status;
|
|
break;
|
|
case MMC_DRV_OP_GET_EXT_CSD:
|
|
ext_csd = mq_rq->drv_op_data;
|
|
ret = mmc_get_ext_csd(card, ext_csd);
|
|
break;
|
|
default:
|
|
pr_err("%s: unknown driver specific operation\n",
|
|
md->disk->disk_name);
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
mq_rq->drv_op_result = ret;
|
|
blk_end_request_all(req, ret ? BLK_STS_IOERR : BLK_STS_OK);
|
|
}
|
|
|
|
static void mmc_blk_issue_discard_rq(struct mmc_queue *mq, struct request *req)
|
|
{
|
|
struct mmc_blk_data *md = mq->blkdata;
|
|
struct mmc_card *card = md->queue.card;
|
|
unsigned int from, nr, arg;
|
|
int err = 0, type = MMC_BLK_DISCARD;
|
|
blk_status_t status = BLK_STS_OK;
|
|
|
|
if (!mmc_can_erase(card)) {
|
|
status = BLK_STS_NOTSUPP;
|
|
goto fail;
|
|
}
|
|
|
|
from = blk_rq_pos(req);
|
|
nr = blk_rq_sectors(req);
|
|
|
|
if (mmc_can_discard(card))
|
|
arg = MMC_DISCARD_ARG;
|
|
else if (mmc_can_trim(card))
|
|
arg = MMC_TRIM_ARG;
|
|
else
|
|
arg = MMC_ERASE_ARG;
|
|
do {
|
|
err = 0;
|
|
if (card->quirks & MMC_QUIRK_INAND_CMD38) {
|
|
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
|
|
INAND_CMD38_ARG_EXT_CSD,
|
|
arg == MMC_TRIM_ARG ?
|
|
INAND_CMD38_ARG_TRIM :
|
|
INAND_CMD38_ARG_ERASE,
|
|
0);
|
|
}
|
|
if (!err)
|
|
err = mmc_erase(card, from, nr, arg);
|
|
} while (err == -EIO && !mmc_blk_reset(md, card->host, type));
|
|
if (err)
|
|
status = BLK_STS_IOERR;
|
|
else
|
|
mmc_blk_reset_success(md, type);
|
|
fail:
|
|
blk_end_request(req, status, blk_rq_bytes(req));
|
|
}
|
|
|
|
static void mmc_blk_issue_secdiscard_rq(struct mmc_queue *mq,
|
|
struct request *req)
|
|
{
|
|
struct mmc_blk_data *md = mq->blkdata;
|
|
struct mmc_card *card = md->queue.card;
|
|
unsigned int from, nr, arg;
|
|
int err = 0, type = MMC_BLK_SECDISCARD;
|
|
blk_status_t status = BLK_STS_OK;
|
|
|
|
if (!(mmc_can_secure_erase_trim(card))) {
|
|
status = BLK_STS_NOTSUPP;
|
|
goto out;
|
|
}
|
|
|
|
from = blk_rq_pos(req);
|
|
nr = blk_rq_sectors(req);
|
|
|
|
if (mmc_can_trim(card) && !mmc_erase_group_aligned(card, from, nr))
|
|
arg = MMC_SECURE_TRIM1_ARG;
|
|
else
|
|
arg = MMC_SECURE_ERASE_ARG;
|
|
|
|
retry:
|
|
if (card->quirks & MMC_QUIRK_INAND_CMD38) {
|
|
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
|
|
INAND_CMD38_ARG_EXT_CSD,
|
|
arg == MMC_SECURE_TRIM1_ARG ?
|
|
INAND_CMD38_ARG_SECTRIM1 :
|
|
INAND_CMD38_ARG_SECERASE,
|
|
0);
|
|
if (err)
|
|
goto out_retry;
|
|
}
|
|
|
|
err = mmc_erase(card, from, nr, arg);
|
|
if (err == -EIO)
|
|
goto out_retry;
|
|
if (err) {
|
|
status = BLK_STS_IOERR;
|
|
goto out;
|
|
}
|
|
|
|
if (arg == MMC_SECURE_TRIM1_ARG) {
|
|
if (card->quirks & MMC_QUIRK_INAND_CMD38) {
|
|
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
|
|
INAND_CMD38_ARG_EXT_CSD,
|
|
INAND_CMD38_ARG_SECTRIM2,
|
|
0);
|
|
if (err)
|
|
goto out_retry;
|
|
}
|
|
|
|
err = mmc_erase(card, from, nr, MMC_SECURE_TRIM2_ARG);
|
|
if (err == -EIO)
|
|
goto out_retry;
|
|
if (err) {
|
|
status = BLK_STS_IOERR;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
out_retry:
|
|
if (err && !mmc_blk_reset(md, card->host, type))
|
|
goto retry;
|
|
if (!err)
|
|
mmc_blk_reset_success(md, type);
|
|
out:
|
|
blk_end_request(req, status, blk_rq_bytes(req));
|
|
}
|
|
|
|
static void mmc_blk_issue_flush(struct mmc_queue *mq, struct request *req)
|
|
{
|
|
struct mmc_blk_data *md = mq->blkdata;
|
|
struct mmc_card *card = md->queue.card;
|
|
int ret = 0;
|
|
|
|
ret = mmc_flush_cache(card);
|
|
blk_end_request_all(req, ret ? BLK_STS_IOERR : BLK_STS_OK);
|
|
}
|
|
|
|
/*
|
|
* Reformat current write as a reliable write, supporting
|
|
* both legacy and the enhanced reliable write MMC cards.
|
|
* In each transfer we'll handle only as much as a single
|
|
* reliable write can handle, thus finish the request in
|
|
* partial completions.
|
|
*/
|
|
static inline void mmc_apply_rel_rw(struct mmc_blk_request *brq,
|
|
struct mmc_card *card,
|
|
struct request *req)
|
|
{
|
|
if (!(card->ext_csd.rel_param & EXT_CSD_WR_REL_PARAM_EN)) {
|
|
/* Legacy mode imposes restrictions on transfers. */
|
|
if (!IS_ALIGNED(blk_rq_pos(req), card->ext_csd.rel_sectors))
|
|
brq->data.blocks = 1;
|
|
|
|
if (brq->data.blocks > card->ext_csd.rel_sectors)
|
|
brq->data.blocks = card->ext_csd.rel_sectors;
|
|
else if (brq->data.blocks < card->ext_csd.rel_sectors)
|
|
brq->data.blocks = 1;
|
|
}
|
|
}
|
|
|
|
#define CMD_ERRORS \
|
|
(R1_OUT_OF_RANGE | /* Command argument out of range */ \
|
|
R1_ADDRESS_ERROR | /* Misaligned address */ \
|
|
R1_BLOCK_LEN_ERROR | /* Transferred block length incorrect */\
|
|
R1_WP_VIOLATION | /* Tried to write to protected block */ \
|
|
R1_CARD_ECC_FAILED | /* Card ECC failed */ \
|
|
R1_CC_ERROR | /* Card controller error */ \
|
|
R1_ERROR) /* General/unknown error */
|
|
|
|
static void mmc_blk_eval_resp_error(struct mmc_blk_request *brq)
|
|
{
|
|
u32 val;
|
|
|
|
/*
|
|
* Per the SD specification(physical layer version 4.10)[1],
|
|
* section 4.3.3, it explicitly states that "When the last
|
|
* block of user area is read using CMD18, the host should
|
|
* ignore OUT_OF_RANGE error that may occur even the sequence
|
|
* is correct". And JESD84-B51 for eMMC also has a similar
|
|
* statement on section 6.8.3.
|
|
*
|
|
* Multiple block read/write could be done by either predefined
|
|
* method, namely CMD23, or open-ending mode. For open-ending mode,
|
|
* we should ignore the OUT_OF_RANGE error as it's normal behaviour.
|
|
*
|
|
* However the spec[1] doesn't tell us whether we should also
|
|
* ignore that for predefined method. But per the spec[1], section
|
|
* 4.15 Set Block Count Command, it says"If illegal block count
|
|
* is set, out of range error will be indicated during read/write
|
|
* operation (For example, data transfer is stopped at user area
|
|
* boundary)." In another word, we could expect a out of range error
|
|
* in the response for the following CMD18/25. And if argument of
|
|
* CMD23 + the argument of CMD18/25 exceed the max number of blocks,
|
|
* we could also expect to get a -ETIMEDOUT or any error number from
|
|
* the host drivers due to missing data response(for write)/data(for
|
|
* read), as the cards will stop the data transfer by itself per the
|
|
* spec. So we only need to check R1_OUT_OF_RANGE for open-ending mode.
|
|
*/
|
|
|
|
if (!brq->stop.error) {
|
|
bool oor_with_open_end;
|
|
/* If there is no error yet, check R1 response */
|
|
|
|
val = brq->stop.resp[0] & CMD_ERRORS;
|
|
oor_with_open_end = val & R1_OUT_OF_RANGE && !brq->mrq.sbc;
|
|
|
|
if (val && !oor_with_open_end)
|
|
brq->stop.error = -EIO;
|
|
}
|
|
}
|
|
|
|
static enum mmc_blk_status mmc_blk_err_check(struct mmc_card *card,
|
|
struct mmc_async_req *areq)
|
|
{
|
|
struct mmc_queue_req *mq_mrq = container_of(areq, struct mmc_queue_req,
|
|
areq);
|
|
struct mmc_blk_request *brq = &mq_mrq->brq;
|
|
struct request *req = mmc_queue_req_to_req(mq_mrq);
|
|
int need_retune = card->host->need_retune;
|
|
bool ecc_err = false;
|
|
bool gen_err = false;
|
|
|
|
/*
|
|
* sbc.error indicates a problem with the set block count
|
|
* command. No data will have been transferred.
|
|
*
|
|
* cmd.error indicates a problem with the r/w command. No
|
|
* data will have been transferred.
|
|
*
|
|
* stop.error indicates a problem with the stop command. Data
|
|
* may have been transferred, or may still be transferring.
|
|
*/
|
|
|
|
mmc_blk_eval_resp_error(brq);
|
|
|
|
if (brq->sbc.error || brq->cmd.error ||
|
|
brq->stop.error || brq->data.error) {
|
|
switch (mmc_blk_cmd_recovery(card, req, brq, &ecc_err, &gen_err)) {
|
|
case ERR_RETRY:
|
|
return MMC_BLK_RETRY;
|
|
case ERR_ABORT:
|
|
return MMC_BLK_ABORT;
|
|
case ERR_NOMEDIUM:
|
|
return MMC_BLK_NOMEDIUM;
|
|
case ERR_CONTINUE:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Check for errors relating to the execution of the
|
|
* initial command - such as address errors. No data
|
|
* has been transferred.
|
|
*/
|
|
if (brq->cmd.resp[0] & CMD_ERRORS) {
|
|
pr_err("%s: r/w command failed, status = %#x\n",
|
|
req->rq_disk->disk_name, brq->cmd.resp[0]);
|
|
return MMC_BLK_ABORT;
|
|
}
|
|
|
|
/*
|
|
* Everything else is either success, or a data error of some
|
|
* kind. If it was a write, we may have transitioned to
|
|
* program mode, which we have to wait for it to complete.
|
|
*/
|
|
if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) {
|
|
int err;
|
|
|
|
/* Check stop command response */
|
|
if (brq->stop.resp[0] & R1_ERROR) {
|
|
pr_err("%s: %s: general error sending stop command, stop cmd response %#x\n",
|
|
req->rq_disk->disk_name, __func__,
|
|
brq->stop.resp[0]);
|
|
gen_err = true;
|
|
}
|
|
|
|
err = card_busy_detect(card, MMC_BLK_TIMEOUT_MS, false, req,
|
|
&gen_err);
|
|
if (err)
|
|
return MMC_BLK_CMD_ERR;
|
|
}
|
|
|
|
/* if general error occurs, retry the write operation. */
|
|
if (gen_err) {
|
|
pr_warn("%s: retrying write for general error\n",
|
|
req->rq_disk->disk_name);
|
|
return MMC_BLK_RETRY;
|
|
}
|
|
|
|
/* Some errors (ECC) are flagged on the next commmand, so check stop, too */
|
|
if (brq->data.error || brq->stop.error) {
|
|
if (need_retune && !brq->retune_retry_done) {
|
|
pr_debug("%s: retrying because a re-tune was needed\n",
|
|
req->rq_disk->disk_name);
|
|
brq->retune_retry_done = 1;
|
|
return MMC_BLK_RETRY;
|
|
}
|
|
pr_err("%s: error %d transferring data, sector %u, nr %u, cmd response %#x, card status %#x\n",
|
|
req->rq_disk->disk_name, brq->data.error ?: brq->stop.error,
|
|
(unsigned)blk_rq_pos(req),
|
|
(unsigned)blk_rq_sectors(req),
|
|
brq->cmd.resp[0], brq->stop.resp[0]);
|
|
|
|
if (rq_data_dir(req) == READ) {
|
|
if (ecc_err)
|
|
return MMC_BLK_ECC_ERR;
|
|
return MMC_BLK_DATA_ERR;
|
|
} else {
|
|
return MMC_BLK_CMD_ERR;
|
|
}
|
|
}
|
|
|
|
if (!brq->data.bytes_xfered)
|
|
return MMC_BLK_RETRY;
|
|
|
|
if (blk_rq_bytes(req) != brq->data.bytes_xfered)
|
|
return MMC_BLK_PARTIAL;
|
|
|
|
return MMC_BLK_SUCCESS;
|
|
}
|
|
|
|
static void mmc_blk_data_prep(struct mmc_queue *mq, struct mmc_queue_req *mqrq,
|
|
int disable_multi, bool *do_rel_wr_p,
|
|
bool *do_data_tag_p)
|
|
{
|
|
struct mmc_blk_data *md = mq->blkdata;
|
|
struct mmc_card *card = md->queue.card;
|
|
struct mmc_blk_request *brq = &mqrq->brq;
|
|
struct request *req = mmc_queue_req_to_req(mqrq);
|
|
bool do_rel_wr, do_data_tag;
|
|
|
|
/*
|
|
* Reliable writes are used to implement Forced Unit Access and
|
|
* are supported only on MMCs.
|
|
*/
|
|
do_rel_wr = (req->cmd_flags & REQ_FUA) &&
|
|
rq_data_dir(req) == WRITE &&
|
|
(md->flags & MMC_BLK_REL_WR);
|
|
|
|
memset(brq, 0, sizeof(struct mmc_blk_request));
|
|
|
|
brq->mrq.data = &brq->data;
|
|
brq->mrq.tag = req->tag;
|
|
|
|
brq->stop.opcode = MMC_STOP_TRANSMISSION;
|
|
brq->stop.arg = 0;
|
|
|
|
if (rq_data_dir(req) == READ) {
|
|
brq->data.flags = MMC_DATA_READ;
|
|
brq->stop.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
|
|
} else {
|
|
brq->data.flags = MMC_DATA_WRITE;
|
|
brq->stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
|
|
}
|
|
|
|
brq->data.blksz = 512;
|
|
brq->data.blocks = blk_rq_sectors(req);
|
|
brq->data.blk_addr = blk_rq_pos(req);
|
|
|
|
/*
|
|
* The command queue supports 2 priorities: "high" (1) and "simple" (0).
|
|
* The eMMC will give "high" priority tasks priority over "simple"
|
|
* priority tasks. Here we always set "simple" priority by not setting
|
|
* MMC_DATA_PRIO.
|
|
*/
|
|
|
|
/*
|
|
* The block layer doesn't support all sector count
|
|
* restrictions, so we need to be prepared for too big
|
|
* requests.
|
|
*/
|
|
if (brq->data.blocks > card->host->max_blk_count)
|
|
brq->data.blocks = card->host->max_blk_count;
|
|
|
|
if (brq->data.blocks > 1) {
|
|
/*
|
|
* After a read error, we redo the request one sector
|
|
* at a time in order to accurately determine which
|
|
* sectors can be read successfully.
|
|
*/
|
|
if (disable_multi)
|
|
brq->data.blocks = 1;
|
|
|
|
/*
|
|
* Some controllers have HW issues while operating
|
|
* in multiple I/O mode
|
|
*/
|
|
if (card->host->ops->multi_io_quirk)
|
|
brq->data.blocks = card->host->ops->multi_io_quirk(card,
|
|
(rq_data_dir(req) == READ) ?
|
|
MMC_DATA_READ : MMC_DATA_WRITE,
|
|
brq->data.blocks);
|
|
}
|
|
|
|
if (do_rel_wr) {
|
|
mmc_apply_rel_rw(brq, card, req);
|
|
brq->data.flags |= MMC_DATA_REL_WR;
|
|
}
|
|
|
|
/*
|
|
* Data tag is used only during writing meta data to speed
|
|
* up write and any subsequent read of this meta data
|
|
*/
|
|
do_data_tag = card->ext_csd.data_tag_unit_size &&
|
|
(req->cmd_flags & REQ_META) &&
|
|
(rq_data_dir(req) == WRITE) &&
|
|
((brq->data.blocks * brq->data.blksz) >=
|
|
card->ext_csd.data_tag_unit_size);
|
|
|
|
if (do_data_tag)
|
|
brq->data.flags |= MMC_DATA_DAT_TAG;
|
|
|
|
mmc_set_data_timeout(&brq->data, card);
|
|
|
|
brq->data.sg = mqrq->sg;
|
|
brq->data.sg_len = mmc_queue_map_sg(mq, mqrq);
|
|
|
|
/*
|
|
* Adjust the sg list so it is the same size as the
|
|
* request.
|
|
*/
|
|
if (brq->data.blocks != blk_rq_sectors(req)) {
|
|
int i, data_size = brq->data.blocks << 9;
|
|
struct scatterlist *sg;
|
|
|
|
for_each_sg(brq->data.sg, sg, brq->data.sg_len, i) {
|
|
data_size -= sg->length;
|
|
if (data_size <= 0) {
|
|
sg->length += data_size;
|
|
i++;
|
|
break;
|
|
}
|
|
}
|
|
brq->data.sg_len = i;
|
|
}
|
|
|
|
mqrq->areq.mrq = &brq->mrq;
|
|
|
|
if (do_rel_wr_p)
|
|
*do_rel_wr_p = do_rel_wr;
|
|
|
|
if (do_data_tag_p)
|
|
*do_data_tag_p = do_data_tag;
|
|
}
|
|
|
|
static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
|
|
struct mmc_card *card,
|
|
int disable_multi,
|
|
struct mmc_queue *mq)
|
|
{
|
|
u32 readcmd, writecmd;
|
|
struct mmc_blk_request *brq = &mqrq->brq;
|
|
struct request *req = mmc_queue_req_to_req(mqrq);
|
|
struct mmc_blk_data *md = mq->blkdata;
|
|
bool do_rel_wr, do_data_tag;
|
|
|
|
mmc_blk_data_prep(mq, mqrq, disable_multi, &do_rel_wr, &do_data_tag);
|
|
|
|
brq->mrq.cmd = &brq->cmd;
|
|
|
|
brq->cmd.arg = blk_rq_pos(req);
|
|
if (!mmc_card_blockaddr(card))
|
|
brq->cmd.arg <<= 9;
|
|
brq->cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
|
|
|
|
if (brq->data.blocks > 1 || do_rel_wr) {
|
|
/* SPI multiblock writes terminate using a special
|
|
* token, not a STOP_TRANSMISSION request.
|
|
*/
|
|
if (!mmc_host_is_spi(card->host) ||
|
|
rq_data_dir(req) == READ)
|
|
brq->mrq.stop = &brq->stop;
|
|
readcmd = MMC_READ_MULTIPLE_BLOCK;
|
|
writecmd = MMC_WRITE_MULTIPLE_BLOCK;
|
|
} else {
|
|
brq->mrq.stop = NULL;
|
|
readcmd = MMC_READ_SINGLE_BLOCK;
|
|
writecmd = MMC_WRITE_BLOCK;
|
|
}
|
|
brq->cmd.opcode = rq_data_dir(req) == READ ? readcmd : writecmd;
|
|
|
|
/*
|
|
* Pre-defined multi-block transfers are preferable to
|
|
* open ended-ones (and necessary for reliable writes).
|
|
* However, it is not sufficient to just send CMD23,
|
|
* and avoid the final CMD12, as on an error condition
|
|
* CMD12 (stop) needs to be sent anyway. This, coupled
|
|
* with Auto-CMD23 enhancements provided by some
|
|
* hosts, means that the complexity of dealing
|
|
* with this is best left to the host. If CMD23 is
|
|
* supported by card and host, we'll fill sbc in and let
|
|
* the host deal with handling it correctly. This means
|
|
* that for hosts that don't expose MMC_CAP_CMD23, no
|
|
* change of behavior will be observed.
|
|
*
|
|
* N.B: Some MMC cards experience perf degradation.
|
|
* We'll avoid using CMD23-bounded multiblock writes for
|
|
* these, while retaining features like reliable writes.
|
|
*/
|
|
if ((md->flags & MMC_BLK_CMD23) && mmc_op_multi(brq->cmd.opcode) &&
|
|
(do_rel_wr || !(card->quirks & MMC_QUIRK_BLK_NO_CMD23) ||
|
|
do_data_tag)) {
|
|
brq->sbc.opcode = MMC_SET_BLOCK_COUNT;
|
|
brq->sbc.arg = brq->data.blocks |
|
|
(do_rel_wr ? (1 << 31) : 0) |
|
|
(do_data_tag ? (1 << 29) : 0);
|
|
brq->sbc.flags = MMC_RSP_R1 | MMC_CMD_AC;
|
|
brq->mrq.sbc = &brq->sbc;
|
|
}
|
|
|
|
mqrq->areq.err_check = mmc_blk_err_check;
|
|
}
|
|
|
|
static bool mmc_blk_rw_cmd_err(struct mmc_blk_data *md, struct mmc_card *card,
|
|
struct mmc_blk_request *brq, struct request *req,
|
|
bool old_req_pending)
|
|
{
|
|
bool req_pending;
|
|
|
|
/*
|
|
* If this is an SD card and we're writing, we can first
|
|
* mark the known good sectors as ok.
|
|
*
|
|
* If the card is not SD, we can still ok written sectors
|
|
* as reported by the controller (which might be less than
|
|
* the real number of written sectors, but never more).
|
|
*/
|
|
if (mmc_card_sd(card)) {
|
|
u32 blocks;
|
|
int err;
|
|
|
|
err = mmc_sd_num_wr_blocks(card, &blocks);
|
|
if (err)
|
|
req_pending = old_req_pending;
|
|
else
|
|
req_pending = blk_end_request(req, BLK_STS_OK, blocks << 9);
|
|
} else {
|
|
req_pending = blk_end_request(req, BLK_STS_OK, brq->data.bytes_xfered);
|
|
}
|
|
return req_pending;
|
|
}
|
|
|
|
static void mmc_blk_rw_cmd_abort(struct mmc_queue *mq, struct mmc_card *card,
|
|
struct request *req,
|
|
struct mmc_queue_req *mqrq)
|
|
{
|
|
if (mmc_card_removed(card))
|
|
req->rq_flags |= RQF_QUIET;
|
|
while (blk_end_request(req, BLK_STS_IOERR, blk_rq_cur_bytes(req)));
|
|
mq->qcnt--;
|
|
}
|
|
|
|
/**
|
|
* mmc_blk_rw_try_restart() - tries to restart the current async request
|
|
* @mq: the queue with the card and host to restart
|
|
* @req: a new request that want to be started after the current one
|
|
*/
|
|
static void mmc_blk_rw_try_restart(struct mmc_queue *mq, struct request *req,
|
|
struct mmc_queue_req *mqrq)
|
|
{
|
|
if (!req)
|
|
return;
|
|
|
|
/*
|
|
* If the card was removed, just cancel everything and return.
|
|
*/
|
|
if (mmc_card_removed(mq->card)) {
|
|
req->rq_flags |= RQF_QUIET;
|
|
blk_end_request_all(req, BLK_STS_IOERR);
|
|
mq->qcnt--; /* FIXME: just set to 0? */
|
|
return;
|
|
}
|
|
/* Else proceed and try to restart the current async request */
|
|
mmc_blk_rw_rq_prep(mqrq, mq->card, 0, mq);
|
|
mmc_start_areq(mq->card->host, &mqrq->areq, NULL);
|
|
}
|
|
|
|
static void mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *new_req)
|
|
{
|
|
struct mmc_blk_data *md = mq->blkdata;
|
|
struct mmc_card *card = md->queue.card;
|
|
struct mmc_blk_request *brq;
|
|
int disable_multi = 0, retry = 0, type, retune_retry_done = 0;
|
|
enum mmc_blk_status status;
|
|
struct mmc_queue_req *mqrq_cur = NULL;
|
|
struct mmc_queue_req *mq_rq;
|
|
struct request *old_req;
|
|
struct mmc_async_req *new_areq;
|
|
struct mmc_async_req *old_areq;
|
|
bool req_pending = true;
|
|
|
|
if (new_req) {
|
|
mqrq_cur = req_to_mmc_queue_req(new_req);
|
|
mq->qcnt++;
|
|
}
|
|
|
|
if (!mq->qcnt)
|
|
return;
|
|
|
|
do {
|
|
if (new_req) {
|
|
/*
|
|
* When 4KB native sector is enabled, only 8 blocks
|
|
* multiple read or write is allowed
|
|
*/
|
|
if (mmc_large_sector(card) &&
|
|
!IS_ALIGNED(blk_rq_sectors(new_req), 8)) {
|
|
pr_err("%s: Transfer size is not 4KB sector size aligned\n",
|
|
new_req->rq_disk->disk_name);
|
|
mmc_blk_rw_cmd_abort(mq, card, new_req, mqrq_cur);
|
|
return;
|
|
}
|
|
|
|
mmc_blk_rw_rq_prep(mqrq_cur, card, 0, mq);
|
|
new_areq = &mqrq_cur->areq;
|
|
} else
|
|
new_areq = NULL;
|
|
|
|
old_areq = mmc_start_areq(card->host, new_areq, &status);
|
|
if (!old_areq) {
|
|
/*
|
|
* We have just put the first request into the pipeline
|
|
* and there is nothing more to do until it is
|
|
* complete.
|
|
*/
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* An asynchronous request has been completed and we proceed
|
|
* to handle the result of it.
|
|
*/
|
|
mq_rq = container_of(old_areq, struct mmc_queue_req, areq);
|
|
brq = &mq_rq->brq;
|
|
old_req = mmc_queue_req_to_req(mq_rq);
|
|
type = rq_data_dir(old_req) == READ ? MMC_BLK_READ : MMC_BLK_WRITE;
|
|
|
|
switch (status) {
|
|
case MMC_BLK_SUCCESS:
|
|
case MMC_BLK_PARTIAL:
|
|
/*
|
|
* A block was successfully transferred.
|
|
*/
|
|
mmc_blk_reset_success(md, type);
|
|
|
|
req_pending = blk_end_request(old_req, BLK_STS_OK,
|
|
brq->data.bytes_xfered);
|
|
/*
|
|
* If the blk_end_request function returns non-zero even
|
|
* though all data has been transferred and no errors
|
|
* were returned by the host controller, it's a bug.
|
|
*/
|
|
if (status == MMC_BLK_SUCCESS && req_pending) {
|
|
pr_err("%s BUG rq_tot %d d_xfer %d\n",
|
|
__func__, blk_rq_bytes(old_req),
|
|
brq->data.bytes_xfered);
|
|
mmc_blk_rw_cmd_abort(mq, card, old_req, mq_rq);
|
|
return;
|
|
}
|
|
break;
|
|
case MMC_BLK_CMD_ERR:
|
|
req_pending = mmc_blk_rw_cmd_err(md, card, brq, old_req, req_pending);
|
|
if (mmc_blk_reset(md, card->host, type)) {
|
|
if (req_pending)
|
|
mmc_blk_rw_cmd_abort(mq, card, old_req, mq_rq);
|
|
else
|
|
mq->qcnt--;
|
|
mmc_blk_rw_try_restart(mq, new_req, mqrq_cur);
|
|
return;
|
|
}
|
|
if (!req_pending) {
|
|
mq->qcnt--;
|
|
mmc_blk_rw_try_restart(mq, new_req, mqrq_cur);
|
|
return;
|
|
}
|
|
break;
|
|
case MMC_BLK_RETRY:
|
|
retune_retry_done = brq->retune_retry_done;
|
|
if (retry++ < 5)
|
|
break;
|
|
/* Fall through */
|
|
case MMC_BLK_ABORT:
|
|
if (!mmc_blk_reset(md, card->host, type))
|
|
break;
|
|
mmc_blk_rw_cmd_abort(mq, card, old_req, mq_rq);
|
|
mmc_blk_rw_try_restart(mq, new_req, mqrq_cur);
|
|
return;
|
|
case MMC_BLK_DATA_ERR: {
|
|
int err;
|
|
|
|
err = mmc_blk_reset(md, card->host, type);
|
|
if (!err)
|
|
break;
|
|
if (err == -ENODEV) {
|
|
mmc_blk_rw_cmd_abort(mq, card, old_req, mq_rq);
|
|
mmc_blk_rw_try_restart(mq, new_req, mqrq_cur);
|
|
return;
|
|
}
|
|
/* Fall through */
|
|
}
|
|
case MMC_BLK_ECC_ERR:
|
|
if (brq->data.blocks > 1) {
|
|
/* Redo read one sector at a time */
|
|
pr_warn("%s: retrying using single block read\n",
|
|
old_req->rq_disk->disk_name);
|
|
disable_multi = 1;
|
|
break;
|
|
}
|
|
/*
|
|
* After an error, we redo I/O one sector at a
|
|
* time, so we only reach here after trying to
|
|
* read a single sector.
|
|
*/
|
|
req_pending = blk_end_request(old_req, BLK_STS_IOERR,
|
|
brq->data.blksz);
|
|
if (!req_pending) {
|
|
mq->qcnt--;
|
|
mmc_blk_rw_try_restart(mq, new_req, mqrq_cur);
|
|
return;
|
|
}
|
|
break;
|
|
case MMC_BLK_NOMEDIUM:
|
|
mmc_blk_rw_cmd_abort(mq, card, old_req, mq_rq);
|
|
mmc_blk_rw_try_restart(mq, new_req, mqrq_cur);
|
|
return;
|
|
default:
|
|
pr_err("%s: Unhandled return value (%d)",
|
|
old_req->rq_disk->disk_name, status);
|
|
mmc_blk_rw_cmd_abort(mq, card, old_req, mq_rq);
|
|
mmc_blk_rw_try_restart(mq, new_req, mqrq_cur);
|
|
return;
|
|
}
|
|
|
|
if (req_pending) {
|
|
/*
|
|
* In case of a incomplete request
|
|
* prepare it again and resend.
|
|
*/
|
|
mmc_blk_rw_rq_prep(mq_rq, card,
|
|
disable_multi, mq);
|
|
mmc_start_areq(card->host,
|
|
&mq_rq->areq, NULL);
|
|
mq_rq->brq.retune_retry_done = retune_retry_done;
|
|
}
|
|
} while (req_pending);
|
|
|
|
mq->qcnt--;
|
|
}
|
|
|
|
void mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
|
|
{
|
|
int ret;
|
|
struct mmc_blk_data *md = mq->blkdata;
|
|
struct mmc_card *card = md->queue.card;
|
|
|
|
if (req && !mq->qcnt)
|
|
/* claim host only for the first request */
|
|
mmc_get_card(card, NULL);
|
|
|
|
ret = mmc_blk_part_switch(card, md->part_type);
|
|
if (ret) {
|
|
if (req) {
|
|
blk_end_request_all(req, BLK_STS_IOERR);
|
|
}
|
|
goto out;
|
|
}
|
|
|
|
if (req) {
|
|
switch (req_op(req)) {
|
|
case REQ_OP_DRV_IN:
|
|
case REQ_OP_DRV_OUT:
|
|
/*
|
|
* Complete ongoing async transfer before issuing
|
|
* ioctl()s
|
|
*/
|
|
if (mq->qcnt)
|
|
mmc_blk_issue_rw_rq(mq, NULL);
|
|
mmc_blk_issue_drv_op(mq, req);
|
|
break;
|
|
case REQ_OP_DISCARD:
|
|
/*
|
|
* Complete ongoing async transfer before issuing
|
|
* discard.
|
|
*/
|
|
if (mq->qcnt)
|
|
mmc_blk_issue_rw_rq(mq, NULL);
|
|
mmc_blk_issue_discard_rq(mq, req);
|
|
break;
|
|
case REQ_OP_SECURE_ERASE:
|
|
/*
|
|
* Complete ongoing async transfer before issuing
|
|
* secure erase.
|
|
*/
|
|
if (mq->qcnt)
|
|
mmc_blk_issue_rw_rq(mq, NULL);
|
|
mmc_blk_issue_secdiscard_rq(mq, req);
|
|
break;
|
|
case REQ_OP_FLUSH:
|
|
/*
|
|
* Complete ongoing async transfer before issuing
|
|
* flush.
|
|
*/
|
|
if (mq->qcnt)
|
|
mmc_blk_issue_rw_rq(mq, NULL);
|
|
mmc_blk_issue_flush(mq, req);
|
|
break;
|
|
default:
|
|
/* Normal request, just issue it */
|
|
mmc_blk_issue_rw_rq(mq, req);
|
|
card->host->context_info.is_waiting_last_req = false;
|
|
break;
|
|
}
|
|
} else {
|
|
/* No request, flushing the pipeline with NULL */
|
|
mmc_blk_issue_rw_rq(mq, NULL);
|
|
card->host->context_info.is_waiting_last_req = false;
|
|
}
|
|
|
|
out:
|
|
if (!mq->qcnt)
|
|
mmc_put_card(card, NULL);
|
|
}
|
|
|
|
static inline int mmc_blk_readonly(struct mmc_card *card)
|
|
{
|
|
return mmc_card_readonly(card) ||
|
|
!(card->csd.cmdclass & CCC_BLOCK_WRITE);
|
|
}
|
|
|
|
static struct mmc_blk_data *mmc_blk_alloc_req(struct mmc_card *card,
|
|
struct device *parent,
|
|
sector_t size,
|
|
bool default_ro,
|
|
const char *subname,
|
|
int area_type)
|
|
{
|
|
struct mmc_blk_data *md;
|
|
int devidx, ret;
|
|
|
|
devidx = ida_simple_get(&mmc_blk_ida, 0, max_devices, GFP_KERNEL);
|
|
if (devidx < 0) {
|
|
/*
|
|
* We get -ENOSPC because there are no more any available
|
|
* devidx. The reason may be that, either userspace haven't yet
|
|
* unmounted the partitions, which postpones mmc_blk_release()
|
|
* from being called, or the device has more partitions than
|
|
* what we support.
|
|
*/
|
|
if (devidx == -ENOSPC)
|
|
dev_err(mmc_dev(card->host),
|
|
"no more device IDs available\n");
|
|
|
|
return ERR_PTR(devidx);
|
|
}
|
|
|
|
md = kzalloc(sizeof(struct mmc_blk_data), GFP_KERNEL);
|
|
if (!md) {
|
|
ret = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
md->area_type = area_type;
|
|
|
|
/*
|
|
* Set the read-only status based on the supported commands
|
|
* and the write protect switch.
|
|
*/
|
|
md->read_only = mmc_blk_readonly(card);
|
|
|
|
md->disk = alloc_disk(perdev_minors);
|
|
if (md->disk == NULL) {
|
|
ret = -ENOMEM;
|
|
goto err_kfree;
|
|
}
|
|
|
|
spin_lock_init(&md->lock);
|
|
INIT_LIST_HEAD(&md->part);
|
|
INIT_LIST_HEAD(&md->rpmbs);
|
|
md->usage = 1;
|
|
|
|
ret = mmc_init_queue(&md->queue, card, &md->lock, subname);
|
|
if (ret)
|
|
goto err_putdisk;
|
|
|
|
md->queue.blkdata = md;
|
|
|
|
md->disk->major = MMC_BLOCK_MAJOR;
|
|
md->disk->first_minor = devidx * perdev_minors;
|
|
md->disk->fops = &mmc_bdops;
|
|
md->disk->private_data = md;
|
|
md->disk->queue = md->queue.queue;
|
|
md->parent = parent;
|
|
set_disk_ro(md->disk, md->read_only || default_ro);
|
|
md->disk->flags = GENHD_FL_EXT_DEVT;
|
|
if (area_type & (MMC_BLK_DATA_AREA_RPMB | MMC_BLK_DATA_AREA_BOOT))
|
|
md->disk->flags |= GENHD_FL_NO_PART_SCAN;
|
|
|
|
/*
|
|
* As discussed on lkml, GENHD_FL_REMOVABLE should:
|
|
*
|
|
* - be set for removable media with permanent block devices
|
|
* - be unset for removable block devices with permanent media
|
|
*
|
|
* Since MMC block devices clearly fall under the second
|
|
* case, we do not set GENHD_FL_REMOVABLE. Userspace
|
|
* should use the block device creation/destruction hotplug
|
|
* messages to tell when the card is present.
|
|
*/
|
|
|
|
snprintf(md->disk->disk_name, sizeof(md->disk->disk_name),
|
|
"mmcblk%u%s", card->host->index, subname ? subname : "");
|
|
|
|
if (mmc_card_mmc(card))
|
|
blk_queue_logical_block_size(md->queue.queue,
|
|
card->ext_csd.data_sector_size);
|
|
else
|
|
blk_queue_logical_block_size(md->queue.queue, 512);
|
|
|
|
set_capacity(md->disk, size);
|
|
|
|
if (mmc_host_cmd23(card->host)) {
|
|
if ((mmc_card_mmc(card) &&
|
|
card->csd.mmca_vsn >= CSD_SPEC_VER_3) ||
|
|
(mmc_card_sd(card) &&
|
|
card->scr.cmds & SD_SCR_CMD23_SUPPORT))
|
|
md->flags |= MMC_BLK_CMD23;
|
|
}
|
|
|
|
if (mmc_card_mmc(card) &&
|
|
md->flags & MMC_BLK_CMD23 &&
|
|
((card->ext_csd.rel_param & EXT_CSD_WR_REL_PARAM_EN) ||
|
|
card->ext_csd.rel_sectors)) {
|
|
md->flags |= MMC_BLK_REL_WR;
|
|
blk_queue_write_cache(md->queue.queue, true, true);
|
|
}
|
|
|
|
return md;
|
|
|
|
err_putdisk:
|
|
put_disk(md->disk);
|
|
err_kfree:
|
|
kfree(md);
|
|
out:
|
|
ida_simple_remove(&mmc_blk_ida, devidx);
|
|
return ERR_PTR(ret);
|
|
}
|
|
|
|
static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card)
|
|
{
|
|
sector_t size;
|
|
|
|
if (!mmc_card_sd(card) && mmc_card_blockaddr(card)) {
|
|
/*
|
|
* The EXT_CSD sector count is in number or 512 byte
|
|
* sectors.
|
|
*/
|
|
size = card->ext_csd.sectors;
|
|
} else {
|
|
/*
|
|
* The CSD capacity field is in units of read_blkbits.
|
|
* set_capacity takes units of 512 bytes.
|
|
*/
|
|
size = (typeof(sector_t))card->csd.capacity
|
|
<< (card->csd.read_blkbits - 9);
|
|
}
|
|
|
|
return mmc_blk_alloc_req(card, &card->dev, size, false, NULL,
|
|
MMC_BLK_DATA_AREA_MAIN);
|
|
}
|
|
|
|
static int mmc_blk_alloc_part(struct mmc_card *card,
|
|
struct mmc_blk_data *md,
|
|
unsigned int part_type,
|
|
sector_t size,
|
|
bool default_ro,
|
|
const char *subname,
|
|
int area_type)
|
|
{
|
|
char cap_str[10];
|
|
struct mmc_blk_data *part_md;
|
|
|
|
part_md = mmc_blk_alloc_req(card, disk_to_dev(md->disk), size, default_ro,
|
|
subname, area_type);
|
|
if (IS_ERR(part_md))
|
|
return PTR_ERR(part_md);
|
|
part_md->part_type = part_type;
|
|
list_add(&part_md->part, &md->part);
|
|
|
|
string_get_size((u64)get_capacity(part_md->disk), 512, STRING_UNITS_2,
|
|
cap_str, sizeof(cap_str));
|
|
pr_info("%s: %s %s partition %u %s\n",
|
|
part_md->disk->disk_name, mmc_card_id(card),
|
|
mmc_card_name(card), part_md->part_type, cap_str);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* mmc_rpmb_ioctl() - ioctl handler for the RPMB chardev
|
|
* @filp: the character device file
|
|
* @cmd: the ioctl() command
|
|
* @arg: the argument from userspace
|
|
*
|
|
* This will essentially just redirect the ioctl()s coming in over to
|
|
* the main block device spawning the RPMB character device.
|
|
*/
|
|
static long mmc_rpmb_ioctl(struct file *filp, unsigned int cmd,
|
|
unsigned long arg)
|
|
{
|
|
struct mmc_rpmb_data *rpmb = filp->private_data;
|
|
int ret;
|
|
|
|
switch (cmd) {
|
|
case MMC_IOC_CMD:
|
|
ret = mmc_blk_ioctl_cmd(rpmb->md,
|
|
(struct mmc_ioc_cmd __user *)arg,
|
|
rpmb);
|
|
break;
|
|
case MMC_IOC_MULTI_CMD:
|
|
ret = mmc_blk_ioctl_multi_cmd(rpmb->md,
|
|
(struct mmc_ioc_multi_cmd __user *)arg,
|
|
rpmb);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_COMPAT
|
|
static long mmc_rpmb_ioctl_compat(struct file *filp, unsigned int cmd,
|
|
unsigned long arg)
|
|
{
|
|
return mmc_rpmb_ioctl(filp, cmd, (unsigned long)compat_ptr(arg));
|
|
}
|
|
#endif
|
|
|
|
static int mmc_rpmb_chrdev_open(struct inode *inode, struct file *filp)
|
|
{
|
|
struct mmc_rpmb_data *rpmb = container_of(inode->i_cdev,
|
|
struct mmc_rpmb_data, chrdev);
|
|
|
|
get_device(&rpmb->dev);
|
|
filp->private_data = rpmb;
|
|
mmc_blk_get(rpmb->md->disk);
|
|
|
|
return nonseekable_open(inode, filp);
|
|
}
|
|
|
|
static int mmc_rpmb_chrdev_release(struct inode *inode, struct file *filp)
|
|
{
|
|
struct mmc_rpmb_data *rpmb = container_of(inode->i_cdev,
|
|
struct mmc_rpmb_data, chrdev);
|
|
|
|
put_device(&rpmb->dev);
|
|
mmc_blk_put(rpmb->md);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct file_operations mmc_rpmb_fileops = {
|
|
.release = mmc_rpmb_chrdev_release,
|
|
.open = mmc_rpmb_chrdev_open,
|
|
.owner = THIS_MODULE,
|
|
.llseek = no_llseek,
|
|
.unlocked_ioctl = mmc_rpmb_ioctl,
|
|
#ifdef CONFIG_COMPAT
|
|
.compat_ioctl = mmc_rpmb_ioctl_compat,
|
|
#endif
|
|
};
|
|
|
|
static void mmc_blk_rpmb_device_release(struct device *dev)
|
|
{
|
|
struct mmc_rpmb_data *rpmb = dev_get_drvdata(dev);
|
|
|
|
ida_simple_remove(&mmc_rpmb_ida, rpmb->id);
|
|
kfree(rpmb);
|
|
}
|
|
|
|
static int mmc_blk_alloc_rpmb_part(struct mmc_card *card,
|
|
struct mmc_blk_data *md,
|
|
unsigned int part_index,
|
|
sector_t size,
|
|
const char *subname)
|
|
{
|
|
int devidx, ret;
|
|
char rpmb_name[DISK_NAME_LEN];
|
|
char cap_str[10];
|
|
struct mmc_rpmb_data *rpmb;
|
|
|
|
/* This creates the minor number for the RPMB char device */
|
|
devidx = ida_simple_get(&mmc_rpmb_ida, 0, max_devices, GFP_KERNEL);
|
|
if (devidx < 0)
|
|
return devidx;
|
|
|
|
rpmb = kzalloc(sizeof(*rpmb), GFP_KERNEL);
|
|
if (!rpmb) {
|
|
ida_simple_remove(&mmc_rpmb_ida, devidx);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
snprintf(rpmb_name, sizeof(rpmb_name),
|
|
"mmcblk%u%s", card->host->index, subname ? subname : "");
|
|
|
|
rpmb->id = devidx;
|
|
rpmb->part_index = part_index;
|
|
rpmb->dev.init_name = rpmb_name;
|
|
rpmb->dev.bus = &mmc_rpmb_bus_type;
|
|
rpmb->dev.devt = MKDEV(MAJOR(mmc_rpmb_devt), rpmb->id);
|
|
rpmb->dev.parent = &card->dev;
|
|
rpmb->dev.release = mmc_blk_rpmb_device_release;
|
|
device_initialize(&rpmb->dev);
|
|
dev_set_drvdata(&rpmb->dev, rpmb);
|
|
rpmb->md = md;
|
|
|
|
cdev_init(&rpmb->chrdev, &mmc_rpmb_fileops);
|
|
rpmb->chrdev.owner = THIS_MODULE;
|
|
ret = cdev_device_add(&rpmb->chrdev, &rpmb->dev);
|
|
if (ret) {
|
|
pr_err("%s: could not add character device\n", rpmb_name);
|
|
goto out_put_device;
|
|
}
|
|
|
|
list_add(&rpmb->node, &md->rpmbs);
|
|
|
|
string_get_size((u64)size, 512, STRING_UNITS_2,
|
|
cap_str, sizeof(cap_str));
|
|
|
|
pr_info("%s: %s %s partition %u %s, chardev (%d:%d)\n",
|
|
rpmb_name, mmc_card_id(card),
|
|
mmc_card_name(card), EXT_CSD_PART_CONFIG_ACC_RPMB, cap_str,
|
|
MAJOR(mmc_rpmb_devt), rpmb->id);
|
|
|
|
return 0;
|
|
|
|
out_put_device:
|
|
put_device(&rpmb->dev);
|
|
return ret;
|
|
}
|
|
|
|
static void mmc_blk_remove_rpmb_part(struct mmc_rpmb_data *rpmb)
|
|
|
|
{
|
|
cdev_device_del(&rpmb->chrdev, &rpmb->dev);
|
|
put_device(&rpmb->dev);
|
|
}
|
|
|
|
/* MMC Physical partitions consist of two boot partitions and
|
|
* up to four general purpose partitions.
|
|
* For each partition enabled in EXT_CSD a block device will be allocatedi
|
|
* to provide access to the partition.
|
|
*/
|
|
|
|
static int mmc_blk_alloc_parts(struct mmc_card *card, struct mmc_blk_data *md)
|
|
{
|
|
int idx, ret;
|
|
|
|
if (!mmc_card_mmc(card))
|
|
return 0;
|
|
|
|
for (idx = 0; idx < card->nr_parts; idx++) {
|
|
if (card->part[idx].area_type & MMC_BLK_DATA_AREA_RPMB) {
|
|
/*
|
|
* RPMB partitions does not provide block access, they
|
|
* are only accessed using ioctl():s. Thus create
|
|
* special RPMB block devices that do not have a
|
|
* backing block queue for these.
|
|
*/
|
|
ret = mmc_blk_alloc_rpmb_part(card, md,
|
|
card->part[idx].part_cfg,
|
|
card->part[idx].size >> 9,
|
|
card->part[idx].name);
|
|
if (ret)
|
|
return ret;
|
|
} else if (card->part[idx].size) {
|
|
ret = mmc_blk_alloc_part(card, md,
|
|
card->part[idx].part_cfg,
|
|
card->part[idx].size >> 9,
|
|
card->part[idx].force_ro,
|
|
card->part[idx].name,
|
|
card->part[idx].area_type);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mmc_blk_remove_req(struct mmc_blk_data *md)
|
|
{
|
|
struct mmc_card *card;
|
|
|
|
if (md) {
|
|
/*
|
|
* Flush remaining requests and free queues. It
|
|
* is freeing the queue that stops new requests
|
|
* from being accepted.
|
|
*/
|
|
card = md->queue.card;
|
|
spin_lock_irq(md->queue.queue->queue_lock);
|
|
queue_flag_set(QUEUE_FLAG_BYPASS, md->queue.queue);
|
|
spin_unlock_irq(md->queue.queue->queue_lock);
|
|
blk_set_queue_dying(md->queue.queue);
|
|
mmc_cleanup_queue(&md->queue);
|
|
if (md->disk->flags & GENHD_FL_UP) {
|
|
device_remove_file(disk_to_dev(md->disk), &md->force_ro);
|
|
if ((md->area_type & MMC_BLK_DATA_AREA_BOOT) &&
|
|
card->ext_csd.boot_ro_lockable)
|
|
device_remove_file(disk_to_dev(md->disk),
|
|
&md->power_ro_lock);
|
|
|
|
del_gendisk(md->disk);
|
|
}
|
|
mmc_blk_put(md);
|
|
}
|
|
}
|
|
|
|
static void mmc_blk_remove_parts(struct mmc_card *card,
|
|
struct mmc_blk_data *md)
|
|
{
|
|
struct list_head *pos, *q;
|
|
struct mmc_blk_data *part_md;
|
|
struct mmc_rpmb_data *rpmb;
|
|
|
|
/* Remove RPMB partitions */
|
|
list_for_each_safe(pos, q, &md->rpmbs) {
|
|
rpmb = list_entry(pos, struct mmc_rpmb_data, node);
|
|
list_del(pos);
|
|
mmc_blk_remove_rpmb_part(rpmb);
|
|
}
|
|
/* Remove block partitions */
|
|
list_for_each_safe(pos, q, &md->part) {
|
|
part_md = list_entry(pos, struct mmc_blk_data, part);
|
|
list_del(pos);
|
|
mmc_blk_remove_req(part_md);
|
|
}
|
|
}
|
|
|
|
static int mmc_add_disk(struct mmc_blk_data *md)
|
|
{
|
|
int ret;
|
|
struct mmc_card *card = md->queue.card;
|
|
|
|
device_add_disk(md->parent, md->disk);
|
|
md->force_ro.show = force_ro_show;
|
|
md->force_ro.store = force_ro_store;
|
|
sysfs_attr_init(&md->force_ro.attr);
|
|
md->force_ro.attr.name = "force_ro";
|
|
md->force_ro.attr.mode = S_IRUGO | S_IWUSR;
|
|
ret = device_create_file(disk_to_dev(md->disk), &md->force_ro);
|
|
if (ret)
|
|
goto force_ro_fail;
|
|
|
|
if ((md->area_type & MMC_BLK_DATA_AREA_BOOT) &&
|
|
card->ext_csd.boot_ro_lockable) {
|
|
umode_t mode;
|
|
|
|
if (card->ext_csd.boot_ro_lock & EXT_CSD_BOOT_WP_B_PWR_WP_DIS)
|
|
mode = S_IRUGO;
|
|
else
|
|
mode = S_IRUGO | S_IWUSR;
|
|
|
|
md->power_ro_lock.show = power_ro_lock_show;
|
|
md->power_ro_lock.store = power_ro_lock_store;
|
|
sysfs_attr_init(&md->power_ro_lock.attr);
|
|
md->power_ro_lock.attr.mode = mode;
|
|
md->power_ro_lock.attr.name =
|
|
"ro_lock_until_next_power_on";
|
|
ret = device_create_file(disk_to_dev(md->disk),
|
|
&md->power_ro_lock);
|
|
if (ret)
|
|
goto power_ro_lock_fail;
|
|
}
|
|
return ret;
|
|
|
|
power_ro_lock_fail:
|
|
device_remove_file(disk_to_dev(md->disk), &md->force_ro);
|
|
force_ro_fail:
|
|
del_gendisk(md->disk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
|
|
static int mmc_dbg_card_status_get(void *data, u64 *val)
|
|
{
|
|
struct mmc_card *card = data;
|
|
struct mmc_blk_data *md = dev_get_drvdata(&card->dev);
|
|
struct mmc_queue *mq = &md->queue;
|
|
struct request *req;
|
|
int ret;
|
|
|
|
/* Ask the block layer about the card status */
|
|
req = blk_get_request(mq->queue, REQ_OP_DRV_IN, __GFP_RECLAIM);
|
|
if (IS_ERR(req))
|
|
return PTR_ERR(req);
|
|
req_to_mmc_queue_req(req)->drv_op = MMC_DRV_OP_GET_CARD_STATUS;
|
|
blk_execute_rq(mq->queue, NULL, req, 0);
|
|
ret = req_to_mmc_queue_req(req)->drv_op_result;
|
|
if (ret >= 0) {
|
|
*val = ret;
|
|
ret = 0;
|
|
}
|
|
blk_put_request(req);
|
|
|
|
return ret;
|
|
}
|
|
DEFINE_SIMPLE_ATTRIBUTE(mmc_dbg_card_status_fops, mmc_dbg_card_status_get,
|
|
NULL, "%08llx\n");
|
|
|
|
/* That is two digits * 512 + 1 for newline */
|
|
#define EXT_CSD_STR_LEN 1025
|
|
|
|
static int mmc_ext_csd_open(struct inode *inode, struct file *filp)
|
|
{
|
|
struct mmc_card *card = inode->i_private;
|
|
struct mmc_blk_data *md = dev_get_drvdata(&card->dev);
|
|
struct mmc_queue *mq = &md->queue;
|
|
struct request *req;
|
|
char *buf;
|
|
ssize_t n = 0;
|
|
u8 *ext_csd;
|
|
int err, i;
|
|
|
|
buf = kmalloc(EXT_CSD_STR_LEN + 1, GFP_KERNEL);
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
/* Ask the block layer for the EXT CSD */
|
|
req = blk_get_request(mq->queue, REQ_OP_DRV_IN, __GFP_RECLAIM);
|
|
if (IS_ERR(req)) {
|
|
err = PTR_ERR(req);
|
|
goto out_free;
|
|
}
|
|
req_to_mmc_queue_req(req)->drv_op = MMC_DRV_OP_GET_EXT_CSD;
|
|
req_to_mmc_queue_req(req)->drv_op_data = &ext_csd;
|
|
blk_execute_rq(mq->queue, NULL, req, 0);
|
|
err = req_to_mmc_queue_req(req)->drv_op_result;
|
|
blk_put_request(req);
|
|
if (err) {
|
|
pr_err("FAILED %d\n", err);
|
|
goto out_free;
|
|
}
|
|
|
|
for (i = 0; i < 512; i++)
|
|
n += sprintf(buf + n, "%02x", ext_csd[i]);
|
|
n += sprintf(buf + n, "\n");
|
|
|
|
if (n != EXT_CSD_STR_LEN) {
|
|
err = -EINVAL;
|
|
goto out_free;
|
|
}
|
|
|
|
filp->private_data = buf;
|
|
kfree(ext_csd);
|
|
return 0;
|
|
|
|
out_free:
|
|
kfree(buf);
|
|
return err;
|
|
}
|
|
|
|
static ssize_t mmc_ext_csd_read(struct file *filp, char __user *ubuf,
|
|
size_t cnt, loff_t *ppos)
|
|
{
|
|
char *buf = filp->private_data;
|
|
|
|
return simple_read_from_buffer(ubuf, cnt, ppos,
|
|
buf, EXT_CSD_STR_LEN);
|
|
}
|
|
|
|
static int mmc_ext_csd_release(struct inode *inode, struct file *file)
|
|
{
|
|
kfree(file->private_data);
|
|
return 0;
|
|
}
|
|
|
|
static const struct file_operations mmc_dbg_ext_csd_fops = {
|
|
.open = mmc_ext_csd_open,
|
|
.read = mmc_ext_csd_read,
|
|
.release = mmc_ext_csd_release,
|
|
.llseek = default_llseek,
|
|
};
|
|
|
|
static int mmc_blk_add_debugfs(struct mmc_card *card, struct mmc_blk_data *md)
|
|
{
|
|
struct dentry *root;
|
|
|
|
if (!card->debugfs_root)
|
|
return 0;
|
|
|
|
root = card->debugfs_root;
|
|
|
|
if (mmc_card_mmc(card) || mmc_card_sd(card)) {
|
|
md->status_dentry =
|
|
debugfs_create_file("status", S_IRUSR, root, card,
|
|
&mmc_dbg_card_status_fops);
|
|
if (!md->status_dentry)
|
|
return -EIO;
|
|
}
|
|
|
|
if (mmc_card_mmc(card)) {
|
|
md->ext_csd_dentry =
|
|
debugfs_create_file("ext_csd", S_IRUSR, root, card,
|
|
&mmc_dbg_ext_csd_fops);
|
|
if (!md->ext_csd_dentry)
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mmc_blk_remove_debugfs(struct mmc_card *card,
|
|
struct mmc_blk_data *md)
|
|
{
|
|
if (!card->debugfs_root)
|
|
return;
|
|
|
|
if (!IS_ERR_OR_NULL(md->status_dentry)) {
|
|
debugfs_remove(md->status_dentry);
|
|
md->status_dentry = NULL;
|
|
}
|
|
|
|
if (!IS_ERR_OR_NULL(md->ext_csd_dentry)) {
|
|
debugfs_remove(md->ext_csd_dentry);
|
|
md->ext_csd_dentry = NULL;
|
|
}
|
|
}
|
|
|
|
#else
|
|
|
|
static int mmc_blk_add_debugfs(struct mmc_card *card, struct mmc_blk_data *md)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void mmc_blk_remove_debugfs(struct mmc_card *card,
|
|
struct mmc_blk_data *md)
|
|
{
|
|
}
|
|
|
|
#endif /* CONFIG_DEBUG_FS */
|
|
|
|
static int mmc_blk_probe(struct mmc_card *card)
|
|
{
|
|
struct mmc_blk_data *md, *part_md;
|
|
char cap_str[10];
|
|
|
|
/*
|
|
* Check that the card supports the command class(es) we need.
|
|
*/
|
|
if (!(card->csd.cmdclass & CCC_BLOCK_READ))
|
|
return -ENODEV;
|
|
|
|
mmc_fixup_device(card, mmc_blk_fixups);
|
|
|
|
md = mmc_blk_alloc(card);
|
|
if (IS_ERR(md))
|
|
return PTR_ERR(md);
|
|
|
|
string_get_size((u64)get_capacity(md->disk), 512, STRING_UNITS_2,
|
|
cap_str, sizeof(cap_str));
|
|
pr_info("%s: %s %s %s %s\n",
|
|
md->disk->disk_name, mmc_card_id(card), mmc_card_name(card),
|
|
cap_str, md->read_only ? "(ro)" : "");
|
|
|
|
if (mmc_blk_alloc_parts(card, md))
|
|
goto out;
|
|
|
|
dev_set_drvdata(&card->dev, md);
|
|
|
|
if (mmc_add_disk(md))
|
|
goto out;
|
|
|
|
list_for_each_entry(part_md, &md->part, part) {
|
|
if (mmc_add_disk(part_md))
|
|
goto out;
|
|
}
|
|
|
|
/* Add two debugfs entries */
|
|
mmc_blk_add_debugfs(card, md);
|
|
|
|
pm_runtime_set_autosuspend_delay(&card->dev, 3000);
|
|
pm_runtime_use_autosuspend(&card->dev);
|
|
|
|
/*
|
|
* Don't enable runtime PM for SD-combo cards here. Leave that
|
|
* decision to be taken during the SDIO init sequence instead.
|
|
*/
|
|
if (card->type != MMC_TYPE_SD_COMBO) {
|
|
pm_runtime_set_active(&card->dev);
|
|
pm_runtime_enable(&card->dev);
|
|
}
|
|
|
|
return 0;
|
|
|
|
out:
|
|
mmc_blk_remove_parts(card, md);
|
|
mmc_blk_remove_req(md);
|
|
return 0;
|
|
}
|
|
|
|
static void mmc_blk_remove(struct mmc_card *card)
|
|
{
|
|
struct mmc_blk_data *md = dev_get_drvdata(&card->dev);
|
|
|
|
mmc_blk_remove_debugfs(card, md);
|
|
mmc_blk_remove_parts(card, md);
|
|
pm_runtime_get_sync(&card->dev);
|
|
mmc_claim_host(card->host);
|
|
mmc_blk_part_switch(card, md->part_type);
|
|
mmc_release_host(card->host);
|
|
if (card->type != MMC_TYPE_SD_COMBO)
|
|
pm_runtime_disable(&card->dev);
|
|
pm_runtime_put_noidle(&card->dev);
|
|
mmc_blk_remove_req(md);
|
|
dev_set_drvdata(&card->dev, NULL);
|
|
}
|
|
|
|
static int _mmc_blk_suspend(struct mmc_card *card)
|
|
{
|
|
struct mmc_blk_data *part_md;
|
|
struct mmc_blk_data *md = dev_get_drvdata(&card->dev);
|
|
|
|
if (md) {
|
|
mmc_queue_suspend(&md->queue);
|
|
list_for_each_entry(part_md, &md->part, part) {
|
|
mmc_queue_suspend(&part_md->queue);
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void mmc_blk_shutdown(struct mmc_card *card)
|
|
{
|
|
_mmc_blk_suspend(card);
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int mmc_blk_suspend(struct device *dev)
|
|
{
|
|
struct mmc_card *card = mmc_dev_to_card(dev);
|
|
|
|
return _mmc_blk_suspend(card);
|
|
}
|
|
|
|
static int mmc_blk_resume(struct device *dev)
|
|
{
|
|
struct mmc_blk_data *part_md;
|
|
struct mmc_blk_data *md = dev_get_drvdata(dev);
|
|
|
|
if (md) {
|
|
/*
|
|
* Resume involves the card going into idle state,
|
|
* so current partition is always the main one.
|
|
*/
|
|
md->part_curr = md->part_type;
|
|
mmc_queue_resume(&md->queue);
|
|
list_for_each_entry(part_md, &md->part, part) {
|
|
mmc_queue_resume(&part_md->queue);
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(mmc_blk_pm_ops, mmc_blk_suspend, mmc_blk_resume);
|
|
|
|
static struct mmc_driver mmc_driver = {
|
|
.drv = {
|
|
.name = "mmcblk",
|
|
.pm = &mmc_blk_pm_ops,
|
|
},
|
|
.probe = mmc_blk_probe,
|
|
.remove = mmc_blk_remove,
|
|
.shutdown = mmc_blk_shutdown,
|
|
};
|
|
|
|
static int __init mmc_blk_init(void)
|
|
{
|
|
int res;
|
|
|
|
res = bus_register(&mmc_rpmb_bus_type);
|
|
if (res < 0) {
|
|
pr_err("mmcblk: could not register RPMB bus type\n");
|
|
return res;
|
|
}
|
|
res = alloc_chrdev_region(&mmc_rpmb_devt, 0, MAX_DEVICES, "rpmb");
|
|
if (res < 0) {
|
|
pr_err("mmcblk: failed to allocate rpmb chrdev region\n");
|
|
goto out_bus_unreg;
|
|
}
|
|
|
|
if (perdev_minors != CONFIG_MMC_BLOCK_MINORS)
|
|
pr_info("mmcblk: using %d minors per device\n", perdev_minors);
|
|
|
|
max_devices = min(MAX_DEVICES, (1 << MINORBITS) / perdev_minors);
|
|
|
|
res = register_blkdev(MMC_BLOCK_MAJOR, "mmc");
|
|
if (res)
|
|
goto out_chrdev_unreg;
|
|
|
|
res = mmc_register_driver(&mmc_driver);
|
|
if (res)
|
|
goto out_blkdev_unreg;
|
|
|
|
return 0;
|
|
|
|
out_blkdev_unreg:
|
|
unregister_blkdev(MMC_BLOCK_MAJOR, "mmc");
|
|
out_chrdev_unreg:
|
|
unregister_chrdev_region(mmc_rpmb_devt, MAX_DEVICES);
|
|
out_bus_unreg:
|
|
bus_unregister(&mmc_rpmb_bus_type);
|
|
return res;
|
|
}
|
|
|
|
static void __exit mmc_blk_exit(void)
|
|
{
|
|
mmc_unregister_driver(&mmc_driver);
|
|
unregister_blkdev(MMC_BLOCK_MAJOR, "mmc");
|
|
unregister_chrdev_region(mmc_rpmb_devt, MAX_DEVICES);
|
|
}
|
|
|
|
module_init(mmc_blk_init);
|
|
module_exit(mmc_blk_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("Multimedia Card (MMC) block device driver");
|
|
|