forked from Minki/linux
8318d78a44
This patch creates new cfg80211 wiphy API for channel and bitrate registration and converts mac80211 and drivers to the new API. The old mac80211 API is completely ripped out. All drivers (except ath5k) are updated to the new API, in many cases I expect that optimisations can be done. Along with the regulatory code I've also ripped out the IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag, I believe it to be unnecessary if the hardware simply gives us whatever channels it wants to support and we then enable/disable them as required, which is pretty much required for travelling. Additionally, the patch adds proper "basic" rate handling for STA mode interface, AP mode interface will have to have new API added to allow userspace to set the basic rate set, currently it'll be empty... However, the basic rate handling will need to be moved to the BSS conf stuff. I do expect there to be bugs in this, especially wrt. transmit power handling where I'm basically clueless about how it should work. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2832 lines
80 KiB
C
2832 lines
80 KiB
C
/******************************************************************************
|
|
*
|
|
* Copyright(c) 2005 - 2007 Intel Corporation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of version 2 of the GNU General Public License as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
|
|
*
|
|
* The full GNU General Public License is included in this distribution in the
|
|
* file called LICENSE.
|
|
*
|
|
* Contact Information:
|
|
* James P. Ketrenos <ipw2100-admin@linux.intel.com>
|
|
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
|
|
*
|
|
*****************************************************************************/
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/wireless.h>
|
|
#include <net/mac80211.h>
|
|
#include <net/ieee80211.h>
|
|
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/workqueue.h>
|
|
|
|
#include "../net/mac80211/ieee80211_rate.h"
|
|
|
|
#include "iwl-4965.h"
|
|
#include "iwl-helpers.h"
|
|
|
|
#define RS_NAME "iwl-4965-rs"
|
|
|
|
#define NUM_TRY_BEFORE_ANTENNA_TOGGLE 1
|
|
#define IWL_NUMBER_TRY 1
|
|
#define IWL_HT_NUMBER_TRY 3
|
|
|
|
#define IWL_RATE_MAX_WINDOW 62 /* # tx in history window */
|
|
#define IWL_RATE_MIN_FAILURE_TH 6 /* min failures to calc tpt */
|
|
#define IWL_RATE_MIN_SUCCESS_TH 8 /* min successes to calc tpt */
|
|
|
|
/* max time to accum history 2 seconds */
|
|
#define IWL_RATE_SCALE_FLUSH_INTVL (2*HZ)
|
|
|
|
static u8 rs_ht_to_legacy[] = {
|
|
IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX,
|
|
IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX,
|
|
IWL_RATE_6M_INDEX,
|
|
IWL_RATE_6M_INDEX, IWL_RATE_9M_INDEX,
|
|
IWL_RATE_12M_INDEX, IWL_RATE_18M_INDEX,
|
|
IWL_RATE_24M_INDEX, IWL_RATE_36M_INDEX,
|
|
IWL_RATE_48M_INDEX, IWL_RATE_54M_INDEX
|
|
};
|
|
|
|
struct iwl4965_rate {
|
|
u32 rate_n_flags;
|
|
} __attribute__ ((packed));
|
|
|
|
/**
|
|
* struct iwl4965_rate_scale_data -- tx success history for one rate
|
|
*/
|
|
struct iwl4965_rate_scale_data {
|
|
u64 data; /* bitmap of successful frames */
|
|
s32 success_counter; /* number of frames successful */
|
|
s32 success_ratio; /* per-cent * 128 */
|
|
s32 counter; /* number of frames attempted */
|
|
s32 average_tpt; /* success ratio * expected throughput */
|
|
unsigned long stamp;
|
|
};
|
|
|
|
/**
|
|
* struct iwl4965_scale_tbl_info -- tx params and success history for all rates
|
|
*
|
|
* There are two of these in struct iwl4965_lq_sta,
|
|
* one for "active", and one for "search".
|
|
*/
|
|
struct iwl4965_scale_tbl_info {
|
|
enum iwl4965_table_type lq_type;
|
|
enum iwl4965_antenna_type antenna_type;
|
|
u8 is_SGI; /* 1 = short guard interval */
|
|
u8 is_fat; /* 1 = 40 MHz channel width */
|
|
u8 is_dup; /* 1 = duplicated data streams */
|
|
u8 action; /* change modulation; IWL_[LEGACY/SISO/MIMO]_SWITCH_* */
|
|
s32 *expected_tpt; /* throughput metrics; expected_tpt_G, etc. */
|
|
struct iwl4965_rate current_rate; /* rate_n_flags, uCode API format */
|
|
struct iwl4965_rate_scale_data win[IWL_RATE_COUNT]; /* rate histories */
|
|
};
|
|
|
|
#ifdef CONFIG_IWL4965_HT
|
|
|
|
struct iwl4965_traffic_load {
|
|
unsigned long time_stamp; /* age of the oldest statistics */
|
|
u32 packet_count[TID_QUEUE_MAX_SIZE]; /* packet count in this time
|
|
* slice */
|
|
u32 total; /* total num of packets during the
|
|
* last TID_MAX_TIME_DIFF */
|
|
u8 queue_count; /* number of queues that has
|
|
* been used since the last cleanup */
|
|
u8 head; /* start of the circular buffer */
|
|
};
|
|
|
|
#endif /* CONFIG_IWL4965_HT */
|
|
|
|
/**
|
|
* struct iwl4965_lq_sta -- driver's rate scaling private structure
|
|
*
|
|
* Pointer to this gets passed back and forth between driver and mac80211.
|
|
*/
|
|
struct iwl4965_lq_sta {
|
|
u8 active_tbl; /* index of active table, range 0-1 */
|
|
u8 enable_counter; /* indicates HT mode */
|
|
u8 stay_in_tbl; /* 1: disallow, 0: allow search for new mode */
|
|
u8 search_better_tbl; /* 1: currently trying alternate mode */
|
|
s32 last_tpt;
|
|
|
|
/* The following determine when to search for a new mode */
|
|
u32 table_count_limit;
|
|
u32 max_failure_limit; /* # failed frames before new search */
|
|
u32 max_success_limit; /* # successful frames before new search */
|
|
u32 table_count;
|
|
u32 total_failed; /* total failed frames, any/all rates */
|
|
u32 total_success; /* total successful frames, any/all rates */
|
|
u32 flush_timer; /* time staying in mode before new search */
|
|
|
|
u8 action_counter; /* # mode-switch actions tried */
|
|
u8 antenna;
|
|
u8 valid_antenna;
|
|
u8 is_green;
|
|
u8 is_dup;
|
|
enum ieee80211_band band;
|
|
u8 ibss_sta_added;
|
|
|
|
/* The following are bitmaps of rates; IWL_RATE_6M_MASK, etc. */
|
|
u32 supp_rates;
|
|
u16 active_rate;
|
|
u16 active_siso_rate;
|
|
u16 active_mimo_rate;
|
|
u16 active_rate_basic;
|
|
|
|
struct iwl4965_link_quality_cmd lq;
|
|
struct iwl4965_scale_tbl_info lq_info[LQ_SIZE]; /* "active", "search" */
|
|
#ifdef CONFIG_IWL4965_HT
|
|
struct iwl4965_traffic_load load[TID_MAX_LOAD_COUNT];
|
|
u8 tx_agg_tid_en;
|
|
#endif
|
|
#ifdef CONFIG_MAC80211_DEBUGFS
|
|
struct dentry *rs_sta_dbgfs_scale_table_file;
|
|
struct dentry *rs_sta_dbgfs_stats_table_file;
|
|
#ifdef CONFIG_IWL4965_HT
|
|
struct dentry *rs_sta_dbgfs_tx_agg_tid_en_file;
|
|
#endif
|
|
struct iwl4965_rate dbg_fixed;
|
|
struct iwl4965_priv *drv;
|
|
#endif
|
|
};
|
|
|
|
static void rs_rate_scale_perform(struct iwl4965_priv *priv,
|
|
struct net_device *dev,
|
|
struct ieee80211_hdr *hdr,
|
|
struct sta_info *sta);
|
|
static void rs_fill_link_cmd(struct iwl4965_lq_sta *lq_sta,
|
|
struct iwl4965_rate *tx_mcs,
|
|
struct iwl4965_link_quality_cmd *tbl);
|
|
|
|
|
|
#ifdef CONFIG_MAC80211_DEBUGFS
|
|
static void rs_dbgfs_set_mcs(struct iwl4965_lq_sta *lq_sta,
|
|
struct iwl4965_rate *mcs, int index);
|
|
#else
|
|
static void rs_dbgfs_set_mcs(struct iwl4965_lq_sta *lq_sta,
|
|
struct iwl4965_rate *mcs, int index)
|
|
{}
|
|
#endif
|
|
|
|
/*
|
|
* Expected throughput metrics for following rates:
|
|
* 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 60 MBits
|
|
* "G" is the only table that supports CCK (the first 4 rates).
|
|
*/
|
|
static s32 expected_tpt_A[IWL_RATE_COUNT] = {
|
|
0, 0, 0, 0, 40, 57, 72, 98, 121, 154, 177, 186, 186
|
|
};
|
|
|
|
static s32 expected_tpt_G[IWL_RATE_COUNT] = {
|
|
7, 13, 35, 58, 40, 57, 72, 98, 121, 154, 177, 186, 186
|
|
};
|
|
|
|
static s32 expected_tpt_siso20MHz[IWL_RATE_COUNT] = {
|
|
0, 0, 0, 0, 42, 42, 76, 102, 124, 159, 183, 193, 202
|
|
};
|
|
|
|
static s32 expected_tpt_siso20MHzSGI[IWL_RATE_COUNT] = {
|
|
0, 0, 0, 0, 46, 46, 82, 110, 132, 168, 192, 202, 211
|
|
};
|
|
|
|
static s32 expected_tpt_mimo20MHz[IWL_RATE_COUNT] = {
|
|
0, 0, 0, 0, 74, 74, 123, 155, 179, 214, 236, 244, 251
|
|
};
|
|
|
|
static s32 expected_tpt_mimo20MHzSGI[IWL_RATE_COUNT] = {
|
|
0, 0, 0, 0, 81, 81, 131, 164, 188, 222, 243, 251, 257
|
|
};
|
|
|
|
static s32 expected_tpt_siso40MHz[IWL_RATE_COUNT] = {
|
|
0, 0, 0, 0, 77, 77, 127, 160, 184, 220, 242, 250, 257
|
|
};
|
|
|
|
static s32 expected_tpt_siso40MHzSGI[IWL_RATE_COUNT] = {
|
|
0, 0, 0, 0, 83, 83, 135, 169, 193, 229, 250, 257, 264
|
|
};
|
|
|
|
static s32 expected_tpt_mimo40MHz[IWL_RATE_COUNT] = {
|
|
0, 0, 0, 0, 123, 123, 182, 214, 235, 264, 279, 285, 289
|
|
};
|
|
|
|
static s32 expected_tpt_mimo40MHzSGI[IWL_RATE_COUNT] = {
|
|
0, 0, 0, 0, 131, 131, 191, 222, 242, 270, 284, 289, 293
|
|
};
|
|
|
|
static int iwl4965_lq_sync_callback(struct iwl4965_priv *priv,
|
|
struct iwl4965_cmd *cmd, struct sk_buff *skb)
|
|
{
|
|
/*We didn't cache the SKB; let the caller free it */
|
|
return 1;
|
|
}
|
|
|
|
static inline u8 iwl4965_rate_get_rate(u32 rate_n_flags)
|
|
{
|
|
return (u8)(rate_n_flags & 0xFF);
|
|
}
|
|
|
|
static int rs_send_lq_cmd(struct iwl4965_priv *priv,
|
|
struct iwl4965_link_quality_cmd *lq, u8 flags)
|
|
{
|
|
#ifdef CONFIG_IWL4965_DEBUG
|
|
int i;
|
|
#endif
|
|
struct iwl4965_host_cmd cmd = {
|
|
.id = REPLY_TX_LINK_QUALITY_CMD,
|
|
.len = sizeof(struct iwl4965_link_quality_cmd),
|
|
.meta.flags = flags,
|
|
.data = lq,
|
|
};
|
|
|
|
if ((lq->sta_id == 0xFF) &&
|
|
(priv->iw_mode == IEEE80211_IF_TYPE_IBSS))
|
|
return -EINVAL;
|
|
|
|
if (lq->sta_id == 0xFF)
|
|
lq->sta_id = IWL_AP_ID;
|
|
|
|
IWL_DEBUG_RATE("lq station id 0x%x\n", lq->sta_id);
|
|
IWL_DEBUG_RATE("lq dta 0x%X 0x%X\n",
|
|
lq->general_params.single_stream_ant_msk,
|
|
lq->general_params.dual_stream_ant_msk);
|
|
#ifdef CONFIG_IWL4965_DEBUG
|
|
for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++)
|
|
IWL_DEBUG_RATE("lq index %d 0x%X\n",
|
|
i, lq->rs_table[i].rate_n_flags);
|
|
#endif
|
|
|
|
if (flags & CMD_ASYNC)
|
|
cmd.meta.u.callback = iwl4965_lq_sync_callback;
|
|
|
|
if (iwl4965_is_associated(priv) && priv->assoc_station_added &&
|
|
priv->lq_mngr.lq_ready)
|
|
return iwl4965_send_cmd(priv, &cmd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void rs_rate_scale_clear_window(struct iwl4965_rate_scale_data *window)
|
|
{
|
|
window->data = 0;
|
|
window->success_counter = 0;
|
|
window->success_ratio = IWL_INVALID_VALUE;
|
|
window->counter = 0;
|
|
window->average_tpt = IWL_INVALID_VALUE;
|
|
window->stamp = 0;
|
|
}
|
|
|
|
#ifdef CONFIG_IWL4965_HT
|
|
/*
|
|
* removes the old data from the statistics. All data that is older than
|
|
* TID_MAX_TIME_DIFF, will be deleted.
|
|
*/
|
|
static void rs_tl_rm_old_stats(struct iwl4965_traffic_load *tl, u32 curr_time)
|
|
{
|
|
/* The oldest age we want to keep */
|
|
u32 oldest_time = curr_time - TID_MAX_TIME_DIFF;
|
|
|
|
while (tl->queue_count &&
|
|
(tl->time_stamp < oldest_time)) {
|
|
tl->total -= tl->packet_count[tl->head];
|
|
tl->packet_count[tl->head] = 0;
|
|
tl->time_stamp += TID_QUEUE_CELL_SPACING;
|
|
tl->queue_count--;
|
|
tl->head++;
|
|
if (tl->head >= TID_QUEUE_MAX_SIZE)
|
|
tl->head = 0;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* increment traffic load value for tid and also remove
|
|
* any old values if passed the certain time period
|
|
*/
|
|
static void rs_tl_add_packet(struct iwl4965_lq_sta *lq_data, u8 tid)
|
|
{
|
|
u32 curr_time = jiffies_to_msecs(jiffies);
|
|
u32 time_diff;
|
|
s32 index;
|
|
struct iwl4965_traffic_load *tl = NULL;
|
|
|
|
if (tid >= TID_MAX_LOAD_COUNT)
|
|
return;
|
|
|
|
tl = &lq_data->load[tid];
|
|
|
|
curr_time -= curr_time % TID_ROUND_VALUE;
|
|
|
|
/* Happens only for the first packet. Initialize the data */
|
|
if (!(tl->queue_count)) {
|
|
tl->total = 1;
|
|
tl->time_stamp = curr_time;
|
|
tl->queue_count = 1;
|
|
tl->head = 0;
|
|
tl->packet_count[0] = 1;
|
|
return;
|
|
}
|
|
|
|
time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time);
|
|
index = time_diff / TID_QUEUE_CELL_SPACING;
|
|
|
|
/* The history is too long: remove data that is older than */
|
|
/* TID_MAX_TIME_DIFF */
|
|
if (index >= TID_QUEUE_MAX_SIZE)
|
|
rs_tl_rm_old_stats(tl, curr_time);
|
|
|
|
index = (tl->head + index) % TID_QUEUE_MAX_SIZE;
|
|
tl->packet_count[index] = tl->packet_count[index] + 1;
|
|
tl->total = tl->total + 1;
|
|
|
|
if ((index + 1) > tl->queue_count)
|
|
tl->queue_count = index + 1;
|
|
}
|
|
|
|
/*
|
|
get the traffic load value for tid
|
|
*/
|
|
static u32 rs_tl_get_load(struct iwl4965_lq_sta *lq_data, u8 tid)
|
|
{
|
|
u32 curr_time = jiffies_to_msecs(jiffies);
|
|
u32 time_diff;
|
|
s32 index;
|
|
struct iwl4965_traffic_load *tl = NULL;
|
|
|
|
if (tid >= TID_MAX_LOAD_COUNT)
|
|
return 0;
|
|
|
|
tl = &(lq_data->load[tid]);
|
|
|
|
curr_time -= curr_time % TID_ROUND_VALUE;
|
|
|
|
if (!(tl->queue_count))
|
|
return 0;
|
|
|
|
time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time);
|
|
index = time_diff / TID_QUEUE_CELL_SPACING;
|
|
|
|
/* The history is too long: remove data that is older than */
|
|
/* TID_MAX_TIME_DIFF */
|
|
if (index >= TID_QUEUE_MAX_SIZE)
|
|
rs_tl_rm_old_stats(tl, curr_time);
|
|
|
|
return tl->total;
|
|
}
|
|
|
|
static void rs_tl_turn_on_agg_for_tid(struct iwl4965_priv *priv,
|
|
struct iwl4965_lq_sta *lq_data, u8 tid,
|
|
struct sta_info *sta)
|
|
{
|
|
unsigned long state;
|
|
DECLARE_MAC_BUF(mac);
|
|
|
|
spin_lock_bh(&sta->ampdu_mlme.ampdu_tx);
|
|
state = sta->ampdu_mlme.tid_tx[tid].state;
|
|
spin_unlock_bh(&sta->ampdu_mlme.ampdu_tx);
|
|
|
|
if (state == HT_AGG_STATE_IDLE &&
|
|
rs_tl_get_load(lq_data, tid) > IWL_AGG_LOAD_THRESHOLD) {
|
|
IWL_DEBUG_HT("Starting Tx agg: STA: %s tid: %d\n",
|
|
print_mac(mac, sta->addr), tid);
|
|
ieee80211_start_tx_ba_session(priv->hw, sta->addr, tid);
|
|
}
|
|
}
|
|
|
|
static void rs_tl_turn_on_agg(struct iwl4965_priv *priv, u8 tid,
|
|
struct iwl4965_lq_sta *lq_data,
|
|
struct sta_info *sta)
|
|
{
|
|
if ((tid < TID_MAX_LOAD_COUNT))
|
|
rs_tl_turn_on_agg_for_tid(priv, lq_data, tid, sta);
|
|
else if (tid == IWL_AGG_ALL_TID)
|
|
for (tid = 0; tid < TID_MAX_LOAD_COUNT; tid++)
|
|
rs_tl_turn_on_agg_for_tid(priv, lq_data, tid, sta);
|
|
}
|
|
|
|
#endif /* CONFIG_IWLWIFI_HT */
|
|
|
|
/**
|
|
* rs_collect_tx_data - Update the success/failure sliding window
|
|
*
|
|
* We keep a sliding window of the last 62 packets transmitted
|
|
* at this rate. window->data contains the bitmask of successful
|
|
* packets.
|
|
*/
|
|
static int rs_collect_tx_data(struct iwl4965_rate_scale_data *windows,
|
|
int scale_index, s32 tpt, int retries,
|
|
int successes)
|
|
{
|
|
struct iwl4965_rate_scale_data *window = NULL;
|
|
u64 mask;
|
|
u8 win_size = IWL_RATE_MAX_WINDOW;
|
|
s32 fail_count;
|
|
|
|
if (scale_index < 0 || scale_index >= IWL_RATE_COUNT)
|
|
return -EINVAL;
|
|
|
|
/* Select data for current tx bit rate */
|
|
window = &(windows[scale_index]);
|
|
|
|
/*
|
|
* Keep track of only the latest 62 tx frame attempts in this rate's
|
|
* history window; anything older isn't really relevant any more.
|
|
* If we have filled up the sliding window, drop the oldest attempt;
|
|
* if the oldest attempt (highest bit in bitmap) shows "success",
|
|
* subtract "1" from the success counter (this is the main reason
|
|
* we keep these bitmaps!).
|
|
*/
|
|
while (retries > 0) {
|
|
if (window->counter >= win_size) {
|
|
window->counter = win_size - 1;
|
|
mask = 1;
|
|
mask = (mask << (win_size - 1));
|
|
if (window->data & mask) {
|
|
window->data &= ~mask;
|
|
window->success_counter =
|
|
window->success_counter - 1;
|
|
}
|
|
}
|
|
|
|
/* Increment frames-attempted counter */
|
|
window->counter++;
|
|
|
|
/* Shift bitmap by one frame (throw away oldest history),
|
|
* OR in "1", and increment "success" if this
|
|
* frame was successful. */
|
|
mask = window->data;
|
|
window->data = (mask << 1);
|
|
if (successes > 0) {
|
|
window->success_counter = window->success_counter + 1;
|
|
window->data |= 0x1;
|
|
successes--;
|
|
}
|
|
|
|
retries--;
|
|
}
|
|
|
|
/* Calculate current success ratio, avoid divide-by-0! */
|
|
if (window->counter > 0)
|
|
window->success_ratio = 128 * (100 * window->success_counter)
|
|
/ window->counter;
|
|
else
|
|
window->success_ratio = IWL_INVALID_VALUE;
|
|
|
|
fail_count = window->counter - window->success_counter;
|
|
|
|
/* Calculate average throughput, if we have enough history. */
|
|
if ((fail_count >= IWL_RATE_MIN_FAILURE_TH) ||
|
|
(window->success_counter >= IWL_RATE_MIN_SUCCESS_TH))
|
|
window->average_tpt = (window->success_ratio * tpt + 64) / 128;
|
|
else
|
|
window->average_tpt = IWL_INVALID_VALUE;
|
|
|
|
/* Tag this window as having been updated */
|
|
window->stamp = jiffies;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Fill uCode API rate_n_flags field, based on "search" or "active" table.
|
|
*/
|
|
static void rs_mcs_from_tbl(struct iwl4965_rate *mcs_rate,
|
|
struct iwl4965_scale_tbl_info *tbl,
|
|
int index, u8 use_green)
|
|
{
|
|
if (is_legacy(tbl->lq_type)) {
|
|
mcs_rate->rate_n_flags = iwl4965_rates[index].plcp;
|
|
if (index >= IWL_FIRST_CCK_RATE && index <= IWL_LAST_CCK_RATE)
|
|
mcs_rate->rate_n_flags |= RATE_MCS_CCK_MSK;
|
|
|
|
} else if (is_siso(tbl->lq_type)) {
|
|
if (index > IWL_LAST_OFDM_RATE)
|
|
index = IWL_LAST_OFDM_RATE;
|
|
mcs_rate->rate_n_flags = iwl4965_rates[index].plcp_siso |
|
|
RATE_MCS_HT_MSK;
|
|
} else {
|
|
if (index > IWL_LAST_OFDM_RATE)
|
|
index = IWL_LAST_OFDM_RATE;
|
|
mcs_rate->rate_n_flags = iwl4965_rates[index].plcp_mimo |
|
|
RATE_MCS_HT_MSK;
|
|
}
|
|
|
|
switch (tbl->antenna_type) {
|
|
case ANT_BOTH:
|
|
mcs_rate->rate_n_flags |= RATE_MCS_ANT_AB_MSK;
|
|
break;
|
|
case ANT_MAIN:
|
|
mcs_rate->rate_n_flags |= RATE_MCS_ANT_A_MSK;
|
|
break;
|
|
case ANT_AUX:
|
|
mcs_rate->rate_n_flags |= RATE_MCS_ANT_B_MSK;
|
|
break;
|
|
case ANT_NONE:
|
|
break;
|
|
}
|
|
|
|
if (is_legacy(tbl->lq_type))
|
|
return;
|
|
|
|
if (tbl->is_fat) {
|
|
if (tbl->is_dup)
|
|
mcs_rate->rate_n_flags |= RATE_MCS_DUP_MSK;
|
|
else
|
|
mcs_rate->rate_n_flags |= RATE_MCS_FAT_MSK;
|
|
}
|
|
if (tbl->is_SGI)
|
|
mcs_rate->rate_n_flags |= RATE_MCS_SGI_MSK;
|
|
|
|
if (use_green) {
|
|
mcs_rate->rate_n_flags |= RATE_MCS_GF_MSK;
|
|
if (is_siso(tbl->lq_type))
|
|
mcs_rate->rate_n_flags &= ~RATE_MCS_SGI_MSK;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Interpret uCode API's rate_n_flags format,
|
|
* fill "search" or "active" tx mode table.
|
|
*/
|
|
static int rs_get_tbl_info_from_mcs(const struct iwl4965_rate *mcs_rate,
|
|
enum ieee80211_band band,
|
|
struct iwl4965_scale_tbl_info *tbl,
|
|
int *rate_idx)
|
|
{
|
|
int index;
|
|
u32 ant_msk;
|
|
|
|
index = iwl4965_rate_index_from_plcp(mcs_rate->rate_n_flags);
|
|
|
|
if (index == IWL_RATE_INVALID) {
|
|
*rate_idx = -1;
|
|
return -EINVAL;
|
|
}
|
|
tbl->is_SGI = 0; /* default legacy setup */
|
|
tbl->is_fat = 0;
|
|
tbl->is_dup = 0;
|
|
tbl->antenna_type = ANT_BOTH; /* default MIMO setup */
|
|
|
|
/* legacy rate format */
|
|
if (!(mcs_rate->rate_n_flags & RATE_MCS_HT_MSK)) {
|
|
ant_msk = (mcs_rate->rate_n_flags & RATE_MCS_ANT_AB_MSK);
|
|
|
|
if (ant_msk == RATE_MCS_ANT_AB_MSK)
|
|
tbl->lq_type = LQ_NONE;
|
|
else {
|
|
|
|
if (band == IEEE80211_BAND_5GHZ)
|
|
tbl->lq_type = LQ_A;
|
|
else
|
|
tbl->lq_type = LQ_G;
|
|
|
|
if (mcs_rate->rate_n_flags & RATE_MCS_ANT_A_MSK)
|
|
tbl->antenna_type = ANT_MAIN;
|
|
else
|
|
tbl->antenna_type = ANT_AUX;
|
|
}
|
|
*rate_idx = index;
|
|
|
|
/* HT rate format, SISO (might be 20 MHz legacy or 40 MHz fat width) */
|
|
} else if (iwl4965_rate_get_rate(mcs_rate->rate_n_flags)
|
|
<= IWL_RATE_SISO_60M_PLCP) {
|
|
tbl->lq_type = LQ_SISO;
|
|
|
|
ant_msk = (mcs_rate->rate_n_flags & RATE_MCS_ANT_AB_MSK);
|
|
if (ant_msk == RATE_MCS_ANT_AB_MSK)
|
|
tbl->lq_type = LQ_NONE;
|
|
else {
|
|
if (mcs_rate->rate_n_flags & RATE_MCS_ANT_A_MSK)
|
|
tbl->antenna_type = ANT_MAIN;
|
|
else
|
|
tbl->antenna_type = ANT_AUX;
|
|
}
|
|
if (mcs_rate->rate_n_flags & RATE_MCS_SGI_MSK)
|
|
tbl->is_SGI = 1;
|
|
|
|
if ((mcs_rate->rate_n_flags & RATE_MCS_FAT_MSK) ||
|
|
(mcs_rate->rate_n_flags & RATE_MCS_DUP_MSK))
|
|
tbl->is_fat = 1;
|
|
|
|
if (mcs_rate->rate_n_flags & RATE_MCS_DUP_MSK)
|
|
tbl->is_dup = 1;
|
|
|
|
*rate_idx = index;
|
|
|
|
/* HT rate format, MIMO (might be 20 MHz legacy or 40 MHz fat width) */
|
|
} else {
|
|
tbl->lq_type = LQ_MIMO;
|
|
if (mcs_rate->rate_n_flags & RATE_MCS_SGI_MSK)
|
|
tbl->is_SGI = 1;
|
|
|
|
if ((mcs_rate->rate_n_flags & RATE_MCS_FAT_MSK) ||
|
|
(mcs_rate->rate_n_flags & RATE_MCS_DUP_MSK))
|
|
tbl->is_fat = 1;
|
|
|
|
if (mcs_rate->rate_n_flags & RATE_MCS_DUP_MSK)
|
|
tbl->is_dup = 1;
|
|
*rate_idx = index;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static inline void rs_toggle_antenna(struct iwl4965_rate *new_rate,
|
|
struct iwl4965_scale_tbl_info *tbl)
|
|
{
|
|
if (tbl->antenna_type == ANT_AUX) {
|
|
tbl->antenna_type = ANT_MAIN;
|
|
new_rate->rate_n_flags &= ~RATE_MCS_ANT_B_MSK;
|
|
new_rate->rate_n_flags |= RATE_MCS_ANT_A_MSK;
|
|
} else {
|
|
tbl->antenna_type = ANT_AUX;
|
|
new_rate->rate_n_flags &= ~RATE_MCS_ANT_A_MSK;
|
|
new_rate->rate_n_flags |= RATE_MCS_ANT_B_MSK;
|
|
}
|
|
}
|
|
|
|
static inline u8 rs_use_green(struct iwl4965_priv *priv,
|
|
struct ieee80211_conf *conf)
|
|
{
|
|
#ifdef CONFIG_IWL4965_HT
|
|
return ((conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) &&
|
|
priv->current_ht_config.is_green_field &&
|
|
!priv->current_ht_config.non_GF_STA_present);
|
|
#endif /* CONFIG_IWL4965_HT */
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* rs_get_supported_rates - get the available rates
|
|
*
|
|
* if management frame or broadcast frame only return
|
|
* basic available rates.
|
|
*
|
|
*/
|
|
static void rs_get_supported_rates(struct iwl4965_lq_sta *lq_sta,
|
|
struct ieee80211_hdr *hdr,
|
|
enum iwl4965_table_type rate_type,
|
|
u16 *data_rate)
|
|
{
|
|
if (is_legacy(rate_type))
|
|
*data_rate = lq_sta->active_rate;
|
|
else {
|
|
if (is_siso(rate_type))
|
|
*data_rate = lq_sta->active_siso_rate;
|
|
else
|
|
*data_rate = lq_sta->active_mimo_rate;
|
|
}
|
|
|
|
if (hdr && is_multicast_ether_addr(hdr->addr1) &&
|
|
lq_sta->active_rate_basic) {
|
|
*data_rate = lq_sta->active_rate_basic;
|
|
}
|
|
}
|
|
|
|
static u16 rs_get_adjacent_rate(u8 index, u16 rate_mask, int rate_type)
|
|
{
|
|
u8 high = IWL_RATE_INVALID;
|
|
u8 low = IWL_RATE_INVALID;
|
|
|
|
/* 802.11A or ht walks to the next literal adjacent rate in
|
|
* the rate table */
|
|
if (is_a_band(rate_type) || !is_legacy(rate_type)) {
|
|
int i;
|
|
u32 mask;
|
|
|
|
/* Find the previous rate that is in the rate mask */
|
|
i = index - 1;
|
|
for (mask = (1 << i); i >= 0; i--, mask >>= 1) {
|
|
if (rate_mask & mask) {
|
|
low = i;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Find the next rate that is in the rate mask */
|
|
i = index + 1;
|
|
for (mask = (1 << i); i < IWL_RATE_COUNT; i++, mask <<= 1) {
|
|
if (rate_mask & mask) {
|
|
high = i;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return (high << 8) | low;
|
|
}
|
|
|
|
low = index;
|
|
while (low != IWL_RATE_INVALID) {
|
|
low = iwl4965_rates[low].prev_rs;
|
|
if (low == IWL_RATE_INVALID)
|
|
break;
|
|
if (rate_mask & (1 << low))
|
|
break;
|
|
IWL_DEBUG_RATE("Skipping masked lower rate: %d\n", low);
|
|
}
|
|
|
|
high = index;
|
|
while (high != IWL_RATE_INVALID) {
|
|
high = iwl4965_rates[high].next_rs;
|
|
if (high == IWL_RATE_INVALID)
|
|
break;
|
|
if (rate_mask & (1 << high))
|
|
break;
|
|
IWL_DEBUG_RATE("Skipping masked higher rate: %d\n", high);
|
|
}
|
|
|
|
return (high << 8) | low;
|
|
}
|
|
|
|
static void rs_get_lower_rate(struct iwl4965_lq_sta *lq_sta,
|
|
struct iwl4965_scale_tbl_info *tbl, u8 scale_index,
|
|
u8 ht_possible, struct iwl4965_rate *mcs_rate)
|
|
{
|
|
s32 low;
|
|
u16 rate_mask;
|
|
u16 high_low;
|
|
u8 switch_to_legacy = 0;
|
|
u8 is_green = lq_sta->is_green;
|
|
|
|
/* check if we need to switch from HT to legacy rates.
|
|
* assumption is that mandatory rates (1Mbps or 6Mbps)
|
|
* are always supported (spec demand) */
|
|
if (!is_legacy(tbl->lq_type) && (!ht_possible || !scale_index)) {
|
|
switch_to_legacy = 1;
|
|
scale_index = rs_ht_to_legacy[scale_index];
|
|
if (lq_sta->band == IEEE80211_BAND_5GHZ)
|
|
tbl->lq_type = LQ_A;
|
|
else
|
|
tbl->lq_type = LQ_G;
|
|
|
|
if ((tbl->antenna_type == ANT_BOTH) ||
|
|
(tbl->antenna_type == ANT_NONE))
|
|
tbl->antenna_type = ANT_MAIN;
|
|
|
|
tbl->is_fat = 0;
|
|
tbl->is_SGI = 0;
|
|
}
|
|
|
|
rs_get_supported_rates(lq_sta, NULL, tbl->lq_type, &rate_mask);
|
|
|
|
/* Mask with station rate restriction */
|
|
if (is_legacy(tbl->lq_type)) {
|
|
/* supp_rates has no CCK bits in A mode */
|
|
if (lq_sta->band == IEEE80211_BAND_5GHZ)
|
|
rate_mask = (u16)(rate_mask &
|
|
(lq_sta->supp_rates << IWL_FIRST_OFDM_RATE));
|
|
else
|
|
rate_mask = (u16)(rate_mask & lq_sta->supp_rates);
|
|
}
|
|
|
|
/* If we switched from HT to legacy, check current rate */
|
|
if (switch_to_legacy && (rate_mask & (1 << scale_index))) {
|
|
rs_mcs_from_tbl(mcs_rate, tbl, scale_index, is_green);
|
|
return;
|
|
}
|
|
|
|
high_low = rs_get_adjacent_rate(scale_index, rate_mask, tbl->lq_type);
|
|
low = high_low & 0xff;
|
|
|
|
if (low != IWL_RATE_INVALID)
|
|
rs_mcs_from_tbl(mcs_rate, tbl, low, is_green);
|
|
else
|
|
rs_mcs_from_tbl(mcs_rate, tbl, scale_index, is_green);
|
|
}
|
|
|
|
/*
|
|
* mac80211 sends us Tx status
|
|
*/
|
|
static void rs_tx_status(void *priv_rate, struct net_device *dev,
|
|
struct sk_buff *skb,
|
|
struct ieee80211_tx_status *tx_resp)
|
|
{
|
|
int status;
|
|
u8 retries;
|
|
int rs_index, index = 0;
|
|
struct iwl4965_lq_sta *lq_sta;
|
|
struct iwl4965_link_quality_cmd *table;
|
|
struct sta_info *sta;
|
|
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
|
|
struct iwl4965_priv *priv = (struct iwl4965_priv *)priv_rate;
|
|
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
|
|
struct iwl4965_rate_scale_data *window = NULL;
|
|
struct iwl4965_rate_scale_data *search_win = NULL;
|
|
struct iwl4965_rate tx_mcs;
|
|
struct iwl4965_scale_tbl_info tbl_type;
|
|
struct iwl4965_scale_tbl_info *curr_tbl, *search_tbl;
|
|
u8 active_index = 0;
|
|
u16 fc = le16_to_cpu(hdr->frame_control);
|
|
s32 tpt = 0;
|
|
|
|
IWL_DEBUG_RATE_LIMIT("get frame ack response, update rate scale window\n");
|
|
|
|
if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1))
|
|
return;
|
|
|
|
/* This packet was aggregated but doesn't carry rate scale info */
|
|
if ((tx_resp->control.flags & IEEE80211_TXCTL_AMPDU) &&
|
|
!(tx_resp->flags & IEEE80211_TX_STATUS_AMPDU))
|
|
return;
|
|
|
|
retries = tx_resp->retry_count;
|
|
|
|
if (retries > 15)
|
|
retries = 15;
|
|
|
|
|
|
sta = sta_info_get(local, hdr->addr1);
|
|
|
|
if (!sta || !sta->rate_ctrl_priv) {
|
|
if (sta)
|
|
sta_info_put(sta);
|
|
return;
|
|
}
|
|
|
|
lq_sta = (struct iwl4965_lq_sta *)sta->rate_ctrl_priv;
|
|
|
|
if (!priv->lq_mngr.lq_ready)
|
|
return;
|
|
|
|
if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) &&
|
|
!lq_sta->ibss_sta_added)
|
|
return;
|
|
|
|
table = &lq_sta->lq;
|
|
active_index = lq_sta->active_tbl;
|
|
|
|
/* Get mac80211 antenna info */
|
|
lq_sta->antenna =
|
|
(lq_sta->valid_antenna & local->hw.conf.antenna_sel_tx);
|
|
if (!lq_sta->antenna)
|
|
lq_sta->antenna = lq_sta->valid_antenna;
|
|
|
|
/* Ignore mac80211 antenna info for now */
|
|
lq_sta->antenna = lq_sta->valid_antenna;
|
|
|
|
curr_tbl = &(lq_sta->lq_info[active_index]);
|
|
search_tbl = &(lq_sta->lq_info[(1 - active_index)]);
|
|
window = (struct iwl4965_rate_scale_data *)
|
|
&(curr_tbl->win[0]);
|
|
search_win = (struct iwl4965_rate_scale_data *)
|
|
&(search_tbl->win[0]);
|
|
|
|
tx_mcs.rate_n_flags = tx_resp->control.tx_rate->hw_value;
|
|
|
|
rs_get_tbl_info_from_mcs(&tx_mcs, priv->band,
|
|
&tbl_type, &rs_index);
|
|
if ((rs_index < 0) || (rs_index >= IWL_RATE_COUNT)) {
|
|
IWL_DEBUG_RATE("bad rate index at: %d rate 0x%X\n",
|
|
rs_index, tx_mcs.rate_n_flags);
|
|
sta_info_put(sta);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Ignore this Tx frame response if its initial rate doesn't match
|
|
* that of latest Link Quality command. There may be stragglers
|
|
* from a previous Link Quality command, but we're no longer interested
|
|
* in those; they're either from the "active" mode while we're trying
|
|
* to check "search" mode, or a prior "search" mode after we've moved
|
|
* to a new "search" mode (which might become the new "active" mode).
|
|
*/
|
|
if (retries &&
|
|
(tx_mcs.rate_n_flags !=
|
|
le32_to_cpu(table->rs_table[0].rate_n_flags))) {
|
|
IWL_DEBUG_RATE("initial rate does not match 0x%x 0x%x\n",
|
|
tx_mcs.rate_n_flags,
|
|
le32_to_cpu(table->rs_table[0].rate_n_flags));
|
|
sta_info_put(sta);
|
|
return;
|
|
}
|
|
|
|
/* Update frame history window with "failure" for each Tx retry. */
|
|
while (retries) {
|
|
/* Look up the rate and other info used for each tx attempt.
|
|
* Each tx attempt steps one entry deeper in the rate table. */
|
|
tx_mcs.rate_n_flags =
|
|
le32_to_cpu(table->rs_table[index].rate_n_flags);
|
|
rs_get_tbl_info_from_mcs(&tx_mcs, priv->band,
|
|
&tbl_type, &rs_index);
|
|
|
|
/* If type matches "search" table,
|
|
* add failure to "search" history */
|
|
if ((tbl_type.lq_type == search_tbl->lq_type) &&
|
|
(tbl_type.antenna_type == search_tbl->antenna_type) &&
|
|
(tbl_type.is_SGI == search_tbl->is_SGI)) {
|
|
if (search_tbl->expected_tpt)
|
|
tpt = search_tbl->expected_tpt[rs_index];
|
|
else
|
|
tpt = 0;
|
|
rs_collect_tx_data(search_win, rs_index, tpt, 1, 0);
|
|
|
|
/* Else if type matches "current/active" table,
|
|
* add failure to "current/active" history */
|
|
} else if ((tbl_type.lq_type == curr_tbl->lq_type) &&
|
|
(tbl_type.antenna_type == curr_tbl->antenna_type) &&
|
|
(tbl_type.is_SGI == curr_tbl->is_SGI)) {
|
|
if (curr_tbl->expected_tpt)
|
|
tpt = curr_tbl->expected_tpt[rs_index];
|
|
else
|
|
tpt = 0;
|
|
rs_collect_tx_data(window, rs_index, tpt, 1, 0);
|
|
}
|
|
|
|
/* If not searching for a new mode, increment failed counter
|
|
* ... this helps determine when to start searching again */
|
|
if (lq_sta->stay_in_tbl)
|
|
lq_sta->total_failed++;
|
|
--retries;
|
|
index++;
|
|
|
|
}
|
|
|
|
/*
|
|
* Find (by rate) the history window to update with final Tx attempt;
|
|
* if Tx was successful first try, use original rate,
|
|
* else look up the rate that was, finally, successful.
|
|
*/
|
|
if (!tx_resp->retry_count)
|
|
tx_mcs.rate_n_flags = tx_resp->control.tx_rate->hw_value;
|
|
else
|
|
tx_mcs.rate_n_flags =
|
|
le32_to_cpu(table->rs_table[index].rate_n_flags);
|
|
|
|
rs_get_tbl_info_from_mcs(&tx_mcs, priv->band,
|
|
&tbl_type, &rs_index);
|
|
|
|
/* Update frame history window with "success" if Tx got ACKed ... */
|
|
if (tx_resp->flags & IEEE80211_TX_STATUS_ACK)
|
|
status = 1;
|
|
else
|
|
status = 0;
|
|
|
|
/* If type matches "search" table,
|
|
* add final tx status to "search" history */
|
|
if ((tbl_type.lq_type == search_tbl->lq_type) &&
|
|
(tbl_type.antenna_type == search_tbl->antenna_type) &&
|
|
(tbl_type.is_SGI == search_tbl->is_SGI)) {
|
|
if (search_tbl->expected_tpt)
|
|
tpt = search_tbl->expected_tpt[rs_index];
|
|
else
|
|
tpt = 0;
|
|
if (tx_resp->control.flags & IEEE80211_TXCTL_AMPDU)
|
|
rs_collect_tx_data(search_win, rs_index, tpt,
|
|
tx_resp->ampdu_ack_len,
|
|
tx_resp->ampdu_ack_map);
|
|
else
|
|
rs_collect_tx_data(search_win, rs_index, tpt,
|
|
1, status);
|
|
/* Else if type matches "current/active" table,
|
|
* add final tx status to "current/active" history */
|
|
} else if ((tbl_type.lq_type == curr_tbl->lq_type) &&
|
|
(tbl_type.antenna_type == curr_tbl->antenna_type) &&
|
|
(tbl_type.is_SGI == curr_tbl->is_SGI)) {
|
|
if (curr_tbl->expected_tpt)
|
|
tpt = curr_tbl->expected_tpt[rs_index];
|
|
else
|
|
tpt = 0;
|
|
if (tx_resp->control.flags & IEEE80211_TXCTL_AMPDU)
|
|
rs_collect_tx_data(window, rs_index, tpt,
|
|
tx_resp->ampdu_ack_len,
|
|
tx_resp->ampdu_ack_map);
|
|
else
|
|
rs_collect_tx_data(window, rs_index, tpt,
|
|
1, status);
|
|
}
|
|
|
|
/* If not searching for new mode, increment success/failed counter
|
|
* ... these help determine when to start searching again */
|
|
if (lq_sta->stay_in_tbl) {
|
|
if (tx_resp->control.flags & IEEE80211_TXCTL_AMPDU) {
|
|
lq_sta->total_success += tx_resp->ampdu_ack_map;
|
|
lq_sta->total_failed +=
|
|
(tx_resp->ampdu_ack_len - tx_resp->ampdu_ack_map);
|
|
} else {
|
|
if (status)
|
|
lq_sta->total_success++;
|
|
else
|
|
lq_sta->total_failed++;
|
|
}
|
|
}
|
|
|
|
/* See if there's a better rate or modulation mode to try. */
|
|
rs_rate_scale_perform(priv, dev, hdr, sta);
|
|
sta_info_put(sta);
|
|
return;
|
|
}
|
|
|
|
static u8 rs_is_ant_connected(u8 valid_antenna,
|
|
enum iwl4965_antenna_type antenna_type)
|
|
{
|
|
if (antenna_type == ANT_AUX)
|
|
return ((valid_antenna & 0x2) ? 1:0);
|
|
else if (antenna_type == ANT_MAIN)
|
|
return ((valid_antenna & 0x1) ? 1:0);
|
|
else if (antenna_type == ANT_BOTH)
|
|
return ((valid_antenna & 0x3) == 0x3);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static u8 rs_is_other_ant_connected(u8 valid_antenna,
|
|
enum iwl4965_antenna_type antenna_type)
|
|
{
|
|
if (antenna_type == ANT_AUX)
|
|
return rs_is_ant_connected(valid_antenna, ANT_MAIN);
|
|
else
|
|
return rs_is_ant_connected(valid_antenna, ANT_AUX);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Begin a period of staying with a selected modulation mode.
|
|
* Set "stay_in_tbl" flag to prevent any mode switches.
|
|
* Set frame tx success limits according to legacy vs. high-throughput,
|
|
* and reset overall (spanning all rates) tx success history statistics.
|
|
* These control how long we stay using same modulation mode before
|
|
* searching for a new mode.
|
|
*/
|
|
static void rs_set_stay_in_table(u8 is_legacy,
|
|
struct iwl4965_lq_sta *lq_sta)
|
|
{
|
|
IWL_DEBUG_HT("we are staying in the same table\n");
|
|
lq_sta->stay_in_tbl = 1; /* only place this gets set */
|
|
if (is_legacy) {
|
|
lq_sta->table_count_limit = IWL_LEGACY_TABLE_COUNT;
|
|
lq_sta->max_failure_limit = IWL_LEGACY_FAILURE_LIMIT;
|
|
lq_sta->max_success_limit = IWL_LEGACY_SUCCESS_LIMIT;
|
|
} else {
|
|
lq_sta->table_count_limit = IWL_NONE_LEGACY_TABLE_COUNT;
|
|
lq_sta->max_failure_limit = IWL_NONE_LEGACY_FAILURE_LIMIT;
|
|
lq_sta->max_success_limit = IWL_NONE_LEGACY_SUCCESS_LIMIT;
|
|
}
|
|
lq_sta->table_count = 0;
|
|
lq_sta->total_failed = 0;
|
|
lq_sta->total_success = 0;
|
|
}
|
|
|
|
/*
|
|
* Find correct throughput table for given mode of modulation
|
|
*/
|
|
static void rs_get_expected_tpt_table(struct iwl4965_lq_sta *lq_sta,
|
|
struct iwl4965_scale_tbl_info *tbl)
|
|
{
|
|
if (is_legacy(tbl->lq_type)) {
|
|
if (!is_a_band(tbl->lq_type))
|
|
tbl->expected_tpt = expected_tpt_G;
|
|
else
|
|
tbl->expected_tpt = expected_tpt_A;
|
|
} else if (is_siso(tbl->lq_type)) {
|
|
if (tbl->is_fat && !lq_sta->is_dup)
|
|
if (tbl->is_SGI)
|
|
tbl->expected_tpt = expected_tpt_siso40MHzSGI;
|
|
else
|
|
tbl->expected_tpt = expected_tpt_siso40MHz;
|
|
else if (tbl->is_SGI)
|
|
tbl->expected_tpt = expected_tpt_siso20MHzSGI;
|
|
else
|
|
tbl->expected_tpt = expected_tpt_siso20MHz;
|
|
|
|
} else if (is_mimo(tbl->lq_type)) {
|
|
if (tbl->is_fat && !lq_sta->is_dup)
|
|
if (tbl->is_SGI)
|
|
tbl->expected_tpt = expected_tpt_mimo40MHzSGI;
|
|
else
|
|
tbl->expected_tpt = expected_tpt_mimo40MHz;
|
|
else if (tbl->is_SGI)
|
|
tbl->expected_tpt = expected_tpt_mimo20MHzSGI;
|
|
else
|
|
tbl->expected_tpt = expected_tpt_mimo20MHz;
|
|
} else
|
|
tbl->expected_tpt = expected_tpt_G;
|
|
}
|
|
|
|
#ifdef CONFIG_IWL4965_HT
|
|
/*
|
|
* Find starting rate for new "search" high-throughput mode of modulation.
|
|
* Goal is to find lowest expected rate (under perfect conditions) that is
|
|
* above the current measured throughput of "active" mode, to give new mode
|
|
* a fair chance to prove itself without too many challenges.
|
|
*
|
|
* This gets called when transitioning to more aggressive modulation
|
|
* (i.e. legacy to SISO or MIMO, or SISO to MIMO), as well as less aggressive
|
|
* (i.e. MIMO to SISO). When moving to MIMO, bit rate will typically need
|
|
* to decrease to match "active" throughput. When moving from MIMO to SISO,
|
|
* bit rate will typically need to increase, but not if performance was bad.
|
|
*/
|
|
static s32 rs_get_best_rate(struct iwl4965_priv *priv,
|
|
struct iwl4965_lq_sta *lq_sta,
|
|
struct iwl4965_scale_tbl_info *tbl, /* "search" */
|
|
u16 rate_mask, s8 index, s8 rate)
|
|
{
|
|
/* "active" values */
|
|
struct iwl4965_scale_tbl_info *active_tbl =
|
|
&(lq_sta->lq_info[lq_sta->active_tbl]);
|
|
s32 active_sr = active_tbl->win[index].success_ratio;
|
|
s32 active_tpt = active_tbl->expected_tpt[index];
|
|
|
|
/* expected "search" throughput */
|
|
s32 *tpt_tbl = tbl->expected_tpt;
|
|
|
|
s32 new_rate, high, low, start_hi;
|
|
u16 high_low;
|
|
|
|
new_rate = high = low = start_hi = IWL_RATE_INVALID;
|
|
|
|
for (; ;) {
|
|
high_low = rs_get_adjacent_rate(rate, rate_mask, tbl->lq_type);
|
|
|
|
low = high_low & 0xff;
|
|
high = (high_low >> 8) & 0xff;
|
|
|
|
/*
|
|
* Lower the "search" bit rate, to give new "search" mode
|
|
* approximately the same throughput as "active" if:
|
|
*
|
|
* 1) "Active" mode has been working modestly well (but not
|
|
* great), and expected "search" throughput (under perfect
|
|
* conditions) at candidate rate is above the actual
|
|
* measured "active" throughput (but less than expected
|
|
* "active" throughput under perfect conditions).
|
|
* OR
|
|
* 2) "Active" mode has been working perfectly or very well
|
|
* and expected "search" throughput (under perfect
|
|
* conditions) at candidate rate is above expected
|
|
* "active" throughput (under perfect conditions).
|
|
*/
|
|
if ((((100 * tpt_tbl[rate]) > lq_sta->last_tpt) &&
|
|
((active_sr > IWL_RATE_DECREASE_TH) &&
|
|
(active_sr <= IWL_RATE_HIGH_TH) &&
|
|
(tpt_tbl[rate] <= active_tpt))) ||
|
|
((active_sr >= IWL_RATE_SCALE_SWITCH) &&
|
|
(tpt_tbl[rate] > active_tpt))) {
|
|
|
|
/* (2nd or later pass)
|
|
* If we've already tried to raise the rate, and are
|
|
* now trying to lower it, use the higher rate. */
|
|
if (start_hi != IWL_RATE_INVALID) {
|
|
new_rate = start_hi;
|
|
break;
|
|
}
|
|
|
|
new_rate = rate;
|
|
|
|
/* Loop again with lower rate */
|
|
if (low != IWL_RATE_INVALID)
|
|
rate = low;
|
|
|
|
/* Lower rate not available, use the original */
|
|
else
|
|
break;
|
|
|
|
/* Else try to raise the "search" rate to match "active" */
|
|
} else {
|
|
/* (2nd or later pass)
|
|
* If we've already tried to lower the rate, and are
|
|
* now trying to raise it, use the lower rate. */
|
|
if (new_rate != IWL_RATE_INVALID)
|
|
break;
|
|
|
|
/* Loop again with higher rate */
|
|
else if (high != IWL_RATE_INVALID) {
|
|
start_hi = high;
|
|
rate = high;
|
|
|
|
/* Higher rate not available, use the original */
|
|
} else {
|
|
new_rate = rate;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
return new_rate;
|
|
}
|
|
#endif /* CONFIG_IWL4965_HT */
|
|
|
|
static inline u8 rs_is_both_ant_supp(u8 valid_antenna)
|
|
{
|
|
return (rs_is_ant_connected(valid_antenna, ANT_BOTH));
|
|
}
|
|
|
|
/*
|
|
* Set up search table for MIMO
|
|
*/
|
|
static int rs_switch_to_mimo(struct iwl4965_priv *priv,
|
|
struct iwl4965_lq_sta *lq_sta,
|
|
struct ieee80211_conf *conf,
|
|
struct sta_info *sta,
|
|
struct iwl4965_scale_tbl_info *tbl, int index)
|
|
{
|
|
#ifdef CONFIG_IWL4965_HT
|
|
u16 rate_mask;
|
|
s32 rate;
|
|
s8 is_green = lq_sta->is_green;
|
|
|
|
if (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) ||
|
|
!sta->ht_info.ht_supported)
|
|
return -1;
|
|
|
|
IWL_DEBUG_HT("LQ: try to switch to MIMO\n");
|
|
tbl->lq_type = LQ_MIMO;
|
|
rs_get_supported_rates(lq_sta, NULL, tbl->lq_type,
|
|
&rate_mask);
|
|
|
|
if (priv->current_ht_config.tx_mimo_ps_mode == IWL_MIMO_PS_STATIC)
|
|
return -1;
|
|
|
|
/* Need both Tx chains/antennas to support MIMO */
|
|
if (!rs_is_both_ant_supp(lq_sta->antenna))
|
|
return -1;
|
|
|
|
tbl->is_dup = lq_sta->is_dup;
|
|
tbl->action = 0;
|
|
if (priv->current_ht_config.supported_chan_width
|
|
== IWL_CHANNEL_WIDTH_40MHZ)
|
|
tbl->is_fat = 1;
|
|
else
|
|
tbl->is_fat = 0;
|
|
|
|
if (tbl->is_fat) {
|
|
if (priv->current_ht_config.sgf & HT_SHORT_GI_40MHZ_ONLY)
|
|
tbl->is_SGI = 1;
|
|
else
|
|
tbl->is_SGI = 0;
|
|
} else if (priv->current_ht_config.sgf & HT_SHORT_GI_20MHZ_ONLY)
|
|
tbl->is_SGI = 1;
|
|
else
|
|
tbl->is_SGI = 0;
|
|
|
|
rs_get_expected_tpt_table(lq_sta, tbl);
|
|
|
|
rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index, index);
|
|
|
|
IWL_DEBUG_HT("LQ: MIMO best rate %d mask %X\n", rate, rate_mask);
|
|
if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask))
|
|
return -1;
|
|
rs_mcs_from_tbl(&tbl->current_rate, tbl, rate, is_green);
|
|
|
|
IWL_DEBUG_HT("LQ: Switch to new mcs %X index is green %X\n",
|
|
tbl->current_rate.rate_n_flags, is_green);
|
|
return 0;
|
|
#else
|
|
return -1;
|
|
#endif /*CONFIG_IWL4965_HT */
|
|
}
|
|
|
|
/*
|
|
* Set up search table for SISO
|
|
*/
|
|
static int rs_switch_to_siso(struct iwl4965_priv *priv,
|
|
struct iwl4965_lq_sta *lq_sta,
|
|
struct ieee80211_conf *conf,
|
|
struct sta_info *sta,
|
|
struct iwl4965_scale_tbl_info *tbl, int index)
|
|
{
|
|
#ifdef CONFIG_IWL4965_HT
|
|
u16 rate_mask;
|
|
u8 is_green = lq_sta->is_green;
|
|
s32 rate;
|
|
|
|
IWL_DEBUG_HT("LQ: try to switch to SISO\n");
|
|
if (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) ||
|
|
!sta->ht_info.ht_supported)
|
|
return -1;
|
|
|
|
tbl->is_dup = lq_sta->is_dup;
|
|
tbl->lq_type = LQ_SISO;
|
|
tbl->action = 0;
|
|
rs_get_supported_rates(lq_sta, NULL, tbl->lq_type,
|
|
&rate_mask);
|
|
|
|
if (priv->current_ht_config.supported_chan_width
|
|
== IWL_CHANNEL_WIDTH_40MHZ)
|
|
tbl->is_fat = 1;
|
|
else
|
|
tbl->is_fat = 0;
|
|
|
|
if (tbl->is_fat) {
|
|
if (priv->current_ht_config.sgf & HT_SHORT_GI_40MHZ_ONLY)
|
|
tbl->is_SGI = 1;
|
|
else
|
|
tbl->is_SGI = 0;
|
|
} else if (priv->current_ht_config.sgf & HT_SHORT_GI_20MHZ_ONLY)
|
|
tbl->is_SGI = 1;
|
|
else
|
|
tbl->is_SGI = 0;
|
|
|
|
if (is_green)
|
|
tbl->is_SGI = 0;
|
|
|
|
rs_get_expected_tpt_table(lq_sta, tbl);
|
|
rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index, index);
|
|
|
|
IWL_DEBUG_HT("LQ: get best rate %d mask %X\n", rate, rate_mask);
|
|
if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) {
|
|
IWL_DEBUG_HT("can not switch with index %d rate mask %x\n",
|
|
rate, rate_mask);
|
|
return -1;
|
|
}
|
|
rs_mcs_from_tbl(&tbl->current_rate, tbl, rate, is_green);
|
|
IWL_DEBUG_HT("LQ: Switch to new mcs %X index is green %X\n",
|
|
tbl->current_rate.rate_n_flags, is_green);
|
|
return 0;
|
|
#else
|
|
return -1;
|
|
|
|
#endif /*CONFIG_IWL4965_HT */
|
|
}
|
|
|
|
/*
|
|
* Try to switch to new modulation mode from legacy
|
|
*/
|
|
static int rs_move_legacy_other(struct iwl4965_priv *priv,
|
|
struct iwl4965_lq_sta *lq_sta,
|
|
struct ieee80211_conf *conf,
|
|
struct sta_info *sta,
|
|
int index)
|
|
{
|
|
int ret = 0;
|
|
struct iwl4965_scale_tbl_info *tbl =
|
|
&(lq_sta->lq_info[lq_sta->active_tbl]);
|
|
struct iwl4965_scale_tbl_info *search_tbl =
|
|
&(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
|
|
struct iwl4965_rate_scale_data *window = &(tbl->win[index]);
|
|
u32 sz = (sizeof(struct iwl4965_scale_tbl_info) -
|
|
(sizeof(struct iwl4965_rate_scale_data) * IWL_RATE_COUNT));
|
|
u8 start_action = tbl->action;
|
|
|
|
for (; ;) {
|
|
switch (tbl->action) {
|
|
case IWL_LEGACY_SWITCH_ANTENNA:
|
|
IWL_DEBUG_HT("LQ Legacy switch Antenna\n");
|
|
|
|
search_tbl->lq_type = LQ_NONE;
|
|
lq_sta->action_counter++;
|
|
|
|
/* Don't change antenna if success has been great */
|
|
if (window->success_ratio >= IWL_RS_GOOD_RATIO)
|
|
break;
|
|
|
|
/* Don't change antenna if other one is not connected */
|
|
if (!rs_is_other_ant_connected(lq_sta->antenna,
|
|
tbl->antenna_type))
|
|
break;
|
|
|
|
/* Set up search table to try other antenna */
|
|
memcpy(search_tbl, tbl, sz);
|
|
|
|
rs_toggle_antenna(&(search_tbl->current_rate),
|
|
search_tbl);
|
|
rs_get_expected_tpt_table(lq_sta, search_tbl);
|
|
lq_sta->search_better_tbl = 1;
|
|
goto out;
|
|
|
|
case IWL_LEGACY_SWITCH_SISO:
|
|
IWL_DEBUG_HT("LQ: Legacy switch to SISO\n");
|
|
|
|
/* Set up search table to try SISO */
|
|
memcpy(search_tbl, tbl, sz);
|
|
search_tbl->lq_type = LQ_SISO;
|
|
search_tbl->is_SGI = 0;
|
|
search_tbl->is_fat = 0;
|
|
ret = rs_switch_to_siso(priv, lq_sta, conf, sta,
|
|
search_tbl, index);
|
|
if (!ret) {
|
|
lq_sta->search_better_tbl = 1;
|
|
lq_sta->action_counter = 0;
|
|
goto out;
|
|
}
|
|
|
|
break;
|
|
case IWL_LEGACY_SWITCH_MIMO:
|
|
IWL_DEBUG_HT("LQ: Legacy switch MIMO\n");
|
|
|
|
/* Set up search table to try MIMO */
|
|
memcpy(search_tbl, tbl, sz);
|
|
search_tbl->lq_type = LQ_MIMO;
|
|
search_tbl->is_SGI = 0;
|
|
search_tbl->is_fat = 0;
|
|
search_tbl->antenna_type = ANT_BOTH;
|
|
ret = rs_switch_to_mimo(priv, lq_sta, conf, sta,
|
|
search_tbl, index);
|
|
if (!ret) {
|
|
lq_sta->search_better_tbl = 1;
|
|
lq_sta->action_counter = 0;
|
|
goto out;
|
|
}
|
|
break;
|
|
}
|
|
tbl->action++;
|
|
if (tbl->action > IWL_LEGACY_SWITCH_MIMO)
|
|
tbl->action = IWL_LEGACY_SWITCH_ANTENNA;
|
|
|
|
if (tbl->action == start_action)
|
|
break;
|
|
|
|
}
|
|
return 0;
|
|
|
|
out:
|
|
tbl->action++;
|
|
if (tbl->action > IWL_LEGACY_SWITCH_MIMO)
|
|
tbl->action = IWL_LEGACY_SWITCH_ANTENNA;
|
|
return 0;
|
|
|
|
}
|
|
|
|
/*
|
|
* Try to switch to new modulation mode from SISO
|
|
*/
|
|
static int rs_move_siso_to_other(struct iwl4965_priv *priv,
|
|
struct iwl4965_lq_sta *lq_sta,
|
|
struct ieee80211_conf *conf,
|
|
struct sta_info *sta,
|
|
int index)
|
|
{
|
|
int ret;
|
|
u8 is_green = lq_sta->is_green;
|
|
struct iwl4965_scale_tbl_info *tbl =
|
|
&(lq_sta->lq_info[lq_sta->active_tbl]);
|
|
struct iwl4965_scale_tbl_info *search_tbl =
|
|
&(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
|
|
struct iwl4965_rate_scale_data *window = &(tbl->win[index]);
|
|
u32 sz = (sizeof(struct iwl4965_scale_tbl_info) -
|
|
(sizeof(struct iwl4965_rate_scale_data) * IWL_RATE_COUNT));
|
|
u8 start_action = tbl->action;
|
|
|
|
for (;;) {
|
|
lq_sta->action_counter++;
|
|
switch (tbl->action) {
|
|
case IWL_SISO_SWITCH_ANTENNA:
|
|
IWL_DEBUG_HT("LQ: SISO SWITCH ANTENNA SISO\n");
|
|
search_tbl->lq_type = LQ_NONE;
|
|
if (window->success_ratio >= IWL_RS_GOOD_RATIO)
|
|
break;
|
|
if (!rs_is_other_ant_connected(lq_sta->antenna,
|
|
tbl->antenna_type))
|
|
break;
|
|
|
|
memcpy(search_tbl, tbl, sz);
|
|
search_tbl->action = IWL_SISO_SWITCH_MIMO;
|
|
rs_toggle_antenna(&(search_tbl->current_rate),
|
|
search_tbl);
|
|
lq_sta->search_better_tbl = 1;
|
|
|
|
goto out;
|
|
|
|
case IWL_SISO_SWITCH_MIMO:
|
|
IWL_DEBUG_HT("LQ: SISO SWITCH TO MIMO FROM SISO\n");
|
|
memcpy(search_tbl, tbl, sz);
|
|
search_tbl->lq_type = LQ_MIMO;
|
|
search_tbl->is_SGI = 0;
|
|
search_tbl->is_fat = 0;
|
|
search_tbl->antenna_type = ANT_BOTH;
|
|
ret = rs_switch_to_mimo(priv, lq_sta, conf, sta,
|
|
search_tbl, index);
|
|
if (!ret) {
|
|
lq_sta->search_better_tbl = 1;
|
|
goto out;
|
|
}
|
|
break;
|
|
case IWL_SISO_SWITCH_GI:
|
|
IWL_DEBUG_HT("LQ: SISO SWITCH TO GI\n");
|
|
|
|
memcpy(search_tbl, tbl, sz);
|
|
search_tbl->action = 0;
|
|
if (search_tbl->is_SGI)
|
|
search_tbl->is_SGI = 0;
|
|
else if (!is_green)
|
|
search_tbl->is_SGI = 1;
|
|
else
|
|
break;
|
|
lq_sta->search_better_tbl = 1;
|
|
if ((tbl->lq_type == LQ_SISO) &&
|
|
(tbl->is_SGI)) {
|
|
s32 tpt = lq_sta->last_tpt / 100;
|
|
if (((!tbl->is_fat) &&
|
|
(tpt >= expected_tpt_siso20MHz[index])) ||
|
|
((tbl->is_fat) &&
|
|
(tpt >= expected_tpt_siso40MHz[index])))
|
|
lq_sta->search_better_tbl = 0;
|
|
}
|
|
rs_get_expected_tpt_table(lq_sta, search_tbl);
|
|
rs_mcs_from_tbl(&search_tbl->current_rate,
|
|
search_tbl, index, is_green);
|
|
goto out;
|
|
}
|
|
tbl->action++;
|
|
if (tbl->action > IWL_SISO_SWITCH_GI)
|
|
tbl->action = IWL_SISO_SWITCH_ANTENNA;
|
|
|
|
if (tbl->action == start_action)
|
|
break;
|
|
}
|
|
return 0;
|
|
|
|
out:
|
|
tbl->action++;
|
|
if (tbl->action > IWL_SISO_SWITCH_GI)
|
|
tbl->action = IWL_SISO_SWITCH_ANTENNA;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Try to switch to new modulation mode from MIMO
|
|
*/
|
|
static int rs_move_mimo_to_other(struct iwl4965_priv *priv,
|
|
struct iwl4965_lq_sta *lq_sta,
|
|
struct ieee80211_conf *conf,
|
|
struct sta_info *sta,
|
|
int index)
|
|
{
|
|
int ret;
|
|
s8 is_green = lq_sta->is_green;
|
|
struct iwl4965_scale_tbl_info *tbl =
|
|
&(lq_sta->lq_info[lq_sta->active_tbl]);
|
|
struct iwl4965_scale_tbl_info *search_tbl =
|
|
&(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
|
|
u32 sz = (sizeof(struct iwl4965_scale_tbl_info) -
|
|
(sizeof(struct iwl4965_rate_scale_data) * IWL_RATE_COUNT));
|
|
u8 start_action = tbl->action;
|
|
|
|
for (;;) {
|
|
lq_sta->action_counter++;
|
|
switch (tbl->action) {
|
|
case IWL_MIMO_SWITCH_ANTENNA_A:
|
|
case IWL_MIMO_SWITCH_ANTENNA_B:
|
|
IWL_DEBUG_HT("LQ: MIMO SWITCH TO SISO\n");
|
|
|
|
|
|
/* Set up new search table for SISO */
|
|
memcpy(search_tbl, tbl, sz);
|
|
search_tbl->lq_type = LQ_SISO;
|
|
search_tbl->is_SGI = 0;
|
|
search_tbl->is_fat = 0;
|
|
if (tbl->action == IWL_MIMO_SWITCH_ANTENNA_A)
|
|
search_tbl->antenna_type = ANT_MAIN;
|
|
else
|
|
search_tbl->antenna_type = ANT_AUX;
|
|
|
|
ret = rs_switch_to_siso(priv, lq_sta, conf, sta,
|
|
search_tbl, index);
|
|
if (!ret) {
|
|
lq_sta->search_better_tbl = 1;
|
|
goto out;
|
|
}
|
|
break;
|
|
|
|
case IWL_MIMO_SWITCH_GI:
|
|
IWL_DEBUG_HT("LQ: MIMO SWITCH TO GI\n");
|
|
|
|
/* Set up new search table for MIMO */
|
|
memcpy(search_tbl, tbl, sz);
|
|
search_tbl->lq_type = LQ_MIMO;
|
|
search_tbl->antenna_type = ANT_BOTH;
|
|
search_tbl->action = 0;
|
|
if (search_tbl->is_SGI)
|
|
search_tbl->is_SGI = 0;
|
|
else
|
|
search_tbl->is_SGI = 1;
|
|
lq_sta->search_better_tbl = 1;
|
|
|
|
/*
|
|
* If active table already uses the fastest possible
|
|
* modulation (dual stream with short guard interval),
|
|
* and it's working well, there's no need to look
|
|
* for a better type of modulation!
|
|
*/
|
|
if ((tbl->lq_type == LQ_MIMO) &&
|
|
(tbl->is_SGI)) {
|
|
s32 tpt = lq_sta->last_tpt / 100;
|
|
if (((!tbl->is_fat) &&
|
|
(tpt >= expected_tpt_mimo20MHz[index])) ||
|
|
((tbl->is_fat) &&
|
|
(tpt >= expected_tpt_mimo40MHz[index])))
|
|
lq_sta->search_better_tbl = 0;
|
|
}
|
|
rs_get_expected_tpt_table(lq_sta, search_tbl);
|
|
rs_mcs_from_tbl(&search_tbl->current_rate,
|
|
search_tbl, index, is_green);
|
|
goto out;
|
|
|
|
}
|
|
tbl->action++;
|
|
if (tbl->action > IWL_MIMO_SWITCH_GI)
|
|
tbl->action = IWL_MIMO_SWITCH_ANTENNA_A;
|
|
|
|
if (tbl->action == start_action)
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
out:
|
|
tbl->action++;
|
|
if (tbl->action > IWL_MIMO_SWITCH_GI)
|
|
tbl->action = IWL_MIMO_SWITCH_ANTENNA_A;
|
|
return 0;
|
|
|
|
}
|
|
|
|
/*
|
|
* Check whether we should continue using same modulation mode, or
|
|
* begin search for a new mode, based on:
|
|
* 1) # tx successes or failures while using this mode
|
|
* 2) # times calling this function
|
|
* 3) elapsed time in this mode (not used, for now)
|
|
*/
|
|
static void rs_stay_in_table(struct iwl4965_lq_sta *lq_sta)
|
|
{
|
|
struct iwl4965_scale_tbl_info *tbl;
|
|
int i;
|
|
int active_tbl;
|
|
int flush_interval_passed = 0;
|
|
|
|
active_tbl = lq_sta->active_tbl;
|
|
|
|
tbl = &(lq_sta->lq_info[active_tbl]);
|
|
|
|
/* If we've been disallowing search, see if we should now allow it */
|
|
if (lq_sta->stay_in_tbl) {
|
|
|
|
/* Elapsed time using current modulation mode */
|
|
if (lq_sta->flush_timer)
|
|
flush_interval_passed =
|
|
time_after(jiffies,
|
|
(unsigned long)(lq_sta->flush_timer +
|
|
IWL_RATE_SCALE_FLUSH_INTVL));
|
|
|
|
/* For now, disable the elapsed time criterion */
|
|
flush_interval_passed = 0;
|
|
|
|
/*
|
|
* Check if we should allow search for new modulation mode.
|
|
* If many frames have failed or succeeded, or we've used
|
|
* this same modulation for a long time, allow search, and
|
|
* reset history stats that keep track of whether we should
|
|
* allow a new search. Also (below) reset all bitmaps and
|
|
* stats in active history.
|
|
*/
|
|
if ((lq_sta->total_failed > lq_sta->max_failure_limit) ||
|
|
(lq_sta->total_success > lq_sta->max_success_limit) ||
|
|
((!lq_sta->search_better_tbl) && (lq_sta->flush_timer)
|
|
&& (flush_interval_passed))) {
|
|
IWL_DEBUG_HT("LQ: stay is expired %d %d %d\n:",
|
|
lq_sta->total_failed,
|
|
lq_sta->total_success,
|
|
flush_interval_passed);
|
|
|
|
/* Allow search for new mode */
|
|
lq_sta->stay_in_tbl = 0; /* only place reset */
|
|
lq_sta->total_failed = 0;
|
|
lq_sta->total_success = 0;
|
|
lq_sta->flush_timer = 0;
|
|
|
|
/*
|
|
* Else if we've used this modulation mode enough repetitions
|
|
* (regardless of elapsed time or success/failure), reset
|
|
* history bitmaps and rate-specific stats for all rates in
|
|
* active table.
|
|
*/
|
|
} else {
|
|
lq_sta->table_count++;
|
|
if (lq_sta->table_count >=
|
|
lq_sta->table_count_limit) {
|
|
lq_sta->table_count = 0;
|
|
|
|
IWL_DEBUG_HT("LQ: stay in table clear win\n");
|
|
for (i = 0; i < IWL_RATE_COUNT; i++)
|
|
rs_rate_scale_clear_window(
|
|
&(tbl->win[i]));
|
|
}
|
|
}
|
|
|
|
/* If transitioning to allow "search", reset all history
|
|
* bitmaps and stats in active table (this will become the new
|
|
* "search" table). */
|
|
if (!lq_sta->stay_in_tbl) {
|
|
for (i = 0; i < IWL_RATE_COUNT; i++)
|
|
rs_rate_scale_clear_window(&(tbl->win[i]));
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Do rate scaling and search for new modulation mode.
|
|
*/
|
|
static void rs_rate_scale_perform(struct iwl4965_priv *priv,
|
|
struct net_device *dev,
|
|
struct ieee80211_hdr *hdr,
|
|
struct sta_info *sta)
|
|
{
|
|
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
|
|
struct ieee80211_hw *hw = local_to_hw(local);
|
|
struct ieee80211_conf *conf = &hw->conf;
|
|
int low = IWL_RATE_INVALID;
|
|
int high = IWL_RATE_INVALID;
|
|
int index;
|
|
int i;
|
|
struct iwl4965_rate_scale_data *window = NULL;
|
|
int current_tpt = IWL_INVALID_VALUE;
|
|
int low_tpt = IWL_INVALID_VALUE;
|
|
int high_tpt = IWL_INVALID_VALUE;
|
|
u32 fail_count;
|
|
s8 scale_action = 0;
|
|
u16 fc, rate_mask;
|
|
u8 update_lq = 0;
|
|
struct iwl4965_lq_sta *lq_sta;
|
|
struct iwl4965_scale_tbl_info *tbl, *tbl1;
|
|
u16 rate_scale_index_msk = 0;
|
|
struct iwl4965_rate mcs_rate;
|
|
u8 is_green = 0;
|
|
u8 active_tbl = 0;
|
|
u8 done_search = 0;
|
|
u16 high_low;
|
|
#ifdef CONFIG_IWL4965_HT
|
|
u8 tid = MAX_TID_COUNT;
|
|
__le16 *qc;
|
|
#endif
|
|
|
|
IWL_DEBUG_RATE("rate scale calculate new rate for skb\n");
|
|
|
|
fc = le16_to_cpu(hdr->frame_control);
|
|
if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1)) {
|
|
/* Send management frames and broadcast/multicast data using
|
|
* lowest rate. */
|
|
/* TODO: this could probably be improved.. */
|
|
return;
|
|
}
|
|
|
|
if (!sta || !sta->rate_ctrl_priv)
|
|
return;
|
|
|
|
if (!priv->lq_mngr.lq_ready) {
|
|
IWL_DEBUG_RATE("still rate scaling not ready\n");
|
|
return;
|
|
}
|
|
lq_sta = (struct iwl4965_lq_sta *)sta->rate_ctrl_priv;
|
|
|
|
#ifdef CONFIG_IWL4965_HT
|
|
qc = ieee80211_get_qos_ctrl(hdr);
|
|
if (qc) {
|
|
tid = (u8)(le16_to_cpu(*qc) & 0xf);
|
|
rs_tl_add_packet(lq_sta, tid);
|
|
}
|
|
#endif
|
|
/*
|
|
* Select rate-scale / modulation-mode table to work with in
|
|
* the rest of this function: "search" if searching for better
|
|
* modulation mode, or "active" if doing rate scaling within a mode.
|
|
*/
|
|
if (!lq_sta->search_better_tbl)
|
|
active_tbl = lq_sta->active_tbl;
|
|
else
|
|
active_tbl = 1 - lq_sta->active_tbl;
|
|
|
|
tbl = &(lq_sta->lq_info[active_tbl]);
|
|
is_green = lq_sta->is_green;
|
|
|
|
/* current tx rate */
|
|
index = sta->last_txrate_idx;
|
|
|
|
IWL_DEBUG_RATE("Rate scale index %d for type %d\n", index,
|
|
tbl->lq_type);
|
|
|
|
/* rates available for this association, and for modulation mode */
|
|
rs_get_supported_rates(lq_sta, hdr, tbl->lq_type,
|
|
&rate_mask);
|
|
|
|
IWL_DEBUG_RATE("mask 0x%04X \n", rate_mask);
|
|
|
|
/* mask with station rate restriction */
|
|
if (is_legacy(tbl->lq_type)) {
|
|
if (lq_sta->band == IEEE80211_BAND_5GHZ)
|
|
/* supp_rates has no CCK bits in A mode */
|
|
rate_scale_index_msk = (u16) (rate_mask &
|
|
(lq_sta->supp_rates << IWL_FIRST_OFDM_RATE));
|
|
else
|
|
rate_scale_index_msk = (u16) (rate_mask &
|
|
lq_sta->supp_rates);
|
|
|
|
} else
|
|
rate_scale_index_msk = rate_mask;
|
|
|
|
if (!rate_scale_index_msk)
|
|
rate_scale_index_msk = rate_mask;
|
|
|
|
/* If current rate is no longer supported on current association,
|
|
* or user changed preferences for rates, find a new supported rate. */
|
|
if (index < 0 || !((1 << index) & rate_scale_index_msk)) {
|
|
index = IWL_INVALID_VALUE;
|
|
update_lq = 1;
|
|
|
|
/* get the highest available rate */
|
|
for (i = 0; i <= IWL_RATE_COUNT; i++) {
|
|
if ((1 << i) & rate_scale_index_msk)
|
|
index = i;
|
|
}
|
|
|
|
if (index == IWL_INVALID_VALUE) {
|
|
IWL_WARNING("Can not find a suitable rate\n");
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* Get expected throughput table and history window for current rate */
|
|
if (!tbl->expected_tpt)
|
|
rs_get_expected_tpt_table(lq_sta, tbl);
|
|
|
|
window = &(tbl->win[index]);
|
|
|
|
/*
|
|
* If there is not enough history to calculate actual average
|
|
* throughput, keep analyzing results of more tx frames, without
|
|
* changing rate or mode (bypass most of the rest of this function).
|
|
* Set up new rate table in uCode only if old rate is not supported
|
|
* in current association (use new rate found above).
|
|
*/
|
|
fail_count = window->counter - window->success_counter;
|
|
if (((fail_count < IWL_RATE_MIN_FAILURE_TH) &&
|
|
(window->success_counter < IWL_RATE_MIN_SUCCESS_TH))
|
|
|| (tbl->expected_tpt == NULL)) {
|
|
IWL_DEBUG_RATE("LQ: still below TH succ %d total %d "
|
|
"for index %d\n",
|
|
window->success_counter, window->counter, index);
|
|
|
|
/* Can't calculate this yet; not enough history */
|
|
window->average_tpt = IWL_INVALID_VALUE;
|
|
|
|
/* Should we stay with this modulation mode,
|
|
* or search for a new one? */
|
|
rs_stay_in_table(lq_sta);
|
|
|
|
/* Set up new rate table in uCode, if needed */
|
|
if (update_lq) {
|
|
rs_mcs_from_tbl(&mcs_rate, tbl, index, is_green);
|
|
rs_fill_link_cmd(lq_sta, &mcs_rate, &lq_sta->lq);
|
|
rs_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC);
|
|
}
|
|
goto out;
|
|
|
|
/* Else we have enough samples; calculate estimate of
|
|
* actual average throughput */
|
|
} else
|
|
window->average_tpt = ((window->success_ratio *
|
|
tbl->expected_tpt[index] + 64) / 128);
|
|
|
|
/* If we are searching for better modulation mode, check success. */
|
|
if (lq_sta->search_better_tbl) {
|
|
int success_limit = IWL_RATE_SCALE_SWITCH;
|
|
|
|
/* If good success, continue using the "search" mode;
|
|
* no need to send new link quality command, since we're
|
|
* continuing to use the setup that we've been trying. */
|
|
if ((window->success_ratio > success_limit) ||
|
|
(window->average_tpt > lq_sta->last_tpt)) {
|
|
if (!is_legacy(tbl->lq_type)) {
|
|
IWL_DEBUG_HT("LQ: we are switching to HT"
|
|
" rate suc %d current tpt %d"
|
|
" old tpt %d\n",
|
|
window->success_ratio,
|
|
window->average_tpt,
|
|
lq_sta->last_tpt);
|
|
lq_sta->enable_counter = 1;
|
|
}
|
|
/* Swap tables; "search" becomes "active" */
|
|
lq_sta->active_tbl = active_tbl;
|
|
current_tpt = window->average_tpt;
|
|
|
|
/* Else poor success; go back to mode in "active" table */
|
|
} else {
|
|
/* Nullify "search" table */
|
|
tbl->lq_type = LQ_NONE;
|
|
|
|
/* Revert to "active" table */
|
|
active_tbl = lq_sta->active_tbl;
|
|
tbl = &(lq_sta->lq_info[active_tbl]);
|
|
|
|
/* Revert to "active" rate and throughput info */
|
|
index = iwl4965_rate_index_from_plcp(
|
|
tbl->current_rate.rate_n_flags);
|
|
current_tpt = lq_sta->last_tpt;
|
|
|
|
/* Need to set up a new rate table in uCode */
|
|
update_lq = 1;
|
|
IWL_DEBUG_HT("XXY GO BACK TO OLD TABLE\n");
|
|
}
|
|
|
|
/* Either way, we've made a decision; modulation mode
|
|
* search is done, allow rate adjustment next time. */
|
|
lq_sta->search_better_tbl = 0;
|
|
done_search = 1; /* Don't switch modes below! */
|
|
goto lq_update;
|
|
}
|
|
|
|
/* (Else) not in search of better modulation mode, try for better
|
|
* starting rate, while staying in this mode. */
|
|
high_low = rs_get_adjacent_rate(index, rate_scale_index_msk,
|
|
tbl->lq_type);
|
|
low = high_low & 0xff;
|
|
high = (high_low >> 8) & 0xff;
|
|
|
|
/* Collect measured throughputs for current and adjacent rates */
|
|
current_tpt = window->average_tpt;
|
|
if (low != IWL_RATE_INVALID)
|
|
low_tpt = tbl->win[low].average_tpt;
|
|
if (high != IWL_RATE_INVALID)
|
|
high_tpt = tbl->win[high].average_tpt;
|
|
|
|
/* Assume rate increase */
|
|
scale_action = 1;
|
|
|
|
/* Too many failures, decrease rate */
|
|
if ((window->success_ratio <= IWL_RATE_DECREASE_TH) ||
|
|
(current_tpt == 0)) {
|
|
IWL_DEBUG_RATE("decrease rate because of low success_ratio\n");
|
|
scale_action = -1;
|
|
|
|
/* No throughput measured yet for adjacent rates; try increase. */
|
|
} else if ((low_tpt == IWL_INVALID_VALUE) &&
|
|
(high_tpt == IWL_INVALID_VALUE))
|
|
scale_action = 1;
|
|
|
|
/* Both adjacent throughputs are measured, but neither one has better
|
|
* throughput; we're using the best rate, don't change it! */
|
|
else if ((low_tpt != IWL_INVALID_VALUE) &&
|
|
(high_tpt != IWL_INVALID_VALUE) &&
|
|
(low_tpt < current_tpt) &&
|
|
(high_tpt < current_tpt))
|
|
scale_action = 0;
|
|
|
|
/* At least one adjacent rate's throughput is measured,
|
|
* and may have better performance. */
|
|
else {
|
|
/* Higher adjacent rate's throughput is measured */
|
|
if (high_tpt != IWL_INVALID_VALUE) {
|
|
/* Higher rate has better throughput */
|
|
if (high_tpt > current_tpt)
|
|
scale_action = 1;
|
|
else {
|
|
IWL_DEBUG_RATE
|
|
("decrease rate because of high tpt\n");
|
|
scale_action = -1;
|
|
}
|
|
|
|
/* Lower adjacent rate's throughput is measured */
|
|
} else if (low_tpt != IWL_INVALID_VALUE) {
|
|
/* Lower rate has better throughput */
|
|
if (low_tpt > current_tpt) {
|
|
IWL_DEBUG_RATE
|
|
("decrease rate because of low tpt\n");
|
|
scale_action = -1;
|
|
} else
|
|
scale_action = 1;
|
|
}
|
|
}
|
|
|
|
/* Sanity check; asked for decrease, but success rate or throughput
|
|
* has been good at old rate. Don't change it. */
|
|
if (scale_action == -1) {
|
|
if ((low != IWL_RATE_INVALID) &&
|
|
((window->success_ratio > IWL_RATE_HIGH_TH) ||
|
|
(current_tpt > (100 * tbl->expected_tpt[low]))))
|
|
scale_action = 0;
|
|
|
|
/* Sanity check; asked for increase, but success rate has not been great
|
|
* even at old rate, higher rate will be worse. Don't change it. */
|
|
} else if ((scale_action == 1) &&
|
|
(window->success_ratio < IWL_RATE_INCREASE_TH))
|
|
scale_action = 0;
|
|
|
|
switch (scale_action) {
|
|
case -1:
|
|
/* Decrease starting rate, update uCode's rate table */
|
|
if (low != IWL_RATE_INVALID) {
|
|
update_lq = 1;
|
|
index = low;
|
|
}
|
|
break;
|
|
case 1:
|
|
/* Increase starting rate, update uCode's rate table */
|
|
if (high != IWL_RATE_INVALID) {
|
|
update_lq = 1;
|
|
index = high;
|
|
}
|
|
|
|
break;
|
|
case 0:
|
|
/* No change */
|
|
default:
|
|
break;
|
|
}
|
|
|
|
IWL_DEBUG_HT("choose rate scale index %d action %d low %d "
|
|
"high %d type %d\n",
|
|
index, scale_action, low, high, tbl->lq_type);
|
|
|
|
lq_update:
|
|
/* Replace uCode's rate table for the destination station. */
|
|
if (update_lq) {
|
|
rs_mcs_from_tbl(&mcs_rate, tbl, index, is_green);
|
|
rs_fill_link_cmd(lq_sta, &mcs_rate, &lq_sta->lq);
|
|
rs_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC);
|
|
}
|
|
|
|
/* Should we stay with this modulation mode, or search for a new one? */
|
|
rs_stay_in_table(lq_sta);
|
|
|
|
/*
|
|
* Search for new modulation mode if we're:
|
|
* 1) Not changing rates right now
|
|
* 2) Not just finishing up a search
|
|
* 3) Allowing a new search
|
|
*/
|
|
if (!update_lq && !done_search && !lq_sta->stay_in_tbl) {
|
|
/* Save current throughput to compare with "search" throughput*/
|
|
lq_sta->last_tpt = current_tpt;
|
|
|
|
/* Select a new "search" modulation mode to try.
|
|
* If one is found, set up the new "search" table. */
|
|
if (is_legacy(tbl->lq_type))
|
|
rs_move_legacy_other(priv, lq_sta, conf, sta, index);
|
|
else if (is_siso(tbl->lq_type))
|
|
rs_move_siso_to_other(priv, lq_sta, conf, sta, index);
|
|
else
|
|
rs_move_mimo_to_other(priv, lq_sta, conf, sta, index);
|
|
|
|
/* If new "search" mode was selected, set up in uCode table */
|
|
if (lq_sta->search_better_tbl) {
|
|
/* Access the "search" table, clear its history. */
|
|
tbl = &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
|
|
for (i = 0; i < IWL_RATE_COUNT; i++)
|
|
rs_rate_scale_clear_window(&(tbl->win[i]));
|
|
|
|
/* Use new "search" start rate */
|
|
index = iwl4965_rate_index_from_plcp(
|
|
tbl->current_rate.rate_n_flags);
|
|
|
|
IWL_DEBUG_HT("Switch current mcs: %X index: %d\n",
|
|
tbl->current_rate.rate_n_flags, index);
|
|
rs_fill_link_cmd(lq_sta, &tbl->current_rate,
|
|
&lq_sta->lq);
|
|
rs_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC);
|
|
}
|
|
|
|
/* If the "active" (non-search) mode was legacy,
|
|
* and we've tried switching antennas,
|
|
* but we haven't been able to try HT modes (not available),
|
|
* stay with best antenna legacy modulation for a while
|
|
* before next round of mode comparisons. */
|
|
tbl1 = &(lq_sta->lq_info[lq_sta->active_tbl]);
|
|
if (is_legacy(tbl1->lq_type) &&
|
|
#ifdef CONFIG_IWL4965_HT
|
|
(!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE)) &&
|
|
#endif
|
|
(lq_sta->action_counter >= 1)) {
|
|
lq_sta->action_counter = 0;
|
|
IWL_DEBUG_HT("LQ: STAY in legacy table\n");
|
|
rs_set_stay_in_table(1, lq_sta);
|
|
}
|
|
|
|
/* If we're in an HT mode, and all 3 mode switch actions
|
|
* have been tried and compared, stay in this best modulation
|
|
* mode for a while before next round of mode comparisons. */
|
|
if (lq_sta->enable_counter &&
|
|
(lq_sta->action_counter >= IWL_ACTION_LIMIT)) {
|
|
#ifdef CONFIG_IWL4965_HT
|
|
if ((lq_sta->last_tpt > IWL_AGG_TPT_THREHOLD) &&
|
|
(lq_sta->tx_agg_tid_en & (1 << tid)) &&
|
|
(tid != MAX_TID_COUNT)) {
|
|
IWL_DEBUG_HT("try to aggregate tid %d\n", tid);
|
|
rs_tl_turn_on_agg(priv, tid, lq_sta, sta);
|
|
}
|
|
#endif /*CONFIG_IWL4965_HT */
|
|
lq_sta->action_counter = 0;
|
|
rs_set_stay_in_table(0, lq_sta);
|
|
}
|
|
|
|
/*
|
|
* Else, don't search for a new modulation mode.
|
|
* Put new timestamp in stay-in-modulation-mode flush timer if:
|
|
* 1) Not changing rates right now
|
|
* 2) Not just finishing up a search
|
|
* 3) flush timer is empty
|
|
*/
|
|
} else {
|
|
if ((!update_lq) && (!done_search) && (!lq_sta->flush_timer))
|
|
lq_sta->flush_timer = jiffies;
|
|
}
|
|
|
|
out:
|
|
rs_mcs_from_tbl(&tbl->current_rate, tbl, index, is_green);
|
|
i = index;
|
|
sta->last_txrate_idx = i;
|
|
|
|
/* sta->txrate_idx is an index to A mode rates which start
|
|
* at IWL_FIRST_OFDM_RATE
|
|
*/
|
|
if (lq_sta->band == IEEE80211_BAND_5GHZ)
|
|
sta->txrate_idx = i - IWL_FIRST_OFDM_RATE;
|
|
else
|
|
sta->txrate_idx = i;
|
|
|
|
return;
|
|
}
|
|
|
|
|
|
static void rs_initialize_lq(struct iwl4965_priv *priv,
|
|
struct ieee80211_conf *conf,
|
|
struct sta_info *sta)
|
|
{
|
|
int i;
|
|
struct iwl4965_lq_sta *lq_sta;
|
|
struct iwl4965_scale_tbl_info *tbl;
|
|
u8 active_tbl = 0;
|
|
int rate_idx;
|
|
u8 use_green = rs_use_green(priv, conf);
|
|
struct iwl4965_rate mcs_rate;
|
|
|
|
if (!sta || !sta->rate_ctrl_priv)
|
|
goto out;
|
|
|
|
lq_sta = (struct iwl4965_lq_sta *)sta->rate_ctrl_priv;
|
|
i = sta->last_txrate_idx;
|
|
|
|
if ((lq_sta->lq.sta_id == 0xff) &&
|
|
(priv->iw_mode == IEEE80211_IF_TYPE_IBSS))
|
|
goto out;
|
|
|
|
if (!lq_sta->search_better_tbl)
|
|
active_tbl = lq_sta->active_tbl;
|
|
else
|
|
active_tbl = 1 - lq_sta->active_tbl;
|
|
|
|
tbl = &(lq_sta->lq_info[active_tbl]);
|
|
|
|
if ((i < 0) || (i >= IWL_RATE_COUNT))
|
|
i = 0;
|
|
|
|
mcs_rate.rate_n_flags = iwl4965_rates[i].plcp ;
|
|
mcs_rate.rate_n_flags |= RATE_MCS_ANT_B_MSK;
|
|
mcs_rate.rate_n_flags &= ~RATE_MCS_ANT_A_MSK;
|
|
|
|
if (i >= IWL_FIRST_CCK_RATE && i <= IWL_LAST_CCK_RATE)
|
|
mcs_rate.rate_n_flags |= RATE_MCS_CCK_MSK;
|
|
|
|
tbl->antenna_type = ANT_AUX;
|
|
rs_get_tbl_info_from_mcs(&mcs_rate, priv->band, tbl, &rate_idx);
|
|
if (!rs_is_ant_connected(priv->valid_antenna, tbl->antenna_type))
|
|
rs_toggle_antenna(&mcs_rate, tbl);
|
|
|
|
rs_mcs_from_tbl(&mcs_rate, tbl, rate_idx, use_green);
|
|
tbl->current_rate.rate_n_flags = mcs_rate.rate_n_flags;
|
|
rs_get_expected_tpt_table(lq_sta, tbl);
|
|
rs_fill_link_cmd(lq_sta, &mcs_rate, &lq_sta->lq);
|
|
rs_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC);
|
|
out:
|
|
return;
|
|
}
|
|
|
|
static void rs_get_rate(void *priv_rate, struct net_device *dev,
|
|
struct ieee80211_supported_band *sband,
|
|
struct sk_buff *skb,
|
|
struct rate_selection *sel)
|
|
{
|
|
|
|
int i;
|
|
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
|
|
struct ieee80211_conf *conf = &local->hw.conf;
|
|
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
|
|
struct sta_info *sta;
|
|
u16 fc;
|
|
struct iwl4965_priv *priv = (struct iwl4965_priv *)priv_rate;
|
|
struct iwl4965_lq_sta *lq_sta;
|
|
|
|
IWL_DEBUG_RATE_LIMIT("rate scale calculate new rate for skb\n");
|
|
|
|
sta = sta_info_get(local, hdr->addr1);
|
|
|
|
/* Send management frames and broadcast/multicast data using lowest
|
|
* rate. */
|
|
fc = le16_to_cpu(hdr->frame_control);
|
|
if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1) ||
|
|
!sta || !sta->rate_ctrl_priv) {
|
|
sel->rate = rate_lowest(local, sband, sta);
|
|
if (sta)
|
|
sta_info_put(sta);
|
|
return;
|
|
}
|
|
|
|
lq_sta = (struct iwl4965_lq_sta *)sta->rate_ctrl_priv;
|
|
i = sta->last_txrate_idx;
|
|
|
|
if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) &&
|
|
!lq_sta->ibss_sta_added) {
|
|
u8 sta_id = iwl4965_hw_find_station(priv, hdr->addr1);
|
|
DECLARE_MAC_BUF(mac);
|
|
|
|
if (sta_id == IWL_INVALID_STATION) {
|
|
IWL_DEBUG_RATE("LQ: ADD station %s\n",
|
|
print_mac(mac, hdr->addr1));
|
|
sta_id = iwl4965_add_station_flags(priv, hdr->addr1,
|
|
0, CMD_ASYNC, NULL);
|
|
}
|
|
if ((sta_id != IWL_INVALID_STATION)) {
|
|
lq_sta->lq.sta_id = sta_id;
|
|
lq_sta->lq.rs_table[0].rate_n_flags = 0;
|
|
lq_sta->ibss_sta_added = 1;
|
|
rs_initialize_lq(priv, conf, sta);
|
|
}
|
|
if (!lq_sta->ibss_sta_added)
|
|
goto done;
|
|
}
|
|
|
|
done:
|
|
if ((i < 0) || (i > IWL_RATE_COUNT)) {
|
|
sel->rate = rate_lowest(local, sband, sta);
|
|
return;
|
|
}
|
|
sta_info_put(sta);
|
|
|
|
sel->rate = &priv->ieee_rates[i];
|
|
}
|
|
|
|
static void *rs_alloc_sta(void *priv, gfp_t gfp)
|
|
{
|
|
struct iwl4965_lq_sta *lq_sta;
|
|
int i, j;
|
|
|
|
IWL_DEBUG_RATE("create station rate scale window\n");
|
|
|
|
lq_sta = kzalloc(sizeof(struct iwl4965_lq_sta), gfp);
|
|
|
|
if (lq_sta == NULL)
|
|
return NULL;
|
|
lq_sta->lq.sta_id = 0xff;
|
|
|
|
|
|
for (j = 0; j < LQ_SIZE; j++)
|
|
for (i = 0; i < IWL_RATE_COUNT; i++)
|
|
rs_rate_scale_clear_window(&(lq_sta->lq_info[j].win[i]));
|
|
|
|
return lq_sta;
|
|
}
|
|
|
|
static void rs_rate_init(void *priv_rate, void *priv_sta,
|
|
struct ieee80211_local *local,
|
|
struct sta_info *sta)
|
|
{
|
|
int i, j;
|
|
struct ieee80211_conf *conf = &local->hw.conf;
|
|
struct ieee80211_supported_band *sband;
|
|
struct iwl4965_priv *priv = (struct iwl4965_priv *)priv_rate;
|
|
struct iwl4965_lq_sta *lq_sta = priv_sta;
|
|
|
|
sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
|
|
|
|
lq_sta->flush_timer = 0;
|
|
lq_sta->supp_rates = sta->supp_rates[sband->band];
|
|
sta->txrate_idx = 3;
|
|
for (j = 0; j < LQ_SIZE; j++)
|
|
for (i = 0; i < IWL_RATE_COUNT; i++)
|
|
rs_rate_scale_clear_window(&(lq_sta->lq_info[j].win[i]));
|
|
|
|
IWL_DEBUG_RATE("rate scale global init\n");
|
|
/* TODO: what is a good starting rate for STA? About middle? Maybe not
|
|
* the lowest or the highest rate.. Could consider using RSSI from
|
|
* previous packets? Need to have IEEE 802.1X auth succeed immediately
|
|
* after assoc.. */
|
|
|
|
lq_sta->ibss_sta_added = 0;
|
|
if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {
|
|
u8 sta_id = iwl4965_hw_find_station(priv, sta->addr);
|
|
DECLARE_MAC_BUF(mac);
|
|
|
|
/* for IBSS the call are from tasklet */
|
|
IWL_DEBUG_HT("LQ: ADD station %s\n",
|
|
print_mac(mac, sta->addr));
|
|
|
|
if (sta_id == IWL_INVALID_STATION) {
|
|
IWL_DEBUG_RATE("LQ: ADD station %s\n",
|
|
print_mac(mac, sta->addr));
|
|
sta_id = iwl4965_add_station_flags(priv, sta->addr,
|
|
0, CMD_ASYNC, NULL);
|
|
}
|
|
if ((sta_id != IWL_INVALID_STATION)) {
|
|
lq_sta->lq.sta_id = sta_id;
|
|
lq_sta->lq.rs_table[0].rate_n_flags = 0;
|
|
}
|
|
/* FIXME: this is w/a remove it later */
|
|
priv->assoc_station_added = 1;
|
|
}
|
|
|
|
/* Find highest tx rate supported by hardware and destination station */
|
|
for (i = 0; i < sband->n_bitrates; i++)
|
|
if (sta->supp_rates[sband->band] & BIT(i))
|
|
sta->txrate_idx = i;
|
|
|
|
sta->last_txrate_idx = sta->txrate_idx;
|
|
/* WTF is with this bogus comment? A doesn't have cck rates */
|
|
/* For MODE_IEEE80211A, cck rates are at end of rate table */
|
|
if (local->hw.conf.channel->band == IEEE80211_BAND_5GHZ)
|
|
sta->last_txrate_idx += IWL_FIRST_OFDM_RATE;
|
|
|
|
lq_sta->is_dup = 0;
|
|
lq_sta->valid_antenna = priv->valid_antenna;
|
|
lq_sta->antenna = priv->antenna;
|
|
lq_sta->is_green = rs_use_green(priv, conf);
|
|
lq_sta->active_rate = priv->active_rate;
|
|
lq_sta->active_rate &= ~(0x1000);
|
|
lq_sta->active_rate_basic = priv->active_rate_basic;
|
|
lq_sta->band = priv->band;
|
|
#ifdef CONFIG_IWL4965_HT
|
|
/*
|
|
* active_siso_rate mask includes 9 MBits (bit 5), and CCK (bits 0-3),
|
|
* supp_rates[] does not; shift to convert format, force 9 MBits off.
|
|
*/
|
|
lq_sta->active_siso_rate = (priv->current_ht_config.supp_mcs_set[0] << 1);
|
|
lq_sta->active_siso_rate |=
|
|
(priv->current_ht_config.supp_mcs_set[0] & 0x1);
|
|
lq_sta->active_siso_rate &= ~((u16)0x2);
|
|
lq_sta->active_siso_rate =
|
|
lq_sta->active_siso_rate << IWL_FIRST_OFDM_RATE;
|
|
|
|
/* Same here */
|
|
lq_sta->active_mimo_rate = (priv->current_ht_config.supp_mcs_set[1] << 1);
|
|
lq_sta->active_mimo_rate |=
|
|
(priv->current_ht_config.supp_mcs_set[1] & 0x1);
|
|
lq_sta->active_mimo_rate &= ~((u16)0x2);
|
|
lq_sta->active_mimo_rate =
|
|
lq_sta->active_mimo_rate << IWL_FIRST_OFDM_RATE;
|
|
IWL_DEBUG_HT("SISO RATE 0x%X MIMO RATE 0x%X\n",
|
|
lq_sta->active_siso_rate,
|
|
lq_sta->active_mimo_rate);
|
|
/* as default allow aggregation for all tids */
|
|
lq_sta->tx_agg_tid_en = IWL_AGG_ALL_TID;
|
|
#endif /*CONFIG_IWL4965_HT*/
|
|
#ifdef CONFIG_MAC80211_DEBUGFS
|
|
lq_sta->drv = priv;
|
|
#endif
|
|
|
|
if (priv->assoc_station_added)
|
|
priv->lq_mngr.lq_ready = 1;
|
|
|
|
rs_initialize_lq(priv, conf, sta);
|
|
}
|
|
|
|
static void rs_fill_link_cmd(struct iwl4965_lq_sta *lq_sta,
|
|
struct iwl4965_rate *tx_mcs,
|
|
struct iwl4965_link_quality_cmd *lq_cmd)
|
|
{
|
|
int index = 0;
|
|
int rate_idx;
|
|
int repeat_rate = 0;
|
|
u8 ant_toggle_count = 0;
|
|
u8 use_ht_possible = 1;
|
|
struct iwl4965_rate new_rate;
|
|
struct iwl4965_scale_tbl_info tbl_type = { 0 };
|
|
|
|
/* Override starting rate (index 0) if needed for debug purposes */
|
|
rs_dbgfs_set_mcs(lq_sta, tx_mcs, index);
|
|
|
|
/* Interpret rate_n_flags */
|
|
rs_get_tbl_info_from_mcs(tx_mcs, lq_sta->band,
|
|
&tbl_type, &rate_idx);
|
|
|
|
/* How many times should we repeat the initial rate? */
|
|
if (is_legacy(tbl_type.lq_type)) {
|
|
ant_toggle_count = 1;
|
|
repeat_rate = IWL_NUMBER_TRY;
|
|
} else
|
|
repeat_rate = IWL_HT_NUMBER_TRY;
|
|
|
|
lq_cmd->general_params.mimo_delimiter =
|
|
is_mimo(tbl_type.lq_type) ? 1 : 0;
|
|
|
|
/* Fill 1st table entry (index 0) */
|
|
lq_cmd->rs_table[index].rate_n_flags =
|
|
cpu_to_le32(tx_mcs->rate_n_flags);
|
|
new_rate.rate_n_flags = tx_mcs->rate_n_flags;
|
|
|
|
if (is_mimo(tbl_type.lq_type) || (tbl_type.antenna_type == ANT_MAIN))
|
|
lq_cmd->general_params.single_stream_ant_msk
|
|
= LINK_QUAL_ANT_A_MSK;
|
|
else
|
|
lq_cmd->general_params.single_stream_ant_msk
|
|
= LINK_QUAL_ANT_B_MSK;
|
|
|
|
index++;
|
|
repeat_rate--;
|
|
|
|
/* Fill rest of rate table */
|
|
while (index < LINK_QUAL_MAX_RETRY_NUM) {
|
|
/* Repeat initial/next rate.
|
|
* For legacy IWL_NUMBER_TRY == 1, this loop will not execute.
|
|
* For HT IWL_HT_NUMBER_TRY == 3, this executes twice. */
|
|
while (repeat_rate > 0 && (index < LINK_QUAL_MAX_RETRY_NUM)) {
|
|
if (is_legacy(tbl_type.lq_type)) {
|
|
if (ant_toggle_count <
|
|
NUM_TRY_BEFORE_ANTENNA_TOGGLE)
|
|
ant_toggle_count++;
|
|
else {
|
|
rs_toggle_antenna(&new_rate, &tbl_type);
|
|
ant_toggle_count = 1;
|
|
}
|
|
}
|
|
|
|
/* Override next rate if needed for debug purposes */
|
|
rs_dbgfs_set_mcs(lq_sta, &new_rate, index);
|
|
|
|
/* Fill next table entry */
|
|
lq_cmd->rs_table[index].rate_n_flags =
|
|
cpu_to_le32(new_rate.rate_n_flags);
|
|
repeat_rate--;
|
|
index++;
|
|
}
|
|
|
|
rs_get_tbl_info_from_mcs(&new_rate, lq_sta->band, &tbl_type,
|
|
&rate_idx);
|
|
|
|
/* Indicate to uCode which entries might be MIMO.
|
|
* If initial rate was MIMO, this will finally end up
|
|
* as (IWL_HT_NUMBER_TRY * 2), after 2nd pass, otherwise 0. */
|
|
if (is_mimo(tbl_type.lq_type))
|
|
lq_cmd->general_params.mimo_delimiter = index;
|
|
|
|
/* Get next rate */
|
|
rs_get_lower_rate(lq_sta, &tbl_type, rate_idx,
|
|
use_ht_possible, &new_rate);
|
|
|
|
/* How many times should we repeat the next rate? */
|
|
if (is_legacy(tbl_type.lq_type)) {
|
|
if (ant_toggle_count < NUM_TRY_BEFORE_ANTENNA_TOGGLE)
|
|
ant_toggle_count++;
|
|
else {
|
|
rs_toggle_antenna(&new_rate, &tbl_type);
|
|
ant_toggle_count = 1;
|
|
}
|
|
repeat_rate = IWL_NUMBER_TRY;
|
|
} else
|
|
repeat_rate = IWL_HT_NUMBER_TRY;
|
|
|
|
/* Don't allow HT rates after next pass.
|
|
* rs_get_lower_rate() will change type to LQ_A or LQ_G. */
|
|
use_ht_possible = 0;
|
|
|
|
/* Override next rate if needed for debug purposes */
|
|
rs_dbgfs_set_mcs(lq_sta, &new_rate, index);
|
|
|
|
/* Fill next table entry */
|
|
lq_cmd->rs_table[index].rate_n_flags =
|
|
cpu_to_le32(new_rate.rate_n_flags);
|
|
|
|
index++;
|
|
repeat_rate--;
|
|
}
|
|
|
|
lq_cmd->general_params.dual_stream_ant_msk = 3;
|
|
lq_cmd->agg_params.agg_dis_start_th = 3;
|
|
lq_cmd->agg_params.agg_time_limit = cpu_to_le16(4000);
|
|
}
|
|
|
|
static void *rs_alloc(struct ieee80211_local *local)
|
|
{
|
|
return local->hw.priv;
|
|
}
|
|
/* rate scale requires free function to be implemented */
|
|
static void rs_free(void *priv_rate)
|
|
{
|
|
return;
|
|
}
|
|
|
|
static void rs_clear(void *priv_rate)
|
|
{
|
|
struct iwl4965_priv *priv = (struct iwl4965_priv *) priv_rate;
|
|
|
|
IWL_DEBUG_RATE("enter\n");
|
|
|
|
priv->lq_mngr.lq_ready = 0;
|
|
|
|
IWL_DEBUG_RATE("leave\n");
|
|
}
|
|
|
|
static void rs_free_sta(void *priv, void *priv_sta)
|
|
{
|
|
struct iwl4965_lq_sta *lq_sta = priv_sta;
|
|
|
|
IWL_DEBUG_RATE("enter\n");
|
|
kfree(lq_sta);
|
|
IWL_DEBUG_RATE("leave\n");
|
|
}
|
|
|
|
|
|
#ifdef CONFIG_MAC80211_DEBUGFS
|
|
static int open_file_generic(struct inode *inode, struct file *file)
|
|
{
|
|
file->private_data = inode->i_private;
|
|
return 0;
|
|
}
|
|
static void rs_dbgfs_set_mcs(struct iwl4965_lq_sta *lq_sta,
|
|
struct iwl4965_rate *mcs, int index)
|
|
{
|
|
u32 base_rate;
|
|
|
|
if (lq_sta->band == IEEE80211_BAND_5GHZ)
|
|
base_rate = 0x800D;
|
|
else
|
|
base_rate = 0x820A;
|
|
|
|
if (lq_sta->dbg_fixed.rate_n_flags) {
|
|
if (index < 12)
|
|
mcs->rate_n_flags = lq_sta->dbg_fixed.rate_n_flags;
|
|
else
|
|
mcs->rate_n_flags = base_rate;
|
|
IWL_DEBUG_RATE("Fixed rate ON\n");
|
|
return;
|
|
}
|
|
|
|
IWL_DEBUG_RATE("Fixed rate OFF\n");
|
|
}
|
|
|
|
static ssize_t rs_sta_dbgfs_scale_table_write(struct file *file,
|
|
const char __user *user_buf, size_t count, loff_t *ppos)
|
|
{
|
|
struct iwl4965_lq_sta *lq_sta = file->private_data;
|
|
char buf[64];
|
|
int buf_size;
|
|
u32 parsed_rate;
|
|
|
|
memset(buf, 0, sizeof(buf));
|
|
buf_size = min(count, sizeof(buf) - 1);
|
|
if (copy_from_user(buf, user_buf, buf_size))
|
|
return -EFAULT;
|
|
|
|
if (sscanf(buf, "%x", &parsed_rate) == 1)
|
|
lq_sta->dbg_fixed.rate_n_flags = parsed_rate;
|
|
else
|
|
lq_sta->dbg_fixed.rate_n_flags = 0;
|
|
|
|
lq_sta->active_rate = 0x0FFF; /* 1 - 54 MBits, includes CCK */
|
|
lq_sta->active_siso_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */
|
|
lq_sta->active_mimo_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */
|
|
|
|
IWL_DEBUG_RATE("sta_id %d rate 0x%X\n",
|
|
lq_sta->lq.sta_id, lq_sta->dbg_fixed.rate_n_flags);
|
|
|
|
if (lq_sta->dbg_fixed.rate_n_flags) {
|
|
rs_fill_link_cmd(lq_sta, &lq_sta->dbg_fixed, &lq_sta->lq);
|
|
rs_send_lq_cmd(lq_sta->drv, &lq_sta->lq, CMD_ASYNC);
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t rs_sta_dbgfs_scale_table_read(struct file *file,
|
|
char __user *user_buf, size_t count, loff_t *ppos)
|
|
{
|
|
char buff[1024];
|
|
int desc = 0;
|
|
int i = 0;
|
|
|
|
struct iwl4965_lq_sta *lq_sta = file->private_data;
|
|
|
|
desc += sprintf(buff+desc, "sta_id %d\n", lq_sta->lq.sta_id);
|
|
desc += sprintf(buff+desc, "failed=%d success=%d rate=0%X\n",
|
|
lq_sta->total_failed, lq_sta->total_success,
|
|
lq_sta->active_rate);
|
|
desc += sprintf(buff+desc, "fixed rate 0x%X\n",
|
|
lq_sta->dbg_fixed.rate_n_flags);
|
|
desc += sprintf(buff+desc, "general:"
|
|
"flags=0x%X mimo-d=%d s-ant0x%x d-ant=0x%x\n",
|
|
lq_sta->lq.general_params.flags,
|
|
lq_sta->lq.general_params.mimo_delimiter,
|
|
lq_sta->lq.general_params.single_stream_ant_msk,
|
|
lq_sta->lq.general_params.dual_stream_ant_msk);
|
|
|
|
desc += sprintf(buff+desc, "agg:"
|
|
"time_limit=%d dist_start_th=%d frame_cnt_limit=%d\n",
|
|
le16_to_cpu(lq_sta->lq.agg_params.agg_time_limit),
|
|
lq_sta->lq.agg_params.agg_dis_start_th,
|
|
lq_sta->lq.agg_params.agg_frame_cnt_limit);
|
|
|
|
desc += sprintf(buff+desc,
|
|
"Start idx [0]=0x%x [1]=0x%x [2]=0x%x [3]=0x%x\n",
|
|
lq_sta->lq.general_params.start_rate_index[0],
|
|
lq_sta->lq.general_params.start_rate_index[1],
|
|
lq_sta->lq.general_params.start_rate_index[2],
|
|
lq_sta->lq.general_params.start_rate_index[3]);
|
|
|
|
|
|
for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++)
|
|
desc += sprintf(buff+desc, " rate[%d] 0x%X\n",
|
|
i, le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags));
|
|
|
|
return simple_read_from_buffer(user_buf, count, ppos, buff, desc);
|
|
}
|
|
|
|
static const struct file_operations rs_sta_dbgfs_scale_table_ops = {
|
|
.write = rs_sta_dbgfs_scale_table_write,
|
|
.read = rs_sta_dbgfs_scale_table_read,
|
|
.open = open_file_generic,
|
|
};
|
|
static ssize_t rs_sta_dbgfs_stats_table_read(struct file *file,
|
|
char __user *user_buf, size_t count, loff_t *ppos)
|
|
{
|
|
char buff[1024];
|
|
int desc = 0;
|
|
int i, j;
|
|
|
|
struct iwl4965_lq_sta *lq_sta = file->private_data;
|
|
for (i = 0; i < LQ_SIZE; i++) {
|
|
desc += sprintf(buff+desc, "%s type=%d SGI=%d FAT=%d DUP=%d\n"
|
|
"rate=0x%X\n",
|
|
lq_sta->active_tbl == i?"*":"x",
|
|
lq_sta->lq_info[i].lq_type,
|
|
lq_sta->lq_info[i].is_SGI,
|
|
lq_sta->lq_info[i].is_fat,
|
|
lq_sta->lq_info[i].is_dup,
|
|
lq_sta->lq_info[i].current_rate.rate_n_flags);
|
|
for (j = 0; j < IWL_RATE_COUNT; j++) {
|
|
desc += sprintf(buff+desc,
|
|
"counter=%d success=%d %%=%d\n",
|
|
lq_sta->lq_info[i].win[j].counter,
|
|
lq_sta->lq_info[i].win[j].success_counter,
|
|
lq_sta->lq_info[i].win[j].success_ratio);
|
|
}
|
|
}
|
|
return simple_read_from_buffer(user_buf, count, ppos, buff, desc);
|
|
}
|
|
|
|
static const struct file_operations rs_sta_dbgfs_stats_table_ops = {
|
|
.read = rs_sta_dbgfs_stats_table_read,
|
|
.open = open_file_generic,
|
|
};
|
|
|
|
static void rs_add_debugfs(void *priv, void *priv_sta,
|
|
struct dentry *dir)
|
|
{
|
|
struct iwl4965_lq_sta *lq_sta = priv_sta;
|
|
lq_sta->rs_sta_dbgfs_scale_table_file =
|
|
debugfs_create_file("rate_scale_table", 0600, dir,
|
|
lq_sta, &rs_sta_dbgfs_scale_table_ops);
|
|
lq_sta->rs_sta_dbgfs_stats_table_file =
|
|
debugfs_create_file("rate_stats_table", 0600, dir,
|
|
lq_sta, &rs_sta_dbgfs_stats_table_ops);
|
|
#ifdef CONFIG_IWL4965_HT
|
|
lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file =
|
|
debugfs_create_u8("tx_agg_tid_enable", 0600, dir,
|
|
&lq_sta->tx_agg_tid_en);
|
|
#endif
|
|
|
|
}
|
|
|
|
static void rs_remove_debugfs(void *priv, void *priv_sta)
|
|
{
|
|
struct iwl4965_lq_sta *lq_sta = priv_sta;
|
|
debugfs_remove(lq_sta->rs_sta_dbgfs_scale_table_file);
|
|
debugfs_remove(lq_sta->rs_sta_dbgfs_stats_table_file);
|
|
#ifdef CONFIG_IWL4965_HT
|
|
debugfs_remove(lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file);
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
static struct rate_control_ops rs_ops = {
|
|
.module = NULL,
|
|
.name = RS_NAME,
|
|
.tx_status = rs_tx_status,
|
|
.get_rate = rs_get_rate,
|
|
.rate_init = rs_rate_init,
|
|
.clear = rs_clear,
|
|
.alloc = rs_alloc,
|
|
.free = rs_free,
|
|
.alloc_sta = rs_alloc_sta,
|
|
.free_sta = rs_free_sta,
|
|
#ifdef CONFIG_MAC80211_DEBUGFS
|
|
.add_sta_debugfs = rs_add_debugfs,
|
|
.remove_sta_debugfs = rs_remove_debugfs,
|
|
#endif
|
|
};
|
|
|
|
int iwl4965_fill_rs_info(struct ieee80211_hw *hw, char *buf, u8 sta_id)
|
|
{
|
|
struct ieee80211_local *local = hw_to_local(hw);
|
|
struct iwl4965_priv *priv = hw->priv;
|
|
struct iwl4965_lq_sta *lq_sta;
|
|
struct sta_info *sta;
|
|
int cnt = 0, i;
|
|
u32 samples = 0, success = 0, good = 0;
|
|
unsigned long now = jiffies;
|
|
u32 max_time = 0;
|
|
u8 lq_type, antenna;
|
|
|
|
sta = sta_info_get(local, priv->stations[sta_id].sta.sta.addr);
|
|
if (!sta || !sta->rate_ctrl_priv) {
|
|
if (sta) {
|
|
sta_info_put(sta);
|
|
IWL_DEBUG_RATE("leave - no private rate data!\n");
|
|
} else
|
|
IWL_DEBUG_RATE("leave - no station!\n");
|
|
return sprintf(buf, "station %d not found\n", sta_id);
|
|
}
|
|
|
|
lq_sta = (void *)sta->rate_ctrl_priv;
|
|
|
|
lq_type = lq_sta->lq_info[lq_sta->active_tbl].lq_type;
|
|
antenna = lq_sta->lq_info[lq_sta->active_tbl].antenna_type;
|
|
|
|
if (is_legacy(lq_type))
|
|
i = IWL_RATE_54M_INDEX;
|
|
else
|
|
i = IWL_RATE_60M_INDEX;
|
|
while (1) {
|
|
u64 mask;
|
|
int j;
|
|
int active = lq_sta->active_tbl;
|
|
|
|
cnt +=
|
|
sprintf(&buf[cnt], " %2dMbs: ", iwl4965_rates[i].ieee / 2);
|
|
|
|
mask = (1ULL << (IWL_RATE_MAX_WINDOW - 1));
|
|
for (j = 0; j < IWL_RATE_MAX_WINDOW; j++, mask >>= 1)
|
|
buf[cnt++] =
|
|
(lq_sta->lq_info[active].win[i].data & mask)
|
|
? '1' : '0';
|
|
|
|
samples += lq_sta->lq_info[active].win[i].counter;
|
|
good += lq_sta->lq_info[active].win[i].success_counter;
|
|
success += lq_sta->lq_info[active].win[i].success_counter *
|
|
iwl4965_rates[i].ieee;
|
|
|
|
if (lq_sta->lq_info[active].win[i].stamp) {
|
|
int delta =
|
|
jiffies_to_msecs(now -
|
|
lq_sta->lq_info[active].win[i].stamp);
|
|
|
|
if (delta > max_time)
|
|
max_time = delta;
|
|
|
|
cnt += sprintf(&buf[cnt], "%5dms\n", delta);
|
|
} else
|
|
buf[cnt++] = '\n';
|
|
|
|
j = iwl4965_get_prev_ieee_rate(i);
|
|
if (j == i)
|
|
break;
|
|
i = j;
|
|
}
|
|
|
|
/* Display the average rate of all samples taken.
|
|
*
|
|
* NOTE: We multiply # of samples by 2 since the IEEE measurement
|
|
* added from iwl4965_rates is actually 2X the rate */
|
|
if (samples)
|
|
cnt += sprintf(&buf[cnt],
|
|
"\nAverage rate is %3d.%02dMbs over last %4dms\n"
|
|
"%3d%% success (%d good packets over %d tries)\n",
|
|
success / (2 * samples), (success * 5 / samples) % 10,
|
|
max_time, good * 100 / samples, good, samples);
|
|
else
|
|
cnt += sprintf(&buf[cnt], "\nAverage rate: 0Mbs\n");
|
|
|
|
cnt += sprintf(&buf[cnt], "\nrate scale type %d antenna %d "
|
|
"active_search %d rate index %d\n", lq_type, antenna,
|
|
lq_sta->search_better_tbl, sta->last_txrate_idx);
|
|
|
|
sta_info_put(sta);
|
|
return cnt;
|
|
}
|
|
|
|
void iwl4965_rate_scale_init(struct ieee80211_hw *hw, s32 sta_id)
|
|
{
|
|
struct iwl4965_priv *priv = hw->priv;
|
|
|
|
priv->lq_mngr.lq_ready = 1;
|
|
}
|
|
|
|
void iwl4965_rate_control_register(struct ieee80211_hw *hw)
|
|
{
|
|
ieee80211_rate_control_register(&rs_ops);
|
|
}
|
|
|
|
void iwl4965_rate_control_unregister(struct ieee80211_hw *hw)
|
|
{
|
|
ieee80211_rate_control_unregister(&rs_ops);
|
|
}
|
|
|