mainlining shenanigans
Go to file
Niklas Söderlund 3e52419ec0 media: rcar-{csi2,vin}: Move to full Virtual Channel routing per CSI-2 IP
When Gen3 support was first added to this R-Car VIN and CSI-2 driver the
routing was centred around the CHSEL register which multiplexes the
different parallel buses that sit between the CSI-2 receivers source
side and the VIN dma engines. This was a bad design as the multiplexing
do allow for only a few combinations and do not play nice with many
video streams in the system.

For example it's only possible for CSI-2 Virtual Channels 0 and 1 of any
given CSI-2 receiver to be used together with the scaler.

Later datasheets have expanded the documentation and it is now possible
to improve on this design by allowing any Virtual Channel to be routed
to any R-Car VIN instance, provided that there exists a parallel bus
between them. This increases the flexibility as all Virtual Channels can
now be used together with the scaler for example.

The redesign is not however perfect. While the new design allows for
many more routes, two constrains limit a small portion of routes that
was possible in the old design but are no more.

- It is no longer possible to route the same CSI-2 and VC to more then
  one VIN at a time. This was theoretically possible before if the
  specific SoC allowed for the same CSI-2 and VC to be routed to two
  different VIN capture groups.

- It is no longer possible to simultaneously mix links from two CSI-2 IP
  blocks to the same VIN capture group.

  For example if VIN2 is capturing from CSI40 then VIN{0,1,3} must also
  capture from CSI40. While VIN{4,5,6,7} is still free to capture from
  any other CSI-2 IP in the system. Once all VIN{0,1,2,3} links to CSI40
  are disabled that VIN capture group is free again to capture from any
  other CSI-2 IP it is connected to.

At the core of the redesign is greater cooperator of the R-Car VIN and
CSI-2 drivers in configuring the routing. The VIN driver is after this
change only responsible to configure the full VIN capture groups
parallel buses to be to a particular CSI-2 IP. While the configuration
of which CSI-2 Virtual Channel is outputted on which of the R-Car CSI-2
IP output ports is handled by the CSI-2 driver.

Before this change the CSI-2 Virtual Channel to output port was static
in the CSI-2 driver and the different links only manipulated the VIN
capture groups CHSEL register. With this change both the CHSEl register
and the CSI-2 routing VCDT registers are modified for greater
flexibility.

This change touches both the R-Car VIN and R-Car CSI-2 drivers in the
same commit as both drivers cooperate closely and one change without the
other would more or less break video capture.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: fix two trivial checkpatch whitespace issues]
2022-02-22 09:41:11 +01:00
arch bitmap patches for 5.17-rc1 2022-01-23 06:20:44 +02:00
block bitmap patches for 5.17-rc1 2022-01-23 06:20:44 +02:00
certs certs: Fix build error when CONFIG_MODULE_SIG_KEY is empty 2022-01-23 00:08:44 +09:00
crypto lib/crypto: add prompts back to crypto libraries 2022-01-18 13:03:55 +01:00
Documentation media: dt-bindings: media: hynix,hi846: add link-frequencies description 2022-02-17 09:57:47 +01:00
drivers media: rcar-{csi2,vin}: Move to full Virtual Channel routing per CSI-2 IP 2022-02-22 09:41:11 +01:00
fs bitmap patches for 5.17-rc1 2022-01-23 06:20:44 +02:00
include media: Define MIPI CSI-2 data types in a shared header file 2022-02-17 10:29:44 +01:00
init lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() 2022-01-22 08:33:37 +02:00
ipc proc: remove PDE_DATA() completely 2022-01-22 08:33:37 +02:00
kernel ftrace: Fix s390 breakage from sorting mcount tables 2022-01-23 08:07:02 +02:00
lib bitmap patches for 5.17-rc1 2022-01-23 06:20:44 +02:00
LICENSES LICENSES/LGPL-2.1: Add LGPL-2.1-or-later as valid identifiers 2021-12-16 14:33:10 +01:00
mm bitmap patches for 5.17-rc1 2022-01-23 06:20:44 +02:00
net bitmap patches for 5.17-rc1 2022-01-23 06:20:44 +02:00
samples Merge branch 'akpm' (patches from Andrew) 2022-01-20 10:41:01 +02:00
scripts Devicetree fixes for v5.17, take 1: 2022-01-22 09:52:17 +02:00
security fs.idmapped.v5.17 2022-01-11 14:26:55 -08:00
sound proc: remove PDE_DATA() completely 2022-01-22 08:33:37 +02:00
tools perf tools changes for v5.17: 2nd batch 2022-01-23 08:14:21 +02:00
usr usr/include/Makefile: add linux/nfc.h to the compile-test coverage 2022-01-22 21:48:45 +09:00
virt Generic: 2022-01-22 09:40:01 +02:00
.clang-format genirq/msi: Make interrupt allocation less convoluted 2021-12-16 22:22:20 +01:00
.cocciconfig
.get_maintainer.ignore Opt out of scripts/get_maintainer.pl 2019-05-16 10:53:40 -07:00
.gitattributes .gitattributes: use 'dts' diff driver for dts files 2019-12-04 19:44:11 -08:00
.gitignore .gitignore: ignore only top-level modules.builtin 2021-05-02 00:43:35 +09:00
.mailmap RISCV: 2022-01-16 16:15:14 +02:00
COPYING COPYING: state that all contributions really are covered by this file 2020-02-10 13:32:20 -08:00
CREDITS MAINTAINERS: Removing Ohad from remoteproc/rpmsg maintenance 2021-12-08 10:09:40 -07:00
Kbuild kbuild: rename hostprogs-y/always to hostprogs/always-y 2020-02-04 01:53:07 +09:00
Kconfig kbuild: ensure full rebuild when the compiler is updated 2020-05-12 13:28:33 +09:00
MAINTAINERS media: MAINTAINERS: update drm/stm drm/sti and cec/sti maintainers 2022-01-28 19:32:49 +01:00
Makefile Linux 5.17-rc1 2022-01-23 10:12:53 +02:00
README Drop all 00-INDEX files from Documentation/ 2018-09-09 15:08:58 -06:00

Linux kernel
============

There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.

In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``.  The formatted documentation can also be read online at:

    https://www.kernel.org/doc/html/latest/

There are various text files in the Documentation/ subdirectory,
several of them using the Restructured Text markup notation.

Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.