forked from Minki/linux
4cdf2f4e24
When the platform detects an error on a PCI function or a service action has been performed it is put in the error state and an error event notification is provided to the OS. Currently we treat all error event notifications the same and simply set pdev->error_state = pci_channel_io_perm_failure requiring user intervention such as use of the recover attribute to get the device usable again. Despite requiring a manual step this also has the disadvantage that the device is completely torn down and recreated resulting in higher level devices such as a block or network device being recreated. In case of a block device this also means that it may need to be removed and added to a software raid even if that could otherwise survive with a temporary degradation. This is of course not ideal more so since an error notification with PEC 0x3A indicates that the platform already performed error recovery successfully or that the error state was caused by a service action that is now finished. At least in this case we can assume that the error state can be reset and the function made usable again. So as not to have the disadvantage of a full tear down and recreation we need to coordinate this recovery with the driver. Thankfully there is already a well defined recovery flow for this described in Documentation/PCI/pci-error-recovery.rst. The implementation of this is somewhat straight forward and simplified by the fact that our recovery flow is defined per PCI function. As a reset we use the newly introduced zpci_hot_reset_device() which also takes the PCI function out of the error state. Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Acked-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
388 lines
10 KiB
C
388 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright IBM Corp. 2012
|
|
*
|
|
* Author(s):
|
|
* Jan Glauber <jang@linux.vnet.ibm.com>
|
|
*/
|
|
|
|
#define KMSG_COMPONENT "zpci"
|
|
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/pci.h>
|
|
#include <asm/pci_debug.h>
|
|
#include <asm/pci_dma.h>
|
|
#include <asm/sclp.h>
|
|
|
|
#include "pci_bus.h"
|
|
|
|
/* Content Code Description for PCI Function Error */
|
|
struct zpci_ccdf_err {
|
|
u32 reserved1;
|
|
u32 fh; /* function handle */
|
|
u32 fid; /* function id */
|
|
u32 ett : 4; /* expected table type */
|
|
u32 mvn : 12; /* MSI vector number */
|
|
u32 dmaas : 8; /* DMA address space */
|
|
u32 : 6;
|
|
u32 q : 1; /* event qualifier */
|
|
u32 rw : 1; /* read/write */
|
|
u64 faddr; /* failing address */
|
|
u32 reserved3;
|
|
u16 reserved4;
|
|
u16 pec; /* PCI event code */
|
|
} __packed;
|
|
|
|
/* Content Code Description for PCI Function Availability */
|
|
struct zpci_ccdf_avail {
|
|
u32 reserved1;
|
|
u32 fh; /* function handle */
|
|
u32 fid; /* function id */
|
|
u32 reserved2;
|
|
u32 reserved3;
|
|
u32 reserved4;
|
|
u32 reserved5;
|
|
u16 reserved6;
|
|
u16 pec; /* PCI event code */
|
|
} __packed;
|
|
|
|
static inline bool ers_result_indicates_abort(pci_ers_result_t ers_res)
|
|
{
|
|
switch (ers_res) {
|
|
case PCI_ERS_RESULT_CAN_RECOVER:
|
|
case PCI_ERS_RESULT_RECOVERED:
|
|
case PCI_ERS_RESULT_NEED_RESET:
|
|
return false;
|
|
default:
|
|
return true;
|
|
}
|
|
}
|
|
|
|
static bool is_passed_through(struct zpci_dev *zdev)
|
|
{
|
|
return zdev->s390_domain;
|
|
}
|
|
|
|
static bool is_driver_supported(struct pci_driver *driver)
|
|
{
|
|
if (!driver || !driver->err_handler)
|
|
return false;
|
|
if (!driver->err_handler->error_detected)
|
|
return false;
|
|
if (!driver->err_handler->slot_reset)
|
|
return false;
|
|
if (!driver->err_handler->resume)
|
|
return false;
|
|
return true;
|
|
}
|
|
|
|
static pci_ers_result_t zpci_event_notify_error_detected(struct pci_dev *pdev,
|
|
struct pci_driver *driver)
|
|
{
|
|
pci_ers_result_t ers_res = PCI_ERS_RESULT_DISCONNECT;
|
|
|
|
ers_res = driver->err_handler->error_detected(pdev, pdev->error_state);
|
|
if (ers_result_indicates_abort(ers_res))
|
|
pr_info("%s: Automatic recovery failed after initial reporting\n", pci_name(pdev));
|
|
else if (ers_res == PCI_ERS_RESULT_NEED_RESET)
|
|
pr_debug("%s: Driver needs reset to recover\n", pci_name(pdev));
|
|
|
|
return ers_res;
|
|
}
|
|
|
|
static pci_ers_result_t zpci_event_do_error_state_clear(struct pci_dev *pdev,
|
|
struct pci_driver *driver)
|
|
{
|
|
pci_ers_result_t ers_res = PCI_ERS_RESULT_DISCONNECT;
|
|
struct zpci_dev *zdev = to_zpci(pdev);
|
|
int rc;
|
|
|
|
pr_info("%s: Unblocking device access for examination\n", pci_name(pdev));
|
|
rc = zpci_reset_load_store_blocked(zdev);
|
|
if (rc) {
|
|
pr_err("%s: Unblocking device access failed\n", pci_name(pdev));
|
|
/* Let's try a full reset instead */
|
|
return PCI_ERS_RESULT_NEED_RESET;
|
|
}
|
|
|
|
if (driver->err_handler->mmio_enabled) {
|
|
ers_res = driver->err_handler->mmio_enabled(pdev);
|
|
if (ers_result_indicates_abort(ers_res)) {
|
|
pr_info("%s: Automatic recovery failed after MMIO re-enable\n",
|
|
pci_name(pdev));
|
|
return ers_res;
|
|
} else if (ers_res == PCI_ERS_RESULT_NEED_RESET) {
|
|
pr_debug("%s: Driver needs reset to recover\n", pci_name(pdev));
|
|
return ers_res;
|
|
}
|
|
}
|
|
|
|
pr_debug("%s: Unblocking DMA\n", pci_name(pdev));
|
|
rc = zpci_clear_error_state(zdev);
|
|
if (!rc) {
|
|
pdev->error_state = pci_channel_io_normal;
|
|
} else {
|
|
pr_err("%s: Unblocking DMA failed\n", pci_name(pdev));
|
|
/* Let's try a full reset instead */
|
|
return PCI_ERS_RESULT_NEED_RESET;
|
|
}
|
|
|
|
return ers_res;
|
|
}
|
|
|
|
static pci_ers_result_t zpci_event_do_reset(struct pci_dev *pdev,
|
|
struct pci_driver *driver)
|
|
{
|
|
pci_ers_result_t ers_res = PCI_ERS_RESULT_DISCONNECT;
|
|
|
|
pr_info("%s: Initiating reset\n", pci_name(pdev));
|
|
if (zpci_hot_reset_device(to_zpci(pdev))) {
|
|
pr_err("%s: The reset request failed\n", pci_name(pdev));
|
|
return ers_res;
|
|
}
|
|
pdev->error_state = pci_channel_io_normal;
|
|
ers_res = driver->err_handler->slot_reset(pdev);
|
|
if (ers_result_indicates_abort(ers_res)) {
|
|
pr_info("%s: Automatic recovery failed after slot reset\n", pci_name(pdev));
|
|
return ers_res;
|
|
}
|
|
|
|
return ers_res;
|
|
}
|
|
|
|
/* zpci_event_attempt_error_recovery - Try to recover the given PCI function
|
|
* @pdev: PCI function to recover currently in the error state
|
|
*
|
|
* We follow the scheme outlined in Documentation/PCI/pci-error-recovery.rst.
|
|
* With the simplification that recovery always happens per function
|
|
* and the platform determines which functions are affected for
|
|
* multi-function devices.
|
|
*/
|
|
static pci_ers_result_t zpci_event_attempt_error_recovery(struct pci_dev *pdev)
|
|
{
|
|
pci_ers_result_t ers_res = PCI_ERS_RESULT_DISCONNECT;
|
|
struct pci_driver *driver;
|
|
|
|
/*
|
|
* Ensure that the PCI function is not removed concurrently, no driver
|
|
* is unbound or probed and that userspace can't access its
|
|
* configuration space while we perform recovery.
|
|
*/
|
|
pci_dev_lock(pdev);
|
|
if (pdev->error_state == pci_channel_io_perm_failure) {
|
|
ers_res = PCI_ERS_RESULT_DISCONNECT;
|
|
goto out_unlock;
|
|
}
|
|
pdev->error_state = pci_channel_io_frozen;
|
|
|
|
if (is_passed_through(to_zpci(pdev))) {
|
|
pr_info("%s: Cannot be recovered in the host because it is a pass-through device\n",
|
|
pci_name(pdev));
|
|
goto out_unlock;
|
|
}
|
|
|
|
driver = to_pci_driver(pdev->dev.driver);
|
|
if (!is_driver_supported(driver)) {
|
|
if (!driver)
|
|
pr_info("%s: Cannot be recovered because no driver is bound to the device\n",
|
|
pci_name(pdev));
|
|
else
|
|
pr_info("%s: The %s driver bound to the device does not support error recovery\n",
|
|
pci_name(pdev),
|
|
driver->name);
|
|
goto out_unlock;
|
|
}
|
|
|
|
ers_res = zpci_event_notify_error_detected(pdev, driver);
|
|
if (ers_result_indicates_abort(ers_res))
|
|
goto out_unlock;
|
|
|
|
if (ers_res == PCI_ERS_RESULT_CAN_RECOVER) {
|
|
ers_res = zpci_event_do_error_state_clear(pdev, driver);
|
|
if (ers_result_indicates_abort(ers_res))
|
|
goto out_unlock;
|
|
}
|
|
|
|
if (ers_res == PCI_ERS_RESULT_NEED_RESET)
|
|
ers_res = zpci_event_do_reset(pdev, driver);
|
|
|
|
if (ers_res != PCI_ERS_RESULT_RECOVERED) {
|
|
pr_err("%s: Automatic recovery failed; operator intervention is required\n",
|
|
pci_name(pdev));
|
|
goto out_unlock;
|
|
}
|
|
|
|
pr_info("%s: The device is ready to resume operations\n", pci_name(pdev));
|
|
if (driver->err_handler->resume)
|
|
driver->err_handler->resume(pdev);
|
|
out_unlock:
|
|
pci_dev_unlock(pdev);
|
|
|
|
return ers_res;
|
|
}
|
|
|
|
/* zpci_event_io_failure - Report PCI channel failure state to driver
|
|
* @pdev: PCI function for which to report
|
|
* @es: PCI channel failure state to report
|
|
*/
|
|
static void zpci_event_io_failure(struct pci_dev *pdev, pci_channel_state_t es)
|
|
{
|
|
struct pci_driver *driver;
|
|
|
|
pci_dev_lock(pdev);
|
|
pdev->error_state = es;
|
|
/**
|
|
* While vfio-pci's error_detected callback notifies user-space QEMU
|
|
* reacts to this by freezing the guest. In an s390 environment PCI
|
|
* errors are rarely fatal so this is overkill. Instead in the future
|
|
* we will inject the error event and let the guest recover the device
|
|
* itself.
|
|
*/
|
|
if (is_passed_through(to_zpci(pdev)))
|
|
goto out;
|
|
driver = to_pci_driver(pdev->dev.driver);
|
|
if (driver && driver->err_handler && driver->err_handler->error_detected)
|
|
driver->err_handler->error_detected(pdev, pdev->error_state);
|
|
out:
|
|
pci_dev_unlock(pdev);
|
|
}
|
|
|
|
static void __zpci_event_error(struct zpci_ccdf_err *ccdf)
|
|
{
|
|
struct zpci_dev *zdev = get_zdev_by_fid(ccdf->fid);
|
|
struct pci_dev *pdev = NULL;
|
|
pci_ers_result_t ers_res;
|
|
|
|
zpci_dbg(3, "err fid:%x, fh:%x, pec:%x\n",
|
|
ccdf->fid, ccdf->fh, ccdf->pec);
|
|
zpci_err("error CCDF:\n");
|
|
zpci_err_hex(ccdf, sizeof(*ccdf));
|
|
|
|
if (zdev) {
|
|
zpci_update_fh(zdev, ccdf->fh);
|
|
if (zdev->zbus->bus)
|
|
pdev = pci_get_slot(zdev->zbus->bus, zdev->devfn);
|
|
}
|
|
|
|
pr_err("%s: Event 0x%x reports an error for PCI function 0x%x\n",
|
|
pdev ? pci_name(pdev) : "n/a", ccdf->pec, ccdf->fid);
|
|
|
|
if (!pdev)
|
|
return;
|
|
|
|
switch (ccdf->pec) {
|
|
case 0x003a: /* Service Action or Error Recovery Successful */
|
|
ers_res = zpci_event_attempt_error_recovery(pdev);
|
|
if (ers_res != PCI_ERS_RESULT_RECOVERED)
|
|
zpci_event_io_failure(pdev, pci_channel_io_perm_failure);
|
|
break;
|
|
default:
|
|
/*
|
|
* Mark as frozen not permanently failed because the device
|
|
* could be subsequently recovered by the platform.
|
|
*/
|
|
zpci_event_io_failure(pdev, pci_channel_io_frozen);
|
|
break;
|
|
}
|
|
pci_dev_put(pdev);
|
|
}
|
|
|
|
void zpci_event_error(void *data)
|
|
{
|
|
if (zpci_is_enabled())
|
|
__zpci_event_error(data);
|
|
}
|
|
|
|
static void zpci_event_hard_deconfigured(struct zpci_dev *zdev, u32 fh)
|
|
{
|
|
zpci_update_fh(zdev, fh);
|
|
/* Give the driver a hint that the function is
|
|
* already unusable.
|
|
*/
|
|
zpci_bus_remove_device(zdev, true);
|
|
/* Even though the device is already gone we still
|
|
* need to free zPCI resources as part of the disable.
|
|
*/
|
|
if (zdev->dma_table)
|
|
zpci_dma_exit_device(zdev);
|
|
if (zdev_enabled(zdev))
|
|
zpci_disable_device(zdev);
|
|
zdev->state = ZPCI_FN_STATE_STANDBY;
|
|
}
|
|
|
|
static void __zpci_event_availability(struct zpci_ccdf_avail *ccdf)
|
|
{
|
|
struct zpci_dev *zdev = get_zdev_by_fid(ccdf->fid);
|
|
enum zpci_state state;
|
|
|
|
zpci_dbg(3, "avl fid:%x, fh:%x, pec:%x\n",
|
|
ccdf->fid, ccdf->fh, ccdf->pec);
|
|
zpci_err("avail CCDF:\n");
|
|
zpci_err_hex(ccdf, sizeof(*ccdf));
|
|
|
|
switch (ccdf->pec) {
|
|
case 0x0301: /* Reserved|Standby -> Configured */
|
|
if (!zdev) {
|
|
zdev = zpci_create_device(ccdf->fid, ccdf->fh, ZPCI_FN_STATE_CONFIGURED);
|
|
if (IS_ERR(zdev))
|
|
break;
|
|
} else {
|
|
/* the configuration request may be stale */
|
|
if (zdev->state != ZPCI_FN_STATE_STANDBY)
|
|
break;
|
|
zdev->state = ZPCI_FN_STATE_CONFIGURED;
|
|
}
|
|
zpci_scan_configured_device(zdev, ccdf->fh);
|
|
break;
|
|
case 0x0302: /* Reserved -> Standby */
|
|
if (!zdev)
|
|
zpci_create_device(ccdf->fid, ccdf->fh, ZPCI_FN_STATE_STANDBY);
|
|
else
|
|
zpci_update_fh(zdev, ccdf->fh);
|
|
break;
|
|
case 0x0303: /* Deconfiguration requested */
|
|
if (zdev) {
|
|
/* The event may have been queued before we confirgured
|
|
* the device.
|
|
*/
|
|
if (zdev->state != ZPCI_FN_STATE_CONFIGURED)
|
|
break;
|
|
zpci_update_fh(zdev, ccdf->fh);
|
|
zpci_deconfigure_device(zdev);
|
|
}
|
|
break;
|
|
case 0x0304: /* Configured -> Standby|Reserved */
|
|
if (zdev) {
|
|
/* The event may have been queued before we confirgured
|
|
* the device.:
|
|
*/
|
|
if (zdev->state == ZPCI_FN_STATE_CONFIGURED)
|
|
zpci_event_hard_deconfigured(zdev, ccdf->fh);
|
|
/* The 0x0304 event may immediately reserve the device */
|
|
if (!clp_get_state(zdev->fid, &state) &&
|
|
state == ZPCI_FN_STATE_RESERVED) {
|
|
zpci_device_reserved(zdev);
|
|
}
|
|
}
|
|
break;
|
|
case 0x0306: /* 0x308 or 0x302 for multiple devices */
|
|
zpci_remove_reserved_devices();
|
|
clp_scan_pci_devices();
|
|
break;
|
|
case 0x0308: /* Standby -> Reserved */
|
|
if (!zdev)
|
|
break;
|
|
zpci_device_reserved(zdev);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
void zpci_event_availability(void *data)
|
|
{
|
|
if (zpci_is_enabled())
|
|
__zpci_event_availability(data);
|
|
}
|