forked from Minki/linux
dbf7b5915b
This is a fairly quiet release in all sound area. Only a little bit
of changes in the core side while most of changes are seen in the
drivers.
HD-audio:
- A few new codec additions for Nvidia, Realtek and VIA
- Intel Haswell audio support
- Support for "phantom" jacks for consistent jack reporting
- Major clean-ups in HDMI/DP driver codes
- A workaround for inverted digital-mic pins with Realtek codecs
- Removal of beep_mode=2 option
ASoC:
- Added the ability to add and remove DAPM paths dynamically, mostly
for reparenting on clock changes
- New machine drivers for Marvell Brownstone, ST-Ericsson Ux500
reference platform and ttc-dkp
- New CPU drivers for Blackfin BF6xx SPORTs in I2S mode, Marvell MMP,
Synopsis Designware I2S controllers, and SPEAr DMA and S/PDIF
- New CODEC drivers for Dialog DA732x, ST STA529, ST-Ericsson AB8500,
TI Isabelle and Wolfson Microelectronics WM5102 and WM5110
- DAPM fixes for the recent locking changes
- Fix for _PRE and _POST widgets (which have been broken for a few
releases now)
- A couple of minor driver updates
Misc
- Conversion to new dev_pm_ops in platform and PCI drivers
- LTC support and some fixes in PCXHR driver
- A few fixes and PM support for ISA OPti9xx and WSS cards
- Some TLV code cleanup
- Move driver-specific headers from include/sound to local dirs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=N0aj
-----END PGP SIGNATURE-----
Merge tag 'sound-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound update from Takashi Iwai:
"This is a fairly quiet release in all sound area. Only a little bit
of changes in the core side while most of changes are seen in the
drivers.
HD-audio:
- A few new codec additions for Nvidia, Realtek and VIA
- Intel Haswell audio support
- Support for "phantom" jacks for consistent jack reporting
- Major clean-ups in HDMI/DP driver codes
- A workaround for inverted digital-mic pins with Realtek codecs
- Removal of beep_mode=2 option
ASoC:
- Added the ability to add and remove DAPM paths dynamically, mostly
for reparenting on clock changes
- New machine drivers for Marvell Brownstone, ST-Ericsson Ux500
reference platform and ttc-dkp
- New CPU drivers for Blackfin BF6xx SPORTs in I2S mode, Marvell MMP,
Synopsis Designware I2S controllers, and SPEAr DMA and S/PDIF
- New CODEC drivers for Dialog DA732x, ST STA529, ST-Ericsson AB8500,
TI Isabelle and Wolfson Microelectronics WM5102 and WM5110
- DAPM fixes for the recent locking changes
- Fix for _PRE and _POST widgets (which have been broken for a few
releases now)
- A couple of minor driver updates
Misc
- Conversion to new dev_pm_ops in platform and PCI drivers
- LTC support and some fixes in PCXHR driver
- A few fixes and PM support for ISA OPti9xx and WSS cards
- Some TLV code cleanup
- Move driver-specific headers from include/sound to local dirs"
* tag 'sound-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (212 commits)
ASoC: dapm: Fix _PRE and _POST events for DAPM performance improvements
ALSA: hda - add dock support for Thinkpad X230 Tablet
ALSA: hda - Turn on PIN_OUT from hdmi playback prepare.
ASoC imx-audmux: add MX31_AUDMUX_PORT7_SSI_PINS_7 define
ASoC: littlemill: Add userspace control of the WM1250 I/O
ASoC: wm8994: Update micdet for irqdomain conversion
ALSA: hda - make sure alc268 does not OOPS on codec parse
ALSA: hda - Add support for Realtek ALC282
ALSA: hda - Fix index number conflicts of phantom jacks
ALSA: opti9xx: Fix section mismatch by PM support
ALSA: snd-opti9xx: Implement suspend/resume
ALSA: hda - Add new GPU codec ID to snd-hda
ALSA: hda - Fix driver type of Haswell controller to AZX_DRIVER_SCH
ALSA: hda - add Haswell HDMI codec id
ALSA: hda - Add DeviceID for Haswell HDA
ALSA: wss_lib: Fix resume on Yamaha OPL3-SAx
ALSA: wss_lib: fix suspend/resume
ALSA: es1938: replace TLV_DB_RANGE_HEAD with DECLARE_TLV_DB_RANGE
ALSA: tlv: add DECLARE_TLV_DB_RANGE()
ALSA: tlv: add DECLARE_TLV_CONTAINER()
...
90 lines
3.0 KiB
Plaintext
90 lines
3.0 KiB
Plaintext
config SND_SOC_TEGRA
|
|
tristate "SoC Audio for the Tegra System-on-Chip"
|
|
depends on ARCH_TEGRA && (TEGRA_SYSTEM_DMA || TEGRA20_APB_DMA)
|
|
select REGMAP_MMIO
|
|
select SND_SOC_DMAENGINE_PCM if TEGRA20_APB_DMA
|
|
help
|
|
Say Y or M here if you want support for SoC audio on Tegra.
|
|
|
|
config SND_SOC_TEGRA20_DAS
|
|
tristate
|
|
depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC
|
|
help
|
|
Say Y or M if you want to add support for the Tegra20 DAS module.
|
|
You will also need to select the individual machine drivers to
|
|
support below.
|
|
|
|
config SND_SOC_TEGRA20_I2S
|
|
tristate
|
|
depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC
|
|
select SND_SOC_TEGRA20_DAS
|
|
help
|
|
Say Y or M if you want to add support for codecs attached to the
|
|
Tegra20 I2S interface. You will also need to select the individual
|
|
machine drivers to support below.
|
|
|
|
config SND_SOC_TEGRA20_SPDIF
|
|
tristate
|
|
depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC
|
|
default m
|
|
help
|
|
Say Y or M if you want to add support for the Tegra20 SPDIF interface.
|
|
You will also need to select the individual machine drivers to support
|
|
below.
|
|
|
|
config SND_SOC_TEGRA30_AHUB
|
|
tristate
|
|
depends on SND_SOC_TEGRA && ARCH_TEGRA_3x_SOC
|
|
help
|
|
Say Y or M if you want to add support for the Tegra20 AHUB module.
|
|
You will also need to select the individual machine drivers to
|
|
support below.
|
|
|
|
config SND_SOC_TEGRA30_I2S
|
|
tristate
|
|
depends on SND_SOC_TEGRA && ARCH_TEGRA_3x_SOC
|
|
select SND_SOC_TEGRA30_AHUB
|
|
help
|
|
Say Y or M if you want to add support for codecs attached to the
|
|
Tegra30 I2S interface. You will also need to select the individual
|
|
machine drivers to support below.
|
|
|
|
config SND_SOC_TEGRA_WM8753
|
|
tristate "SoC Audio support for Tegra boards using a WM8753 codec"
|
|
depends on SND_SOC_TEGRA && I2C
|
|
select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
|
|
select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC
|
|
select SND_SOC_WM8753
|
|
help
|
|
Say Y or M here if you want to add support for SoC audio on Tegra
|
|
boards using the WM8753 codec, such as Whistler.
|
|
|
|
config SND_SOC_TEGRA_WM8903
|
|
tristate "SoC Audio support for Tegra boards using a WM8903 codec"
|
|
depends on SND_SOC_TEGRA && I2C
|
|
select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
|
|
select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC
|
|
select SND_SOC_WM8903
|
|
help
|
|
Say Y or M here if you want to add support for SoC audio on Tegra
|
|
boards using the WM8093 codec. Currently, the supported boards are
|
|
Harmony, Ventana, Seaboard, Kaen, and Aebl.
|
|
|
|
config SND_SOC_TEGRA_TRIMSLICE
|
|
tristate "SoC Audio support for TrimSlice board"
|
|
depends on SND_SOC_TEGRA && I2C
|
|
select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
|
|
select SND_SOC_TLV320AIC23
|
|
help
|
|
Say Y or M here if you want to add support for SoC audio on the
|
|
TrimSlice platform.
|
|
|
|
config SND_SOC_TEGRA_ALC5632
|
|
tristate "SoC Audio support for Tegra boards using an ALC5632 codec"
|
|
depends on SND_SOC_TEGRA && I2C
|
|
select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
|
|
select SND_SOC_ALC5632
|
|
help
|
|
Say Y or M here if you want to add support for SoC audio on the
|
|
Toshiba AC100 netbook.
|