linux/fs/ext4/file.c
Darrick J. Wong cf8039036a ext4: prevent stack overrun in ext4_file_open
In ext4_file_open, the filesystem records the mountpoint of the first
file that is opened after mounting the filesystem.  It does this by
allocating a 64-byte stack buffer, calling d_path() to grab the mount
point through which this file was accessed, and then memcpy()ing 64
bytes into the superblock's s_last_mounted field, starting from the
return value of d_path(), which is stored as "cp".  However, if cp >
buf (which it frequently is since path components are prepended
starting at the end of buf) then we can end up copying stack data into
the superblock.

Writing stack variables into the superblock doesn't sound like a great
idea, so use strlcpy instead.  Andi Kleen suggested using strlcpy
instead of strncpy.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-25 09:18:41 -04:00

308 lines
8.2 KiB
C

/*
* linux/fs/ext4/file.c
*
* Copyright (C) 1992, 1993, 1994, 1995
* Remy Card (card@masi.ibp.fr)
* Laboratoire MASI - Institut Blaise Pascal
* Universite Pierre et Marie Curie (Paris VI)
*
* from
*
* linux/fs/minix/file.c
*
* Copyright (C) 1991, 1992 Linus Torvalds
*
* ext4 fs regular file handling primitives
*
* 64-bit file support on 64-bit platforms by Jakub Jelinek
* (jj@sunsite.ms.mff.cuni.cz)
*/
#include <linux/time.h>
#include <linux/fs.h>
#include <linux/jbd2.h>
#include <linux/mount.h>
#include <linux/path.h>
#include <linux/quotaops.h>
#include "ext4.h"
#include "ext4_jbd2.h"
#include "xattr.h"
#include "acl.h"
/*
* Called when an inode is released. Note that this is different
* from ext4_file_open: open gets called at every open, but release
* gets called only when /all/ the files are closed.
*/
static int ext4_release_file(struct inode *inode, struct file *filp)
{
if (ext4_test_inode_state(inode, EXT4_STATE_DA_ALLOC_CLOSE)) {
ext4_alloc_da_blocks(inode);
ext4_clear_inode_state(inode, EXT4_STATE_DA_ALLOC_CLOSE);
}
/* if we are the last writer on the inode, drop the block reservation */
if ((filp->f_mode & FMODE_WRITE) &&
(atomic_read(&inode->i_writecount) == 1) &&
!EXT4_I(inode)->i_reserved_data_blocks)
{
down_write(&EXT4_I(inode)->i_data_sem);
ext4_discard_preallocations(inode);
up_write(&EXT4_I(inode)->i_data_sem);
}
if (is_dx(inode) && filp->private_data)
ext4_htree_free_dir_info(filp->private_data);
return 0;
}
static void ext4_aiodio_wait(struct inode *inode)
{
wait_queue_head_t *wq = ext4_ioend_wq(inode);
wait_event(*wq, (atomic_read(&EXT4_I(inode)->i_aiodio_unwritten) == 0));
}
/*
* This tests whether the IO in question is block-aligned or not.
* Ext4 utilizes unwritten extents when hole-filling during direct IO, and they
* are converted to written only after the IO is complete. Until they are
* mapped, these blocks appear as holes, so dio_zero_block() will assume that
* it needs to zero out portions of the start and/or end block. If 2 AIO
* threads are at work on the same unwritten block, they must be synchronized
* or one thread will zero the other's data, causing corruption.
*/
static int
ext4_unaligned_aio(struct inode *inode, const struct iovec *iov,
unsigned long nr_segs, loff_t pos)
{
struct super_block *sb = inode->i_sb;
int blockmask = sb->s_blocksize - 1;
size_t count = iov_length(iov, nr_segs);
loff_t final_size = pos + count;
if (pos >= inode->i_size)
return 0;
if ((pos & blockmask) || (final_size & blockmask))
return 1;
return 0;
}
static ssize_t
ext4_file_write(struct kiocb *iocb, const struct iovec *iov,
unsigned long nr_segs, loff_t pos)
{
struct inode *inode = iocb->ki_filp->f_path.dentry->d_inode;
int unaligned_aio = 0;
int ret;
/*
* If we have encountered a bitmap-format file, the size limit
* is smaller than s_maxbytes, which is for extent-mapped files.
*/
if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))) {
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
size_t length = iov_length(iov, nr_segs);
if ((pos > sbi->s_bitmap_maxbytes ||
(pos == sbi->s_bitmap_maxbytes && length > 0)))
return -EFBIG;
if (pos + length > sbi->s_bitmap_maxbytes) {
nr_segs = iov_shorten((struct iovec *)iov, nr_segs,
sbi->s_bitmap_maxbytes - pos);
}
} else if (unlikely((iocb->ki_filp->f_flags & O_DIRECT) &&
!is_sync_kiocb(iocb))) {
unaligned_aio = ext4_unaligned_aio(inode, iov, nr_segs, pos);
}
/* Unaligned direct AIO must be serialized; see comment above */
if (unaligned_aio) {
static unsigned long unaligned_warn_time;
/* Warn about this once per day */
if (printk_timed_ratelimit(&unaligned_warn_time, 60*60*24*HZ))
ext4_msg(inode->i_sb, KERN_WARNING,
"Unaligned AIO/DIO on inode %ld by %s; "
"performance will be poor.",
inode->i_ino, current->comm);
mutex_lock(ext4_aio_mutex(inode));
ext4_aiodio_wait(inode);
}
ret = generic_file_aio_write(iocb, iov, nr_segs, pos);
if (unaligned_aio)
mutex_unlock(ext4_aio_mutex(inode));
return ret;
}
static const struct vm_operations_struct ext4_file_vm_ops = {
.fault = filemap_fault,
.page_mkwrite = ext4_page_mkwrite,
};
static int ext4_file_mmap(struct file *file, struct vm_area_struct *vma)
{
struct address_space *mapping = file->f_mapping;
if (!mapping->a_ops->readpage)
return -ENOEXEC;
file_accessed(file);
vma->vm_ops = &ext4_file_vm_ops;
vma->vm_flags |= VM_CAN_NONLINEAR;
return 0;
}
static int ext4_file_open(struct inode * inode, struct file * filp)
{
struct super_block *sb = inode->i_sb;
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
struct ext4_inode_info *ei = EXT4_I(inode);
struct vfsmount *mnt = filp->f_path.mnt;
struct path path;
char buf[64], *cp;
if (unlikely(!(sbi->s_mount_flags & EXT4_MF_MNTDIR_SAMPLED) &&
!(sb->s_flags & MS_RDONLY))) {
sbi->s_mount_flags |= EXT4_MF_MNTDIR_SAMPLED;
/*
* Sample where the filesystem has been mounted and
* store it in the superblock for sysadmin convenience
* when trying to sort through large numbers of block
* devices or filesystem images.
*/
memset(buf, 0, sizeof(buf));
path.mnt = mnt;
path.dentry = mnt->mnt_root;
cp = d_path(&path, buf, sizeof(buf));
if (!IS_ERR(cp)) {
strlcpy(sbi->s_es->s_last_mounted, cp,
sizeof(sbi->s_es->s_last_mounted));
ext4_mark_super_dirty(sb);
}
}
/*
* Set up the jbd2_inode if we are opening the inode for
* writing and the journal is present
*/
if (sbi->s_journal && !ei->jinode && (filp->f_mode & FMODE_WRITE)) {
struct jbd2_inode *jinode = jbd2_alloc_inode(GFP_KERNEL);
spin_lock(&inode->i_lock);
if (!ei->jinode) {
if (!jinode) {
spin_unlock(&inode->i_lock);
return -ENOMEM;
}
ei->jinode = jinode;
jbd2_journal_init_jbd_inode(ei->jinode, inode);
jinode = NULL;
}
spin_unlock(&inode->i_lock);
if (unlikely(jinode != NULL))
jbd2_free_inode(jinode);
}
return dquot_file_open(inode, filp);
}
/*
* ext4_llseek() copied from generic_file_llseek() to handle both
* block-mapped and extent-mapped maxbytes values. This should
* otherwise be identical with generic_file_llseek().
*/
loff_t ext4_llseek(struct file *file, loff_t offset, int origin)
{
struct inode *inode = file->f_mapping->host;
loff_t maxbytes;
if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)))
maxbytes = EXT4_SB(inode->i_sb)->s_bitmap_maxbytes;
else
maxbytes = inode->i_sb->s_maxbytes;
mutex_lock(&inode->i_mutex);
switch (origin) {
case SEEK_END:
offset += inode->i_size;
break;
case SEEK_CUR:
if (offset == 0) {
mutex_unlock(&inode->i_mutex);
return file->f_pos;
}
offset += file->f_pos;
break;
case SEEK_DATA:
/*
* In the generic case the entire file is data, so as long as
* offset isn't at the end of the file then the offset is data.
*/
if (offset >= inode->i_size) {
mutex_unlock(&inode->i_mutex);
return -ENXIO;
}
break;
case SEEK_HOLE:
/*
* There is a virtual hole at the end of the file, so as long as
* offset isn't i_size or larger, return i_size.
*/
if (offset >= inode->i_size) {
mutex_unlock(&inode->i_mutex);
return -ENXIO;
}
offset = inode->i_size;
break;
}
if (offset < 0 || offset > maxbytes) {
mutex_unlock(&inode->i_mutex);
return -EINVAL;
}
if (offset != file->f_pos) {
file->f_pos = offset;
file->f_version = 0;
}
mutex_unlock(&inode->i_mutex);
return offset;
}
const struct file_operations ext4_file_operations = {
.llseek = ext4_llseek,
.read = do_sync_read,
.write = do_sync_write,
.aio_read = generic_file_aio_read,
.aio_write = ext4_file_write,
.unlocked_ioctl = ext4_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = ext4_compat_ioctl,
#endif
.mmap = ext4_file_mmap,
.open = ext4_file_open,
.release = ext4_release_file,
.fsync = ext4_sync_file,
.splice_read = generic_file_splice_read,
.splice_write = generic_file_splice_write,
.fallocate = ext4_fallocate,
};
const struct inode_operations ext4_file_inode_operations = {
.setattr = ext4_setattr,
.getattr = ext4_getattr,
#ifdef CONFIG_EXT4_FS_XATTR
.setxattr = generic_setxattr,
.getxattr = generic_getxattr,
.listxattr = ext4_listxattr,
.removexattr = generic_removexattr,
#endif
.get_acl = ext4_get_acl,
.fiemap = ext4_fiemap,
};