linux/drivers/net/dsa/vitesse-vsc73xx-spi.c
Uwe Kleine-König a0386bba70
spi: make remove callback a void function
The value returned by an spi driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)

So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Claudius Heine <ch@denx.de>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Acked-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Acked-by: Łukasz Stelmach <l.stelmach@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220123175201.34839-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-09 13:00:45 +00:00

222 lines
4.9 KiB
C

// SPDX-License-Identifier: GPL-2.0
/* DSA driver for:
* Vitesse VSC7385 SparX-G5 5+1-port Integrated Gigabit Ethernet Switch
* Vitesse VSC7388 SparX-G8 8-port Integrated Gigabit Ethernet Switch
* Vitesse VSC7395 SparX-G5e 5+1-port Integrated Gigabit Ethernet Switch
* Vitesse VSC7398 SparX-G8e 8-port Integrated Gigabit Ethernet Switch
*
* This driver takes control of the switch chip over SPI and
* configures it to route packages around when connected to a CPU port.
*
* Copyright (C) 2018 Linus Wallej <linus.walleij@linaro.org>
* Includes portions of code from the firmware uploader by:
* Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/spi/spi.h>
#include "vitesse-vsc73xx.h"
#define VSC73XX_CMD_SPI_MODE_READ 0
#define VSC73XX_CMD_SPI_MODE_WRITE 1
#define VSC73XX_CMD_SPI_MODE_SHIFT 4
#define VSC73XX_CMD_SPI_BLOCK_SHIFT 5
#define VSC73XX_CMD_SPI_BLOCK_MASK 0x7
#define VSC73XX_CMD_SPI_SUBBLOCK_MASK 0xf
/*
* struct vsc73xx_spi - VSC73xx SPI state container
*/
struct vsc73xx_spi {
struct spi_device *spi;
struct mutex lock; /* Protects SPI traffic */
struct vsc73xx vsc;
};
static const struct vsc73xx_ops vsc73xx_spi_ops;
static u8 vsc73xx_make_addr(u8 mode, u8 block, u8 subblock)
{
u8 ret;
ret =
(block & VSC73XX_CMD_SPI_BLOCK_MASK) << VSC73XX_CMD_SPI_BLOCK_SHIFT;
ret |= (mode & 1) << VSC73XX_CMD_SPI_MODE_SHIFT;
ret |= subblock & VSC73XX_CMD_SPI_SUBBLOCK_MASK;
return ret;
}
static int vsc73xx_spi_read(struct vsc73xx *vsc, u8 block, u8 subblock, u8 reg,
u32 *val)
{
struct vsc73xx_spi *vsc_spi = vsc->priv;
struct spi_transfer t[2];
struct spi_message m;
u8 cmd[4];
u8 buf[4];
int ret;
if (!vsc73xx_is_addr_valid(block, subblock))
return -EINVAL;
spi_message_init(&m);
memset(&t, 0, sizeof(t));
t[0].tx_buf = cmd;
t[0].len = sizeof(cmd);
spi_message_add_tail(&t[0], &m);
t[1].rx_buf = buf;
t[1].len = sizeof(buf);
spi_message_add_tail(&t[1], &m);
cmd[0] = vsc73xx_make_addr(VSC73XX_CMD_SPI_MODE_READ, block, subblock);
cmd[1] = reg;
cmd[2] = 0;
cmd[3] = 0;
mutex_lock(&vsc_spi->lock);
ret = spi_sync(vsc_spi->spi, &m);
mutex_unlock(&vsc_spi->lock);
if (ret)
return ret;
*val = (buf[0] << 24) | (buf[1] << 16) | (buf[2] << 8) | buf[3];
return 0;
}
static int vsc73xx_spi_write(struct vsc73xx *vsc, u8 block, u8 subblock, u8 reg,
u32 val)
{
struct vsc73xx_spi *vsc_spi = vsc->priv;
struct spi_transfer t[2];
struct spi_message m;
u8 cmd[2];
u8 buf[4];
int ret;
if (!vsc73xx_is_addr_valid(block, subblock))
return -EINVAL;
spi_message_init(&m);
memset(&t, 0, sizeof(t));
t[0].tx_buf = cmd;
t[0].len = sizeof(cmd);
spi_message_add_tail(&t[0], &m);
t[1].tx_buf = buf;
t[1].len = sizeof(buf);
spi_message_add_tail(&t[1], &m);
cmd[0] = vsc73xx_make_addr(VSC73XX_CMD_SPI_MODE_WRITE, block, subblock);
cmd[1] = reg;
buf[0] = (val >> 24) & 0xff;
buf[1] = (val >> 16) & 0xff;
buf[2] = (val >> 8) & 0xff;
buf[3] = val & 0xff;
mutex_lock(&vsc_spi->lock);
ret = spi_sync(vsc_spi->spi, &m);
mutex_unlock(&vsc_spi->lock);
return ret;
}
static int vsc73xx_spi_probe(struct spi_device *spi)
{
struct device *dev = &spi->dev;
struct vsc73xx_spi *vsc_spi;
int ret;
vsc_spi = devm_kzalloc(dev, sizeof(*vsc_spi), GFP_KERNEL);
if (!vsc_spi)
return -ENOMEM;
spi_set_drvdata(spi, vsc_spi);
vsc_spi->spi = spi_dev_get(spi);
vsc_spi->vsc.dev = dev;
vsc_spi->vsc.priv = vsc_spi;
vsc_spi->vsc.ops = &vsc73xx_spi_ops;
mutex_init(&vsc_spi->lock);
spi->mode = SPI_MODE_0;
spi->bits_per_word = 8;
ret = spi_setup(spi);
if (ret < 0) {
dev_err(dev, "spi setup failed.\n");
return ret;
}
return vsc73xx_probe(&vsc_spi->vsc);
}
static void vsc73xx_spi_remove(struct spi_device *spi)
{
struct vsc73xx_spi *vsc_spi = spi_get_drvdata(spi);
if (!vsc_spi)
return;
vsc73xx_remove(&vsc_spi->vsc);
spi_set_drvdata(spi, NULL);
}
static void vsc73xx_spi_shutdown(struct spi_device *spi)
{
struct vsc73xx_spi *vsc_spi = spi_get_drvdata(spi);
if (!vsc_spi)
return;
vsc73xx_shutdown(&vsc_spi->vsc);
spi_set_drvdata(spi, NULL);
}
static const struct vsc73xx_ops vsc73xx_spi_ops = {
.read = vsc73xx_spi_read,
.write = vsc73xx_spi_write,
};
static const struct of_device_id vsc73xx_of_match[] = {
{
.compatible = "vitesse,vsc7385",
},
{
.compatible = "vitesse,vsc7388",
},
{
.compatible = "vitesse,vsc7395",
},
{
.compatible = "vitesse,vsc7398",
},
{ },
};
MODULE_DEVICE_TABLE(of, vsc73xx_of_match);
static struct spi_driver vsc73xx_spi_driver = {
.probe = vsc73xx_spi_probe,
.remove = vsc73xx_spi_remove,
.shutdown = vsc73xx_spi_shutdown,
.driver = {
.name = "vsc73xx-spi",
.of_match_table = vsc73xx_of_match,
},
};
module_spi_driver(vsc73xx_spi_driver);
MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
MODULE_DESCRIPTION("Vitesse VSC7385/7388/7395/7398 SPI driver");
MODULE_LICENSE("GPL v2");