linux/drivers/mtd/nand
Md Sadre Alam ba7542eb2d mtd: rawnand: qcom: fix memory corruption that causes panic
This patch fixes a memory corruption that occurred in the
nand_scan() path for Hynix nand device.

On boot, for Hynix nand device will panic at a weird place:
| Unable to handle kernel NULL pointer dereference at virtual
  address 00000070
| [00000070] *pgd=00000000
| Internal error: Oops: 5 [#1] PREEMPT SMP ARM
| Modules linked in:
| CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.17.0-01473-g13ae1769cfb0
  #38
| Hardware name: Generic DT based system
| PC is at nandc_set_reg+0x8/0x1c
| LR is at qcom_nandc_command+0x20c/0x5d0
| pc : [<c088b74c>]    lr : [<c088d9c8>]    psr: 00000113
| sp : c14adc50  ip : c14ee208  fp : c0cc970c
| r10: 000000a3  r9 : 00000000  r8 : 00000040
| r7 : c16f6a00  r6 : 00000090  r5 : 00000004  r4 :c14ee040
| r3 : 00000000  r2 : 0000000b  r1 : 00000000  r0 :c14ee040
| Flags: nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM Segment none
| Control: 10c5387d  Table: 8020406a  DAC: 00000051
| Register r0 information: slab kmalloc-2k start c14ee000 pointer offset
  64 size 2048
| Process swapper/0 (pid: 1, stack limit = 0x(ptrval))
| nandc_set_reg from qcom_nandc_command+0x20c/0x5d0
| qcom_nandc_command from nand_readid_op+0x198/0x1e8
| nand_readid_op from hynix_nand_has_valid_jedecid+0x30/0x78
| hynix_nand_has_valid_jedecid from hynix_nand_init+0xb8/0x454
| hynix_nand_init from nand_scan_with_ids+0xa30/0x14a8
| nand_scan_with_ids from qcom_nandc_probe+0x648/0x7b0
| qcom_nandc_probe from platform_probe+0x58/0xac

The problem is that the nand_scan()'s qcom_nand_attach_chip callback
is updating the nandc->max_cwperpage from 1 to 4 or 8 based on page size.
This causes the sg_init_table of clear_bam_transaction() in the driver's
qcom_nandc_command() to memset much more than what was initially
allocated by alloc_bam_transaction().

This patch will update nandc->max_cwperpage 1 to 4 or 8 based on page
size in qcom_nand_attach_chip call back after freeing the previously
allocated memory for bam txn as per nandc->max_cwperpage = 1 and then
again allocating bam txn as per nandc->max_cwperpage = 4 or 8 based on
page size in qcom_nand_attach_chip call back itself.

Cc: stable@vger.kernel.org
Fixes: 6a3cec64f1 ("mtd: rawnand: qcom: convert driver to nand_scan()")
Reported-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Co-developed-by: Sricharan R <quic_srichara@quicinc.com>
Signed-off-by: Sricharan R <quic_srichara@quicinc.com>
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/1650268107-5363-1-git-send-email-quic_mdalam@quicinc.com
2022-04-21 09:29:07 +02:00
..
onenand mtd: onenand: Check for error irq 2022-01-23 16:37:17 +01:00
raw mtd: rawnand: qcom: fix memory corruption that causes panic 2022-04-21 09:29:07 +02:00
spi mtd: spinand: Create direct mapping descriptors for ECC operations 2022-02-10 09:32:30 +01:00
bbt.c mtd: nand: bbt: Fix corner case in bad block table handling 2021-05-10 18:20:54 +02:00
core.c Topic branch bringing-in changes related to the support of ECC engines 2022-02-18 15:11:12 +01:00
ecc-mxic.c mtd: nand: mxic-ecc: make two read-only arrays static const 2022-03-14 17:01:58 +01:00
ecc-sw-bch.c mtd: nand: ecc-bch: Use the public nsteps field 2021-03-11 09:37:28 +01:00
ecc-sw-hamming.c mtd: rawnand: Let callers use the bare Hamming helpers 2021-10-15 12:20:59 +02:00
ecc.c mtd: nand: ecc: Provide a helper to retrieve a pilelined engine device 2022-02-09 09:49:36 +01:00
Kconfig mtd: nand: ecc: mxic: Fix compile test issue 2022-03-14 17:05:35 +01:00
Makefile mtd: nand: mxic-ecc: Add Macronix external ECC engine support 2022-02-09 09:49:25 +01:00