forked from Minki/linux
5405c92bc2
Most of DT files in PowerPC use #include "..." to make pre-processor include DT in the same directory, but we have 3 exceptional files that use #include <...> for that. Fix them to remove -I$(srctree)/arch/$(SRCARCH)/boot/dts path from dtc_cpp_flags. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
179 lines
3.6 KiB
Plaintext
179 lines
3.6 KiB
Plaintext
/*
|
|
* MPC5121E ADS Device Tree Source
|
|
*
|
|
* Copyright 2007-2008 Freescale Semiconductor Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
#include "mpc5121.dtsi"
|
|
|
|
/ {
|
|
model = "mpc5121ads";
|
|
compatible = "fsl,mpc5121ads", "fsl,mpc5121";
|
|
|
|
nfc@40000000 {
|
|
/*
|
|
* ADS has two Hynix 512MB Nand flash chips in a single
|
|
* stacked package.
|
|
*/
|
|
chips = <2>;
|
|
|
|
nand@0 {
|
|
label = "nand";
|
|
reg = <0x00000000 0x40000000>; /* 512MB + 512MB */
|
|
};
|
|
};
|
|
|
|
localbus@80000020 {
|
|
ranges = <0x0 0x0 0xfc000000 0x04000000
|
|
0x2 0x0 0x82000000 0x00008000>;
|
|
|
|
flash@0,0 {
|
|
compatible = "cfi-flash";
|
|
reg = <0 0x0 0x4000000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
bank-width = <4>;
|
|
device-width = <2>;
|
|
|
|
protected@0 {
|
|
label = "protected";
|
|
reg = <0x00000000 0x00040000>; // first sector is protected
|
|
read-only;
|
|
};
|
|
filesystem@40000 {
|
|
label = "filesystem";
|
|
reg = <0x00040000 0x03c00000>; // 60M for filesystem
|
|
};
|
|
kernel@3c40000 {
|
|
label = "kernel";
|
|
reg = <0x03c40000 0x00280000>; // 2.5M for kernel
|
|
};
|
|
device-tree@3ec0000 {
|
|
label = "device-tree";
|
|
reg = <0x03ec0000 0x00040000>; // one sector for device tree
|
|
};
|
|
u-boot@3f00000 {
|
|
label = "u-boot";
|
|
reg = <0x03f00000 0x00100000>; // 1M for u-boot
|
|
read-only;
|
|
};
|
|
};
|
|
|
|
board-control@2,0 {
|
|
compatible = "fsl,mpc5121ads-cpld";
|
|
reg = <0x2 0x0 0x8000>;
|
|
};
|
|
|
|
cpld_pic: pic@2,a {
|
|
compatible = "fsl,mpc5121ads-cpld-pic";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x2 0xa 0x5>;
|
|
/* irq routing:
|
|
* all irqs but touch screen are routed to irq0 (ipic 48)
|
|
* touch screen is statically routed to irq1 (ipic 17)
|
|
* so don't use it here
|
|
*/
|
|
interrupts = <48 0x8>;
|
|
};
|
|
};
|
|
|
|
soc@80000000 {
|
|
|
|
i2c@1700 {
|
|
fsl,preserve-clocking;
|
|
|
|
hwmon@4a {
|
|
compatible = "adi,ad7414";
|
|
reg = <0x4a>;
|
|
};
|
|
|
|
eeprom@50 {
|
|
compatible = "atmel,24c32";
|
|
reg = <0x50>;
|
|
};
|
|
|
|
rtc@68 {
|
|
compatible = "st,m41t62";
|
|
reg = <0x68>;
|
|
};
|
|
};
|
|
|
|
eth0: ethernet@2800 {
|
|
phy-handle = <&phy0>;
|
|
};
|
|
|
|
can@2300 {
|
|
status = "disabled";
|
|
};
|
|
|
|
can@2380 {
|
|
status = "disabled";
|
|
};
|
|
|
|
viu@2400 {
|
|
status = "disabled";
|
|
};
|
|
|
|
mdio@2800 {
|
|
phy0: ethernet-phy@0 {
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
/* mpc5121ads only uses USB0 */
|
|
usb@3000 {
|
|
status = "disabled";
|
|
};
|
|
|
|
/* USB0 using internal UTMI PHY */
|
|
usb@4000 {
|
|
dr_mode = "host";
|
|
fsl,invert-drvvbus;
|
|
fsl,invert-pwr-fault;
|
|
};
|
|
|
|
/* PSC3 serial port A aka ttyPSC0 */
|
|
psc@11300 {
|
|
compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
|
|
};
|
|
|
|
/* PSC4 serial port B aka ttyPSC1 */
|
|
psc@11400 {
|
|
compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
|
|
};
|
|
|
|
/* PSC5 in ac97 mode */
|
|
ac97: psc@11500 {
|
|
compatible = "fsl,mpc5121-psc-ac97", "fsl,mpc5121-psc";
|
|
fsl,mode = "ac97-slave";
|
|
fsl,rx-fifo-size = <384>;
|
|
fsl,tx-fifo-size = <384>;
|
|
};
|
|
};
|
|
|
|
pci: pci@80008500 {
|
|
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
|
interrupt-map = <
|
|
/* IDSEL 0x15 - Slot 1 PCI */
|
|
0xa800 0x0 0x0 0x1 &cpld_pic 0x0 0x8
|
|
0xa800 0x0 0x0 0x2 &cpld_pic 0x1 0x8
|
|
0xa800 0x0 0x0 0x3 &cpld_pic 0x2 0x8
|
|
0xa800 0x0 0x0 0x4 &cpld_pic 0x3 0x8
|
|
|
|
/* IDSEL 0x16 - Slot 2 MiniPCI */
|
|
0xb000 0x0 0x0 0x1 &cpld_pic 0x4 0x8
|
|
0xb000 0x0 0x0 0x2 &cpld_pic 0x5 0x8
|
|
|
|
/* IDSEL 0x17 - Slot 3 MiniPCI */
|
|
0xb800 0x0 0x0 0x1 &cpld_pic 0x6 0x8
|
|
0xb800 0x0 0x0 0x2 &cpld_pic 0x7 0x8
|
|
>;
|
|
};
|
|
};
|