forked from Minki/linux
7ae0ae4a02
Quite a lot of cleanup and maintainence work going on this release in various drivers, and also a fix for a nasty locking issue in the core: - A fix for locking issues when external drivers explicitly locked the bus with spi_bus_lock() - we were using the same lock to both control access to the physical bus in multi-threaded I/O operations and exclude multiple callers. Confusion between these two caused us to have scenarios where we were dropping locks. These are fixed by splitting into two separate locks like should have been done originally, making everything much clearer and correct. - Support for DMA in spi_flash_read(). - Support for instantiating spidev on ACPI systems, including some test devices used in Windows validation. - Use of the core DMA mapping functionality in the McSPI driver. - Start of support for ThunderX SPI controllers, involving a very big set of changes to the Cavium driver. - Support for Braswell, Exynos 5433, Kaby Lake, Merrifield, RK3036, RK3228, RK3368 controllers. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJXmPFBAAoJECTWi3JdVIfQbisH/355nT/cyqc08l9iC+a1zRDw /Bf5kN8pqmu6+y3sMjAIdptZQTlXhgR4q1ZH+oNSfowCVgvJYWF6RVCEXDBh6XHs YBQAFlYeSOO5cLTPQSDnn06oFucV/HZJppC6hM0SNclbVboeMBBS6S6aljXqMbj+ mFvtq6/iEsG6kgQcmcl3fm/SMOYF2OFDJyr66NimBXQGzjx84xJcG0eGk8kCIwEw xyiE/WmB9WT2scFSgAsfaOEE27ozaq9iANNUA/ceUibQgQYpQveBgy4XVXFjEzFo 3BVvPYGGzjebzaXbMwDV6OvSgMwnTsMxjtZGsraxIEOcMdeeMEpn1/Ze4ksWi4c= =R4Zx -----END PGP SIGNATURE----- Merge tag 'spi-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "Quite a lot of cleanup and maintainence work going on this release in various drivers, and also a fix for a nasty locking issue in the core: - A fix for locking issues when external drivers explicitly locked the bus with spi_bus_lock() - we were using the same lock to both control access to the physical bus in multi-threaded I/O operations and exclude multiple callers. Confusion between these two caused us to have scenarios where we were dropping locks. These are fixed by splitting into two separate locks like should have been done originally, making everything much clearer and correct. - Support for DMA in spi_flash_read(). - Support for instantiating spidev on ACPI systems, including some test devices used in Windows validation. - Use of the core DMA mapping functionality in the McSPI driver. - Start of support for ThunderX SPI controllers, involving a very big set of changes to the Cavium driver. - Support for Braswell, Exynos 5433, Kaby Lake, Merrifield, RK3036, RK3228, RK3368 controllers" * tag 'spi-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (64 commits) spi: Split bus and I/O locking spi: octeon: Split driver into Octeon specific and common parts spi: octeon: Move include file from arch/mips to drivers/spi spi: octeon: Put register offsets into a struct spi: octeon: Store system clock freqency in struct octeon_spi spi: octeon: Convert driver to use readq()/writeq() functions spi: pic32-sqi: fixup wait_for_completion_timeout return handling spi: pic32: fixup wait_for_completion_timeout return handling spi: rockchip: limit transfers to (64K - 1) bytes spi: xilinx: Return IRQ_NONE if no interrupts were detected spi: xilinx: Handle errors from platform_get_irq() spi: s3c64xx: restore removed comments spi: s3c64xx: add Exynos5433 compatible for ioclk handling spi: s3c64xx: use error code from clk_prepare_enable() spi: s3c64xx: rename goto labels to meaningful names spi: s3c64xx: document the clocks and the clock-name property spi: s3c64xx: add exynos5433 spi compatible spi: s3c64xx: fix reference leak to master in s3c64xx_spi_remove() spi: spi-sh: Remove deprecated create_singlethread_workqueue spi: spi-topcliff-pch: Remove deprecated create_singlethread_workqueue ...
3263 lines
87 KiB
C
3263 lines
87 KiB
C
/*
|
|
* SPI init/core code
|
|
*
|
|
* Copyright (C) 2005 David Brownell
|
|
* Copyright (C) 2008 Secret Lab Technologies Ltd.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/device.h>
|
|
#include <linux/init.h>
|
|
#include <linux/cache.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/dmaengine.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/clk/clk-conf.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/mod_devicetable.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/pm_domain.h>
|
|
#include <linux/export.h>
|
|
#include <linux/sched/rt.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/kthread.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/acpi.h>
|
|
|
|
#define CREATE_TRACE_POINTS
|
|
#include <trace/events/spi.h>
|
|
|
|
static void spidev_release(struct device *dev)
|
|
{
|
|
struct spi_device *spi = to_spi_device(dev);
|
|
|
|
/* spi masters may cleanup for released devices */
|
|
if (spi->master->cleanup)
|
|
spi->master->cleanup(spi);
|
|
|
|
spi_master_put(spi->master);
|
|
kfree(spi);
|
|
}
|
|
|
|
static ssize_t
|
|
modalias_show(struct device *dev, struct device_attribute *a, char *buf)
|
|
{
|
|
const struct spi_device *spi = to_spi_device(dev);
|
|
int len;
|
|
|
|
len = acpi_device_modalias(dev, buf, PAGE_SIZE - 1);
|
|
if (len != -ENODEV)
|
|
return len;
|
|
|
|
return sprintf(buf, "%s%s\n", SPI_MODULE_PREFIX, spi->modalias);
|
|
}
|
|
static DEVICE_ATTR_RO(modalias);
|
|
|
|
#define SPI_STATISTICS_ATTRS(field, file) \
|
|
static ssize_t spi_master_##field##_show(struct device *dev, \
|
|
struct device_attribute *attr, \
|
|
char *buf) \
|
|
{ \
|
|
struct spi_master *master = container_of(dev, \
|
|
struct spi_master, dev); \
|
|
return spi_statistics_##field##_show(&master->statistics, buf); \
|
|
} \
|
|
static struct device_attribute dev_attr_spi_master_##field = { \
|
|
.attr = { .name = file, .mode = S_IRUGO }, \
|
|
.show = spi_master_##field##_show, \
|
|
}; \
|
|
static ssize_t spi_device_##field##_show(struct device *dev, \
|
|
struct device_attribute *attr, \
|
|
char *buf) \
|
|
{ \
|
|
struct spi_device *spi = to_spi_device(dev); \
|
|
return spi_statistics_##field##_show(&spi->statistics, buf); \
|
|
} \
|
|
static struct device_attribute dev_attr_spi_device_##field = { \
|
|
.attr = { .name = file, .mode = S_IRUGO }, \
|
|
.show = spi_device_##field##_show, \
|
|
}
|
|
|
|
#define SPI_STATISTICS_SHOW_NAME(name, file, field, format_string) \
|
|
static ssize_t spi_statistics_##name##_show(struct spi_statistics *stat, \
|
|
char *buf) \
|
|
{ \
|
|
unsigned long flags; \
|
|
ssize_t len; \
|
|
spin_lock_irqsave(&stat->lock, flags); \
|
|
len = sprintf(buf, format_string, stat->field); \
|
|
spin_unlock_irqrestore(&stat->lock, flags); \
|
|
return len; \
|
|
} \
|
|
SPI_STATISTICS_ATTRS(name, file)
|
|
|
|
#define SPI_STATISTICS_SHOW(field, format_string) \
|
|
SPI_STATISTICS_SHOW_NAME(field, __stringify(field), \
|
|
field, format_string)
|
|
|
|
SPI_STATISTICS_SHOW(messages, "%lu");
|
|
SPI_STATISTICS_SHOW(transfers, "%lu");
|
|
SPI_STATISTICS_SHOW(errors, "%lu");
|
|
SPI_STATISTICS_SHOW(timedout, "%lu");
|
|
|
|
SPI_STATISTICS_SHOW(spi_sync, "%lu");
|
|
SPI_STATISTICS_SHOW(spi_sync_immediate, "%lu");
|
|
SPI_STATISTICS_SHOW(spi_async, "%lu");
|
|
|
|
SPI_STATISTICS_SHOW(bytes, "%llu");
|
|
SPI_STATISTICS_SHOW(bytes_rx, "%llu");
|
|
SPI_STATISTICS_SHOW(bytes_tx, "%llu");
|
|
|
|
#define SPI_STATISTICS_TRANSFER_BYTES_HISTO(index, number) \
|
|
SPI_STATISTICS_SHOW_NAME(transfer_bytes_histo##index, \
|
|
"transfer_bytes_histo_" number, \
|
|
transfer_bytes_histo[index], "%lu")
|
|
SPI_STATISTICS_TRANSFER_BYTES_HISTO(0, "0-1");
|
|
SPI_STATISTICS_TRANSFER_BYTES_HISTO(1, "2-3");
|
|
SPI_STATISTICS_TRANSFER_BYTES_HISTO(2, "4-7");
|
|
SPI_STATISTICS_TRANSFER_BYTES_HISTO(3, "8-15");
|
|
SPI_STATISTICS_TRANSFER_BYTES_HISTO(4, "16-31");
|
|
SPI_STATISTICS_TRANSFER_BYTES_HISTO(5, "32-63");
|
|
SPI_STATISTICS_TRANSFER_BYTES_HISTO(6, "64-127");
|
|
SPI_STATISTICS_TRANSFER_BYTES_HISTO(7, "128-255");
|
|
SPI_STATISTICS_TRANSFER_BYTES_HISTO(8, "256-511");
|
|
SPI_STATISTICS_TRANSFER_BYTES_HISTO(9, "512-1023");
|
|
SPI_STATISTICS_TRANSFER_BYTES_HISTO(10, "1024-2047");
|
|
SPI_STATISTICS_TRANSFER_BYTES_HISTO(11, "2048-4095");
|
|
SPI_STATISTICS_TRANSFER_BYTES_HISTO(12, "4096-8191");
|
|
SPI_STATISTICS_TRANSFER_BYTES_HISTO(13, "8192-16383");
|
|
SPI_STATISTICS_TRANSFER_BYTES_HISTO(14, "16384-32767");
|
|
SPI_STATISTICS_TRANSFER_BYTES_HISTO(15, "32768-65535");
|
|
SPI_STATISTICS_TRANSFER_BYTES_HISTO(16, "65536+");
|
|
|
|
SPI_STATISTICS_SHOW(transfers_split_maxsize, "%lu");
|
|
|
|
static struct attribute *spi_dev_attrs[] = {
|
|
&dev_attr_modalias.attr,
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group spi_dev_group = {
|
|
.attrs = spi_dev_attrs,
|
|
};
|
|
|
|
static struct attribute *spi_device_statistics_attrs[] = {
|
|
&dev_attr_spi_device_messages.attr,
|
|
&dev_attr_spi_device_transfers.attr,
|
|
&dev_attr_spi_device_errors.attr,
|
|
&dev_attr_spi_device_timedout.attr,
|
|
&dev_attr_spi_device_spi_sync.attr,
|
|
&dev_attr_spi_device_spi_sync_immediate.attr,
|
|
&dev_attr_spi_device_spi_async.attr,
|
|
&dev_attr_spi_device_bytes.attr,
|
|
&dev_attr_spi_device_bytes_rx.attr,
|
|
&dev_attr_spi_device_bytes_tx.attr,
|
|
&dev_attr_spi_device_transfer_bytes_histo0.attr,
|
|
&dev_attr_spi_device_transfer_bytes_histo1.attr,
|
|
&dev_attr_spi_device_transfer_bytes_histo2.attr,
|
|
&dev_attr_spi_device_transfer_bytes_histo3.attr,
|
|
&dev_attr_spi_device_transfer_bytes_histo4.attr,
|
|
&dev_attr_spi_device_transfer_bytes_histo5.attr,
|
|
&dev_attr_spi_device_transfer_bytes_histo6.attr,
|
|
&dev_attr_spi_device_transfer_bytes_histo7.attr,
|
|
&dev_attr_spi_device_transfer_bytes_histo8.attr,
|
|
&dev_attr_spi_device_transfer_bytes_histo9.attr,
|
|
&dev_attr_spi_device_transfer_bytes_histo10.attr,
|
|
&dev_attr_spi_device_transfer_bytes_histo11.attr,
|
|
&dev_attr_spi_device_transfer_bytes_histo12.attr,
|
|
&dev_attr_spi_device_transfer_bytes_histo13.attr,
|
|
&dev_attr_spi_device_transfer_bytes_histo14.attr,
|
|
&dev_attr_spi_device_transfer_bytes_histo15.attr,
|
|
&dev_attr_spi_device_transfer_bytes_histo16.attr,
|
|
&dev_attr_spi_device_transfers_split_maxsize.attr,
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group spi_device_statistics_group = {
|
|
.name = "statistics",
|
|
.attrs = spi_device_statistics_attrs,
|
|
};
|
|
|
|
static const struct attribute_group *spi_dev_groups[] = {
|
|
&spi_dev_group,
|
|
&spi_device_statistics_group,
|
|
NULL,
|
|
};
|
|
|
|
static struct attribute *spi_master_statistics_attrs[] = {
|
|
&dev_attr_spi_master_messages.attr,
|
|
&dev_attr_spi_master_transfers.attr,
|
|
&dev_attr_spi_master_errors.attr,
|
|
&dev_attr_spi_master_timedout.attr,
|
|
&dev_attr_spi_master_spi_sync.attr,
|
|
&dev_attr_spi_master_spi_sync_immediate.attr,
|
|
&dev_attr_spi_master_spi_async.attr,
|
|
&dev_attr_spi_master_bytes.attr,
|
|
&dev_attr_spi_master_bytes_rx.attr,
|
|
&dev_attr_spi_master_bytes_tx.attr,
|
|
&dev_attr_spi_master_transfer_bytes_histo0.attr,
|
|
&dev_attr_spi_master_transfer_bytes_histo1.attr,
|
|
&dev_attr_spi_master_transfer_bytes_histo2.attr,
|
|
&dev_attr_spi_master_transfer_bytes_histo3.attr,
|
|
&dev_attr_spi_master_transfer_bytes_histo4.attr,
|
|
&dev_attr_spi_master_transfer_bytes_histo5.attr,
|
|
&dev_attr_spi_master_transfer_bytes_histo6.attr,
|
|
&dev_attr_spi_master_transfer_bytes_histo7.attr,
|
|
&dev_attr_spi_master_transfer_bytes_histo8.attr,
|
|
&dev_attr_spi_master_transfer_bytes_histo9.attr,
|
|
&dev_attr_spi_master_transfer_bytes_histo10.attr,
|
|
&dev_attr_spi_master_transfer_bytes_histo11.attr,
|
|
&dev_attr_spi_master_transfer_bytes_histo12.attr,
|
|
&dev_attr_spi_master_transfer_bytes_histo13.attr,
|
|
&dev_attr_spi_master_transfer_bytes_histo14.attr,
|
|
&dev_attr_spi_master_transfer_bytes_histo15.attr,
|
|
&dev_attr_spi_master_transfer_bytes_histo16.attr,
|
|
&dev_attr_spi_master_transfers_split_maxsize.attr,
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group spi_master_statistics_group = {
|
|
.name = "statistics",
|
|
.attrs = spi_master_statistics_attrs,
|
|
};
|
|
|
|
static const struct attribute_group *spi_master_groups[] = {
|
|
&spi_master_statistics_group,
|
|
NULL,
|
|
};
|
|
|
|
void spi_statistics_add_transfer_stats(struct spi_statistics *stats,
|
|
struct spi_transfer *xfer,
|
|
struct spi_master *master)
|
|
{
|
|
unsigned long flags;
|
|
int l2len = min(fls(xfer->len), SPI_STATISTICS_HISTO_SIZE) - 1;
|
|
|
|
if (l2len < 0)
|
|
l2len = 0;
|
|
|
|
spin_lock_irqsave(&stats->lock, flags);
|
|
|
|
stats->transfers++;
|
|
stats->transfer_bytes_histo[l2len]++;
|
|
|
|
stats->bytes += xfer->len;
|
|
if ((xfer->tx_buf) &&
|
|
(xfer->tx_buf != master->dummy_tx))
|
|
stats->bytes_tx += xfer->len;
|
|
if ((xfer->rx_buf) &&
|
|
(xfer->rx_buf != master->dummy_rx))
|
|
stats->bytes_rx += xfer->len;
|
|
|
|
spin_unlock_irqrestore(&stats->lock, flags);
|
|
}
|
|
EXPORT_SYMBOL_GPL(spi_statistics_add_transfer_stats);
|
|
|
|
/* modalias support makes "modprobe $MODALIAS" new-style hotplug work,
|
|
* and the sysfs version makes coldplug work too.
|
|
*/
|
|
|
|
static const struct spi_device_id *spi_match_id(const struct spi_device_id *id,
|
|
const struct spi_device *sdev)
|
|
{
|
|
while (id->name[0]) {
|
|
if (!strcmp(sdev->modalias, id->name))
|
|
return id;
|
|
id++;
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
const struct spi_device_id *spi_get_device_id(const struct spi_device *sdev)
|
|
{
|
|
const struct spi_driver *sdrv = to_spi_driver(sdev->dev.driver);
|
|
|
|
return spi_match_id(sdrv->id_table, sdev);
|
|
}
|
|
EXPORT_SYMBOL_GPL(spi_get_device_id);
|
|
|
|
static int spi_match_device(struct device *dev, struct device_driver *drv)
|
|
{
|
|
const struct spi_device *spi = to_spi_device(dev);
|
|
const struct spi_driver *sdrv = to_spi_driver(drv);
|
|
|
|
/* Attempt an OF style match */
|
|
if (of_driver_match_device(dev, drv))
|
|
return 1;
|
|
|
|
/* Then try ACPI */
|
|
if (acpi_driver_match_device(dev, drv))
|
|
return 1;
|
|
|
|
if (sdrv->id_table)
|
|
return !!spi_match_id(sdrv->id_table, spi);
|
|
|
|
return strcmp(spi->modalias, drv->name) == 0;
|
|
}
|
|
|
|
static int spi_uevent(struct device *dev, struct kobj_uevent_env *env)
|
|
{
|
|
const struct spi_device *spi = to_spi_device(dev);
|
|
int rc;
|
|
|
|
rc = acpi_device_uevent_modalias(dev, env);
|
|
if (rc != -ENODEV)
|
|
return rc;
|
|
|
|
add_uevent_var(env, "MODALIAS=%s%s", SPI_MODULE_PREFIX, spi->modalias);
|
|
return 0;
|
|
}
|
|
|
|
struct bus_type spi_bus_type = {
|
|
.name = "spi",
|
|
.dev_groups = spi_dev_groups,
|
|
.match = spi_match_device,
|
|
.uevent = spi_uevent,
|
|
};
|
|
EXPORT_SYMBOL_GPL(spi_bus_type);
|
|
|
|
|
|
static int spi_drv_probe(struct device *dev)
|
|
{
|
|
const struct spi_driver *sdrv = to_spi_driver(dev->driver);
|
|
struct spi_device *spi = to_spi_device(dev);
|
|
int ret;
|
|
|
|
ret = of_clk_set_defaults(dev->of_node, false);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (dev->of_node) {
|
|
spi->irq = of_irq_get(dev->of_node, 0);
|
|
if (spi->irq == -EPROBE_DEFER)
|
|
return -EPROBE_DEFER;
|
|
if (spi->irq < 0)
|
|
spi->irq = 0;
|
|
}
|
|
|
|
ret = dev_pm_domain_attach(dev, true);
|
|
if (ret != -EPROBE_DEFER) {
|
|
ret = sdrv->probe(spi);
|
|
if (ret)
|
|
dev_pm_domain_detach(dev, true);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int spi_drv_remove(struct device *dev)
|
|
{
|
|
const struct spi_driver *sdrv = to_spi_driver(dev->driver);
|
|
int ret;
|
|
|
|
ret = sdrv->remove(to_spi_device(dev));
|
|
dev_pm_domain_detach(dev, true);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void spi_drv_shutdown(struct device *dev)
|
|
{
|
|
const struct spi_driver *sdrv = to_spi_driver(dev->driver);
|
|
|
|
sdrv->shutdown(to_spi_device(dev));
|
|
}
|
|
|
|
/**
|
|
* __spi_register_driver - register a SPI driver
|
|
* @owner: owner module of the driver to register
|
|
* @sdrv: the driver to register
|
|
* Context: can sleep
|
|
*
|
|
* Return: zero on success, else a negative error code.
|
|
*/
|
|
int __spi_register_driver(struct module *owner, struct spi_driver *sdrv)
|
|
{
|
|
sdrv->driver.owner = owner;
|
|
sdrv->driver.bus = &spi_bus_type;
|
|
if (sdrv->probe)
|
|
sdrv->driver.probe = spi_drv_probe;
|
|
if (sdrv->remove)
|
|
sdrv->driver.remove = spi_drv_remove;
|
|
if (sdrv->shutdown)
|
|
sdrv->driver.shutdown = spi_drv_shutdown;
|
|
return driver_register(&sdrv->driver);
|
|
}
|
|
EXPORT_SYMBOL_GPL(__spi_register_driver);
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* SPI devices should normally not be created by SPI device drivers; that
|
|
* would make them board-specific. Similarly with SPI master drivers.
|
|
* Device registration normally goes into like arch/.../mach.../board-YYY.c
|
|
* with other readonly (flashable) information about mainboard devices.
|
|
*/
|
|
|
|
struct boardinfo {
|
|
struct list_head list;
|
|
struct spi_board_info board_info;
|
|
};
|
|
|
|
static LIST_HEAD(board_list);
|
|
static LIST_HEAD(spi_master_list);
|
|
|
|
/*
|
|
* Used to protect add/del opertion for board_info list and
|
|
* spi_master list, and their matching process
|
|
*/
|
|
static DEFINE_MUTEX(board_lock);
|
|
|
|
/**
|
|
* spi_alloc_device - Allocate a new SPI device
|
|
* @master: Controller to which device is connected
|
|
* Context: can sleep
|
|
*
|
|
* Allows a driver to allocate and initialize a spi_device without
|
|
* registering it immediately. This allows a driver to directly
|
|
* fill the spi_device with device parameters before calling
|
|
* spi_add_device() on it.
|
|
*
|
|
* Caller is responsible to call spi_add_device() on the returned
|
|
* spi_device structure to add it to the SPI master. If the caller
|
|
* needs to discard the spi_device without adding it, then it should
|
|
* call spi_dev_put() on it.
|
|
*
|
|
* Return: a pointer to the new device, or NULL.
|
|
*/
|
|
struct spi_device *spi_alloc_device(struct spi_master *master)
|
|
{
|
|
struct spi_device *spi;
|
|
|
|
if (!spi_master_get(master))
|
|
return NULL;
|
|
|
|
spi = kzalloc(sizeof(*spi), GFP_KERNEL);
|
|
if (!spi) {
|
|
spi_master_put(master);
|
|
return NULL;
|
|
}
|
|
|
|
spi->master = master;
|
|
spi->dev.parent = &master->dev;
|
|
spi->dev.bus = &spi_bus_type;
|
|
spi->dev.release = spidev_release;
|
|
spi->cs_gpio = -ENOENT;
|
|
|
|
spin_lock_init(&spi->statistics.lock);
|
|
|
|
device_initialize(&spi->dev);
|
|
return spi;
|
|
}
|
|
EXPORT_SYMBOL_GPL(spi_alloc_device);
|
|
|
|
static void spi_dev_set_name(struct spi_device *spi)
|
|
{
|
|
struct acpi_device *adev = ACPI_COMPANION(&spi->dev);
|
|
|
|
if (adev) {
|
|
dev_set_name(&spi->dev, "spi-%s", acpi_dev_name(adev));
|
|
return;
|
|
}
|
|
|
|
dev_set_name(&spi->dev, "%s.%u", dev_name(&spi->master->dev),
|
|
spi->chip_select);
|
|
}
|
|
|
|
static int spi_dev_check(struct device *dev, void *data)
|
|
{
|
|
struct spi_device *spi = to_spi_device(dev);
|
|
struct spi_device *new_spi = data;
|
|
|
|
if (spi->master == new_spi->master &&
|
|
spi->chip_select == new_spi->chip_select)
|
|
return -EBUSY;
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* spi_add_device - Add spi_device allocated with spi_alloc_device
|
|
* @spi: spi_device to register
|
|
*
|
|
* Companion function to spi_alloc_device. Devices allocated with
|
|
* spi_alloc_device can be added onto the spi bus with this function.
|
|
*
|
|
* Return: 0 on success; negative errno on failure
|
|
*/
|
|
int spi_add_device(struct spi_device *spi)
|
|
{
|
|
static DEFINE_MUTEX(spi_add_lock);
|
|
struct spi_master *master = spi->master;
|
|
struct device *dev = master->dev.parent;
|
|
int status;
|
|
|
|
/* Chipselects are numbered 0..max; validate. */
|
|
if (spi->chip_select >= master->num_chipselect) {
|
|
dev_err(dev, "cs%d >= max %d\n",
|
|
spi->chip_select,
|
|
master->num_chipselect);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Set the bus ID string */
|
|
spi_dev_set_name(spi);
|
|
|
|
/* We need to make sure there's no other device with this
|
|
* chipselect **BEFORE** we call setup(), else we'll trash
|
|
* its configuration. Lock against concurrent add() calls.
|
|
*/
|
|
mutex_lock(&spi_add_lock);
|
|
|
|
status = bus_for_each_dev(&spi_bus_type, NULL, spi, spi_dev_check);
|
|
if (status) {
|
|
dev_err(dev, "chipselect %d already in use\n",
|
|
spi->chip_select);
|
|
goto done;
|
|
}
|
|
|
|
if (master->cs_gpios)
|
|
spi->cs_gpio = master->cs_gpios[spi->chip_select];
|
|
|
|
/* Drivers may modify this initial i/o setup, but will
|
|
* normally rely on the device being setup. Devices
|
|
* using SPI_CS_HIGH can't coexist well otherwise...
|
|
*/
|
|
status = spi_setup(spi);
|
|
if (status < 0) {
|
|
dev_err(dev, "can't setup %s, status %d\n",
|
|
dev_name(&spi->dev), status);
|
|
goto done;
|
|
}
|
|
|
|
/* Device may be bound to an active driver when this returns */
|
|
status = device_add(&spi->dev);
|
|
if (status < 0)
|
|
dev_err(dev, "can't add %s, status %d\n",
|
|
dev_name(&spi->dev), status);
|
|
else
|
|
dev_dbg(dev, "registered child %s\n", dev_name(&spi->dev));
|
|
|
|
done:
|
|
mutex_unlock(&spi_add_lock);
|
|
return status;
|
|
}
|
|
EXPORT_SYMBOL_GPL(spi_add_device);
|
|
|
|
/**
|
|
* spi_new_device - instantiate one new SPI device
|
|
* @master: Controller to which device is connected
|
|
* @chip: Describes the SPI device
|
|
* Context: can sleep
|
|
*
|
|
* On typical mainboards, this is purely internal; and it's not needed
|
|
* after board init creates the hard-wired devices. Some development
|
|
* platforms may not be able to use spi_register_board_info though, and
|
|
* this is exported so that for example a USB or parport based adapter
|
|
* driver could add devices (which it would learn about out-of-band).
|
|
*
|
|
* Return: the new device, or NULL.
|
|
*/
|
|
struct spi_device *spi_new_device(struct spi_master *master,
|
|
struct spi_board_info *chip)
|
|
{
|
|
struct spi_device *proxy;
|
|
int status;
|
|
|
|
/* NOTE: caller did any chip->bus_num checks necessary.
|
|
*
|
|
* Also, unless we change the return value convention to use
|
|
* error-or-pointer (not NULL-or-pointer), troubleshootability
|
|
* suggests syslogged diagnostics are best here (ugh).
|
|
*/
|
|
|
|
proxy = spi_alloc_device(master);
|
|
if (!proxy)
|
|
return NULL;
|
|
|
|
WARN_ON(strlen(chip->modalias) >= sizeof(proxy->modalias));
|
|
|
|
proxy->chip_select = chip->chip_select;
|
|
proxy->max_speed_hz = chip->max_speed_hz;
|
|
proxy->mode = chip->mode;
|
|
proxy->irq = chip->irq;
|
|
strlcpy(proxy->modalias, chip->modalias, sizeof(proxy->modalias));
|
|
proxy->dev.platform_data = (void *) chip->platform_data;
|
|
proxy->controller_data = chip->controller_data;
|
|
proxy->controller_state = NULL;
|
|
|
|
status = spi_add_device(proxy);
|
|
if (status < 0) {
|
|
spi_dev_put(proxy);
|
|
return NULL;
|
|
}
|
|
|
|
return proxy;
|
|
}
|
|
EXPORT_SYMBOL_GPL(spi_new_device);
|
|
|
|
/**
|
|
* spi_unregister_device - unregister a single SPI device
|
|
* @spi: spi_device to unregister
|
|
*
|
|
* Start making the passed SPI device vanish. Normally this would be handled
|
|
* by spi_unregister_master().
|
|
*/
|
|
void spi_unregister_device(struct spi_device *spi)
|
|
{
|
|
if (!spi)
|
|
return;
|
|
|
|
if (spi->dev.of_node)
|
|
of_node_clear_flag(spi->dev.of_node, OF_POPULATED);
|
|
if (ACPI_COMPANION(&spi->dev))
|
|
acpi_device_clear_enumerated(ACPI_COMPANION(&spi->dev));
|
|
device_unregister(&spi->dev);
|
|
}
|
|
EXPORT_SYMBOL_GPL(spi_unregister_device);
|
|
|
|
static void spi_match_master_to_boardinfo(struct spi_master *master,
|
|
struct spi_board_info *bi)
|
|
{
|
|
struct spi_device *dev;
|
|
|
|
if (master->bus_num != bi->bus_num)
|
|
return;
|
|
|
|
dev = spi_new_device(master, bi);
|
|
if (!dev)
|
|
dev_err(master->dev.parent, "can't create new device for %s\n",
|
|
bi->modalias);
|
|
}
|
|
|
|
/**
|
|
* spi_register_board_info - register SPI devices for a given board
|
|
* @info: array of chip descriptors
|
|
* @n: how many descriptors are provided
|
|
* Context: can sleep
|
|
*
|
|
* Board-specific early init code calls this (probably during arch_initcall)
|
|
* with segments of the SPI device table. Any device nodes are created later,
|
|
* after the relevant parent SPI controller (bus_num) is defined. We keep
|
|
* this table of devices forever, so that reloading a controller driver will
|
|
* not make Linux forget about these hard-wired devices.
|
|
*
|
|
* Other code can also call this, e.g. a particular add-on board might provide
|
|
* SPI devices through its expansion connector, so code initializing that board
|
|
* would naturally declare its SPI devices.
|
|
*
|
|
* The board info passed can safely be __initdata ... but be careful of
|
|
* any embedded pointers (platform_data, etc), they're copied as-is.
|
|
*
|
|
* Return: zero on success, else a negative error code.
|
|
*/
|
|
int spi_register_board_info(struct spi_board_info const *info, unsigned n)
|
|
{
|
|
struct boardinfo *bi;
|
|
int i;
|
|
|
|
if (!n)
|
|
return -EINVAL;
|
|
|
|
bi = kzalloc(n * sizeof(*bi), GFP_KERNEL);
|
|
if (!bi)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < n; i++, bi++, info++) {
|
|
struct spi_master *master;
|
|
|
|
memcpy(&bi->board_info, info, sizeof(*info));
|
|
mutex_lock(&board_lock);
|
|
list_add_tail(&bi->list, &board_list);
|
|
list_for_each_entry(master, &spi_master_list, list)
|
|
spi_match_master_to_boardinfo(master, &bi->board_info);
|
|
mutex_unlock(&board_lock);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static void spi_set_cs(struct spi_device *spi, bool enable)
|
|
{
|
|
if (spi->mode & SPI_CS_HIGH)
|
|
enable = !enable;
|
|
|
|
if (gpio_is_valid(spi->cs_gpio))
|
|
gpio_set_value(spi->cs_gpio, !enable);
|
|
else if (spi->master->set_cs)
|
|
spi->master->set_cs(spi, !enable);
|
|
}
|
|
|
|
#ifdef CONFIG_HAS_DMA
|
|
static int spi_map_buf(struct spi_master *master, struct device *dev,
|
|
struct sg_table *sgt, void *buf, size_t len,
|
|
enum dma_data_direction dir)
|
|
{
|
|
const bool vmalloced_buf = is_vmalloc_addr(buf);
|
|
unsigned int max_seg_size = dma_get_max_seg_size(dev);
|
|
int desc_len;
|
|
int sgs;
|
|
struct page *vm_page;
|
|
void *sg_buf;
|
|
size_t min;
|
|
int i, ret;
|
|
|
|
if (vmalloced_buf) {
|
|
desc_len = min_t(int, max_seg_size, PAGE_SIZE);
|
|
sgs = DIV_ROUND_UP(len + offset_in_page(buf), desc_len);
|
|
} else if (virt_addr_valid(buf)) {
|
|
desc_len = min_t(int, max_seg_size, master->max_dma_len);
|
|
sgs = DIV_ROUND_UP(len, desc_len);
|
|
} else {
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = sg_alloc_table(sgt, sgs, GFP_KERNEL);
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
for (i = 0; i < sgs; i++) {
|
|
|
|
if (vmalloced_buf) {
|
|
min = min_t(size_t,
|
|
len, desc_len - offset_in_page(buf));
|
|
vm_page = vmalloc_to_page(buf);
|
|
if (!vm_page) {
|
|
sg_free_table(sgt);
|
|
return -ENOMEM;
|
|
}
|
|
sg_set_page(&sgt->sgl[i], vm_page,
|
|
min, offset_in_page(buf));
|
|
} else {
|
|
min = min_t(size_t, len, desc_len);
|
|
sg_buf = buf;
|
|
sg_set_buf(&sgt->sgl[i], sg_buf, min);
|
|
}
|
|
|
|
buf += min;
|
|
len -= min;
|
|
}
|
|
|
|
ret = dma_map_sg(dev, sgt->sgl, sgt->nents, dir);
|
|
if (!ret)
|
|
ret = -ENOMEM;
|
|
if (ret < 0) {
|
|
sg_free_table(sgt);
|
|
return ret;
|
|
}
|
|
|
|
sgt->nents = ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void spi_unmap_buf(struct spi_master *master, struct device *dev,
|
|
struct sg_table *sgt, enum dma_data_direction dir)
|
|
{
|
|
if (sgt->orig_nents) {
|
|
dma_unmap_sg(dev, sgt->sgl, sgt->orig_nents, dir);
|
|
sg_free_table(sgt);
|
|
}
|
|
}
|
|
|
|
static int __spi_map_msg(struct spi_master *master, struct spi_message *msg)
|
|
{
|
|
struct device *tx_dev, *rx_dev;
|
|
struct spi_transfer *xfer;
|
|
int ret;
|
|
|
|
if (!master->can_dma)
|
|
return 0;
|
|
|
|
if (master->dma_tx)
|
|
tx_dev = master->dma_tx->device->dev;
|
|
else
|
|
tx_dev = &master->dev;
|
|
|
|
if (master->dma_rx)
|
|
rx_dev = master->dma_rx->device->dev;
|
|
else
|
|
rx_dev = &master->dev;
|
|
|
|
list_for_each_entry(xfer, &msg->transfers, transfer_list) {
|
|
if (!master->can_dma(master, msg->spi, xfer))
|
|
continue;
|
|
|
|
if (xfer->tx_buf != NULL) {
|
|
ret = spi_map_buf(master, tx_dev, &xfer->tx_sg,
|
|
(void *)xfer->tx_buf, xfer->len,
|
|
DMA_TO_DEVICE);
|
|
if (ret != 0)
|
|
return ret;
|
|
}
|
|
|
|
if (xfer->rx_buf != NULL) {
|
|
ret = spi_map_buf(master, rx_dev, &xfer->rx_sg,
|
|
xfer->rx_buf, xfer->len,
|
|
DMA_FROM_DEVICE);
|
|
if (ret != 0) {
|
|
spi_unmap_buf(master, tx_dev, &xfer->tx_sg,
|
|
DMA_TO_DEVICE);
|
|
return ret;
|
|
}
|
|
}
|
|
}
|
|
|
|
master->cur_msg_mapped = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __spi_unmap_msg(struct spi_master *master, struct spi_message *msg)
|
|
{
|
|
struct spi_transfer *xfer;
|
|
struct device *tx_dev, *rx_dev;
|
|
|
|
if (!master->cur_msg_mapped || !master->can_dma)
|
|
return 0;
|
|
|
|
if (master->dma_tx)
|
|
tx_dev = master->dma_tx->device->dev;
|
|
else
|
|
tx_dev = &master->dev;
|
|
|
|
if (master->dma_rx)
|
|
rx_dev = master->dma_rx->device->dev;
|
|
else
|
|
rx_dev = &master->dev;
|
|
|
|
list_for_each_entry(xfer, &msg->transfers, transfer_list) {
|
|
if (!master->can_dma(master, msg->spi, xfer))
|
|
continue;
|
|
|
|
spi_unmap_buf(master, rx_dev, &xfer->rx_sg, DMA_FROM_DEVICE);
|
|
spi_unmap_buf(master, tx_dev, &xfer->tx_sg, DMA_TO_DEVICE);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#else /* !CONFIG_HAS_DMA */
|
|
static inline int spi_map_buf(struct spi_master *master,
|
|
struct device *dev, struct sg_table *sgt,
|
|
void *buf, size_t len,
|
|
enum dma_data_direction dir)
|
|
{
|
|
return -EINVAL;
|
|
}
|
|
|
|
static inline void spi_unmap_buf(struct spi_master *master,
|
|
struct device *dev, struct sg_table *sgt,
|
|
enum dma_data_direction dir)
|
|
{
|
|
}
|
|
|
|
static inline int __spi_map_msg(struct spi_master *master,
|
|
struct spi_message *msg)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int __spi_unmap_msg(struct spi_master *master,
|
|
struct spi_message *msg)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif /* !CONFIG_HAS_DMA */
|
|
|
|
static inline int spi_unmap_msg(struct spi_master *master,
|
|
struct spi_message *msg)
|
|
{
|
|
struct spi_transfer *xfer;
|
|
|
|
list_for_each_entry(xfer, &msg->transfers, transfer_list) {
|
|
/*
|
|
* Restore the original value of tx_buf or rx_buf if they are
|
|
* NULL.
|
|
*/
|
|
if (xfer->tx_buf == master->dummy_tx)
|
|
xfer->tx_buf = NULL;
|
|
if (xfer->rx_buf == master->dummy_rx)
|
|
xfer->rx_buf = NULL;
|
|
}
|
|
|
|
return __spi_unmap_msg(master, msg);
|
|
}
|
|
|
|
static int spi_map_msg(struct spi_master *master, struct spi_message *msg)
|
|
{
|
|
struct spi_transfer *xfer;
|
|
void *tmp;
|
|
unsigned int max_tx, max_rx;
|
|
|
|
if (master->flags & (SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX)) {
|
|
max_tx = 0;
|
|
max_rx = 0;
|
|
|
|
list_for_each_entry(xfer, &msg->transfers, transfer_list) {
|
|
if ((master->flags & SPI_MASTER_MUST_TX) &&
|
|
!xfer->tx_buf)
|
|
max_tx = max(xfer->len, max_tx);
|
|
if ((master->flags & SPI_MASTER_MUST_RX) &&
|
|
!xfer->rx_buf)
|
|
max_rx = max(xfer->len, max_rx);
|
|
}
|
|
|
|
if (max_tx) {
|
|
tmp = krealloc(master->dummy_tx, max_tx,
|
|
GFP_KERNEL | GFP_DMA);
|
|
if (!tmp)
|
|
return -ENOMEM;
|
|
master->dummy_tx = tmp;
|
|
memset(tmp, 0, max_tx);
|
|
}
|
|
|
|
if (max_rx) {
|
|
tmp = krealloc(master->dummy_rx, max_rx,
|
|
GFP_KERNEL | GFP_DMA);
|
|
if (!tmp)
|
|
return -ENOMEM;
|
|
master->dummy_rx = tmp;
|
|
}
|
|
|
|
if (max_tx || max_rx) {
|
|
list_for_each_entry(xfer, &msg->transfers,
|
|
transfer_list) {
|
|
if (!xfer->tx_buf)
|
|
xfer->tx_buf = master->dummy_tx;
|
|
if (!xfer->rx_buf)
|
|
xfer->rx_buf = master->dummy_rx;
|
|
}
|
|
}
|
|
}
|
|
|
|
return __spi_map_msg(master, msg);
|
|
}
|
|
|
|
/*
|
|
* spi_transfer_one_message - Default implementation of transfer_one_message()
|
|
*
|
|
* This is a standard implementation of transfer_one_message() for
|
|
* drivers which implement a transfer_one() operation. It provides
|
|
* standard handling of delays and chip select management.
|
|
*/
|
|
static int spi_transfer_one_message(struct spi_master *master,
|
|
struct spi_message *msg)
|
|
{
|
|
struct spi_transfer *xfer;
|
|
bool keep_cs = false;
|
|
int ret = 0;
|
|
unsigned long ms = 1;
|
|
struct spi_statistics *statm = &master->statistics;
|
|
struct spi_statistics *stats = &msg->spi->statistics;
|
|
|
|
spi_set_cs(msg->spi, true);
|
|
|
|
SPI_STATISTICS_INCREMENT_FIELD(statm, messages);
|
|
SPI_STATISTICS_INCREMENT_FIELD(stats, messages);
|
|
|
|
list_for_each_entry(xfer, &msg->transfers, transfer_list) {
|
|
trace_spi_transfer_start(msg, xfer);
|
|
|
|
spi_statistics_add_transfer_stats(statm, xfer, master);
|
|
spi_statistics_add_transfer_stats(stats, xfer, master);
|
|
|
|
if (xfer->tx_buf || xfer->rx_buf) {
|
|
reinit_completion(&master->xfer_completion);
|
|
|
|
ret = master->transfer_one(master, msg->spi, xfer);
|
|
if (ret < 0) {
|
|
SPI_STATISTICS_INCREMENT_FIELD(statm,
|
|
errors);
|
|
SPI_STATISTICS_INCREMENT_FIELD(stats,
|
|
errors);
|
|
dev_err(&msg->spi->dev,
|
|
"SPI transfer failed: %d\n", ret);
|
|
goto out;
|
|
}
|
|
|
|
if (ret > 0) {
|
|
ret = 0;
|
|
ms = xfer->len * 8 * 1000 / xfer->speed_hz;
|
|
ms += ms + 100; /* some tolerance */
|
|
|
|
ms = wait_for_completion_timeout(&master->xfer_completion,
|
|
msecs_to_jiffies(ms));
|
|
}
|
|
|
|
if (ms == 0) {
|
|
SPI_STATISTICS_INCREMENT_FIELD(statm,
|
|
timedout);
|
|
SPI_STATISTICS_INCREMENT_FIELD(stats,
|
|
timedout);
|
|
dev_err(&msg->spi->dev,
|
|
"SPI transfer timed out\n");
|
|
msg->status = -ETIMEDOUT;
|
|
}
|
|
} else {
|
|
if (xfer->len)
|
|
dev_err(&msg->spi->dev,
|
|
"Bufferless transfer has length %u\n",
|
|
xfer->len);
|
|
}
|
|
|
|
trace_spi_transfer_stop(msg, xfer);
|
|
|
|
if (msg->status != -EINPROGRESS)
|
|
goto out;
|
|
|
|
if (xfer->delay_usecs)
|
|
udelay(xfer->delay_usecs);
|
|
|
|
if (xfer->cs_change) {
|
|
if (list_is_last(&xfer->transfer_list,
|
|
&msg->transfers)) {
|
|
keep_cs = true;
|
|
} else {
|
|
spi_set_cs(msg->spi, false);
|
|
udelay(10);
|
|
spi_set_cs(msg->spi, true);
|
|
}
|
|
}
|
|
|
|
msg->actual_length += xfer->len;
|
|
}
|
|
|
|
out:
|
|
if (ret != 0 || !keep_cs)
|
|
spi_set_cs(msg->spi, false);
|
|
|
|
if (msg->status == -EINPROGRESS)
|
|
msg->status = ret;
|
|
|
|
if (msg->status && master->handle_err)
|
|
master->handle_err(master, msg);
|
|
|
|
spi_res_release(master, msg);
|
|
|
|
spi_finalize_current_message(master);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* spi_finalize_current_transfer - report completion of a transfer
|
|
* @master: the master reporting completion
|
|
*
|
|
* Called by SPI drivers using the core transfer_one_message()
|
|
* implementation to notify it that the current interrupt driven
|
|
* transfer has finished and the next one may be scheduled.
|
|
*/
|
|
void spi_finalize_current_transfer(struct spi_master *master)
|
|
{
|
|
complete(&master->xfer_completion);
|
|
}
|
|
EXPORT_SYMBOL_GPL(spi_finalize_current_transfer);
|
|
|
|
/**
|
|
* __spi_pump_messages - function which processes spi message queue
|
|
* @master: master to process queue for
|
|
* @in_kthread: true if we are in the context of the message pump thread
|
|
*
|
|
* This function checks if there is any spi message in the queue that
|
|
* needs processing and if so call out to the driver to initialize hardware
|
|
* and transfer each message.
|
|
*
|
|
* Note that it is called both from the kthread itself and also from
|
|
* inside spi_sync(); the queue extraction handling at the top of the
|
|
* function should deal with this safely.
|
|
*/
|
|
static void __spi_pump_messages(struct spi_master *master, bool in_kthread)
|
|
{
|
|
unsigned long flags;
|
|
bool was_busy = false;
|
|
int ret;
|
|
|
|
/* Lock queue */
|
|
spin_lock_irqsave(&master->queue_lock, flags);
|
|
|
|
/* Make sure we are not already running a message */
|
|
if (master->cur_msg) {
|
|
spin_unlock_irqrestore(&master->queue_lock, flags);
|
|
return;
|
|
}
|
|
|
|
/* If another context is idling the device then defer */
|
|
if (master->idling) {
|
|
queue_kthread_work(&master->kworker, &master->pump_messages);
|
|
spin_unlock_irqrestore(&master->queue_lock, flags);
|
|
return;
|
|
}
|
|
|
|
/* Check if the queue is idle */
|
|
if (list_empty(&master->queue) || !master->running) {
|
|
if (!master->busy) {
|
|
spin_unlock_irqrestore(&master->queue_lock, flags);
|
|
return;
|
|
}
|
|
|
|
/* Only do teardown in the thread */
|
|
if (!in_kthread) {
|
|
queue_kthread_work(&master->kworker,
|
|
&master->pump_messages);
|
|
spin_unlock_irqrestore(&master->queue_lock, flags);
|
|
return;
|
|
}
|
|
|
|
master->busy = false;
|
|
master->idling = true;
|
|
spin_unlock_irqrestore(&master->queue_lock, flags);
|
|
|
|
kfree(master->dummy_rx);
|
|
master->dummy_rx = NULL;
|
|
kfree(master->dummy_tx);
|
|
master->dummy_tx = NULL;
|
|
if (master->unprepare_transfer_hardware &&
|
|
master->unprepare_transfer_hardware(master))
|
|
dev_err(&master->dev,
|
|
"failed to unprepare transfer hardware\n");
|
|
if (master->auto_runtime_pm) {
|
|
pm_runtime_mark_last_busy(master->dev.parent);
|
|
pm_runtime_put_autosuspend(master->dev.parent);
|
|
}
|
|
trace_spi_master_idle(master);
|
|
|
|
spin_lock_irqsave(&master->queue_lock, flags);
|
|
master->idling = false;
|
|
spin_unlock_irqrestore(&master->queue_lock, flags);
|
|
return;
|
|
}
|
|
|
|
/* Extract head of queue */
|
|
master->cur_msg =
|
|
list_first_entry(&master->queue, struct spi_message, queue);
|
|
|
|
list_del_init(&master->cur_msg->queue);
|
|
if (master->busy)
|
|
was_busy = true;
|
|
else
|
|
master->busy = true;
|
|
spin_unlock_irqrestore(&master->queue_lock, flags);
|
|
|
|
mutex_lock(&master->io_mutex);
|
|
|
|
if (!was_busy && master->auto_runtime_pm) {
|
|
ret = pm_runtime_get_sync(master->dev.parent);
|
|
if (ret < 0) {
|
|
dev_err(&master->dev, "Failed to power device: %d\n",
|
|
ret);
|
|
return;
|
|
}
|
|
}
|
|
|
|
if (!was_busy)
|
|
trace_spi_master_busy(master);
|
|
|
|
if (!was_busy && master->prepare_transfer_hardware) {
|
|
ret = master->prepare_transfer_hardware(master);
|
|
if (ret) {
|
|
dev_err(&master->dev,
|
|
"failed to prepare transfer hardware\n");
|
|
|
|
if (master->auto_runtime_pm)
|
|
pm_runtime_put(master->dev.parent);
|
|
return;
|
|
}
|
|
}
|
|
|
|
trace_spi_message_start(master->cur_msg);
|
|
|
|
if (master->prepare_message) {
|
|
ret = master->prepare_message(master, master->cur_msg);
|
|
if (ret) {
|
|
dev_err(&master->dev,
|
|
"failed to prepare message: %d\n", ret);
|
|
master->cur_msg->status = ret;
|
|
spi_finalize_current_message(master);
|
|
goto out;
|
|
}
|
|
master->cur_msg_prepared = true;
|
|
}
|
|
|
|
ret = spi_map_msg(master, master->cur_msg);
|
|
if (ret) {
|
|
master->cur_msg->status = ret;
|
|
spi_finalize_current_message(master);
|
|
goto out;
|
|
}
|
|
|
|
ret = master->transfer_one_message(master, master->cur_msg);
|
|
if (ret) {
|
|
dev_err(&master->dev,
|
|
"failed to transfer one message from queue\n");
|
|
goto out;
|
|
}
|
|
|
|
out:
|
|
mutex_unlock(&master->io_mutex);
|
|
|
|
/* Prod the scheduler in case transfer_one() was busy waiting */
|
|
if (!ret)
|
|
cond_resched();
|
|
}
|
|
|
|
/**
|
|
* spi_pump_messages - kthread work function which processes spi message queue
|
|
* @work: pointer to kthread work struct contained in the master struct
|
|
*/
|
|
static void spi_pump_messages(struct kthread_work *work)
|
|
{
|
|
struct spi_master *master =
|
|
container_of(work, struct spi_master, pump_messages);
|
|
|
|
__spi_pump_messages(master, true);
|
|
}
|
|
|
|
static int spi_init_queue(struct spi_master *master)
|
|
{
|
|
struct sched_param param = { .sched_priority = MAX_RT_PRIO - 1 };
|
|
|
|
master->running = false;
|
|
master->busy = false;
|
|
|
|
init_kthread_worker(&master->kworker);
|
|
master->kworker_task = kthread_run(kthread_worker_fn,
|
|
&master->kworker, "%s",
|
|
dev_name(&master->dev));
|
|
if (IS_ERR(master->kworker_task)) {
|
|
dev_err(&master->dev, "failed to create message pump task\n");
|
|
return PTR_ERR(master->kworker_task);
|
|
}
|
|
init_kthread_work(&master->pump_messages, spi_pump_messages);
|
|
|
|
/*
|
|
* Master config will indicate if this controller should run the
|
|
* message pump with high (realtime) priority to reduce the transfer
|
|
* latency on the bus by minimising the delay between a transfer
|
|
* request and the scheduling of the message pump thread. Without this
|
|
* setting the message pump thread will remain at default priority.
|
|
*/
|
|
if (master->rt) {
|
|
dev_info(&master->dev,
|
|
"will run message pump with realtime priority\n");
|
|
sched_setscheduler(master->kworker_task, SCHED_FIFO, ¶m);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* spi_get_next_queued_message() - called by driver to check for queued
|
|
* messages
|
|
* @master: the master to check for queued messages
|
|
*
|
|
* If there are more messages in the queue, the next message is returned from
|
|
* this call.
|
|
*
|
|
* Return: the next message in the queue, else NULL if the queue is empty.
|
|
*/
|
|
struct spi_message *spi_get_next_queued_message(struct spi_master *master)
|
|
{
|
|
struct spi_message *next;
|
|
unsigned long flags;
|
|
|
|
/* get a pointer to the next message, if any */
|
|
spin_lock_irqsave(&master->queue_lock, flags);
|
|
next = list_first_entry_or_null(&master->queue, struct spi_message,
|
|
queue);
|
|
spin_unlock_irqrestore(&master->queue_lock, flags);
|
|
|
|
return next;
|
|
}
|
|
EXPORT_SYMBOL_GPL(spi_get_next_queued_message);
|
|
|
|
/**
|
|
* spi_finalize_current_message() - the current message is complete
|
|
* @master: the master to return the message to
|
|
*
|
|
* Called by the driver to notify the core that the message in the front of the
|
|
* queue is complete and can be removed from the queue.
|
|
*/
|
|
void spi_finalize_current_message(struct spi_master *master)
|
|
{
|
|
struct spi_message *mesg;
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
spin_lock_irqsave(&master->queue_lock, flags);
|
|
mesg = master->cur_msg;
|
|
spin_unlock_irqrestore(&master->queue_lock, flags);
|
|
|
|
spi_unmap_msg(master, mesg);
|
|
|
|
if (master->cur_msg_prepared && master->unprepare_message) {
|
|
ret = master->unprepare_message(master, mesg);
|
|
if (ret) {
|
|
dev_err(&master->dev,
|
|
"failed to unprepare message: %d\n", ret);
|
|
}
|
|
}
|
|
|
|
spin_lock_irqsave(&master->queue_lock, flags);
|
|
master->cur_msg = NULL;
|
|
master->cur_msg_prepared = false;
|
|
queue_kthread_work(&master->kworker, &master->pump_messages);
|
|
spin_unlock_irqrestore(&master->queue_lock, flags);
|
|
|
|
trace_spi_message_done(mesg);
|
|
|
|
mesg->state = NULL;
|
|
if (mesg->complete)
|
|
mesg->complete(mesg->context);
|
|
}
|
|
EXPORT_SYMBOL_GPL(spi_finalize_current_message);
|
|
|
|
static int spi_start_queue(struct spi_master *master)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&master->queue_lock, flags);
|
|
|
|
if (master->running || master->busy) {
|
|
spin_unlock_irqrestore(&master->queue_lock, flags);
|
|
return -EBUSY;
|
|
}
|
|
|
|
master->running = true;
|
|
master->cur_msg = NULL;
|
|
spin_unlock_irqrestore(&master->queue_lock, flags);
|
|
|
|
queue_kthread_work(&master->kworker, &master->pump_messages);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int spi_stop_queue(struct spi_master *master)
|
|
{
|
|
unsigned long flags;
|
|
unsigned limit = 500;
|
|
int ret = 0;
|
|
|
|
spin_lock_irqsave(&master->queue_lock, flags);
|
|
|
|
/*
|
|
* This is a bit lame, but is optimized for the common execution path.
|
|
* A wait_queue on the master->busy could be used, but then the common
|
|
* execution path (pump_messages) would be required to call wake_up or
|
|
* friends on every SPI message. Do this instead.
|
|
*/
|
|
while ((!list_empty(&master->queue) || master->busy) && limit--) {
|
|
spin_unlock_irqrestore(&master->queue_lock, flags);
|
|
usleep_range(10000, 11000);
|
|
spin_lock_irqsave(&master->queue_lock, flags);
|
|
}
|
|
|
|
if (!list_empty(&master->queue) || master->busy)
|
|
ret = -EBUSY;
|
|
else
|
|
master->running = false;
|
|
|
|
spin_unlock_irqrestore(&master->queue_lock, flags);
|
|
|
|
if (ret) {
|
|
dev_warn(&master->dev,
|
|
"could not stop message queue\n");
|
|
return ret;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int spi_destroy_queue(struct spi_master *master)
|
|
{
|
|
int ret;
|
|
|
|
ret = spi_stop_queue(master);
|
|
|
|
/*
|
|
* flush_kthread_worker will block until all work is done.
|
|
* If the reason that stop_queue timed out is that the work will never
|
|
* finish, then it does no good to call flush/stop thread, so
|
|
* return anyway.
|
|
*/
|
|
if (ret) {
|
|
dev_err(&master->dev, "problem destroying queue\n");
|
|
return ret;
|
|
}
|
|
|
|
flush_kthread_worker(&master->kworker);
|
|
kthread_stop(master->kworker_task);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __spi_queued_transfer(struct spi_device *spi,
|
|
struct spi_message *msg,
|
|
bool need_pump)
|
|
{
|
|
struct spi_master *master = spi->master;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&master->queue_lock, flags);
|
|
|
|
if (!master->running) {
|
|
spin_unlock_irqrestore(&master->queue_lock, flags);
|
|
return -ESHUTDOWN;
|
|
}
|
|
msg->actual_length = 0;
|
|
msg->status = -EINPROGRESS;
|
|
|
|
list_add_tail(&msg->queue, &master->queue);
|
|
if (!master->busy && need_pump)
|
|
queue_kthread_work(&master->kworker, &master->pump_messages);
|
|
|
|
spin_unlock_irqrestore(&master->queue_lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* spi_queued_transfer - transfer function for queued transfers
|
|
* @spi: spi device which is requesting transfer
|
|
* @msg: spi message which is to handled is queued to driver queue
|
|
*
|
|
* Return: zero on success, else a negative error code.
|
|
*/
|
|
static int spi_queued_transfer(struct spi_device *spi, struct spi_message *msg)
|
|
{
|
|
return __spi_queued_transfer(spi, msg, true);
|
|
}
|
|
|
|
static int spi_master_initialize_queue(struct spi_master *master)
|
|
{
|
|
int ret;
|
|
|
|
master->transfer = spi_queued_transfer;
|
|
if (!master->transfer_one_message)
|
|
master->transfer_one_message = spi_transfer_one_message;
|
|
|
|
/* Initialize and start queue */
|
|
ret = spi_init_queue(master);
|
|
if (ret) {
|
|
dev_err(&master->dev, "problem initializing queue\n");
|
|
goto err_init_queue;
|
|
}
|
|
master->queued = true;
|
|
ret = spi_start_queue(master);
|
|
if (ret) {
|
|
dev_err(&master->dev, "problem starting queue\n");
|
|
goto err_start_queue;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_start_queue:
|
|
spi_destroy_queue(master);
|
|
err_init_queue:
|
|
return ret;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
#if defined(CONFIG_OF)
|
|
static struct spi_device *
|
|
of_register_spi_device(struct spi_master *master, struct device_node *nc)
|
|
{
|
|
struct spi_device *spi;
|
|
int rc;
|
|
u32 value;
|
|
|
|
/* Alloc an spi_device */
|
|
spi = spi_alloc_device(master);
|
|
if (!spi) {
|
|
dev_err(&master->dev, "spi_device alloc error for %s\n",
|
|
nc->full_name);
|
|
rc = -ENOMEM;
|
|
goto err_out;
|
|
}
|
|
|
|
/* Select device driver */
|
|
rc = of_modalias_node(nc, spi->modalias,
|
|
sizeof(spi->modalias));
|
|
if (rc < 0) {
|
|
dev_err(&master->dev, "cannot find modalias for %s\n",
|
|
nc->full_name);
|
|
goto err_out;
|
|
}
|
|
|
|
/* Device address */
|
|
rc = of_property_read_u32(nc, "reg", &value);
|
|
if (rc) {
|
|
dev_err(&master->dev, "%s has no valid 'reg' property (%d)\n",
|
|
nc->full_name, rc);
|
|
goto err_out;
|
|
}
|
|
spi->chip_select = value;
|
|
|
|
/* Mode (clock phase/polarity/etc.) */
|
|
if (of_find_property(nc, "spi-cpha", NULL))
|
|
spi->mode |= SPI_CPHA;
|
|
if (of_find_property(nc, "spi-cpol", NULL))
|
|
spi->mode |= SPI_CPOL;
|
|
if (of_find_property(nc, "spi-cs-high", NULL))
|
|
spi->mode |= SPI_CS_HIGH;
|
|
if (of_find_property(nc, "spi-3wire", NULL))
|
|
spi->mode |= SPI_3WIRE;
|
|
if (of_find_property(nc, "spi-lsb-first", NULL))
|
|
spi->mode |= SPI_LSB_FIRST;
|
|
|
|
/* Device DUAL/QUAD mode */
|
|
if (!of_property_read_u32(nc, "spi-tx-bus-width", &value)) {
|
|
switch (value) {
|
|
case 1:
|
|
break;
|
|
case 2:
|
|
spi->mode |= SPI_TX_DUAL;
|
|
break;
|
|
case 4:
|
|
spi->mode |= SPI_TX_QUAD;
|
|
break;
|
|
default:
|
|
dev_warn(&master->dev,
|
|
"spi-tx-bus-width %d not supported\n",
|
|
value);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!of_property_read_u32(nc, "spi-rx-bus-width", &value)) {
|
|
switch (value) {
|
|
case 1:
|
|
break;
|
|
case 2:
|
|
spi->mode |= SPI_RX_DUAL;
|
|
break;
|
|
case 4:
|
|
spi->mode |= SPI_RX_QUAD;
|
|
break;
|
|
default:
|
|
dev_warn(&master->dev,
|
|
"spi-rx-bus-width %d not supported\n",
|
|
value);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Device speed */
|
|
rc = of_property_read_u32(nc, "spi-max-frequency", &value);
|
|
if (rc) {
|
|
dev_err(&master->dev, "%s has no valid 'spi-max-frequency' property (%d)\n",
|
|
nc->full_name, rc);
|
|
goto err_out;
|
|
}
|
|
spi->max_speed_hz = value;
|
|
|
|
/* Store a pointer to the node in the device structure */
|
|
of_node_get(nc);
|
|
spi->dev.of_node = nc;
|
|
|
|
/* Register the new device */
|
|
rc = spi_add_device(spi);
|
|
if (rc) {
|
|
dev_err(&master->dev, "spi_device register error %s\n",
|
|
nc->full_name);
|
|
goto err_out;
|
|
}
|
|
|
|
return spi;
|
|
|
|
err_out:
|
|
spi_dev_put(spi);
|
|
return ERR_PTR(rc);
|
|
}
|
|
|
|
/**
|
|
* of_register_spi_devices() - Register child devices onto the SPI bus
|
|
* @master: Pointer to spi_master device
|
|
*
|
|
* Registers an spi_device for each child node of master node which has a 'reg'
|
|
* property.
|
|
*/
|
|
static void of_register_spi_devices(struct spi_master *master)
|
|
{
|
|
struct spi_device *spi;
|
|
struct device_node *nc;
|
|
|
|
if (!master->dev.of_node)
|
|
return;
|
|
|
|
for_each_available_child_of_node(master->dev.of_node, nc) {
|
|
if (of_node_test_and_set_flag(nc, OF_POPULATED))
|
|
continue;
|
|
spi = of_register_spi_device(master, nc);
|
|
if (IS_ERR(spi))
|
|
dev_warn(&master->dev, "Failed to create SPI device for %s\n",
|
|
nc->full_name);
|
|
}
|
|
}
|
|
#else
|
|
static void of_register_spi_devices(struct spi_master *master) { }
|
|
#endif
|
|
|
|
#ifdef CONFIG_ACPI
|
|
static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
|
|
{
|
|
struct spi_device *spi = data;
|
|
struct spi_master *master = spi->master;
|
|
|
|
if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) {
|
|
struct acpi_resource_spi_serialbus *sb;
|
|
|
|
sb = &ares->data.spi_serial_bus;
|
|
if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_SPI) {
|
|
/*
|
|
* ACPI DeviceSelection numbering is handled by the
|
|
* host controller driver in Windows and can vary
|
|
* from driver to driver. In Linux we always expect
|
|
* 0 .. max - 1 so we need to ask the driver to
|
|
* translate between the two schemes.
|
|
*/
|
|
if (master->fw_translate_cs) {
|
|
int cs = master->fw_translate_cs(master,
|
|
sb->device_selection);
|
|
if (cs < 0)
|
|
return cs;
|
|
spi->chip_select = cs;
|
|
} else {
|
|
spi->chip_select = sb->device_selection;
|
|
}
|
|
|
|
spi->max_speed_hz = sb->connection_speed;
|
|
|
|
if (sb->clock_phase == ACPI_SPI_SECOND_PHASE)
|
|
spi->mode |= SPI_CPHA;
|
|
if (sb->clock_polarity == ACPI_SPI_START_HIGH)
|
|
spi->mode |= SPI_CPOL;
|
|
if (sb->device_polarity == ACPI_SPI_ACTIVE_HIGH)
|
|
spi->mode |= SPI_CS_HIGH;
|
|
}
|
|
} else if (spi->irq < 0) {
|
|
struct resource r;
|
|
|
|
if (acpi_dev_resource_interrupt(ares, 0, &r))
|
|
spi->irq = r.start;
|
|
}
|
|
|
|
/* Always tell the ACPI core to skip this resource */
|
|
return 1;
|
|
}
|
|
|
|
static acpi_status acpi_register_spi_device(struct spi_master *master,
|
|
struct acpi_device *adev)
|
|
{
|
|
struct list_head resource_list;
|
|
struct spi_device *spi;
|
|
int ret;
|
|
|
|
if (acpi_bus_get_status(adev) || !adev->status.present ||
|
|
acpi_device_enumerated(adev))
|
|
return AE_OK;
|
|
|
|
spi = spi_alloc_device(master);
|
|
if (!spi) {
|
|
dev_err(&master->dev, "failed to allocate SPI device for %s\n",
|
|
dev_name(&adev->dev));
|
|
return AE_NO_MEMORY;
|
|
}
|
|
|
|
ACPI_COMPANION_SET(&spi->dev, adev);
|
|
spi->irq = -1;
|
|
|
|
INIT_LIST_HEAD(&resource_list);
|
|
ret = acpi_dev_get_resources(adev, &resource_list,
|
|
acpi_spi_add_resource, spi);
|
|
acpi_dev_free_resource_list(&resource_list);
|
|
|
|
if (ret < 0 || !spi->max_speed_hz) {
|
|
spi_dev_put(spi);
|
|
return AE_OK;
|
|
}
|
|
|
|
if (spi->irq < 0)
|
|
spi->irq = acpi_dev_gpio_irq_get(adev, 0);
|
|
|
|
acpi_device_set_enumerated(adev);
|
|
|
|
adev->power.flags.ignore_parent = true;
|
|
strlcpy(spi->modalias, acpi_device_hid(adev), sizeof(spi->modalias));
|
|
if (spi_add_device(spi)) {
|
|
adev->power.flags.ignore_parent = false;
|
|
dev_err(&master->dev, "failed to add SPI device %s from ACPI\n",
|
|
dev_name(&adev->dev));
|
|
spi_dev_put(spi);
|
|
}
|
|
|
|
return AE_OK;
|
|
}
|
|
|
|
static acpi_status acpi_spi_add_device(acpi_handle handle, u32 level,
|
|
void *data, void **return_value)
|
|
{
|
|
struct spi_master *master = data;
|
|
struct acpi_device *adev;
|
|
|
|
if (acpi_bus_get_device(handle, &adev))
|
|
return AE_OK;
|
|
|
|
return acpi_register_spi_device(master, adev);
|
|
}
|
|
|
|
static void acpi_register_spi_devices(struct spi_master *master)
|
|
{
|
|
acpi_status status;
|
|
acpi_handle handle;
|
|
|
|
handle = ACPI_HANDLE(master->dev.parent);
|
|
if (!handle)
|
|
return;
|
|
|
|
status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
|
|
acpi_spi_add_device, NULL,
|
|
master, NULL);
|
|
if (ACPI_FAILURE(status))
|
|
dev_warn(&master->dev, "failed to enumerate SPI slaves\n");
|
|
}
|
|
#else
|
|
static inline void acpi_register_spi_devices(struct spi_master *master) {}
|
|
#endif /* CONFIG_ACPI */
|
|
|
|
static void spi_master_release(struct device *dev)
|
|
{
|
|
struct spi_master *master;
|
|
|
|
master = container_of(dev, struct spi_master, dev);
|
|
kfree(master);
|
|
}
|
|
|
|
static struct class spi_master_class = {
|
|
.name = "spi_master",
|
|
.owner = THIS_MODULE,
|
|
.dev_release = spi_master_release,
|
|
.dev_groups = spi_master_groups,
|
|
};
|
|
|
|
|
|
/**
|
|
* spi_alloc_master - allocate SPI master controller
|
|
* @dev: the controller, possibly using the platform_bus
|
|
* @size: how much zeroed driver-private data to allocate; the pointer to this
|
|
* memory is in the driver_data field of the returned device,
|
|
* accessible with spi_master_get_devdata().
|
|
* Context: can sleep
|
|
*
|
|
* This call is used only by SPI master controller drivers, which are the
|
|
* only ones directly touching chip registers. It's how they allocate
|
|
* an spi_master structure, prior to calling spi_register_master().
|
|
*
|
|
* This must be called from context that can sleep.
|
|
*
|
|
* The caller is responsible for assigning the bus number and initializing
|
|
* the master's methods before calling spi_register_master(); and (after errors
|
|
* adding the device) calling spi_master_put() to prevent a memory leak.
|
|
*
|
|
* Return: the SPI master structure on success, else NULL.
|
|
*/
|
|
struct spi_master *spi_alloc_master(struct device *dev, unsigned size)
|
|
{
|
|
struct spi_master *master;
|
|
|
|
if (!dev)
|
|
return NULL;
|
|
|
|
master = kzalloc(size + sizeof(*master), GFP_KERNEL);
|
|
if (!master)
|
|
return NULL;
|
|
|
|
device_initialize(&master->dev);
|
|
master->bus_num = -1;
|
|
master->num_chipselect = 1;
|
|
master->dev.class = &spi_master_class;
|
|
master->dev.parent = dev;
|
|
pm_suspend_ignore_children(&master->dev, true);
|
|
spi_master_set_devdata(master, &master[1]);
|
|
|
|
return master;
|
|
}
|
|
EXPORT_SYMBOL_GPL(spi_alloc_master);
|
|
|
|
#ifdef CONFIG_OF
|
|
static int of_spi_register_master(struct spi_master *master)
|
|
{
|
|
int nb, i, *cs;
|
|
struct device_node *np = master->dev.of_node;
|
|
|
|
if (!np)
|
|
return 0;
|
|
|
|
nb = of_gpio_named_count(np, "cs-gpios");
|
|
master->num_chipselect = max_t(int, nb, master->num_chipselect);
|
|
|
|
/* Return error only for an incorrectly formed cs-gpios property */
|
|
if (nb == 0 || nb == -ENOENT)
|
|
return 0;
|
|
else if (nb < 0)
|
|
return nb;
|
|
|
|
cs = devm_kzalloc(&master->dev,
|
|
sizeof(int) * master->num_chipselect,
|
|
GFP_KERNEL);
|
|
master->cs_gpios = cs;
|
|
|
|
if (!master->cs_gpios)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < master->num_chipselect; i++)
|
|
cs[i] = -ENOENT;
|
|
|
|
for (i = 0; i < nb; i++)
|
|
cs[i] = of_get_named_gpio(np, "cs-gpios", i);
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
static int of_spi_register_master(struct spi_master *master)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* spi_register_master - register SPI master controller
|
|
* @master: initialized master, originally from spi_alloc_master()
|
|
* Context: can sleep
|
|
*
|
|
* SPI master controllers connect to their drivers using some non-SPI bus,
|
|
* such as the platform bus. The final stage of probe() in that code
|
|
* includes calling spi_register_master() to hook up to this SPI bus glue.
|
|
*
|
|
* SPI controllers use board specific (often SOC specific) bus numbers,
|
|
* and board-specific addressing for SPI devices combines those numbers
|
|
* with chip select numbers. Since SPI does not directly support dynamic
|
|
* device identification, boards need configuration tables telling which
|
|
* chip is at which address.
|
|
*
|
|
* This must be called from context that can sleep. It returns zero on
|
|
* success, else a negative error code (dropping the master's refcount).
|
|
* After a successful return, the caller is responsible for calling
|
|
* spi_unregister_master().
|
|
*
|
|
* Return: zero on success, else a negative error code.
|
|
*/
|
|
int spi_register_master(struct spi_master *master)
|
|
{
|
|
static atomic_t dyn_bus_id = ATOMIC_INIT((1<<15) - 1);
|
|
struct device *dev = master->dev.parent;
|
|
struct boardinfo *bi;
|
|
int status = -ENODEV;
|
|
int dynamic = 0;
|
|
|
|
if (!dev)
|
|
return -ENODEV;
|
|
|
|
status = of_spi_register_master(master);
|
|
if (status)
|
|
return status;
|
|
|
|
/* even if it's just one always-selected device, there must
|
|
* be at least one chipselect
|
|
*/
|
|
if (master->num_chipselect == 0)
|
|
return -EINVAL;
|
|
|
|
if ((master->bus_num < 0) && master->dev.of_node)
|
|
master->bus_num = of_alias_get_id(master->dev.of_node, "spi");
|
|
|
|
/* convention: dynamically assigned bus IDs count down from the max */
|
|
if (master->bus_num < 0) {
|
|
/* FIXME switch to an IDR based scheme, something like
|
|
* I2C now uses, so we can't run out of "dynamic" IDs
|
|
*/
|
|
master->bus_num = atomic_dec_return(&dyn_bus_id);
|
|
dynamic = 1;
|
|
}
|
|
|
|
INIT_LIST_HEAD(&master->queue);
|
|
spin_lock_init(&master->queue_lock);
|
|
spin_lock_init(&master->bus_lock_spinlock);
|
|
mutex_init(&master->bus_lock_mutex);
|
|
mutex_init(&master->io_mutex);
|
|
master->bus_lock_flag = 0;
|
|
init_completion(&master->xfer_completion);
|
|
if (!master->max_dma_len)
|
|
master->max_dma_len = INT_MAX;
|
|
|
|
/* register the device, then userspace will see it.
|
|
* registration fails if the bus ID is in use.
|
|
*/
|
|
dev_set_name(&master->dev, "spi%u", master->bus_num);
|
|
status = device_add(&master->dev);
|
|
if (status < 0)
|
|
goto done;
|
|
dev_dbg(dev, "registered master %s%s\n", dev_name(&master->dev),
|
|
dynamic ? " (dynamic)" : "");
|
|
|
|
/* If we're using a queued driver, start the queue */
|
|
if (master->transfer)
|
|
dev_info(dev, "master is unqueued, this is deprecated\n");
|
|
else {
|
|
status = spi_master_initialize_queue(master);
|
|
if (status) {
|
|
device_del(&master->dev);
|
|
goto done;
|
|
}
|
|
}
|
|
/* add statistics */
|
|
spin_lock_init(&master->statistics.lock);
|
|
|
|
mutex_lock(&board_lock);
|
|
list_add_tail(&master->list, &spi_master_list);
|
|
list_for_each_entry(bi, &board_list, list)
|
|
spi_match_master_to_boardinfo(master, &bi->board_info);
|
|
mutex_unlock(&board_lock);
|
|
|
|
/* Register devices from the device tree and ACPI */
|
|
of_register_spi_devices(master);
|
|
acpi_register_spi_devices(master);
|
|
done:
|
|
return status;
|
|
}
|
|
EXPORT_SYMBOL_GPL(spi_register_master);
|
|
|
|
static void devm_spi_unregister(struct device *dev, void *res)
|
|
{
|
|
spi_unregister_master(*(struct spi_master **)res);
|
|
}
|
|
|
|
/**
|
|
* dev_spi_register_master - register managed SPI master controller
|
|
* @dev: device managing SPI master
|
|
* @master: initialized master, originally from spi_alloc_master()
|
|
* Context: can sleep
|
|
*
|
|
* Register a SPI device as with spi_register_master() which will
|
|
* automatically be unregister
|
|
*
|
|
* Return: zero on success, else a negative error code.
|
|
*/
|
|
int devm_spi_register_master(struct device *dev, struct spi_master *master)
|
|
{
|
|
struct spi_master **ptr;
|
|
int ret;
|
|
|
|
ptr = devres_alloc(devm_spi_unregister, sizeof(*ptr), GFP_KERNEL);
|
|
if (!ptr)
|
|
return -ENOMEM;
|
|
|
|
ret = spi_register_master(master);
|
|
if (!ret) {
|
|
*ptr = master;
|
|
devres_add(dev, ptr);
|
|
} else {
|
|
devres_free(ptr);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(devm_spi_register_master);
|
|
|
|
static int __unregister(struct device *dev, void *null)
|
|
{
|
|
spi_unregister_device(to_spi_device(dev));
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* spi_unregister_master - unregister SPI master controller
|
|
* @master: the master being unregistered
|
|
* Context: can sleep
|
|
*
|
|
* This call is used only by SPI master controller drivers, which are the
|
|
* only ones directly touching chip registers.
|
|
*
|
|
* This must be called from context that can sleep.
|
|
*/
|
|
void spi_unregister_master(struct spi_master *master)
|
|
{
|
|
int dummy;
|
|
|
|
if (master->queued) {
|
|
if (spi_destroy_queue(master))
|
|
dev_err(&master->dev, "queue remove failed\n");
|
|
}
|
|
|
|
mutex_lock(&board_lock);
|
|
list_del(&master->list);
|
|
mutex_unlock(&board_lock);
|
|
|
|
dummy = device_for_each_child(&master->dev, NULL, __unregister);
|
|
device_unregister(&master->dev);
|
|
}
|
|
EXPORT_SYMBOL_GPL(spi_unregister_master);
|
|
|
|
int spi_master_suspend(struct spi_master *master)
|
|
{
|
|
int ret;
|
|
|
|
/* Basically no-ops for non-queued masters */
|
|
if (!master->queued)
|
|
return 0;
|
|
|
|
ret = spi_stop_queue(master);
|
|
if (ret)
|
|
dev_err(&master->dev, "queue stop failed\n");
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(spi_master_suspend);
|
|
|
|
int spi_master_resume(struct spi_master *master)
|
|
{
|
|
int ret;
|
|
|
|
if (!master->queued)
|
|
return 0;
|
|
|
|
ret = spi_start_queue(master);
|
|
if (ret)
|
|
dev_err(&master->dev, "queue restart failed\n");
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(spi_master_resume);
|
|
|
|
static int __spi_master_match(struct device *dev, const void *data)
|
|
{
|
|
struct spi_master *m;
|
|
const u16 *bus_num = data;
|
|
|
|
m = container_of(dev, struct spi_master, dev);
|
|
return m->bus_num == *bus_num;
|
|
}
|
|
|
|
/**
|
|
* spi_busnum_to_master - look up master associated with bus_num
|
|
* @bus_num: the master's bus number
|
|
* Context: can sleep
|
|
*
|
|
* This call may be used with devices that are registered after
|
|
* arch init time. It returns a refcounted pointer to the relevant
|
|
* spi_master (which the caller must release), or NULL if there is
|
|
* no such master registered.
|
|
*
|
|
* Return: the SPI master structure on success, else NULL.
|
|
*/
|
|
struct spi_master *spi_busnum_to_master(u16 bus_num)
|
|
{
|
|
struct device *dev;
|
|
struct spi_master *master = NULL;
|
|
|
|
dev = class_find_device(&spi_master_class, NULL, &bus_num,
|
|
__spi_master_match);
|
|
if (dev)
|
|
master = container_of(dev, struct spi_master, dev);
|
|
/* reference got in class_find_device */
|
|
return master;
|
|
}
|
|
EXPORT_SYMBOL_GPL(spi_busnum_to_master);
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* Core methods for SPI resource management */
|
|
|
|
/**
|
|
* spi_res_alloc - allocate a spi resource that is life-cycle managed
|
|
* during the processing of a spi_message while using
|
|
* spi_transfer_one
|
|
* @spi: the spi device for which we allocate memory
|
|
* @release: the release code to execute for this resource
|
|
* @size: size to alloc and return
|
|
* @gfp: GFP allocation flags
|
|
*
|
|
* Return: the pointer to the allocated data
|
|
*
|
|
* This may get enhanced in the future to allocate from a memory pool
|
|
* of the @spi_device or @spi_master to avoid repeated allocations.
|
|
*/
|
|
void *spi_res_alloc(struct spi_device *spi,
|
|
spi_res_release_t release,
|
|
size_t size, gfp_t gfp)
|
|
{
|
|
struct spi_res *sres;
|
|
|
|
sres = kzalloc(sizeof(*sres) + size, gfp);
|
|
if (!sres)
|
|
return NULL;
|
|
|
|
INIT_LIST_HEAD(&sres->entry);
|
|
sres->release = release;
|
|
|
|
return sres->data;
|
|
}
|
|
EXPORT_SYMBOL_GPL(spi_res_alloc);
|
|
|
|
/**
|
|
* spi_res_free - free an spi resource
|
|
* @res: pointer to the custom data of a resource
|
|
*
|
|
*/
|
|
void spi_res_free(void *res)
|
|
{
|
|
struct spi_res *sres = container_of(res, struct spi_res, data);
|
|
|
|
if (!res)
|
|
return;
|
|
|
|
WARN_ON(!list_empty(&sres->entry));
|
|
kfree(sres);
|
|
}
|
|
EXPORT_SYMBOL_GPL(spi_res_free);
|
|
|
|
/**
|
|
* spi_res_add - add a spi_res to the spi_message
|
|
* @message: the spi message
|
|
* @res: the spi_resource
|
|
*/
|
|
void spi_res_add(struct spi_message *message, void *res)
|
|
{
|
|
struct spi_res *sres = container_of(res, struct spi_res, data);
|
|
|
|
WARN_ON(!list_empty(&sres->entry));
|
|
list_add_tail(&sres->entry, &message->resources);
|
|
}
|
|
EXPORT_SYMBOL_GPL(spi_res_add);
|
|
|
|
/**
|
|
* spi_res_release - release all spi resources for this message
|
|
* @master: the @spi_master
|
|
* @message: the @spi_message
|
|
*/
|
|
void spi_res_release(struct spi_master *master,
|
|
struct spi_message *message)
|
|
{
|
|
struct spi_res *res;
|
|
|
|
while (!list_empty(&message->resources)) {
|
|
res = list_last_entry(&message->resources,
|
|
struct spi_res, entry);
|
|
|
|
if (res->release)
|
|
res->release(master, message, res->data);
|
|
|
|
list_del(&res->entry);
|
|
|
|
kfree(res);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(spi_res_release);
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* Core methods for spi_message alterations */
|
|
|
|
static void __spi_replace_transfers_release(struct spi_master *master,
|
|
struct spi_message *msg,
|
|
void *res)
|
|
{
|
|
struct spi_replaced_transfers *rxfer = res;
|
|
size_t i;
|
|
|
|
/* call extra callback if requested */
|
|
if (rxfer->release)
|
|
rxfer->release(master, msg, res);
|
|
|
|
/* insert replaced transfers back into the message */
|
|
list_splice(&rxfer->replaced_transfers, rxfer->replaced_after);
|
|
|
|
/* remove the formerly inserted entries */
|
|
for (i = 0; i < rxfer->inserted; i++)
|
|
list_del(&rxfer->inserted_transfers[i].transfer_list);
|
|
}
|
|
|
|
/**
|
|
* spi_replace_transfers - replace transfers with several transfers
|
|
* and register change with spi_message.resources
|
|
* @msg: the spi_message we work upon
|
|
* @xfer_first: the first spi_transfer we want to replace
|
|
* @remove: number of transfers to remove
|
|
* @insert: the number of transfers we want to insert instead
|
|
* @release: extra release code necessary in some circumstances
|
|
* @extradatasize: extra data to allocate (with alignment guarantees
|
|
* of struct @spi_transfer)
|
|
* @gfp: gfp flags
|
|
*
|
|
* Returns: pointer to @spi_replaced_transfers,
|
|
* PTR_ERR(...) in case of errors.
|
|
*/
|
|
struct spi_replaced_transfers *spi_replace_transfers(
|
|
struct spi_message *msg,
|
|
struct spi_transfer *xfer_first,
|
|
size_t remove,
|
|
size_t insert,
|
|
spi_replaced_release_t release,
|
|
size_t extradatasize,
|
|
gfp_t gfp)
|
|
{
|
|
struct spi_replaced_transfers *rxfer;
|
|
struct spi_transfer *xfer;
|
|
size_t i;
|
|
|
|
/* allocate the structure using spi_res */
|
|
rxfer = spi_res_alloc(msg->spi, __spi_replace_transfers_release,
|
|
insert * sizeof(struct spi_transfer)
|
|
+ sizeof(struct spi_replaced_transfers)
|
|
+ extradatasize,
|
|
gfp);
|
|
if (!rxfer)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
/* the release code to invoke before running the generic release */
|
|
rxfer->release = release;
|
|
|
|
/* assign extradata */
|
|
if (extradatasize)
|
|
rxfer->extradata =
|
|
&rxfer->inserted_transfers[insert];
|
|
|
|
/* init the replaced_transfers list */
|
|
INIT_LIST_HEAD(&rxfer->replaced_transfers);
|
|
|
|
/* assign the list_entry after which we should reinsert
|
|
* the @replaced_transfers - it may be spi_message.messages!
|
|
*/
|
|
rxfer->replaced_after = xfer_first->transfer_list.prev;
|
|
|
|
/* remove the requested number of transfers */
|
|
for (i = 0; i < remove; i++) {
|
|
/* if the entry after replaced_after it is msg->transfers
|
|
* then we have been requested to remove more transfers
|
|
* than are in the list
|
|
*/
|
|
if (rxfer->replaced_after->next == &msg->transfers) {
|
|
dev_err(&msg->spi->dev,
|
|
"requested to remove more spi_transfers than are available\n");
|
|
/* insert replaced transfers back into the message */
|
|
list_splice(&rxfer->replaced_transfers,
|
|
rxfer->replaced_after);
|
|
|
|
/* free the spi_replace_transfer structure */
|
|
spi_res_free(rxfer);
|
|
|
|
/* and return with an error */
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
|
|
/* remove the entry after replaced_after from list of
|
|
* transfers and add it to list of replaced_transfers
|
|
*/
|
|
list_move_tail(rxfer->replaced_after->next,
|
|
&rxfer->replaced_transfers);
|
|
}
|
|
|
|
/* create copy of the given xfer with identical settings
|
|
* based on the first transfer to get removed
|
|
*/
|
|
for (i = 0; i < insert; i++) {
|
|
/* we need to run in reverse order */
|
|
xfer = &rxfer->inserted_transfers[insert - 1 - i];
|
|
|
|
/* copy all spi_transfer data */
|
|
memcpy(xfer, xfer_first, sizeof(*xfer));
|
|
|
|
/* add to list */
|
|
list_add(&xfer->transfer_list, rxfer->replaced_after);
|
|
|
|
/* clear cs_change and delay_usecs for all but the last */
|
|
if (i) {
|
|
xfer->cs_change = false;
|
|
xfer->delay_usecs = 0;
|
|
}
|
|
}
|
|
|
|
/* set up inserted */
|
|
rxfer->inserted = insert;
|
|
|
|
/* and register it with spi_res/spi_message */
|
|
spi_res_add(msg, rxfer);
|
|
|
|
return rxfer;
|
|
}
|
|
EXPORT_SYMBOL_GPL(spi_replace_transfers);
|
|
|
|
static int __spi_split_transfer_maxsize(struct spi_master *master,
|
|
struct spi_message *msg,
|
|
struct spi_transfer **xferp,
|
|
size_t maxsize,
|
|
gfp_t gfp)
|
|
{
|
|
struct spi_transfer *xfer = *xferp, *xfers;
|
|
struct spi_replaced_transfers *srt;
|
|
size_t offset;
|
|
size_t count, i;
|
|
|
|
/* warn once about this fact that we are splitting a transfer */
|
|
dev_warn_once(&msg->spi->dev,
|
|
"spi_transfer of length %i exceed max length of %zu - needed to split transfers\n",
|
|
xfer->len, maxsize);
|
|
|
|
/* calculate how many we have to replace */
|
|
count = DIV_ROUND_UP(xfer->len, maxsize);
|
|
|
|
/* create replacement */
|
|
srt = spi_replace_transfers(msg, xfer, 1, count, NULL, 0, gfp);
|
|
if (IS_ERR(srt))
|
|
return PTR_ERR(srt);
|
|
xfers = srt->inserted_transfers;
|
|
|
|
/* now handle each of those newly inserted spi_transfers
|
|
* note that the replacements spi_transfers all are preset
|
|
* to the same values as *xferp, so tx_buf, rx_buf and len
|
|
* are all identical (as well as most others)
|
|
* so we just have to fix up len and the pointers.
|
|
*
|
|
* this also includes support for the depreciated
|
|
* spi_message.is_dma_mapped interface
|
|
*/
|
|
|
|
/* the first transfer just needs the length modified, so we
|
|
* run it outside the loop
|
|
*/
|
|
xfers[0].len = min_t(size_t, maxsize, xfer[0].len);
|
|
|
|
/* all the others need rx_buf/tx_buf also set */
|
|
for (i = 1, offset = maxsize; i < count; offset += maxsize, i++) {
|
|
/* update rx_buf, tx_buf and dma */
|
|
if (xfers[i].rx_buf)
|
|
xfers[i].rx_buf += offset;
|
|
if (xfers[i].rx_dma)
|
|
xfers[i].rx_dma += offset;
|
|
if (xfers[i].tx_buf)
|
|
xfers[i].tx_buf += offset;
|
|
if (xfers[i].tx_dma)
|
|
xfers[i].tx_dma += offset;
|
|
|
|
/* update length */
|
|
xfers[i].len = min(maxsize, xfers[i].len - offset);
|
|
}
|
|
|
|
/* we set up xferp to the last entry we have inserted,
|
|
* so that we skip those already split transfers
|
|
*/
|
|
*xferp = &xfers[count - 1];
|
|
|
|
/* increment statistics counters */
|
|
SPI_STATISTICS_INCREMENT_FIELD(&master->statistics,
|
|
transfers_split_maxsize);
|
|
SPI_STATISTICS_INCREMENT_FIELD(&msg->spi->statistics,
|
|
transfers_split_maxsize);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* spi_split_tranfers_maxsize - split spi transfers into multiple transfers
|
|
* when an individual transfer exceeds a
|
|
* certain size
|
|
* @master: the @spi_master for this transfer
|
|
* @msg: the @spi_message to transform
|
|
* @maxsize: the maximum when to apply this
|
|
* @gfp: GFP allocation flags
|
|
*
|
|
* Return: status of transformation
|
|
*/
|
|
int spi_split_transfers_maxsize(struct spi_master *master,
|
|
struct spi_message *msg,
|
|
size_t maxsize,
|
|
gfp_t gfp)
|
|
{
|
|
struct spi_transfer *xfer;
|
|
int ret;
|
|
|
|
/* iterate over the transfer_list,
|
|
* but note that xfer is advanced to the last transfer inserted
|
|
* to avoid checking sizes again unnecessarily (also xfer does
|
|
* potentiall belong to a different list by the time the
|
|
* replacement has happened
|
|
*/
|
|
list_for_each_entry(xfer, &msg->transfers, transfer_list) {
|
|
if (xfer->len > maxsize) {
|
|
ret = __spi_split_transfer_maxsize(
|
|
master, msg, &xfer, maxsize, gfp);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(spi_split_transfers_maxsize);
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* Core methods for SPI master protocol drivers. Some of the
|
|
* other core methods are currently defined as inline functions.
|
|
*/
|
|
|
|
static int __spi_validate_bits_per_word(struct spi_master *master, u8 bits_per_word)
|
|
{
|
|
if (master->bits_per_word_mask) {
|
|
/* Only 32 bits fit in the mask */
|
|
if (bits_per_word > 32)
|
|
return -EINVAL;
|
|
if (!(master->bits_per_word_mask &
|
|
SPI_BPW_MASK(bits_per_word)))
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* spi_setup - setup SPI mode and clock rate
|
|
* @spi: the device whose settings are being modified
|
|
* Context: can sleep, and no requests are queued to the device
|
|
*
|
|
* SPI protocol drivers may need to update the transfer mode if the
|
|
* device doesn't work with its default. They may likewise need
|
|
* to update clock rates or word sizes from initial values. This function
|
|
* changes those settings, and must be called from a context that can sleep.
|
|
* Except for SPI_CS_HIGH, which takes effect immediately, the changes take
|
|
* effect the next time the device is selected and data is transferred to
|
|
* or from it. When this function returns, the spi device is deselected.
|
|
*
|
|
* Note that this call will fail if the protocol driver specifies an option
|
|
* that the underlying controller or its driver does not support. For
|
|
* example, not all hardware supports wire transfers using nine bit words,
|
|
* LSB-first wire encoding, or active-high chipselects.
|
|
*
|
|
* Return: zero on success, else a negative error code.
|
|
*/
|
|
int spi_setup(struct spi_device *spi)
|
|
{
|
|
unsigned bad_bits, ugly_bits;
|
|
int status;
|
|
|
|
/* check mode to prevent that DUAL and QUAD set at the same time
|
|
*/
|
|
if (((spi->mode & SPI_TX_DUAL) && (spi->mode & SPI_TX_QUAD)) ||
|
|
((spi->mode & SPI_RX_DUAL) && (spi->mode & SPI_RX_QUAD))) {
|
|
dev_err(&spi->dev,
|
|
"setup: can not select dual and quad at the same time\n");
|
|
return -EINVAL;
|
|
}
|
|
/* if it is SPI_3WIRE mode, DUAL and QUAD should be forbidden
|
|
*/
|
|
if ((spi->mode & SPI_3WIRE) && (spi->mode &
|
|
(SPI_TX_DUAL | SPI_TX_QUAD | SPI_RX_DUAL | SPI_RX_QUAD)))
|
|
return -EINVAL;
|
|
/* help drivers fail *cleanly* when they need options
|
|
* that aren't supported with their current master
|
|
*/
|
|
bad_bits = spi->mode & ~spi->master->mode_bits;
|
|
ugly_bits = bad_bits &
|
|
(SPI_TX_DUAL | SPI_TX_QUAD | SPI_RX_DUAL | SPI_RX_QUAD);
|
|
if (ugly_bits) {
|
|
dev_warn(&spi->dev,
|
|
"setup: ignoring unsupported mode bits %x\n",
|
|
ugly_bits);
|
|
spi->mode &= ~ugly_bits;
|
|
bad_bits &= ~ugly_bits;
|
|
}
|
|
if (bad_bits) {
|
|
dev_err(&spi->dev, "setup: unsupported mode bits %x\n",
|
|
bad_bits);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!spi->bits_per_word)
|
|
spi->bits_per_word = 8;
|
|
|
|
status = __spi_validate_bits_per_word(spi->master, spi->bits_per_word);
|
|
if (status)
|
|
return status;
|
|
|
|
if (!spi->max_speed_hz)
|
|
spi->max_speed_hz = spi->master->max_speed_hz;
|
|
|
|
if (spi->master->setup)
|
|
status = spi->master->setup(spi);
|
|
|
|
spi_set_cs(spi, false);
|
|
|
|
dev_dbg(&spi->dev, "setup mode %d, %s%s%s%s%u bits/w, %u Hz max --> %d\n",
|
|
(int) (spi->mode & (SPI_CPOL | SPI_CPHA)),
|
|
(spi->mode & SPI_CS_HIGH) ? "cs_high, " : "",
|
|
(spi->mode & SPI_LSB_FIRST) ? "lsb, " : "",
|
|
(spi->mode & SPI_3WIRE) ? "3wire, " : "",
|
|
(spi->mode & SPI_LOOP) ? "loopback, " : "",
|
|
spi->bits_per_word, spi->max_speed_hz,
|
|
status);
|
|
|
|
return status;
|
|
}
|
|
EXPORT_SYMBOL_GPL(spi_setup);
|
|
|
|
static int __spi_validate(struct spi_device *spi, struct spi_message *message)
|
|
{
|
|
struct spi_master *master = spi->master;
|
|
struct spi_transfer *xfer;
|
|
int w_size;
|
|
|
|
if (list_empty(&message->transfers))
|
|
return -EINVAL;
|
|
|
|
/* Half-duplex links include original MicroWire, and ones with
|
|
* only one data pin like SPI_3WIRE (switches direction) or where
|
|
* either MOSI or MISO is missing. They can also be caused by
|
|
* software limitations.
|
|
*/
|
|
if ((master->flags & SPI_MASTER_HALF_DUPLEX)
|
|
|| (spi->mode & SPI_3WIRE)) {
|
|
unsigned flags = master->flags;
|
|
|
|
list_for_each_entry(xfer, &message->transfers, transfer_list) {
|
|
if (xfer->rx_buf && xfer->tx_buf)
|
|
return -EINVAL;
|
|
if ((flags & SPI_MASTER_NO_TX) && xfer->tx_buf)
|
|
return -EINVAL;
|
|
if ((flags & SPI_MASTER_NO_RX) && xfer->rx_buf)
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Set transfer bits_per_word and max speed as spi device default if
|
|
* it is not set for this transfer.
|
|
* Set transfer tx_nbits and rx_nbits as single transfer default
|
|
* (SPI_NBITS_SINGLE) if it is not set for this transfer.
|
|
*/
|
|
message->frame_length = 0;
|
|
list_for_each_entry(xfer, &message->transfers, transfer_list) {
|
|
message->frame_length += xfer->len;
|
|
if (!xfer->bits_per_word)
|
|
xfer->bits_per_word = spi->bits_per_word;
|
|
|
|
if (!xfer->speed_hz)
|
|
xfer->speed_hz = spi->max_speed_hz;
|
|
if (!xfer->speed_hz)
|
|
xfer->speed_hz = master->max_speed_hz;
|
|
|
|
if (master->max_speed_hz &&
|
|
xfer->speed_hz > master->max_speed_hz)
|
|
xfer->speed_hz = master->max_speed_hz;
|
|
|
|
if (__spi_validate_bits_per_word(master, xfer->bits_per_word))
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* SPI transfer length should be multiple of SPI word size
|
|
* where SPI word size should be power-of-two multiple
|
|
*/
|
|
if (xfer->bits_per_word <= 8)
|
|
w_size = 1;
|
|
else if (xfer->bits_per_word <= 16)
|
|
w_size = 2;
|
|
else
|
|
w_size = 4;
|
|
|
|
/* No partial transfers accepted */
|
|
if (xfer->len % w_size)
|
|
return -EINVAL;
|
|
|
|
if (xfer->speed_hz && master->min_speed_hz &&
|
|
xfer->speed_hz < master->min_speed_hz)
|
|
return -EINVAL;
|
|
|
|
if (xfer->tx_buf && !xfer->tx_nbits)
|
|
xfer->tx_nbits = SPI_NBITS_SINGLE;
|
|
if (xfer->rx_buf && !xfer->rx_nbits)
|
|
xfer->rx_nbits = SPI_NBITS_SINGLE;
|
|
/* check transfer tx/rx_nbits:
|
|
* 1. check the value matches one of single, dual and quad
|
|
* 2. check tx/rx_nbits match the mode in spi_device
|
|
*/
|
|
if (xfer->tx_buf) {
|
|
if (xfer->tx_nbits != SPI_NBITS_SINGLE &&
|
|
xfer->tx_nbits != SPI_NBITS_DUAL &&
|
|
xfer->tx_nbits != SPI_NBITS_QUAD)
|
|
return -EINVAL;
|
|
if ((xfer->tx_nbits == SPI_NBITS_DUAL) &&
|
|
!(spi->mode & (SPI_TX_DUAL | SPI_TX_QUAD)))
|
|
return -EINVAL;
|
|
if ((xfer->tx_nbits == SPI_NBITS_QUAD) &&
|
|
!(spi->mode & SPI_TX_QUAD))
|
|
return -EINVAL;
|
|
}
|
|
/* check transfer rx_nbits */
|
|
if (xfer->rx_buf) {
|
|
if (xfer->rx_nbits != SPI_NBITS_SINGLE &&
|
|
xfer->rx_nbits != SPI_NBITS_DUAL &&
|
|
xfer->rx_nbits != SPI_NBITS_QUAD)
|
|
return -EINVAL;
|
|
if ((xfer->rx_nbits == SPI_NBITS_DUAL) &&
|
|
!(spi->mode & (SPI_RX_DUAL | SPI_RX_QUAD)))
|
|
return -EINVAL;
|
|
if ((xfer->rx_nbits == SPI_NBITS_QUAD) &&
|
|
!(spi->mode & SPI_RX_QUAD))
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
message->status = -EINPROGRESS;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __spi_async(struct spi_device *spi, struct spi_message *message)
|
|
{
|
|
struct spi_master *master = spi->master;
|
|
|
|
message->spi = spi;
|
|
|
|
SPI_STATISTICS_INCREMENT_FIELD(&master->statistics, spi_async);
|
|
SPI_STATISTICS_INCREMENT_FIELD(&spi->statistics, spi_async);
|
|
|
|
trace_spi_message_submit(message);
|
|
|
|
return master->transfer(spi, message);
|
|
}
|
|
|
|
/**
|
|
* spi_async - asynchronous SPI transfer
|
|
* @spi: device with which data will be exchanged
|
|
* @message: describes the data transfers, including completion callback
|
|
* Context: any (irqs may be blocked, etc)
|
|
*
|
|
* This call may be used in_irq and other contexts which can't sleep,
|
|
* as well as from task contexts which can sleep.
|
|
*
|
|
* The completion callback is invoked in a context which can't sleep.
|
|
* Before that invocation, the value of message->status is undefined.
|
|
* When the callback is issued, message->status holds either zero (to
|
|
* indicate complete success) or a negative error code. After that
|
|
* callback returns, the driver which issued the transfer request may
|
|
* deallocate the associated memory; it's no longer in use by any SPI
|
|
* core or controller driver code.
|
|
*
|
|
* Note that although all messages to a spi_device are handled in
|
|
* FIFO order, messages may go to different devices in other orders.
|
|
* Some device might be higher priority, or have various "hard" access
|
|
* time requirements, for example.
|
|
*
|
|
* On detection of any fault during the transfer, processing of
|
|
* the entire message is aborted, and the device is deselected.
|
|
* Until returning from the associated message completion callback,
|
|
* no other spi_message queued to that device will be processed.
|
|
* (This rule applies equally to all the synchronous transfer calls,
|
|
* which are wrappers around this core asynchronous primitive.)
|
|
*
|
|
* Return: zero on success, else a negative error code.
|
|
*/
|
|
int spi_async(struct spi_device *spi, struct spi_message *message)
|
|
{
|
|
struct spi_master *master = spi->master;
|
|
int ret;
|
|
unsigned long flags;
|
|
|
|
ret = __spi_validate(spi, message);
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
spin_lock_irqsave(&master->bus_lock_spinlock, flags);
|
|
|
|
if (master->bus_lock_flag)
|
|
ret = -EBUSY;
|
|
else
|
|
ret = __spi_async(spi, message);
|
|
|
|
spin_unlock_irqrestore(&master->bus_lock_spinlock, flags);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(spi_async);
|
|
|
|
/**
|
|
* spi_async_locked - version of spi_async with exclusive bus usage
|
|
* @spi: device with which data will be exchanged
|
|
* @message: describes the data transfers, including completion callback
|
|
* Context: any (irqs may be blocked, etc)
|
|
*
|
|
* This call may be used in_irq and other contexts which can't sleep,
|
|
* as well as from task contexts which can sleep.
|
|
*
|
|
* The completion callback is invoked in a context which can't sleep.
|
|
* Before that invocation, the value of message->status is undefined.
|
|
* When the callback is issued, message->status holds either zero (to
|
|
* indicate complete success) or a negative error code. After that
|
|
* callback returns, the driver which issued the transfer request may
|
|
* deallocate the associated memory; it's no longer in use by any SPI
|
|
* core or controller driver code.
|
|
*
|
|
* Note that although all messages to a spi_device are handled in
|
|
* FIFO order, messages may go to different devices in other orders.
|
|
* Some device might be higher priority, or have various "hard" access
|
|
* time requirements, for example.
|
|
*
|
|
* On detection of any fault during the transfer, processing of
|
|
* the entire message is aborted, and the device is deselected.
|
|
* Until returning from the associated message completion callback,
|
|
* no other spi_message queued to that device will be processed.
|
|
* (This rule applies equally to all the synchronous transfer calls,
|
|
* which are wrappers around this core asynchronous primitive.)
|
|
*
|
|
* Return: zero on success, else a negative error code.
|
|
*/
|
|
int spi_async_locked(struct spi_device *spi, struct spi_message *message)
|
|
{
|
|
struct spi_master *master = spi->master;
|
|
int ret;
|
|
unsigned long flags;
|
|
|
|
ret = __spi_validate(spi, message);
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
spin_lock_irqsave(&master->bus_lock_spinlock, flags);
|
|
|
|
ret = __spi_async(spi, message);
|
|
|
|
spin_unlock_irqrestore(&master->bus_lock_spinlock, flags);
|
|
|
|
return ret;
|
|
|
|
}
|
|
EXPORT_SYMBOL_GPL(spi_async_locked);
|
|
|
|
|
|
int spi_flash_read(struct spi_device *spi,
|
|
struct spi_flash_read_message *msg)
|
|
|
|
{
|
|
struct spi_master *master = spi->master;
|
|
struct device *rx_dev = NULL;
|
|
int ret;
|
|
|
|
if ((msg->opcode_nbits == SPI_NBITS_DUAL ||
|
|
msg->addr_nbits == SPI_NBITS_DUAL) &&
|
|
!(spi->mode & (SPI_TX_DUAL | SPI_TX_QUAD)))
|
|
return -EINVAL;
|
|
if ((msg->opcode_nbits == SPI_NBITS_QUAD ||
|
|
msg->addr_nbits == SPI_NBITS_QUAD) &&
|
|
!(spi->mode & SPI_TX_QUAD))
|
|
return -EINVAL;
|
|
if (msg->data_nbits == SPI_NBITS_DUAL &&
|
|
!(spi->mode & (SPI_RX_DUAL | SPI_RX_QUAD)))
|
|
return -EINVAL;
|
|
if (msg->data_nbits == SPI_NBITS_QUAD &&
|
|
!(spi->mode & SPI_RX_QUAD))
|
|
return -EINVAL;
|
|
|
|
if (master->auto_runtime_pm) {
|
|
ret = pm_runtime_get_sync(master->dev.parent);
|
|
if (ret < 0) {
|
|
dev_err(&master->dev, "Failed to power device: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
mutex_lock(&master->bus_lock_mutex);
|
|
mutex_lock(&master->io_mutex);
|
|
if (master->dma_rx) {
|
|
rx_dev = master->dma_rx->device->dev;
|
|
ret = spi_map_buf(master, rx_dev, &msg->rx_sg,
|
|
msg->buf, msg->len,
|
|
DMA_FROM_DEVICE);
|
|
if (!ret)
|
|
msg->cur_msg_mapped = true;
|
|
}
|
|
ret = master->spi_flash_read(spi, msg);
|
|
if (msg->cur_msg_mapped)
|
|
spi_unmap_buf(master, rx_dev, &msg->rx_sg,
|
|
DMA_FROM_DEVICE);
|
|
mutex_unlock(&master->io_mutex);
|
|
mutex_unlock(&master->bus_lock_mutex);
|
|
|
|
if (master->auto_runtime_pm)
|
|
pm_runtime_put(master->dev.parent);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(spi_flash_read);
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* Utility methods for SPI master protocol drivers, layered on
|
|
* top of the core. Some other utility methods are defined as
|
|
* inline functions.
|
|
*/
|
|
|
|
static void spi_complete(void *arg)
|
|
{
|
|
complete(arg);
|
|
}
|
|
|
|
static int __spi_sync(struct spi_device *spi, struct spi_message *message)
|
|
{
|
|
DECLARE_COMPLETION_ONSTACK(done);
|
|
int status;
|
|
struct spi_master *master = spi->master;
|
|
unsigned long flags;
|
|
|
|
status = __spi_validate(spi, message);
|
|
if (status != 0)
|
|
return status;
|
|
|
|
message->complete = spi_complete;
|
|
message->context = &done;
|
|
message->spi = spi;
|
|
|
|
SPI_STATISTICS_INCREMENT_FIELD(&master->statistics, spi_sync);
|
|
SPI_STATISTICS_INCREMENT_FIELD(&spi->statistics, spi_sync);
|
|
|
|
/* If we're not using the legacy transfer method then we will
|
|
* try to transfer in the calling context so special case.
|
|
* This code would be less tricky if we could remove the
|
|
* support for driver implemented message queues.
|
|
*/
|
|
if (master->transfer == spi_queued_transfer) {
|
|
spin_lock_irqsave(&master->bus_lock_spinlock, flags);
|
|
|
|
trace_spi_message_submit(message);
|
|
|
|
status = __spi_queued_transfer(spi, message, false);
|
|
|
|
spin_unlock_irqrestore(&master->bus_lock_spinlock, flags);
|
|
} else {
|
|
status = spi_async_locked(spi, message);
|
|
}
|
|
|
|
if (status == 0) {
|
|
/* Push out the messages in the calling context if we
|
|
* can.
|
|
*/
|
|
if (master->transfer == spi_queued_transfer) {
|
|
SPI_STATISTICS_INCREMENT_FIELD(&master->statistics,
|
|
spi_sync_immediate);
|
|
SPI_STATISTICS_INCREMENT_FIELD(&spi->statistics,
|
|
spi_sync_immediate);
|
|
__spi_pump_messages(master, false);
|
|
}
|
|
|
|
wait_for_completion(&done);
|
|
status = message->status;
|
|
}
|
|
message->context = NULL;
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* spi_sync - blocking/synchronous SPI data transfers
|
|
* @spi: device with which data will be exchanged
|
|
* @message: describes the data transfers
|
|
* Context: can sleep
|
|
*
|
|
* This call may only be used from a context that may sleep. The sleep
|
|
* is non-interruptible, and has no timeout. Low-overhead controller
|
|
* drivers may DMA directly into and out of the message buffers.
|
|
*
|
|
* Note that the SPI device's chip select is active during the message,
|
|
* and then is normally disabled between messages. Drivers for some
|
|
* frequently-used devices may want to minimize costs of selecting a chip,
|
|
* by leaving it selected in anticipation that the next message will go
|
|
* to the same chip. (That may increase power usage.)
|
|
*
|
|
* Also, the caller is guaranteeing that the memory associated with the
|
|
* message will not be freed before this call returns.
|
|
*
|
|
* Return: zero on success, else a negative error code.
|
|
*/
|
|
int spi_sync(struct spi_device *spi, struct spi_message *message)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&spi->master->bus_lock_mutex);
|
|
ret = __spi_sync(spi, message);
|
|
mutex_unlock(&spi->master->bus_lock_mutex);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(spi_sync);
|
|
|
|
/**
|
|
* spi_sync_locked - version of spi_sync with exclusive bus usage
|
|
* @spi: device with which data will be exchanged
|
|
* @message: describes the data transfers
|
|
* Context: can sleep
|
|
*
|
|
* This call may only be used from a context that may sleep. The sleep
|
|
* is non-interruptible, and has no timeout. Low-overhead controller
|
|
* drivers may DMA directly into and out of the message buffers.
|
|
*
|
|
* This call should be used by drivers that require exclusive access to the
|
|
* SPI bus. It has to be preceded by a spi_bus_lock call. The SPI bus must
|
|
* be released by a spi_bus_unlock call when the exclusive access is over.
|
|
*
|
|
* Return: zero on success, else a negative error code.
|
|
*/
|
|
int spi_sync_locked(struct spi_device *spi, struct spi_message *message)
|
|
{
|
|
return __spi_sync(spi, message);
|
|
}
|
|
EXPORT_SYMBOL_GPL(spi_sync_locked);
|
|
|
|
/**
|
|
* spi_bus_lock - obtain a lock for exclusive SPI bus usage
|
|
* @master: SPI bus master that should be locked for exclusive bus access
|
|
* Context: can sleep
|
|
*
|
|
* This call may only be used from a context that may sleep. The sleep
|
|
* is non-interruptible, and has no timeout.
|
|
*
|
|
* This call should be used by drivers that require exclusive access to the
|
|
* SPI bus. The SPI bus must be released by a spi_bus_unlock call when the
|
|
* exclusive access is over. Data transfer must be done by spi_sync_locked
|
|
* and spi_async_locked calls when the SPI bus lock is held.
|
|
*
|
|
* Return: always zero.
|
|
*/
|
|
int spi_bus_lock(struct spi_master *master)
|
|
{
|
|
unsigned long flags;
|
|
|
|
mutex_lock(&master->bus_lock_mutex);
|
|
|
|
spin_lock_irqsave(&master->bus_lock_spinlock, flags);
|
|
master->bus_lock_flag = 1;
|
|
spin_unlock_irqrestore(&master->bus_lock_spinlock, flags);
|
|
|
|
/* mutex remains locked until spi_bus_unlock is called */
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(spi_bus_lock);
|
|
|
|
/**
|
|
* spi_bus_unlock - release the lock for exclusive SPI bus usage
|
|
* @master: SPI bus master that was locked for exclusive bus access
|
|
* Context: can sleep
|
|
*
|
|
* This call may only be used from a context that may sleep. The sleep
|
|
* is non-interruptible, and has no timeout.
|
|
*
|
|
* This call releases an SPI bus lock previously obtained by an spi_bus_lock
|
|
* call.
|
|
*
|
|
* Return: always zero.
|
|
*/
|
|
int spi_bus_unlock(struct spi_master *master)
|
|
{
|
|
master->bus_lock_flag = 0;
|
|
|
|
mutex_unlock(&master->bus_lock_mutex);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(spi_bus_unlock);
|
|
|
|
/* portable code must never pass more than 32 bytes */
|
|
#define SPI_BUFSIZ max(32, SMP_CACHE_BYTES)
|
|
|
|
static u8 *buf;
|
|
|
|
/**
|
|
* spi_write_then_read - SPI synchronous write followed by read
|
|
* @spi: device with which data will be exchanged
|
|
* @txbuf: data to be written (need not be dma-safe)
|
|
* @n_tx: size of txbuf, in bytes
|
|
* @rxbuf: buffer into which data will be read (need not be dma-safe)
|
|
* @n_rx: size of rxbuf, in bytes
|
|
* Context: can sleep
|
|
*
|
|
* This performs a half duplex MicroWire style transaction with the
|
|
* device, sending txbuf and then reading rxbuf. The return value
|
|
* is zero for success, else a negative errno status code.
|
|
* This call may only be used from a context that may sleep.
|
|
*
|
|
* Parameters to this routine are always copied using a small buffer;
|
|
* portable code should never use this for more than 32 bytes.
|
|
* Performance-sensitive or bulk transfer code should instead use
|
|
* spi_{async,sync}() calls with dma-safe buffers.
|
|
*
|
|
* Return: zero on success, else a negative error code.
|
|
*/
|
|
int spi_write_then_read(struct spi_device *spi,
|
|
const void *txbuf, unsigned n_tx,
|
|
void *rxbuf, unsigned n_rx)
|
|
{
|
|
static DEFINE_MUTEX(lock);
|
|
|
|
int status;
|
|
struct spi_message message;
|
|
struct spi_transfer x[2];
|
|
u8 *local_buf;
|
|
|
|
/* Use preallocated DMA-safe buffer if we can. We can't avoid
|
|
* copying here, (as a pure convenience thing), but we can
|
|
* keep heap costs out of the hot path unless someone else is
|
|
* using the pre-allocated buffer or the transfer is too large.
|
|
*/
|
|
if ((n_tx + n_rx) > SPI_BUFSIZ || !mutex_trylock(&lock)) {
|
|
local_buf = kmalloc(max((unsigned)SPI_BUFSIZ, n_tx + n_rx),
|
|
GFP_KERNEL | GFP_DMA);
|
|
if (!local_buf)
|
|
return -ENOMEM;
|
|
} else {
|
|
local_buf = buf;
|
|
}
|
|
|
|
spi_message_init(&message);
|
|
memset(x, 0, sizeof(x));
|
|
if (n_tx) {
|
|
x[0].len = n_tx;
|
|
spi_message_add_tail(&x[0], &message);
|
|
}
|
|
if (n_rx) {
|
|
x[1].len = n_rx;
|
|
spi_message_add_tail(&x[1], &message);
|
|
}
|
|
|
|
memcpy(local_buf, txbuf, n_tx);
|
|
x[0].tx_buf = local_buf;
|
|
x[1].rx_buf = local_buf + n_tx;
|
|
|
|
/* do the i/o */
|
|
status = spi_sync(spi, &message);
|
|
if (status == 0)
|
|
memcpy(rxbuf, x[1].rx_buf, n_rx);
|
|
|
|
if (x[0].tx_buf == buf)
|
|
mutex_unlock(&lock);
|
|
else
|
|
kfree(local_buf);
|
|
|
|
return status;
|
|
}
|
|
EXPORT_SYMBOL_GPL(spi_write_then_read);
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
#if IS_ENABLED(CONFIG_OF_DYNAMIC)
|
|
static int __spi_of_device_match(struct device *dev, void *data)
|
|
{
|
|
return dev->of_node == data;
|
|
}
|
|
|
|
/* must call put_device() when done with returned spi_device device */
|
|
static struct spi_device *of_find_spi_device_by_node(struct device_node *node)
|
|
{
|
|
struct device *dev = bus_find_device(&spi_bus_type, NULL, node,
|
|
__spi_of_device_match);
|
|
return dev ? to_spi_device(dev) : NULL;
|
|
}
|
|
|
|
static int __spi_of_master_match(struct device *dev, const void *data)
|
|
{
|
|
return dev->of_node == data;
|
|
}
|
|
|
|
/* the spi masters are not using spi_bus, so we find it with another way */
|
|
static struct spi_master *of_find_spi_master_by_node(struct device_node *node)
|
|
{
|
|
struct device *dev;
|
|
|
|
dev = class_find_device(&spi_master_class, NULL, node,
|
|
__spi_of_master_match);
|
|
if (!dev)
|
|
return NULL;
|
|
|
|
/* reference got in class_find_device */
|
|
return container_of(dev, struct spi_master, dev);
|
|
}
|
|
|
|
static int of_spi_notify(struct notifier_block *nb, unsigned long action,
|
|
void *arg)
|
|
{
|
|
struct of_reconfig_data *rd = arg;
|
|
struct spi_master *master;
|
|
struct spi_device *spi;
|
|
|
|
switch (of_reconfig_get_state_change(action, arg)) {
|
|
case OF_RECONFIG_CHANGE_ADD:
|
|
master = of_find_spi_master_by_node(rd->dn->parent);
|
|
if (master == NULL)
|
|
return NOTIFY_OK; /* not for us */
|
|
|
|
if (of_node_test_and_set_flag(rd->dn, OF_POPULATED)) {
|
|
put_device(&master->dev);
|
|
return NOTIFY_OK;
|
|
}
|
|
|
|
spi = of_register_spi_device(master, rd->dn);
|
|
put_device(&master->dev);
|
|
|
|
if (IS_ERR(spi)) {
|
|
pr_err("%s: failed to create for '%s'\n",
|
|
__func__, rd->dn->full_name);
|
|
return notifier_from_errno(PTR_ERR(spi));
|
|
}
|
|
break;
|
|
|
|
case OF_RECONFIG_CHANGE_REMOVE:
|
|
/* already depopulated? */
|
|
if (!of_node_check_flag(rd->dn, OF_POPULATED))
|
|
return NOTIFY_OK;
|
|
|
|
/* find our device by node */
|
|
spi = of_find_spi_device_by_node(rd->dn);
|
|
if (spi == NULL)
|
|
return NOTIFY_OK; /* no? not meant for us */
|
|
|
|
/* unregister takes one ref away */
|
|
spi_unregister_device(spi);
|
|
|
|
/* and put the reference of the find */
|
|
put_device(&spi->dev);
|
|
break;
|
|
}
|
|
|
|
return NOTIFY_OK;
|
|
}
|
|
|
|
static struct notifier_block spi_of_notifier = {
|
|
.notifier_call = of_spi_notify,
|
|
};
|
|
#else /* IS_ENABLED(CONFIG_OF_DYNAMIC) */
|
|
extern struct notifier_block spi_of_notifier;
|
|
#endif /* IS_ENABLED(CONFIG_OF_DYNAMIC) */
|
|
|
|
#if IS_ENABLED(CONFIG_ACPI)
|
|
static int spi_acpi_master_match(struct device *dev, const void *data)
|
|
{
|
|
return ACPI_COMPANION(dev->parent) == data;
|
|
}
|
|
|
|
static int spi_acpi_device_match(struct device *dev, void *data)
|
|
{
|
|
return ACPI_COMPANION(dev) == data;
|
|
}
|
|
|
|
static struct spi_master *acpi_spi_find_master_by_adev(struct acpi_device *adev)
|
|
{
|
|
struct device *dev;
|
|
|
|
dev = class_find_device(&spi_master_class, NULL, adev,
|
|
spi_acpi_master_match);
|
|
if (!dev)
|
|
return NULL;
|
|
|
|
return container_of(dev, struct spi_master, dev);
|
|
}
|
|
|
|
static struct spi_device *acpi_spi_find_device_by_adev(struct acpi_device *adev)
|
|
{
|
|
struct device *dev;
|
|
|
|
dev = bus_find_device(&spi_bus_type, NULL, adev, spi_acpi_device_match);
|
|
|
|
return dev ? to_spi_device(dev) : NULL;
|
|
}
|
|
|
|
static int acpi_spi_notify(struct notifier_block *nb, unsigned long value,
|
|
void *arg)
|
|
{
|
|
struct acpi_device *adev = arg;
|
|
struct spi_master *master;
|
|
struct spi_device *spi;
|
|
|
|
switch (value) {
|
|
case ACPI_RECONFIG_DEVICE_ADD:
|
|
master = acpi_spi_find_master_by_adev(adev->parent);
|
|
if (!master)
|
|
break;
|
|
|
|
acpi_register_spi_device(master, adev);
|
|
put_device(&master->dev);
|
|
break;
|
|
case ACPI_RECONFIG_DEVICE_REMOVE:
|
|
if (!acpi_device_enumerated(adev))
|
|
break;
|
|
|
|
spi = acpi_spi_find_device_by_adev(adev);
|
|
if (!spi)
|
|
break;
|
|
|
|
spi_unregister_device(spi);
|
|
put_device(&spi->dev);
|
|
break;
|
|
}
|
|
|
|
return NOTIFY_OK;
|
|
}
|
|
|
|
static struct notifier_block spi_acpi_notifier = {
|
|
.notifier_call = acpi_spi_notify,
|
|
};
|
|
#else
|
|
extern struct notifier_block spi_acpi_notifier;
|
|
#endif
|
|
|
|
static int __init spi_init(void)
|
|
{
|
|
int status;
|
|
|
|
buf = kmalloc(SPI_BUFSIZ, GFP_KERNEL);
|
|
if (!buf) {
|
|
status = -ENOMEM;
|
|
goto err0;
|
|
}
|
|
|
|
status = bus_register(&spi_bus_type);
|
|
if (status < 0)
|
|
goto err1;
|
|
|
|
status = class_register(&spi_master_class);
|
|
if (status < 0)
|
|
goto err2;
|
|
|
|
if (IS_ENABLED(CONFIG_OF_DYNAMIC))
|
|
WARN_ON(of_reconfig_notifier_register(&spi_of_notifier));
|
|
if (IS_ENABLED(CONFIG_ACPI))
|
|
WARN_ON(acpi_reconfig_notifier_register(&spi_acpi_notifier));
|
|
|
|
return 0;
|
|
|
|
err2:
|
|
bus_unregister(&spi_bus_type);
|
|
err1:
|
|
kfree(buf);
|
|
buf = NULL;
|
|
err0:
|
|
return status;
|
|
}
|
|
|
|
/* board_info is normally registered in arch_initcall(),
|
|
* but even essential drivers wait till later
|
|
*
|
|
* REVISIT only boardinfo really needs static linking. the rest (device and
|
|
* driver registration) _could_ be dynamically linked (modular) ... costs
|
|
* include needing to have boardinfo data structures be much more public.
|
|
*/
|
|
postcore_initcall(spi_init);
|
|
|