linux/drivers/misc/isl29020.c
Uwe Kleine-König ed5c2f5fd1 i2c: Make remove callback return void
The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)

So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.

Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5
Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio
Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-16 12:46:26 +02:00

228 lines
5.0 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* isl29020.c - Intersil ALS Driver
*
* Copyright (C) 2008 Intel Corp
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
* Data sheet at: http://www.intersil.com/data/fn/fn6505.pdf
*/
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/err.h>
#include <linux/delay.h>
#include <linux/sysfs.h>
#include <linux/pm_runtime.h>
static DEFINE_MUTEX(mutex);
static ssize_t als_sensing_range_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct i2c_client *client = to_i2c_client(dev);
int val;
val = i2c_smbus_read_byte_data(client, 0x00);
if (val < 0)
return val;
return sprintf(buf, "%d000\n", 1 << (2 * (val & 3)));
}
static ssize_t als_lux_input_data_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct i2c_client *client = to_i2c_client(dev);
int ret_val, val;
unsigned long int lux;
int temp;
pm_runtime_get_sync(dev);
msleep(100);
mutex_lock(&mutex);
temp = i2c_smbus_read_byte_data(client, 0x02); /* MSB data */
if (temp < 0) {
pm_runtime_put_sync(dev);
mutex_unlock(&mutex);
return temp;
}
ret_val = i2c_smbus_read_byte_data(client, 0x01); /* LSB data */
mutex_unlock(&mutex);
if (ret_val < 0) {
pm_runtime_put_sync(dev);
return ret_val;
}
ret_val |= temp << 8;
val = i2c_smbus_read_byte_data(client, 0x00);
pm_runtime_put_sync(dev);
if (val < 0)
return val;
lux = ((((1 << (2 * (val & 3))))*1000) * ret_val) / 65536;
return sprintf(buf, "%ld\n", lux);
}
static ssize_t als_sensing_range_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
int ret_val;
unsigned long val;
ret_val = kstrtoul(buf, 10, &val);
if (ret_val)
return ret_val;
if (val < 1 || val > 64000)
return -EINVAL;
/* Pick the smallest sensor range that will meet our requirements */
if (val <= 1000)
val = 1;
else if (val <= 4000)
val = 2;
else if (val <= 16000)
val = 3;
else
val = 4;
ret_val = i2c_smbus_read_byte_data(client, 0x00);
if (ret_val < 0)
return ret_val;
ret_val &= 0xFC; /*reset the bit before setting them */
ret_val |= val - 1;
ret_val = i2c_smbus_write_byte_data(client, 0x00, ret_val);
if (ret_val < 0)
return ret_val;
return count;
}
static void als_set_power_state(struct i2c_client *client, int enable)
{
int ret_val;
ret_val = i2c_smbus_read_byte_data(client, 0x00);
if (ret_val < 0)
return;
if (enable)
ret_val |= 0x80;
else
ret_val &= 0x7F;
i2c_smbus_write_byte_data(client, 0x00, ret_val);
}
static DEVICE_ATTR(lux0_sensor_range, S_IRUGO | S_IWUSR,
als_sensing_range_show, als_sensing_range_store);
static DEVICE_ATTR(lux0_input, S_IRUGO, als_lux_input_data_show, NULL);
static struct attribute *mid_att_als[] = {
&dev_attr_lux0_sensor_range.attr,
&dev_attr_lux0_input.attr,
NULL
};
static const struct attribute_group m_als_gr = {
.name = "isl29020",
.attrs = mid_att_als
};
static int als_set_default_config(struct i2c_client *client)
{
int retval;
retval = i2c_smbus_write_byte_data(client, 0x00, 0xc0);
if (retval < 0) {
dev_err(&client->dev, "default write failed.");
return retval;
}
return 0;
}
static int isl29020_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int res;
res = als_set_default_config(client);
if (res < 0)
return res;
res = sysfs_create_group(&client->dev.kobj, &m_als_gr);
if (res) {
dev_err(&client->dev, "isl29020: device create file failed\n");
return res;
}
dev_info(&client->dev, "%s isl29020: ALS chip found\n", client->name);
als_set_power_state(client, 0);
pm_runtime_enable(&client->dev);
return res;
}
static void isl29020_remove(struct i2c_client *client)
{
pm_runtime_disable(&client->dev);
sysfs_remove_group(&client->dev.kobj, &m_als_gr);
}
static const struct i2c_device_id isl29020_id[] = {
{ "isl29020", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, isl29020_id);
#ifdef CONFIG_PM
static int isl29020_runtime_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
als_set_power_state(client, 0);
return 0;
}
static int isl29020_runtime_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
als_set_power_state(client, 1);
return 0;
}
static const struct dev_pm_ops isl29020_pm_ops = {
.runtime_suspend = isl29020_runtime_suspend,
.runtime_resume = isl29020_runtime_resume,
};
#define ISL29020_PM_OPS (&isl29020_pm_ops)
#else /* CONFIG_PM */
#define ISL29020_PM_OPS NULL
#endif /* CONFIG_PM */
static struct i2c_driver isl29020_driver = {
.driver = {
.name = "isl29020",
.pm = ISL29020_PM_OPS,
},
.probe = isl29020_probe,
.remove = isl29020_remove,
.id_table = isl29020_id,
};
module_i2c_driver(isl29020_driver);
MODULE_AUTHOR("Kalhan Trisal <kalhan.trisal@intel.com>");
MODULE_DESCRIPTION("Intersil isl29020 ALS Driver");
MODULE_LICENSE("GPL v2");