forked from Minki/linux
89693016e3
This patch enables the selection of samsung pm related stuffs when SAMSUNG_PM config is enabled and not just when generic PM config is enabled. Power management for s3c64XX and s3c24XX is enabled by default and for other platform depends on S5P_PM. This patch also fixes the following compilation error's when compiling a platform like exynos5440 which does not select pm stuffs. arch/arm/mach-exynos/built-in.o: In function '__virt_to_phys': linux/arch/arm/include/asm/memory.h:175: undefined reference to 's3c_cpu_resume' linux/arch/arm/include/asm/memory.h:175: undefined reference to 's3c_cpu_resume' linux/arch/arm/include/asm/memory.h:175: undefined reference to 's3c_cpu_resume' linux/arch/arm/include/asm/memory.h:175: undefined reference to 's3c_cpu_resume' arch/arm/mach-exynos/built-in.o: In function 'exynos5_init_irq': linux/arch/arm/mach-exynos/common.c:492: undefined reference to 's3c_irq_wake' linux/arch/arm/mach-exynos/common.c:492: undefined reference to 's3c_irq_wake' arch/arm/mach-exynos/built-in.o: In function 'exynos4_init_irq': linux/arch/arm/mach-exynos/common.c:476: undefined reference to 's3c_irq_wake' linux/arch/arm/mach-exynos/common.c:476: undefined reference to 's3c_irq_wake' arch/arm/plat-samsung/built-in.o: In function 's3c_irqext_wake': linux/arch/arm/plat-samsung/pm.c:144: undefined reference to 's3c_irqwake_eintallow' linux/arch/arm/plat-samsung/pm.c:144: undefined reference to 's3c_irqwake_eintallow' arch/arm/plat-samsung/built-in.o: In function 's3c_pm_enter': linux/arch/arm/plat-samsung/pm.c:263: undefined reference to 's3c_irqwake_intallow' linux/arch/arm/plat-samsung/pm.c:263: undefined reference to 's3c_irqwake_intallow' linux/arch/arm/plat-samsung/pm.c:264: undefined reference to 's3c_irqwake_eintallow' linux/arch/arm/plat-samsung/pm.c:264: undefined reference to 's3c_irqwake_eintallow' linux/arch/arm/plat-samsung/pm.c:275: undefined reference to 's3c_pm_save_core' linux/arch/arm/plat-samsung/pm.c:279: undefined reference to 's3c_pm_configure_extint' linux/arch/arm/plat-samsung/pm.c:310: undefined reference to 's3c_pm_restore_core' make: *** [vmlinux] Error 1 Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
227 lines
5.5 KiB
C
227 lines
5.5 KiB
C
/* linux/arch/arm/mach-exynos4/cpuidle.c
|
|
*
|
|
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/cpuidle.h>
|
|
#include <linux/cpu_pm.h>
|
|
#include <linux/io.h>
|
|
#include <linux/export.h>
|
|
#include <linux/time.h>
|
|
|
|
#include <asm/proc-fns.h>
|
|
#include <asm/smp_scu.h>
|
|
#include <asm/suspend.h>
|
|
#include <asm/unified.h>
|
|
#include <asm/cpuidle.h>
|
|
#include <mach/regs-clock.h>
|
|
#include <mach/regs-pmu.h>
|
|
|
|
#include <plat/cpu.h>
|
|
#include <plat/pm.h>
|
|
|
|
#include "common.h"
|
|
|
|
#define REG_DIRECTGO_ADDR (samsung_rev() == EXYNOS4210_REV_1_1 ? \
|
|
S5P_INFORM7 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
|
|
(S5P_VA_SYSRAM + 0x24) : S5P_INFORM0))
|
|
#define REG_DIRECTGO_FLAG (samsung_rev() == EXYNOS4210_REV_1_1 ? \
|
|
S5P_INFORM6 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
|
|
(S5P_VA_SYSRAM + 0x20) : S5P_INFORM1))
|
|
|
|
#define S5P_CHECK_AFTR 0xFCBA0D10
|
|
|
|
static int exynos4_enter_lowpower(struct cpuidle_device *dev,
|
|
struct cpuidle_driver *drv,
|
|
int index);
|
|
|
|
static DEFINE_PER_CPU(struct cpuidle_device, exynos4_cpuidle_device);
|
|
|
|
static struct cpuidle_driver exynos4_idle_driver = {
|
|
.name = "exynos4_idle",
|
|
.owner = THIS_MODULE,
|
|
.states = {
|
|
[0] = ARM_CPUIDLE_WFI_STATE,
|
|
[1] = {
|
|
.enter = exynos4_enter_lowpower,
|
|
.exit_latency = 300,
|
|
.target_residency = 100000,
|
|
.flags = CPUIDLE_FLAG_TIME_VALID,
|
|
.name = "C1",
|
|
.desc = "ARM power down",
|
|
},
|
|
},
|
|
.state_count = 2,
|
|
.safe_state_index = 0,
|
|
};
|
|
|
|
/* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */
|
|
static void exynos4_set_wakeupmask(void)
|
|
{
|
|
__raw_writel(0x0000ff3e, S5P_WAKEUP_MASK);
|
|
}
|
|
|
|
static unsigned int g_pwr_ctrl, g_diag_reg;
|
|
|
|
static void save_cpu_arch_register(void)
|
|
{
|
|
/*read power control register*/
|
|
asm("mrc p15, 0, %0, c15, c0, 0" : "=r"(g_pwr_ctrl) : : "cc");
|
|
/*read diagnostic register*/
|
|
asm("mrc p15, 0, %0, c15, c0, 1" : "=r"(g_diag_reg) : : "cc");
|
|
return;
|
|
}
|
|
|
|
static void restore_cpu_arch_register(void)
|
|
{
|
|
/*write power control register*/
|
|
asm("mcr p15, 0, %0, c15, c0, 0" : : "r"(g_pwr_ctrl) : "cc");
|
|
/*write diagnostic register*/
|
|
asm("mcr p15, 0, %0, c15, c0, 1" : : "r"(g_diag_reg) : "cc");
|
|
return;
|
|
}
|
|
|
|
static int idle_finisher(unsigned long flags)
|
|
{
|
|
cpu_do_idle();
|
|
return 1;
|
|
}
|
|
|
|
static int exynos4_enter_core0_aftr(struct cpuidle_device *dev,
|
|
struct cpuidle_driver *drv,
|
|
int index)
|
|
{
|
|
unsigned long tmp;
|
|
|
|
exynos4_set_wakeupmask();
|
|
|
|
/* Set value of power down register for aftr mode */
|
|
exynos_sys_powerdown_conf(SYS_AFTR);
|
|
|
|
__raw_writel(virt_to_phys(s3c_cpu_resume), REG_DIRECTGO_ADDR);
|
|
__raw_writel(S5P_CHECK_AFTR, REG_DIRECTGO_FLAG);
|
|
|
|
save_cpu_arch_register();
|
|
|
|
/* Setting Central Sequence Register for power down mode */
|
|
tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
|
|
tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
|
|
__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
|
|
|
|
cpu_pm_enter();
|
|
cpu_suspend(0, idle_finisher);
|
|
|
|
#ifdef CONFIG_SMP
|
|
if (!soc_is_exynos5250())
|
|
scu_enable(S5P_VA_SCU);
|
|
#endif
|
|
cpu_pm_exit();
|
|
|
|
restore_cpu_arch_register();
|
|
|
|
/*
|
|
* If PMU failed while entering sleep mode, WFI will be
|
|
* ignored by PMU and then exiting cpu_do_idle().
|
|
* S5P_CENTRAL_LOWPWR_CFG bit will not be set automatically
|
|
* in this situation.
|
|
*/
|
|
tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
|
|
if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) {
|
|
tmp |= S5P_CENTRAL_LOWPWR_CFG;
|
|
__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
|
|
}
|
|
|
|
/* Clear wakeup state register */
|
|
__raw_writel(0x0, S5P_WAKEUP_STAT);
|
|
|
|
return index;
|
|
}
|
|
|
|
static int exynos4_enter_lowpower(struct cpuidle_device *dev,
|
|
struct cpuidle_driver *drv,
|
|
int index)
|
|
{
|
|
int new_index = index;
|
|
|
|
/* This mode only can be entered when other core's are offline */
|
|
if (num_online_cpus() > 1)
|
|
new_index = drv->safe_state_index;
|
|
|
|
if (new_index == 0)
|
|
return arm_cpuidle_simple_enter(dev, drv, new_index);
|
|
else
|
|
return exynos4_enter_core0_aftr(dev, drv, new_index);
|
|
}
|
|
|
|
static void __init exynos5_core_down_clk(void)
|
|
{
|
|
unsigned int tmp;
|
|
|
|
/*
|
|
* Enable arm clock down (in idle) and set arm divider
|
|
* ratios in WFI/WFE state.
|
|
*/
|
|
tmp = PWR_CTRL1_CORE2_DOWN_RATIO | \
|
|
PWR_CTRL1_CORE1_DOWN_RATIO | \
|
|
PWR_CTRL1_DIV2_DOWN_EN | \
|
|
PWR_CTRL1_DIV1_DOWN_EN | \
|
|
PWR_CTRL1_USE_CORE1_WFE | \
|
|
PWR_CTRL1_USE_CORE0_WFE | \
|
|
PWR_CTRL1_USE_CORE1_WFI | \
|
|
PWR_CTRL1_USE_CORE0_WFI;
|
|
__raw_writel(tmp, EXYNOS5_PWR_CTRL1);
|
|
|
|
/*
|
|
* Enable arm clock up (on exiting idle). Set arm divider
|
|
* ratios when not in idle along with the standby duration
|
|
* ratios.
|
|
*/
|
|
tmp = PWR_CTRL2_DIV2_UP_EN | \
|
|
PWR_CTRL2_DIV1_UP_EN | \
|
|
PWR_CTRL2_DUR_STANDBY2_VAL | \
|
|
PWR_CTRL2_DUR_STANDBY1_VAL | \
|
|
PWR_CTRL2_CORE2_UP_RATIO | \
|
|
PWR_CTRL2_CORE1_UP_RATIO;
|
|
__raw_writel(tmp, EXYNOS5_PWR_CTRL2);
|
|
}
|
|
|
|
static int __init exynos4_init_cpuidle(void)
|
|
{
|
|
int cpu_id, ret;
|
|
struct cpuidle_device *device;
|
|
|
|
if (soc_is_exynos5250())
|
|
exynos5_core_down_clk();
|
|
|
|
ret = cpuidle_register_driver(&exynos4_idle_driver);
|
|
if (ret) {
|
|
printk(KERN_ERR "CPUidle failed to register driver\n");
|
|
return ret;
|
|
}
|
|
|
|
for_each_online_cpu(cpu_id) {
|
|
device = &per_cpu(exynos4_cpuidle_device, cpu_id);
|
|
device->cpu = cpu_id;
|
|
|
|
/* Support IDLE only */
|
|
if (cpu_id != 0)
|
|
device->state_count = 1;
|
|
|
|
ret = cpuidle_register_device(device);
|
|
if (ret) {
|
|
printk(KERN_ERR "CPUidle register device failed\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
device_initcall(exynos4_init_cpuidle);
|