forked from Minki/linux
39e6c8208d
While playing with mlx4 hardware timestamping of RX packets, I found that some packets were received by TCP stack with a ~200 ms delay... Since the timestamp was provided by the NIC, and my probe was added in tcp_v4_rcv() while in BH handler, I was confident it was not a sender issue, or a drop in the network. This would happen with a very low probability, but hurting RPC workloads. A NAPI driver normally arms the IRQ after the napi_complete_done(), after NAPI_STATE_SCHED is cleared, so that the hard irq handler can grab it. Problem is that if another point in the stack grabs NAPI_STATE_SCHED bit while IRQ are not disabled, we might have later an IRQ firing and finding this bit set, right before napi_complete_done() clears it. This can happen with busy polling users, or if gro_flush_timeout is used. But some other uses of napi_schedule() in drivers can cause this as well. thread 1 thread 2 (could be on same cpu, or not) // busy polling or napi_watchdog() napi_schedule(); ... napi->poll() device polling: read 2 packets from ring buffer Additional 3rd packet is available. device hard irq // does nothing because NAPI_STATE_SCHED bit is owned by thread 1 napi_schedule(); napi_complete_done(napi, 2); rearm_irq(); Note that rearm_irq() will not force the device to send an additional IRQ for the packet it already signaled (3rd packet in my example) This patch adds a new NAPI_STATE_MISSED bit, that napi_schedule_prep() can set if it could not grab NAPI_STATE_SCHED Then napi_complete_done() properly reschedules the napi to make sure we do not miss something. Since we manipulate multiple bits at once, use cmpxchg() like in sk_busy_loop() to provide proper transactions. In v2, I changed napi_watchdog() to use a relaxed variant of napi_schedule_prep() : No need to set NAPI_STATE_MISSED from this point. In v3, I added more details in the changelog and clears NAPI_STATE_MISSED in busy_poll_stop() In v4, I added the ideas given by Alexander Duyck in v3 review Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
---|---|---|
.. | ||
6lowpan | ||
9p | ||
802 | ||
8021q | ||
appletalk | ||
atm | ||
ax25 | ||
batman-adv | ||
bluetooth | ||
bridge | ||
caif | ||
can | ||
ceph | ||
core | ||
dcb | ||
dccp | ||
decnet | ||
dns_resolver | ||
dsa | ||
ethernet | ||
hsr | ||
ieee802154 | ||
ife | ||
ipv4 | ||
ipv6 | ||
ipx | ||
irda | ||
iucv | ||
kcm | ||
key | ||
l2tp | ||
l3mdev | ||
lapb | ||
llc | ||
mac80211 | ||
mac802154 | ||
mpls | ||
ncsi | ||
netfilter | ||
netlabel | ||
netlink | ||
netrom | ||
nfc | ||
openvswitch | ||
packet | ||
phonet | ||
psample | ||
qrtr | ||
rds | ||
rfkill | ||
rose | ||
rxrpc | ||
sched | ||
sctp | ||
smc | ||
strparser | ||
sunrpc | ||
switchdev | ||
tipc | ||
unix | ||
vmw_vsock | ||
wimax | ||
wireless | ||
x25 | ||
xfrm | ||
compat.c | ||
Kconfig | ||
Makefile | ||
socket.c | ||
sysctl_net.c |