leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
394053f4a4
linux/scripts
History
Masahiro Yamada 394053f4a4 kbuild: make single targets work more correctly 
Currently, the single target build directly descends into the directory
of the target. For example,

  $ make foo/bar/baz.o

... directly descends into foo/bar/.

On the other hand, the normal build usually descends one directory at
a time, i.e. descends into foo/, and then foo/bar/.

This difference causes some problems.

[1] miss subdir-asflags-y, subdir-ccflags-y in upper Makefiles

    The options in subdir-{as,cc}flags-y take effect in the current
    and its sub-directories. In other words, they are inherited
    downward. In the example above, the single target will miss
    subdir-{as,cc}flags-y if they are defined in foo/Makefile.

[2] could be built in a different directory

    As Documentation/kbuild/modules.rst section 4.3 says, Kbuild can
    handle files that are spread over several sub-directories.

    The build rule of foo/bar/baz.o may not necessarily be specified in
    foo/bar/Makefile. It might be specifies in foo/Makefile as follows:

    [foo/Makefile]
    obj-y := bar/baz.o

    This often happens when a module is so big that its source files
    are divided into sub-directories.

    In this case, there is no Makefile in the foo/bar/ directory, yet
    the single target descends into foo/bar/, then fails due to the
    missing Makefile. You can still do 'make foo/bar/' for partial
    building, but cannot do 'make foo/bar/baz.s'. I believe the single
    target '%.s' is a useful feature for inspecting the compiler output.

    Some modules work around this issue by putting an empty Makefile
    in every sub-directory.

This commit fixes those problems by making the single target build
descend in the same way as the normal build does.

Another change is the single target build will observe the CONFIG
options. Previously, it allowed users to build the foo.o even when
the corresponding CONFIG_FOO is disabled:

   obj-$(CONFIG_FOO) += foo.o

In the new behavior, the single target build will just fail and show
"No rule to make target ..." (or "Nothing to be done for ..." if the
stale object already exists, but cannot be updated).

The disadvantage of this commit is the build speed. Now that the
single target build visits every directory and parses lots of
Makefiles, it is slower than before. (But, I hope it will not be
too slow.)

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-08-21 21:05:21 +09:00
..
atomic locking/atomics: Use sed(1) instead of non-standard head(1) option 2019-06-25 10:17:07 +02:00
basic fixdep: check return value of printf() and putchar() 2019-07-01 10:30:39 +09:00
coccinelle Kbuild updates for v5.3 (2nd) 2019-07-20 09:34:55 -07:00
dtc Devicetree updates for v5.3: 2019-07-11 18:35:30 -07:00
gcc-plugins docs: move gcc_plugins.txt to core-api and rename to .rst 2019-07-15 09:20:27 -03:00
gdb scripts/gdb: add helpers to find and list devices 2019-07-16 19:23:24 -07:00
genksyms kbuild: make bison create C file and header in a single pattern rule 2019-08-14 01:10:42 +09:00
kconfig kconfig: Clear "written" flag to avoid data loss 2019-08-04 12:44:15 +09:00
ksymoops
mod modpost: check for static EXPORT_SYMBOL* functions 2019-08-14 01:10:18 +09:00
package kbuild: create *.mod with full directory path and remove MODVERDIR 2019-07-18 02:19:31 +09:00
selinux treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156 2019-05-30 11:26:35 -07:00
tracing treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 166 2019-05-30 11:26:39 -07:00
.gitignore scripts: remove unnecessary ihex2fw and check-lc_ctypes from .gitignore 2018-12-22 00:37:52 +09:00
adjust_autoksyms.sh kbuild: remove the first line of *.mod files 2019-07-18 02:19:31 +09:00
asn1_compiler.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 36 2019-05-24 17:27:11 +02:00
bin2c.c kbuild: move bin2c back to scripts/ from scripts/basic/ 2018-07-18 01:18:05 +09:00
bloat-o-meter bloat-o-meter: ignore __addressable_ symbols 2018-12-28 12:11:44 -08:00
bootgraph.pl treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 391 2019-06-05 17:37:11 +02:00
bpf_helpers_doc.py bpf: fix script for generating man page on BPF helpers 2019-05-13 01:12:45 +02:00
cc-can-link.sh bpfilter: check compiler capability in Kconfig 2018-06-28 13:36:39 +09:00
check_extable.sh
checkincludes.pl
checkkconfigsymbols.py treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 166 2019-05-30 11:26:39 -07:00
checkpatch.pl checkpatch.pl: warn on duplicate sysctl local variable 2019-07-16 19:23:22 -07:00
checkstack.pl scripts/checkstack.pl: Fix arm64 wrong or unknown architecture 2019-06-05 02:33:10 +09:00
checksyscalls.sh checksyscalls: fix up mq_timedreceive and stat exceptions 2019-02-19 21:27:53 +01:00
checkversion.pl
clang-version.sh kbuild: update comment block of scripts/clang-version.sh 2019-03-04 22:34:54 +09:00
cleanfile
cleanpatch
coccicheck coccicheck: return proper error code on fail 2018-08-14 08:58:56 +09:00
config
conmakehash.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 54 2019-05-24 17:36:42 +02:00
const_structs.checkpatch
decode_stacktrace.sh scripts/decode_stacktrace: Accept dash/underscore in modules 2019-07-12 11:05:41 -07:00
decodecode scripts/decodecode: set ARCH when running natively on arm/arm64 2018-12-28 12:11:44 -08:00
depmod.sh kbuild: modules_install: warn when missing System.map file 2018-09-09 09:14:07 +09:00
diffconfig
documentation-file-ref-check scripts/documentation-file-ref-check: ignore output dir 2019-06-14 14:43:01 -06:00
export_report.pl kbuild: export_report: read modules.order instead of .tmp_versions/*.mod 2019-07-18 02:19:31 +09:00
extract_xc3028.pl treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 339 2019-06-05 17:37:07 +02:00
extract-cert.c
extract-ikconfig
extract-module-sig.pl
extract-sys-certs.pl
extract-vmlinux treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 378 2019-06-05 17:37:10 +02:00
faddr2line scripts/faddr2line: fix location of start_kernel in comment 2018-11-18 10:15:09 -08:00
file-size.sh kbuild: Use ls(1) instead of stat(1) to obtain file size 2018-03-26 02:01:24 +09:00
find-unused-docs.sh
gcc-goto.sh jump_label: move 'asm goto' support test to Kconfig 2019-01-06 09:46:51 +09:00
gcc-ld
gcc-plugin.sh
gcc-version.sh kbuild: clean up scripts/gcc-version.sh 2019-03-04 22:35:04 +09:00
gcc-x86_32-has-stack-protector.sh stack-protector: test compiler capability in Kconfig and drop AUTO mode 2018-06-08 18:56:00 +09:00
gcc-x86_64-has-stack-protector.sh stack-protector: Fix test with 32-bit userland and CONFIG_64BIT=y 2018-06-25 23:21:13 +09:00
gen_compile_commands.py gen_compile_commands: lower the entry count threshold 2019-07-27 12:18:19 +09:00
gen_ksymdeps.sh kbuild: simplify dependency generation for CONFIG_TRIM_UNUSED_KSYMS 2018-12-01 23:13:14 +09:00
get_abi.pl doc: ABI scripts: add a SPDX header file 2019-06-21 16:58:37 +02:00
get_dvb_firmware treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 61 2019-05-24 17:36:45 +02:00
get_maintainer.pl get_maintainer: add ability to skip moderated mailing lists 2019-07-16 19:23:22 -07:00
gfp-translate treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 166 2019-05-30 11:26:39 -07:00
headerdep.pl
headers_check.pl
headers_install.sh kbuild: re-implement detection of CONFIG options leaked to user-space 2019-08-21 21:05:21 +09:00
insert-sys-cert.c
kallsyms.c kallsyms: exclude kasan local symbols on s390 2019-07-08 02:25:59 +09:00
Kbuild.include kbuild: remove unused objectify macro 2019-07-27 12:18:19 +09:00
Kconfig.include kbuild: Fail if gold linker is detected 2019-08-14 01:10:42 +09:00
kernel-doc kernel-doc: Don't try to mark up function names 2019-06-26 11:14:15 -06:00
ld-version.sh
leaking_addresses.pl treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 166 2019-05-30 11:26:39 -07:00
Lindent
link-vmlinux.sh kbuild: Parameterize kallsyms generation and correct reporting 2019-08-21 21:05:21 +09:00
Makefile kbuild: remove build_unifdef target in scripts/Makefile 2019-06-15 19:57:01 +09:00
Makefile.asm-generic kbuild: force all architectures except um to include mandatory-y 2019-03-17 12:56:32 +09:00
Makefile.build kbuild: make single targets work more correctly 2019-08-21 21:05:21 +09:00
Makefile.clean kbuild: remove deprecated host-progs variable 2018-08-09 21:51:17 +09:00
Makefile.dtbinst
Makefile.extrawarn kbuild: Remove unnecessary -Wno-unused-value 2019-06-24 03:43:03 +09:00
Makefile.gcc-plugins gcc-plugins: structleak: Generalize to all variable types 2019-03-04 09:29:41 -08:00
Makefile.headersinst kbuild: fix 'No such file or directory' warning for headers_install 2019-06-24 03:43:03 +09:00
Makefile.host kbuild: move flex and bison rules to Makefile.host 2019-08-14 01:10:42 +09:00
Makefile.kasan kasan: remove use after scope bugs detection. 2019-03-05 21:07:13 -08:00
Makefile.kcov treewide: Add SPDX license identifier - Makefile/Kconfig 2019-05-21 10:50:46 +02:00
Makefile.lib kbuild: treat an object as multi-used when $(foo-) is set 2019-08-15 02:25:11 +09:00
Makefile.modbuiltin kbuild: get rid of kernel/ prefix from in-tree modules.{order,builtin} 2019-07-17 22:39:27 +09:00
Makefile.modinst kbuild: modinst: read modules.order instead of $(MODVERDIR)/*.mod 2019-07-17 22:39:27 +09:00
Makefile.modpost kbuild: add [M] marker for build log of *.mod.o 2019-08-14 01:10:42 +09:00
Makefile.modsign kbuild: modsign: read modules.order instead of $(MODVERDIR)/*.mod 2019-07-17 22:39:27 +09:00
Makefile.ubsan ubsan: Remove vla bound checks. 2019-05-06 11:12:09 -07:00
makelst
markup_oops.pl treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 373 2019-06-05 17:37:10 +02:00
mkcompile_h Kbuild: Handle PREEMPT_RT for version string and magic 2019-08-14 01:10:42 +09:00
mkmakefile kbuild: mkmakefile: generate a simple wrapper of top Makefile 2019-04-02 23:27:38 +09:00
mksysmap
mkuboot.sh
module-common.lds
modules-check.sh kbuild: get rid of kernel/ prefix from in-tree modules.{order,builtin} 2019-07-17 22:39:27 +09:00
namespace.pl kbuild: rename built-in.o to built-in.a 2018-03-26 02:01:19 +09:00
objdiff treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 199 2019-05-30 11:29:23 -07:00
parse-maintainers.pl
patch-kernel
pnmtologo.c
profile2linkerlist.pl
prune-kernel
recordmcount.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 378 2019-06-05 17:37:10 +02:00
recordmcount.h powerpc updates for 5.3 2019-07-13 16:08:36 -07:00
recordmcount.pl treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 166 2019-05-30 11:26:39 -07:00
setlocalversion scripts/setlocalversion: Improve -dirty check with git-status --no-optional-locks 2018-11-21 23:57:33 +09:00
show_delta treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 438 2019-06-05 17:37:17 +02:00
sign-file.c
sortextable.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 378 2019-06-05 17:37:10 +02:00
sortextable.h treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 378 2019-06-05 17:37:10 +02:00
spdxcheck-test.sh scripts: add spdxcheck.py self test 2018-12-28 12:11:44 -08:00
spdxcheck.py spdxcheck.py: fix directory structures 2019-06-01 15:51:31 -07:00
spelling.txt scripts/spelling.txt: add more spellings to spelling.txt 2019-07-12 11:05:41 -07:00
sphinx-pre-install scripts/sphinx-pre-install: seek for Noto CJK fonts for pdf output 2019-07-17 06:57:52 -03:00
split-man.pl MAINTAINERS & files: Canonize the e-mails I use at files 2018-05-04 06:21:06 -04:00
stackdelta
stackusage
subarch.include selftests: add headers_install to lib.mk 2018-09-05 08:12:09 -06:00
tags.sh kbuild: add a flag to force absolute path for srctree 2019-07-11 00:05:09 +09:00
unifdef.c unifdef: use memcpy instead of strncpy 2018-11-30 14:45:01 -08:00
ver_linux ver_linux: Assign constant RE to variable name for clarity 2019-01-22 13:34:35 +01:00
xen-hypercalls.sh
xz_wrap.sh