forked from Minki/linux
7c83a7c539
There are use cases for which the existing tagger, based on the NPI (Node Processor Interface) functionality, is insufficient. Namely: - Frames injected through the NPI port bypass the frame analyzer, so no source address learning is performed, no TSN stream classification, etc. - Flow control is not functional over an NPI port (PAUSE frames are encapsulated in the same Extraction Frame Header as all other frames) - There can be at most one NPI port configured for an Ocelot switch. But in NXP LS1028A and T1040 there are two Ethernet CPU ports. The non-NPI port is currently either disabled, or operated as a plain user port (albeit an internally-facing one). Having the ability to configure the two CPU ports symmetrically could pave the way for e.g. creating a LAG between them, to increase bandwidth seamlessly for the system. So there is a desire to have an alternative to the NPI mode. This change keeps the default tagger for the Seville and Felix switches as "ocelot", but it can be changed via the following device attribute: echo ocelot-8021q > /sys/class/<dsa-master>/dsa/tagging Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
164 lines
5.4 KiB
Plaintext
164 lines
5.4 KiB
Plaintext
# SPDX-License-Identifier: GPL-2.0-only
|
|
config HAVE_NET_DSA
|
|
def_bool y
|
|
depends on INET && NETDEVICES && !S390
|
|
|
|
# Drivers must select NET_DSA and the appropriate tagging format
|
|
|
|
menuconfig NET_DSA
|
|
tristate "Distributed Switch Architecture"
|
|
depends on HAVE_NET_DSA
|
|
depends on BRIDGE || BRIDGE=n
|
|
select GRO_CELLS
|
|
select NET_SWITCHDEV
|
|
select PHYLINK
|
|
select NET_DEVLINK
|
|
help
|
|
Say Y if you want to enable support for the hardware switches supported
|
|
by the Distributed Switch Architecture.
|
|
|
|
if NET_DSA
|
|
|
|
# tagging formats
|
|
config NET_DSA_TAG_8021Q
|
|
tristate
|
|
select VLAN_8021Q
|
|
help
|
|
Unlike the other tagging protocols, the 802.1Q config option simply
|
|
provides helpers for other tagging implementations that might rely on
|
|
VLAN in one way or another. It is not a complete solution.
|
|
|
|
Drivers which use these helpers should select this as dependency.
|
|
|
|
config NET_DSA_TAG_AR9331
|
|
tristate "Tag driver for Atheros AR9331 SoC with built-in switch"
|
|
help
|
|
Say Y or M if you want to enable support for tagging frames for
|
|
the Atheros AR9331 SoC with built-in switch.
|
|
|
|
config NET_DSA_TAG_BRCM_COMMON
|
|
tristate
|
|
default n
|
|
|
|
config NET_DSA_TAG_BRCM
|
|
tristate "Tag driver for Broadcom switches using in-frame headers"
|
|
select NET_DSA_TAG_BRCM_COMMON
|
|
help
|
|
Say Y if you want to enable support for tagging frames for the
|
|
Broadcom switches which place the tag after the MAC source address.
|
|
|
|
|
|
config NET_DSA_TAG_BRCM_PREPEND
|
|
tristate "Tag driver for Broadcom switches using prepended headers"
|
|
select NET_DSA_TAG_BRCM_COMMON
|
|
help
|
|
Say Y if you want to enable support for tagging frames for the
|
|
Broadcom switches which places the tag before the Ethernet header
|
|
(prepended).
|
|
|
|
config NET_DSA_TAG_HELLCREEK
|
|
tristate "Tag driver for Hirschmann Hellcreek TSN switches"
|
|
help
|
|
Say Y or M if you want to enable support for tagging frames
|
|
for the Hirschmann Hellcreek TSN switches.
|
|
|
|
config NET_DSA_TAG_GSWIP
|
|
tristate "Tag driver for Lantiq / Intel GSWIP switches"
|
|
help
|
|
Say Y or M if you want to enable support for tagging frames for the
|
|
Lantiq / Intel GSWIP switches.
|
|
|
|
config NET_DSA_TAG_DSA_COMMON
|
|
tristate
|
|
|
|
config NET_DSA_TAG_DSA
|
|
tristate "Tag driver for Marvell switches using DSA headers"
|
|
select NET_DSA_TAG_DSA_COMMON
|
|
help
|
|
Say Y or M if you want to enable support for tagging frames for the
|
|
Marvell switches which use DSA headers.
|
|
|
|
config NET_DSA_TAG_EDSA
|
|
tristate "Tag driver for Marvell switches using EtherType DSA headers"
|
|
select NET_DSA_TAG_DSA_COMMON
|
|
help
|
|
Say Y or M if you want to enable support for tagging frames for the
|
|
Marvell switches which use EtherType DSA headers.
|
|
|
|
config NET_DSA_TAG_MTK
|
|
tristate "Tag driver for Mediatek switches"
|
|
help
|
|
Say Y or M if you want to enable support for tagging frames for
|
|
Mediatek switches.
|
|
|
|
config NET_DSA_TAG_KSZ
|
|
tristate "Tag driver for Microchip 8795/9477/9893 families of switches"
|
|
help
|
|
Say Y if you want to enable support for tagging frames for the
|
|
Microchip 8795/9477/9893 families of switches.
|
|
|
|
config NET_DSA_TAG_RTL4_A
|
|
tristate "Tag driver for Realtek 4 byte protocol A tags"
|
|
help
|
|
Say Y or M if you want to enable support for tagging frames for the
|
|
Realtek switches with 4 byte protocol A tags, sich as found in
|
|
the Realtek RTL8366RB.
|
|
|
|
config NET_DSA_TAG_OCELOT
|
|
tristate "Tag driver for Ocelot family of switches, using NPI port"
|
|
select PACKING
|
|
help
|
|
Say Y or M if you want to enable NPI tagging for the Ocelot switches
|
|
(VSC7511, VSC7512, VSC7513, VSC7514, VSC9953, VSC9959). In this mode,
|
|
the frames over the Ethernet CPU port are prepended with a
|
|
hardware-defined injection/extraction frame header. Flow control
|
|
(PAUSE frames) over the CPU port is not supported when operating in
|
|
this mode.
|
|
|
|
config NET_DSA_TAG_OCELOT_8021Q
|
|
tristate "Tag driver for Ocelot family of switches, using VLAN"
|
|
select NET_DSA_TAG_8021Q
|
|
help
|
|
Say Y or M if you want to enable support for tagging frames with a
|
|
custom VLAN-based header. Frames that require timestamping, such as
|
|
PTP, are not delivered over Ethernet but over register-based MMIO.
|
|
Flow control over the CPU port is functional in this mode. When using
|
|
this mode, less TCAM resources (VCAP IS1, IS2, ES0) are available for
|
|
use with tc-flower.
|
|
|
|
config NET_DSA_TAG_QCA
|
|
tristate "Tag driver for Qualcomm Atheros QCA8K switches"
|
|
help
|
|
Say Y or M if you want to enable support for tagging frames for
|
|
the Qualcomm Atheros QCA8K switches.
|
|
|
|
config NET_DSA_TAG_LAN9303
|
|
tristate "Tag driver for SMSC/Microchip LAN9303 family of switches"
|
|
help
|
|
Say Y or M if you want to enable support for tagging frames for the
|
|
SMSC/Microchip LAN9303 family of switches.
|
|
|
|
config NET_DSA_TAG_SJA1105
|
|
tristate "Tag driver for NXP SJA1105 switches"
|
|
select NET_DSA_TAG_8021Q
|
|
select PACKING
|
|
help
|
|
Say Y or M if you want to enable support for tagging frames with the
|
|
NXP SJA1105 switch family. Both the native tagging protocol (which
|
|
is only for link-local traffic) as well as non-native tagging (based
|
|
on a custom 802.1Q VLAN header) are available.
|
|
|
|
config NET_DSA_TAG_TRAILER
|
|
tristate "Tag driver for switches using a trailer tag"
|
|
help
|
|
Say Y or M if you want to enable support for tagging frames at
|
|
with a trailed. e.g. Marvell 88E6060.
|
|
|
|
config NET_DSA_TAG_XRS700X
|
|
tristate "Tag driver for XRS700x switches"
|
|
help
|
|
Say Y or M if you want to enable support for tagging frames for
|
|
Arrow SpeedChips XRS700x switches that use a single byte tag trailer.
|
|
|
|
endif
|