forked from Minki/linux
4421db1c2b
The Firefly RK3288 Reload is a combination Firefly rk3288 core board with the Reload baseboard. Add a dtsi for the Firefly rk3288 core which can be included into the dts for the various baseboards in the future and dts for Reload base board. Currently supported are serial console, wired networking, eMMC and SD storage, SPFIF, IR receiver, LEDs, SDIO wifi and USB. But only the OTG could work on the host mode now, the other USB host can't work now, additional patches are required. Signed-off-by: Randy Li <ayaka@soulik.info> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
339 lines
8.0 KiB
Plaintext
339 lines
8.0 KiB
Plaintext
/*
|
|
* Device tree file for Firefly Rockchip RK3288 Core board
|
|
* Copyright (c) 2016 Randy Li <ayaka@soulik.info>
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
* License, or (at your option) any later version.
|
|
*
|
|
* This file is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* Or, alternatively,
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
#include "rk3288.dtsi"
|
|
|
|
/ {
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0 0x80000000>;
|
|
};
|
|
|
|
dovdd_1v8: dovdd-1v8-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "dovdd_1v8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
vin-supply = <&vcc28_dvp>;
|
|
};
|
|
|
|
ext_gmac: external-gmac-clock {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <125000000>;
|
|
clock-output-names = "ext_gmac";
|
|
};
|
|
|
|
vbat_wl: vcc_sys: vsys-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_sys";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vcc_flash: flash-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_flash";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
vin-supply = <&vcc_io>;
|
|
};
|
|
|
|
vcc_5v: usb-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_5v";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
vin-supply = <&vcc_sys>;
|
|
};
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu0-supply = <&vdd_cpu>;
|
|
};
|
|
|
|
&emmc {
|
|
bus-width = <8>;
|
|
cap-mmc-highspeed;
|
|
disable-wp;
|
|
mmc-ddr-1_8v;
|
|
mmc-hs200-1_8v;
|
|
non-removable;
|
|
num-slots = <1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
|
|
vmmc-supply = <&vcc_io>;
|
|
vqmmc-supply = <&vcc_flash>;
|
|
status = "okay";
|
|
};
|
|
|
|
&gmac {
|
|
assigned-clocks = <&cru SCLK_MAC>;
|
|
assigned-clock-parents = <&ext_gmac>;
|
|
clock_in_out = "input";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
|
|
phy-supply = <&vcc_lan>;
|
|
phy-mode = "rgmii";
|
|
snps,reset-active-low;
|
|
snps,reset-delays-us = <0 10000 1000000>;
|
|
snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
|
|
tx_delay = <0x30>;
|
|
rx_delay = <0x10>;
|
|
status = "ok";
|
|
};
|
|
|
|
&i2c0 {
|
|
clock-frequency = <400000>;
|
|
status = "okay";
|
|
|
|
vdd_cpu: syr827@40 {
|
|
compatible = "silergy,syr827";
|
|
fcs,suspend-voltage-selector = <1>;
|
|
reg = <0x40>;
|
|
regulator-name = "vdd_cpu";
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-enable-ramp-delay = <300>;
|
|
regulator-ramp-delay = <8000>;
|
|
vin-supply = <&vcc_sys>;
|
|
};
|
|
|
|
vdd_gpu: syr828@41 {
|
|
compatible = "silergy,syr828";
|
|
fcs,suspend-voltage-selector = <1>;
|
|
reg = <0x41>;
|
|
regulator-name = "vdd_gpu";
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
vin-supply = <&vcc_sys>;
|
|
};
|
|
|
|
act8846: act8846@5a {
|
|
compatible = "active-semi,act8846";
|
|
reg = <0x5a>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pmic_vsel>, <&pwr_hold>;
|
|
system-power-controller;
|
|
|
|
vp1-supply = <&vcc_sys>;
|
|
vp2-supply = <&vcc_sys>;
|
|
vp3-supply = <&vcc_sys>;
|
|
vp4-supply = <&vcc_sys>;
|
|
inl1-supply = <&vcc_sys>;
|
|
inl2-supply = <&vcc_sys>;
|
|
inl3-supply = <&vcc_20>;
|
|
|
|
regulators {
|
|
vcc_ddr: REG1 {
|
|
regulator-name = "vcc_ddr";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vcc_io: REG2 {
|
|
regulator-name = "vcc_io";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdd_log: REG3 {
|
|
regulator-name = "vdd_log";
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vcc_20: REG4 {
|
|
regulator-name = "vcc_20";
|
|
regulator-min-microvolt = <2000000>;
|
|
regulator-max-microvolt = <2000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vccio_sd: REG5 {
|
|
regulator-name = "vccio_sd";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdd10_lcd: REG6 {
|
|
regulator-name = "vdd10_lcd";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vcca_33: REG7 {
|
|
regulator-name = "vcca_33";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
vcc_lan: REG8 {
|
|
regulator-name = "vcca_lan";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
vccio_pmu: REG9 {
|
|
regulator-name = "vccio_pmu";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
vdd_10: REG10 {
|
|
regulator-name = "vdd_10";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vccio_wl: vcc_18: REG11 {
|
|
regulator-name = "vcc_18";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vcc18_lcd: REG12 {
|
|
regulator-name = "vcc18_lcd";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&io_domains {
|
|
status = "okay";
|
|
|
|
audio-supply = <&vcca_33>;
|
|
bb-supply = <&vcc_io>;
|
|
dvp-supply = <&dovdd_1v8>;
|
|
flash0-supply = <&vcc_flash>;
|
|
flash1-supply = <&vcc_lan>;
|
|
gpio30-supply = <&vcc_io>;
|
|
gpio1830-supply = <&vcc_io>;
|
|
lcdc-supply = <&vcc_io>;
|
|
sdcard-supply = <&vccio_sd>;
|
|
wifi-supply = <&vccio_wl>;
|
|
};
|
|
|
|
&pinctrl {
|
|
pcfg_output_high: pcfg-output-high {
|
|
output-high;
|
|
};
|
|
|
|
pcfg_output_low: pcfg-output-low {
|
|
output-low;
|
|
};
|
|
|
|
pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma {
|
|
bias-pull-up;
|
|
drive-strength = <12>;
|
|
};
|
|
|
|
act8846 {
|
|
pwr_hold: pwr-hold {
|
|
rockchip,pins = <0 1 RK_FUNC_GPIO &pcfg_output_high>;
|
|
};
|
|
|
|
pmic_vsel: pmic-vsel {
|
|
rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_output_low>;
|
|
};
|
|
};
|
|
|
|
gmac {
|
|
phy_int: phy-int {
|
|
rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
|
|
phy_pmeb: phy-pmeb {
|
|
rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
|
|
phy_rst: phy-rst {
|
|
rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&tsadc {
|
|
rockchip,hw-tshut-mode = <0>;
|
|
rockchip,hw-tshut-polarity = <0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&vopb {
|
|
status = "okay";
|
|
};
|
|
|
|
&vopb_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&vopl {
|
|
status = "okay";
|
|
};
|
|
|
|
&vopl_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&wdt {
|
|
status = "okay";
|
|
};
|