forked from Minki/linux
34a3740d6b
The scan code creates an iflist_mtx -> mtx locking dependency, and a few other places, notably radar detection, were creating the opposite dependency, causing lockdep to complain. As scan and radar detection are mutually exclusive, the deadlock can't really happen in practice, but it's still bad form. A similar issue exists in the monitor mode code, but this is only used by channel-context drivers right now and those have to have hardware scan, so that also can't happen. Still, fix these issues by making some of the channel context code require the mtx to be held rather than acquiring it, thus allowing the monitor/radar callers to keep the iflist_mtx->mtx lock ordering. While at it, also fix access to the local->scanning variable in the radar code, and document that radar_detect_enabled is now properly protected by the mtx. All this would now introduce an ABBA deadlock between the DFS work cancelling and local->mtx, so change the locking there a bit to not need to use cancel_delayed_work_sync() but be able to just use cancel_delayed_work(). The work is also safely stopped/removed when the interface is stopped, so no extra changes are needed. Reported-by: Kalle Valo <kvalo@qca.qualcomm.com> Tested-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
4403 lines
123 KiB
C
4403 lines
123 KiB
C
/*
|
|
* BSS client mode implementation
|
|
* Copyright 2003-2008, Jouni Malinen <j@w1.fi>
|
|
* Copyright 2004, Instant802 Networks, Inc.
|
|
* Copyright 2005, Devicescape Software, Inc.
|
|
* Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
|
|
* Copyright 2007, Michael Wu <flamingice@sourmilk.net>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/if_ether.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/if_arp.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/rtnetlink.h>
|
|
#include <linux/pm_qos.h>
|
|
#include <linux/crc32.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/export.h>
|
|
#include <net/mac80211.h>
|
|
#include <asm/unaligned.h>
|
|
|
|
#include "ieee80211_i.h"
|
|
#include "driver-ops.h"
|
|
#include "rate.h"
|
|
#include "led.h"
|
|
|
|
#define IEEE80211_AUTH_TIMEOUT (HZ / 5)
|
|
#define IEEE80211_AUTH_TIMEOUT_LONG (HZ / 2)
|
|
#define IEEE80211_AUTH_TIMEOUT_SHORT (HZ / 10)
|
|
#define IEEE80211_AUTH_MAX_TRIES 3
|
|
#define IEEE80211_AUTH_WAIT_ASSOC (HZ * 5)
|
|
#define IEEE80211_ASSOC_TIMEOUT (HZ / 5)
|
|
#define IEEE80211_ASSOC_TIMEOUT_LONG (HZ / 2)
|
|
#define IEEE80211_ASSOC_TIMEOUT_SHORT (HZ / 10)
|
|
#define IEEE80211_ASSOC_MAX_TRIES 3
|
|
|
|
static int max_nullfunc_tries = 2;
|
|
module_param(max_nullfunc_tries, int, 0644);
|
|
MODULE_PARM_DESC(max_nullfunc_tries,
|
|
"Maximum nullfunc tx tries before disconnecting (reason 4).");
|
|
|
|
static int max_probe_tries = 5;
|
|
module_param(max_probe_tries, int, 0644);
|
|
MODULE_PARM_DESC(max_probe_tries,
|
|
"Maximum probe tries before disconnecting (reason 4).");
|
|
|
|
/*
|
|
* Beacon loss timeout is calculated as N frames times the
|
|
* advertised beacon interval. This may need to be somewhat
|
|
* higher than what hardware might detect to account for
|
|
* delays in the host processing frames. But since we also
|
|
* probe on beacon miss before declaring the connection lost
|
|
* default to what we want.
|
|
*/
|
|
static int beacon_loss_count = 7;
|
|
module_param(beacon_loss_count, int, 0644);
|
|
MODULE_PARM_DESC(beacon_loss_count,
|
|
"Number of beacon intervals before we decide beacon was lost.");
|
|
|
|
/*
|
|
* Time the connection can be idle before we probe
|
|
* it to see if we can still talk to the AP.
|
|
*/
|
|
#define IEEE80211_CONNECTION_IDLE_TIME (30 * HZ)
|
|
/*
|
|
* Time we wait for a probe response after sending
|
|
* a probe request because of beacon loss or for
|
|
* checking the connection still works.
|
|
*/
|
|
static int probe_wait_ms = 500;
|
|
module_param(probe_wait_ms, int, 0644);
|
|
MODULE_PARM_DESC(probe_wait_ms,
|
|
"Maximum time(ms) to wait for probe response"
|
|
" before disconnecting (reason 4).");
|
|
|
|
/*
|
|
* Weight given to the latest Beacon frame when calculating average signal
|
|
* strength for Beacon frames received in the current BSS. This must be
|
|
* between 1 and 15.
|
|
*/
|
|
#define IEEE80211_SIGNAL_AVE_WEIGHT 3
|
|
|
|
/*
|
|
* How many Beacon frames need to have been used in average signal strength
|
|
* before starting to indicate signal change events.
|
|
*/
|
|
#define IEEE80211_SIGNAL_AVE_MIN_COUNT 4
|
|
|
|
/*
|
|
* We can have multiple work items (and connection probing)
|
|
* scheduling this timer, but we need to take care to only
|
|
* reschedule it when it should fire _earlier_ than it was
|
|
* asked for before, or if it's not pending right now. This
|
|
* function ensures that. Note that it then is required to
|
|
* run this function for all timeouts after the first one
|
|
* has happened -- the work that runs from this timer will
|
|
* do that.
|
|
*/
|
|
static void run_again(struct ieee80211_sub_if_data *sdata,
|
|
unsigned long timeout)
|
|
{
|
|
sdata_assert_lock(sdata);
|
|
|
|
if (!timer_pending(&sdata->u.mgd.timer) ||
|
|
time_before(timeout, sdata->u.mgd.timer.expires))
|
|
mod_timer(&sdata->u.mgd.timer, timeout);
|
|
}
|
|
|
|
void ieee80211_sta_reset_beacon_monitor(struct ieee80211_sub_if_data *sdata)
|
|
{
|
|
if (sdata->vif.driver_flags & IEEE80211_VIF_BEACON_FILTER)
|
|
return;
|
|
|
|
if (sdata->local->hw.flags & IEEE80211_HW_CONNECTION_MONITOR)
|
|
return;
|
|
|
|
mod_timer(&sdata->u.mgd.bcn_mon_timer,
|
|
round_jiffies_up(jiffies + sdata->u.mgd.beacon_timeout));
|
|
}
|
|
|
|
void ieee80211_sta_reset_conn_monitor(struct ieee80211_sub_if_data *sdata)
|
|
{
|
|
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
|
|
|
|
if (unlikely(!sdata->u.mgd.associated))
|
|
return;
|
|
|
|
if (sdata->local->hw.flags & IEEE80211_HW_CONNECTION_MONITOR)
|
|
return;
|
|
|
|
mod_timer(&sdata->u.mgd.conn_mon_timer,
|
|
round_jiffies_up(jiffies + IEEE80211_CONNECTION_IDLE_TIME));
|
|
|
|
ifmgd->probe_send_count = 0;
|
|
}
|
|
|
|
static int ecw2cw(int ecw)
|
|
{
|
|
return (1 << ecw) - 1;
|
|
}
|
|
|
|
static u32
|
|
ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
|
|
struct ieee80211_supported_band *sband,
|
|
struct ieee80211_channel *channel,
|
|
const struct ieee80211_ht_operation *ht_oper,
|
|
const struct ieee80211_vht_operation *vht_oper,
|
|
struct cfg80211_chan_def *chandef, bool tracking)
|
|
{
|
|
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
|
|
struct cfg80211_chan_def vht_chandef;
|
|
u32 ht_cfreq, ret;
|
|
|
|
chandef->chan = channel;
|
|
chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
|
|
chandef->center_freq1 = channel->center_freq;
|
|
chandef->center_freq2 = 0;
|
|
|
|
if (!ht_oper || !sband->ht_cap.ht_supported) {
|
|
ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
|
|
goto out;
|
|
}
|
|
|
|
chandef->width = NL80211_CHAN_WIDTH_20;
|
|
|
|
ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan,
|
|
channel->band);
|
|
/* check that channel matches the right operating channel */
|
|
if (!tracking && channel->center_freq != ht_cfreq) {
|
|
/*
|
|
* It's possible that some APs are confused here;
|
|
* Netgear WNDR3700 sometimes reports 4 higher than
|
|
* the actual channel in association responses, but
|
|
* since we look at probe response/beacon data here
|
|
* it should be OK.
|
|
*/
|
|
sdata_info(sdata,
|
|
"Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
|
|
channel->center_freq, ht_cfreq,
|
|
ht_oper->primary_chan, channel->band);
|
|
ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
|
|
goto out;
|
|
}
|
|
|
|
/* check 40 MHz support, if we have it */
|
|
if (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) {
|
|
switch (ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
|
|
case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
|
|
chandef->width = NL80211_CHAN_WIDTH_40;
|
|
chandef->center_freq1 += 10;
|
|
break;
|
|
case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
|
|
chandef->width = NL80211_CHAN_WIDTH_40;
|
|
chandef->center_freq1 -= 10;
|
|
break;
|
|
}
|
|
} else {
|
|
/* 40 MHz (and 80 MHz) must be supported for VHT */
|
|
ret = IEEE80211_STA_DISABLE_VHT;
|
|
/* also mark 40 MHz disabled */
|
|
ret |= IEEE80211_STA_DISABLE_40MHZ;
|
|
goto out;
|
|
}
|
|
|
|
if (!vht_oper || !sband->vht_cap.vht_supported) {
|
|
ret = IEEE80211_STA_DISABLE_VHT;
|
|
goto out;
|
|
}
|
|
|
|
vht_chandef.chan = channel;
|
|
vht_chandef.center_freq1 =
|
|
ieee80211_channel_to_frequency(vht_oper->center_freq_seg1_idx,
|
|
channel->band);
|
|
vht_chandef.center_freq2 = 0;
|
|
|
|
switch (vht_oper->chan_width) {
|
|
case IEEE80211_VHT_CHANWIDTH_USE_HT:
|
|
vht_chandef.width = chandef->width;
|
|
break;
|
|
case IEEE80211_VHT_CHANWIDTH_80MHZ:
|
|
vht_chandef.width = NL80211_CHAN_WIDTH_80;
|
|
break;
|
|
case IEEE80211_VHT_CHANWIDTH_160MHZ:
|
|
vht_chandef.width = NL80211_CHAN_WIDTH_160;
|
|
break;
|
|
case IEEE80211_VHT_CHANWIDTH_80P80MHZ:
|
|
vht_chandef.width = NL80211_CHAN_WIDTH_80P80;
|
|
vht_chandef.center_freq2 =
|
|
ieee80211_channel_to_frequency(
|
|
vht_oper->center_freq_seg2_idx,
|
|
channel->band);
|
|
break;
|
|
default:
|
|
if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
|
|
sdata_info(sdata,
|
|
"AP VHT operation IE has invalid channel width (%d), disable VHT\n",
|
|
vht_oper->chan_width);
|
|
ret = IEEE80211_STA_DISABLE_VHT;
|
|
goto out;
|
|
}
|
|
|
|
if (!cfg80211_chandef_valid(&vht_chandef)) {
|
|
if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
|
|
sdata_info(sdata,
|
|
"AP VHT information is invalid, disable VHT\n");
|
|
ret = IEEE80211_STA_DISABLE_VHT;
|
|
goto out;
|
|
}
|
|
|
|
if (cfg80211_chandef_identical(chandef, &vht_chandef)) {
|
|
ret = 0;
|
|
goto out;
|
|
}
|
|
|
|
if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) {
|
|
if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
|
|
sdata_info(sdata,
|
|
"AP VHT information doesn't match HT, disable VHT\n");
|
|
ret = IEEE80211_STA_DISABLE_VHT;
|
|
goto out;
|
|
}
|
|
|
|
*chandef = vht_chandef;
|
|
|
|
ret = 0;
|
|
|
|
out:
|
|
/* don't print the message below for VHT mismatch if VHT is disabled */
|
|
if (ret & IEEE80211_STA_DISABLE_VHT)
|
|
vht_chandef = *chandef;
|
|
|
|
/*
|
|
* Ignore the DISABLED flag when we're already connected and only
|
|
* tracking the APs beacon for bandwidth changes - otherwise we
|
|
* might get disconnected here if we connect to an AP, update our
|
|
* regulatory information based on the AP's country IE and the
|
|
* information we have is wrong/outdated and disables the channel
|
|
* that we're actually using for the connection to the AP.
|
|
*/
|
|
while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef,
|
|
tracking ? 0 :
|
|
IEEE80211_CHAN_DISABLED)) {
|
|
if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) {
|
|
ret = IEEE80211_STA_DISABLE_HT |
|
|
IEEE80211_STA_DISABLE_VHT;
|
|
break;
|
|
}
|
|
|
|
ret |= ieee80211_chandef_downgrade(chandef);
|
|
}
|
|
|
|
if (chandef->width != vht_chandef.width && !tracking)
|
|
sdata_info(sdata,
|
|
"capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n");
|
|
|
|
WARN_ON_ONCE(!cfg80211_chandef_valid(chandef));
|
|
return ret;
|
|
}
|
|
|
|
static int ieee80211_config_bw(struct ieee80211_sub_if_data *sdata,
|
|
struct sta_info *sta,
|
|
const struct ieee80211_ht_operation *ht_oper,
|
|
const struct ieee80211_vht_operation *vht_oper,
|
|
const u8 *bssid, u32 *changed)
|
|
{
|
|
struct ieee80211_local *local = sdata->local;
|
|
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
|
|
struct ieee80211_supported_band *sband;
|
|
struct ieee80211_channel *chan;
|
|
struct cfg80211_chan_def chandef;
|
|
u16 ht_opmode;
|
|
u32 flags;
|
|
enum ieee80211_sta_rx_bandwidth new_sta_bw;
|
|
int ret;
|
|
|
|
/* if HT was/is disabled, don't track any bandwidth changes */
|
|
if (ifmgd->flags & IEEE80211_STA_DISABLE_HT || !ht_oper)
|
|
return 0;
|
|
|
|
/* don't check VHT if we associated as non-VHT station */
|
|
if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT)
|
|
vht_oper = NULL;
|
|
|
|
if (WARN_ON_ONCE(!sta))
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* if bss configuration changed store the new one -
|
|
* this may be applicable even if channel is identical
|
|
*/
|
|
ht_opmode = le16_to_cpu(ht_oper->operation_mode);
|
|
if (sdata->vif.bss_conf.ht_operation_mode != ht_opmode) {
|
|
*changed |= BSS_CHANGED_HT;
|
|
sdata->vif.bss_conf.ht_operation_mode = ht_opmode;
|
|
}
|
|
|
|
chan = sdata->vif.bss_conf.chandef.chan;
|
|
sband = local->hw.wiphy->bands[chan->band];
|
|
|
|
/* calculate new channel (type) based on HT/VHT operation IEs */
|
|
flags = ieee80211_determine_chantype(sdata, sband, chan, ht_oper,
|
|
vht_oper, &chandef, true);
|
|
|
|
/*
|
|
* Downgrade the new channel if we associated with restricted
|
|
* capabilities. For example, if we associated as a 20 MHz STA
|
|
* to a 40 MHz AP (due to regulatory, capabilities or config
|
|
* reasons) then switching to a 40 MHz channel now won't do us
|
|
* any good -- we couldn't use it with the AP.
|
|
*/
|
|
if (ifmgd->flags & IEEE80211_STA_DISABLE_80P80MHZ &&
|
|
chandef.width == NL80211_CHAN_WIDTH_80P80)
|
|
flags |= ieee80211_chandef_downgrade(&chandef);
|
|
if (ifmgd->flags & IEEE80211_STA_DISABLE_160MHZ &&
|
|
chandef.width == NL80211_CHAN_WIDTH_160)
|
|
flags |= ieee80211_chandef_downgrade(&chandef);
|
|
if (ifmgd->flags & IEEE80211_STA_DISABLE_40MHZ &&
|
|
chandef.width > NL80211_CHAN_WIDTH_20)
|
|
flags |= ieee80211_chandef_downgrade(&chandef);
|
|
|
|
if (cfg80211_chandef_identical(&chandef, &sdata->vif.bss_conf.chandef))
|
|
return 0;
|
|
|
|
sdata_info(sdata,
|
|
"AP %pM changed bandwidth, new config is %d MHz, width %d (%d/%d MHz)\n",
|
|
ifmgd->bssid, chandef.chan->center_freq, chandef.width,
|
|
chandef.center_freq1, chandef.center_freq2);
|
|
|
|
if (flags != (ifmgd->flags & (IEEE80211_STA_DISABLE_HT |
|
|
IEEE80211_STA_DISABLE_VHT |
|
|
IEEE80211_STA_DISABLE_40MHZ |
|
|
IEEE80211_STA_DISABLE_80P80MHZ |
|
|
IEEE80211_STA_DISABLE_160MHZ)) ||
|
|
!cfg80211_chandef_valid(&chandef)) {
|
|
sdata_info(sdata,
|
|
"AP %pM changed bandwidth in a way we can't support - disconnect\n",
|
|
ifmgd->bssid);
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (chandef.width) {
|
|
case NL80211_CHAN_WIDTH_20_NOHT:
|
|
case NL80211_CHAN_WIDTH_20:
|
|
new_sta_bw = IEEE80211_STA_RX_BW_20;
|
|
break;
|
|
case NL80211_CHAN_WIDTH_40:
|
|
new_sta_bw = IEEE80211_STA_RX_BW_40;
|
|
break;
|
|
case NL80211_CHAN_WIDTH_80:
|
|
new_sta_bw = IEEE80211_STA_RX_BW_80;
|
|
break;
|
|
case NL80211_CHAN_WIDTH_80P80:
|
|
case NL80211_CHAN_WIDTH_160:
|
|
new_sta_bw = IEEE80211_STA_RX_BW_160;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (new_sta_bw > sta->cur_max_bandwidth)
|
|
new_sta_bw = sta->cur_max_bandwidth;
|
|
|
|
if (new_sta_bw < sta->sta.bandwidth) {
|
|
sta->sta.bandwidth = new_sta_bw;
|
|
rate_control_rate_update(local, sband, sta,
|
|
IEEE80211_RC_BW_CHANGED);
|
|
}
|
|
|
|
ret = ieee80211_vif_change_bandwidth(sdata, &chandef, changed);
|
|
if (ret) {
|
|
sdata_info(sdata,
|
|
"AP %pM changed bandwidth to incompatible one - disconnect\n",
|
|
ifmgd->bssid);
|
|
return ret;
|
|
}
|
|
|
|
if (new_sta_bw > sta->sta.bandwidth) {
|
|
sta->sta.bandwidth = new_sta_bw;
|
|
rate_control_rate_update(local, sband, sta,
|
|
IEEE80211_RC_BW_CHANGED);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* frame sending functions */
|
|
|
|
static void ieee80211_add_ht_ie(struct ieee80211_sub_if_data *sdata,
|
|
struct sk_buff *skb, u8 ap_ht_param,
|
|
struct ieee80211_supported_band *sband,
|
|
struct ieee80211_channel *channel,
|
|
enum ieee80211_smps_mode smps)
|
|
{
|
|
u8 *pos;
|
|
u32 flags = channel->flags;
|
|
u16 cap;
|
|
struct ieee80211_sta_ht_cap ht_cap;
|
|
|
|
BUILD_BUG_ON(sizeof(ht_cap) != sizeof(sband->ht_cap));
|
|
|
|
memcpy(&ht_cap, &sband->ht_cap, sizeof(ht_cap));
|
|
ieee80211_apply_htcap_overrides(sdata, &ht_cap);
|
|
|
|
/* determine capability flags */
|
|
cap = ht_cap.cap;
|
|
|
|
switch (ap_ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
|
|
case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
|
|
if (flags & IEEE80211_CHAN_NO_HT40PLUS) {
|
|
cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
|
|
cap &= ~IEEE80211_HT_CAP_SGI_40;
|
|
}
|
|
break;
|
|
case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
|
|
if (flags & IEEE80211_CHAN_NO_HT40MINUS) {
|
|
cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
|
|
cap &= ~IEEE80211_HT_CAP_SGI_40;
|
|
}
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* If 40 MHz was disabled associate as though we weren't
|
|
* capable of 40 MHz -- some broken APs will never fall
|
|
* back to trying to transmit in 20 MHz.
|
|
*/
|
|
if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_40MHZ) {
|
|
cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
|
|
cap &= ~IEEE80211_HT_CAP_SGI_40;
|
|
}
|
|
|
|
/* set SM PS mode properly */
|
|
cap &= ~IEEE80211_HT_CAP_SM_PS;
|
|
switch (smps) {
|
|
case IEEE80211_SMPS_AUTOMATIC:
|
|
case IEEE80211_SMPS_NUM_MODES:
|
|
WARN_ON(1);
|
|
case IEEE80211_SMPS_OFF:
|
|
cap |= WLAN_HT_CAP_SM_PS_DISABLED <<
|
|
IEEE80211_HT_CAP_SM_PS_SHIFT;
|
|
break;
|
|
case IEEE80211_SMPS_STATIC:
|
|
cap |= WLAN_HT_CAP_SM_PS_STATIC <<
|
|
IEEE80211_HT_CAP_SM_PS_SHIFT;
|
|
break;
|
|
case IEEE80211_SMPS_DYNAMIC:
|
|
cap |= WLAN_HT_CAP_SM_PS_DYNAMIC <<
|
|
IEEE80211_HT_CAP_SM_PS_SHIFT;
|
|
break;
|
|
}
|
|
|
|
/* reserve and fill IE */
|
|
pos = skb_put(skb, sizeof(struct ieee80211_ht_cap) + 2);
|
|
ieee80211_ie_build_ht_cap(pos, &ht_cap, cap);
|
|
}
|
|
|
|
static void ieee80211_add_vht_ie(struct ieee80211_sub_if_data *sdata,
|
|
struct sk_buff *skb,
|
|
struct ieee80211_supported_band *sband,
|
|
struct ieee80211_vht_cap *ap_vht_cap)
|
|
{
|
|
u8 *pos;
|
|
u32 cap;
|
|
struct ieee80211_sta_vht_cap vht_cap;
|
|
|
|
BUILD_BUG_ON(sizeof(vht_cap) != sizeof(sband->vht_cap));
|
|
|
|
memcpy(&vht_cap, &sband->vht_cap, sizeof(vht_cap));
|
|
ieee80211_apply_vhtcap_overrides(sdata, &vht_cap);
|
|
|
|
/* determine capability flags */
|
|
cap = vht_cap.cap;
|
|
|
|
if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_80P80MHZ) {
|
|
cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ;
|
|
cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ;
|
|
}
|
|
|
|
if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_160MHZ) {
|
|
cap &= ~IEEE80211_VHT_CAP_SHORT_GI_160;
|
|
cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ;
|
|
}
|
|
|
|
/*
|
|
* Some APs apparently get confused if our capabilities are better
|
|
* than theirs, so restrict what we advertise in the assoc request.
|
|
*/
|
|
if (!(ap_vht_cap->vht_cap_info &
|
|
cpu_to_le32(IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE)))
|
|
cap &= ~IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE;
|
|
|
|
/* reserve and fill IE */
|
|
pos = skb_put(skb, sizeof(struct ieee80211_vht_cap) + 2);
|
|
ieee80211_ie_build_vht_cap(pos, &vht_cap, cap);
|
|
}
|
|
|
|
static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
|
|
{
|
|
struct ieee80211_local *local = sdata->local;
|
|
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
|
|
struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
|
|
struct sk_buff *skb;
|
|
struct ieee80211_mgmt *mgmt;
|
|
u8 *pos, qos_info;
|
|
size_t offset = 0, noffset;
|
|
int i, count, rates_len, supp_rates_len, shift;
|
|
u16 capab;
|
|
struct ieee80211_supported_band *sband;
|
|
struct ieee80211_chanctx_conf *chanctx_conf;
|
|
struct ieee80211_channel *chan;
|
|
u32 rate_flags, rates = 0;
|
|
|
|
sdata_assert_lock(sdata);
|
|
|
|
rcu_read_lock();
|
|
chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
|
|
if (WARN_ON(!chanctx_conf)) {
|
|
rcu_read_unlock();
|
|
return;
|
|
}
|
|
chan = chanctx_conf->def.chan;
|
|
rate_flags = ieee80211_chandef_rate_flags(&chanctx_conf->def);
|
|
rcu_read_unlock();
|
|
sband = local->hw.wiphy->bands[chan->band];
|
|
shift = ieee80211_vif_get_shift(&sdata->vif);
|
|
|
|
if (assoc_data->supp_rates_len) {
|
|
/*
|
|
* Get all rates supported by the device and the AP as
|
|
* some APs don't like getting a superset of their rates
|
|
* in the association request (e.g. D-Link DAP 1353 in
|
|
* b-only mode)...
|
|
*/
|
|
rates_len = ieee80211_parse_bitrates(&chanctx_conf->def, sband,
|
|
assoc_data->supp_rates,
|
|
assoc_data->supp_rates_len,
|
|
&rates);
|
|
} else {
|
|
/*
|
|
* In case AP not provide any supported rates information
|
|
* before association, we send information element(s) with
|
|
* all rates that we support.
|
|
*/
|
|
rates_len = 0;
|
|
for (i = 0; i < sband->n_bitrates; i++) {
|
|
if ((rate_flags & sband->bitrates[i].flags)
|
|
!= rate_flags)
|
|
continue;
|
|
rates |= BIT(i);
|
|
rates_len++;
|
|
}
|
|
}
|
|
|
|
skb = alloc_skb(local->hw.extra_tx_headroom +
|
|
sizeof(*mgmt) + /* bit too much but doesn't matter */
|
|
2 + assoc_data->ssid_len + /* SSID */
|
|
4 + rates_len + /* (extended) rates */
|
|
4 + /* power capability */
|
|
2 + 2 * sband->n_channels + /* supported channels */
|
|
2 + sizeof(struct ieee80211_ht_cap) + /* HT */
|
|
2 + sizeof(struct ieee80211_vht_cap) + /* VHT */
|
|
assoc_data->ie_len + /* extra IEs */
|
|
9, /* WMM */
|
|
GFP_KERNEL);
|
|
if (!skb)
|
|
return;
|
|
|
|
skb_reserve(skb, local->hw.extra_tx_headroom);
|
|
|
|
capab = WLAN_CAPABILITY_ESS;
|
|
|
|
if (sband->band == IEEE80211_BAND_2GHZ) {
|
|
if (!(local->hw.flags & IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE))
|
|
capab |= WLAN_CAPABILITY_SHORT_SLOT_TIME;
|
|
if (!(local->hw.flags & IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE))
|
|
capab |= WLAN_CAPABILITY_SHORT_PREAMBLE;
|
|
}
|
|
|
|
if (assoc_data->capability & WLAN_CAPABILITY_PRIVACY)
|
|
capab |= WLAN_CAPABILITY_PRIVACY;
|
|
|
|
if ((assoc_data->capability & WLAN_CAPABILITY_SPECTRUM_MGMT) &&
|
|
(local->hw.flags & IEEE80211_HW_SPECTRUM_MGMT))
|
|
capab |= WLAN_CAPABILITY_SPECTRUM_MGMT;
|
|
|
|
mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24);
|
|
memset(mgmt, 0, 24);
|
|
memcpy(mgmt->da, assoc_data->bss->bssid, ETH_ALEN);
|
|
memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
|
|
memcpy(mgmt->bssid, assoc_data->bss->bssid, ETH_ALEN);
|
|
|
|
if (!is_zero_ether_addr(assoc_data->prev_bssid)) {
|
|
skb_put(skb, 10);
|
|
mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
|
|
IEEE80211_STYPE_REASSOC_REQ);
|
|
mgmt->u.reassoc_req.capab_info = cpu_to_le16(capab);
|
|
mgmt->u.reassoc_req.listen_interval =
|
|
cpu_to_le16(local->hw.conf.listen_interval);
|
|
memcpy(mgmt->u.reassoc_req.current_ap, assoc_data->prev_bssid,
|
|
ETH_ALEN);
|
|
} else {
|
|
skb_put(skb, 4);
|
|
mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
|
|
IEEE80211_STYPE_ASSOC_REQ);
|
|
mgmt->u.assoc_req.capab_info = cpu_to_le16(capab);
|
|
mgmt->u.assoc_req.listen_interval =
|
|
cpu_to_le16(local->hw.conf.listen_interval);
|
|
}
|
|
|
|
/* SSID */
|
|
pos = skb_put(skb, 2 + assoc_data->ssid_len);
|
|
*pos++ = WLAN_EID_SSID;
|
|
*pos++ = assoc_data->ssid_len;
|
|
memcpy(pos, assoc_data->ssid, assoc_data->ssid_len);
|
|
|
|
/* add all rates which were marked to be used above */
|
|
supp_rates_len = rates_len;
|
|
if (supp_rates_len > 8)
|
|
supp_rates_len = 8;
|
|
|
|
pos = skb_put(skb, supp_rates_len + 2);
|
|
*pos++ = WLAN_EID_SUPP_RATES;
|
|
*pos++ = supp_rates_len;
|
|
|
|
count = 0;
|
|
for (i = 0; i < sband->n_bitrates; i++) {
|
|
if (BIT(i) & rates) {
|
|
int rate = DIV_ROUND_UP(sband->bitrates[i].bitrate,
|
|
5 * (1 << shift));
|
|
*pos++ = (u8) rate;
|
|
if (++count == 8)
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (rates_len > count) {
|
|
pos = skb_put(skb, rates_len - count + 2);
|
|
*pos++ = WLAN_EID_EXT_SUPP_RATES;
|
|
*pos++ = rates_len - count;
|
|
|
|
for (i++; i < sband->n_bitrates; i++) {
|
|
if (BIT(i) & rates) {
|
|
int rate;
|
|
rate = DIV_ROUND_UP(sband->bitrates[i].bitrate,
|
|
5 * (1 << shift));
|
|
*pos++ = (u8) rate;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT) {
|
|
/* 1. power capabilities */
|
|
pos = skb_put(skb, 4);
|
|
*pos++ = WLAN_EID_PWR_CAPABILITY;
|
|
*pos++ = 2;
|
|
*pos++ = 0; /* min tx power */
|
|
/* max tx power */
|
|
*pos++ = ieee80211_chandef_max_power(&chanctx_conf->def);
|
|
|
|
/* 2. supported channels */
|
|
/* TODO: get this in reg domain format */
|
|
pos = skb_put(skb, 2 * sband->n_channels + 2);
|
|
*pos++ = WLAN_EID_SUPPORTED_CHANNELS;
|
|
*pos++ = 2 * sband->n_channels;
|
|
for (i = 0; i < sband->n_channels; i++) {
|
|
*pos++ = ieee80211_frequency_to_channel(
|
|
sband->channels[i].center_freq);
|
|
*pos++ = 1; /* one channel in the subband*/
|
|
}
|
|
}
|
|
|
|
/* if present, add any custom IEs that go before HT */
|
|
if (assoc_data->ie_len) {
|
|
static const u8 before_ht[] = {
|
|
WLAN_EID_SSID,
|
|
WLAN_EID_SUPP_RATES,
|
|
WLAN_EID_EXT_SUPP_RATES,
|
|
WLAN_EID_PWR_CAPABILITY,
|
|
WLAN_EID_SUPPORTED_CHANNELS,
|
|
WLAN_EID_RSN,
|
|
WLAN_EID_QOS_CAPA,
|
|
WLAN_EID_RRM_ENABLED_CAPABILITIES,
|
|
WLAN_EID_MOBILITY_DOMAIN,
|
|
WLAN_EID_SUPPORTED_REGULATORY_CLASSES,
|
|
};
|
|
noffset = ieee80211_ie_split(assoc_data->ie, assoc_data->ie_len,
|
|
before_ht, ARRAY_SIZE(before_ht),
|
|
offset);
|
|
pos = skb_put(skb, noffset - offset);
|
|
memcpy(pos, assoc_data->ie + offset, noffset - offset);
|
|
offset = noffset;
|
|
}
|
|
|
|
if (WARN_ON_ONCE((ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
|
|
!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)))
|
|
ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
|
|
|
|
if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT))
|
|
ieee80211_add_ht_ie(sdata, skb, assoc_data->ap_ht_param,
|
|
sband, chan, sdata->smps_mode);
|
|
|
|
if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
|
|
ieee80211_add_vht_ie(sdata, skb, sband,
|
|
&assoc_data->ap_vht_cap);
|
|
|
|
/* if present, add any custom non-vendor IEs that go after HT */
|
|
if (assoc_data->ie_len) {
|
|
noffset = ieee80211_ie_split_vendor(assoc_data->ie,
|
|
assoc_data->ie_len,
|
|
offset);
|
|
pos = skb_put(skb, noffset - offset);
|
|
memcpy(pos, assoc_data->ie + offset, noffset - offset);
|
|
offset = noffset;
|
|
}
|
|
|
|
if (assoc_data->wmm) {
|
|
if (assoc_data->uapsd) {
|
|
qos_info = ifmgd->uapsd_queues;
|
|
qos_info |= (ifmgd->uapsd_max_sp_len <<
|
|
IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT);
|
|
} else {
|
|
qos_info = 0;
|
|
}
|
|
|
|
pos = skb_put(skb, 9);
|
|
*pos++ = WLAN_EID_VENDOR_SPECIFIC;
|
|
*pos++ = 7; /* len */
|
|
*pos++ = 0x00; /* Microsoft OUI 00:50:F2 */
|
|
*pos++ = 0x50;
|
|
*pos++ = 0xf2;
|
|
*pos++ = 2; /* WME */
|
|
*pos++ = 0; /* WME info */
|
|
*pos++ = 1; /* WME ver */
|
|
*pos++ = qos_info;
|
|
}
|
|
|
|
/* add any remaining custom (i.e. vendor specific here) IEs */
|
|
if (assoc_data->ie_len) {
|
|
noffset = assoc_data->ie_len;
|
|
pos = skb_put(skb, noffset - offset);
|
|
memcpy(pos, assoc_data->ie + offset, noffset - offset);
|
|
}
|
|
|
|
drv_mgd_prepare_tx(local, sdata);
|
|
|
|
IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
|
|
if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)
|
|
IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS |
|
|
IEEE80211_TX_INTFL_MLME_CONN_TX;
|
|
ieee80211_tx_skb(sdata, skb);
|
|
}
|
|
|
|
void ieee80211_send_pspoll(struct ieee80211_local *local,
|
|
struct ieee80211_sub_if_data *sdata)
|
|
{
|
|
struct ieee80211_pspoll *pspoll;
|
|
struct sk_buff *skb;
|
|
|
|
skb = ieee80211_pspoll_get(&local->hw, &sdata->vif);
|
|
if (!skb)
|
|
return;
|
|
|
|
pspoll = (struct ieee80211_pspoll *) skb->data;
|
|
pspoll->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
|
|
|
|
IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
|
|
ieee80211_tx_skb(sdata, skb);
|
|
}
|
|
|
|
void ieee80211_send_nullfunc(struct ieee80211_local *local,
|
|
struct ieee80211_sub_if_data *sdata,
|
|
int powersave)
|
|
{
|
|
struct sk_buff *skb;
|
|
struct ieee80211_hdr_3addr *nullfunc;
|
|
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
|
|
|
|
skb = ieee80211_nullfunc_get(&local->hw, &sdata->vif);
|
|
if (!skb)
|
|
return;
|
|
|
|
nullfunc = (struct ieee80211_hdr_3addr *) skb->data;
|
|
if (powersave)
|
|
nullfunc->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
|
|
|
|
IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT |
|
|
IEEE80211_TX_INTFL_OFFCHAN_TX_OK;
|
|
|
|
if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)
|
|
IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
|
|
|
|
if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL)
|
|
IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_USE_MINRATE;
|
|
|
|
ieee80211_tx_skb(sdata, skb);
|
|
}
|
|
|
|
static void ieee80211_send_4addr_nullfunc(struct ieee80211_local *local,
|
|
struct ieee80211_sub_if_data *sdata)
|
|
{
|
|
struct sk_buff *skb;
|
|
struct ieee80211_hdr *nullfunc;
|
|
__le16 fc;
|
|
|
|
if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
|
|
return;
|
|
|
|
skb = dev_alloc_skb(local->hw.extra_tx_headroom + 30);
|
|
if (!skb)
|
|
return;
|
|
|
|
skb_reserve(skb, local->hw.extra_tx_headroom);
|
|
|
|
nullfunc = (struct ieee80211_hdr *) skb_put(skb, 30);
|
|
memset(nullfunc, 0, 30);
|
|
fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC |
|
|
IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS);
|
|
nullfunc->frame_control = fc;
|
|
memcpy(nullfunc->addr1, sdata->u.mgd.bssid, ETH_ALEN);
|
|
memcpy(nullfunc->addr2, sdata->vif.addr, ETH_ALEN);
|
|
memcpy(nullfunc->addr3, sdata->u.mgd.bssid, ETH_ALEN);
|
|
memcpy(nullfunc->addr4, sdata->vif.addr, ETH_ALEN);
|
|
|
|
IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
|
|
ieee80211_tx_skb(sdata, skb);
|
|
}
|
|
|
|
/* spectrum management related things */
|
|
static void ieee80211_chswitch_work(struct work_struct *work)
|
|
{
|
|
struct ieee80211_sub_if_data *sdata =
|
|
container_of(work, struct ieee80211_sub_if_data, u.mgd.chswitch_work);
|
|
struct ieee80211_local *local = sdata->local;
|
|
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
|
|
u32 changed = 0;
|
|
int ret;
|
|
|
|
if (!ieee80211_sdata_running(sdata))
|
|
return;
|
|
|
|
sdata_lock(sdata);
|
|
if (!ifmgd->associated)
|
|
goto out;
|
|
|
|
mutex_lock(&local->mtx);
|
|
ret = ieee80211_vif_change_channel(sdata, &changed);
|
|
mutex_unlock(&local->mtx);
|
|
if (ret) {
|
|
sdata_info(sdata,
|
|
"vif channel switch failed, disconnecting\n");
|
|
ieee80211_queue_work(&sdata->local->hw,
|
|
&ifmgd->csa_connection_drop_work);
|
|
goto out;
|
|
}
|
|
|
|
if (!local->use_chanctx) {
|
|
local->_oper_chandef = sdata->csa_chandef;
|
|
/* Call "hw_config" only if doing sw channel switch.
|
|
* Otherwise update the channel directly
|
|
*/
|
|
if (!local->ops->channel_switch)
|
|
ieee80211_hw_config(local, 0);
|
|
else
|
|
local->hw.conf.chandef = local->_oper_chandef;
|
|
}
|
|
|
|
/* XXX: shouldn't really modify cfg80211-owned data! */
|
|
ifmgd->associated->channel = sdata->csa_chandef.chan;
|
|
|
|
/* XXX: wait for a beacon first? */
|
|
ieee80211_wake_queues_by_reason(&local->hw,
|
|
IEEE80211_MAX_QUEUE_MAP,
|
|
IEEE80211_QUEUE_STOP_REASON_CSA);
|
|
|
|
ieee80211_bss_info_change_notify(sdata, changed);
|
|
|
|
out:
|
|
sdata->vif.csa_active = false;
|
|
ifmgd->flags &= ~IEEE80211_STA_CSA_RECEIVED;
|
|
sdata_unlock(sdata);
|
|
}
|
|
|
|
void ieee80211_chswitch_done(struct ieee80211_vif *vif, bool success)
|
|
{
|
|
struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
|
|
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
|
|
|
|
trace_api_chswitch_done(sdata, success);
|
|
if (!success) {
|
|
sdata_info(sdata,
|
|
"driver channel switch failed, disconnecting\n");
|
|
ieee80211_queue_work(&sdata->local->hw,
|
|
&ifmgd->csa_connection_drop_work);
|
|
} else {
|
|
ieee80211_queue_work(&sdata->local->hw, &ifmgd->chswitch_work);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL(ieee80211_chswitch_done);
|
|
|
|
static void ieee80211_chswitch_timer(unsigned long data)
|
|
{
|
|
struct ieee80211_sub_if_data *sdata =
|
|
(struct ieee80211_sub_if_data *) data;
|
|
|
|
ieee80211_queue_work(&sdata->local->hw, &sdata->u.mgd.chswitch_work);
|
|
}
|
|
|
|
static void
|
|
ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
|
|
u64 timestamp, struct ieee802_11_elems *elems,
|
|
bool beacon)
|
|
{
|
|
struct ieee80211_local *local = sdata->local;
|
|
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
|
|
struct cfg80211_bss *cbss = ifmgd->associated;
|
|
struct ieee80211_chanctx *chanctx;
|
|
enum ieee80211_band current_band;
|
|
struct ieee80211_csa_ie csa_ie;
|
|
int res;
|
|
|
|
sdata_assert_lock(sdata);
|
|
|
|
if (!cbss)
|
|
return;
|
|
|
|
if (local->scanning)
|
|
return;
|
|
|
|
/* disregard subsequent announcements if we are already processing */
|
|
if (ifmgd->flags & IEEE80211_STA_CSA_RECEIVED)
|
|
return;
|
|
|
|
current_band = cbss->channel->band;
|
|
memset(&csa_ie, 0, sizeof(csa_ie));
|
|
res = ieee80211_parse_ch_switch_ie(sdata, elems, beacon, current_band,
|
|
ifmgd->flags,
|
|
ifmgd->associated->bssid, &csa_ie);
|
|
if (res < 0)
|
|
ieee80211_queue_work(&local->hw,
|
|
&ifmgd->csa_connection_drop_work);
|
|
if (res)
|
|
return;
|
|
|
|
if (!cfg80211_chandef_usable(local->hw.wiphy, &csa_ie.chandef,
|
|
IEEE80211_CHAN_DISABLED)) {
|
|
sdata_info(sdata,
|
|
"AP %pM switches to unsupported channel (%d MHz, width:%d, CF1/2: %d/%d MHz), disconnecting\n",
|
|
ifmgd->associated->bssid,
|
|
csa_ie.chandef.chan->center_freq,
|
|
csa_ie.chandef.width, csa_ie.chandef.center_freq1,
|
|
csa_ie.chandef.center_freq2);
|
|
ieee80211_queue_work(&local->hw,
|
|
&ifmgd->csa_connection_drop_work);
|
|
return;
|
|
}
|
|
|
|
ifmgd->flags |= IEEE80211_STA_CSA_RECEIVED;
|
|
sdata->vif.csa_active = true;
|
|
|
|
mutex_lock(&local->chanctx_mtx);
|
|
if (local->use_chanctx) {
|
|
u32 num_chanctx = 0;
|
|
list_for_each_entry(chanctx, &local->chanctx_list, list)
|
|
num_chanctx++;
|
|
|
|
if (num_chanctx > 1 ||
|
|
!(local->hw.flags & IEEE80211_HW_CHANCTX_STA_CSA)) {
|
|
sdata_info(sdata,
|
|
"not handling chan-switch with channel contexts\n");
|
|
ieee80211_queue_work(&local->hw,
|
|
&ifmgd->csa_connection_drop_work);
|
|
mutex_unlock(&local->chanctx_mtx);
|
|
return;
|
|
}
|
|
}
|
|
|
|
if (WARN_ON(!rcu_access_pointer(sdata->vif.chanctx_conf))) {
|
|
ieee80211_queue_work(&local->hw,
|
|
&ifmgd->csa_connection_drop_work);
|
|
mutex_unlock(&local->chanctx_mtx);
|
|
return;
|
|
}
|
|
chanctx = container_of(rcu_access_pointer(sdata->vif.chanctx_conf),
|
|
struct ieee80211_chanctx, conf);
|
|
if (chanctx->refcount > 1) {
|
|
sdata_info(sdata,
|
|
"channel switch with multiple interfaces on the same channel, disconnecting\n");
|
|
ieee80211_queue_work(&local->hw,
|
|
&ifmgd->csa_connection_drop_work);
|
|
mutex_unlock(&local->chanctx_mtx);
|
|
return;
|
|
}
|
|
mutex_unlock(&local->chanctx_mtx);
|
|
|
|
sdata->csa_chandef = csa_ie.chandef;
|
|
|
|
if (csa_ie.mode)
|
|
ieee80211_stop_queues_by_reason(&local->hw,
|
|
IEEE80211_MAX_QUEUE_MAP,
|
|
IEEE80211_QUEUE_STOP_REASON_CSA);
|
|
|
|
if (local->ops->channel_switch) {
|
|
/* use driver's channel switch callback */
|
|
struct ieee80211_channel_switch ch_switch = {
|
|
.timestamp = timestamp,
|
|
.block_tx = csa_ie.mode,
|
|
.chandef = csa_ie.chandef,
|
|
.count = csa_ie.count,
|
|
};
|
|
|
|
drv_channel_switch(local, &ch_switch);
|
|
return;
|
|
}
|
|
|
|
/* channel switch handled in software */
|
|
if (csa_ie.count <= 1)
|
|
ieee80211_queue_work(&local->hw, &ifmgd->chswitch_work);
|
|
else
|
|
mod_timer(&ifmgd->chswitch_timer,
|
|
TU_TO_EXP_TIME(csa_ie.count * cbss->beacon_interval));
|
|
}
|
|
|
|
static u32 ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data *sdata,
|
|
struct ieee80211_channel *channel,
|
|
const u8 *country_ie, u8 country_ie_len,
|
|
const u8 *pwr_constr_elem)
|
|
{
|
|
struct ieee80211_country_ie_triplet *triplet;
|
|
int chan = ieee80211_frequency_to_channel(channel->center_freq);
|
|
int i, chan_pwr, chan_increment, new_ap_level;
|
|
bool have_chan_pwr = false;
|
|
|
|
/* Invalid IE */
|
|
if (country_ie_len % 2 || country_ie_len < IEEE80211_COUNTRY_IE_MIN_LEN)
|
|
return 0;
|
|
|
|
triplet = (void *)(country_ie + 3);
|
|
country_ie_len -= 3;
|
|
|
|
switch (channel->band) {
|
|
default:
|
|
WARN_ON_ONCE(1);
|
|
/* fall through */
|
|
case IEEE80211_BAND_2GHZ:
|
|
case IEEE80211_BAND_60GHZ:
|
|
chan_increment = 1;
|
|
break;
|
|
case IEEE80211_BAND_5GHZ:
|
|
chan_increment = 4;
|
|
break;
|
|
}
|
|
|
|
/* find channel */
|
|
while (country_ie_len >= 3) {
|
|
u8 first_channel = triplet->chans.first_channel;
|
|
|
|
if (first_channel >= IEEE80211_COUNTRY_EXTENSION_ID)
|
|
goto next;
|
|
|
|
for (i = 0; i < triplet->chans.num_channels; i++) {
|
|
if (first_channel + i * chan_increment == chan) {
|
|
have_chan_pwr = true;
|
|
chan_pwr = triplet->chans.max_power;
|
|
break;
|
|
}
|
|
}
|
|
if (have_chan_pwr)
|
|
break;
|
|
|
|
next:
|
|
triplet++;
|
|
country_ie_len -= 3;
|
|
}
|
|
|
|
if (!have_chan_pwr)
|
|
return 0;
|
|
|
|
new_ap_level = max_t(int, 0, chan_pwr - *pwr_constr_elem);
|
|
|
|
if (sdata->ap_power_level == new_ap_level)
|
|
return 0;
|
|
|
|
sdata_info(sdata,
|
|
"Limiting TX power to %d (%d - %d) dBm as advertised by %pM\n",
|
|
new_ap_level, chan_pwr, *pwr_constr_elem,
|
|
sdata->u.mgd.bssid);
|
|
sdata->ap_power_level = new_ap_level;
|
|
if (__ieee80211_recalc_txpower(sdata))
|
|
return BSS_CHANGED_TXPOWER;
|
|
return 0;
|
|
}
|
|
|
|
/* powersave */
|
|
static void ieee80211_enable_ps(struct ieee80211_local *local,
|
|
struct ieee80211_sub_if_data *sdata)
|
|
{
|
|
struct ieee80211_conf *conf = &local->hw.conf;
|
|
|
|
/*
|
|
* If we are scanning right now then the parameters will
|
|
* take effect when scan finishes.
|
|
*/
|
|
if (local->scanning)
|
|
return;
|
|
|
|
if (conf->dynamic_ps_timeout > 0 &&
|
|
!(local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS)) {
|
|
mod_timer(&local->dynamic_ps_timer, jiffies +
|
|
msecs_to_jiffies(conf->dynamic_ps_timeout));
|
|
} else {
|
|
if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)
|
|
ieee80211_send_nullfunc(local, sdata, 1);
|
|
|
|
if ((local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) &&
|
|
(local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS))
|
|
return;
|
|
|
|
conf->flags |= IEEE80211_CONF_PS;
|
|
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
|
|
}
|
|
}
|
|
|
|
static void ieee80211_change_ps(struct ieee80211_local *local)
|
|
{
|
|
struct ieee80211_conf *conf = &local->hw.conf;
|
|
|
|
if (local->ps_sdata) {
|
|
ieee80211_enable_ps(local, local->ps_sdata);
|
|
} else if (conf->flags & IEEE80211_CONF_PS) {
|
|
conf->flags &= ~IEEE80211_CONF_PS;
|
|
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
|
|
del_timer_sync(&local->dynamic_ps_timer);
|
|
cancel_work_sync(&local->dynamic_ps_enable_work);
|
|
}
|
|
}
|
|
|
|
static bool ieee80211_powersave_allowed(struct ieee80211_sub_if_data *sdata)
|
|
{
|
|
struct ieee80211_if_managed *mgd = &sdata->u.mgd;
|
|
struct sta_info *sta = NULL;
|
|
bool authorized = false;
|
|
|
|
if (!mgd->powersave)
|
|
return false;
|
|
|
|
if (mgd->broken_ap)
|
|
return false;
|
|
|
|
if (!mgd->associated)
|
|
return false;
|
|
|
|
if (mgd->flags & IEEE80211_STA_CONNECTION_POLL)
|
|
return false;
|
|
|
|
if (!mgd->have_beacon)
|
|
return false;
|
|
|
|
rcu_read_lock();
|
|
sta = sta_info_get(sdata, mgd->bssid);
|
|
if (sta)
|
|
authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED);
|
|
rcu_read_unlock();
|
|
|
|
return authorized;
|
|
}
|
|
|
|
/* need to hold RTNL or interface lock */
|
|
void ieee80211_recalc_ps(struct ieee80211_local *local, s32 latency)
|
|
{
|
|
struct ieee80211_sub_if_data *sdata, *found = NULL;
|
|
int count = 0;
|
|
int timeout;
|
|
|
|
if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_PS)) {
|
|
local->ps_sdata = NULL;
|
|
return;
|
|
}
|
|
|
|
list_for_each_entry(sdata, &local->interfaces, list) {
|
|
if (!ieee80211_sdata_running(sdata))
|
|
continue;
|
|
if (sdata->vif.type == NL80211_IFTYPE_AP) {
|
|
/* If an AP vif is found, then disable PS
|
|
* by setting the count to zero thereby setting
|
|
* ps_sdata to NULL.
|
|
*/
|
|
count = 0;
|
|
break;
|
|
}
|
|
if (sdata->vif.type != NL80211_IFTYPE_STATION)
|
|
continue;
|
|
found = sdata;
|
|
count++;
|
|
}
|
|
|
|
if (count == 1 && ieee80211_powersave_allowed(found)) {
|
|
s32 beaconint_us;
|
|
|
|
if (latency < 0)
|
|
latency = pm_qos_request(PM_QOS_NETWORK_LATENCY);
|
|
|
|
beaconint_us = ieee80211_tu_to_usec(
|
|
found->vif.bss_conf.beacon_int);
|
|
|
|
timeout = local->dynamic_ps_forced_timeout;
|
|
if (timeout < 0) {
|
|
/*
|
|
* Go to full PSM if the user configures a very low
|
|
* latency requirement.
|
|
* The 2000 second value is there for compatibility
|
|
* until the PM_QOS_NETWORK_LATENCY is configured
|
|
* with real values.
|
|
*/
|
|
if (latency > (1900 * USEC_PER_MSEC) &&
|
|
latency != (2000 * USEC_PER_SEC))
|
|
timeout = 0;
|
|
else
|
|
timeout = 100;
|
|
}
|
|
local->hw.conf.dynamic_ps_timeout = timeout;
|
|
|
|
if (beaconint_us > latency) {
|
|
local->ps_sdata = NULL;
|
|
} else {
|
|
int maxslp = 1;
|
|
u8 dtimper = found->u.mgd.dtim_period;
|
|
|
|
/* If the TIM IE is invalid, pretend the value is 1 */
|
|
if (!dtimper)
|
|
dtimper = 1;
|
|
else if (dtimper > 1)
|
|
maxslp = min_t(int, dtimper,
|
|
latency / beaconint_us);
|
|
|
|
local->hw.conf.max_sleep_period = maxslp;
|
|
local->hw.conf.ps_dtim_period = dtimper;
|
|
local->ps_sdata = found;
|
|
}
|
|
} else {
|
|
local->ps_sdata = NULL;
|
|
}
|
|
|
|
ieee80211_change_ps(local);
|
|
}
|
|
|
|
void ieee80211_recalc_ps_vif(struct ieee80211_sub_if_data *sdata)
|
|
{
|
|
bool ps_allowed = ieee80211_powersave_allowed(sdata);
|
|
|
|
if (sdata->vif.bss_conf.ps != ps_allowed) {
|
|
sdata->vif.bss_conf.ps = ps_allowed;
|
|
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_PS);
|
|
}
|
|
}
|
|
|
|
void ieee80211_dynamic_ps_disable_work(struct work_struct *work)
|
|
{
|
|
struct ieee80211_local *local =
|
|
container_of(work, struct ieee80211_local,
|
|
dynamic_ps_disable_work);
|
|
|
|
if (local->hw.conf.flags & IEEE80211_CONF_PS) {
|
|
local->hw.conf.flags &= ~IEEE80211_CONF_PS;
|
|
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
|
|
}
|
|
|
|
ieee80211_wake_queues_by_reason(&local->hw,
|
|
IEEE80211_MAX_QUEUE_MAP,
|
|
IEEE80211_QUEUE_STOP_REASON_PS);
|
|
}
|
|
|
|
void ieee80211_dynamic_ps_enable_work(struct work_struct *work)
|
|
{
|
|
struct ieee80211_local *local =
|
|
container_of(work, struct ieee80211_local,
|
|
dynamic_ps_enable_work);
|
|
struct ieee80211_sub_if_data *sdata = local->ps_sdata;
|
|
struct ieee80211_if_managed *ifmgd;
|
|
unsigned long flags;
|
|
int q;
|
|
|
|
/* can only happen when PS was just disabled anyway */
|
|
if (!sdata)
|
|
return;
|
|
|
|
ifmgd = &sdata->u.mgd;
|
|
|
|
if (local->hw.conf.flags & IEEE80211_CONF_PS)
|
|
return;
|
|
|
|
if (local->hw.conf.dynamic_ps_timeout > 0) {
|
|
/* don't enter PS if TX frames are pending */
|
|
if (drv_tx_frames_pending(local)) {
|
|
mod_timer(&local->dynamic_ps_timer, jiffies +
|
|
msecs_to_jiffies(
|
|
local->hw.conf.dynamic_ps_timeout));
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* transmission can be stopped by others which leads to
|
|
* dynamic_ps_timer expiry. Postpone the ps timer if it
|
|
* is not the actual idle state.
|
|
*/
|
|
spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
|
|
for (q = 0; q < local->hw.queues; q++) {
|
|
if (local->queue_stop_reasons[q]) {
|
|
spin_unlock_irqrestore(&local->queue_stop_reason_lock,
|
|
flags);
|
|
mod_timer(&local->dynamic_ps_timer, jiffies +
|
|
msecs_to_jiffies(
|
|
local->hw.conf.dynamic_ps_timeout));
|
|
return;
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
|
|
}
|
|
|
|
if ((local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) &&
|
|
!(ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) {
|
|
if (drv_tx_frames_pending(local)) {
|
|
mod_timer(&local->dynamic_ps_timer, jiffies +
|
|
msecs_to_jiffies(
|
|
local->hw.conf.dynamic_ps_timeout));
|
|
} else {
|
|
ieee80211_send_nullfunc(local, sdata, 1);
|
|
/* Flush to get the tx status of nullfunc frame */
|
|
ieee80211_flush_queues(local, sdata);
|
|
}
|
|
}
|
|
|
|
if (!((local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) &&
|
|
(local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)) ||
|
|
(ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) {
|
|
ifmgd->flags &= ~IEEE80211_STA_NULLFUNC_ACKED;
|
|
local->hw.conf.flags |= IEEE80211_CONF_PS;
|
|
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
|
|
}
|
|
}
|
|
|
|
void ieee80211_dynamic_ps_timer(unsigned long data)
|
|
{
|
|
struct ieee80211_local *local = (void *) data;
|
|
|
|
if (local->quiescing || local->suspended)
|
|
return;
|
|
|
|
ieee80211_queue_work(&local->hw, &local->dynamic_ps_enable_work);
|
|
}
|
|
|
|
void ieee80211_dfs_cac_timer_work(struct work_struct *work)
|
|
{
|
|
struct delayed_work *delayed_work =
|
|
container_of(work, struct delayed_work, work);
|
|
struct ieee80211_sub_if_data *sdata =
|
|
container_of(delayed_work, struct ieee80211_sub_if_data,
|
|
dfs_cac_timer_work);
|
|
struct cfg80211_chan_def chandef = sdata->vif.bss_conf.chandef;
|
|
|
|
mutex_lock(&sdata->local->mtx);
|
|
if (sdata->wdev.cac_started) {
|
|
ieee80211_vif_release_channel(sdata);
|
|
cfg80211_cac_event(sdata->dev, &chandef,
|
|
NL80211_RADAR_CAC_FINISHED,
|
|
GFP_KERNEL);
|
|
}
|
|
mutex_unlock(&sdata->local->mtx);
|
|
}
|
|
|
|
/* MLME */
|
|
static bool ieee80211_sta_wmm_params(struct ieee80211_local *local,
|
|
struct ieee80211_sub_if_data *sdata,
|
|
const u8 *wmm_param, size_t wmm_param_len)
|
|
{
|
|
struct ieee80211_tx_queue_params params;
|
|
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
|
|
size_t left;
|
|
int count;
|
|
const u8 *pos;
|
|
u8 uapsd_queues = 0;
|
|
|
|
if (!local->ops->conf_tx)
|
|
return false;
|
|
|
|
if (local->hw.queues < IEEE80211_NUM_ACS)
|
|
return false;
|
|
|
|
if (!wmm_param)
|
|
return false;
|
|
|
|
if (wmm_param_len < 8 || wmm_param[5] /* version */ != 1)
|
|
return false;
|
|
|
|
if (ifmgd->flags & IEEE80211_STA_UAPSD_ENABLED)
|
|
uapsd_queues = ifmgd->uapsd_queues;
|
|
|
|
count = wmm_param[6] & 0x0f;
|
|
if (count == ifmgd->wmm_last_param_set)
|
|
return false;
|
|
ifmgd->wmm_last_param_set = count;
|
|
|
|
pos = wmm_param + 8;
|
|
left = wmm_param_len - 8;
|
|
|
|
memset(¶ms, 0, sizeof(params));
|
|
|
|
sdata->wmm_acm = 0;
|
|
for (; left >= 4; left -= 4, pos += 4) {
|
|
int aci = (pos[0] >> 5) & 0x03;
|
|
int acm = (pos[0] >> 4) & 0x01;
|
|
bool uapsd = false;
|
|
int queue;
|
|
|
|
switch (aci) {
|
|
case 1: /* AC_BK */
|
|
queue = 3;
|
|
if (acm)
|
|
sdata->wmm_acm |= BIT(1) | BIT(2); /* BK/- */
|
|
if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BK)
|
|
uapsd = true;
|
|
break;
|
|
case 2: /* AC_VI */
|
|
queue = 1;
|
|
if (acm)
|
|
sdata->wmm_acm |= BIT(4) | BIT(5); /* CL/VI */
|
|
if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VI)
|
|
uapsd = true;
|
|
break;
|
|
case 3: /* AC_VO */
|
|
queue = 0;
|
|
if (acm)
|
|
sdata->wmm_acm |= BIT(6) | BIT(7); /* VO/NC */
|
|
if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO)
|
|
uapsd = true;
|
|
break;
|
|
case 0: /* AC_BE */
|
|
default:
|
|
queue = 2;
|
|
if (acm)
|
|
sdata->wmm_acm |= BIT(0) | BIT(3); /* BE/EE */
|
|
if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BE)
|
|
uapsd = true;
|
|
break;
|
|
}
|
|
|
|
params.aifs = pos[0] & 0x0f;
|
|
params.cw_max = ecw2cw((pos[1] & 0xf0) >> 4);
|
|
params.cw_min = ecw2cw(pos[1] & 0x0f);
|
|
params.txop = get_unaligned_le16(pos + 2);
|
|
params.acm = acm;
|
|
params.uapsd = uapsd;
|
|
|
|
mlme_dbg(sdata,
|
|
"WMM queue=%d aci=%d acm=%d aifs=%d cWmin=%d cWmax=%d txop=%d uapsd=%d\n",
|
|
queue, aci, acm,
|
|
params.aifs, params.cw_min, params.cw_max,
|
|
params.txop, params.uapsd);
|
|
sdata->tx_conf[queue] = params;
|
|
if (drv_conf_tx(local, sdata, queue, ¶ms))
|
|
sdata_err(sdata,
|
|
"failed to set TX queue parameters for queue %d\n",
|
|
queue);
|
|
}
|
|
|
|
/* enable WMM or activate new settings */
|
|
sdata->vif.bss_conf.qos = true;
|
|
return true;
|
|
}
|
|
|
|
static void __ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata)
|
|
{
|
|
lockdep_assert_held(&sdata->local->mtx);
|
|
|
|
sdata->u.mgd.flags &= ~IEEE80211_STA_CONNECTION_POLL;
|
|
ieee80211_run_deferred_scan(sdata->local);
|
|
}
|
|
|
|
static void ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata)
|
|
{
|
|
mutex_lock(&sdata->local->mtx);
|
|
__ieee80211_stop_poll(sdata);
|
|
mutex_unlock(&sdata->local->mtx);
|
|
}
|
|
|
|
static u32 ieee80211_handle_bss_capability(struct ieee80211_sub_if_data *sdata,
|
|
u16 capab, bool erp_valid, u8 erp)
|
|
{
|
|
struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
|
|
u32 changed = 0;
|
|
bool use_protection;
|
|
bool use_short_preamble;
|
|
bool use_short_slot;
|
|
|
|
if (erp_valid) {
|
|
use_protection = (erp & WLAN_ERP_USE_PROTECTION) != 0;
|
|
use_short_preamble = (erp & WLAN_ERP_BARKER_PREAMBLE) == 0;
|
|
} else {
|
|
use_protection = false;
|
|
use_short_preamble = !!(capab & WLAN_CAPABILITY_SHORT_PREAMBLE);
|
|
}
|
|
|
|
use_short_slot = !!(capab & WLAN_CAPABILITY_SHORT_SLOT_TIME);
|
|
if (ieee80211_get_sdata_band(sdata) == IEEE80211_BAND_5GHZ)
|
|
use_short_slot = true;
|
|
|
|
if (use_protection != bss_conf->use_cts_prot) {
|
|
bss_conf->use_cts_prot = use_protection;
|
|
changed |= BSS_CHANGED_ERP_CTS_PROT;
|
|
}
|
|
|
|
if (use_short_preamble != bss_conf->use_short_preamble) {
|
|
bss_conf->use_short_preamble = use_short_preamble;
|
|
changed |= BSS_CHANGED_ERP_PREAMBLE;
|
|
}
|
|
|
|
if (use_short_slot != bss_conf->use_short_slot) {
|
|
bss_conf->use_short_slot = use_short_slot;
|
|
changed |= BSS_CHANGED_ERP_SLOT;
|
|
}
|
|
|
|
return changed;
|
|
}
|
|
|
|
static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
|
|
struct cfg80211_bss *cbss,
|
|
u32 bss_info_changed)
|
|
{
|
|
struct ieee80211_bss *bss = (void *)cbss->priv;
|
|
struct ieee80211_local *local = sdata->local;
|
|
struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
|
|
|
|
bss_info_changed |= BSS_CHANGED_ASSOC;
|
|
bss_info_changed |= ieee80211_handle_bss_capability(sdata,
|
|
bss_conf->assoc_capability, bss->has_erp_value, bss->erp_value);
|
|
|
|
sdata->u.mgd.beacon_timeout = usecs_to_jiffies(ieee80211_tu_to_usec(
|
|
beacon_loss_count * bss_conf->beacon_int));
|
|
|
|
sdata->u.mgd.associated = cbss;
|
|
memcpy(sdata->u.mgd.bssid, cbss->bssid, ETH_ALEN);
|
|
|
|
sdata->u.mgd.flags |= IEEE80211_STA_RESET_SIGNAL_AVE;
|
|
|
|
if (sdata->vif.p2p) {
|
|
const struct cfg80211_bss_ies *ies;
|
|
|
|
rcu_read_lock();
|
|
ies = rcu_dereference(cbss->ies);
|
|
if (ies) {
|
|
int ret;
|
|
|
|
ret = cfg80211_get_p2p_attr(
|
|
ies->data, ies->len,
|
|
IEEE80211_P2P_ATTR_ABSENCE_NOTICE,
|
|
(u8 *) &bss_conf->p2p_noa_attr,
|
|
sizeof(bss_conf->p2p_noa_attr));
|
|
if (ret >= 2) {
|
|
sdata->u.mgd.p2p_noa_index =
|
|
bss_conf->p2p_noa_attr.index;
|
|
bss_info_changed |= BSS_CHANGED_P2P_PS;
|
|
}
|
|
}
|
|
rcu_read_unlock();
|
|
}
|
|
|
|
/* just to be sure */
|
|
ieee80211_stop_poll(sdata);
|
|
|
|
ieee80211_led_assoc(local, 1);
|
|
|
|
if (sdata->u.mgd.have_beacon) {
|
|
/*
|
|
* If the AP is buggy we may get here with no DTIM period
|
|
* known, so assume it's 1 which is the only safe assumption
|
|
* in that case, although if the TIM IE is broken powersave
|
|
* probably just won't work at all.
|
|
*/
|
|
bss_conf->dtim_period = sdata->u.mgd.dtim_period ?: 1;
|
|
bss_conf->beacon_rate = bss->beacon_rate;
|
|
bss_info_changed |= BSS_CHANGED_BEACON_INFO;
|
|
} else {
|
|
bss_conf->beacon_rate = NULL;
|
|
bss_conf->dtim_period = 0;
|
|
}
|
|
|
|
bss_conf->assoc = 1;
|
|
|
|
/* Tell the driver to monitor connection quality (if supported) */
|
|
if (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI &&
|
|
bss_conf->cqm_rssi_thold)
|
|
bss_info_changed |= BSS_CHANGED_CQM;
|
|
|
|
/* Enable ARP filtering */
|
|
if (bss_conf->arp_addr_cnt)
|
|
bss_info_changed |= BSS_CHANGED_ARP_FILTER;
|
|
|
|
ieee80211_bss_info_change_notify(sdata, bss_info_changed);
|
|
|
|
mutex_lock(&local->iflist_mtx);
|
|
ieee80211_recalc_ps(local, -1);
|
|
mutex_unlock(&local->iflist_mtx);
|
|
|
|
ieee80211_recalc_smps(sdata);
|
|
ieee80211_recalc_ps_vif(sdata);
|
|
|
|
netif_carrier_on(sdata->dev);
|
|
}
|
|
|
|
static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
|
|
u16 stype, u16 reason, bool tx,
|
|
u8 *frame_buf)
|
|
{
|
|
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
|
|
struct ieee80211_local *local = sdata->local;
|
|
u32 changed = 0;
|
|
|
|
sdata_assert_lock(sdata);
|
|
|
|
if (WARN_ON_ONCE(tx && !frame_buf))
|
|
return;
|
|
|
|
if (WARN_ON(!ifmgd->associated))
|
|
return;
|
|
|
|
ieee80211_stop_poll(sdata);
|
|
|
|
ifmgd->associated = NULL;
|
|
netif_carrier_off(sdata->dev);
|
|
|
|
/*
|
|
* if we want to get out of ps before disassoc (why?) we have
|
|
* to do it before sending disassoc, as otherwise the null-packet
|
|
* won't be valid.
|
|
*/
|
|
if (local->hw.conf.flags & IEEE80211_CONF_PS) {
|
|
local->hw.conf.flags &= ~IEEE80211_CONF_PS;
|
|
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
|
|
}
|
|
local->ps_sdata = NULL;
|
|
|
|
/* disable per-vif ps */
|
|
ieee80211_recalc_ps_vif(sdata);
|
|
|
|
/* flush out any pending frame (e.g. DELBA) before deauth/disassoc */
|
|
if (tx)
|
|
ieee80211_flush_queues(local, sdata);
|
|
|
|
/* deauthenticate/disassociate now */
|
|
if (tx || frame_buf)
|
|
ieee80211_send_deauth_disassoc(sdata, ifmgd->bssid, stype,
|
|
reason, tx, frame_buf);
|
|
|
|
/* flush out frame */
|
|
if (tx)
|
|
ieee80211_flush_queues(local, sdata);
|
|
|
|
/* clear bssid only after building the needed mgmt frames */
|
|
memset(ifmgd->bssid, 0, ETH_ALEN);
|
|
|
|
/* remove AP and TDLS peers */
|
|
sta_info_flush(sdata);
|
|
|
|
/* finally reset all BSS / config parameters */
|
|
changed |= ieee80211_reset_erp_info(sdata);
|
|
|
|
ieee80211_led_assoc(local, 0);
|
|
changed |= BSS_CHANGED_ASSOC;
|
|
sdata->vif.bss_conf.assoc = false;
|
|
|
|
ifmgd->p2p_noa_index = -1;
|
|
memset(&sdata->vif.bss_conf.p2p_noa_attr, 0,
|
|
sizeof(sdata->vif.bss_conf.p2p_noa_attr));
|
|
|
|
/* on the next assoc, re-program HT/VHT parameters */
|
|
memset(&ifmgd->ht_capa, 0, sizeof(ifmgd->ht_capa));
|
|
memset(&ifmgd->ht_capa_mask, 0, sizeof(ifmgd->ht_capa_mask));
|
|
memset(&ifmgd->vht_capa, 0, sizeof(ifmgd->vht_capa));
|
|
memset(&ifmgd->vht_capa_mask, 0, sizeof(ifmgd->vht_capa_mask));
|
|
|
|
sdata->ap_power_level = IEEE80211_UNSET_POWER_LEVEL;
|
|
|
|
del_timer_sync(&local->dynamic_ps_timer);
|
|
cancel_work_sync(&local->dynamic_ps_enable_work);
|
|
|
|
/* Disable ARP filtering */
|
|
if (sdata->vif.bss_conf.arp_addr_cnt)
|
|
changed |= BSS_CHANGED_ARP_FILTER;
|
|
|
|
sdata->vif.bss_conf.qos = false;
|
|
changed |= BSS_CHANGED_QOS;
|
|
|
|
/* The BSSID (not really interesting) and HT changed */
|
|
changed |= BSS_CHANGED_BSSID | BSS_CHANGED_HT;
|
|
ieee80211_bss_info_change_notify(sdata, changed);
|
|
|
|
/* disassociated - set to defaults now */
|
|
ieee80211_set_wmm_default(sdata, false);
|
|
|
|
del_timer_sync(&sdata->u.mgd.conn_mon_timer);
|
|
del_timer_sync(&sdata->u.mgd.bcn_mon_timer);
|
|
del_timer_sync(&sdata->u.mgd.timer);
|
|
del_timer_sync(&sdata->u.mgd.chswitch_timer);
|
|
|
|
sdata->vif.bss_conf.dtim_period = 0;
|
|
sdata->vif.bss_conf.beacon_rate = NULL;
|
|
|
|
ifmgd->have_beacon = false;
|
|
|
|
ifmgd->flags = 0;
|
|
mutex_lock(&local->mtx);
|
|
ieee80211_vif_release_channel(sdata);
|
|
mutex_unlock(&local->mtx);
|
|
|
|
sdata->encrypt_headroom = IEEE80211_ENCRYPT_HEADROOM;
|
|
}
|
|
|
|
void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data *sdata,
|
|
struct ieee80211_hdr *hdr)
|
|
{
|
|
/*
|
|
* We can postpone the mgd.timer whenever receiving unicast frames
|
|
* from AP because we know that the connection is working both ways
|
|
* at that time. But multicast frames (and hence also beacons) must
|
|
* be ignored here, because we need to trigger the timer during
|
|
* data idle periods for sending the periodic probe request to the
|
|
* AP we're connected to.
|
|
*/
|
|
if (is_multicast_ether_addr(hdr->addr1))
|
|
return;
|
|
|
|
ieee80211_sta_reset_conn_monitor(sdata);
|
|
}
|
|
|
|
static void ieee80211_reset_ap_probe(struct ieee80211_sub_if_data *sdata)
|
|
{
|
|
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
|
|
struct ieee80211_local *local = sdata->local;
|
|
|
|
mutex_lock(&local->mtx);
|
|
if (!(ifmgd->flags & IEEE80211_STA_CONNECTION_POLL))
|
|
goto out;
|
|
|
|
__ieee80211_stop_poll(sdata);
|
|
|
|
mutex_lock(&local->iflist_mtx);
|
|
ieee80211_recalc_ps(local, -1);
|
|
mutex_unlock(&local->iflist_mtx);
|
|
|
|
if (sdata->local->hw.flags & IEEE80211_HW_CONNECTION_MONITOR)
|
|
goto out;
|
|
|
|
/*
|
|
* We've received a probe response, but are not sure whether
|
|
* we have or will be receiving any beacons or data, so let's
|
|
* schedule the timers again, just in case.
|
|
*/
|
|
ieee80211_sta_reset_beacon_monitor(sdata);
|
|
|
|
mod_timer(&ifmgd->conn_mon_timer,
|
|
round_jiffies_up(jiffies +
|
|
IEEE80211_CONNECTION_IDLE_TIME));
|
|
out:
|
|
mutex_unlock(&local->mtx);
|
|
}
|
|
|
|
void ieee80211_sta_tx_notify(struct ieee80211_sub_if_data *sdata,
|
|
struct ieee80211_hdr *hdr, bool ack)
|
|
{
|
|
if (!ieee80211_is_data(hdr->frame_control))
|
|
return;
|
|
|
|
if (ieee80211_is_nullfunc(hdr->frame_control) &&
|
|
sdata->u.mgd.probe_send_count > 0) {
|
|
if (ack)
|
|
ieee80211_sta_reset_conn_monitor(sdata);
|
|
else
|
|
sdata->u.mgd.nullfunc_failed = true;
|
|
ieee80211_queue_work(&sdata->local->hw, &sdata->work);
|
|
return;
|
|
}
|
|
|
|
if (ack)
|
|
ieee80211_sta_reset_conn_monitor(sdata);
|
|
}
|
|
|
|
static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data *sdata)
|
|
{
|
|
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
|
|
const u8 *ssid;
|
|
u8 *dst = ifmgd->associated->bssid;
|
|
u8 unicast_limit = max(1, max_probe_tries - 3);
|
|
|
|
/*
|
|
* Try sending broadcast probe requests for the last three
|
|
* probe requests after the first ones failed since some
|
|
* buggy APs only support broadcast probe requests.
|
|
*/
|
|
if (ifmgd->probe_send_count >= unicast_limit)
|
|
dst = NULL;
|
|
|
|
/*
|
|
* When the hardware reports an accurate Tx ACK status, it's
|
|
* better to send a nullfunc frame instead of a probe request,
|
|
* as it will kick us off the AP quickly if we aren't associated
|
|
* anymore. The timeout will be reset if the frame is ACKed by
|
|
* the AP.
|
|
*/
|
|
ifmgd->probe_send_count++;
|
|
|
|
if (sdata->local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) {
|
|
ifmgd->nullfunc_failed = false;
|
|
ieee80211_send_nullfunc(sdata->local, sdata, 0);
|
|
} else {
|
|
int ssid_len;
|
|
|
|
rcu_read_lock();
|
|
ssid = ieee80211_bss_get_ie(ifmgd->associated, WLAN_EID_SSID);
|
|
if (WARN_ON_ONCE(ssid == NULL))
|
|
ssid_len = 0;
|
|
else
|
|
ssid_len = ssid[1];
|
|
|
|
ieee80211_send_probe_req(sdata, dst, ssid + 2, ssid_len, NULL,
|
|
0, (u32) -1, true, 0,
|
|
ifmgd->associated->channel, false);
|
|
rcu_read_unlock();
|
|
}
|
|
|
|
ifmgd->probe_timeout = jiffies + msecs_to_jiffies(probe_wait_ms);
|
|
run_again(sdata, ifmgd->probe_timeout);
|
|
if (sdata->local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)
|
|
ieee80211_flush_queues(sdata->local, sdata);
|
|
}
|
|
|
|
static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata,
|
|
bool beacon)
|
|
{
|
|
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
|
|
bool already = false;
|
|
|
|
if (!ieee80211_sdata_running(sdata))
|
|
return;
|
|
|
|
sdata_lock(sdata);
|
|
|
|
if (!ifmgd->associated)
|
|
goto out;
|
|
|
|
mutex_lock(&sdata->local->mtx);
|
|
|
|
if (sdata->local->tmp_channel || sdata->local->scanning) {
|
|
mutex_unlock(&sdata->local->mtx);
|
|
goto out;
|
|
}
|
|
|
|
if (beacon) {
|
|
mlme_dbg_ratelimited(sdata,
|
|
"detected beacon loss from AP (missed %d beacons) - probing\n",
|
|
beacon_loss_count);
|
|
|
|
ieee80211_cqm_rssi_notify(&sdata->vif,
|
|
NL80211_CQM_RSSI_BEACON_LOSS_EVENT,
|
|
GFP_KERNEL);
|
|
}
|
|
|
|
/*
|
|
* The driver/our work has already reported this event or the
|
|
* connection monitoring has kicked in and we have already sent
|
|
* a probe request. Or maybe the AP died and the driver keeps
|
|
* reporting until we disassociate...
|
|
*
|
|
* In either case we have to ignore the current call to this
|
|
* function (except for setting the correct probe reason bit)
|
|
* because otherwise we would reset the timer every time and
|
|
* never check whether we received a probe response!
|
|
*/
|
|
if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL)
|
|
already = true;
|
|
|
|
ifmgd->flags |= IEEE80211_STA_CONNECTION_POLL;
|
|
|
|
mutex_unlock(&sdata->local->mtx);
|
|
|
|
if (already)
|
|
goto out;
|
|
|
|
mutex_lock(&sdata->local->iflist_mtx);
|
|
ieee80211_recalc_ps(sdata->local, -1);
|
|
mutex_unlock(&sdata->local->iflist_mtx);
|
|
|
|
ifmgd->probe_send_count = 0;
|
|
ieee80211_mgd_probe_ap_send(sdata);
|
|
out:
|
|
sdata_unlock(sdata);
|
|
}
|
|
|
|
struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw,
|
|
struct ieee80211_vif *vif)
|
|
{
|
|
struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
|
|
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
|
|
struct cfg80211_bss *cbss;
|
|
struct sk_buff *skb;
|
|
const u8 *ssid;
|
|
int ssid_len;
|
|
|
|
if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
|
|
return NULL;
|
|
|
|
sdata_assert_lock(sdata);
|
|
|
|
if (ifmgd->associated)
|
|
cbss = ifmgd->associated;
|
|
else if (ifmgd->auth_data)
|
|
cbss = ifmgd->auth_data->bss;
|
|
else if (ifmgd->assoc_data)
|
|
cbss = ifmgd->assoc_data->bss;
|
|
else
|
|
return NULL;
|
|
|
|
rcu_read_lock();
|
|
ssid = ieee80211_bss_get_ie(cbss, WLAN_EID_SSID);
|
|
if (WARN_ON_ONCE(ssid == NULL))
|
|
ssid_len = 0;
|
|
else
|
|
ssid_len = ssid[1];
|
|
|
|
skb = ieee80211_build_probe_req(sdata, cbss->bssid,
|
|
(u32) -1, cbss->channel,
|
|
ssid + 2, ssid_len,
|
|
NULL, 0, true);
|
|
rcu_read_unlock();
|
|
|
|
return skb;
|
|
}
|
|
EXPORT_SYMBOL(ieee80211_ap_probereq_get);
|
|
|
|
static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata)
|
|
{
|
|
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
|
|
u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
|
|
|
|
sdata_lock(sdata);
|
|
if (!ifmgd->associated) {
|
|
sdata_unlock(sdata);
|
|
return;
|
|
}
|
|
|
|
ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
|
|
WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
|
|
true, frame_buf);
|
|
ifmgd->flags &= ~IEEE80211_STA_CSA_RECEIVED;
|
|
sdata->vif.csa_active = false;
|
|
ieee80211_wake_queues_by_reason(&sdata->local->hw,
|
|
IEEE80211_MAX_QUEUE_MAP,
|
|
IEEE80211_QUEUE_STOP_REASON_CSA);
|
|
|
|
cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf,
|
|
IEEE80211_DEAUTH_FRAME_LEN);
|
|
sdata_unlock(sdata);
|
|
}
|
|
|
|
static void ieee80211_beacon_connection_loss_work(struct work_struct *work)
|
|
{
|
|
struct ieee80211_sub_if_data *sdata =
|
|
container_of(work, struct ieee80211_sub_if_data,
|
|
u.mgd.beacon_connection_loss_work);
|
|
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
|
|
struct sta_info *sta;
|
|
|
|
if (ifmgd->associated) {
|
|
rcu_read_lock();
|
|
sta = sta_info_get(sdata, ifmgd->bssid);
|
|
if (sta)
|
|
sta->beacon_loss_count++;
|
|
rcu_read_unlock();
|
|
}
|
|
|
|
if (ifmgd->connection_loss) {
|
|
sdata_info(sdata, "Connection to AP %pM lost\n",
|
|
ifmgd->bssid);
|
|
__ieee80211_disconnect(sdata);
|
|
} else {
|
|
ieee80211_mgd_probe_ap(sdata, true);
|
|
}
|
|
}
|
|
|
|
static void ieee80211_csa_connection_drop_work(struct work_struct *work)
|
|
{
|
|
struct ieee80211_sub_if_data *sdata =
|
|
container_of(work, struct ieee80211_sub_if_data,
|
|
u.mgd.csa_connection_drop_work);
|
|
|
|
__ieee80211_disconnect(sdata);
|
|
}
|
|
|
|
void ieee80211_beacon_loss(struct ieee80211_vif *vif)
|
|
{
|
|
struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
|
|
struct ieee80211_hw *hw = &sdata->local->hw;
|
|
|
|
trace_api_beacon_loss(sdata);
|
|
|
|
sdata->u.mgd.connection_loss = false;
|
|
ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work);
|
|
}
|
|
EXPORT_SYMBOL(ieee80211_beacon_loss);
|
|
|
|
void ieee80211_connection_loss(struct ieee80211_vif *vif)
|
|
{
|
|
struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
|
|
struct ieee80211_hw *hw = &sdata->local->hw;
|
|
|
|
trace_api_connection_loss(sdata);
|
|
|
|
sdata->u.mgd.connection_loss = true;
|
|
ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work);
|
|
}
|
|
EXPORT_SYMBOL(ieee80211_connection_loss);
|
|
|
|
|
|
static void ieee80211_destroy_auth_data(struct ieee80211_sub_if_data *sdata,
|
|
bool assoc)
|
|
{
|
|
struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data;
|
|
|
|
sdata_assert_lock(sdata);
|
|
|
|
if (!assoc) {
|
|
sta_info_destroy_addr(sdata, auth_data->bss->bssid);
|
|
|
|
memset(sdata->u.mgd.bssid, 0, ETH_ALEN);
|
|
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
|
|
sdata->u.mgd.flags = 0;
|
|
mutex_lock(&sdata->local->mtx);
|
|
ieee80211_vif_release_channel(sdata);
|
|
mutex_unlock(&sdata->local->mtx);
|
|
}
|
|
|
|
cfg80211_put_bss(sdata->local->hw.wiphy, auth_data->bss);
|
|
kfree(auth_data);
|
|
sdata->u.mgd.auth_data = NULL;
|
|
}
|
|
|
|
static void ieee80211_auth_challenge(struct ieee80211_sub_if_data *sdata,
|
|
struct ieee80211_mgmt *mgmt, size_t len)
|
|
{
|
|
struct ieee80211_local *local = sdata->local;
|
|
struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data;
|
|
u8 *pos;
|
|
struct ieee802_11_elems elems;
|
|
u32 tx_flags = 0;
|
|
|
|
pos = mgmt->u.auth.variable;
|
|
ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), false, &elems);
|
|
if (!elems.challenge)
|
|
return;
|
|
auth_data->expected_transaction = 4;
|
|
drv_mgd_prepare_tx(sdata->local, sdata);
|
|
if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)
|
|
tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS |
|
|
IEEE80211_TX_INTFL_MLME_CONN_TX;
|
|
ieee80211_send_auth(sdata, 3, auth_data->algorithm, 0,
|
|
elems.challenge - 2, elems.challenge_len + 2,
|
|
auth_data->bss->bssid, auth_data->bss->bssid,
|
|
auth_data->key, auth_data->key_len,
|
|
auth_data->key_idx, tx_flags);
|
|
}
|
|
|
|
static void ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata,
|
|
struct ieee80211_mgmt *mgmt, size_t len)
|
|
{
|
|
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
|
|
u8 bssid[ETH_ALEN];
|
|
u16 auth_alg, auth_transaction, status_code;
|
|
struct sta_info *sta;
|
|
|
|
sdata_assert_lock(sdata);
|
|
|
|
if (len < 24 + 6)
|
|
return;
|
|
|
|
if (!ifmgd->auth_data || ifmgd->auth_data->done)
|
|
return;
|
|
|
|
memcpy(bssid, ifmgd->auth_data->bss->bssid, ETH_ALEN);
|
|
|
|
if (!ether_addr_equal(bssid, mgmt->bssid))
|
|
return;
|
|
|
|
auth_alg = le16_to_cpu(mgmt->u.auth.auth_alg);
|
|
auth_transaction = le16_to_cpu(mgmt->u.auth.auth_transaction);
|
|
status_code = le16_to_cpu(mgmt->u.auth.status_code);
|
|
|
|
if (auth_alg != ifmgd->auth_data->algorithm ||
|
|
auth_transaction != ifmgd->auth_data->expected_transaction) {
|
|
sdata_info(sdata, "%pM unexpected authentication state: alg %d (expected %d) transact %d (expected %d)\n",
|
|
mgmt->sa, auth_alg, ifmgd->auth_data->algorithm,
|
|
auth_transaction,
|
|
ifmgd->auth_data->expected_transaction);
|
|
return;
|
|
}
|
|
|
|
if (status_code != WLAN_STATUS_SUCCESS) {
|
|
sdata_info(sdata, "%pM denied authentication (status %d)\n",
|
|
mgmt->sa, status_code);
|
|
ieee80211_destroy_auth_data(sdata, false);
|
|
cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
|
|
return;
|
|
}
|
|
|
|
switch (ifmgd->auth_data->algorithm) {
|
|
case WLAN_AUTH_OPEN:
|
|
case WLAN_AUTH_LEAP:
|
|
case WLAN_AUTH_FT:
|
|
case WLAN_AUTH_SAE:
|
|
break;
|
|
case WLAN_AUTH_SHARED_KEY:
|
|
if (ifmgd->auth_data->expected_transaction != 4) {
|
|
ieee80211_auth_challenge(sdata, mgmt, len);
|
|
/* need another frame */
|
|
return;
|
|
}
|
|
break;
|
|
default:
|
|
WARN_ONCE(1, "invalid auth alg %d",
|
|
ifmgd->auth_data->algorithm);
|
|
return;
|
|
}
|
|
|
|
sdata_info(sdata, "authenticated\n");
|
|
ifmgd->auth_data->done = true;
|
|
ifmgd->auth_data->timeout = jiffies + IEEE80211_AUTH_WAIT_ASSOC;
|
|
ifmgd->auth_data->timeout_started = true;
|
|
run_again(sdata, ifmgd->auth_data->timeout);
|
|
|
|
if (ifmgd->auth_data->algorithm == WLAN_AUTH_SAE &&
|
|
ifmgd->auth_data->expected_transaction != 2) {
|
|
/*
|
|
* Report auth frame to user space for processing since another
|
|
* round of Authentication frames is still needed.
|
|
*/
|
|
cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
|
|
return;
|
|
}
|
|
|
|
/* move station state to auth */
|
|
mutex_lock(&sdata->local->sta_mtx);
|
|
sta = sta_info_get(sdata, bssid);
|
|
if (!sta) {
|
|
WARN_ONCE(1, "%s: STA %pM not found", sdata->name, bssid);
|
|
goto out_err;
|
|
}
|
|
if (sta_info_move_state(sta, IEEE80211_STA_AUTH)) {
|
|
sdata_info(sdata, "failed moving %pM to auth\n", bssid);
|
|
goto out_err;
|
|
}
|
|
mutex_unlock(&sdata->local->sta_mtx);
|
|
|
|
cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
|
|
return;
|
|
out_err:
|
|
mutex_unlock(&sdata->local->sta_mtx);
|
|
/* ignore frame -- wait for timeout */
|
|
}
|
|
|
|
|
|
static void ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata,
|
|
struct ieee80211_mgmt *mgmt, size_t len)
|
|
{
|
|
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
|
|
const u8 *bssid = NULL;
|
|
u16 reason_code;
|
|
|
|
sdata_assert_lock(sdata);
|
|
|
|
if (len < 24 + 2)
|
|
return;
|
|
|
|
if (!ifmgd->associated ||
|
|
!ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid))
|
|
return;
|
|
|
|
bssid = ifmgd->associated->bssid;
|
|
|
|
reason_code = le16_to_cpu(mgmt->u.deauth.reason_code);
|
|
|
|
sdata_info(sdata, "deauthenticated from %pM (Reason: %u)\n",
|
|
bssid, reason_code);
|
|
|
|
ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
|
|
|
|
cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
|
|
}
|
|
|
|
|
|
static void ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata,
|
|
struct ieee80211_mgmt *mgmt, size_t len)
|
|
{
|
|
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
|
|
u16 reason_code;
|
|
|
|
sdata_assert_lock(sdata);
|
|
|
|
if (len < 24 + 2)
|
|
return;
|
|
|
|
if (!ifmgd->associated ||
|
|
!ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid))
|
|
return;
|
|
|
|
reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code);
|
|
|
|
sdata_info(sdata, "disassociated from %pM (Reason: %u)\n",
|
|
mgmt->sa, reason_code);
|
|
|
|
ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
|
|
|
|
cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
|
|
}
|
|
|
|
static void ieee80211_get_rates(struct ieee80211_supported_band *sband,
|
|
u8 *supp_rates, unsigned int supp_rates_len,
|
|
u32 *rates, u32 *basic_rates,
|
|
bool *have_higher_than_11mbit,
|
|
int *min_rate, int *min_rate_index,
|
|
int shift, u32 rate_flags)
|
|
{
|
|
int i, j;
|
|
|
|
for (i = 0; i < supp_rates_len; i++) {
|
|
int rate = supp_rates[i] & 0x7f;
|
|
bool is_basic = !!(supp_rates[i] & 0x80);
|
|
|
|
if ((rate * 5 * (1 << shift)) > 110)
|
|
*have_higher_than_11mbit = true;
|
|
|
|
/*
|
|
* BSS_MEMBERSHIP_SELECTOR_HT_PHY is defined in 802.11n-2009
|
|
* 7.3.2.2 as a magic value instead of a rate. Hence, skip it.
|
|
*
|
|
* Note: Even through the membership selector and the basic
|
|
* rate flag share the same bit, they are not exactly
|
|
* the same.
|
|
*/
|
|
if (!!(supp_rates[i] & 0x80) &&
|
|
(supp_rates[i] & 0x7f) == BSS_MEMBERSHIP_SELECTOR_HT_PHY)
|
|
continue;
|
|
|
|
for (j = 0; j < sband->n_bitrates; j++) {
|
|
struct ieee80211_rate *br;
|
|
int brate;
|
|
|
|
br = &sband->bitrates[j];
|
|
if ((rate_flags & br->flags) != rate_flags)
|
|
continue;
|
|
|
|
brate = DIV_ROUND_UP(br->bitrate, (1 << shift) * 5);
|
|
if (brate == rate) {
|
|
*rates |= BIT(j);
|
|
if (is_basic)
|
|
*basic_rates |= BIT(j);
|
|
if ((rate * 5) < *min_rate) {
|
|
*min_rate = rate * 5;
|
|
*min_rate_index = j;
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static void ieee80211_destroy_assoc_data(struct ieee80211_sub_if_data *sdata,
|
|
bool assoc)
|
|
{
|
|
struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data;
|
|
|
|
sdata_assert_lock(sdata);
|
|
|
|
if (!assoc) {
|
|
sta_info_destroy_addr(sdata, assoc_data->bss->bssid);
|
|
|
|
memset(sdata->u.mgd.bssid, 0, ETH_ALEN);
|
|
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
|
|
sdata->u.mgd.flags = 0;
|
|
mutex_lock(&sdata->local->mtx);
|
|
ieee80211_vif_release_channel(sdata);
|
|
mutex_unlock(&sdata->local->mtx);
|
|
}
|
|
|
|
kfree(assoc_data);
|
|
sdata->u.mgd.assoc_data = NULL;
|
|
}
|
|
|
|
static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
|
|
struct cfg80211_bss *cbss,
|
|
struct ieee80211_mgmt *mgmt, size_t len)
|
|
{
|
|
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
|
|
struct ieee80211_local *local = sdata->local;
|
|
struct ieee80211_supported_band *sband;
|
|
struct sta_info *sta;
|
|
u8 *pos;
|
|
u16 capab_info, aid;
|
|
struct ieee802_11_elems elems;
|
|
struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
|
|
const struct cfg80211_bss_ies *bss_ies = NULL;
|
|
struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
|
|
u32 changed = 0;
|
|
int err;
|
|
bool ret;
|
|
|
|
/* AssocResp and ReassocResp have identical structure */
|
|
|
|
aid = le16_to_cpu(mgmt->u.assoc_resp.aid);
|
|
capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
|
|
|
|
if ((aid & (BIT(15) | BIT(14))) != (BIT(15) | BIT(14)))
|
|
sdata_info(sdata, "invalid AID value 0x%x; bits 15:14 not set\n",
|
|
aid);
|
|
aid &= ~(BIT(15) | BIT(14));
|
|
|
|
ifmgd->broken_ap = false;
|
|
|
|
if (aid == 0 || aid > IEEE80211_MAX_AID) {
|
|
sdata_info(sdata, "invalid AID value %d (out of range), turn off PS\n",
|
|
aid);
|
|
aid = 0;
|
|
ifmgd->broken_ap = true;
|
|
}
|
|
|
|
pos = mgmt->u.assoc_resp.variable;
|
|
ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), false, &elems);
|
|
|
|
if (!elems.supp_rates) {
|
|
sdata_info(sdata, "no SuppRates element in AssocResp\n");
|
|
return false;
|
|
}
|
|
|
|
ifmgd->aid = aid;
|
|
|
|
/*
|
|
* Some APs are erroneously not including some information in their
|
|
* (re)association response frames. Try to recover by using the data
|
|
* from the beacon or probe response. This seems to afflict mobile
|
|
* 2G/3G/4G wifi routers, reported models include the "Onda PN51T",
|
|
* "Vodafone PocketWiFi 2", "ZTE MF60" and a similar T-Mobile device.
|
|
*/
|
|
if ((assoc_data->wmm && !elems.wmm_param) ||
|
|
(!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
|
|
(!elems.ht_cap_elem || !elems.ht_operation)) ||
|
|
(!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
|
|
(!elems.vht_cap_elem || !elems.vht_operation))) {
|
|
const struct cfg80211_bss_ies *ies;
|
|
struct ieee802_11_elems bss_elems;
|
|
|
|
rcu_read_lock();
|
|
ies = rcu_dereference(cbss->ies);
|
|
if (ies)
|
|
bss_ies = kmemdup(ies, sizeof(*ies) + ies->len,
|
|
GFP_ATOMIC);
|
|
rcu_read_unlock();
|
|
if (!bss_ies)
|
|
return false;
|
|
|
|
ieee802_11_parse_elems(bss_ies->data, bss_ies->len,
|
|
false, &bss_elems);
|
|
if (assoc_data->wmm &&
|
|
!elems.wmm_param && bss_elems.wmm_param) {
|
|
elems.wmm_param = bss_elems.wmm_param;
|
|
sdata_info(sdata,
|
|
"AP bug: WMM param missing from AssocResp\n");
|
|
}
|
|
|
|
/*
|
|
* Also check if we requested HT/VHT, otherwise the AP doesn't
|
|
* have to include the IEs in the (re)association response.
|
|
*/
|
|
if (!elems.ht_cap_elem && bss_elems.ht_cap_elem &&
|
|
!(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) {
|
|
elems.ht_cap_elem = bss_elems.ht_cap_elem;
|
|
sdata_info(sdata,
|
|
"AP bug: HT capability missing from AssocResp\n");
|
|
}
|
|
if (!elems.ht_operation && bss_elems.ht_operation &&
|
|
!(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) {
|
|
elems.ht_operation = bss_elems.ht_operation;
|
|
sdata_info(sdata,
|
|
"AP bug: HT operation missing from AssocResp\n");
|
|
}
|
|
if (!elems.vht_cap_elem && bss_elems.vht_cap_elem &&
|
|
!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) {
|
|
elems.vht_cap_elem = bss_elems.vht_cap_elem;
|
|
sdata_info(sdata,
|
|
"AP bug: VHT capa missing from AssocResp\n");
|
|
}
|
|
if (!elems.vht_operation && bss_elems.vht_operation &&
|
|
!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) {
|
|
elems.vht_operation = bss_elems.vht_operation;
|
|
sdata_info(sdata,
|
|
"AP bug: VHT operation missing from AssocResp\n");
|
|
}
|
|
}
|
|
|
|
/*
|
|
* We previously checked these in the beacon/probe response, so
|
|
* they should be present here. This is just a safety net.
|
|
*/
|
|
if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
|
|
(!elems.wmm_param || !elems.ht_cap_elem || !elems.ht_operation)) {
|
|
sdata_info(sdata,
|
|
"HT AP is missing WMM params or HT capability/operation\n");
|
|
ret = false;
|
|
goto out;
|
|
}
|
|
|
|
if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
|
|
(!elems.vht_cap_elem || !elems.vht_operation)) {
|
|
sdata_info(sdata,
|
|
"VHT AP is missing VHT capability/operation\n");
|
|
ret = false;
|
|
goto out;
|
|
}
|
|
|
|
mutex_lock(&sdata->local->sta_mtx);
|
|
/*
|
|
* station info was already allocated and inserted before
|
|
* the association and should be available to us
|
|
*/
|
|
sta = sta_info_get(sdata, cbss->bssid);
|
|
if (WARN_ON(!sta)) {
|
|
mutex_unlock(&sdata->local->sta_mtx);
|
|
ret = false;
|
|
goto out;
|
|
}
|
|
|
|
sband = local->hw.wiphy->bands[ieee80211_get_sdata_band(sdata)];
|
|
|
|
/* Set up internal HT/VHT capabilities */
|
|
if (elems.ht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_HT))
|
|
ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband,
|
|
elems.ht_cap_elem, sta);
|
|
|
|
if (elems.vht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
|
|
ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband,
|
|
elems.vht_cap_elem, sta);
|
|
|
|
/*
|
|
* Some APs, e.g. Netgear WNDR3700, report invalid HT operation data
|
|
* in their association response, so ignore that data for our own
|
|
* configuration. If it changed since the last beacon, we'll get the
|
|
* next beacon and update then.
|
|
*/
|
|
|
|
/*
|
|
* If an operating mode notification IE is present, override the
|
|
* NSS calculation (that would be done in rate_control_rate_init())
|
|
* and use the # of streams from that element.
|
|
*/
|
|
if (elems.opmode_notif &&
|
|
!(*elems.opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF)) {
|
|
u8 nss;
|
|
|
|
nss = *elems.opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_MASK;
|
|
nss >>= IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT;
|
|
nss += 1;
|
|
sta->sta.rx_nss = nss;
|
|
}
|
|
|
|
rate_control_rate_init(sta);
|
|
|
|
if (ifmgd->flags & IEEE80211_STA_MFP_ENABLED)
|
|
set_sta_flag(sta, WLAN_STA_MFP);
|
|
|
|
if (elems.wmm_param)
|
|
set_sta_flag(sta, WLAN_STA_WME);
|
|
|
|
err = sta_info_move_state(sta, IEEE80211_STA_ASSOC);
|
|
if (!err && !(ifmgd->flags & IEEE80211_STA_CONTROL_PORT))
|
|
err = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED);
|
|
if (err) {
|
|
sdata_info(sdata,
|
|
"failed to move station %pM to desired state\n",
|
|
sta->sta.addr);
|
|
WARN_ON(__sta_info_destroy(sta));
|
|
mutex_unlock(&sdata->local->sta_mtx);
|
|
ret = false;
|
|
goto out;
|
|
}
|
|
|
|
mutex_unlock(&sdata->local->sta_mtx);
|
|
|
|
/*
|
|
* Always handle WMM once after association regardless
|
|
* of the first value the AP uses. Setting -1 here has
|
|
* that effect because the AP values is an unsigned
|
|
* 4-bit value.
|
|
*/
|
|
ifmgd->wmm_last_param_set = -1;
|
|
|
|
if (!(ifmgd->flags & IEEE80211_STA_DISABLE_WMM) && elems.wmm_param)
|
|
ieee80211_sta_wmm_params(local, sdata, elems.wmm_param,
|
|
elems.wmm_param_len);
|
|
else
|
|
ieee80211_set_wmm_default(sdata, false);
|
|
changed |= BSS_CHANGED_QOS;
|
|
|
|
/* set AID and assoc capability,
|
|
* ieee80211_set_associated() will tell the driver */
|
|
bss_conf->aid = aid;
|
|
bss_conf->assoc_capability = capab_info;
|
|
ieee80211_set_associated(sdata, cbss, changed);
|
|
|
|
/*
|
|
* If we're using 4-addr mode, let the AP know that we're
|
|
* doing so, so that it can create the STA VLAN on its side
|
|
*/
|
|
if (ifmgd->use_4addr)
|
|
ieee80211_send_4addr_nullfunc(local, sdata);
|
|
|
|
/*
|
|
* Start timer to probe the connection to the AP now.
|
|
* Also start the timer that will detect beacon loss.
|
|
*/
|
|
ieee80211_sta_rx_notify(sdata, (struct ieee80211_hdr *)mgmt);
|
|
ieee80211_sta_reset_beacon_monitor(sdata);
|
|
|
|
ret = true;
|
|
out:
|
|
kfree(bss_ies);
|
|
return ret;
|
|
}
|
|
|
|
static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
|
|
struct ieee80211_mgmt *mgmt,
|
|
size_t len)
|
|
{
|
|
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
|
|
struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
|
|
u16 capab_info, status_code, aid;
|
|
struct ieee802_11_elems elems;
|
|
u8 *pos;
|
|
bool reassoc;
|
|
struct cfg80211_bss *bss;
|
|
|
|
sdata_assert_lock(sdata);
|
|
|
|
if (!assoc_data)
|
|
return;
|
|
if (!ether_addr_equal(assoc_data->bss->bssid, mgmt->bssid))
|
|
return;
|
|
|
|
/*
|
|
* AssocResp and ReassocResp have identical structure, so process both
|
|
* of them in this function.
|
|
*/
|
|
|
|
if (len < 24 + 6)
|
|
return;
|
|
|
|
reassoc = ieee80211_is_reassoc_req(mgmt->frame_control);
|
|
capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
|
|
status_code = le16_to_cpu(mgmt->u.assoc_resp.status_code);
|
|
aid = le16_to_cpu(mgmt->u.assoc_resp.aid);
|
|
|
|
sdata_info(sdata,
|
|
"RX %sssocResp from %pM (capab=0x%x status=%d aid=%d)\n",
|
|
reassoc ? "Rea" : "A", mgmt->sa,
|
|
capab_info, status_code, (u16)(aid & ~(BIT(15) | BIT(14))));
|
|
|
|
pos = mgmt->u.assoc_resp.variable;
|
|
ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), false, &elems);
|
|
|
|
if (status_code == WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY &&
|
|
elems.timeout_int &&
|
|
elems.timeout_int->type == WLAN_TIMEOUT_ASSOC_COMEBACK) {
|
|
u32 tu, ms;
|
|
tu = le32_to_cpu(elems.timeout_int->value);
|
|
ms = tu * 1024 / 1000;
|
|
sdata_info(sdata,
|
|
"%pM rejected association temporarily; comeback duration %u TU (%u ms)\n",
|
|
mgmt->sa, tu, ms);
|
|
assoc_data->timeout = jiffies + msecs_to_jiffies(ms);
|
|
assoc_data->timeout_started = true;
|
|
if (ms > IEEE80211_ASSOC_TIMEOUT)
|
|
run_again(sdata, assoc_data->timeout);
|
|
return;
|
|
}
|
|
|
|
bss = assoc_data->bss;
|
|
|
|
if (status_code != WLAN_STATUS_SUCCESS) {
|
|
sdata_info(sdata, "%pM denied association (code=%d)\n",
|
|
mgmt->sa, status_code);
|
|
ieee80211_destroy_assoc_data(sdata, false);
|
|
} else {
|
|
if (!ieee80211_assoc_success(sdata, bss, mgmt, len)) {
|
|
/* oops -- internal error -- send timeout for now */
|
|
ieee80211_destroy_assoc_data(sdata, false);
|
|
cfg80211_assoc_timeout(sdata->dev, bss);
|
|
return;
|
|
}
|
|
sdata_info(sdata, "associated\n");
|
|
|
|
/*
|
|
* destroy assoc_data afterwards, as otherwise an idle
|
|
* recalc after assoc_data is NULL but before associated
|
|
* is set can cause the interface to go idle
|
|
*/
|
|
ieee80211_destroy_assoc_data(sdata, true);
|
|
}
|
|
|
|
cfg80211_rx_assoc_resp(sdata->dev, bss, (u8 *)mgmt, len);
|
|
}
|
|
|
|
static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
|
|
struct ieee80211_mgmt *mgmt, size_t len,
|
|
struct ieee80211_rx_status *rx_status,
|
|
struct ieee802_11_elems *elems)
|
|
{
|
|
struct ieee80211_local *local = sdata->local;
|
|
int freq;
|
|
struct ieee80211_bss *bss;
|
|
struct ieee80211_channel *channel;
|
|
|
|
sdata_assert_lock(sdata);
|
|
|
|
if (elems->ds_params)
|
|
freq = ieee80211_channel_to_frequency(elems->ds_params[0],
|
|
rx_status->band);
|
|
else
|
|
freq = rx_status->freq;
|
|
|
|
channel = ieee80211_get_channel(local->hw.wiphy, freq);
|
|
|
|
if (!channel || channel->flags & IEEE80211_CHAN_DISABLED)
|
|
return;
|
|
|
|
bss = ieee80211_bss_info_update(local, rx_status, mgmt, len, elems,
|
|
channel);
|
|
if (bss) {
|
|
ieee80211_rx_bss_put(local, bss);
|
|
sdata->vif.bss_conf.beacon_rate = bss->beacon_rate;
|
|
}
|
|
}
|
|
|
|
|
|
static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata,
|
|
struct sk_buff *skb)
|
|
{
|
|
struct ieee80211_mgmt *mgmt = (void *)skb->data;
|
|
struct ieee80211_if_managed *ifmgd;
|
|
struct ieee80211_rx_status *rx_status = (void *) skb->cb;
|
|
size_t baselen, len = skb->len;
|
|
struct ieee802_11_elems elems;
|
|
|
|
ifmgd = &sdata->u.mgd;
|
|
|
|
sdata_assert_lock(sdata);
|
|
|
|
if (!ether_addr_equal(mgmt->da, sdata->vif.addr))
|
|
return; /* ignore ProbeResp to foreign address */
|
|
|
|
baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt;
|
|
if (baselen > len)
|
|
return;
|
|
|
|
ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen,
|
|
false, &elems);
|
|
|
|
ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems);
|
|
|
|
if (ifmgd->associated &&
|
|
ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid))
|
|
ieee80211_reset_ap_probe(sdata);
|
|
|
|
if (ifmgd->auth_data && !ifmgd->auth_data->bss->proberesp_ies &&
|
|
ether_addr_equal(mgmt->bssid, ifmgd->auth_data->bss->bssid)) {
|
|
/* got probe response, continue with auth */
|
|
sdata_info(sdata, "direct probe responded\n");
|
|
ifmgd->auth_data->tries = 0;
|
|
ifmgd->auth_data->timeout = jiffies;
|
|
ifmgd->auth_data->timeout_started = true;
|
|
run_again(sdata, ifmgd->auth_data->timeout);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* This is the canonical list of information elements we care about,
|
|
* the filter code also gives us all changes to the Microsoft OUI
|
|
* (00:50:F2) vendor IE which is used for WMM which we need to track.
|
|
*
|
|
* We implement beacon filtering in software since that means we can
|
|
* avoid processing the frame here and in cfg80211, and userspace
|
|
* will not be able to tell whether the hardware supports it or not.
|
|
*
|
|
* XXX: This list needs to be dynamic -- userspace needs to be able to
|
|
* add items it requires. It also needs to be able to tell us to
|
|
* look out for other vendor IEs.
|
|
*/
|
|
static const u64 care_about_ies =
|
|
(1ULL << WLAN_EID_COUNTRY) |
|
|
(1ULL << WLAN_EID_ERP_INFO) |
|
|
(1ULL << WLAN_EID_CHANNEL_SWITCH) |
|
|
(1ULL << WLAN_EID_PWR_CONSTRAINT) |
|
|
(1ULL << WLAN_EID_HT_CAPABILITY) |
|
|
(1ULL << WLAN_EID_HT_OPERATION);
|
|
|
|
static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
|
|
struct ieee80211_mgmt *mgmt, size_t len,
|
|
struct ieee80211_rx_status *rx_status)
|
|
{
|
|
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
|
|
struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
|
|
size_t baselen;
|
|
struct ieee802_11_elems elems;
|
|
struct ieee80211_local *local = sdata->local;
|
|
struct ieee80211_chanctx_conf *chanctx_conf;
|
|
struct ieee80211_channel *chan;
|
|
struct sta_info *sta;
|
|
u32 changed = 0;
|
|
bool erp_valid;
|
|
u8 erp_value = 0;
|
|
u32 ncrc;
|
|
u8 *bssid;
|
|
u8 deauth_buf[IEEE80211_DEAUTH_FRAME_LEN];
|
|
|
|
sdata_assert_lock(sdata);
|
|
|
|
/* Process beacon from the current BSS */
|
|
baselen = (u8 *) mgmt->u.beacon.variable - (u8 *) mgmt;
|
|
if (baselen > len)
|
|
return;
|
|
|
|
rcu_read_lock();
|
|
chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
|
|
if (!chanctx_conf) {
|
|
rcu_read_unlock();
|
|
return;
|
|
}
|
|
|
|
if (rx_status->freq != chanctx_conf->def.chan->center_freq) {
|
|
rcu_read_unlock();
|
|
return;
|
|
}
|
|
chan = chanctx_conf->def.chan;
|
|
rcu_read_unlock();
|
|
|
|
if (ifmgd->assoc_data && ifmgd->assoc_data->need_beacon &&
|
|
ether_addr_equal(mgmt->bssid, ifmgd->assoc_data->bss->bssid)) {
|
|
ieee802_11_parse_elems(mgmt->u.beacon.variable,
|
|
len - baselen, false, &elems);
|
|
|
|
ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems);
|
|
if (elems.tim && !elems.parse_error) {
|
|
const struct ieee80211_tim_ie *tim_ie = elems.tim;
|
|
ifmgd->dtim_period = tim_ie->dtim_period;
|
|
}
|
|
ifmgd->have_beacon = true;
|
|
ifmgd->assoc_data->need_beacon = false;
|
|
if (local->hw.flags & IEEE80211_HW_TIMING_BEACON_ONLY) {
|
|
sdata->vif.bss_conf.sync_tsf =
|
|
le64_to_cpu(mgmt->u.beacon.timestamp);
|
|
sdata->vif.bss_conf.sync_device_ts =
|
|
rx_status->device_timestamp;
|
|
if (elems.tim)
|
|
sdata->vif.bss_conf.sync_dtim_count =
|
|
elems.tim->dtim_count;
|
|
else
|
|
sdata->vif.bss_conf.sync_dtim_count = 0;
|
|
}
|
|
/* continue assoc process */
|
|
ifmgd->assoc_data->timeout = jiffies;
|
|
ifmgd->assoc_data->timeout_started = true;
|
|
run_again(sdata, ifmgd->assoc_data->timeout);
|
|
return;
|
|
}
|
|
|
|
if (!ifmgd->associated ||
|
|
!ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid))
|
|
return;
|
|
bssid = ifmgd->associated->bssid;
|
|
|
|
/* Track average RSSI from the Beacon frames of the current AP */
|
|
ifmgd->last_beacon_signal = rx_status->signal;
|
|
if (ifmgd->flags & IEEE80211_STA_RESET_SIGNAL_AVE) {
|
|
ifmgd->flags &= ~IEEE80211_STA_RESET_SIGNAL_AVE;
|
|
ifmgd->ave_beacon_signal = rx_status->signal * 16;
|
|
ifmgd->last_cqm_event_signal = 0;
|
|
ifmgd->count_beacon_signal = 1;
|
|
ifmgd->last_ave_beacon_signal = 0;
|
|
} else {
|
|
ifmgd->ave_beacon_signal =
|
|
(IEEE80211_SIGNAL_AVE_WEIGHT * rx_status->signal * 16 +
|
|
(16 - IEEE80211_SIGNAL_AVE_WEIGHT) *
|
|
ifmgd->ave_beacon_signal) / 16;
|
|
ifmgd->count_beacon_signal++;
|
|
}
|
|
|
|
if (ifmgd->rssi_min_thold != ifmgd->rssi_max_thold &&
|
|
ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT) {
|
|
int sig = ifmgd->ave_beacon_signal;
|
|
int last_sig = ifmgd->last_ave_beacon_signal;
|
|
|
|
/*
|
|
* if signal crosses either of the boundaries, invoke callback
|
|
* with appropriate parameters
|
|
*/
|
|
if (sig > ifmgd->rssi_max_thold &&
|
|
(last_sig <= ifmgd->rssi_min_thold || last_sig == 0)) {
|
|
ifmgd->last_ave_beacon_signal = sig;
|
|
drv_rssi_callback(local, sdata, RSSI_EVENT_HIGH);
|
|
} else if (sig < ifmgd->rssi_min_thold &&
|
|
(last_sig >= ifmgd->rssi_max_thold ||
|
|
last_sig == 0)) {
|
|
ifmgd->last_ave_beacon_signal = sig;
|
|
drv_rssi_callback(local, sdata, RSSI_EVENT_LOW);
|
|
}
|
|
}
|
|
|
|
if (bss_conf->cqm_rssi_thold &&
|
|
ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT &&
|
|
!(sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI)) {
|
|
int sig = ifmgd->ave_beacon_signal / 16;
|
|
int last_event = ifmgd->last_cqm_event_signal;
|
|
int thold = bss_conf->cqm_rssi_thold;
|
|
int hyst = bss_conf->cqm_rssi_hyst;
|
|
if (sig < thold &&
|
|
(last_event == 0 || sig < last_event - hyst)) {
|
|
ifmgd->last_cqm_event_signal = sig;
|
|
ieee80211_cqm_rssi_notify(
|
|
&sdata->vif,
|
|
NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
|
|
GFP_KERNEL);
|
|
} else if (sig > thold &&
|
|
(last_event == 0 || sig > last_event + hyst)) {
|
|
ifmgd->last_cqm_event_signal = sig;
|
|
ieee80211_cqm_rssi_notify(
|
|
&sdata->vif,
|
|
NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
|
|
GFP_KERNEL);
|
|
}
|
|
}
|
|
|
|
if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) {
|
|
mlme_dbg_ratelimited(sdata,
|
|
"cancelling AP probe due to a received beacon\n");
|
|
ieee80211_reset_ap_probe(sdata);
|
|
}
|
|
|
|
/*
|
|
* Push the beacon loss detection into the future since
|
|
* we are processing a beacon from the AP just now.
|
|
*/
|
|
ieee80211_sta_reset_beacon_monitor(sdata);
|
|
|
|
ncrc = crc32_be(0, (void *)&mgmt->u.beacon.beacon_int, 4);
|
|
ncrc = ieee802_11_parse_elems_crc(mgmt->u.beacon.variable,
|
|
len - baselen, false, &elems,
|
|
care_about_ies, ncrc);
|
|
|
|
if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) {
|
|
bool directed_tim = ieee80211_check_tim(elems.tim,
|
|
elems.tim_len,
|
|
ifmgd->aid);
|
|
if (directed_tim) {
|
|
if (local->hw.conf.dynamic_ps_timeout > 0) {
|
|
if (local->hw.conf.flags & IEEE80211_CONF_PS) {
|
|
local->hw.conf.flags &= ~IEEE80211_CONF_PS;
|
|
ieee80211_hw_config(local,
|
|
IEEE80211_CONF_CHANGE_PS);
|
|
}
|
|
ieee80211_send_nullfunc(local, sdata, 0);
|
|
} else if (!local->pspolling && sdata->u.mgd.powersave) {
|
|
local->pspolling = true;
|
|
|
|
/*
|
|
* Here is assumed that the driver will be
|
|
* able to send ps-poll frame and receive a
|
|
* response even though power save mode is
|
|
* enabled, but some drivers might require
|
|
* to disable power save here. This needs
|
|
* to be investigated.
|
|
*/
|
|
ieee80211_send_pspoll(local, sdata);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (sdata->vif.p2p) {
|
|
struct ieee80211_p2p_noa_attr noa = {};
|
|
int ret;
|
|
|
|
ret = cfg80211_get_p2p_attr(mgmt->u.beacon.variable,
|
|
len - baselen,
|
|
IEEE80211_P2P_ATTR_ABSENCE_NOTICE,
|
|
(u8 *) &noa, sizeof(noa));
|
|
if (ret >= 2) {
|
|
if (sdata->u.mgd.p2p_noa_index != noa.index) {
|
|
/* valid noa_attr and index changed */
|
|
sdata->u.mgd.p2p_noa_index = noa.index;
|
|
memcpy(&bss_conf->p2p_noa_attr, &noa, sizeof(noa));
|
|
changed |= BSS_CHANGED_P2P_PS;
|
|
/*
|
|
* make sure we update all information, the CRC
|
|
* mechanism doesn't look at P2P attributes.
|
|
*/
|
|
ifmgd->beacon_crc_valid = false;
|
|
}
|
|
} else if (sdata->u.mgd.p2p_noa_index != -1) {
|
|
/* noa_attr not found and we had valid noa_attr before */
|
|
sdata->u.mgd.p2p_noa_index = -1;
|
|
memset(&bss_conf->p2p_noa_attr, 0, sizeof(bss_conf->p2p_noa_attr));
|
|
changed |= BSS_CHANGED_P2P_PS;
|
|
ifmgd->beacon_crc_valid = false;
|
|
}
|
|
}
|
|
|
|
if (ncrc == ifmgd->beacon_crc && ifmgd->beacon_crc_valid)
|
|
return;
|
|
ifmgd->beacon_crc = ncrc;
|
|
ifmgd->beacon_crc_valid = true;
|
|
|
|
ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems);
|
|
|
|
ieee80211_sta_process_chanswitch(sdata, rx_status->mactime,
|
|
&elems, true);
|
|
|
|
if (!(ifmgd->flags & IEEE80211_STA_DISABLE_WMM) &&
|
|
ieee80211_sta_wmm_params(local, sdata, elems.wmm_param,
|
|
elems.wmm_param_len))
|
|
changed |= BSS_CHANGED_QOS;
|
|
|
|
/*
|
|
* If we haven't had a beacon before, tell the driver about the
|
|
* DTIM period (and beacon timing if desired) now.
|
|
*/
|
|
if (!ifmgd->have_beacon) {
|
|
/* a few bogus AP send dtim_period = 0 or no TIM IE */
|
|
if (elems.tim)
|
|
bss_conf->dtim_period = elems.tim->dtim_period ?: 1;
|
|
else
|
|
bss_conf->dtim_period = 1;
|
|
|
|
if (local->hw.flags & IEEE80211_HW_TIMING_BEACON_ONLY) {
|
|
sdata->vif.bss_conf.sync_tsf =
|
|
le64_to_cpu(mgmt->u.beacon.timestamp);
|
|
sdata->vif.bss_conf.sync_device_ts =
|
|
rx_status->device_timestamp;
|
|
if (elems.tim)
|
|
sdata->vif.bss_conf.sync_dtim_count =
|
|
elems.tim->dtim_count;
|
|
else
|
|
sdata->vif.bss_conf.sync_dtim_count = 0;
|
|
}
|
|
|
|
changed |= BSS_CHANGED_BEACON_INFO;
|
|
ifmgd->have_beacon = true;
|
|
|
|
mutex_lock(&local->iflist_mtx);
|
|
ieee80211_recalc_ps(local, -1);
|
|
mutex_unlock(&local->iflist_mtx);
|
|
|
|
ieee80211_recalc_ps_vif(sdata);
|
|
}
|
|
|
|
if (elems.erp_info) {
|
|
erp_valid = true;
|
|
erp_value = elems.erp_info[0];
|
|
} else {
|
|
erp_valid = false;
|
|
}
|
|
changed |= ieee80211_handle_bss_capability(sdata,
|
|
le16_to_cpu(mgmt->u.beacon.capab_info),
|
|
erp_valid, erp_value);
|
|
|
|
mutex_lock(&local->sta_mtx);
|
|
sta = sta_info_get(sdata, bssid);
|
|
|
|
if (ieee80211_config_bw(sdata, sta, elems.ht_operation,
|
|
elems.vht_operation, bssid, &changed)) {
|
|
mutex_unlock(&local->sta_mtx);
|
|
ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
|
|
WLAN_REASON_DEAUTH_LEAVING,
|
|
true, deauth_buf);
|
|
cfg80211_tx_mlme_mgmt(sdata->dev, deauth_buf,
|
|
sizeof(deauth_buf));
|
|
return;
|
|
}
|
|
|
|
if (sta && elems.opmode_notif)
|
|
ieee80211_vht_handle_opmode(sdata, sta, *elems.opmode_notif,
|
|
rx_status->band, true);
|
|
mutex_unlock(&local->sta_mtx);
|
|
|
|
if (elems.country_elem && elems.pwr_constr_elem &&
|
|
mgmt->u.probe_resp.capab_info &
|
|
cpu_to_le16(WLAN_CAPABILITY_SPECTRUM_MGMT))
|
|
changed |= ieee80211_handle_pwr_constr(sdata, chan,
|
|
elems.country_elem,
|
|
elems.country_elem_len,
|
|
elems.pwr_constr_elem);
|
|
|
|
ieee80211_bss_info_change_notify(sdata, changed);
|
|
}
|
|
|
|
void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
|
|
struct sk_buff *skb)
|
|
{
|
|
struct ieee80211_rx_status *rx_status;
|
|
struct ieee80211_mgmt *mgmt;
|
|
u16 fc;
|
|
struct ieee802_11_elems elems;
|
|
int ies_len;
|
|
|
|
rx_status = (struct ieee80211_rx_status *) skb->cb;
|
|
mgmt = (struct ieee80211_mgmt *) skb->data;
|
|
fc = le16_to_cpu(mgmt->frame_control);
|
|
|
|
sdata_lock(sdata);
|
|
|
|
switch (fc & IEEE80211_FCTL_STYPE) {
|
|
case IEEE80211_STYPE_BEACON:
|
|
ieee80211_rx_mgmt_beacon(sdata, mgmt, skb->len, rx_status);
|
|
break;
|
|
case IEEE80211_STYPE_PROBE_RESP:
|
|
ieee80211_rx_mgmt_probe_resp(sdata, skb);
|
|
break;
|
|
case IEEE80211_STYPE_AUTH:
|
|
ieee80211_rx_mgmt_auth(sdata, mgmt, skb->len);
|
|
break;
|
|
case IEEE80211_STYPE_DEAUTH:
|
|
ieee80211_rx_mgmt_deauth(sdata, mgmt, skb->len);
|
|
break;
|
|
case IEEE80211_STYPE_DISASSOC:
|
|
ieee80211_rx_mgmt_disassoc(sdata, mgmt, skb->len);
|
|
break;
|
|
case IEEE80211_STYPE_ASSOC_RESP:
|
|
case IEEE80211_STYPE_REASSOC_RESP:
|
|
ieee80211_rx_mgmt_assoc_resp(sdata, mgmt, skb->len);
|
|
break;
|
|
case IEEE80211_STYPE_ACTION:
|
|
if (mgmt->u.action.category == WLAN_CATEGORY_SPECTRUM_MGMT) {
|
|
ies_len = skb->len -
|
|
offsetof(struct ieee80211_mgmt,
|
|
u.action.u.chan_switch.variable);
|
|
|
|
if (ies_len < 0)
|
|
break;
|
|
|
|
ieee802_11_parse_elems(
|
|
mgmt->u.action.u.chan_switch.variable,
|
|
ies_len, true, &elems);
|
|
|
|
if (elems.parse_error)
|
|
break;
|
|
|
|
ieee80211_sta_process_chanswitch(sdata,
|
|
rx_status->mactime,
|
|
&elems, false);
|
|
} else if (mgmt->u.action.category == WLAN_CATEGORY_PUBLIC) {
|
|
ies_len = skb->len -
|
|
offsetof(struct ieee80211_mgmt,
|
|
u.action.u.ext_chan_switch.variable);
|
|
|
|
if (ies_len < 0)
|
|
break;
|
|
|
|
ieee802_11_parse_elems(
|
|
mgmt->u.action.u.ext_chan_switch.variable,
|
|
ies_len, true, &elems);
|
|
|
|
if (elems.parse_error)
|
|
break;
|
|
|
|
/* for the handling code pretend this was also an IE */
|
|
elems.ext_chansw_ie =
|
|
&mgmt->u.action.u.ext_chan_switch.data;
|
|
|
|
ieee80211_sta_process_chanswitch(sdata,
|
|
rx_status->mactime,
|
|
&elems, false);
|
|
}
|
|
break;
|
|
}
|
|
sdata_unlock(sdata);
|
|
}
|
|
|
|
static void ieee80211_sta_timer(unsigned long data)
|
|
{
|
|
struct ieee80211_sub_if_data *sdata =
|
|
(struct ieee80211_sub_if_data *) data;
|
|
|
|
ieee80211_queue_work(&sdata->local->hw, &sdata->work);
|
|
}
|
|
|
|
static void ieee80211_sta_connection_lost(struct ieee80211_sub_if_data *sdata,
|
|
u8 *bssid, u8 reason, bool tx)
|
|
{
|
|
u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
|
|
|
|
ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, reason,
|
|
tx, frame_buf);
|
|
|
|
cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf,
|
|
IEEE80211_DEAUTH_FRAME_LEN);
|
|
}
|
|
|
|
static int ieee80211_probe_auth(struct ieee80211_sub_if_data *sdata)
|
|
{
|
|
struct ieee80211_local *local = sdata->local;
|
|
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
|
|
struct ieee80211_mgd_auth_data *auth_data = ifmgd->auth_data;
|
|
u32 tx_flags = 0;
|
|
|
|
sdata_assert_lock(sdata);
|
|
|
|
if (WARN_ON_ONCE(!auth_data))
|
|
return -EINVAL;
|
|
|
|
auth_data->tries++;
|
|
|
|
if (auth_data->tries > IEEE80211_AUTH_MAX_TRIES) {
|
|
sdata_info(sdata, "authentication with %pM timed out\n",
|
|
auth_data->bss->bssid);
|
|
|
|
/*
|
|
* Most likely AP is not in the range so remove the
|
|
* bss struct for that AP.
|
|
*/
|
|
cfg80211_unlink_bss(local->hw.wiphy, auth_data->bss);
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
drv_mgd_prepare_tx(local, sdata);
|
|
|
|
if (auth_data->bss->proberesp_ies) {
|
|
u16 trans = 1;
|
|
u16 status = 0;
|
|
|
|
sdata_info(sdata, "send auth to %pM (try %d/%d)\n",
|
|
auth_data->bss->bssid, auth_data->tries,
|
|
IEEE80211_AUTH_MAX_TRIES);
|
|
|
|
auth_data->expected_transaction = 2;
|
|
|
|
if (auth_data->algorithm == WLAN_AUTH_SAE) {
|
|
trans = auth_data->sae_trans;
|
|
status = auth_data->sae_status;
|
|
auth_data->expected_transaction = trans;
|
|
}
|
|
|
|
if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)
|
|
tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS |
|
|
IEEE80211_TX_INTFL_MLME_CONN_TX;
|
|
|
|
ieee80211_send_auth(sdata, trans, auth_data->algorithm, status,
|
|
auth_data->data, auth_data->data_len,
|
|
auth_data->bss->bssid,
|
|
auth_data->bss->bssid, NULL, 0, 0,
|
|
tx_flags);
|
|
} else {
|
|
const u8 *ssidie;
|
|
|
|
sdata_info(sdata, "direct probe to %pM (try %d/%i)\n",
|
|
auth_data->bss->bssid, auth_data->tries,
|
|
IEEE80211_AUTH_MAX_TRIES);
|
|
|
|
rcu_read_lock();
|
|
ssidie = ieee80211_bss_get_ie(auth_data->bss, WLAN_EID_SSID);
|
|
if (!ssidie) {
|
|
rcu_read_unlock();
|
|
return -EINVAL;
|
|
}
|
|
/*
|
|
* Direct probe is sent to broadcast address as some APs
|
|
* will not answer to direct packet in unassociated state.
|
|
*/
|
|
ieee80211_send_probe_req(sdata, NULL, ssidie + 2, ssidie[1],
|
|
NULL, 0, (u32) -1, true, 0,
|
|
auth_data->bss->channel, false);
|
|
rcu_read_unlock();
|
|
}
|
|
|
|
if (tx_flags == 0) {
|
|
auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT;
|
|
auth_data->timeout_started = true;
|
|
run_again(sdata, auth_data->timeout);
|
|
} else {
|
|
auth_data->timeout =
|
|
round_jiffies_up(jiffies + IEEE80211_AUTH_TIMEOUT_LONG);
|
|
auth_data->timeout_started = true;
|
|
run_again(sdata, auth_data->timeout);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ieee80211_do_assoc(struct ieee80211_sub_if_data *sdata)
|
|
{
|
|
struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data;
|
|
struct ieee80211_local *local = sdata->local;
|
|
|
|
sdata_assert_lock(sdata);
|
|
|
|
assoc_data->tries++;
|
|
if (assoc_data->tries > IEEE80211_ASSOC_MAX_TRIES) {
|
|
sdata_info(sdata, "association with %pM timed out\n",
|
|
assoc_data->bss->bssid);
|
|
|
|
/*
|
|
* Most likely AP is not in the range so remove the
|
|
* bss struct for that AP.
|
|
*/
|
|
cfg80211_unlink_bss(local->hw.wiphy, assoc_data->bss);
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
sdata_info(sdata, "associate with %pM (try %d/%d)\n",
|
|
assoc_data->bss->bssid, assoc_data->tries,
|
|
IEEE80211_ASSOC_MAX_TRIES);
|
|
ieee80211_send_assoc(sdata);
|
|
|
|
if (!(local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)) {
|
|
assoc_data->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT;
|
|
assoc_data->timeout_started = true;
|
|
run_again(sdata, assoc_data->timeout);
|
|
} else {
|
|
assoc_data->timeout =
|
|
round_jiffies_up(jiffies +
|
|
IEEE80211_ASSOC_TIMEOUT_LONG);
|
|
assoc_data->timeout_started = true;
|
|
run_again(sdata, assoc_data->timeout);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void ieee80211_mgd_conn_tx_status(struct ieee80211_sub_if_data *sdata,
|
|
__le16 fc, bool acked)
|
|
{
|
|
struct ieee80211_local *local = sdata->local;
|
|
|
|
sdata->u.mgd.status_fc = fc;
|
|
sdata->u.mgd.status_acked = acked;
|
|
sdata->u.mgd.status_received = true;
|
|
|
|
ieee80211_queue_work(&local->hw, &sdata->work);
|
|
}
|
|
|
|
void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata)
|
|
{
|
|
struct ieee80211_local *local = sdata->local;
|
|
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
|
|
|
|
sdata_lock(sdata);
|
|
|
|
if (ifmgd->status_received) {
|
|
__le16 fc = ifmgd->status_fc;
|
|
bool status_acked = ifmgd->status_acked;
|
|
|
|
ifmgd->status_received = false;
|
|
if (ifmgd->auth_data &&
|
|
(ieee80211_is_probe_req(fc) || ieee80211_is_auth(fc))) {
|
|
if (status_acked) {
|
|
ifmgd->auth_data->timeout =
|
|
jiffies + IEEE80211_AUTH_TIMEOUT_SHORT;
|
|
run_again(sdata, ifmgd->auth_data->timeout);
|
|
} else {
|
|
ifmgd->auth_data->timeout = jiffies - 1;
|
|
}
|
|
ifmgd->auth_data->timeout_started = true;
|
|
} else if (ifmgd->assoc_data &&
|
|
(ieee80211_is_assoc_req(fc) ||
|
|
ieee80211_is_reassoc_req(fc))) {
|
|
if (status_acked) {
|
|
ifmgd->assoc_data->timeout =
|
|
jiffies + IEEE80211_ASSOC_TIMEOUT_SHORT;
|
|
run_again(sdata, ifmgd->assoc_data->timeout);
|
|
} else {
|
|
ifmgd->assoc_data->timeout = jiffies - 1;
|
|
}
|
|
ifmgd->assoc_data->timeout_started = true;
|
|
}
|
|
}
|
|
|
|
if (ifmgd->auth_data && ifmgd->auth_data->timeout_started &&
|
|
time_after(jiffies, ifmgd->auth_data->timeout)) {
|
|
if (ifmgd->auth_data->done) {
|
|
/*
|
|
* ok ... we waited for assoc but userspace didn't,
|
|
* so let's just kill the auth data
|
|
*/
|
|
ieee80211_destroy_auth_data(sdata, false);
|
|
} else if (ieee80211_probe_auth(sdata)) {
|
|
u8 bssid[ETH_ALEN];
|
|
|
|
memcpy(bssid, ifmgd->auth_data->bss->bssid, ETH_ALEN);
|
|
|
|
ieee80211_destroy_auth_data(sdata, false);
|
|
|
|
cfg80211_auth_timeout(sdata->dev, bssid);
|
|
}
|
|
} else if (ifmgd->auth_data && ifmgd->auth_data->timeout_started)
|
|
run_again(sdata, ifmgd->auth_data->timeout);
|
|
|
|
if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started &&
|
|
time_after(jiffies, ifmgd->assoc_data->timeout)) {
|
|
if ((ifmgd->assoc_data->need_beacon && !ifmgd->have_beacon) ||
|
|
ieee80211_do_assoc(sdata)) {
|
|
struct cfg80211_bss *bss = ifmgd->assoc_data->bss;
|
|
|
|
ieee80211_destroy_assoc_data(sdata, false);
|
|
cfg80211_assoc_timeout(sdata->dev, bss);
|
|
}
|
|
} else if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started)
|
|
run_again(sdata, ifmgd->assoc_data->timeout);
|
|
|
|
if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL &&
|
|
ifmgd->associated) {
|
|
u8 bssid[ETH_ALEN];
|
|
int max_tries;
|
|
|
|
memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
|
|
|
|
if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)
|
|
max_tries = max_nullfunc_tries;
|
|
else
|
|
max_tries = max_probe_tries;
|
|
|
|
/* ACK received for nullfunc probing frame */
|
|
if (!ifmgd->probe_send_count)
|
|
ieee80211_reset_ap_probe(sdata);
|
|
else if (ifmgd->nullfunc_failed) {
|
|
if (ifmgd->probe_send_count < max_tries) {
|
|
mlme_dbg(sdata,
|
|
"No ack for nullfunc frame to AP %pM, try %d/%i\n",
|
|
bssid, ifmgd->probe_send_count,
|
|
max_tries);
|
|
ieee80211_mgd_probe_ap_send(sdata);
|
|
} else {
|
|
mlme_dbg(sdata,
|
|
"No ack for nullfunc frame to AP %pM, disconnecting.\n",
|
|
bssid);
|
|
ieee80211_sta_connection_lost(sdata, bssid,
|
|
WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
|
|
false);
|
|
}
|
|
} else if (time_is_after_jiffies(ifmgd->probe_timeout))
|
|
run_again(sdata, ifmgd->probe_timeout);
|
|
else if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) {
|
|
mlme_dbg(sdata,
|
|
"Failed to send nullfunc to AP %pM after %dms, disconnecting\n",
|
|
bssid, probe_wait_ms);
|
|
ieee80211_sta_connection_lost(sdata, bssid,
|
|
WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false);
|
|
} else if (ifmgd->probe_send_count < max_tries) {
|
|
mlme_dbg(sdata,
|
|
"No probe response from AP %pM after %dms, try %d/%i\n",
|
|
bssid, probe_wait_ms,
|
|
ifmgd->probe_send_count, max_tries);
|
|
ieee80211_mgd_probe_ap_send(sdata);
|
|
} else {
|
|
/*
|
|
* We actually lost the connection ... or did we?
|
|
* Let's make sure!
|
|
*/
|
|
wiphy_debug(local->hw.wiphy,
|
|
"%s: No probe response from AP %pM"
|
|
" after %dms, disconnecting.\n",
|
|
sdata->name,
|
|
bssid, probe_wait_ms);
|
|
|
|
ieee80211_sta_connection_lost(sdata, bssid,
|
|
WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false);
|
|
}
|
|
}
|
|
|
|
sdata_unlock(sdata);
|
|
}
|
|
|
|
static void ieee80211_sta_bcn_mon_timer(unsigned long data)
|
|
{
|
|
struct ieee80211_sub_if_data *sdata =
|
|
(struct ieee80211_sub_if_data *) data;
|
|
struct ieee80211_local *local = sdata->local;
|
|
|
|
if (local->quiescing)
|
|
return;
|
|
|
|
sdata->u.mgd.connection_loss = false;
|
|
ieee80211_queue_work(&sdata->local->hw,
|
|
&sdata->u.mgd.beacon_connection_loss_work);
|
|
}
|
|
|
|
static void ieee80211_sta_conn_mon_timer(unsigned long data)
|
|
{
|
|
struct ieee80211_sub_if_data *sdata =
|
|
(struct ieee80211_sub_if_data *) data;
|
|
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
|
|
struct ieee80211_local *local = sdata->local;
|
|
|
|
if (local->quiescing)
|
|
return;
|
|
|
|
ieee80211_queue_work(&local->hw, &ifmgd->monitor_work);
|
|
}
|
|
|
|
static void ieee80211_sta_monitor_work(struct work_struct *work)
|
|
{
|
|
struct ieee80211_sub_if_data *sdata =
|
|
container_of(work, struct ieee80211_sub_if_data,
|
|
u.mgd.monitor_work);
|
|
|
|
ieee80211_mgd_probe_ap(sdata, false);
|
|
}
|
|
|
|
static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata)
|
|
{
|
|
u32 flags;
|
|
|
|
if (sdata->vif.type == NL80211_IFTYPE_STATION) {
|
|
__ieee80211_stop_poll(sdata);
|
|
|
|
/* let's probe the connection once */
|
|
flags = sdata->local->hw.flags;
|
|
if (!(flags & IEEE80211_HW_CONNECTION_MONITOR))
|
|
ieee80211_queue_work(&sdata->local->hw,
|
|
&sdata->u.mgd.monitor_work);
|
|
/* and do all the other regular work too */
|
|
ieee80211_queue_work(&sdata->local->hw, &sdata->work);
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata)
|
|
{
|
|
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
|
|
|
|
sdata_lock(sdata);
|
|
if (!ifmgd->associated) {
|
|
sdata_unlock(sdata);
|
|
return;
|
|
}
|
|
|
|
if (sdata->flags & IEEE80211_SDATA_DISCONNECT_RESUME) {
|
|
sdata->flags &= ~IEEE80211_SDATA_DISCONNECT_RESUME;
|
|
mlme_dbg(sdata, "driver requested disconnect after resume\n");
|
|
ieee80211_sta_connection_lost(sdata,
|
|
ifmgd->associated->bssid,
|
|
WLAN_REASON_UNSPECIFIED,
|
|
true);
|
|
sdata_unlock(sdata);
|
|
return;
|
|
}
|
|
sdata_unlock(sdata);
|
|
}
|
|
#endif
|
|
|
|
/* interface setup */
|
|
void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata)
|
|
{
|
|
struct ieee80211_if_managed *ifmgd;
|
|
|
|
ifmgd = &sdata->u.mgd;
|
|
INIT_WORK(&ifmgd->monitor_work, ieee80211_sta_monitor_work);
|
|
INIT_WORK(&ifmgd->chswitch_work, ieee80211_chswitch_work);
|
|
INIT_WORK(&ifmgd->beacon_connection_loss_work,
|
|
ieee80211_beacon_connection_loss_work);
|
|
INIT_WORK(&ifmgd->csa_connection_drop_work,
|
|
ieee80211_csa_connection_drop_work);
|
|
INIT_WORK(&ifmgd->request_smps_work, ieee80211_request_smps_mgd_work);
|
|
setup_timer(&ifmgd->timer, ieee80211_sta_timer,
|
|
(unsigned long) sdata);
|
|
setup_timer(&ifmgd->bcn_mon_timer, ieee80211_sta_bcn_mon_timer,
|
|
(unsigned long) sdata);
|
|
setup_timer(&ifmgd->conn_mon_timer, ieee80211_sta_conn_mon_timer,
|
|
(unsigned long) sdata);
|
|
setup_timer(&ifmgd->chswitch_timer, ieee80211_chswitch_timer,
|
|
(unsigned long) sdata);
|
|
|
|
ifmgd->flags = 0;
|
|
ifmgd->powersave = sdata->wdev.ps;
|
|
ifmgd->uapsd_queues = sdata->local->hw.uapsd_queues;
|
|
ifmgd->uapsd_max_sp_len = sdata->local->hw.uapsd_max_sp_len;
|
|
ifmgd->p2p_noa_index = -1;
|
|
|
|
if (sdata->local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS)
|
|
ifmgd->req_smps = IEEE80211_SMPS_AUTOMATIC;
|
|
else
|
|
ifmgd->req_smps = IEEE80211_SMPS_OFF;
|
|
}
|
|
|
|
/* scan finished notification */
|
|
void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local)
|
|
{
|
|
struct ieee80211_sub_if_data *sdata;
|
|
|
|
/* Restart STA timers */
|
|
rcu_read_lock();
|
|
list_for_each_entry_rcu(sdata, &local->interfaces, list) {
|
|
if (ieee80211_sdata_running(sdata))
|
|
ieee80211_restart_sta_timer(sdata);
|
|
}
|
|
rcu_read_unlock();
|
|
}
|
|
|
|
int ieee80211_max_network_latency(struct notifier_block *nb,
|
|
unsigned long data, void *dummy)
|
|
{
|
|
s32 latency_usec = (s32) data;
|
|
struct ieee80211_local *local =
|
|
container_of(nb, struct ieee80211_local,
|
|
network_latency_notifier);
|
|
|
|
mutex_lock(&local->iflist_mtx);
|
|
ieee80211_recalc_ps(local, latency_usec);
|
|
mutex_unlock(&local->iflist_mtx);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u8 ieee80211_ht_vht_rx_chains(struct ieee80211_sub_if_data *sdata,
|
|
struct cfg80211_bss *cbss)
|
|
{
|
|
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
|
|
const u8 *ht_cap_ie, *vht_cap_ie;
|
|
const struct ieee80211_ht_cap *ht_cap;
|
|
const struct ieee80211_vht_cap *vht_cap;
|
|
u8 chains = 1;
|
|
|
|
if (ifmgd->flags & IEEE80211_STA_DISABLE_HT)
|
|
return chains;
|
|
|
|
ht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_CAPABILITY);
|
|
if (ht_cap_ie && ht_cap_ie[1] >= sizeof(*ht_cap)) {
|
|
ht_cap = (void *)(ht_cap_ie + 2);
|
|
chains = ieee80211_mcs_to_chains(&ht_cap->mcs);
|
|
/*
|
|
* TODO: use "Tx Maximum Number Spatial Streams Supported" and
|
|
* "Tx Unequal Modulation Supported" fields.
|
|
*/
|
|
}
|
|
|
|
if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT)
|
|
return chains;
|
|
|
|
vht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_VHT_CAPABILITY);
|
|
if (vht_cap_ie && vht_cap_ie[1] >= sizeof(*vht_cap)) {
|
|
u8 nss;
|
|
u16 tx_mcs_map;
|
|
|
|
vht_cap = (void *)(vht_cap_ie + 2);
|
|
tx_mcs_map = le16_to_cpu(vht_cap->supp_mcs.tx_mcs_map);
|
|
for (nss = 8; nss > 0; nss--) {
|
|
if (((tx_mcs_map >> (2 * (nss - 1))) & 3) !=
|
|
IEEE80211_VHT_MCS_NOT_SUPPORTED)
|
|
break;
|
|
}
|
|
/* TODO: use "Tx Highest Supported Long GI Data Rate" field? */
|
|
chains = max(chains, nss);
|
|
}
|
|
|
|
return chains;
|
|
}
|
|
|
|
static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata,
|
|
struct cfg80211_bss *cbss)
|
|
{
|
|
struct ieee80211_local *local = sdata->local;
|
|
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
|
|
const struct ieee80211_ht_operation *ht_oper = NULL;
|
|
const struct ieee80211_vht_operation *vht_oper = NULL;
|
|
struct ieee80211_supported_band *sband;
|
|
struct cfg80211_chan_def chandef;
|
|
int ret;
|
|
|
|
sband = local->hw.wiphy->bands[cbss->channel->band];
|
|
|
|
ifmgd->flags &= ~(IEEE80211_STA_DISABLE_40MHZ |
|
|
IEEE80211_STA_DISABLE_80P80MHZ |
|
|
IEEE80211_STA_DISABLE_160MHZ);
|
|
|
|
rcu_read_lock();
|
|
|
|
if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
|
|
sband->ht_cap.ht_supported) {
|
|
const u8 *ht_oper_ie, *ht_cap;
|
|
|
|
ht_oper_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_OPERATION);
|
|
if (ht_oper_ie && ht_oper_ie[1] >= sizeof(*ht_oper))
|
|
ht_oper = (void *)(ht_oper_ie + 2);
|
|
|
|
ht_cap = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_CAPABILITY);
|
|
if (!ht_cap || ht_cap[1] < sizeof(struct ieee80211_ht_cap)) {
|
|
ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
|
|
ht_oper = NULL;
|
|
}
|
|
}
|
|
|
|
if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
|
|
sband->vht_cap.vht_supported) {
|
|
const u8 *vht_oper_ie, *vht_cap;
|
|
|
|
vht_oper_ie = ieee80211_bss_get_ie(cbss,
|
|
WLAN_EID_VHT_OPERATION);
|
|
if (vht_oper_ie && vht_oper_ie[1] >= sizeof(*vht_oper))
|
|
vht_oper = (void *)(vht_oper_ie + 2);
|
|
if (vht_oper && !ht_oper) {
|
|
vht_oper = NULL;
|
|
sdata_info(sdata,
|
|
"AP advertised VHT without HT, disabling both\n");
|
|
ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
|
|
ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
|
|
}
|
|
|
|
vht_cap = ieee80211_bss_get_ie(cbss, WLAN_EID_VHT_CAPABILITY);
|
|
if (!vht_cap || vht_cap[1] < sizeof(struct ieee80211_vht_cap)) {
|
|
ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
|
|
vht_oper = NULL;
|
|
}
|
|
}
|
|
|
|
ifmgd->flags |= ieee80211_determine_chantype(sdata, sband,
|
|
cbss->channel,
|
|
ht_oper, vht_oper,
|
|
&chandef, false);
|
|
|
|
sdata->needed_rx_chains = min(ieee80211_ht_vht_rx_chains(sdata, cbss),
|
|
local->rx_chains);
|
|
|
|
rcu_read_unlock();
|
|
|
|
/* will change later if needed */
|
|
sdata->smps_mode = IEEE80211_SMPS_OFF;
|
|
|
|
mutex_lock(&local->mtx);
|
|
/*
|
|
* If this fails (possibly due to channel context sharing
|
|
* on incompatible channels, e.g. 80+80 and 160 sharing the
|
|
* same control channel) try to use a smaller bandwidth.
|
|
*/
|
|
ret = ieee80211_vif_use_channel(sdata, &chandef,
|
|
IEEE80211_CHANCTX_SHARED);
|
|
|
|
/* don't downgrade for 5 and 10 MHz channels, though. */
|
|
if (chandef.width == NL80211_CHAN_WIDTH_5 ||
|
|
chandef.width == NL80211_CHAN_WIDTH_10)
|
|
goto out;
|
|
|
|
while (ret && chandef.width != NL80211_CHAN_WIDTH_20_NOHT) {
|
|
ifmgd->flags |= ieee80211_chandef_downgrade(&chandef);
|
|
ret = ieee80211_vif_use_channel(sdata, &chandef,
|
|
IEEE80211_CHANCTX_SHARED);
|
|
}
|
|
out:
|
|
mutex_unlock(&local->mtx);
|
|
return ret;
|
|
}
|
|
|
|
static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata,
|
|
struct cfg80211_bss *cbss, bool assoc)
|
|
{
|
|
struct ieee80211_local *local = sdata->local;
|
|
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
|
|
struct ieee80211_bss *bss = (void *)cbss->priv;
|
|
struct sta_info *new_sta = NULL;
|
|
bool have_sta = false;
|
|
int err;
|
|
|
|
if (WARN_ON(!ifmgd->auth_data && !ifmgd->assoc_data))
|
|
return -EINVAL;
|
|
|
|
if (assoc) {
|
|
rcu_read_lock();
|
|
have_sta = sta_info_get(sdata, cbss->bssid);
|
|
rcu_read_unlock();
|
|
}
|
|
|
|
if (!have_sta) {
|
|
new_sta = sta_info_alloc(sdata, cbss->bssid, GFP_KERNEL);
|
|
if (!new_sta)
|
|
return -ENOMEM;
|
|
}
|
|
if (new_sta) {
|
|
u32 rates = 0, basic_rates = 0;
|
|
bool have_higher_than_11mbit;
|
|
int min_rate = INT_MAX, min_rate_index = -1;
|
|
struct ieee80211_chanctx_conf *chanctx_conf;
|
|
struct ieee80211_supported_band *sband;
|
|
const struct cfg80211_bss_ies *ies;
|
|
int shift;
|
|
u32 rate_flags;
|
|
|
|
sband = local->hw.wiphy->bands[cbss->channel->band];
|
|
|
|
err = ieee80211_prep_channel(sdata, cbss);
|
|
if (err) {
|
|
sta_info_free(local, new_sta);
|
|
return -EINVAL;
|
|
}
|
|
shift = ieee80211_vif_get_shift(&sdata->vif);
|
|
|
|
rcu_read_lock();
|
|
chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
|
|
if (WARN_ON(!chanctx_conf)) {
|
|
rcu_read_unlock();
|
|
return -EINVAL;
|
|
}
|
|
rate_flags = ieee80211_chandef_rate_flags(&chanctx_conf->def);
|
|
rcu_read_unlock();
|
|
|
|
ieee80211_get_rates(sband, bss->supp_rates,
|
|
bss->supp_rates_len,
|
|
&rates, &basic_rates,
|
|
&have_higher_than_11mbit,
|
|
&min_rate, &min_rate_index,
|
|
shift, rate_flags);
|
|
|
|
/*
|
|
* This used to be a workaround for basic rates missing
|
|
* in the association response frame. Now that we no
|
|
* longer use the basic rates from there, it probably
|
|
* doesn't happen any more, but keep the workaround so
|
|
* in case some *other* APs are buggy in different ways
|
|
* we can connect -- with a warning.
|
|
*/
|
|
if (!basic_rates && min_rate_index >= 0) {
|
|
sdata_info(sdata,
|
|
"No basic rates, using min rate instead\n");
|
|
basic_rates = BIT(min_rate_index);
|
|
}
|
|
|
|
new_sta->sta.supp_rates[cbss->channel->band] = rates;
|
|
sdata->vif.bss_conf.basic_rates = basic_rates;
|
|
|
|
/* cf. IEEE 802.11 9.2.12 */
|
|
if (cbss->channel->band == IEEE80211_BAND_2GHZ &&
|
|
have_higher_than_11mbit)
|
|
sdata->flags |= IEEE80211_SDATA_OPERATING_GMODE;
|
|
else
|
|
sdata->flags &= ~IEEE80211_SDATA_OPERATING_GMODE;
|
|
|
|
memcpy(ifmgd->bssid, cbss->bssid, ETH_ALEN);
|
|
|
|
/* set timing information */
|
|
sdata->vif.bss_conf.beacon_int = cbss->beacon_interval;
|
|
rcu_read_lock();
|
|
ies = rcu_dereference(cbss->beacon_ies);
|
|
if (ies) {
|
|
const u8 *tim_ie;
|
|
|
|
sdata->vif.bss_conf.sync_tsf = ies->tsf;
|
|
sdata->vif.bss_conf.sync_device_ts =
|
|
bss->device_ts_beacon;
|
|
tim_ie = cfg80211_find_ie(WLAN_EID_TIM,
|
|
ies->data, ies->len);
|
|
if (tim_ie && tim_ie[1] >= 2)
|
|
sdata->vif.bss_conf.sync_dtim_count = tim_ie[2];
|
|
else
|
|
sdata->vif.bss_conf.sync_dtim_count = 0;
|
|
} else if (!(local->hw.flags &
|
|
IEEE80211_HW_TIMING_BEACON_ONLY)) {
|
|
ies = rcu_dereference(cbss->proberesp_ies);
|
|
/* must be non-NULL since beacon IEs were NULL */
|
|
sdata->vif.bss_conf.sync_tsf = ies->tsf;
|
|
sdata->vif.bss_conf.sync_device_ts =
|
|
bss->device_ts_presp;
|
|
sdata->vif.bss_conf.sync_dtim_count = 0;
|
|
} else {
|
|
sdata->vif.bss_conf.sync_tsf = 0;
|
|
sdata->vif.bss_conf.sync_device_ts = 0;
|
|
sdata->vif.bss_conf.sync_dtim_count = 0;
|
|
}
|
|
rcu_read_unlock();
|
|
|
|
/* tell driver about BSSID, basic rates and timing */
|
|
ieee80211_bss_info_change_notify(sdata,
|
|
BSS_CHANGED_BSSID | BSS_CHANGED_BASIC_RATES |
|
|
BSS_CHANGED_BEACON_INT);
|
|
|
|
if (assoc)
|
|
sta_info_pre_move_state(new_sta, IEEE80211_STA_AUTH);
|
|
|
|
err = sta_info_insert(new_sta);
|
|
new_sta = NULL;
|
|
if (err) {
|
|
sdata_info(sdata,
|
|
"failed to insert STA entry for the AP (error %d)\n",
|
|
err);
|
|
return err;
|
|
}
|
|
} else
|
|
WARN_ON_ONCE(!ether_addr_equal(ifmgd->bssid, cbss->bssid));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* config hooks */
|
|
int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata,
|
|
struct cfg80211_auth_request *req)
|
|
{
|
|
struct ieee80211_local *local = sdata->local;
|
|
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
|
|
struct ieee80211_mgd_auth_data *auth_data;
|
|
u16 auth_alg;
|
|
int err;
|
|
|
|
/* prepare auth data structure */
|
|
|
|
switch (req->auth_type) {
|
|
case NL80211_AUTHTYPE_OPEN_SYSTEM:
|
|
auth_alg = WLAN_AUTH_OPEN;
|
|
break;
|
|
case NL80211_AUTHTYPE_SHARED_KEY:
|
|
if (IS_ERR(local->wep_tx_tfm))
|
|
return -EOPNOTSUPP;
|
|
auth_alg = WLAN_AUTH_SHARED_KEY;
|
|
break;
|
|
case NL80211_AUTHTYPE_FT:
|
|
auth_alg = WLAN_AUTH_FT;
|
|
break;
|
|
case NL80211_AUTHTYPE_NETWORK_EAP:
|
|
auth_alg = WLAN_AUTH_LEAP;
|
|
break;
|
|
case NL80211_AUTHTYPE_SAE:
|
|
auth_alg = WLAN_AUTH_SAE;
|
|
break;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
auth_data = kzalloc(sizeof(*auth_data) + req->sae_data_len +
|
|
req->ie_len, GFP_KERNEL);
|
|
if (!auth_data)
|
|
return -ENOMEM;
|
|
|
|
auth_data->bss = req->bss;
|
|
|
|
if (req->sae_data_len >= 4) {
|
|
__le16 *pos = (__le16 *) req->sae_data;
|
|
auth_data->sae_trans = le16_to_cpu(pos[0]);
|
|
auth_data->sae_status = le16_to_cpu(pos[1]);
|
|
memcpy(auth_data->data, req->sae_data + 4,
|
|
req->sae_data_len - 4);
|
|
auth_data->data_len += req->sae_data_len - 4;
|
|
}
|
|
|
|
if (req->ie && req->ie_len) {
|
|
memcpy(&auth_data->data[auth_data->data_len],
|
|
req->ie, req->ie_len);
|
|
auth_data->data_len += req->ie_len;
|
|
}
|
|
|
|
if (req->key && req->key_len) {
|
|
auth_data->key_len = req->key_len;
|
|
auth_data->key_idx = req->key_idx;
|
|
memcpy(auth_data->key, req->key, req->key_len);
|
|
}
|
|
|
|
auth_data->algorithm = auth_alg;
|
|
|
|
/* try to authenticate/probe */
|
|
|
|
if ((ifmgd->auth_data && !ifmgd->auth_data->done) ||
|
|
ifmgd->assoc_data) {
|
|
err = -EBUSY;
|
|
goto err_free;
|
|
}
|
|
|
|
if (ifmgd->auth_data)
|
|
ieee80211_destroy_auth_data(sdata, false);
|
|
|
|
/* prep auth_data so we don't go into idle on disassoc */
|
|
ifmgd->auth_data = auth_data;
|
|
|
|
if (ifmgd->associated) {
|
|
u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
|
|
|
|
ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
|
|
WLAN_REASON_UNSPECIFIED,
|
|
false, frame_buf);
|
|
|
|
cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf,
|
|
sizeof(frame_buf));
|
|
}
|
|
|
|
sdata_info(sdata, "authenticate with %pM\n", req->bss->bssid);
|
|
|
|
err = ieee80211_prep_connection(sdata, req->bss, false);
|
|
if (err)
|
|
goto err_clear;
|
|
|
|
err = ieee80211_probe_auth(sdata);
|
|
if (err) {
|
|
sta_info_destroy_addr(sdata, req->bss->bssid);
|
|
goto err_clear;
|
|
}
|
|
|
|
/* hold our own reference */
|
|
cfg80211_ref_bss(local->hw.wiphy, auth_data->bss);
|
|
return 0;
|
|
|
|
err_clear:
|
|
memset(ifmgd->bssid, 0, ETH_ALEN);
|
|
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
|
|
ifmgd->auth_data = NULL;
|
|
err_free:
|
|
kfree(auth_data);
|
|
return err;
|
|
}
|
|
|
|
static bool ieee80211_usable_wmm_params(struct ieee80211_sub_if_data *sdata,
|
|
const u8 *wmm_param, int len)
|
|
{
|
|
const u8 *pos;
|
|
size_t left;
|
|
|
|
if (len < 8)
|
|
return false;
|
|
|
|
if (wmm_param[5] != 1 /* version */)
|
|
return false;
|
|
|
|
pos = wmm_param + 8;
|
|
left = len - 8;
|
|
|
|
for (; left >= 4; left -= 4, pos += 4) {
|
|
u8 aifsn = pos[0] & 0x0f;
|
|
u8 ecwmin = pos[1] & 0x0f;
|
|
u8 ecwmax = (pos[1] & 0xf0) >> 4;
|
|
int aci = (pos[0] >> 5) & 0x03;
|
|
|
|
if (aifsn < 2) {
|
|
sdata_info(sdata,
|
|
"AP has invalid WMM params (AIFSN=%d for ACI %d), disabling WMM\n",
|
|
aifsn, aci);
|
|
return false;
|
|
}
|
|
if (ecwmin > ecwmax) {
|
|
sdata_info(sdata,
|
|
"AP has invalid WMM params (ECWmin/max=%d/%d for ACI %d), disabling WMM\n",
|
|
ecwmin, ecwmax, aci);
|
|
return false;
|
|
}
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
|
|
struct cfg80211_assoc_request *req)
|
|
{
|
|
struct ieee80211_local *local = sdata->local;
|
|
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
|
|
struct ieee80211_bss *bss = (void *)req->bss->priv;
|
|
struct ieee80211_mgd_assoc_data *assoc_data;
|
|
const struct cfg80211_bss_ies *beacon_ies;
|
|
struct ieee80211_supported_band *sband;
|
|
const u8 *ssidie, *ht_ie, *vht_ie;
|
|
int i, err;
|
|
|
|
assoc_data = kzalloc(sizeof(*assoc_data) + req->ie_len, GFP_KERNEL);
|
|
if (!assoc_data)
|
|
return -ENOMEM;
|
|
|
|
rcu_read_lock();
|
|
ssidie = ieee80211_bss_get_ie(req->bss, WLAN_EID_SSID);
|
|
if (!ssidie) {
|
|
rcu_read_unlock();
|
|
kfree(assoc_data);
|
|
return -EINVAL;
|
|
}
|
|
memcpy(assoc_data->ssid, ssidie + 2, ssidie[1]);
|
|
assoc_data->ssid_len = ssidie[1];
|
|
rcu_read_unlock();
|
|
|
|
if (ifmgd->associated) {
|
|
u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
|
|
|
|
ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
|
|
WLAN_REASON_UNSPECIFIED,
|
|
false, frame_buf);
|
|
|
|
cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf,
|
|
sizeof(frame_buf));
|
|
}
|
|
|
|
if (ifmgd->auth_data && !ifmgd->auth_data->done) {
|
|
err = -EBUSY;
|
|
goto err_free;
|
|
}
|
|
|
|
if (ifmgd->assoc_data) {
|
|
err = -EBUSY;
|
|
goto err_free;
|
|
}
|
|
|
|
if (ifmgd->auth_data) {
|
|
bool match;
|
|
|
|
/* keep sta info, bssid if matching */
|
|
match = ether_addr_equal(ifmgd->bssid, req->bss->bssid);
|
|
ieee80211_destroy_auth_data(sdata, match);
|
|
}
|
|
|
|
/* prepare assoc data */
|
|
|
|
ifmgd->beacon_crc_valid = false;
|
|
|
|
assoc_data->wmm = bss->wmm_used &&
|
|
(local->hw.queues >= IEEE80211_NUM_ACS);
|
|
if (assoc_data->wmm) {
|
|
/* try to check validity of WMM params IE */
|
|
const struct cfg80211_bss_ies *ies;
|
|
const u8 *wp, *start, *end;
|
|
|
|
rcu_read_lock();
|
|
ies = rcu_dereference(req->bss->ies);
|
|
start = ies->data;
|
|
end = start + ies->len;
|
|
|
|
while (true) {
|
|
wp = cfg80211_find_vendor_ie(
|
|
WLAN_OUI_MICROSOFT,
|
|
WLAN_OUI_TYPE_MICROSOFT_WMM,
|
|
start, end - start);
|
|
if (!wp)
|
|
break;
|
|
start = wp + wp[1] + 2;
|
|
/* if this IE is too short, try the next */
|
|
if (wp[1] <= 4)
|
|
continue;
|
|
/* if this IE is WMM params, we found what we wanted */
|
|
if (wp[6] == 1)
|
|
break;
|
|
}
|
|
|
|
if (!wp || !ieee80211_usable_wmm_params(sdata, wp + 2,
|
|
wp[1] - 2)) {
|
|
assoc_data->wmm = false;
|
|
ifmgd->flags |= IEEE80211_STA_DISABLE_WMM;
|
|
}
|
|
rcu_read_unlock();
|
|
}
|
|
|
|
/*
|
|
* IEEE802.11n does not allow TKIP/WEP as pairwise ciphers in HT mode.
|
|
* We still associate in non-HT mode (11a/b/g) if any one of these
|
|
* ciphers is configured as pairwise.
|
|
* We can set this to true for non-11n hardware, that'll be checked
|
|
* separately along with the peer capabilities.
|
|
*/
|
|
for (i = 0; i < req->crypto.n_ciphers_pairwise; i++) {
|
|
if (req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP40 ||
|
|
req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_TKIP ||
|
|
req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP104) {
|
|
ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
|
|
ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
|
|
netdev_info(sdata->dev,
|
|
"disabling HT/VHT due to WEP/TKIP use\n");
|
|
}
|
|
}
|
|
|
|
if (req->flags & ASSOC_REQ_DISABLE_HT) {
|
|
ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
|
|
ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
|
|
}
|
|
|
|
if (req->flags & ASSOC_REQ_DISABLE_VHT)
|
|
ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
|
|
|
|
/* Also disable HT if we don't support it or the AP doesn't use WMM */
|
|
sband = local->hw.wiphy->bands[req->bss->channel->band];
|
|
if (!sband->ht_cap.ht_supported ||
|
|
local->hw.queues < IEEE80211_NUM_ACS || !bss->wmm_used ||
|
|
ifmgd->flags & IEEE80211_STA_DISABLE_WMM) {
|
|
ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
|
|
if (!bss->wmm_used &&
|
|
!(ifmgd->flags & IEEE80211_STA_DISABLE_WMM))
|
|
netdev_info(sdata->dev,
|
|
"disabling HT as WMM/QoS is not supported by the AP\n");
|
|
}
|
|
|
|
/* disable VHT if we don't support it or the AP doesn't use WMM */
|
|
if (!sband->vht_cap.vht_supported ||
|
|
local->hw.queues < IEEE80211_NUM_ACS || !bss->wmm_used ||
|
|
ifmgd->flags & IEEE80211_STA_DISABLE_WMM) {
|
|
ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
|
|
if (!bss->wmm_used &&
|
|
!(ifmgd->flags & IEEE80211_STA_DISABLE_WMM))
|
|
netdev_info(sdata->dev,
|
|
"disabling VHT as WMM/QoS is not supported by the AP\n");
|
|
}
|
|
|
|
memcpy(&ifmgd->ht_capa, &req->ht_capa, sizeof(ifmgd->ht_capa));
|
|
memcpy(&ifmgd->ht_capa_mask, &req->ht_capa_mask,
|
|
sizeof(ifmgd->ht_capa_mask));
|
|
|
|
memcpy(&ifmgd->vht_capa, &req->vht_capa, sizeof(ifmgd->vht_capa));
|
|
memcpy(&ifmgd->vht_capa_mask, &req->vht_capa_mask,
|
|
sizeof(ifmgd->vht_capa_mask));
|
|
|
|
if (req->ie && req->ie_len) {
|
|
memcpy(assoc_data->ie, req->ie, req->ie_len);
|
|
assoc_data->ie_len = req->ie_len;
|
|
}
|
|
|
|
assoc_data->bss = req->bss;
|
|
|
|
if (ifmgd->req_smps == IEEE80211_SMPS_AUTOMATIC) {
|
|
if (ifmgd->powersave)
|
|
sdata->smps_mode = IEEE80211_SMPS_DYNAMIC;
|
|
else
|
|
sdata->smps_mode = IEEE80211_SMPS_OFF;
|
|
} else
|
|
sdata->smps_mode = ifmgd->req_smps;
|
|
|
|
assoc_data->capability = req->bss->capability;
|
|
assoc_data->supp_rates = bss->supp_rates;
|
|
assoc_data->supp_rates_len = bss->supp_rates_len;
|
|
|
|
rcu_read_lock();
|
|
ht_ie = ieee80211_bss_get_ie(req->bss, WLAN_EID_HT_OPERATION);
|
|
if (ht_ie && ht_ie[1] >= sizeof(struct ieee80211_ht_operation))
|
|
assoc_data->ap_ht_param =
|
|
((struct ieee80211_ht_operation *)(ht_ie + 2))->ht_param;
|
|
else
|
|
ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
|
|
vht_ie = ieee80211_bss_get_ie(req->bss, WLAN_EID_VHT_CAPABILITY);
|
|
if (vht_ie && vht_ie[1] >= sizeof(struct ieee80211_vht_cap))
|
|
memcpy(&assoc_data->ap_vht_cap, vht_ie + 2,
|
|
sizeof(struct ieee80211_vht_cap));
|
|
else
|
|
ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
|
|
rcu_read_unlock();
|
|
|
|
if (bss->wmm_used && bss->uapsd_supported &&
|
|
(sdata->local->hw.flags & IEEE80211_HW_SUPPORTS_UAPSD) &&
|
|
sdata->wmm_acm != 0xff) {
|
|
assoc_data->uapsd = true;
|
|
ifmgd->flags |= IEEE80211_STA_UAPSD_ENABLED;
|
|
} else {
|
|
assoc_data->uapsd = false;
|
|
ifmgd->flags &= ~IEEE80211_STA_UAPSD_ENABLED;
|
|
}
|
|
|
|
if (req->prev_bssid)
|
|
memcpy(assoc_data->prev_bssid, req->prev_bssid, ETH_ALEN);
|
|
|
|
if (req->use_mfp) {
|
|
ifmgd->mfp = IEEE80211_MFP_REQUIRED;
|
|
ifmgd->flags |= IEEE80211_STA_MFP_ENABLED;
|
|
} else {
|
|
ifmgd->mfp = IEEE80211_MFP_DISABLED;
|
|
ifmgd->flags &= ~IEEE80211_STA_MFP_ENABLED;
|
|
}
|
|
|
|
if (req->crypto.control_port)
|
|
ifmgd->flags |= IEEE80211_STA_CONTROL_PORT;
|
|
else
|
|
ifmgd->flags &= ~IEEE80211_STA_CONTROL_PORT;
|
|
|
|
sdata->control_port_protocol = req->crypto.control_port_ethertype;
|
|
sdata->control_port_no_encrypt = req->crypto.control_port_no_encrypt;
|
|
sdata->encrypt_headroom = ieee80211_cs_headroom(local, &req->crypto,
|
|
sdata->vif.type);
|
|
|
|
/* kick off associate process */
|
|
|
|
ifmgd->assoc_data = assoc_data;
|
|
ifmgd->dtim_period = 0;
|
|
ifmgd->have_beacon = false;
|
|
|
|
err = ieee80211_prep_connection(sdata, req->bss, true);
|
|
if (err)
|
|
goto err_clear;
|
|
|
|
rcu_read_lock();
|
|
beacon_ies = rcu_dereference(req->bss->beacon_ies);
|
|
|
|
if (sdata->local->hw.flags & IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC &&
|
|
!beacon_ies) {
|
|
/*
|
|
* Wait up to one beacon interval ...
|
|
* should this be more if we miss one?
|
|
*/
|
|
sdata_info(sdata, "waiting for beacon from %pM\n",
|
|
ifmgd->bssid);
|
|
assoc_data->timeout = TU_TO_EXP_TIME(req->bss->beacon_interval);
|
|
assoc_data->timeout_started = true;
|
|
assoc_data->need_beacon = true;
|
|
} else if (beacon_ies) {
|
|
const u8 *tim_ie = cfg80211_find_ie(WLAN_EID_TIM,
|
|
beacon_ies->data,
|
|
beacon_ies->len);
|
|
u8 dtim_count = 0;
|
|
|
|
if (tim_ie && tim_ie[1] >= sizeof(struct ieee80211_tim_ie)) {
|
|
const struct ieee80211_tim_ie *tim;
|
|
tim = (void *)(tim_ie + 2);
|
|
ifmgd->dtim_period = tim->dtim_period;
|
|
dtim_count = tim->dtim_count;
|
|
}
|
|
ifmgd->have_beacon = true;
|
|
assoc_data->timeout = jiffies;
|
|
assoc_data->timeout_started = true;
|
|
|
|
if (local->hw.flags & IEEE80211_HW_TIMING_BEACON_ONLY) {
|
|
sdata->vif.bss_conf.sync_tsf = beacon_ies->tsf;
|
|
sdata->vif.bss_conf.sync_device_ts =
|
|
bss->device_ts_beacon;
|
|
sdata->vif.bss_conf.sync_dtim_count = dtim_count;
|
|
}
|
|
} else {
|
|
assoc_data->timeout = jiffies;
|
|
assoc_data->timeout_started = true;
|
|
}
|
|
rcu_read_unlock();
|
|
|
|
run_again(sdata, assoc_data->timeout);
|
|
|
|
if (bss->corrupt_data) {
|
|
char *corrupt_type = "data";
|
|
if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_BEACON) {
|
|
if (bss->corrupt_data &
|
|
IEEE80211_BSS_CORRUPT_PROBE_RESP)
|
|
corrupt_type = "beacon and probe response";
|
|
else
|
|
corrupt_type = "beacon";
|
|
} else if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_PROBE_RESP)
|
|
corrupt_type = "probe response";
|
|
sdata_info(sdata, "associating with AP with corrupt %s\n",
|
|
corrupt_type);
|
|
}
|
|
|
|
return 0;
|
|
err_clear:
|
|
memset(ifmgd->bssid, 0, ETH_ALEN);
|
|
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
|
|
ifmgd->assoc_data = NULL;
|
|
err_free:
|
|
kfree(assoc_data);
|
|
return err;
|
|
}
|
|
|
|
int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata,
|
|
struct cfg80211_deauth_request *req)
|
|
{
|
|
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
|
|
u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
|
|
bool tx = !req->local_state_change;
|
|
bool report_frame = false;
|
|
|
|
sdata_info(sdata,
|
|
"deauthenticating from %pM by local choice (reason=%d)\n",
|
|
req->bssid, req->reason_code);
|
|
|
|
if (ifmgd->auth_data) {
|
|
drv_mgd_prepare_tx(sdata->local, sdata);
|
|
ieee80211_send_deauth_disassoc(sdata, req->bssid,
|
|
IEEE80211_STYPE_DEAUTH,
|
|
req->reason_code, tx,
|
|
frame_buf);
|
|
ieee80211_destroy_auth_data(sdata, false);
|
|
|
|
report_frame = true;
|
|
goto out;
|
|
}
|
|
|
|
if (ifmgd->associated &&
|
|
ether_addr_equal(ifmgd->associated->bssid, req->bssid)) {
|
|
ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
|
|
req->reason_code, tx, frame_buf);
|
|
report_frame = true;
|
|
}
|
|
|
|
out:
|
|
if (report_frame)
|
|
cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf,
|
|
IEEE80211_DEAUTH_FRAME_LEN);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata,
|
|
struct cfg80211_disassoc_request *req)
|
|
{
|
|
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
|
|
u8 bssid[ETH_ALEN];
|
|
u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
|
|
|
|
/*
|
|
* cfg80211 should catch this ... but it's racy since
|
|
* we can receive a disassoc frame, process it, hand it
|
|
* to cfg80211 while that's in a locked section already
|
|
* trying to tell us that the user wants to disconnect.
|
|
*/
|
|
if (ifmgd->associated != req->bss)
|
|
return -ENOLINK;
|
|
|
|
sdata_info(sdata,
|
|
"disassociating from %pM by local choice (reason=%d)\n",
|
|
req->bss->bssid, req->reason_code);
|
|
|
|
memcpy(bssid, req->bss->bssid, ETH_ALEN);
|
|
ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DISASSOC,
|
|
req->reason_code, !req->local_state_change,
|
|
frame_buf);
|
|
|
|
cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf,
|
|
IEEE80211_DEAUTH_FRAME_LEN);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata)
|
|
{
|
|
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
|
|
|
|
/*
|
|
* Make sure some work items will not run after this,
|
|
* they will not do anything but might not have been
|
|
* cancelled when disconnecting.
|
|
*/
|
|
cancel_work_sync(&ifmgd->monitor_work);
|
|
cancel_work_sync(&ifmgd->beacon_connection_loss_work);
|
|
cancel_work_sync(&ifmgd->request_smps_work);
|
|
cancel_work_sync(&ifmgd->csa_connection_drop_work);
|
|
cancel_work_sync(&ifmgd->chswitch_work);
|
|
|
|
sdata_lock(sdata);
|
|
if (ifmgd->assoc_data) {
|
|
struct cfg80211_bss *bss = ifmgd->assoc_data->bss;
|
|
ieee80211_destroy_assoc_data(sdata, false);
|
|
cfg80211_assoc_timeout(sdata->dev, bss);
|
|
}
|
|
if (ifmgd->auth_data)
|
|
ieee80211_destroy_auth_data(sdata, false);
|
|
del_timer_sync(&ifmgd->timer);
|
|
sdata_unlock(sdata);
|
|
}
|
|
|
|
void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif,
|
|
enum nl80211_cqm_rssi_threshold_event rssi_event,
|
|
gfp_t gfp)
|
|
{
|
|
struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
|
|
|
|
trace_api_cqm_rssi_notify(sdata, rssi_event);
|
|
|
|
cfg80211_cqm_rssi_notify(sdata->dev, rssi_event, gfp);
|
|
}
|
|
EXPORT_SYMBOL(ieee80211_cqm_rssi_notify);
|