..
am35x.c
usb: musb: Change end point selection to use new IO access
2014-11-25 08:47:06 -06:00
blackfin.c
usb: musb: blackfin: remove incorrect __exit_p()
2015-02-02 13:04:55 -06:00
blackfin.h
cppi_dma.c
usb: musb: dma: merge ->start/stop into create/destroy
2013-07-29 13:53:18 +03:00
cppi_dma.h
da8xx.c
usb: musb: Pass fifo_mode in platform data
2014-11-25 08:47:07 -06:00
davinci.c
usb: move the OTG state from the USB PHY to the OTG structure
2014-11-03 10:01:25 -06:00
davinci.h
jz4740.c
usb: musb: Pass fifo_mode in platform data
2014-11-25 08:47:07 -06:00
Kconfig
usb: musb: add omap-control dependency
2015-01-29 10:36:29 -06:00
Makefile
usb: musb: add support for JZ4740 usb device controller
2013-12-20 09:53:24 -06:00
musb_am335x.c
usb: musb: Fix panic upon musb_am335x module removal
2014-06-27 10:53:06 -05:00
musb_core.c
usb: musb: core: always try to recover from babble
2015-03-10 15:33:30 -05:00
musb_core.h
usb: musb: core: drop recover_work
2015-03-10 15:33:29 -05:00
musb_cppi41.c
usb: musb: cppi41: improve rx channel abort routine
2015-01-27 09:34:58 -06:00
musb_debug.h
musb_debugfs.c
Linux 3.19-rc5
2015-01-19 09:57:20 -06:00
musb_dma.h
usb: musb: introduce dma_channel.rx_packet_done
2014-06-30 14:26:24 -05:00
musb_dsps.c
usb: musb: rename ->reset() to ->recover()
2015-03-10 15:33:29 -05:00
musb_gadget_ep0.c
usb: musb: gadget: use common is_selfpowered
2015-01-29 10:35:43 -06:00
musb_gadget.c
usb: musb: gadget: get rid of stop_activity()
2015-03-09 10:38:48 -05:00
musb_gadget.h
usb: musb: add Kconfig options for HOST, GAGDET or DUAL_ROLE modes
2013-05-28 19:22:23 +03:00
musb_host.c
usb: musb: musb_host: Enable HCD_BH flag to handle urb return in bottom half
2015-02-23 00:04:52 -06:00
musb_host.h
usb: musb: fix prototype for musb_port_reset
2013-12-20 15:05:43 -06:00
musb_io.h
usb: musb: Change end point selection to use new IO access
2014-11-25 08:47:06 -06:00
musb_regs.h
usb: musb: Use IS_ENABLED for tusb6010
2014-11-25 08:47:07 -06:00
musb_virthub.c
usb: musb: fix device hotplug behind hub
2015-02-04 11:16:47 -06:00
musbhsdma.c
usb: musb: Change end point selection to use new IO access
2014-11-25 08:47:06 -06:00
musbhsdma.h
omap2430.c
usb: musb: Fix use for of_property_read_bool for disabled multipoint
2015-02-23 09:14:30 -06:00
omap2430.h
usb: start using the control module driver
2013-01-25 12:27:24 +02:00
tusb6010_omap.c
usb: musb: tusb6010: Use musb->tusb_revision instead of tusb_get_revision call.
2014-05-16 12:16:31 -05:00
tusb6010.c
usb: musb: Change end point selection to use new IO access
2014-11-25 08:47:06 -06:00
tusb6010.h
usb: musb: tusb6010: Use musb->tusb_revision instead of tusb_get_revision call.
2014-05-16 12:16:31 -05:00
ux500_dma.c
usb: musb: Change to use new IO access
2014-11-25 08:47:06 -06:00
ux500.c
usb: musb: Pass fifo_mode in platform data
2014-11-25 08:47:07 -06:00