forked from Minki/linux
edf2194dc9
Document the devicetree bindings for the interrupt controller on Microchip PIC32 class devices. Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Acked-by: Rob Herring <robh@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12093/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
68 lines
2.1 KiB
Plaintext
68 lines
2.1 KiB
Plaintext
Microchip PIC32 Interrupt Controller
|
|
====================================
|
|
|
|
The Microchip PIC32 contains an Enhanced Vectored Interrupt Controller (EVIC).
|
|
It handles all internal and external interrupts. This controller exists outside
|
|
of the CPU and is the arbitrator of all interrupts (including interrupts from
|
|
the CPU itself) before they are presented to the CPU.
|
|
|
|
External interrupts have a software configurable edge polarity. Non external
|
|
interrupts have a type and polarity that is determined by the source of the
|
|
interrupt.
|
|
|
|
Required properties
|
|
-------------------
|
|
|
|
- compatible: Should be "microchip,pic32mzda-evic"
|
|
- reg: Specifies physical base address and size of register range.
|
|
- interrupt-controller: Identifies the node as an interrupt controller.
|
|
- #interrupt cells: Specifies the number of cells used to encode an interrupt
|
|
source connected to this controller. The value shall be 2 and interrupt
|
|
descriptor shall have the following format:
|
|
|
|
<hw_irq irq_type>
|
|
|
|
hw_irq - represents the hardware interrupt number as in the data sheet.
|
|
irq_type - is used to describe the type and polarity of an interrupt. For
|
|
internal interrupts use IRQ_TYPE_EDGE_RISING for non persistent interrupts and
|
|
IRQ_TYPE_LEVEL_HIGH for persistent interrupts. For external interrupts use
|
|
IRQ_TYPE_EDGE_RISING or IRQ_TYPE_EDGE_FALLING to select the desired polarity.
|
|
|
|
Optional properties
|
|
-------------------
|
|
- microchip,external-irqs: u32 array of external interrupts with software
|
|
polarity configuration. This array corresponds to the bits in the INTCON
|
|
SFR.
|
|
|
|
Example
|
|
-------
|
|
|
|
evic: interrupt-controller@1f810000 {
|
|
compatible = "microchip,pic32mzda-evic";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x1f810000 0x1000>;
|
|
microchip,external-irqs = <3 8 13 18 23>;
|
|
};
|
|
|
|
Each device/peripheral must request its interrupt line with the associated type
|
|
and polarity.
|
|
|
|
Internal interrupt DTS snippet
|
|
------------------------------
|
|
|
|
device@1f800000 {
|
|
...
|
|
interrupts = <113 IRQ_TYPE_LEVEL_HIGH>;
|
|
...
|
|
};
|
|
|
|
External interrupt DTS snippet
|
|
------------------------------
|
|
|
|
device@1f800000 {
|
|
...
|
|
interrupts = <3 IRQ_TYPE_EDGE_RISING>;
|
|
...
|
|
};
|