Kuninori Morimoto 340371005d ASoC: rsnd: DMA start address is properly used for each DMAC ... R-Car sound uses Audio DMAC and Audio DMAC peri peri. Audio DMAC peri peri transfers data inside circuit. DMA transfer needs source / destination address, and destination address can be set via dmaengine_slave_config(). The source address can be set when starting DMAEngine. Because Audio DMAC peri peri always ignores its value, current driver always used same source address for Audio DMAC / Audio DMAC peri peri (Audio DMAC peri peri source / destination address is always fixed value) But, This is not good match for DT booting. This patch properly uses DMA start address for Audio DMAC / Audio DMAC peri peri. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>		2014-07-02 12:35:56 +01:00
..
rcar	ASoC: rsnd: DMA start address is properly used for each DMAC	2014-07-02 12:35:56 +01:00
dma-sh7760.c	ASoC: sh: Don't set unused struct snd_pcm_hardware fields	2014-01-09 14:29:44 +00:00
fsi.c	ASoC: fsi: use dmaengine_prep_dma_cyclic() for DMA transfer	2014-06-28 14:41:18 +01:00
hac.c	ASoC: ac97: Support multi-platform AC'97	2013-06-27 09:48:42 +01:00
Kconfig	ASoC: sh: Migo-R sound needs I2C	2014-05-01 13:29:54 -07:00
Makefile	ASoC: add Renesas R-Car core feature	2013-07-28 19:34:09 +01:00
migor.c	ASoC: migor: Convert to table based DAPM setup	2014-03-10 17:35:06 +00:00
sh7760-ac97.c
siu_dai.c	ASoC: sh: Use WARN_ON() instead of BUG_ON()	2013-11-07 19:55:17 +00:00
siu_pcm.c	ASoC: siu: don't use DMA device for channel filtering	2012-07-20 11:23:44 +05:30
siu.h
ssi.c	ASoC: switch over to use snd_soc_register_component() on sh4 ssi	2013-03-26 21:57:44 +00:00