leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
332d1a0373
linux/arch/x86/kernel/vmlinux.lds.S
Arvind Sankar ea3186b957 x86/build: Fix vmlinux size check on 64-bit 
Commit

  b4e0409a36 ("x86: check vmlinux limits, 64-bit")

added a check that the size of the 64-bit kernel is less than
KERNEL_IMAGE_SIZE.

The check uses (_end - _text), but this is not enough. The initial
PMD used in startup_64() (level2_kernel_pgt) can only map upto
KERNEL_IMAGE_SIZE from __START_KERNEL_map, not from _text, and the
modules area (MODULES_VADDR) starts at KERNEL_IMAGE_SIZE.

The correct check is what is currently done for 32-bit, since
LOAD_OFFSET is defined appropriately for the two architectures. Just
check (_end - LOAD_OFFSET) against KERNEL_IMAGE_SIZE unconditionally.

Note that on 32-bit, the limit is not strict: KERNEL_IMAGE_SIZE is not
really used by the main kernel. The higher the kernel is located, the
less the space available for the vmalloc area. However, it is used by
KASLR in the compressed stub to limit the maximum address of the kernel
to a safe value.

Clean up various comments to clarify that despite the name,
KERNEL_IMAGE_SIZE is not a limit on the size of the kernel image, but a
limit on the maximum virtual address that the image can occupy.

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201029161903.2553528-1-nivedita@alum.mit.edu
2020-10-29 21:54:35 +01:00

487 lines
12 KiB
ArmAsm
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0 */
/*
* ld script for the x86 kernel
*
* Historic 32-bit version written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
*
* Modernisation, unification and other changes and fixes:
* Copyright (C) 2007-2009 Sam Ravnborg <sam@ravnborg.org>
*
*
* Don't define absolute symbols until and unless you know that symbol
* value is should remain constant even if kernel image is relocated
* at run time. Absolute symbols are not relocated. If symbol value should
* change if kernel is relocated, make the symbol section relative and
* put it inside the section definition.
*/
#ifdef CONFIG_X86_32
#define LOAD_OFFSET __PAGE_OFFSET
#else
#define LOAD_OFFSET __START_KERNEL_map
#endif
#define RUNTIME_DISCARD_EXIT
#define EMITS_PT_NOTE
#define RO_EXCEPTION_TABLE_ALIGN 16
#include <asm-generic/vmlinux.lds.h>
#include <asm/asm-offsets.h>
#include <asm/thread_info.h>
#include <asm/page_types.h>
#include <asm/orc_lookup.h>
#include <asm/cache.h>
#include <asm/boot.h>
#undef i386 /* in case the preprocessor is a 32bit one */
OUTPUT_FORMAT(CONFIG_OUTPUT_FORMAT)
#ifdef CONFIG_X86_32
OUTPUT_ARCH(i386)
ENTRY(phys_startup_32)
#else
OUTPUT_ARCH(i386:x86-64)
ENTRY(phys_startup_64)
#endif
jiffies = jiffies_64;
#if defined(CONFIG_X86_64)
/*
* On 64-bit, align RODATA to 2MB so we retain large page mappings for
* boundaries spanning kernel text, rodata and data sections.
*
* However, kernel identity mappings will have different RWX permissions
* to the pages mapping to text and to the pages padding (which are freed) the
* text section. Hence kernel identity mappings will be broken to smaller
* pages. For 64-bit, kernel text and kernel identity mappings are different,
* so we can enable protection checks as well as retain 2MB large page
* mappings for kernel text.
*/
#define X86_ALIGN_RODATA_BEGIN . = ALIGN(HPAGE_SIZE);
#define X86_ALIGN_RODATA_END \
. = ALIGN(HPAGE_SIZE); \
__end_rodata_hpage_align = .; \
__end_rodata_aligned = .;
#define ALIGN_ENTRY_TEXT_BEGIN . = ALIGN(PMD_SIZE);
#define ALIGN_ENTRY_TEXT_END . = ALIGN(PMD_SIZE);
/*
* This section contains data which will be mapped as decrypted. Memory
* encryption operates on a page basis. Make this section PMD-aligned
* to avoid splitting the pages while mapping the section early.
*
* Note: We use a separate section so that only this section gets
* decrypted to avoid exposing more than we wish.
*/
#define BSS_DECRYPTED \
. = ALIGN(PMD_SIZE); \
__start_bss_decrypted = .; \
*(.bss..decrypted); \
. = ALIGN(PAGE_SIZE); \
__start_bss_decrypted_unused = .; \
. = ALIGN(PMD_SIZE); \
__end_bss_decrypted = .; \
#else
#define X86_ALIGN_RODATA_BEGIN
#define X86_ALIGN_RODATA_END \
. = ALIGN(PAGE_SIZE); \
__end_rodata_aligned = .;
#define ALIGN_ENTRY_TEXT_BEGIN
#define ALIGN_ENTRY_TEXT_END
#define BSS_DECRYPTED
#endif
PHDRS {
text PT_LOAD FLAGS(5); /* R_E */
data PT_LOAD FLAGS(6); /* RW_ */
#ifdef CONFIG_X86_64
#ifdef CONFIG_SMP
percpu PT_LOAD FLAGS(6); /* RW_ */
#endif
init PT_LOAD FLAGS(7); /* RWE */
#endif
note PT_NOTE FLAGS(0); /* ___ */
}
SECTIONS
{
#ifdef CONFIG_X86_32
. = LOAD_OFFSET + LOAD_PHYSICAL_ADDR;
phys_startup_32 = ABSOLUTE(startup_32 - LOAD_OFFSET);
#else
. = __START_KERNEL;
phys_startup_64 = ABSOLUTE(startup_64 - LOAD_OFFSET);
#endif
/* Text and read-only data */
.text : AT(ADDR(.text) - LOAD_OFFSET) {
_text = .;
_stext = .;
/* bootstrapping code */
HEAD_TEXT
TEXT_TEXT
SCHED_TEXT
CPUIDLE_TEXT
LOCK_TEXT
KPROBES_TEXT
ALIGN_ENTRY_TEXT_BEGIN
ENTRY_TEXT
ALIGN_ENTRY_TEXT_END
SOFTIRQENTRY_TEXT
STATIC_CALL_TEXT
*(.fixup)
*(.gnu.warning)
#ifdef CONFIG_RETPOLINE
__indirect_thunk_start = .;
*(.text.__x86.indirect_thunk)
__indirect_thunk_end = .;
#endif
} :text =0xcccc
/* End of text section, which should occupy whole number of pages */
_etext = .;
. = ALIGN(PAGE_SIZE);
X86_ALIGN_RODATA_BEGIN
RO_DATA(PAGE_SIZE)
X86_ALIGN_RODATA_END
/* Data */
.data : AT(ADDR(.data) - LOAD_OFFSET) {
/* Start of data section */
_sdata = .;
/* init_task */
INIT_TASK_DATA(THREAD_SIZE)
#ifdef CONFIG_X86_32
/* 32 bit has nosave before _edata */
NOSAVE_DATA
#endif
PAGE_ALIGNED_DATA(PAGE_SIZE)
CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
DATA_DATA
CONSTRUCTORS
/* rarely changed data like cpu maps */
READ_MOSTLY_DATA(INTERNODE_CACHE_BYTES)
/* End of data section */
_edata = .;
} :data
BUG_TABLE
ORC_UNWIND_TABLE
. = ALIGN(PAGE_SIZE);
__vvar_page = .;
.vvar : AT(ADDR(.vvar) - LOAD_OFFSET) {
/* work around gold bug 13023 */
__vvar_beginning_hack = .;
/* Place all vvars at the offsets in asm/vvar.h. */
#define EMIT_VVAR(name, offset) \
. = __vvar_beginning_hack + offset; \
*(.vvar_ ## name)
#include <asm/vvar.h>
#undef EMIT_VVAR
/*
* Pad the rest of the page with zeros. Otherwise the loader
* can leave garbage here.
*/
. = __vvar_beginning_hack + PAGE_SIZE;
} :data
. = ALIGN(__vvar_page + PAGE_SIZE, PAGE_SIZE);
/* Init code and data - will be freed after init */
. = ALIGN(PAGE_SIZE);
.init.begin : AT(ADDR(.init.begin) - LOAD_OFFSET) {
__init_begin = .; /* paired with __init_end */
}
#if defined(CONFIG_X86_64) && defined(CONFIG_SMP)
/*
* percpu offsets are zero-based on SMP. PERCPU_VADDR() changes the
* output PHDR, so the next output section - .init.text - should
* start another segment - init.
*/
PERCPU_VADDR(INTERNODE_CACHE_BYTES, 0, :percpu)
ASSERT(SIZEOF(.data..percpu) < CONFIG_PHYSICAL_START,
"per-CPU data too large - increase CONFIG_PHYSICAL_START")
#endif
INIT_TEXT_SECTION(PAGE_SIZE)
#ifdef CONFIG_X86_64
:init
#endif
/*
* Section for code used exclusively before alternatives are run. All
* references to such code must be patched out by alternatives, normally
* by using X86_FEATURE_ALWAYS CPU feature bit.
*
* See static_cpu_has() for an example.
*/
.altinstr_aux : AT(ADDR(.altinstr_aux) - LOAD_OFFSET) {
*(.altinstr_aux)
}
INIT_DATA_SECTION(16)
.x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
__x86_cpu_dev_start = .;
*(.x86_cpu_dev.init)
__x86_cpu_dev_end = .;
}
#ifdef CONFIG_X86_INTEL_MID
.x86_intel_mid_dev.init : AT(ADDR(.x86_intel_mid_dev.init) - \
LOAD_OFFSET) {
__x86_intel_mid_dev_start = .;
*(.x86_intel_mid_dev.init)
__x86_intel_mid_dev_end = .;
}
#endif
/*
* start address and size of operations which during runtime
* can be patched with virtualization friendly instructions or
* baremetal native ones. Think page table operations.
* Details in paravirt_types.h
*/
. = ALIGN(8);
.parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) {
__parainstructions = .;
*(.parainstructions)
__parainstructions_end = .;
}
/*
* struct alt_inst entries. From the header (alternative.h):
* "Alternative instructions for different CPU types or capabilities"
* Think locking instructions on spinlocks.
*/
. = ALIGN(8);
.altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) {
__alt_instructions = .;
*(.altinstructions)
__alt_instructions_end = .;
}
/*
* And here are the replacement instructions. The linker sticks
* them as binary blobs. The .altinstructions has enough data to
* get the address and the length of them to patch the kernel safely.
*/
.altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) {
*(.altinstr_replacement)
}
/*
* struct iommu_table_entry entries are injected in this section.
* It is an array of IOMMUs which during run time gets sorted depending
* on its dependency order. After rootfs_initcall is complete
* this section can be safely removed.
*/
.iommu_table : AT(ADDR(.iommu_table) - LOAD_OFFSET) {
__iommu_table = .;
*(.iommu_table)
__iommu_table_end = .;
}
. = ALIGN(8);
.apicdrivers : AT(ADDR(.apicdrivers) - LOAD_OFFSET) {
__apicdrivers = .;
*(.apicdrivers);
__apicdrivers_end = .;
}
. = ALIGN(8);
/*
* .exit.text is discarded at runtime, not link time, to deal with
* references from .altinstructions
*/
.exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) {
EXIT_TEXT
}
.exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) {
EXIT_DATA
}
#if !defined(CONFIG_X86_64) || !defined(CONFIG_SMP)
PERCPU_SECTION(INTERNODE_CACHE_BYTES)
#endif
. = ALIGN(PAGE_SIZE);
/* freed after init ends here */
.init.end : AT(ADDR(.init.end) - LOAD_OFFSET) {
__init_end = .;
}
/*
* smp_locks might be freed after init
* start/end must be page aligned
*/
. = ALIGN(PAGE_SIZE);
.smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
__smp_locks = .;
*(.smp_locks)
. = ALIGN(PAGE_SIZE);
__smp_locks_end = .;
}
#ifdef CONFIG_X86_64
.data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
NOSAVE_DATA
}
#endif
/* BSS */
. = ALIGN(PAGE_SIZE);
.bss : AT(ADDR(.bss) - LOAD_OFFSET) {
__bss_start = .;
*(.bss..page_aligned)
. = ALIGN(PAGE_SIZE);
*(BSS_MAIN)
BSS_DECRYPTED
. = ALIGN(PAGE_SIZE);
__bss_stop = .;
}
/*
* The memory occupied from _text to here, __end_of_kernel_reserve, is
* automatically reserved in setup_arch(). Anything after here must be
* explicitly reserved using memblock_reserve() or it will be discarded
* and treated as available memory.
*/
__end_of_kernel_reserve = .;
. = ALIGN(PAGE_SIZE);
.brk : AT(ADDR(.brk) - LOAD_OFFSET) {
__brk_base = .;
. += 64 * 1024; /* 64k alignment slop space */
*(.brk_reservation) /* areas brk users have reserved */
__brk_limit = .;
}
. = ALIGN(PAGE_SIZE); /* keep VO_INIT_SIZE page aligned */
_end = .;
#ifdef CONFIG_AMD_MEM_ENCRYPT
/*
* Early scratch/workarea section: Lives outside of the kernel proper
* (_text - _end).
*
* Resides after _end because even though the .brk section is after
* __end_of_kernel_reserve, the .brk section is later reserved as a
* part of the kernel. Since it is located after __end_of_kernel_reserve
* it will be discarded and become part of the available memory. As
* such, it can only be used by very early boot code and must not be
* needed afterwards.
*
* Currently used by SME for performing in-place encryption of the
* kernel during boot. Resides on a 2MB boundary to simplify the
* pagetable setup used for SME in-place encryption.
*/
. = ALIGN(HPAGE_SIZE);
.init.scratch : AT(ADDR(.init.scratch) - LOAD_OFFSET) {
__init_scratch_begin = .;
*(.init.scratch)
. = ALIGN(HPAGE_SIZE);
__init_scratch_end = .;
}
#endif
STABS_DEBUG
DWARF_DEBUG
ELF_DETAILS
DISCARDS
/*
* Make sure that the .got.plt is either completely empty or it
* contains only the lazy dispatch entries.
*/
.got.plt (INFO) : { *(.got.plt) }
ASSERT(SIZEOF(.got.plt) == 0 ||
#ifdef CONFIG_X86_64
SIZEOF(.got.plt) == 0x18,
#else
SIZEOF(.got.plt) == 0xc,
#endif
"Unexpected GOT/PLT entries detected!")
/*
* Sections that should stay zero sized, which is safer to
* explicitly check instead of blindly discarding.
*/
.got : {
*(.got) *(.igot.*)
}
ASSERT(SIZEOF(.got) == 0, "Unexpected GOT entries detected!")
.plt : {
*(.plt) *(.plt.*) *(.iplt)
}
ASSERT(SIZEOF(.plt) == 0, "Unexpected run-time procedure linkages detected!")
.rel.dyn : {
*(.rel.*) *(.rel_*)
}
ASSERT(SIZEOF(.rel.dyn) == 0, "Unexpected run-time relocations (.rel) detected!")
.rela.dyn : {
*(.rela.*) *(.rela_*)
}
ASSERT(SIZEOF(.rela.dyn) == 0, "Unexpected run-time relocations (.rela) detected!")
}
/*
* The ASSERT() sink to . is intentional, for binutils 2.14 compatibility:
*/
. = ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE),
"kernel image bigger than KERNEL_IMAGE_SIZE");
#ifdef CONFIG_X86_64
/*
* Per-cpu symbols which need to be offset from __per_cpu_load
* for the boot processor.
*/
#define INIT_PER_CPU(x) init_per_cpu__##x = ABSOLUTE(x) + __per_cpu_load
INIT_PER_CPU(gdt_page);
INIT_PER_CPU(fixed_percpu_data);
INIT_PER_CPU(irq_stack_backing_store);
#ifdef CONFIG_SMP
. = ASSERT((fixed_percpu_data == 0),
"fixed_percpu_data is not at start of per-cpu area");
#endif
#endif /* CONFIG_X86_64 */
#ifdef CONFIG_KEXEC_CORE
#include <asm/kexec.h>
. = ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE,
"kexec control code size is too big");
#endif
Reference in New Issue View Git Blame Copy Permalink