forked from Minki/linux
f5a246eab9
This contains pretty many small commits covering fairly large range of files in sound/ directory. Partly because of additional API support and partly because of constantly developed ASoC and ARM stuff. Some highlights: - Introduced the helper function and documentation for exposing the channel map via control API, as discussed in Plumbers; most of PCI drivers are covered, will follow more drivers later - Most of drivers have been replaced with the new PM callbacks (if the bus is supported) - HD-audio controller got the support of runtime PM and the support of D3 clock-stop. Also changing the power_save option in sysfs kicks off immediately to enable / disable the power-save mode. - Another significant code change in HD-audio is the rewrite of firmware loading code. Other than that, most of changes in HD-audio are continued cleanups and standardization for the generic auto parser and bug fixes (HBR, device-specific fixups), in addition to the support of channel-map API. - Addition of ASoC bindings for the compressed API, used by the mid-x86 drivers. - Lots of cleanups and API refreshes for ASoC codec drivers and DaVinci. - Conversion of OMAP to dmaengine. - New machine driver for Wolfson Microelectronics Bells. - New CODEC driver for Wolfson Microelectronics WM0010. - Enhancements to the ux500 and wm2000 drivers - A new driver for DA9055 and the support for regulator bypass mode. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) iQIcBAABAgAGBQJQcpeWAAoJEGwxgFQ9KSmkpi4P/2etDDz5aEkEHNa1l4xEmFcm ymiGTgjaalqpUAVbM/gYx9G59EFMEbzUl1BHAqE5La4wO/v9lNPb+VrdUo+B+NZ7 WSxIPWcNqdinSuoSqyYPjoPMVnhs3EMtNOqmf4jm1JOvdqA+4rO29xQVAqK/5Gfu LpMOyPiRi5ODnbQ1BOIWwpKICioY/mLwGJudK3z0i/fYVA7gLub20f+w+sOjKIA4 wmwQAMTjAR798Cg/tVy4fQmf4SLw+c2nIgGe/PD+2gVlGXLNKBrJfMonHPTbmwKu lmJO/EtnijNOnpbn6up7ryUQ9cSoZAUZOfdIOgmAeQgQ/LWR0f+zf2IQehSPwrul g6hqOnQI2DNN7ugT3cYVbYnsh56TjyhnxhhxZgkapqh706QkqHGyKJNMRetzuXmP 1O//MnZJrFQWd6sOKLlTL2ZzRvnxEJcNVGaE6bbwZTfQMtPeo9l1842uIq1dLUtG VxZb/svKUkMXv4is1dwUYUkpDsKxsgMEmabmuovceGf2N7jj/irkXgqxf6LWkaY1 JQ7ZFWUJyDzEMXRaFfzdGO15T532CfB84wvFX5xoPMwMste2AA7QuybFBVstXhKu AtKNDgRJFUTlnLIxydpPBWdWH3UJdEaFwwsSfuNKI8OmmGKhWC/aP83k4hzueu9H KYLvY/0ObMSMqiwh/ndQ =uNqD -----END PGP SIGNATURE----- Merge tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This contains pretty many small commits covering fairly large range of files in sound/ directory. Partly because of additional API support and partly because of constantly developed ASoC and ARM stuff. Some highlights: - Introduced the helper function and documentation for exposing the channel map via control API, as discussed in Plumbers; most of PCI drivers are covered, will follow more drivers later - Most of drivers have been replaced with the new PM callbacks (if the bus is supported) - HD-audio controller got the support of runtime PM and the support of D3 clock-stop. Also changing the power_save option in sysfs kicks off immediately to enable / disable the power-save mode. - Another significant code change in HD-audio is the rewrite of firmware loading code. Other than that, most of changes in HD-audio are continued cleanups and standardization for the generic auto parser and bug fixes (HBR, device-specific fixups), in addition to the support of channel-map API. - Addition of ASoC bindings for the compressed API, used by the mid-x86 drivers. - Lots of cleanups and API refreshes for ASoC codec drivers and DaVinci. - Conversion of OMAP to dmaengine. - New machine driver for Wolfson Microelectronics Bells. - New CODEC driver for Wolfson Microelectronics WM0010. - Enhancements to the ux500 and wm2000 drivers - A new driver for DA9055 and the support for regulator bypass mode." Fix up various arm soc header file reorg conflicts. * tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (339 commits) ALSA: hda - Add new codec ALC283 ALC290 support ALSA: hda - avoid unneccesary indices on "Headphone Jack" controls ALSA: hda - fix indices on boost volume on Conexant ALSA: aloop - add locking to timer access ALSA: hda - Fix hang caused by race during suspend. sound: Remove unnecessary semicolon ALSA: hda/realtek - Fix detection of ALC271X codec ALSA: hda - Add inverted internal mic quirk for Lenovo IdeaPad U310 ALSA: hda - make Realtek/Sigmatel/Conexant use the generic unsol event ALSA: hda - make a generic unsol event handler ASoC: codecs: Add DA9055 codec driver ASoC: eukrea-tlv320: Convert it to platform driver ALSA: ASoC: add DT bindings for CS4271 ASoC: wm_hubs: Ensure volume updates are handled during class W startup ASoC: wm5110: Adding missing volume update bits ASoC: wm5110: Add OUT3R support ASoC: wm5110: Add AEC loopback support ASoC: wm5110: Rename EPOUT to HPOUT3 ASoC: arizona: Add more clock rates ASoC: arizona: Add more DSP options for mixer input muxes ...
436 lines
11 KiB
C
436 lines
11 KiB
C
/*
|
|
* ASoC driver for Cirrus Logic EP93xx AC97 controller.
|
|
*
|
|
* Copyright (c) 2010 Mika Westerberg
|
|
*
|
|
* Based on s3c-ac97 ASoC driver by Jaswinder Singh.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <sound/core.h>
|
|
#include <sound/ac97_codec.h>
|
|
#include <sound/soc.h>
|
|
|
|
#include <linux/platform_data/dma-ep93xx.h>
|
|
#include "ep93xx-pcm.h"
|
|
|
|
/*
|
|
* Per channel (1-4) registers.
|
|
*/
|
|
#define AC97CH(n) (((n) - 1) * 0x20)
|
|
|
|
#define AC97DR(n) (AC97CH(n) + 0x0000)
|
|
|
|
#define AC97RXCR(n) (AC97CH(n) + 0x0004)
|
|
#define AC97RXCR_REN BIT(0)
|
|
#define AC97RXCR_RX3 BIT(3)
|
|
#define AC97RXCR_RX4 BIT(4)
|
|
#define AC97RXCR_CM BIT(15)
|
|
|
|
#define AC97TXCR(n) (AC97CH(n) + 0x0008)
|
|
#define AC97TXCR_TEN BIT(0)
|
|
#define AC97TXCR_TX3 BIT(3)
|
|
#define AC97TXCR_TX4 BIT(4)
|
|
#define AC97TXCR_CM BIT(15)
|
|
|
|
#define AC97SR(n) (AC97CH(n) + 0x000c)
|
|
#define AC97SR_TXFE BIT(1)
|
|
#define AC97SR_TXUE BIT(6)
|
|
|
|
#define AC97RISR(n) (AC97CH(n) + 0x0010)
|
|
#define AC97ISR(n) (AC97CH(n) + 0x0014)
|
|
#define AC97IE(n) (AC97CH(n) + 0x0018)
|
|
|
|
/*
|
|
* Global AC97 controller registers.
|
|
*/
|
|
#define AC97S1DATA 0x0080
|
|
#define AC97S2DATA 0x0084
|
|
#define AC97S12DATA 0x0088
|
|
|
|
#define AC97RGIS 0x008c
|
|
#define AC97GIS 0x0090
|
|
#define AC97IM 0x0094
|
|
/*
|
|
* Common bits for RGIS, GIS and IM registers.
|
|
*/
|
|
#define AC97_SLOT2RXVALID BIT(1)
|
|
#define AC97_CODECREADY BIT(5)
|
|
#define AC97_SLOT2TXCOMPLETE BIT(6)
|
|
|
|
#define AC97EOI 0x0098
|
|
#define AC97EOI_WINT BIT(0)
|
|
#define AC97EOI_CODECREADY BIT(1)
|
|
|
|
#define AC97GCR 0x009c
|
|
#define AC97GCR_AC97IFE BIT(0)
|
|
|
|
#define AC97RESET 0x00a0
|
|
#define AC97RESET_TIMEDRESET BIT(0)
|
|
|
|
#define AC97SYNC 0x00a4
|
|
#define AC97SYNC_TIMEDSYNC BIT(0)
|
|
|
|
#define AC97_TIMEOUT msecs_to_jiffies(5)
|
|
|
|
/**
|
|
* struct ep93xx_ac97_info - EP93xx AC97 controller info structure
|
|
* @lock: mutex serializing access to the bus (slot 1 & 2 ops)
|
|
* @dev: pointer to the platform device dev structure
|
|
* @regs: mapped AC97 controller registers
|
|
* @done: bus ops wait here for an interrupt
|
|
*/
|
|
struct ep93xx_ac97_info {
|
|
struct mutex lock;
|
|
struct device *dev;
|
|
void __iomem *regs;
|
|
struct completion done;
|
|
};
|
|
|
|
/* currently ALSA only supports a single AC97 device */
|
|
static struct ep93xx_ac97_info *ep93xx_ac97_info;
|
|
|
|
static struct ep93xx_pcm_dma_params ep93xx_ac97_pcm_out = {
|
|
.name = "ac97-pcm-out",
|
|
.dma_port = EP93XX_DMA_AAC1,
|
|
};
|
|
|
|
static struct ep93xx_pcm_dma_params ep93xx_ac97_pcm_in = {
|
|
.name = "ac97-pcm-in",
|
|
.dma_port = EP93XX_DMA_AAC1,
|
|
};
|
|
|
|
static inline unsigned ep93xx_ac97_read_reg(struct ep93xx_ac97_info *info,
|
|
unsigned reg)
|
|
{
|
|
return __raw_readl(info->regs + reg);
|
|
}
|
|
|
|
static inline void ep93xx_ac97_write_reg(struct ep93xx_ac97_info *info,
|
|
unsigned reg, unsigned val)
|
|
{
|
|
__raw_writel(val, info->regs + reg);
|
|
}
|
|
|
|
static unsigned short ep93xx_ac97_read(struct snd_ac97 *ac97,
|
|
unsigned short reg)
|
|
{
|
|
struct ep93xx_ac97_info *info = ep93xx_ac97_info;
|
|
unsigned short val;
|
|
|
|
mutex_lock(&info->lock);
|
|
|
|
ep93xx_ac97_write_reg(info, AC97S1DATA, reg);
|
|
ep93xx_ac97_write_reg(info, AC97IM, AC97_SLOT2RXVALID);
|
|
if (!wait_for_completion_timeout(&info->done, AC97_TIMEOUT)) {
|
|
dev_warn(info->dev, "timeout reading register %x\n", reg);
|
|
mutex_unlock(&info->lock);
|
|
return -ETIMEDOUT;
|
|
}
|
|
val = (unsigned short)ep93xx_ac97_read_reg(info, AC97S2DATA);
|
|
|
|
mutex_unlock(&info->lock);
|
|
return val;
|
|
}
|
|
|
|
static void ep93xx_ac97_write(struct snd_ac97 *ac97,
|
|
unsigned short reg,
|
|
unsigned short val)
|
|
{
|
|
struct ep93xx_ac97_info *info = ep93xx_ac97_info;
|
|
|
|
mutex_lock(&info->lock);
|
|
|
|
/*
|
|
* Writes to the codec need to be done so that slot 2 is filled in
|
|
* before slot 1.
|
|
*/
|
|
ep93xx_ac97_write_reg(info, AC97S2DATA, val);
|
|
ep93xx_ac97_write_reg(info, AC97S1DATA, reg);
|
|
|
|
ep93xx_ac97_write_reg(info, AC97IM, AC97_SLOT2TXCOMPLETE);
|
|
if (!wait_for_completion_timeout(&info->done, AC97_TIMEOUT))
|
|
dev_warn(info->dev, "timeout writing register %x\n", reg);
|
|
|
|
mutex_unlock(&info->lock);
|
|
}
|
|
|
|
static void ep93xx_ac97_warm_reset(struct snd_ac97 *ac97)
|
|
{
|
|
struct ep93xx_ac97_info *info = ep93xx_ac97_info;
|
|
|
|
mutex_lock(&info->lock);
|
|
|
|
/*
|
|
* We are assuming that before this functions gets called, the codec
|
|
* BIT_CLK is stopped by forcing the codec into powerdown mode. We can
|
|
* control the SYNC signal directly via AC97SYNC register. Using
|
|
* TIMEDSYNC the controller will keep the SYNC high > 1us.
|
|
*/
|
|
ep93xx_ac97_write_reg(info, AC97SYNC, AC97SYNC_TIMEDSYNC);
|
|
ep93xx_ac97_write_reg(info, AC97IM, AC97_CODECREADY);
|
|
if (!wait_for_completion_timeout(&info->done, AC97_TIMEOUT))
|
|
dev_warn(info->dev, "codec warm reset timeout\n");
|
|
|
|
mutex_unlock(&info->lock);
|
|
}
|
|
|
|
static void ep93xx_ac97_cold_reset(struct snd_ac97 *ac97)
|
|
{
|
|
struct ep93xx_ac97_info *info = ep93xx_ac97_info;
|
|
|
|
mutex_lock(&info->lock);
|
|
|
|
/*
|
|
* For doing cold reset, we disable the AC97 controller interface, clear
|
|
* WINT and CODECREADY bits, and finally enable the interface again.
|
|
*/
|
|
ep93xx_ac97_write_reg(info, AC97GCR, 0);
|
|
ep93xx_ac97_write_reg(info, AC97EOI, AC97EOI_CODECREADY | AC97EOI_WINT);
|
|
ep93xx_ac97_write_reg(info, AC97GCR, AC97GCR_AC97IFE);
|
|
|
|
/*
|
|
* Now, assert the reset and wait for the codec to become ready.
|
|
*/
|
|
ep93xx_ac97_write_reg(info, AC97RESET, AC97RESET_TIMEDRESET);
|
|
ep93xx_ac97_write_reg(info, AC97IM, AC97_CODECREADY);
|
|
if (!wait_for_completion_timeout(&info->done, AC97_TIMEOUT))
|
|
dev_warn(info->dev, "codec cold reset timeout\n");
|
|
|
|
/*
|
|
* Give the codec some time to come fully out from the reset. This way
|
|
* we ensure that the subsequent reads/writes will work.
|
|
*/
|
|
usleep_range(15000, 20000);
|
|
|
|
mutex_unlock(&info->lock);
|
|
}
|
|
|
|
static irqreturn_t ep93xx_ac97_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct ep93xx_ac97_info *info = dev_id;
|
|
unsigned status, mask;
|
|
|
|
/*
|
|
* Just mask out the interrupt and wake up the waiting thread.
|
|
* Interrupts are cleared via reading/writing to slot 1 & 2 registers by
|
|
* the waiting thread.
|
|
*/
|
|
status = ep93xx_ac97_read_reg(info, AC97GIS);
|
|
mask = ep93xx_ac97_read_reg(info, AC97IM);
|
|
mask &= ~status;
|
|
ep93xx_ac97_write_reg(info, AC97IM, mask);
|
|
|
|
complete(&info->done);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
struct snd_ac97_bus_ops soc_ac97_ops = {
|
|
.read = ep93xx_ac97_read,
|
|
.write = ep93xx_ac97_write,
|
|
.reset = ep93xx_ac97_cold_reset,
|
|
.warm_reset = ep93xx_ac97_warm_reset,
|
|
};
|
|
EXPORT_SYMBOL_GPL(soc_ac97_ops);
|
|
|
|
static int ep93xx_ac97_trigger(struct snd_pcm_substream *substream,
|
|
int cmd, struct snd_soc_dai *dai)
|
|
{
|
|
struct ep93xx_ac97_info *info = snd_soc_dai_get_drvdata(dai);
|
|
unsigned v = 0;
|
|
|
|
switch (cmd) {
|
|
case SNDRV_PCM_TRIGGER_START:
|
|
case SNDRV_PCM_TRIGGER_RESUME:
|
|
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
|
|
/*
|
|
* Enable compact mode, TX slots 3 & 4, and the TX FIFO
|
|
* itself.
|
|
*/
|
|
v |= AC97TXCR_CM;
|
|
v |= AC97TXCR_TX3 | AC97TXCR_TX4;
|
|
v |= AC97TXCR_TEN;
|
|
ep93xx_ac97_write_reg(info, AC97TXCR(1), v);
|
|
} else {
|
|
/*
|
|
* Enable compact mode, RX slots 3 & 4, and the RX FIFO
|
|
* itself.
|
|
*/
|
|
v |= AC97RXCR_CM;
|
|
v |= AC97RXCR_RX3 | AC97RXCR_RX4;
|
|
v |= AC97RXCR_REN;
|
|
ep93xx_ac97_write_reg(info, AC97RXCR(1), v);
|
|
}
|
|
break;
|
|
|
|
case SNDRV_PCM_TRIGGER_STOP:
|
|
case SNDRV_PCM_TRIGGER_SUSPEND:
|
|
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
|
|
/*
|
|
* As per Cirrus EP93xx errata described below:
|
|
*
|
|
* http://www.cirrus.com/en/pubs/errata/ER667E2B.pdf
|
|
*
|
|
* we will wait for the TX FIFO to be empty before
|
|
* clearing the TEN bit.
|
|
*/
|
|
unsigned long timeout = jiffies + AC97_TIMEOUT;
|
|
|
|
do {
|
|
v = ep93xx_ac97_read_reg(info, AC97SR(1));
|
|
if (time_after(jiffies, timeout)) {
|
|
dev_warn(info->dev, "TX timeout\n");
|
|
break;
|
|
}
|
|
} while (!(v & (AC97SR_TXFE | AC97SR_TXUE)));
|
|
|
|
/* disable the TX FIFO */
|
|
ep93xx_ac97_write_reg(info, AC97TXCR(1), 0);
|
|
} else {
|
|
/* disable the RX FIFO */
|
|
ep93xx_ac97_write_reg(info, AC97RXCR(1), 0);
|
|
}
|
|
break;
|
|
|
|
default:
|
|
dev_warn(info->dev, "unknown command %d\n", cmd);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ep93xx_ac97_startup(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct ep93xx_pcm_dma_params *dma_data;
|
|
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
|
|
dma_data = &ep93xx_ac97_pcm_out;
|
|
else
|
|
dma_data = &ep93xx_ac97_pcm_in;
|
|
|
|
snd_soc_dai_set_dma_data(dai, substream, dma_data);
|
|
return 0;
|
|
}
|
|
|
|
static const struct snd_soc_dai_ops ep93xx_ac97_dai_ops = {
|
|
.startup = ep93xx_ac97_startup,
|
|
.trigger = ep93xx_ac97_trigger,
|
|
};
|
|
|
|
static struct snd_soc_dai_driver ep93xx_ac97_dai = {
|
|
.name = "ep93xx-ac97",
|
|
.id = 0,
|
|
.ac97_control = 1,
|
|
.playback = {
|
|
.stream_name = "AC97 Playback",
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
.rates = SNDRV_PCM_RATE_8000_48000,
|
|
.formats = SNDRV_PCM_FMTBIT_S16_LE,
|
|
},
|
|
.capture = {
|
|
.stream_name = "AC97 Capture",
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
.rates = SNDRV_PCM_RATE_8000_48000,
|
|
.formats = SNDRV_PCM_FMTBIT_S16_LE,
|
|
},
|
|
.ops = &ep93xx_ac97_dai_ops,
|
|
};
|
|
|
|
static int __devinit ep93xx_ac97_probe(struct platform_device *pdev)
|
|
{
|
|
struct ep93xx_ac97_info *info;
|
|
struct resource *res;
|
|
unsigned int irq;
|
|
int ret;
|
|
|
|
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
|
|
if (!info)
|
|
return -ENOMEM;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res)
|
|
return -ENODEV;
|
|
|
|
info->regs = devm_request_and_ioremap(&pdev->dev, res);
|
|
if (!info->regs)
|
|
return -ENXIO;
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (!irq)
|
|
return -ENODEV;
|
|
|
|
ret = devm_request_irq(&pdev->dev, irq, ep93xx_ac97_interrupt,
|
|
IRQF_TRIGGER_HIGH, pdev->name, info);
|
|
if (ret)
|
|
goto fail;
|
|
|
|
dev_set_drvdata(&pdev->dev, info);
|
|
|
|
mutex_init(&info->lock);
|
|
init_completion(&info->done);
|
|
info->dev = &pdev->dev;
|
|
|
|
ep93xx_ac97_info = info;
|
|
platform_set_drvdata(pdev, info);
|
|
|
|
ret = snd_soc_register_dai(&pdev->dev, &ep93xx_ac97_dai);
|
|
if (ret)
|
|
goto fail;
|
|
|
|
return 0;
|
|
|
|
fail:
|
|
platform_set_drvdata(pdev, NULL);
|
|
ep93xx_ac97_info = NULL;
|
|
dev_set_drvdata(&pdev->dev, NULL);
|
|
return ret;
|
|
}
|
|
|
|
static int __devexit ep93xx_ac97_remove(struct platform_device *pdev)
|
|
{
|
|
struct ep93xx_ac97_info *info = platform_get_drvdata(pdev);
|
|
|
|
snd_soc_unregister_dai(&pdev->dev);
|
|
|
|
/* disable the AC97 controller */
|
|
ep93xx_ac97_write_reg(info, AC97GCR, 0);
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
ep93xx_ac97_info = NULL;
|
|
dev_set_drvdata(&pdev->dev, NULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver ep93xx_ac97_driver = {
|
|
.probe = ep93xx_ac97_probe,
|
|
.remove = __devexit_p(ep93xx_ac97_remove),
|
|
.driver = {
|
|
.name = "ep93xx-ac97",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(ep93xx_ac97_driver);
|
|
|
|
MODULE_DESCRIPTION("EP93xx AC97 ASoC Driver");
|
|
MODULE_AUTHOR("Mika Westerberg <mika.westerberg@iki.fi>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:ep93xx-ac97");
|