linux/arch/arm/mach-imx/clock-imx27.c
Linus Torvalds 66f03c614c ARM: device tree work
Most of these patches convert code from using static platform data to
 describing the hardware in the device tree. This is only the first
 half of the changes for v3.4 because a lot of patches for this topic
 came in the last week before the merge window.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIVAwUAT24/a2CrR//JCVInAQKYdxAAn+fs7yv+P4OWG/nIhGdnPw8MQ2u9fvqA
 pmNL3Jy0eVowbENDcRRZgfhZ3ZlWBGUYym7J1uiFSrmHyJPoMtMvVg0miPYxLlpE
 vr8bzuSfGOUOa7+Fk6kFVGxS3ZHZTsDvuhMQUIt/2jHgOaesqPvZ1FYFAj1bZ1fm
 2CnQoF3OfnWAngHtoBXtgJxp/1r7+pHlGVbPYpmtHtikl45NmhqWza58aSQBilr+
 S90cVeZs91gyveoxz5N+YrO8+Dx05te3mF+dwWuKC6aDC6d76fjLak54AvYv2Pzr
 I6iaQPV8GIsXi5R4wptmVQAc5mbk5oktxJ7hCIHrmaBiAXygoVAYoqcuumoO3QDb
 QKz10ga1yBYcKYrKvBzKxQrChw53IPU6po+Dd66ALJvLlc3KONksiJs5T/5Wma7P
 v3VPcmZwPrJQbz+fQu6FysHeYQY+wfiR5E9Yz2OXs+PtkSy9OYsFFirdhJeWUPgA
 ASjNLs1y5rxqrJBt7cjyQiBbIf1awGWyzF0yUNrlYHxmhJ6vcxHfrGoW38VRRCTM
 8+JcxOHPRYrPfY7we6zsOn7ZeTWJduoUEeTxDnVS3w3zUIKCvkvkpHaJDvHvYcui
 T/yJnXdUD2O3E5+5k/5cCyde8RbSB9gKsNpIMNkK5BLSmbux3C72dE0sMQFysahI
 hS8aDCDUQUU=
 =fMC+
 -----END PGP SIGNATURE-----

Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull "ARM: device tree work" from Arnd Bergmann:
 "Most of these patches convert code from using static platform data to
  describing the hardware in the device tree.  This is only the first
  half of the changes for v3.4 because a lot of patches for this topic
  came in the last week before the merge window.

  Signed-off-by: Arnd Bergmann <arnd@arndb.de>"

Fix up trivial conflicts in arch/arm/mach-vexpress/{Kconfig,core.h}

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (86 commits)
  Document: devicetree: add OF documents for arch-mmp
  ARM: dts: append DTS file of pxa168
  ARM: mmp: append OF support on pxa168
  ARM: mmp: enable rtc clk in pxa168
  i2c: pxa: add OF support
  serial: pxa: add OF support
  arm/dts: mt_ventoux: very basic support for TeeJet Mt.Ventoux board
  ARM: OMAP2+: Remove extra ifdefs for board-generic
  ARM: OMAP2+: Fix build error when only ARCH_OMAP2/3 or 4 is selected
  ASoC: DT: Add digital microphone binding to PAZ00 board.
  ARM: dt: Add ARM PMU to tegra*.dtsi
  ARM: at91: at91sam9x5cm/dt: add leds support
  ARM: at91: usb_a9g20/dt: add gpio-keys support
  ARM: at91: at91sam9m10g45ek/dt: add gpio-keys support
  ARM: at91: at91sam9m10g45ek/dt: add leds support
  ARM: at91: usb_a9g20/dt: add leds support
  ARM: at91/pio: add new PIO3 features
  ARM: at91: add sam9_smc.o to at91sam9x5 build
  ARM: at91/tc/clocksource: Add 32 bit variant to Timer Counter
  ARM: at91/tc: add device tree support to atmel_tclib
  ...
2012-03-27 16:47:35 -07:00

785 lines
22 KiB
C

/*
* Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2008 Juergen Beisert, kernel@pengutronix.de
* Copyright 2008 Martin Fuzzey, mfuzzey@gmail.com
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/clkdev.h>
#include <linux/of.h>
#include <asm/div64.h>
#include <mach/clock.h>
#include <mach/common.h>
#include <mach/hardware.h>
#define IO_ADDR_CCM(off) (MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR + (off)))
/* Register offsets */
#define CCM_CSCR IO_ADDR_CCM(0x0)
#define CCM_MPCTL0 IO_ADDR_CCM(0x4)
#define CCM_MPCTL1 IO_ADDR_CCM(0x8)
#define CCM_SPCTL0 IO_ADDR_CCM(0xc)
#define CCM_SPCTL1 IO_ADDR_CCM(0x10)
#define CCM_OSC26MCTL IO_ADDR_CCM(0x14)
#define CCM_PCDR0 IO_ADDR_CCM(0x18)
#define CCM_PCDR1 IO_ADDR_CCM(0x1c)
#define CCM_PCCR0 IO_ADDR_CCM(0x20)
#define CCM_PCCR1 IO_ADDR_CCM(0x24)
#define CCM_CCSR IO_ADDR_CCM(0x28)
#define CCM_PMCTL IO_ADDR_CCM(0x2c)
#define CCM_PMCOUNT IO_ADDR_CCM(0x30)
#define CCM_WKGDCTL IO_ADDR_CCM(0x34)
#define CCM_CSCR_UPDATE_DIS (1 << 31)
#define CCM_CSCR_SSI2 (1 << 23)
#define CCM_CSCR_SSI1 (1 << 22)
#define CCM_CSCR_VPU (1 << 21)
#define CCM_CSCR_MSHC (1 << 20)
#define CCM_CSCR_SPLLRES (1 << 19)
#define CCM_CSCR_MPLLRES (1 << 18)
#define CCM_CSCR_SP (1 << 17)
#define CCM_CSCR_MCU (1 << 16)
#define CCM_CSCR_OSC26MDIV (1 << 4)
#define CCM_CSCR_OSC26M (1 << 3)
#define CCM_CSCR_FPM (1 << 2)
#define CCM_CSCR_SPEN (1 << 1)
#define CCM_CSCR_MPEN (1 << 0)
/* i.MX27 TO 2+ */
#define CCM_CSCR_ARM_SRC (1 << 15)
#define CCM_SPCTL1_LF (1 << 15)
#define CCM_SPCTL1_BRMO (1 << 6)
static struct clk mpll_main1_clk, mpll_main2_clk;
static int clk_pccr_enable(struct clk *clk)
{
unsigned long reg;
if (!clk->enable_reg)
return 0;
reg = __raw_readl(clk->enable_reg);
reg |= 1 << clk->enable_shift;
__raw_writel(reg, clk->enable_reg);
return 0;
}
static void clk_pccr_disable(struct clk *clk)
{
unsigned long reg;
if (!clk->enable_reg)
return;
reg = __raw_readl(clk->enable_reg);
reg &= ~(1 << clk->enable_shift);
__raw_writel(reg, clk->enable_reg);
}
static int clk_spll_enable(struct clk *clk)
{
unsigned long reg;
reg = __raw_readl(CCM_CSCR);
reg |= CCM_CSCR_SPEN;
__raw_writel(reg, CCM_CSCR);
while (!(__raw_readl(CCM_SPCTL1) & CCM_SPCTL1_LF));
return 0;
}
static void clk_spll_disable(struct clk *clk)
{
unsigned long reg;
reg = __raw_readl(CCM_CSCR);
reg &= ~CCM_CSCR_SPEN;
__raw_writel(reg, CCM_CSCR);
}
static int clk_cpu_set_parent(struct clk *clk, struct clk *parent)
{
int cscr = __raw_readl(CCM_CSCR);
if (clk->parent == parent)
return 0;
if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
if (parent == &mpll_main1_clk) {
cscr |= CCM_CSCR_ARM_SRC;
} else {
if (parent == &mpll_main2_clk)
cscr &= ~CCM_CSCR_ARM_SRC;
else
return -EINVAL;
}
__raw_writel(cscr, CCM_CSCR);
clk->parent = parent;
return 0;
}
return -ENODEV;
}
static unsigned long round_rate_cpu(struct clk *clk, unsigned long rate)
{
int div;
unsigned long parent_rate;
parent_rate = clk_get_rate(clk->parent);
div = parent_rate / rate;
if (parent_rate % rate)
div++;
if (div > 4)
div = 4;
return parent_rate / div;
}
static int set_rate_cpu(struct clk *clk, unsigned long rate)
{
unsigned int div;
uint32_t reg;
unsigned long parent_rate;
parent_rate = clk_get_rate(clk->parent);
div = parent_rate / rate;
if (div > 4 || div < 1 || ((parent_rate / div) != rate))
return -EINVAL;
div--;
reg = __raw_readl(CCM_CSCR);
if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
reg &= ~(3 << 12);
reg |= div << 12;
reg &= ~(CCM_CSCR_FPM | CCM_CSCR_SPEN);
__raw_writel(reg | CCM_CSCR_UPDATE_DIS, CCM_CSCR);
} else {
printk(KERN_ERR "Can't set CPU frequency!\n");
}
return 0;
}
static unsigned long round_rate_per(struct clk *clk, unsigned long rate)
{
u32 div;
unsigned long parent_rate;
parent_rate = clk_get_rate(clk->parent);
div = parent_rate / rate;
if (parent_rate % rate)
div++;
if (div > 64)
div = 64;
return parent_rate / div;
}
static int set_rate_per(struct clk *clk, unsigned long rate)
{
u32 reg;
u32 div;
unsigned long parent_rate;
parent_rate = clk_get_rate(clk->parent);
if (clk->id < 0 || clk->id > 3)
return -EINVAL;
div = parent_rate / rate;
if (div > 64 || div < 1 || ((parent_rate / div) != rate))
return -EINVAL;
div--;
reg = __raw_readl(CCM_PCDR1) & ~(0x3f << (clk->id << 3));
reg |= div << (clk->id << 3);
__raw_writel(reg, CCM_PCDR1);
return 0;
}
static unsigned long get_rate_usb(struct clk *clk)
{
unsigned long usb_pdf;
unsigned long parent_rate;
parent_rate = clk_get_rate(clk->parent);
usb_pdf = (__raw_readl(CCM_CSCR) >> 28) & 0x7;
return parent_rate / (usb_pdf + 1U);
}
static unsigned long get_rate_ssix(struct clk *clk, unsigned long pdf)
{
unsigned long parent_rate;
parent_rate = clk_get_rate(clk->parent);
if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
pdf += 4; /* MX27 TO2+ */
else
pdf = (pdf < 2) ? 124UL : pdf; /* MX21 & MX27 TO1 */
return 2UL * parent_rate / pdf;
}
static unsigned long get_rate_ssi1(struct clk *clk)
{
return get_rate_ssix(clk, (__raw_readl(CCM_PCDR0) >> 16) & 0x3f);
}
static unsigned long get_rate_ssi2(struct clk *clk)
{
return get_rate_ssix(clk, (__raw_readl(CCM_PCDR0) >> 26) & 0x3f);
}
static unsigned long get_rate_nfc(struct clk *clk)
{
unsigned long nfc_pdf;
unsigned long parent_rate;
parent_rate = clk_get_rate(clk->parent);
if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
nfc_pdf = (__raw_readl(CCM_PCDR0) >> 6) & 0xf;
else
nfc_pdf = (__raw_readl(CCM_PCDR0) >> 12) & 0xf;
return parent_rate / (nfc_pdf + 1);
}
static unsigned long get_rate_vpu(struct clk *clk)
{
unsigned long vpu_pdf;
unsigned long parent_rate;
parent_rate = clk_get_rate(clk->parent);
if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
vpu_pdf = (__raw_readl(CCM_PCDR0) >> 10) & 0x3f;
vpu_pdf += 4;
} else {
vpu_pdf = (__raw_readl(CCM_PCDR0) >> 8) & 0xf;
vpu_pdf = (vpu_pdf < 2) ? 124 : vpu_pdf;
}
return 2UL * parent_rate / vpu_pdf;
}
static unsigned long round_rate_parent(struct clk *clk, unsigned long rate)
{
return clk->parent->round_rate(clk->parent, rate);
}
static unsigned long get_rate_parent(struct clk *clk)
{
return clk_get_rate(clk->parent);
}
static int set_rate_parent(struct clk *clk, unsigned long rate)
{
return clk->parent->set_rate(clk->parent, rate);
}
/* in Hz */
static unsigned long external_high_reference = 26000000;
static unsigned long get_rate_high_reference(struct clk *clk)
{
return external_high_reference;
}
/* in Hz */
static unsigned long external_low_reference = 32768;
static unsigned long get_rate_low_reference(struct clk *clk)
{
return external_low_reference;
}
static unsigned long get_rate_fpm(struct clk *clk)
{
return clk_get_rate(clk->parent) * 1024;
}
static unsigned long get_rate_mpll(struct clk *clk)
{
return mxc_decode_pll(__raw_readl(CCM_MPCTL0),
clk_get_rate(clk->parent));
}
static unsigned long get_rate_mpll_main(struct clk *clk)
{
unsigned long parent_rate;
parent_rate = clk_get_rate(clk->parent);
/* i.MX27 TO2:
* clk->id == 0: arm clock source path 1 which is from 2 * MPLL / 2
* clk->id == 1: arm clock source path 2 which is from 2 * MPLL / 3
*/
if (mx27_revision() >= IMX_CHIP_REVISION_2_0 && clk->id == 1)
return 2UL * parent_rate / 3UL;
return parent_rate;
}
static unsigned long get_rate_spll(struct clk *clk)
{
uint32_t reg;
unsigned long rate;
rate = clk_get_rate(clk->parent);
reg = __raw_readl(CCM_SPCTL0);
/* On TO2 we have to write the value back. Otherwise we
* read 0 from this register the next time.
*/
if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
__raw_writel(reg, CCM_SPCTL0);
return mxc_decode_pll(reg, rate);
}
static unsigned long get_rate_cpu(struct clk *clk)
{
u32 div;
unsigned long rate;
if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
div = (__raw_readl(CCM_CSCR) >> 12) & 0x3;
else
div = (__raw_readl(CCM_CSCR) >> 13) & 0x7;
rate = clk_get_rate(clk->parent);
return rate / (div + 1);
}
static unsigned long get_rate_ahb(struct clk *clk)
{
unsigned long rate, bclk_pdf;
if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
bclk_pdf = (__raw_readl(CCM_CSCR) >> 8) & 0x3;
else
bclk_pdf = (__raw_readl(CCM_CSCR) >> 9) & 0xf;
rate = clk_get_rate(clk->parent);
return rate / (bclk_pdf + 1);
}
static unsigned long get_rate_ipg(struct clk *clk)
{
unsigned long rate, ipg_pdf;
if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
return clk_get_rate(clk->parent);
else
ipg_pdf = (__raw_readl(CCM_CSCR) >> 8) & 1;
rate = clk_get_rate(clk->parent);
return rate / (ipg_pdf + 1);
}
static unsigned long get_rate_per(struct clk *clk)
{
unsigned long perclk_pdf, parent_rate;
parent_rate = clk_get_rate(clk->parent);
if (clk->id < 0 || clk->id > 3)
return 0;
perclk_pdf = (__raw_readl(CCM_PCDR1) >> (clk->id << 3)) & 0x3f;
return parent_rate / (perclk_pdf + 1);
}
/*
* the high frequency external clock reference
* Default case is 26MHz. Could be changed at runtime
* with a call to change_external_high_reference()
*/
static struct clk ckih_clk = {
.get_rate = get_rate_high_reference,
};
static struct clk mpll_clk = {
.parent = &ckih_clk,
.get_rate = get_rate_mpll,
};
/* For i.MX27 TO2, it is the MPLL path 1 of ARM core
* It provides the clock source whose rate is same as MPLL
*/
static struct clk mpll_main1_clk = {
.id = 0,
.parent = &mpll_clk,
.get_rate = get_rate_mpll_main,
};
/* For i.MX27 TO2, it is the MPLL path 2 of ARM core
* It provides the clock source whose rate is same MPLL * 2 / 3
*/
static struct clk mpll_main2_clk = {
.id = 1,
.parent = &mpll_clk,
.get_rate = get_rate_mpll_main,
};
static struct clk ahb_clk = {
.parent = &mpll_main2_clk,
.get_rate = get_rate_ahb,
};
static struct clk ipg_clk = {
.parent = &ahb_clk,
.get_rate = get_rate_ipg,
};
static struct clk cpu_clk = {
.parent = &mpll_main2_clk,
.set_parent = clk_cpu_set_parent,
.round_rate = round_rate_cpu,
.get_rate = get_rate_cpu,
.set_rate = set_rate_cpu,
};
static struct clk spll_clk = {
.parent = &ckih_clk,
.get_rate = get_rate_spll,
.enable = clk_spll_enable,
.disable = clk_spll_disable,
};
/*
* the low frequency external clock reference
* Default case is 32.768kHz.
*/
static struct clk ckil_clk = {
.get_rate = get_rate_low_reference,
};
/* Output of frequency pre multiplier */
static struct clk fpm_clk = {
.parent = &ckil_clk,
.get_rate = get_rate_fpm,
};
#define PCCR0 CCM_PCCR0
#define PCCR1 CCM_PCCR1
#define DEFINE_CLOCK(name, i, er, es, gr, s, p) \
static struct clk name = { \
.id = i, \
.enable_reg = er, \
.enable_shift = es, \
.get_rate = gr, \
.enable = clk_pccr_enable, \
.disable = clk_pccr_disable, \
.secondary = s, \
.parent = p, \
}
#define DEFINE_CLOCK1(name, i, er, es, getsetround, s, p) \
static struct clk name = { \
.id = i, \
.enable_reg = er, \
.enable_shift = es, \
.get_rate = get_rate_##getsetround, \
.set_rate = set_rate_##getsetround, \
.round_rate = round_rate_##getsetround, \
.enable = clk_pccr_enable, \
.disable = clk_pccr_disable, \
.secondary = s, \
.parent = p, \
}
/* Forward declaration to keep the following list in order */
static struct clk slcdc_clk1, sahara2_clk1, rtic_clk1, fec_clk1, emma_clk1,
dma_clk1, lcdc_clk2, vpu_clk1;
/* All clocks we can gate through PCCRx in the order of PCCRx bits */
DEFINE_CLOCK(ssi2_clk1, 1, PCCR0, 0, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(ssi1_clk1, 0, PCCR0, 1, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(slcdc_clk, 0, PCCR0, 2, NULL, &slcdc_clk1, &ahb_clk);
DEFINE_CLOCK(sdhc3_clk1, 0, PCCR0, 3, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(sdhc2_clk1, 0, PCCR0, 4, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(sdhc1_clk1, 0, PCCR0, 5, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(scc_clk, 0, PCCR0, 6, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(sahara2_clk, 0, PCCR0, 7, NULL, &sahara2_clk1, &ahb_clk);
DEFINE_CLOCK(rtic_clk, 0, PCCR0, 8, NULL, &rtic_clk1, &ahb_clk);
DEFINE_CLOCK(rtc_clk, 0, PCCR0, 9, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(pwm_clk1, 0, PCCR0, 11, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(owire_clk, 0, PCCR0, 12, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(mstick_clk1, 0, PCCR0, 13, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(lcdc_clk1, 0, PCCR0, 14, NULL, &lcdc_clk2, &ipg_clk);
DEFINE_CLOCK(kpp_clk, 0, PCCR0, 15, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(iim_clk, 0, PCCR0, 16, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(i2c2_clk, 1, PCCR0, 17, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(i2c1_clk, 0, PCCR0, 18, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(gpt6_clk1, 0, PCCR0, 29, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(gpt5_clk1, 0, PCCR0, 20, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(gpt4_clk1, 0, PCCR0, 21, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(gpt3_clk1, 0, PCCR0, 22, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(gpt2_clk1, 0, PCCR0, 23, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(gpt1_clk1, 0, PCCR0, 24, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(gpio_clk, 0, PCCR0, 25, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(fec_clk, 0, PCCR0, 26, NULL, &fec_clk1, &ahb_clk);
DEFINE_CLOCK(emma_clk, 0, PCCR0, 27, NULL, &emma_clk1, &ahb_clk);
DEFINE_CLOCK(dma_clk, 0, PCCR0, 28, NULL, &dma_clk1, &ahb_clk);
DEFINE_CLOCK(cspi13_clk1, 0, PCCR0, 29, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(cspi2_clk1, 0, PCCR0, 30, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(cspi1_clk1, 0, PCCR0, 31, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(mstick_clk, 0, PCCR1, 2, NULL, &mstick_clk1, &ipg_clk);
DEFINE_CLOCK(nfc_clk, 0, PCCR1, 3, get_rate_nfc, NULL, &cpu_clk);
DEFINE_CLOCK(ssi2_clk, 1, PCCR1, 4, get_rate_ssi2, &ssi2_clk1, &mpll_main2_clk);
DEFINE_CLOCK(ssi1_clk, 0, PCCR1, 5, get_rate_ssi1, &ssi1_clk1, &mpll_main2_clk);
DEFINE_CLOCK(vpu_clk, 0, PCCR1, 6, get_rate_vpu, &vpu_clk1, &mpll_main2_clk);
DEFINE_CLOCK1(per4_clk, 3, PCCR1, 7, per, NULL, &mpll_main2_clk);
DEFINE_CLOCK1(per3_clk, 2, PCCR1, 8, per, NULL, &mpll_main2_clk);
DEFINE_CLOCK1(per2_clk, 1, PCCR1, 9, per, NULL, &mpll_main2_clk);
DEFINE_CLOCK1(per1_clk, 0, PCCR1, 10, per, NULL, &mpll_main2_clk);
DEFINE_CLOCK(usb_clk1, 0, PCCR1, 11, NULL, NULL, &ahb_clk);
DEFINE_CLOCK(slcdc_clk1, 0, PCCR1, 12, NULL, NULL, &ahb_clk);
DEFINE_CLOCK(sahara2_clk1, 0, PCCR1, 13, NULL, NULL, &ahb_clk);
DEFINE_CLOCK(rtic_clk1, 0, PCCR1, 14, NULL, NULL, &ahb_clk);
DEFINE_CLOCK(lcdc_clk2, 0, PCCR1, 15, NULL, NULL, &ahb_clk);
DEFINE_CLOCK(vpu_clk1, 0, PCCR1, 16, NULL, NULL, &ahb_clk);
DEFINE_CLOCK(fec_clk1, 0, PCCR1, 17, NULL, NULL, &ahb_clk);
DEFINE_CLOCK(emma_clk1, 0, PCCR1, 18, NULL, NULL, &ahb_clk);
DEFINE_CLOCK(emi_clk, 0, PCCR1, 19, NULL, NULL, &ahb_clk);
DEFINE_CLOCK(dma_clk1, 0, PCCR1, 20, NULL, NULL, &ahb_clk);
DEFINE_CLOCK(csi_clk1, 0, PCCR1, 21, NULL, NULL, &ahb_clk);
DEFINE_CLOCK(brom_clk, 0, PCCR1, 22, NULL, NULL, &ahb_clk);
DEFINE_CLOCK(pata_clk, 0, PCCR1, 23, NULL, NULL, &ahb_clk);
DEFINE_CLOCK(wdog_clk, 0, PCCR1, 24, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(usb_clk, 0, PCCR1, 25, get_rate_usb, &usb_clk1, &spll_clk);
DEFINE_CLOCK(uart6_clk1, 0, PCCR1, 26, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(uart5_clk1, 0, PCCR1, 27, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(uart4_clk1, 0, PCCR1, 28, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(uart3_clk1, 0, PCCR1, 29, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(uart2_clk1, 0, PCCR1, 30, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(uart1_clk1, 0, PCCR1, 31, NULL, NULL, &ipg_clk);
/* Clocks we cannot directly gate, but drivers need their rates */
DEFINE_CLOCK(cspi1_clk, 0, NULL, 0, NULL, &cspi1_clk1, &per2_clk);
DEFINE_CLOCK(cspi2_clk, 1, NULL, 0, NULL, &cspi2_clk1, &per2_clk);
DEFINE_CLOCK(cspi3_clk, 2, NULL, 0, NULL, &cspi13_clk1, &per2_clk);
DEFINE_CLOCK(sdhc1_clk, 0, NULL, 0, NULL, &sdhc1_clk1, &per2_clk);
DEFINE_CLOCK(sdhc2_clk, 1, NULL, 0, NULL, &sdhc2_clk1, &per2_clk);
DEFINE_CLOCK(sdhc3_clk, 2, NULL, 0, NULL, &sdhc3_clk1, &per2_clk);
DEFINE_CLOCK(pwm_clk, 0, NULL, 0, NULL, &pwm_clk1, &per1_clk);
DEFINE_CLOCK(gpt1_clk, 0, NULL, 0, NULL, &gpt1_clk1, &per1_clk);
DEFINE_CLOCK(gpt2_clk, 1, NULL, 0, NULL, &gpt2_clk1, &per1_clk);
DEFINE_CLOCK(gpt3_clk, 2, NULL, 0, NULL, &gpt3_clk1, &per1_clk);
DEFINE_CLOCK(gpt4_clk, 3, NULL, 0, NULL, &gpt4_clk1, &per1_clk);
DEFINE_CLOCK(gpt5_clk, 4, NULL, 0, NULL, &gpt5_clk1, &per1_clk);
DEFINE_CLOCK(gpt6_clk, 5, NULL, 0, NULL, &gpt6_clk1, &per1_clk);
DEFINE_CLOCK(uart1_clk, 0, NULL, 0, NULL, &uart1_clk1, &per1_clk);
DEFINE_CLOCK(uart2_clk, 1, NULL, 0, NULL, &uart2_clk1, &per1_clk);
DEFINE_CLOCK(uart3_clk, 2, NULL, 0, NULL, &uart3_clk1, &per1_clk);
DEFINE_CLOCK(uart4_clk, 3, NULL, 0, NULL, &uart4_clk1, &per1_clk);
DEFINE_CLOCK(uart5_clk, 4, NULL, 0, NULL, &uart5_clk1, &per1_clk);
DEFINE_CLOCK(uart6_clk, 5, NULL, 0, NULL, &uart6_clk1, &per1_clk);
DEFINE_CLOCK1(lcdc_clk, 0, NULL, 0, parent, &lcdc_clk1, &per3_clk);
DEFINE_CLOCK1(csi_clk, 0, NULL, 0, parent, &csi_clk1, &per4_clk);
#define _REGISTER_CLOCK(d, n, c) \
{ \
.dev_id = d, \
.con_id = n, \
.clk = &c, \
},
static struct clk_lookup lookups[] = {
/* i.mx27 has the i.mx21 type uart */
_REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk)
_REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk)
_REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk)
_REGISTER_CLOCK("imx21-uart.3", NULL, uart4_clk)
_REGISTER_CLOCK("imx21-uart.4", NULL, uart5_clk)
_REGISTER_CLOCK("imx21-uart.5", NULL, uart6_clk)
_REGISTER_CLOCK(NULL, "gpt1", gpt1_clk)
_REGISTER_CLOCK(NULL, "gpt2", gpt2_clk)
_REGISTER_CLOCK(NULL, "gpt3", gpt3_clk)
_REGISTER_CLOCK(NULL, "gpt4", gpt4_clk)
_REGISTER_CLOCK(NULL, "gpt5", gpt5_clk)
_REGISTER_CLOCK(NULL, "gpt6", gpt6_clk)
_REGISTER_CLOCK("mxc_pwm.0", NULL, pwm_clk)
_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
_REGISTER_CLOCK("mxc-mmc.2", NULL, sdhc3_clk)
_REGISTER_CLOCK("imx27-cspi.0", NULL, cspi1_clk)
_REGISTER_CLOCK("imx27-cspi.1", NULL, cspi2_clk)
_REGISTER_CLOCK("imx27-cspi.2", NULL, cspi3_clk)
_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
_REGISTER_CLOCK("mx2-camera.0", NULL, csi_clk)
_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk)
_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk1)
_REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk)
_REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk1)
_REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk)
_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk1)
_REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk)
_REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk1)
_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
_REGISTER_CLOCK(NULL, "vpu", vpu_clk)
_REGISTER_CLOCK(NULL, "dma", dma_clk)
_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
_REGISTER_CLOCK(NULL, "brom", brom_clk)
_REGISTER_CLOCK("m2m-emmaprp.0", NULL, emma_clk)
_REGISTER_CLOCK(NULL, "slcdc", slcdc_clk)
_REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk)
_REGISTER_CLOCK(NULL, "emi", emi_clk)
_REGISTER_CLOCK(NULL, "sahara2", sahara2_clk)
_REGISTER_CLOCK("pata_imx", NULL, pata_clk)
_REGISTER_CLOCK(NULL, "mstick", mstick_clk)
_REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk)
_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
_REGISTER_CLOCK(NULL, "iim", iim_clk)
_REGISTER_CLOCK(NULL, "kpp", kpp_clk)
_REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk)
_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
_REGISTER_CLOCK(NULL, "scc", scc_clk)
};
/* Adjust the clock path for TO2 and later */
static void __init to2_adjust_clocks(void)
{
unsigned long cscr = __raw_readl(CCM_CSCR);
if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
if (cscr & CCM_CSCR_ARM_SRC)
cpu_clk.parent = &mpll_main1_clk;
if (!(cscr & CCM_CSCR_SSI2))
ssi1_clk.parent = &spll_clk;
if (!(cscr & CCM_CSCR_SSI1))
ssi1_clk.parent = &spll_clk;
if (!(cscr & CCM_CSCR_VPU))
vpu_clk.parent = &spll_clk;
} else {
cpu_clk.parent = &mpll_clk;
cpu_clk.set_parent = NULL;
cpu_clk.round_rate = NULL;
cpu_clk.set_rate = NULL;
ahb_clk.parent = &mpll_clk;
per1_clk.parent = &mpll_clk;
per2_clk.parent = &mpll_clk;
per3_clk.parent = &mpll_clk;
per4_clk.parent = &mpll_clk;
ssi1_clk.parent = &mpll_clk;
ssi2_clk.parent = &mpll_clk;
vpu_clk.parent = &mpll_clk;
}
}
/*
* must be called very early to get information about the
* available clock rate when the timer framework starts
*/
int __init mx27_clocks_init(unsigned long fref)
{
u32 cscr = __raw_readl(CCM_CSCR);
external_high_reference = fref;
/* detect clock reference for both system PLLs */
if (cscr & CCM_CSCR_MCU)
mpll_clk.parent = &ckih_clk;
else
mpll_clk.parent = &fpm_clk;
if (cscr & CCM_CSCR_SP)
spll_clk.parent = &ckih_clk;
else
spll_clk.parent = &fpm_clk;
to2_adjust_clocks();
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
/* Turn off all clocks we do not need */
__raw_writel(0, CCM_PCCR0);
__raw_writel((1 << 10) | (1 << 19), CCM_PCCR1);
spll_clk.disable(&spll_clk);
/* enable basic clocks */
clk_enable(&per1_clk);
clk_enable(&gpio_clk);
clk_enable(&emi_clk);
clk_enable(&iim_clk);
imx_print_silicon_rev("i.MX27", mx27_revision());
clk_disable(&iim_clk);
#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
clk_enable(&uart1_clk);
#endif
mxc_timer_init(&gpt1_clk, MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR),
MX27_INT_GPT1);
return 0;
}
#ifdef CONFIG_OF
int __init mx27_clocks_init_dt(void)
{
struct device_node *np;
u32 fref = 26000000; /* default */
for_each_compatible_node(np, NULL, "fixed-clock") {
if (!of_device_is_compatible(np, "fsl,imx-osc26m"))
continue;
if (!of_property_read_u32(np, "clock-frequency", &fref))
break;
}
return mx27_clocks_init(fref);
}
#endif