forked from Minki/linux
c95cf3d09a
wl1251 supports also that NVS is stored in a separate EEPROM, add support for that. kvalo: use platform data instead Kconfig and use kernel style Signed-off-by: David-John Willis <John.Willis@Distant-earth.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
347 lines
7.1 KiB
C
347 lines
7.1 KiB
C
/*
|
|
* This file is part of wl1251
|
|
*
|
|
* Copyright (C) 2008 Nokia Corporation
|
|
*
|
|
* Contact: Kalle Valo <kalle.valo@nokia.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
|
|
* 02110-1301 USA
|
|
*
|
|
*/
|
|
|
|
#include <linux/irq.h>
|
|
#include <linux/module.h>
|
|
#include <linux/crc7.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/wl12xx.h>
|
|
|
|
#include "wl1251.h"
|
|
#include "wl1251_reg.h"
|
|
#include "wl1251_spi.h"
|
|
|
|
static irqreturn_t wl1251_irq(int irq, void *cookie)
|
|
{
|
|
struct wl1251 *wl;
|
|
|
|
wl1251_debug(DEBUG_IRQ, "IRQ");
|
|
|
|
wl = cookie;
|
|
|
|
ieee80211_queue_work(wl->hw, &wl->irq_work);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static struct spi_device *wl_to_spi(struct wl1251 *wl)
|
|
{
|
|
return wl->if_priv;
|
|
}
|
|
|
|
static void wl1251_spi_reset(struct wl1251 *wl)
|
|
{
|
|
u8 *cmd;
|
|
struct spi_transfer t;
|
|
struct spi_message m;
|
|
|
|
cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
|
|
if (!cmd) {
|
|
wl1251_error("could not allocate cmd for spi reset");
|
|
return;
|
|
}
|
|
|
|
memset(&t, 0, sizeof(t));
|
|
spi_message_init(&m);
|
|
|
|
memset(cmd, 0xff, WSPI_INIT_CMD_LEN);
|
|
|
|
t.tx_buf = cmd;
|
|
t.len = WSPI_INIT_CMD_LEN;
|
|
spi_message_add_tail(&t, &m);
|
|
|
|
spi_sync(wl_to_spi(wl), &m);
|
|
|
|
wl1251_dump(DEBUG_SPI, "spi reset -> ", cmd, WSPI_INIT_CMD_LEN);
|
|
}
|
|
|
|
static void wl1251_spi_wake(struct wl1251 *wl)
|
|
{
|
|
u8 crc[WSPI_INIT_CMD_CRC_LEN], *cmd;
|
|
struct spi_transfer t;
|
|
struct spi_message m;
|
|
|
|
cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
|
|
if (!cmd) {
|
|
wl1251_error("could not allocate cmd for spi init");
|
|
return;
|
|
}
|
|
|
|
memset(crc, 0, sizeof(crc));
|
|
memset(&t, 0, sizeof(t));
|
|
spi_message_init(&m);
|
|
|
|
/*
|
|
* Set WSPI_INIT_COMMAND
|
|
* the data is being send from the MSB to LSB
|
|
*/
|
|
cmd[2] = 0xff;
|
|
cmd[3] = 0xff;
|
|
cmd[1] = WSPI_INIT_CMD_START | WSPI_INIT_CMD_TX;
|
|
cmd[0] = 0;
|
|
cmd[7] = 0;
|
|
cmd[6] |= HW_ACCESS_WSPI_INIT_CMD_MASK << 3;
|
|
cmd[6] |= HW_ACCESS_WSPI_FIXED_BUSY_LEN & WSPI_INIT_CMD_FIXEDBUSY_LEN;
|
|
|
|
if (HW_ACCESS_WSPI_FIXED_BUSY_LEN == 0)
|
|
cmd[5] |= WSPI_INIT_CMD_DIS_FIXEDBUSY;
|
|
else
|
|
cmd[5] |= WSPI_INIT_CMD_EN_FIXEDBUSY;
|
|
|
|
cmd[5] |= WSPI_INIT_CMD_IOD | WSPI_INIT_CMD_IP | WSPI_INIT_CMD_CS
|
|
| WSPI_INIT_CMD_WSPI | WSPI_INIT_CMD_WS;
|
|
|
|
crc[0] = cmd[1];
|
|
crc[1] = cmd[0];
|
|
crc[2] = cmd[7];
|
|
crc[3] = cmd[6];
|
|
crc[4] = cmd[5];
|
|
|
|
cmd[4] |= crc7(0, crc, WSPI_INIT_CMD_CRC_LEN) << 1;
|
|
cmd[4] |= WSPI_INIT_CMD_END;
|
|
|
|
t.tx_buf = cmd;
|
|
t.len = WSPI_INIT_CMD_LEN;
|
|
spi_message_add_tail(&t, &m);
|
|
|
|
spi_sync(wl_to_spi(wl), &m);
|
|
|
|
wl1251_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN);
|
|
}
|
|
|
|
static void wl1251_spi_reset_wake(struct wl1251 *wl)
|
|
{
|
|
wl1251_spi_reset(wl);
|
|
wl1251_spi_wake(wl);
|
|
}
|
|
|
|
static void wl1251_spi_read(struct wl1251 *wl, int addr, void *buf,
|
|
size_t len)
|
|
{
|
|
struct spi_transfer t[3];
|
|
struct spi_message m;
|
|
u8 *busy_buf;
|
|
u32 *cmd;
|
|
|
|
cmd = &wl->buffer_cmd;
|
|
busy_buf = wl->buffer_busyword;
|
|
|
|
*cmd = 0;
|
|
*cmd |= WSPI_CMD_READ;
|
|
*cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
|
|
*cmd |= addr & WSPI_CMD_BYTE_ADDR;
|
|
|
|
spi_message_init(&m);
|
|
memset(t, 0, sizeof(t));
|
|
|
|
t[0].tx_buf = cmd;
|
|
t[0].len = 4;
|
|
spi_message_add_tail(&t[0], &m);
|
|
|
|
/* Busy and non busy words read */
|
|
t[1].rx_buf = busy_buf;
|
|
t[1].len = WL1251_BUSY_WORD_LEN;
|
|
spi_message_add_tail(&t[1], &m);
|
|
|
|
t[2].rx_buf = buf;
|
|
t[2].len = len;
|
|
spi_message_add_tail(&t[2], &m);
|
|
|
|
spi_sync(wl_to_spi(wl), &m);
|
|
|
|
/* FIXME: check busy words */
|
|
|
|
wl1251_dump(DEBUG_SPI, "spi_read cmd -> ", cmd, sizeof(*cmd));
|
|
wl1251_dump(DEBUG_SPI, "spi_read buf <- ", buf, len);
|
|
}
|
|
|
|
static void wl1251_spi_write(struct wl1251 *wl, int addr, void *buf,
|
|
size_t len)
|
|
{
|
|
struct spi_transfer t[2];
|
|
struct spi_message m;
|
|
u32 *cmd;
|
|
|
|
cmd = &wl->buffer_cmd;
|
|
|
|
*cmd = 0;
|
|
*cmd |= WSPI_CMD_WRITE;
|
|
*cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
|
|
*cmd |= addr & WSPI_CMD_BYTE_ADDR;
|
|
|
|
spi_message_init(&m);
|
|
memset(t, 0, sizeof(t));
|
|
|
|
t[0].tx_buf = cmd;
|
|
t[0].len = sizeof(*cmd);
|
|
spi_message_add_tail(&t[0], &m);
|
|
|
|
t[1].tx_buf = buf;
|
|
t[1].len = len;
|
|
spi_message_add_tail(&t[1], &m);
|
|
|
|
spi_sync(wl_to_spi(wl), &m);
|
|
|
|
wl1251_dump(DEBUG_SPI, "spi_write cmd -> ", cmd, sizeof(*cmd));
|
|
wl1251_dump(DEBUG_SPI, "spi_write buf -> ", buf, len);
|
|
}
|
|
|
|
static void wl1251_spi_enable_irq(struct wl1251 *wl)
|
|
{
|
|
return enable_irq(wl->irq);
|
|
}
|
|
|
|
static void wl1251_spi_disable_irq(struct wl1251 *wl)
|
|
{
|
|
return disable_irq(wl->irq);
|
|
}
|
|
|
|
static const struct wl1251_if_operations wl1251_spi_ops = {
|
|
.read = wl1251_spi_read,
|
|
.write = wl1251_spi_write,
|
|
.reset = wl1251_spi_reset_wake,
|
|
.enable_irq = wl1251_spi_enable_irq,
|
|
.disable_irq = wl1251_spi_disable_irq,
|
|
};
|
|
|
|
static int __devinit wl1251_spi_probe(struct spi_device *spi)
|
|
{
|
|
struct wl12xx_platform_data *pdata;
|
|
struct ieee80211_hw *hw;
|
|
struct wl1251 *wl;
|
|
int ret;
|
|
|
|
pdata = spi->dev.platform_data;
|
|
if (!pdata) {
|
|
wl1251_error("no platform data");
|
|
return -ENODEV;
|
|
}
|
|
|
|
hw = wl1251_alloc_hw();
|
|
if (IS_ERR(hw))
|
|
return PTR_ERR(hw);
|
|
|
|
wl = hw->priv;
|
|
|
|
SET_IEEE80211_DEV(hw, &spi->dev);
|
|
dev_set_drvdata(&spi->dev, wl);
|
|
wl->if_priv = spi;
|
|
wl->if_ops = &wl1251_spi_ops;
|
|
|
|
/* This is the only SPI value that we need to set here, the rest
|
|
* comes from the board-peripherals file */
|
|
spi->bits_per_word = 32;
|
|
|
|
ret = spi_setup(spi);
|
|
if (ret < 0) {
|
|
wl1251_error("spi_setup failed");
|
|
goto out_free;
|
|
}
|
|
|
|
wl->set_power = pdata->set_power;
|
|
if (!wl->set_power) {
|
|
wl1251_error("set power function missing in platform data");
|
|
return -ENODEV;
|
|
}
|
|
|
|
wl->irq = spi->irq;
|
|
if (wl->irq < 0) {
|
|
wl1251_error("irq missing in platform data");
|
|
return -ENODEV;
|
|
}
|
|
|
|
wl->use_eeprom = pdata->use_eeprom;
|
|
|
|
ret = request_irq(wl->irq, wl1251_irq, 0, DRIVER_NAME, wl);
|
|
if (ret < 0) {
|
|
wl1251_error("request_irq() failed: %d", ret);
|
|
goto out_free;
|
|
}
|
|
|
|
set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING);
|
|
|
|
disable_irq(wl->irq);
|
|
|
|
ret = wl1251_init_ieee80211(wl);
|
|
if (ret)
|
|
goto out_irq;
|
|
|
|
return 0;
|
|
|
|
out_irq:
|
|
free_irq(wl->irq, wl);
|
|
|
|
out_free:
|
|
ieee80211_free_hw(hw);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __devexit wl1251_spi_remove(struct spi_device *spi)
|
|
{
|
|
struct wl1251 *wl = dev_get_drvdata(&spi->dev);
|
|
|
|
free_irq(wl->irq, wl);
|
|
wl1251_free_hw(wl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct spi_driver wl1251_spi_driver = {
|
|
.driver = {
|
|
.name = "wl1251",
|
|
.bus = &spi_bus_type,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
|
|
.probe = wl1251_spi_probe,
|
|
.remove = __devexit_p(wl1251_spi_remove),
|
|
};
|
|
|
|
static int __init wl1251_spi_init(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = spi_register_driver(&wl1251_spi_driver);
|
|
if (ret < 0) {
|
|
wl1251_error("failed to register spi driver: %d", ret);
|
|
goto out;
|
|
}
|
|
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static void __exit wl1251_spi_exit(void)
|
|
{
|
|
spi_unregister_driver(&wl1251_spi_driver);
|
|
|
|
wl1251_notice("unloaded");
|
|
}
|
|
|
|
module_init(wl1251_spi_init);
|
|
module_exit(wl1251_spi_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Kalle Valo <kalle.valo@nokia.com>");
|