linux/drivers/net/wireless/rtlwifi/ps.h
Larry Finger 25b13dbc38 rtlwifi: Move common routines to core
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-06 14:29:56 -05:00

115 lines
3.8 KiB
C

/******************************************************************************
*
* Copyright(c) 2009-2012 Realtek Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
* The full GNU General Public License is included in this distribution in the
* file called LICENSE.
*
* Contact Information:
* wlanfae <wlanfae@realtek.com>
* Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
* Hsinchu 300, Taiwan.
*
* Larry Finger <Larry.Finger@lwfinger.net>
*
*****************************************************************************/
#ifndef __REALTEK_RTL_PCI_PS_H__
#define __REALTEK_RTL_PCI_PS_H__
#define MAX_SW_LPS_SLEEP_INTV 5
/*---------------------------------------------
* 3 The value of cmd: 4 bits
*---------------------------------------------
*/
#define PWR_CMD_READ 0x00
#define PWR_CMD_WRITE 0x01
#define PWR_CMD_POLLING 0x02
#define PWR_CMD_DELAY 0x03
#define PWR_CMD_END 0x04
/* define the base address of each block */
#define PWR_BASEADDR_MAC 0x00
#define PWR_BASEADDR_USB 0x01
#define PWR_BASEADDR_PCIE 0x02
#define PWR_BASEADDR_SDIO 0x03
#define PWR_FAB_ALL_MSK (BIT(0)|BIT(1)|BIT(2)|BIT(3))
#define PWR_CUT_TESTCHIP_MSK BIT(0)
#define PWR_CUT_A_MSK BIT(1)
#define PWR_CUT_B_MSK BIT(2)
#define PWR_CUT_C_MSK BIT(3)
#define PWR_CUT_D_MSK BIT(4)
#define PWR_CUT_E_MSK BIT(5)
#define PWR_CUT_F_MSK BIT(6)
#define PWR_CUT_G_MSK BIT(7)
#define PWR_CUT_ALL_MSK 0xFF
#define PWR_INTF_SDIO_MSK BIT(0)
#define PWR_INTF_USB_MSK BIT(1)
#define PWR_INTF_PCI_MSK BIT(2)
#define PWR_INTF_ALL_MSK (BIT(0)|BIT(1)|BIT(2)|BIT(3))
enum pwrseq_delay_unit {
PWRSEQ_DELAY_US,
PWRSEQ_DELAY_MS,
};
struct wlan_pwr_cfg {
u16 offset;
u8 cut_msk;
u8 fab_msk:4;
u8 interface_msk:4;
u8 base:4;
u8 cmd:4;
u8 msk;
u8 value;
};
#define GET_PWR_CFG_OFFSET(__PWR_CMD) (__PWR_CMD.offset)
#define GET_PWR_CFG_CUT_MASK(__PWR_CMD) (__PWR_CMD.cut_msk)
#define GET_PWR_CFG_FAB_MASK(__PWR_CMD) (__PWR_CMD.fab_msk)
#define GET_PWR_CFG_INTF_MASK(__PWR_CMD) (__PWR_CMD.interface_msk)
#define GET_PWR_CFG_BASE(__PWR_CMD) (__PWR_CMD.base)
#define GET_PWR_CFG_CMD(__PWR_CMD) (__PWR_CMD.cmd)
#define GET_PWR_CFG_MASK(__PWR_CMD) (__PWR_CMD.msk)
#define GET_PWR_CFG_VALUE(__PWR_CMD) (__PWR_CMD.value)
bool rtl_hal_pwrseqcmdparsing(struct rtl_priv *rtlpriv, u8 cut_version,
u8 fab_version, u8 interface_type,
struct wlan_pwr_cfg pwrcfgcmd[]);
bool rtl_ps_set_rf_state(struct ieee80211_hw *hw,
enum rf_pwrstate state_toset, u32 changesource);
bool rtl_ps_enable_nic(struct ieee80211_hw *hw);
bool rtl_ps_disable_nic(struct ieee80211_hw *hw);
void rtl_ips_nic_off(struct ieee80211_hw *hw);
void rtl_ips_nic_on(struct ieee80211_hw *hw);
void rtl_ips_nic_off_wq_callback(void *data);
void rtl_lps_enter(struct ieee80211_hw *hw);
void rtl_lps_leave(struct ieee80211_hw *hw);
void rtl_swlps_beacon(struct ieee80211_hw *hw, void *data, unsigned int len);
void rtl_swlps_wq_callback(void *data);
void rtl_swlps_rfon_wq_callback(void *data);
void rtl_swlps_rf_awake(struct ieee80211_hw *hw);
void rtl_swlps_rf_sleep(struct ieee80211_hw *hw);
void rtl_p2p_ps_cmd(struct ieee80211_hw *hw, u8 p2p_ps_state);
void rtl_p2p_info(struct ieee80211_hw *hw, void *data, unsigned int len);
void rtl_lps_change_work_callback(struct work_struct *work);
#endif