forked from Minki/linux
f5a246eab9
This contains pretty many small commits covering fairly large range of files in sound/ directory. Partly because of additional API support and partly because of constantly developed ASoC and ARM stuff. Some highlights: - Introduced the helper function and documentation for exposing the channel map via control API, as discussed in Plumbers; most of PCI drivers are covered, will follow more drivers later - Most of drivers have been replaced with the new PM callbacks (if the bus is supported) - HD-audio controller got the support of runtime PM and the support of D3 clock-stop. Also changing the power_save option in sysfs kicks off immediately to enable / disable the power-save mode. - Another significant code change in HD-audio is the rewrite of firmware loading code. Other than that, most of changes in HD-audio are continued cleanups and standardization for the generic auto parser and bug fixes (HBR, device-specific fixups), in addition to the support of channel-map API. - Addition of ASoC bindings for the compressed API, used by the mid-x86 drivers. - Lots of cleanups and API refreshes for ASoC codec drivers and DaVinci. - Conversion of OMAP to dmaengine. - New machine driver for Wolfson Microelectronics Bells. - New CODEC driver for Wolfson Microelectronics WM0010. - Enhancements to the ux500 and wm2000 drivers - A new driver for DA9055 and the support for regulator bypass mode. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) iQIcBAABAgAGBQJQcpeWAAoJEGwxgFQ9KSmkpi4P/2etDDz5aEkEHNa1l4xEmFcm ymiGTgjaalqpUAVbM/gYx9G59EFMEbzUl1BHAqE5La4wO/v9lNPb+VrdUo+B+NZ7 WSxIPWcNqdinSuoSqyYPjoPMVnhs3EMtNOqmf4jm1JOvdqA+4rO29xQVAqK/5Gfu LpMOyPiRi5ODnbQ1BOIWwpKICioY/mLwGJudK3z0i/fYVA7gLub20f+w+sOjKIA4 wmwQAMTjAR798Cg/tVy4fQmf4SLw+c2nIgGe/PD+2gVlGXLNKBrJfMonHPTbmwKu lmJO/EtnijNOnpbn6up7ryUQ9cSoZAUZOfdIOgmAeQgQ/LWR0f+zf2IQehSPwrul g6hqOnQI2DNN7ugT3cYVbYnsh56TjyhnxhhxZgkapqh706QkqHGyKJNMRetzuXmP 1O//MnZJrFQWd6sOKLlTL2ZzRvnxEJcNVGaE6bbwZTfQMtPeo9l1842uIq1dLUtG VxZb/svKUkMXv4is1dwUYUkpDsKxsgMEmabmuovceGf2N7jj/irkXgqxf6LWkaY1 JQ7ZFWUJyDzEMXRaFfzdGO15T532CfB84wvFX5xoPMwMste2AA7QuybFBVstXhKu AtKNDgRJFUTlnLIxydpPBWdWH3UJdEaFwwsSfuNKI8OmmGKhWC/aP83k4hzueu9H KYLvY/0ObMSMqiwh/ndQ =uNqD -----END PGP SIGNATURE----- Merge tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This contains pretty many small commits covering fairly large range of files in sound/ directory. Partly because of additional API support and partly because of constantly developed ASoC and ARM stuff. Some highlights: - Introduced the helper function and documentation for exposing the channel map via control API, as discussed in Plumbers; most of PCI drivers are covered, will follow more drivers later - Most of drivers have been replaced with the new PM callbacks (if the bus is supported) - HD-audio controller got the support of runtime PM and the support of D3 clock-stop. Also changing the power_save option in sysfs kicks off immediately to enable / disable the power-save mode. - Another significant code change in HD-audio is the rewrite of firmware loading code. Other than that, most of changes in HD-audio are continued cleanups and standardization for the generic auto parser and bug fixes (HBR, device-specific fixups), in addition to the support of channel-map API. - Addition of ASoC bindings for the compressed API, used by the mid-x86 drivers. - Lots of cleanups and API refreshes for ASoC codec drivers and DaVinci. - Conversion of OMAP to dmaengine. - New machine driver for Wolfson Microelectronics Bells. - New CODEC driver for Wolfson Microelectronics WM0010. - Enhancements to the ux500 and wm2000 drivers - A new driver for DA9055 and the support for regulator bypass mode." Fix up various arm soc header file reorg conflicts. * tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (339 commits) ALSA: hda - Add new codec ALC283 ALC290 support ALSA: hda - avoid unneccesary indices on "Headphone Jack" controls ALSA: hda - fix indices on boost volume on Conexant ALSA: aloop - add locking to timer access ALSA: hda - Fix hang caused by race during suspend. sound: Remove unnecessary semicolon ALSA: hda/realtek - Fix detection of ALC271X codec ALSA: hda - Add inverted internal mic quirk for Lenovo IdeaPad U310 ALSA: hda - make Realtek/Sigmatel/Conexant use the generic unsol event ALSA: hda - make a generic unsol event handler ASoC: codecs: Add DA9055 codec driver ASoC: eukrea-tlv320: Convert it to platform driver ALSA: ASoC: add DT bindings for CS4271 ASoC: wm_hubs: Ensure volume updates are handled during class W startup ASoC: wm5110: Adding missing volume update bits ASoC: wm5110: Add OUT3R support ASoC: wm5110: Add AEC loopback support ASoC: wm5110: Rename EPOUT to HPOUT3 ASoC: arizona: Add more clock rates ASoC: arizona: Add more DSP options for mixer input muxes ...
344 lines
8.1 KiB
C
344 lines
8.1 KiB
C
/*
|
|
* mach-davinci/devices.c
|
|
*
|
|
* DaVinci platform device setup/initialization
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/io.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <linux/platform_data/i2c-davinci.h>
|
|
#include <mach/irqs.h>
|
|
#include <mach/cputype.h>
|
|
#include <mach/mux.h>
|
|
#include <mach/edma.h>
|
|
#include <linux/platform_data/mmc-davinci.h>
|
|
#include <mach/time.h>
|
|
|
|
#include "davinci.h"
|
|
#include "clock.h"
|
|
|
|
#define DAVINCI_I2C_BASE 0x01C21000
|
|
#define DAVINCI_ATA_BASE 0x01C66000
|
|
#define DAVINCI_MMCSD0_BASE 0x01E10000
|
|
#define DM355_MMCSD0_BASE 0x01E11000
|
|
#define DM355_MMCSD1_BASE 0x01E00000
|
|
#define DM365_MMCSD0_BASE 0x01D11000
|
|
#define DM365_MMCSD1_BASE 0x01D00000
|
|
|
|
void __iomem *davinci_sysmod_base;
|
|
|
|
void davinci_map_sysmod(void)
|
|
{
|
|
davinci_sysmod_base = ioremap_nocache(DAVINCI_SYSTEM_MODULE_BASE,
|
|
0x800);
|
|
/*
|
|
* Throw a bug since a lot of board initialization code depends
|
|
* on system module availability. ioremap() failing this early
|
|
* need careful looking into anyway.
|
|
*/
|
|
BUG_ON(!davinci_sysmod_base);
|
|
}
|
|
|
|
static struct resource i2c_resources[] = {
|
|
{
|
|
.start = DAVINCI_I2C_BASE,
|
|
.end = DAVINCI_I2C_BASE + 0x40,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = IRQ_I2C,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device davinci_i2c_device = {
|
|
.name = "i2c_davinci",
|
|
.id = 1,
|
|
.num_resources = ARRAY_SIZE(i2c_resources),
|
|
.resource = i2c_resources,
|
|
};
|
|
|
|
void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata)
|
|
{
|
|
if (cpu_is_davinci_dm644x())
|
|
davinci_cfg_reg(DM644X_I2C);
|
|
|
|
davinci_i2c_device.dev.platform_data = pdata;
|
|
(void) platform_device_register(&davinci_i2c_device);
|
|
}
|
|
|
|
static struct resource ide_resources[] = {
|
|
{
|
|
.start = DAVINCI_ATA_BASE,
|
|
.end = DAVINCI_ATA_BASE + 0x7ff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = IRQ_IDE,
|
|
.end = IRQ_IDE,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static u64 ide_dma_mask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device ide_device = {
|
|
.name = "palm_bk3710",
|
|
.id = -1,
|
|
.resource = ide_resources,
|
|
.num_resources = ARRAY_SIZE(ide_resources),
|
|
.dev = {
|
|
.dma_mask = &ide_dma_mask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
},
|
|
};
|
|
|
|
void __init davinci_init_ide(void)
|
|
{
|
|
if (cpu_is_davinci_dm644x()) {
|
|
davinci_cfg_reg(DM644X_HPIEN_DISABLE);
|
|
davinci_cfg_reg(DM644X_ATAEN);
|
|
davinci_cfg_reg(DM644X_HDIREN);
|
|
} else if (cpu_is_davinci_dm646x()) {
|
|
/* IRQ_DM646X_IDE is the same as IRQ_IDE */
|
|
davinci_cfg_reg(DM646X_ATAEN);
|
|
} else {
|
|
WARN_ON(1);
|
|
return;
|
|
}
|
|
|
|
platform_device_register(&ide_device);
|
|
}
|
|
|
|
#if defined(CONFIG_MMC_DAVINCI) || defined(CONFIG_MMC_DAVINCI_MODULE)
|
|
|
|
static u64 mmcsd0_dma_mask = DMA_BIT_MASK(32);
|
|
|
|
static struct resource mmcsd0_resources[] = {
|
|
{
|
|
/* different on dm355 */
|
|
.start = DAVINCI_MMCSD0_BASE,
|
|
.end = DAVINCI_MMCSD0_BASE + SZ_4K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
/* IRQs: MMC/SD, then SDIO */
|
|
{
|
|
.start = IRQ_MMCINT,
|
|
.flags = IORESOURCE_IRQ,
|
|
}, {
|
|
/* different on dm355 */
|
|
.start = IRQ_SDIOINT,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
/* DMA channels: RX, then TX */
|
|
{
|
|
.start = EDMA_CTLR_CHAN(0, DAVINCI_DMA_MMCRXEVT),
|
|
.flags = IORESOURCE_DMA,
|
|
}, {
|
|
.start = EDMA_CTLR_CHAN(0, DAVINCI_DMA_MMCTXEVT),
|
|
.flags = IORESOURCE_DMA,
|
|
},
|
|
};
|
|
|
|
static struct platform_device davinci_mmcsd0_device = {
|
|
.name = "davinci_mmc",
|
|
.id = 0,
|
|
.dev = {
|
|
.dma_mask = &mmcsd0_dma_mask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
},
|
|
.num_resources = ARRAY_SIZE(mmcsd0_resources),
|
|
.resource = mmcsd0_resources,
|
|
};
|
|
|
|
static u64 mmcsd1_dma_mask = DMA_BIT_MASK(32);
|
|
|
|
static struct resource mmcsd1_resources[] = {
|
|
{
|
|
.start = DM355_MMCSD1_BASE,
|
|
.end = DM355_MMCSD1_BASE + SZ_4K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
/* IRQs: MMC/SD, then SDIO */
|
|
{
|
|
.start = IRQ_DM355_MMCINT1,
|
|
.flags = IORESOURCE_IRQ,
|
|
}, {
|
|
.start = IRQ_DM355_SDIOINT1,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
/* DMA channels: RX, then TX */
|
|
{
|
|
.start = EDMA_CTLR_CHAN(0, 30), /* rx */
|
|
.flags = IORESOURCE_DMA,
|
|
}, {
|
|
.start = EDMA_CTLR_CHAN(0, 31), /* tx */
|
|
.flags = IORESOURCE_DMA,
|
|
},
|
|
};
|
|
|
|
static struct platform_device davinci_mmcsd1_device = {
|
|
.name = "davinci_mmc",
|
|
.id = 1,
|
|
.dev = {
|
|
.dma_mask = &mmcsd1_dma_mask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
},
|
|
.num_resources = ARRAY_SIZE(mmcsd1_resources),
|
|
.resource = mmcsd1_resources,
|
|
};
|
|
|
|
|
|
void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
|
|
{
|
|
struct platform_device *pdev = NULL;
|
|
|
|
if (WARN_ON(cpu_is_davinci_dm646x()))
|
|
return;
|
|
|
|
/* REVISIT: update PINMUX, ARM_IRQMUX, and EDMA_EVTMUX here too;
|
|
* for example if MMCSD1 is used for SDIO, maybe DAT2 is unused.
|
|
*
|
|
* FIXME dm6441 (no MMC/SD), dm357 (one), and dm335 (two) are
|
|
* not handled right here ...
|
|
*/
|
|
switch (module) {
|
|
case 1:
|
|
if (cpu_is_davinci_dm355()) {
|
|
/* REVISIT we may not need all these pins if e.g. this
|
|
* is a hard-wired SDIO device...
|
|
*/
|
|
davinci_cfg_reg(DM355_SD1_CMD);
|
|
davinci_cfg_reg(DM355_SD1_CLK);
|
|
davinci_cfg_reg(DM355_SD1_DATA0);
|
|
davinci_cfg_reg(DM355_SD1_DATA1);
|
|
davinci_cfg_reg(DM355_SD1_DATA2);
|
|
davinci_cfg_reg(DM355_SD1_DATA3);
|
|
} else if (cpu_is_davinci_dm365()) {
|
|
/* Configure pull down control */
|
|
unsigned v;
|
|
|
|
v = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_PUPDCTL1));
|
|
__raw_writel(v & ~0xfc0,
|
|
DAVINCI_SYSMOD_VIRT(SYSMOD_PUPDCTL1));
|
|
|
|
mmcsd1_resources[0].start = DM365_MMCSD1_BASE;
|
|
mmcsd1_resources[0].end = DM365_MMCSD1_BASE +
|
|
SZ_4K - 1;
|
|
mmcsd1_resources[2].start = IRQ_DM365_SDIOINT1;
|
|
} else
|
|
break;
|
|
|
|
pdev = &davinci_mmcsd1_device;
|
|
break;
|
|
case 0:
|
|
if (cpu_is_davinci_dm355()) {
|
|
mmcsd0_resources[0].start = DM355_MMCSD0_BASE;
|
|
mmcsd0_resources[0].end = DM355_MMCSD0_BASE + SZ_4K - 1;
|
|
mmcsd0_resources[2].start = IRQ_DM355_SDIOINT0;
|
|
|
|
/* expose all 6 MMC0 signals: CLK, CMD, DATA[0..3] */
|
|
davinci_cfg_reg(DM355_MMCSD0);
|
|
|
|
/* enable RX EDMA */
|
|
davinci_cfg_reg(DM355_EVT26_MMC0_RX);
|
|
} else if (cpu_is_davinci_dm365()) {
|
|
mmcsd0_resources[0].start = DM365_MMCSD0_BASE;
|
|
mmcsd0_resources[0].end = DM365_MMCSD0_BASE +
|
|
SZ_4K - 1;
|
|
mmcsd0_resources[2].start = IRQ_DM365_SDIOINT0;
|
|
} else if (cpu_is_davinci_dm644x()) {
|
|
/* REVISIT: should this be in board-init code? */
|
|
/* Power-on 3.3V IO cells */
|
|
__raw_writel(0,
|
|
DAVINCI_SYSMOD_VIRT(SYSMOD_VDD3P3VPWDN));
|
|
/*Set up the pull regiter for MMC */
|
|
davinci_cfg_reg(DM644X_MSTK);
|
|
}
|
|
|
|
pdev = &davinci_mmcsd0_device;
|
|
break;
|
|
}
|
|
|
|
if (WARN_ON(!pdev))
|
|
return;
|
|
|
|
pdev->dev.platform_data = config;
|
|
platform_device_register(pdev);
|
|
}
|
|
|
|
#else
|
|
|
|
void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
|
|
{
|
|
}
|
|
|
|
#endif
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static struct resource wdt_resources[] = {
|
|
{
|
|
.start = DAVINCI_WDOG_BASE,
|
|
.end = DAVINCI_WDOG_BASE + SZ_1K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
struct platform_device davinci_wdt_device = {
|
|
.name = "watchdog",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(wdt_resources),
|
|
.resource = wdt_resources,
|
|
};
|
|
|
|
void davinci_restart(char mode, const char *cmd)
|
|
{
|
|
davinci_watchdog_reset(&davinci_wdt_device);
|
|
}
|
|
|
|
static void davinci_init_wdt(void)
|
|
{
|
|
platform_device_register(&davinci_wdt_device);
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
struct davinci_timer_instance davinci_timer_instance[2] = {
|
|
{
|
|
.base = DAVINCI_TIMER0_BASE,
|
|
.bottom_irq = IRQ_TINT0_TINT12,
|
|
.top_irq = IRQ_TINT0_TINT34,
|
|
},
|
|
{
|
|
.base = DAVINCI_TIMER1_BASE,
|
|
.bottom_irq = IRQ_TINT1_TINT12,
|
|
.top_irq = IRQ_TINT1_TINT34,
|
|
},
|
|
};
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int __init davinci_init_devices(void)
|
|
{
|
|
/* please keep these calls, and their implementations above,
|
|
* in alphabetical order so they're easier to sort through.
|
|
*/
|
|
davinci_init_wdt();
|
|
|
|
return 0;
|
|
}
|
|
arch_initcall(davinci_init_devices);
|
|
|