linux/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
Jeff Kirsher 1c1538be1d pch_gbe: Move the OKI Semiconductor driver
Move the OKI Semiconductor driver into driver/net/ethernet/oki-semi/
and make the necessary Kconfig and Makefile changes.

Note: there is no documented maintainer for this driver, so I CC'd
the last 2 major contributors.

CC: Tomoya <tomoya-linux@dsn.okisemi.com>
CC: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-12 00:21:47 -07:00

37 lines
1.5 KiB
C

/*
* Copyright (C) 1999 - 2010 Intel Corporation.
* Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD.
*
* This code was derived from the Intel e1000e Linux driver.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
*/
#ifndef _PCH_GBE_API_H_
#define _PCH_GBE_API_H_
#include "pch_gbe_phy.h"
s32 pch_gbe_hal_setup_init_funcs(struct pch_gbe_hw *hw);
void pch_gbe_hal_get_bus_info(struct pch_gbe_hw *hw);
s32 pch_gbe_hal_init_hw(struct pch_gbe_hw *hw);
s32 pch_gbe_hal_read_phy_reg(struct pch_gbe_hw *hw, u32 offset, u16 *data);
s32 pch_gbe_hal_write_phy_reg(struct pch_gbe_hw *hw, u32 offset, u16 data);
void pch_gbe_hal_phy_hw_reset(struct pch_gbe_hw *hw);
void pch_gbe_hal_phy_sw_reset(struct pch_gbe_hw *hw);
s32 pch_gbe_hal_read_mac_addr(struct pch_gbe_hw *hw);
void pch_gbe_hal_power_up_phy(struct pch_gbe_hw *hw);
void pch_gbe_hal_power_down_phy(struct pch_gbe_hw *hw);
#endif