forked from Minki/linux
8f5260c8c1
The following patch is a first step to convert the 'struct pad_desc' to a bitmapped cookie to facilitate adding platform specific pullup or drive strength definitions to existing pad definitions without need to rewrite the complete pad def. The patch wraps 'struct pad_desc' in an opaque data type and introduces macros to access the individual members. This patch does not constitute any functional change! Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
297 lines
7.1 KiB
C
297 lines
7.1 KiB
C
/*
|
|
* Copyright (C) 2010 Eric Benard - eric@eukrea.com
|
|
*
|
|
* Based on pcm970-baseboard.c which is :
|
|
* Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
|
* MA 02110-1301, USA.
|
|
*/
|
|
|
|
#include <linux/gpio.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/gpio_keys.h>
|
|
#include <linux/input.h>
|
|
#include <video/platform_lcd.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <mach/iomux-mx25.h>
|
|
#include <mach/common.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <mach/mx25.h>
|
|
#include <mach/imx-uart.h>
|
|
#include <mach/audmux.h>
|
|
|
|
#include "devices-imx25.h"
|
|
|
|
static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
|
|
/* LCD */
|
|
MX25_PAD_LD0__LD0,
|
|
MX25_PAD_LD1__LD1,
|
|
MX25_PAD_LD2__LD2,
|
|
MX25_PAD_LD3__LD3,
|
|
MX25_PAD_LD4__LD4,
|
|
MX25_PAD_LD5__LD5,
|
|
MX25_PAD_LD6__LD6,
|
|
MX25_PAD_LD7__LD7,
|
|
MX25_PAD_LD8__LD8,
|
|
MX25_PAD_LD9__LD9,
|
|
MX25_PAD_LD10__LD10,
|
|
MX25_PAD_LD11__LD11,
|
|
MX25_PAD_LD12__LD12,
|
|
MX25_PAD_LD13__LD13,
|
|
MX25_PAD_LD14__LD14,
|
|
MX25_PAD_LD15__LD15,
|
|
MX25_PAD_GPIO_E__LD16,
|
|
MX25_PAD_GPIO_F__LD17,
|
|
MX25_PAD_HSYNC__HSYNC,
|
|
MX25_PAD_VSYNC__VSYNC,
|
|
MX25_PAD_LSCLK__LSCLK,
|
|
MX25_PAD_OE_ACD__OE_ACD,
|
|
MX25_PAD_CONTRAST__CONTRAST,
|
|
/* LCD_PWR */
|
|
MX25_PAD_PWM__GPIO_1_26,
|
|
/* LED */
|
|
MX25_PAD_POWER_FAIL__GPIO_3_19,
|
|
/* SWITCH */
|
|
MX25_PAD_VSTBY_ACK__GPIO_3_18,
|
|
/* UART2 */
|
|
MX25_PAD_UART2_RTS__UART2_RTS,
|
|
MX25_PAD_UART2_CTS__UART2_CTS,
|
|
MX25_PAD_UART2_TXD__UART2_TXD,
|
|
MX25_PAD_UART2_RXD__UART2_RXD,
|
|
/* SD1 */
|
|
MX25_PAD_SD1_CMD__SD1_CMD,
|
|
MX25_PAD_SD1_CLK__SD1_CLK,
|
|
MX25_PAD_SD1_DATA0__SD1_DATA0,
|
|
MX25_PAD_SD1_DATA1__SD1_DATA1,
|
|
MX25_PAD_SD1_DATA2__SD1_DATA2,
|
|
MX25_PAD_SD1_DATA3__SD1_DATA3,
|
|
/* SD1 CD */
|
|
MX25_PAD_DE_B__GPIO_2_20,
|
|
/* I2S */
|
|
MX25_PAD_KPP_COL3__AUD5_TXFS,
|
|
MX25_PAD_KPP_COL2__AUD5_TXC,
|
|
MX25_PAD_KPP_COL1__AUD5_RXD,
|
|
MX25_PAD_KPP_COL0__AUD5_TXD,
|
|
/* CAN */
|
|
MX25_PAD_GPIO_D__CAN2_RX,
|
|
MX25_PAD_GPIO_C__CAN2_TX,
|
|
};
|
|
|
|
#define GPIO_LED1 83
|
|
#define GPIO_SWITCH1 82
|
|
#define GPIO_SD1CD 52
|
|
#define GPIO_LCDPWR 26
|
|
|
|
static struct imx_fb_videomode eukrea_mximxsd_modes[] = {
|
|
{
|
|
.mode = {
|
|
.name = "CMO-QVGA",
|
|
.refresh = 60,
|
|
.xres = 320,
|
|
.yres = 240,
|
|
.pixclock = KHZ2PICOS(6500),
|
|
.left_margin = 30,
|
|
.right_margin = 38,
|
|
.upper_margin = 20,
|
|
.lower_margin = 3,
|
|
.hsync_len = 15,
|
|
.vsync_len = 4,
|
|
},
|
|
.bpp = 16,
|
|
.pcr = 0xCAD08B80,
|
|
}, {
|
|
.mode = {
|
|
.name = "DVI-VGA",
|
|
.refresh = 60,
|
|
.xres = 640,
|
|
.yres = 480,
|
|
.pixclock = 32000,
|
|
.hsync_len = 7,
|
|
.left_margin = 100,
|
|
.right_margin = 100,
|
|
.vsync_len = 7,
|
|
.upper_margin = 7,
|
|
.lower_margin = 100,
|
|
},
|
|
.pcr = 0xFA208B80,
|
|
.bpp = 16,
|
|
}, {
|
|
.mode = {
|
|
.name = "DVI-SVGA",
|
|
.refresh = 60,
|
|
.xres = 800,
|
|
.yres = 600,
|
|
.pixclock = 25000,
|
|
.hsync_len = 7,
|
|
.left_margin = 75,
|
|
.right_margin = 75,
|
|
.vsync_len = 7,
|
|
.upper_margin = 7,
|
|
.lower_margin = 75,
|
|
},
|
|
.pcr = 0xFA208B80,
|
|
.bpp = 16,
|
|
},
|
|
};
|
|
|
|
static const struct imx_fb_platform_data eukrea_mximxsd_fb_pdata __initconst = {
|
|
.mode = eukrea_mximxsd_modes,
|
|
.num_modes = ARRAY_SIZE(eukrea_mximxsd_modes),
|
|
.pwmr = 0x00A903FF,
|
|
.lscr1 = 0x00120300,
|
|
.dmacr = 0x00040060,
|
|
};
|
|
|
|
static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
|
|
unsigned int power)
|
|
{
|
|
if (power)
|
|
gpio_direction_output(GPIO_LCDPWR, 1);
|
|
else
|
|
gpio_direction_output(GPIO_LCDPWR, 0);
|
|
}
|
|
|
|
static struct plat_lcd_data eukrea_mbimxsd_lcd_power_data = {
|
|
.set_power = eukrea_mbimxsd_lcd_power_set,
|
|
};
|
|
|
|
static struct platform_device eukrea_mbimxsd_lcd_powerdev = {
|
|
.name = "platform-lcd",
|
|
.dev.platform_data = &eukrea_mbimxsd_lcd_power_data,
|
|
};
|
|
|
|
static struct gpio_led eukrea_mbimxsd_leds[] = {
|
|
{
|
|
.name = "led1",
|
|
.default_trigger = "heartbeat",
|
|
.active_low = 1,
|
|
.gpio = GPIO_LED1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_led_platform_data eukrea_mbimxsd_led_info = {
|
|
.leds = eukrea_mbimxsd_leds,
|
|
.num_leds = ARRAY_SIZE(eukrea_mbimxsd_leds),
|
|
};
|
|
|
|
static struct platform_device eukrea_mbimxsd_leds_gpio = {
|
|
.name = "leds-gpio",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &eukrea_mbimxsd_led_info,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
|
|
{
|
|
.gpio = GPIO_SWITCH1,
|
|
.code = BTN_0,
|
|
.desc = "BP1",
|
|
.active_low = 1,
|
|
.wakeup = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_platform_data eukrea_mbimxsd_button_data = {
|
|
.buttons = eukrea_mbimxsd_gpio_buttons,
|
|
.nbuttons = ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
|
|
};
|
|
|
|
static struct platform_device eukrea_mbimxsd_button_device = {
|
|
.name = "gpio-keys",
|
|
.id = -1,
|
|
.num_resources = 0,
|
|
.dev = {
|
|
.platform_data = &eukrea_mbimxsd_button_data,
|
|
}
|
|
};
|
|
|
|
static struct platform_device *platform_devices[] __initdata = {
|
|
&eukrea_mbimxsd_leds_gpio,
|
|
&eukrea_mbimxsd_button_device,
|
|
&eukrea_mbimxsd_lcd_powerdev,
|
|
};
|
|
|
|
static const struct imxuart_platform_data uart_pdata __initconst = {
|
|
.flags = IMXUART_HAVE_RTSCTS,
|
|
};
|
|
|
|
static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
|
|
{
|
|
I2C_BOARD_INFO("tlv320aic23", 0x1a),
|
|
},
|
|
};
|
|
|
|
static const
|
|
struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = {
|
|
.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
|
|
};
|
|
|
|
/*
|
|
* system init for baseboard usage. Will be called by cpuimx25 init.
|
|
*
|
|
* Add platform devices present on this baseboard and init
|
|
* them from CPU side as far as required to use them later on
|
|
*/
|
|
void __init eukrea_mbimxsd25_baseboard_init(void)
|
|
{
|
|
if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
|
|
ARRAY_SIZE(eukrea_mbimxsd_pads)))
|
|
printk(KERN_ERR "error setting mbimxsd pads !\n");
|
|
|
|
#if defined(CONFIG_SND_SOC_EUKREA_TLV320)
|
|
/* SSI unit master I2S codec connected to SSI_AUD5*/
|
|
mxc_audmux_v2_configure_port(0,
|
|
MXC_AUDMUX_V2_PTCR_SYN |
|
|
MXC_AUDMUX_V2_PTCR_TFSDIR |
|
|
MXC_AUDMUX_V2_PTCR_TFSEL(4) |
|
|
MXC_AUDMUX_V2_PTCR_TCLKDIR |
|
|
MXC_AUDMUX_V2_PTCR_TCSEL(4),
|
|
MXC_AUDMUX_V2_PDCR_RXDSEL(4)
|
|
);
|
|
mxc_audmux_v2_configure_port(4,
|
|
MXC_AUDMUX_V2_PTCR_SYN,
|
|
MXC_AUDMUX_V2_PDCR_RXDSEL(0)
|
|
);
|
|
#endif
|
|
|
|
imx25_add_imx_uart1(&uart_pdata);
|
|
imx25_add_imx_fb(&eukrea_mximxsd_fb_pdata);
|
|
imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
|
|
|
|
imx25_add_flexcan1(NULL);
|
|
imx25_add_sdhci_esdhc_imx(0, NULL);
|
|
|
|
gpio_request(GPIO_LED1, "LED1");
|
|
gpio_direction_output(GPIO_LED1, 1);
|
|
gpio_free(GPIO_LED1);
|
|
|
|
gpio_request(GPIO_SWITCH1, "SWITCH1");
|
|
gpio_direction_input(GPIO_SWITCH1);
|
|
gpio_free(GPIO_SWITCH1);
|
|
|
|
gpio_request(GPIO_LCDPWR, "LCDPWR");
|
|
gpio_direction_output(GPIO_LCDPWR, 1);
|
|
gpio_free(GPIO_SWITCH1);
|
|
|
|
i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
|
|
ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
|
|
|
|
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
|
|
}
|