linux/arch/arm/mm
Mark Rutland 8586831317 ARM: 8128/1: abort: don't clear the exclusive monitors
The ARMv6 and ARMv7 early abort handlers clear the exclusive monitors
upon entry to the kernel, but this is redundant:

  - We clear the monitors on every exception return since commit
    200b812d00 ("Clear the exclusive monitor when returning from an
    exception"), so this is not necessary to ensure the monitors are
    cleared before returning from a fault handler.

  - Any dummy STREX will target a temporary scratch area in memory, and
    may succeed or fail without corrupting useful data. Its status value
    will not be used.

  - Any other STREX in the kernel must be preceded by an LDREX, which
    will initialise the monitors consistently and will not depend on the
    earlier state of the monitors.

Therefore we have no reason to care about the initial state of the
exclusive monitors when a data abort is taken, and clearing the monitors
prior to exception return (as we already do) is sufficient.

This patch removes the redundant clearing of the exclusive monitors from
the early abort handlers.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-08-27 15:40:12 +01:00
..
abort-ev4.S
abort-ev4t.S
abort-ev5t.S
abort-ev5tj.S
abort-ev6.S ARM: 8128/1: abort: don't clear the exclusive monitors 2014-08-27 15:40:12 +01:00
abort-ev7.S ARM: 8128/1: abort: don't clear the exclusive monitors 2014-08-27 15:40:12 +01:00
abort-lv4t.S
abort-macro.S
abort-nommu.S
alignment.c ARM: alignment: save last kernel aligned fault location 2014-07-18 12:29:06 +01:00
cache-aurora-l2.h
cache-fa.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
cache-feroceon-l2.c ARM: l2c: remove outer_inv_all() method 2014-05-22 16:21:35 +01:00
cache-l2x0.c Merge branches 'fixes' and 'misc' into for-next 2014-08-05 10:27:13 +01:00
cache-nop.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
cache-tauros2.c ARM: cache-tauros2: remove ARMv6 code 2014-03-27 02:49:24 +01:00
cache-tauros3.h ARM: 7922/1: l2x0: add Marvell Tauros3 support 2013-12-29 12:32:47 +00:00
cache-v4.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
cache-v4wb.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
cache-v4wt.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
cache-v6.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
cache-v7.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
cache-xsc3l2.c
context.c ARM: 7926/1: mm: flesh out and fix the comments in the ASID allocator 2013-12-29 12:46:49 +00:00
copypage-fa.c
copypage-feroceon.c
copypage-v4mc.c
copypage-v4wb.c
copypage-v4wt.c
copypage-v6.c
copypage-xsc3.c
copypage-xscale.c
dma-mapping.c CMA: generalize CMA reserved area management functionality 2014-08-06 18:01:16 -07:00
dump.c ARM: 8109/1: mm: Modify pte_write and pmd_write logic for LPAE 2014-07-24 14:27:08 +01:00
extable.c ARM: 7876/1: clear Thumb-2 IT state on exception handling 2013-11-07 00:15:49 +00:00
fault-armv.c mm: rename USE_SPLIT_PTLOCKS to USE_SPLIT_PTE_PTLOCKS 2013-11-15 09:32:14 +09:00
fault.c arch: mm: pass userspace fault flag to generic fault handler 2013-09-12 15:38:01 -07:00
fault.h
flush.c ARM: 8043/1: uprobes need icache flush after xol write 2014-05-25 23:48:45 +01:00
fsr-2level.c
fsr-3level.c
highmem.c ARM: 8031/2: change fixmap mapping region to support 32 CPUs 2014-04-23 11:09:42 +01:00
hugetlbpage.c hugetlb: restrict hugepage_migration_support() to x86_64 2014-06-04 16:53:51 -07:00
idmap.c ARM: idmap: add identity mapping usage note 2014-08-02 15:20:26 +01:00
init.c Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm into next 2014-06-05 15:57:04 -07:00
iomap.c
ioremap.c ARM: 8060/1: mm: allow sub-architectures to override PCI I/O memory type 2014-06-01 01:15:04 +01:00
Kconfig ARM: SoC platform changes for 3.17 2014-08-08 11:14:29 -07:00
l2c-common.c ARM: outer cache: add WARN_ON() to outer_disable() 2014-05-30 00:47:23 +01:00
l2c-l2x0-resume.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
Makefile ARM: l2c: provide common PL310 early resume code 2014-05-30 00:49:01 +01:00
mm.h ARM: provide common method to clear bits in CPU control register 2014-06-02 09:20:11 +01:00
mmap.c ARM: fix booting low-vectors machines 2013-11-30 14:45:31 +00:00
mmu.c ARM: add comments to the early page table remap code 2014-08-02 08:51:55 +01:00
nommu.c ARM: 8086/1: Set memblock limit for nommu 2014-06-29 10:29:34 +01:00
pabort-legacy.S
pabort-v6.S
pabort-v7.S
pgd.c ARM: pgd allocation: retry on failure 2013-12-29 12:36:20 +00:00
proc-arm7tdmi.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
proc-arm9tdmi.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
proc-arm720.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
proc-arm740.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
proc-arm920.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
proc-arm922.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
proc-arm925.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
proc-arm926.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
proc-arm940.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
proc-arm946.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
proc-arm1020.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
proc-arm1020e.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
proc-arm1022.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
proc-arm1026.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
proc-fa526.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
proc-feroceon.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
proc-macros.S ARM: 7954/1: mm: remove remaining domain support from ARMv6 2014-02-10 11:48:13 +00:00
proc-mohawk.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
proc-sa110.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
proc-sa1100.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
proc-syms.c
proc-v6.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
proc-v7-2level.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
proc-v7-3level.S ARM: 8114/1: LPAE: load upper bits of early TTBR0/TTBR1 2014-08-09 08:42:12 +01:00
proc-v7.S ARM: 8110/1: do CPU-specific init for Broadcom Brahma15 cores 2014-07-24 14:27:12 +01:00
proc-v7m.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
proc-xsc3.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
proc-xscale.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
tcm.h
tlb-fa.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
tlb-v4.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
tlb-v4wb.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
tlb-v4wbi.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
tlb-v6.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
tlb-v7.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00