forked from Minki/linux
16a12fa9ae
Pull input subsystem updates from Dmitry Torokhov: - a big update from Mauro converting input documentation to ReST format - Synaptics PS/2 is now aware of SMBus companion devices, which means that we can now use native RMI4 protocol to handle touchpads, instead of relying on legacy PS/2 mode. - we removed support from BMA180 accelerometer from input devices as it is now handled properly by IIO - update to TSC2007 to corretcly report pressure - other miscellaneous driver fixes. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (152 commits) Input: ar1021_i2c - use BIT to check for a bit Input: twl4030-pwrbutton - use input_set_capability() helper Input: twl4030-pwrbutton - use correct device for irq request Input: ar1021_i2c - enable touch mode during open Input: add uinput documentation dt-bindings: input: add bindings document for ar1021_i2c driver dt-bindings: input: rotary-encoder: fix typo Input: xen-kbdfront - add module parameter for setting resolution ARM: pxa/raumfeld: fix compile error in rotary controller resources Input: xpad - do not suggest writing to Dominic Input: xpad - don't use literal blocks inside footnotes Input: xpad - note that usb/devices is now at /sys/kernel/debug/ Input: docs - freshen up introduction Input: docs - split input docs into kernel- and user-facing Input: docs - note that MT-A protocol is obsolete Input: docs - update joystick documentation a bit Input: docs - remove disclaimer/GPL notice Input: fix "Game console" heading level in joystick documentation Input: rotary-encoder - remove references to platform data from docs Input: move documentation for Amiga CD32 ...
1239 lines
34 KiB
Plaintext
1239 lines
34 KiB
Plaintext
#
|
|
# Touchscreen driver configuration
|
|
#
|
|
menuconfig INPUT_TOUCHSCREEN
|
|
bool "Touchscreens"
|
|
help
|
|
Say Y here, and a list of supported touchscreens will be displayed.
|
|
This option doesn't affect the kernel.
|
|
|
|
If unsure, say Y.
|
|
|
|
if INPUT_TOUCHSCREEN
|
|
|
|
config TOUCHSCREEN_PROPERTIES
|
|
def_tristate INPUT
|
|
depends on INPUT
|
|
|
|
config TOUCHSCREEN_88PM860X
|
|
tristate "Marvell 88PM860x touchscreen"
|
|
depends on MFD_88PM860X
|
|
help
|
|
Say Y here if you have a 88PM860x PMIC and want to enable
|
|
support for the built-in touchscreen.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called 88pm860x-ts.
|
|
|
|
config TOUCHSCREEN_ADS7846
|
|
tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
|
|
depends on SPI_MASTER
|
|
depends on HWMON = n || HWMON
|
|
help
|
|
Say Y here if you have a touchscreen interface using the
|
|
ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
|
|
and your board-specific setup code includes that in its
|
|
table of SPI devices.
|
|
|
|
If HWMON is selected, and the driver is told the reference voltage
|
|
on your board, you will also get hwmon interfaces for the voltage
|
|
(and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
|
|
|
|
If unsure, say N (but it's safe to say "Y").
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ads7846.
|
|
|
|
config TOUCHSCREEN_AD7877
|
|
tristate "AD7877 based touchscreens"
|
|
depends on SPI_MASTER
|
|
help
|
|
Say Y here if you have a touchscreen interface using the
|
|
AD7877 controller, and your board-specific initialization
|
|
code includes that in its table of SPI devices.
|
|
|
|
If unsure, say N (but it's safe to say "Y").
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ad7877.
|
|
|
|
config TOUCHSCREEN_AD7879
|
|
tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
|
|
help
|
|
Say Y here if you want to support a touchscreen interface using
|
|
the AD7879-1/AD7889-1 controller.
|
|
|
|
You should select a bus connection too.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ad7879.
|
|
|
|
config TOUCHSCREEN_AD7879_I2C
|
|
tristate "support I2C bus connection"
|
|
depends on TOUCHSCREEN_AD7879 && I2C
|
|
select REGMAP_I2C
|
|
help
|
|
Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ad7879-i2c.
|
|
|
|
config TOUCHSCREEN_AD7879_SPI
|
|
tristate "support SPI bus connection"
|
|
depends on TOUCHSCREEN_AD7879 && SPI_MASTER
|
|
select REGMAP_SPI
|
|
help
|
|
Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
|
|
|
|
If unsure, say N (but it's safe to say "Y").
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ad7879-spi.
|
|
|
|
config TOUCHSCREEN_AR1021_I2C
|
|
tristate "Microchip AR1020/1021 i2c touchscreen"
|
|
depends on I2C && OF
|
|
help
|
|
Say Y here if you have the Microchip AR1020 or AR1021 touchscreen
|
|
controller chip in your system.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ar1021_i2c.
|
|
|
|
config TOUCHSCREEN_ATMEL_MXT
|
|
tristate "Atmel mXT I2C Touchscreen"
|
|
depends on I2C
|
|
select FW_LOADER
|
|
help
|
|
Say Y here if you have Atmel mXT series I2C touchscreen,
|
|
such as AT42QT602240/ATMXT224, connected to your system.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called atmel_mxt_ts.
|
|
|
|
config TOUCHSCREEN_ATMEL_MXT_T37
|
|
bool "Support T37 Diagnostic Data"
|
|
depends on TOUCHSCREEN_ATMEL_MXT
|
|
depends on VIDEO_V4L2=y || (TOUCHSCREEN_ATMEL_MXT=m && VIDEO_V4L2=m)
|
|
select VIDEOBUF2_VMALLOC
|
|
help
|
|
Say Y here if you want support to output data from the T37
|
|
Diagnostic Data object using a V4L device.
|
|
|
|
config TOUCHSCREEN_AUO_PIXCIR
|
|
tristate "AUO in-cell touchscreen using Pixcir ICs"
|
|
depends on I2C
|
|
depends on GPIOLIB || COMPILE_TEST
|
|
help
|
|
Say Y here if you have a AUO display with in-cell touchscreen
|
|
using Pixcir ICs.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called auo-pixcir-ts.
|
|
|
|
config TOUCHSCREEN_BU21013
|
|
tristate "BU21013 based touch panel controllers"
|
|
depends on I2C
|
|
help
|
|
Say Y here if you have a bu21013 touchscreen connected to
|
|
your system.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called bu21013_ts.
|
|
|
|
config TOUCHSCREEN_CHIPONE_ICN8318
|
|
tristate "chipone icn8318 touchscreen controller"
|
|
depends on GPIOLIB || COMPILE_TEST
|
|
depends on I2C
|
|
depends on OF
|
|
help
|
|
Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called chipone_icn8318.
|
|
|
|
config TOUCHSCREEN_CY8CTMG110
|
|
tristate "cy8ctmg110 touchscreen"
|
|
depends on I2C
|
|
depends on GPIOLIB || COMPILE_TEST
|
|
help
|
|
Say Y here if you have a cy8ctmg110 capacitive touchscreen on
|
|
an AAVA device.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called cy8ctmg110_ts.
|
|
|
|
config TOUCHSCREEN_CYTTSP_CORE
|
|
tristate "Cypress TTSP touchscreen"
|
|
help
|
|
Say Y here if you have a touchscreen using controller from
|
|
the Cypress TrueTouch(tm) Standard Product family connected
|
|
to your system. You will also need to select appropriate
|
|
bus connection below.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called cyttsp_core.
|
|
|
|
config TOUCHSCREEN_CYTTSP_I2C
|
|
tristate "support I2C bus connection"
|
|
depends on TOUCHSCREEN_CYTTSP_CORE && I2C
|
|
help
|
|
Say Y here if the touchscreen is connected via I2C bus.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called cyttsp_i2c.
|
|
|
|
config TOUCHSCREEN_CYTTSP_SPI
|
|
tristate "support SPI bus connection"
|
|
depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
|
|
help
|
|
Say Y here if the touchscreen is connected via SPI bus.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called cyttsp_spi.
|
|
|
|
config TOUCHSCREEN_CYTTSP4_CORE
|
|
tristate "Cypress TrueTouch Gen4 Touchscreen Driver"
|
|
help
|
|
Core driver for Cypress TrueTouch(tm) Standard Product
|
|
Generation4 touchscreen controllers.
|
|
|
|
Say Y here if you have a Cypress Gen4 touchscreen.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here.
|
|
|
|
config TOUCHSCREEN_CYTTSP4_I2C
|
|
tristate "support I2C bus connection"
|
|
depends on TOUCHSCREEN_CYTTSP4_CORE && I2C
|
|
help
|
|
Say Y here if the touchscreen is connected via I2C bus.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called cyttsp4_i2c.
|
|
|
|
config TOUCHSCREEN_CYTTSP4_SPI
|
|
tristate "support SPI bus connection"
|
|
depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER
|
|
help
|
|
Say Y here if the touchscreen is connected via SPI bus.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called cyttsp4_spi.
|
|
|
|
config TOUCHSCREEN_DA9034
|
|
tristate "Touchscreen support for Dialog Semiconductor DA9034"
|
|
depends on PMIC_DA903X
|
|
default y
|
|
help
|
|
Say Y here to enable the support for the touchscreen found
|
|
on Dialog Semiconductor DA9034 PMIC.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called da9034-ts.
|
|
|
|
config TOUCHSCREEN_DA9052
|
|
tristate "Dialog DA9052/DA9053 TSI"
|
|
depends on PMIC_DA9052
|
|
help
|
|
Say Y here to support the touchscreen found on Dialog Semiconductor
|
|
DA9052-BC and DA9053-AA/Bx PMICs.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called da9052_tsi.
|
|
|
|
config TOUCHSCREEN_DYNAPRO
|
|
tristate "Dynapro serial touchscreen"
|
|
select SERIO
|
|
help
|
|
Say Y here if you have a Dynapro serial touchscreen connected to
|
|
your system.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called dynapro.
|
|
|
|
config TOUCHSCREEN_HAMPSHIRE
|
|
tristate "Hampshire serial touchscreen"
|
|
select SERIO
|
|
help
|
|
Say Y here if you have a Hampshire serial touchscreen connected to
|
|
your system.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called hampshire.
|
|
|
|
config TOUCHSCREEN_EETI
|
|
tristate "EETI touchscreen panel support"
|
|
depends on I2C
|
|
help
|
|
Say Y here to enable support for I2C connected EETI touch panels.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called eeti_ts.
|
|
|
|
config TOUCHSCREEN_EGALAX
|
|
tristate "EETI eGalax multi-touch panel support"
|
|
depends on I2C && OF
|
|
help
|
|
Say Y here to enable support for I2C connected EETI
|
|
eGalax multi-touch panels.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called egalax_ts.
|
|
|
|
config TOUCHSCREEN_EGALAX_SERIAL
|
|
tristate "EETI eGalax serial touchscreen"
|
|
select SERIO
|
|
help
|
|
Say Y here to enable support for serial connected EETI
|
|
eGalax touch panels.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called egalax_ts_serial.
|
|
|
|
config TOUCHSCREEN_FUJITSU
|
|
tristate "Fujitsu serial touchscreen"
|
|
select SERIO
|
|
help
|
|
Say Y here if you have the Fujitsu touchscreen (such as one
|
|
installed in Lifebook P series laptop) connected to your
|
|
system.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called fujitsu-ts.
|
|
|
|
config TOUCHSCREEN_GOODIX
|
|
tristate "Goodix I2C touchscreen"
|
|
depends on I2C
|
|
depends on GPIOLIB || COMPILE_TEST
|
|
help
|
|
Say Y here if you have the Goodix touchscreen (such as one
|
|
installed in Onda v975w tablets) connected to your
|
|
system. It also supports 5-finger chip models, which can be
|
|
found on ARM tablets, like Wexler TAB7200 and MSI Primo73.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called goodix.
|
|
|
|
config TOUCHSCREEN_ILI210X
|
|
tristate "Ilitek ILI210X based touchscreen"
|
|
depends on I2C
|
|
help
|
|
Say Y here if you have a ILI210X based touchscreen
|
|
controller. This driver supports models ILI2102,
|
|
ILI2102s, ILI2103, ILI2103s and ILI2105.
|
|
Such kind of chipsets can be found in Amazon Kindle Fire
|
|
touchscreens.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ili210x.
|
|
|
|
config TOUCHSCREEN_IPROC
|
|
tristate "IPROC touch panel driver support"
|
|
depends on ARCH_BCM_IPROC || COMPILE_TEST
|
|
help
|
|
Say Y here if you want to add support for the IPROC touch
|
|
controller to your system.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called bcm_iproc_tsc.
|
|
|
|
config TOUCHSCREEN_S3C2410
|
|
tristate "Samsung S3C2410/generic touchscreen input driver"
|
|
depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
|
|
depends on S3C_ADC
|
|
help
|
|
Say Y here if you have the s3c2410 touchscreen.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called s3c2410_ts.
|
|
|
|
config TOUCHSCREEN_GUNZE
|
|
tristate "Gunze AHL-51S touchscreen"
|
|
select SERIO
|
|
help
|
|
Say Y here if you have the Gunze AHL-51 touchscreen connected to
|
|
your system.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called gunze.
|
|
|
|
config TOUCHSCREEN_EKTF2127
|
|
tristate "Elan eKTF2127 I2C touchscreen"
|
|
depends on I2C
|
|
help
|
|
Say Y here if you have an Elan eKTF2127 touchscreen
|
|
connected to your system.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ektf2127.
|
|
|
|
config TOUCHSCREEN_ELAN
|
|
tristate "Elan eKTH I2C touchscreen"
|
|
depends on I2C
|
|
help
|
|
Say Y here if you have an Elan eKTH I2C touchscreen
|
|
connected to your system.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called elants_i2c.
|
|
|
|
config TOUCHSCREEN_ELO
|
|
tristate "Elo serial touchscreens"
|
|
select SERIO
|
|
help
|
|
Say Y here if you have an Elo serial touchscreen connected to
|
|
your system.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called elo.
|
|
|
|
config TOUCHSCREEN_WACOM_W8001
|
|
tristate "Wacom W8001 penabled serial touchscreen"
|
|
select SERIO
|
|
help
|
|
Say Y here if you have an Wacom W8001 penabled serial touchscreen
|
|
connected to your system.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called wacom_w8001.
|
|
|
|
config TOUCHSCREEN_WACOM_I2C
|
|
tristate "Wacom Tablet support (I2C)"
|
|
depends on I2C
|
|
help
|
|
Say Y here if you want to use the I2C version of the Wacom
|
|
Pen Tablet.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called wacom_i2c.
|
|
|
|
config TOUCHSCREEN_LPC32XX
|
|
tristate "LPC32XX touchscreen controller"
|
|
depends on ARCH_LPC32XX
|
|
help
|
|
Say Y here if you have a LPC32XX device and want
|
|
to support the built-in touchscreen.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called lpc32xx_ts.
|
|
|
|
config TOUCHSCREEN_MAX11801
|
|
tristate "MAX11801 based touchscreens"
|
|
depends on I2C
|
|
help
|
|
Say Y here if you have a MAX11801 based touchscreen
|
|
controller.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called max11801_ts.
|
|
|
|
config TOUCHSCREEN_MCS5000
|
|
tristate "MELFAS MCS-5000 touchscreen"
|
|
depends on I2C
|
|
help
|
|
Say Y here if you have the MELFAS MCS-5000 touchscreen controller
|
|
chip in your system.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called mcs5000_ts.
|
|
|
|
config TOUCHSCREEN_MMS114
|
|
tristate "MELFAS MMS114 touchscreen"
|
|
depends on I2C
|
|
help
|
|
Say Y here if you have the MELFAS MMS114 touchscreen controller
|
|
chip in your system.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called mms114.
|
|
|
|
config TOUCHSCREEN_MELFAS_MIP4
|
|
tristate "MELFAS MIP4 Touchscreen"
|
|
depends on I2C
|
|
help
|
|
Say Y here if you have a MELFAS MIP4 Touchscreen device.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here:
|
|
the module will be called melfas_mip4.
|
|
|
|
config TOUCHSCREEN_MTOUCH
|
|
tristate "MicroTouch serial touchscreens"
|
|
select SERIO
|
|
help
|
|
Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
|
|
your system.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called mtouch.
|
|
|
|
config TOUCHSCREEN_IMX6UL_TSC
|
|
tristate "Freescale i.MX6UL touchscreen controller"
|
|
depends on (OF && GPIOLIB) || COMPILE_TEST
|
|
help
|
|
Say Y here if you have a Freescale i.MX6UL, and want to
|
|
use the internal touchscreen controller.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called imx6ul_tsc.
|
|
|
|
config TOUCHSCREEN_INEXIO
|
|
tristate "iNexio serial touchscreens"
|
|
select SERIO
|
|
help
|
|
Say Y here if you have an iNexio serial touchscreen connected to
|
|
your system.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called inexio.
|
|
|
|
config TOUCHSCREEN_MK712
|
|
tristate "ICS MicroClock MK712 touchscreen"
|
|
help
|
|
Say Y here if you have the ICS MicroClock MK712 touchscreen
|
|
controller chip in your system.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called mk712.
|
|
|
|
config TOUCHSCREEN_HP600
|
|
tristate "HP Jornada 6xx touchscreen"
|
|
depends on SH_HP6XX && SH_ADC
|
|
help
|
|
Say Y here if you have a HP Jornada 620/660/680/690 and want to
|
|
support the built-in touchscreen.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called hp680_ts_input.
|
|
|
|
config TOUCHSCREEN_HP7XX
|
|
tristate "HP Jornada 7xx touchscreen"
|
|
depends on SA1100_JORNADA720_SSP
|
|
help
|
|
Say Y here if you have a HP Jornada 710/720/728 and want
|
|
to support the built-in touchscreen.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called jornada720_ts.
|
|
|
|
config TOUCHSCREEN_IPAQ_MICRO
|
|
tristate "HP iPAQ Atmel Micro ASIC touchscreen"
|
|
depends on MFD_IPAQ_MICRO
|
|
help
|
|
Say Y here to enable support for the touchscreen attached to
|
|
the Atmel Micro peripheral controller on iPAQ h3100/h3600/h3700
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ipaq-micro-ts.
|
|
|
|
config TOUCHSCREEN_HTCPEN
|
|
tristate "HTC Shift X9500 touchscreen"
|
|
depends on ISA
|
|
help
|
|
Say Y here if you have an HTC Shift UMPC also known as HTC X9500
|
|
Clio / Shangrila and want to support the built-in touchscreen.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called htcpen.
|
|
|
|
config TOUCHSCREEN_PENMOUNT
|
|
tristate "Penmount serial touchscreen"
|
|
select SERIO
|
|
help
|
|
Say Y here if you have a Penmount serial touchscreen connected to
|
|
your system.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called penmount.
|
|
|
|
config TOUCHSCREEN_EDT_FT5X06
|
|
tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
|
|
depends on I2C
|
|
help
|
|
Say Y here if you have an EDT "Polytouch" touchscreen based
|
|
on the FocalTech FT5x06 family of controllers connected to
|
|
your system.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called edt-ft5x06.
|
|
|
|
config TOUCHSCREEN_MIGOR
|
|
tristate "Renesas MIGO-R touchscreen"
|
|
depends on (SH_MIGOR || COMPILE_TEST) && I2C
|
|
help
|
|
Say Y here to enable MIGO-R touchscreen support.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called migor_ts.
|
|
|
|
config TOUCHSCREEN_TOUCHRIGHT
|
|
tristate "Touchright serial touchscreen"
|
|
select SERIO
|
|
help
|
|
Say Y here if you have a Touchright serial touchscreen connected to
|
|
your system.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called touchright.
|
|
|
|
config TOUCHSCREEN_TOUCHWIN
|
|
tristate "Touchwin serial touchscreen"
|
|
select SERIO
|
|
help
|
|
Say Y here if you have a Touchwin serial touchscreen connected to
|
|
your system.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called touchwin.
|
|
|
|
config TOUCHSCREEN_TI_AM335X_TSC
|
|
tristate "TI Touchscreen Interface"
|
|
depends on MFD_TI_AM335X_TSCADC
|
|
help
|
|
Say Y here if you have 4/5/8 wire touchscreen controller
|
|
to be connected to the ADC controller on your TI AM335x SoC.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ti_am335x_tsc.
|
|
|
|
config TOUCHSCREEN_UCB1400
|
|
tristate "Philips UCB1400 touchscreen"
|
|
depends on AC97_BUS
|
|
depends on UCB1400_CORE
|
|
help
|
|
This enables support for the Philips UCB1400 touchscreen interface.
|
|
The UCB1400 is an AC97 audio codec. The touchscreen interface
|
|
will be initialized only after the ALSA subsystem has been
|
|
brought up and the UCB1400 detected. You therefore have to
|
|
configure ALSA support as well (either built-in or modular,
|
|
independently of whether this driver is itself built-in or
|
|
modular) for this driver to work.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ucb1400_ts.
|
|
|
|
config TOUCHSCREEN_PIXCIR
|
|
tristate "PIXCIR I2C touchscreens"
|
|
depends on I2C
|
|
help
|
|
Say Y here if you have a pixcir i2c touchscreen
|
|
controller.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called pixcir_i2c_ts.
|
|
|
|
config TOUCHSCREEN_WDT87XX_I2C
|
|
tristate "Weida HiTech I2C touchscreen"
|
|
depends on I2C
|
|
help
|
|
Say Y here if you have a Weida WDT87XX I2C touchscreen
|
|
connected to your system.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called wdt87xx_i2c.
|
|
|
|
config TOUCHSCREEN_WM831X
|
|
tristate "Support for WM831x touchscreen controllers"
|
|
depends on MFD_WM831X
|
|
help
|
|
This enables support for the touchscreen controller on the WM831x
|
|
series of PMICs.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called wm831x-ts.
|
|
|
|
config TOUCHSCREEN_WM97XX
|
|
tristate "Support for WM97xx AC97 touchscreen controllers"
|
|
depends on AC97_BUS
|
|
help
|
|
Say Y here if you have a Wolfson Microelectronics WM97xx
|
|
touchscreen connected to your system. Note that this option
|
|
only enables core driver, you will also need to select
|
|
support for appropriate chip below.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called wm97xx-ts.
|
|
|
|
config TOUCHSCREEN_WM9705
|
|
bool "WM9705 Touchscreen interface support"
|
|
depends on TOUCHSCREEN_WM97XX
|
|
default y
|
|
help
|
|
Say Y here to enable support for the Wolfson Microelectronics
|
|
WM9705 touchscreen controller.
|
|
|
|
config TOUCHSCREEN_WM9712
|
|
bool "WM9712 Touchscreen interface support"
|
|
depends on TOUCHSCREEN_WM97XX
|
|
default y
|
|
help
|
|
Say Y here to enable support for the Wolfson Microelectronics
|
|
WM9712 touchscreen controller.
|
|
|
|
config TOUCHSCREEN_WM9713
|
|
bool "WM9713 Touchscreen interface support"
|
|
depends on TOUCHSCREEN_WM97XX
|
|
default y
|
|
help
|
|
Say Y here to enable support for the Wolfson Microelectronics
|
|
WM9713 touchscreen controller.
|
|
|
|
config TOUCHSCREEN_WM97XX_ATMEL
|
|
tristate "WM97xx Atmel accelerated touch"
|
|
depends on TOUCHSCREEN_WM97XX && AVR32
|
|
help
|
|
Say Y here for support for streaming mode with WM97xx touchscreens
|
|
on Atmel AT91 or AVR32 systems with an AC97C module.
|
|
|
|
Be aware that this will use channel B in the controller for
|
|
streaming data, this must not conflict with other AC97C drivers.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the module will
|
|
be called atmel-wm97xx.
|
|
|
|
config TOUCHSCREEN_WM97XX_MAINSTONE
|
|
tristate "WM97xx Mainstone/Palm accelerated touch"
|
|
depends on TOUCHSCREEN_WM97XX && ARCH_PXA
|
|
help
|
|
Say Y here for support for streaming mode with WM97xx touchscreens
|
|
on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called mainstone-wm97xx.
|
|
|
|
config TOUCHSCREEN_WM97XX_ZYLONITE
|
|
tristate "Zylonite accelerated touch"
|
|
depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
|
|
select TOUCHSCREEN_WM9713
|
|
help
|
|
Say Y here for support for streaming mode with the touchscreen
|
|
on Zylonite systems.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called zylonite-wm97xx.
|
|
|
|
config TOUCHSCREEN_USB_COMPOSITE
|
|
tristate "USB Touchscreen Driver"
|
|
depends on USB_ARCH_HAS_HCD
|
|
select USB
|
|
help
|
|
USB Touchscreen driver for:
|
|
- eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
|
|
- PanJit TouchSet USB
|
|
- 3M MicroTouch USB (EX II series)
|
|
- ITM
|
|
- some other eTurboTouch
|
|
- Gunze AHL61
|
|
- DMC TSC-10/25
|
|
- IRTOUCHSYSTEMS/UNITOP
|
|
- IdealTEK URTC1000
|
|
- GoTop Super_Q2/GogoPen/PenPower tablets
|
|
- JASTEC USB Touch Controller/DigiTech DTR-02U
|
|
- Zytronic controllers
|
|
- Elo TouchSystems 2700 IntelliTouch
|
|
- EasyTouch USB Touch Controller from Data Modul
|
|
- e2i (Mimo monitors)
|
|
|
|
Have a look at <http://linux.chapter7.ch/touchkit/> for
|
|
a usage description and the required user-space stuff.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called usbtouchscreen.
|
|
|
|
config TOUCHSCREEN_MXS_LRADC
|
|
tristate "Freescale i.MX23/i.MX28 LRADC touchscreen"
|
|
depends on MFD_MXS_LRADC
|
|
help
|
|
Say Y here if you have a touchscreen connected to the low-resolution
|
|
analog-to-digital converter (LRADC) on an i.MX23 or i.MX28 processor.
|
|
|
|
To compile this driver as a module, choose M here: the module will be
|
|
called mxs-lradc-ts.
|
|
|
|
config TOUCHSCREEN_MX25
|
|
tristate "Freescale i.MX25 touchscreen input driver"
|
|
depends on MFD_MX25_TSADC
|
|
help
|
|
Enable support for touchscreen connected to your i.MX25.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called fsl-imx25-tcq.
|
|
|
|
config TOUCHSCREEN_MC13783
|
|
tristate "Freescale MC13783 touchscreen input driver"
|
|
depends on MFD_MC13XXX
|
|
help
|
|
Say Y here if you have an Freescale MC13783 PMIC on your
|
|
board and want to use its touchscreen
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called mc13783_ts.
|
|
|
|
config TOUCHSCREEN_USB_EGALAX
|
|
default y
|
|
bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
|
|
depends on TOUCHSCREEN_USB_COMPOSITE
|
|
|
|
config TOUCHSCREEN_USB_PANJIT
|
|
default y
|
|
bool "PanJit device support" if EXPERT
|
|
depends on TOUCHSCREEN_USB_COMPOSITE
|
|
|
|
config TOUCHSCREEN_USB_3M
|
|
default y
|
|
bool "3M/Microtouch EX II series device support" if EXPERT
|
|
depends on TOUCHSCREEN_USB_COMPOSITE
|
|
|
|
config TOUCHSCREEN_USB_ITM
|
|
default y
|
|
bool "ITM device support" if EXPERT
|
|
depends on TOUCHSCREEN_USB_COMPOSITE
|
|
|
|
config TOUCHSCREEN_USB_ETURBO
|
|
default y
|
|
bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
|
|
depends on TOUCHSCREEN_USB_COMPOSITE
|
|
|
|
config TOUCHSCREEN_USB_GUNZE
|
|
default y
|
|
bool "Gunze AHL61 device support" if EXPERT
|
|
depends on TOUCHSCREEN_USB_COMPOSITE
|
|
|
|
config TOUCHSCREEN_USB_DMC_TSC10
|
|
default y
|
|
bool "DMC TSC-10/25 device support" if EXPERT
|
|
depends on TOUCHSCREEN_USB_COMPOSITE
|
|
|
|
config TOUCHSCREEN_USB_IRTOUCH
|
|
default y
|
|
bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
|
|
depends on TOUCHSCREEN_USB_COMPOSITE
|
|
|
|
config TOUCHSCREEN_USB_IDEALTEK
|
|
default y
|
|
bool "IdealTEK URTC1000 device support" if EXPERT
|
|
depends on TOUCHSCREEN_USB_COMPOSITE
|
|
|
|
config TOUCHSCREEN_USB_GENERAL_TOUCH
|
|
default y
|
|
bool "GeneralTouch Touchscreen device support" if EXPERT
|
|
depends on TOUCHSCREEN_USB_COMPOSITE
|
|
|
|
config TOUCHSCREEN_USB_GOTOP
|
|
default y
|
|
bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
|
|
depends on TOUCHSCREEN_USB_COMPOSITE
|
|
|
|
config TOUCHSCREEN_USB_JASTEC
|
|
default y
|
|
bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
|
|
depends on TOUCHSCREEN_USB_COMPOSITE
|
|
|
|
config TOUCHSCREEN_USB_ELO
|
|
default y
|
|
bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
|
|
depends on TOUCHSCREEN_USB_COMPOSITE
|
|
|
|
config TOUCHSCREEN_USB_E2I
|
|
default y
|
|
bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
|
|
depends on TOUCHSCREEN_USB_COMPOSITE
|
|
|
|
config TOUCHSCREEN_USB_ZYTRONIC
|
|
default y
|
|
bool "Zytronic controller" if EXPERT
|
|
depends on TOUCHSCREEN_USB_COMPOSITE
|
|
|
|
config TOUCHSCREEN_USB_ETT_TC45USB
|
|
default y
|
|
bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
|
|
depends on TOUCHSCREEN_USB_COMPOSITE
|
|
|
|
config TOUCHSCREEN_USB_NEXIO
|
|
default y
|
|
bool "NEXIO/iNexio device support" if EXPERT
|
|
depends on TOUCHSCREEN_USB_COMPOSITE
|
|
|
|
config TOUCHSCREEN_USB_EASYTOUCH
|
|
default y
|
|
bool "EasyTouch USB Touch controller device support" if EMBEDDED
|
|
depends on TOUCHSCREEN_USB_COMPOSITE
|
|
help
|
|
Say Y here if you have an EasyTouch USB Touch controller.
|
|
If unsure, say N.
|
|
|
|
config TOUCHSCREEN_TOUCHIT213
|
|
tristate "Sahara TouchIT-213 touchscreen"
|
|
select SERIO
|
|
help
|
|
Say Y here if you have a Sahara TouchIT-213 Tablet PC.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called touchit213.
|
|
|
|
config TOUCHSCREEN_TS4800
|
|
tristate "TS-4800 touchscreen"
|
|
depends on HAS_IOMEM && OF
|
|
depends on SOC_IMX51 || COMPILE_TEST
|
|
select MFD_SYSCON
|
|
select INPUT_POLLDEV
|
|
help
|
|
Say Y here if you have a touchscreen on a TS-4800 board.
|
|
|
|
On TS-4800, the touchscreen is not handled directly by Linux but by
|
|
a companion FPGA.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ts4800_ts.
|
|
|
|
config TOUCHSCREEN_TSC_SERIO
|
|
tristate "TSC-10/25/40 serial touchscreen support"
|
|
select SERIO
|
|
help
|
|
Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
|
|
to your system.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tsc40.
|
|
|
|
config TOUCHSCREEN_TSC200X_CORE
|
|
tristate
|
|
|
|
config TOUCHSCREEN_TSC2004
|
|
tristate "TSC2004 based touchscreens"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
select TOUCHSCREEN_TSC200X_CORE
|
|
help
|
|
Say Y here if you have a TSC2004 based touchscreen.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tsc2004.
|
|
|
|
config TOUCHSCREEN_TSC2005
|
|
tristate "TSC2005 based touchscreens"
|
|
depends on SPI_MASTER
|
|
select REGMAP_SPI
|
|
select TOUCHSCREEN_TSC200X_CORE
|
|
help
|
|
Say Y here if you have a TSC2005 based touchscreen.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tsc2005.
|
|
|
|
config TOUCHSCREEN_TSC2007
|
|
tristate "TSC2007 based touchscreens"
|
|
depends on I2C
|
|
help
|
|
Say Y here if you have a TSC2007 based touchscreen.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tsc2007.
|
|
|
|
config TOUCHSCREEN_TSC2007_IIO
|
|
bool "IIO interface for external ADC input and temperature"
|
|
depends on TOUCHSCREEN_TSC2007
|
|
depends on IIO=y || IIO=TOUCHSCREEN_TSC2007
|
|
help
|
|
Saying Y here adds an iio interface to the tsc2007 which
|
|
provides values for the AUX input (used for e.g. battery
|
|
or ambient light monitoring), temperature and raw input
|
|
values.
|
|
|
|
config TOUCHSCREEN_W90X900
|
|
tristate "W90P910 touchscreen driver"
|
|
depends on ARCH_W90X900
|
|
help
|
|
Say Y here if you have a W90P910 based touchscreen.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called w90p910_ts.
|
|
|
|
config TOUCHSCREEN_PCAP
|
|
tristate "Motorola PCAP touchscreen"
|
|
depends on EZX_PCAP
|
|
help
|
|
Say Y here if you have a Motorola EZX telephone and
|
|
want to enable support for the built-in touchscreen.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called pcap_ts.
|
|
|
|
config TOUCHSCREEN_RM_TS
|
|
tristate "Raydium I2C Touchscreen"
|
|
depends on I2C
|
|
depends on GPIOLIB || COMPILE_TEST
|
|
help
|
|
Say Y here if you have Raydium series I2C touchscreen,
|
|
such as RM32380, connected to your system.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called raydium_i2c_ts.
|
|
|
|
config TOUCHSCREEN_SILEAD
|
|
tristate "Silead I2C touchscreen"
|
|
depends on I2C
|
|
help
|
|
Say Y here if you have the Silead touchscreen connected to
|
|
your system.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called silead.
|
|
|
|
config TOUCHSCREEN_SIS_I2C
|
|
tristate "SiS 9200 family I2C touchscreen"
|
|
depends on I2C
|
|
select CRC_ITU_T
|
|
depends on GPIOLIB || COMPILE_TEST
|
|
help
|
|
This enables support for SiS 9200 family over I2C based touchscreens.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called sis_i2c.
|
|
|
|
config TOUCHSCREEN_ST1232
|
|
tristate "Sitronix ST1232 touchscreen controllers"
|
|
depends on I2C
|
|
help
|
|
Say Y here if you want to support Sitronix ST1232
|
|
touchscreen controller.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called st1232_ts.
|
|
|
|
config TOUCHSCREEN_STMPE
|
|
tristate "STMicroelectronics STMPE touchscreens"
|
|
depends on MFD_STMPE
|
|
depends on (OF || COMPILE_TEST)
|
|
help
|
|
Say Y here if you want support for STMicroelectronics
|
|
STMPE touchscreen controllers.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called stmpe-ts.
|
|
|
|
config TOUCHSCREEN_SUN4I
|
|
tristate "Allwinner sun4i resistive touchscreen controller support"
|
|
depends on ARCH_SUNXI || COMPILE_TEST
|
|
depends on HWMON
|
|
depends on THERMAL || !THERMAL_OF
|
|
help
|
|
This selects support for the resistive touchscreen controller
|
|
found on Allwinner sunxi SoCs.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called sun4i-ts.
|
|
|
|
config TOUCHSCREEN_SUR40
|
|
tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
|
|
depends on USB && MEDIA_USB_SUPPORT && HAS_DMA
|
|
depends on VIDEO_V4L2
|
|
select INPUT_POLLDEV
|
|
select VIDEOBUF2_DMA_SG
|
|
help
|
|
Say Y here if you want support for the Samsung SUR40 touchscreen
|
|
(also known as Microsoft Surface 2.0 or Microsoft PixelSense).
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called sur40.
|
|
|
|
config TOUCHSCREEN_SURFACE3_SPI
|
|
tristate "Ntrig/Microsoft Surface 3 SPI touchscreen"
|
|
depends on SPI
|
|
depends on GPIOLIB || COMPILE_TEST
|
|
help
|
|
Say Y here if you have the Ntrig/Microsoft SPI touchscreen
|
|
controller chip as found on the Surface 3 in your system.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called surface3_spi.
|
|
|
|
config TOUCHSCREEN_SX8654
|
|
tristate "Semtech SX8654 touchscreen"
|
|
depends on I2C
|
|
help
|
|
Say Y here if you have a Semtech SX8654 touchscreen controller.
|
|
|
|
If unsure, say N
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called sx8654.
|
|
|
|
config TOUCHSCREEN_TPS6507X
|
|
tristate "TPS6507x based touchscreens"
|
|
depends on I2C
|
|
select INPUT_POLLDEV
|
|
help
|
|
Say Y here if you have a TPS6507x based touchscreen
|
|
controller.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called tps6507x_ts.
|
|
|
|
config TOUCHSCREEN_ZET6223
|
|
tristate "Zeitec ZET6223 touchscreen driver"
|
|
depends on I2C
|
|
help
|
|
Say Y here if you have a touchscreen using Zeitec ZET6223
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called zet6223.
|
|
|
|
config TOUCHSCREEN_ZFORCE
|
|
tristate "Neonode zForce infrared touchscreens"
|
|
depends on I2C
|
|
depends on GPIOLIB || COMPILE_TEST
|
|
help
|
|
Say Y here if you have a touchscreen using the zforce
|
|
infraread technology from Neonode.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called zforce_ts.
|
|
|
|
config TOUCHSCREEN_COLIBRI_VF50
|
|
tristate "Toradex Colibri on board touchscreen driver"
|
|
depends on IIO && VF610_ADC
|
|
depends on GPIOLIB || COMPILE_TEST
|
|
help
|
|
Say Y here if you have a Colibri VF50 and plan to use
|
|
the on-board provided 4-wire touchscreen driver.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called colibri_vf50_ts.
|
|
|
|
config TOUCHSCREEN_ROHM_BU21023
|
|
tristate "ROHM BU21023/24 Dual touch support resistive touchscreens"
|
|
depends on I2C
|
|
help
|
|
Say Y here if you have a touchscreen using ROHM BU21023/24.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called bu21023_ts.
|
|
|
|
endif
|