forked from Minki/linux
b0febde779
Now that we have a callback to check if bridge supports a given mode we can use it in Synopsys Designware HDMI bridge so that we restrict the number of probbed modes to the ones we can actually display. Also, there is no need to use mode_fixup() callback as mode_valid() will handle the mode validation. NOTE: I also had to change the pdata declaration of mode_valid custom callback so that the passed modes are const. I also changed in the platforms I found. Not even compiled it though. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Cc: Carlos Palminha <palminha@synopsys.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Archit Taneja <architt@codeaurora.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: David Airlie <airlied@linux.ie> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/3d8d449e4d13d2535fa292c75f5fa931de4a4fa8.1495720737.git.joabreu@synopsys.com
293 lines
7.1 KiB
C
293 lines
7.1 KiB
C
/* Copyright (C) 2011-2013 Freescale Semiconductor, Inc.
|
|
*
|
|
* derived from imx-hdmi.c(renamed to bridge/dw_hdmi.c now)
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/component.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
|
|
#include <drm/bridge/dw_hdmi.h>
|
|
#include <video/imx-ipu-v3.h>
|
|
#include <linux/regmap.h>
|
|
#include <drm/drm_of.h>
|
|
#include <drm/drmP.h>
|
|
#include <drm/drm_crtc_helper.h>
|
|
#include <drm/drm_edid.h>
|
|
#include <drm/drm_encoder_slave.h>
|
|
|
|
#include "imx-drm.h"
|
|
|
|
struct imx_hdmi {
|
|
struct device *dev;
|
|
struct drm_encoder encoder;
|
|
struct regmap *regmap;
|
|
};
|
|
|
|
static inline struct imx_hdmi *enc_to_imx_hdmi(struct drm_encoder *e)
|
|
{
|
|
return container_of(e, struct imx_hdmi, encoder);
|
|
}
|
|
|
|
static const struct dw_hdmi_mpll_config imx_mpll_cfg[] = {
|
|
{
|
|
45250000, {
|
|
{ 0x01e0, 0x0000 },
|
|
{ 0x21e1, 0x0000 },
|
|
{ 0x41e2, 0x0000 }
|
|
},
|
|
}, {
|
|
92500000, {
|
|
{ 0x0140, 0x0005 },
|
|
{ 0x2141, 0x0005 },
|
|
{ 0x4142, 0x0005 },
|
|
},
|
|
}, {
|
|
148500000, {
|
|
{ 0x00a0, 0x000a },
|
|
{ 0x20a1, 0x000a },
|
|
{ 0x40a2, 0x000a },
|
|
},
|
|
}, {
|
|
216000000, {
|
|
{ 0x00a0, 0x000a },
|
|
{ 0x2001, 0x000f },
|
|
{ 0x4002, 0x000f },
|
|
},
|
|
}, {
|
|
~0UL, {
|
|
{ 0x0000, 0x0000 },
|
|
{ 0x0000, 0x0000 },
|
|
{ 0x0000, 0x0000 },
|
|
},
|
|
}
|
|
};
|
|
|
|
static const struct dw_hdmi_curr_ctrl imx_cur_ctr[] = {
|
|
/* pixelclk bpp8 bpp10 bpp12 */
|
|
{
|
|
54000000, { 0x091c, 0x091c, 0x06dc },
|
|
}, {
|
|
58400000, { 0x091c, 0x06dc, 0x06dc },
|
|
}, {
|
|
72000000, { 0x06dc, 0x06dc, 0x091c },
|
|
}, {
|
|
74250000, { 0x06dc, 0x0b5c, 0x091c },
|
|
}, {
|
|
118800000, { 0x091c, 0x091c, 0x06dc },
|
|
}, {
|
|
216000000, { 0x06dc, 0x0b5c, 0x091c },
|
|
}, {
|
|
~0UL, { 0x0000, 0x0000, 0x0000 },
|
|
},
|
|
};
|
|
|
|
/*
|
|
* Resistance term 133Ohm Cfg
|
|
* PREEMP config 0.00
|
|
* TX/CK level 10
|
|
*/
|
|
static const struct dw_hdmi_phy_config imx_phy_config[] = {
|
|
/*pixelclk symbol term vlev */
|
|
{ 216000000, 0x800d, 0x0005, 0x01ad},
|
|
{ ~0UL, 0x0000, 0x0000, 0x0000}
|
|
};
|
|
|
|
static int dw_hdmi_imx_parse_dt(struct imx_hdmi *hdmi)
|
|
{
|
|
struct device_node *np = hdmi->dev->of_node;
|
|
|
|
hdmi->regmap = syscon_regmap_lookup_by_phandle(np, "gpr");
|
|
if (IS_ERR(hdmi->regmap)) {
|
|
dev_err(hdmi->dev, "Unable to get gpr\n");
|
|
return PTR_ERR(hdmi->regmap);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dw_hdmi_imx_encoder_disable(struct drm_encoder *encoder)
|
|
{
|
|
}
|
|
|
|
static void dw_hdmi_imx_encoder_enable(struct drm_encoder *encoder)
|
|
{
|
|
struct imx_hdmi *hdmi = enc_to_imx_hdmi(encoder);
|
|
int mux = drm_of_encoder_active_port_id(hdmi->dev->of_node, encoder);
|
|
|
|
regmap_update_bits(hdmi->regmap, IOMUXC_GPR3,
|
|
IMX6Q_GPR3_HDMI_MUX_CTL_MASK,
|
|
mux << IMX6Q_GPR3_HDMI_MUX_CTL_SHIFT);
|
|
}
|
|
|
|
static int dw_hdmi_imx_atomic_check(struct drm_encoder *encoder,
|
|
struct drm_crtc_state *crtc_state,
|
|
struct drm_connector_state *conn_state)
|
|
{
|
|
struct imx_crtc_state *imx_crtc_state = to_imx_crtc_state(crtc_state);
|
|
|
|
imx_crtc_state->bus_format = MEDIA_BUS_FMT_RGB888_1X24;
|
|
imx_crtc_state->di_hsync_pin = 2;
|
|
imx_crtc_state->di_vsync_pin = 3;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct drm_encoder_helper_funcs dw_hdmi_imx_encoder_helper_funcs = {
|
|
.enable = dw_hdmi_imx_encoder_enable,
|
|
.disable = dw_hdmi_imx_encoder_disable,
|
|
.atomic_check = dw_hdmi_imx_atomic_check,
|
|
};
|
|
|
|
static const struct drm_encoder_funcs dw_hdmi_imx_encoder_funcs = {
|
|
.destroy = drm_encoder_cleanup,
|
|
};
|
|
|
|
static enum drm_mode_status
|
|
imx6q_hdmi_mode_valid(struct drm_connector *con,
|
|
const struct drm_display_mode *mode)
|
|
{
|
|
if (mode->clock < 13500)
|
|
return MODE_CLOCK_LOW;
|
|
/* FIXME: Hardware is capable of 266MHz, but setup data is missing. */
|
|
if (mode->clock > 216000)
|
|
return MODE_CLOCK_HIGH;
|
|
|
|
return MODE_OK;
|
|
}
|
|
|
|
static enum drm_mode_status
|
|
imx6dl_hdmi_mode_valid(struct drm_connector *con,
|
|
const struct drm_display_mode *mode)
|
|
{
|
|
if (mode->clock < 13500)
|
|
return MODE_CLOCK_LOW;
|
|
/* FIXME: Hardware is capable of 270MHz, but setup data is missing. */
|
|
if (mode->clock > 216000)
|
|
return MODE_CLOCK_HIGH;
|
|
|
|
return MODE_OK;
|
|
}
|
|
|
|
static struct dw_hdmi_plat_data imx6q_hdmi_drv_data = {
|
|
.mpll_cfg = imx_mpll_cfg,
|
|
.cur_ctr = imx_cur_ctr,
|
|
.phy_config = imx_phy_config,
|
|
.mode_valid = imx6q_hdmi_mode_valid,
|
|
};
|
|
|
|
static struct dw_hdmi_plat_data imx6dl_hdmi_drv_data = {
|
|
.mpll_cfg = imx_mpll_cfg,
|
|
.cur_ctr = imx_cur_ctr,
|
|
.phy_config = imx_phy_config,
|
|
.mode_valid = imx6dl_hdmi_mode_valid,
|
|
};
|
|
|
|
static const struct of_device_id dw_hdmi_imx_dt_ids[] = {
|
|
{ .compatible = "fsl,imx6q-hdmi",
|
|
.data = &imx6q_hdmi_drv_data
|
|
}, {
|
|
.compatible = "fsl,imx6dl-hdmi",
|
|
.data = &imx6dl_hdmi_drv_data
|
|
},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, dw_hdmi_imx_dt_ids);
|
|
|
|
static int dw_hdmi_imx_bind(struct device *dev, struct device *master,
|
|
void *data)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
const struct dw_hdmi_plat_data *plat_data;
|
|
const struct of_device_id *match;
|
|
struct drm_device *drm = data;
|
|
struct drm_encoder *encoder;
|
|
struct imx_hdmi *hdmi;
|
|
int ret;
|
|
|
|
if (!pdev->dev.of_node)
|
|
return -ENODEV;
|
|
|
|
hdmi = devm_kzalloc(&pdev->dev, sizeof(*hdmi), GFP_KERNEL);
|
|
if (!hdmi)
|
|
return -ENOMEM;
|
|
|
|
match = of_match_node(dw_hdmi_imx_dt_ids, pdev->dev.of_node);
|
|
plat_data = match->data;
|
|
hdmi->dev = &pdev->dev;
|
|
encoder = &hdmi->encoder;
|
|
|
|
encoder->possible_crtcs = drm_of_find_possible_crtcs(drm, dev->of_node);
|
|
/*
|
|
* If we failed to find the CRTC(s) which this encoder is
|
|
* supposed to be connected to, it's because the CRTC has
|
|
* not been registered yet. Defer probing, and hope that
|
|
* the required CRTC is added later.
|
|
*/
|
|
if (encoder->possible_crtcs == 0)
|
|
return -EPROBE_DEFER;
|
|
|
|
ret = dw_hdmi_imx_parse_dt(hdmi);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
drm_encoder_helper_add(encoder, &dw_hdmi_imx_encoder_helper_funcs);
|
|
drm_encoder_init(drm, encoder, &dw_hdmi_imx_encoder_funcs,
|
|
DRM_MODE_ENCODER_TMDS, NULL);
|
|
|
|
ret = dw_hdmi_bind(pdev, encoder, plat_data);
|
|
|
|
/*
|
|
* If dw_hdmi_bind() fails we'll never call dw_hdmi_unbind(),
|
|
* which would have called the encoder cleanup. Do it manually.
|
|
*/
|
|
if (ret)
|
|
drm_encoder_cleanup(encoder);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void dw_hdmi_imx_unbind(struct device *dev, struct device *master,
|
|
void *data)
|
|
{
|
|
return dw_hdmi_unbind(dev);
|
|
}
|
|
|
|
static const struct component_ops dw_hdmi_imx_ops = {
|
|
.bind = dw_hdmi_imx_bind,
|
|
.unbind = dw_hdmi_imx_unbind,
|
|
};
|
|
|
|
static int dw_hdmi_imx_probe(struct platform_device *pdev)
|
|
{
|
|
return component_add(&pdev->dev, &dw_hdmi_imx_ops);
|
|
}
|
|
|
|
static int dw_hdmi_imx_remove(struct platform_device *pdev)
|
|
{
|
|
component_del(&pdev->dev, &dw_hdmi_imx_ops);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver dw_hdmi_imx_platform_driver = {
|
|
.probe = dw_hdmi_imx_probe,
|
|
.remove = dw_hdmi_imx_remove,
|
|
.driver = {
|
|
.name = "dwhdmi-imx",
|
|
.of_match_table = dw_hdmi_imx_dt_ids,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(dw_hdmi_imx_platform_driver);
|
|
|
|
MODULE_AUTHOR("Andy Yan <andy.yan@rock-chips.com>");
|
|
MODULE_AUTHOR("Yakir Yang <ykk@rock-chips.com>");
|
|
MODULE_DESCRIPTION("IMX6 Specific DW-HDMI Driver Extension");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:dwhdmi-imx");
|