leandrof/linux
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
30af77c4c8
linux/drivers/gpu/drm/i915/intel_sprite.c
Paulo Zanoni e35fef211b drm/i915: change dev_priv->fbc.plane to dev_priv->fbc.crtc 
Since the mapping from CRTCs to planes is fixed, looking at the CRTC
is essentially the same as looking at the plane. Also, the next
patches wil start using the frontbuffer_bits macros, and they take the
pipe as the parameter instead of the plane, and this could differ on
gens 2 and 3.

Another nice thing is that we don't risk accidentally initializing
things to PLANE_A if we don't set the value before it is used for the
first time. But this shouldn't be a problem with the current code.

V2: Rebase.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (v1)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:15 +01:00

1541 lines
43 KiB
C
Raw Blame History

/*
* Copyright © 2011 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
* Authors:
* Jesse Barnes <jbarnes@virtuousgeek.org>
*
* New plane/sprite handling.
*
* The older chips had a separate interface for programming plane related
* registers; newer ones are much simpler and we can use the new DRM plane
* support.
*/
#include <drm/drmP.h>
#include <drm/drm_crtc.h>
#include <drm/drm_fourcc.h>
#include <drm/drm_rect.h>
#include <drm/drm_plane_helper.h>
#include "intel_drv.h"
#include <drm/i915_drm.h>
#include "i915_drv.h"
static bool
format_is_yuv(uint32_t format)
{
switch (format) {
case DRM_FORMAT_YUYV:
case DRM_FORMAT_UYVY:
case DRM_FORMAT_VYUY:
case DRM_FORMAT_YVYU:
return true;
default:
return false;
}
}
static int usecs_to_scanlines(const struct drm_display_mode *mode, int usecs)
{
/* paranoia */
if (!mode->crtc_htotal)
return 1;
return DIV_ROUND_UP(usecs * mode->crtc_clock, 1000 * mode->crtc_htotal);
}
/**
* intel_pipe_update_start() - start update of a set of display registers
* @crtc: the crtc of which the registers are going to be updated
* @start_vbl_count: vblank counter return pointer used for error checking
*
* Mark the start of an update to pipe registers that should be updated
* atomically regarding vblank. If the next vblank will happens within
* the next 100 us, this function waits until the vblank passes.
*
* After a successful call to this function, interrupts will be disabled
* until a subsequent call to intel_pipe_update_end(). That is done to
* avoid random delays. The value written to @start_vbl_count should be
* supplied to intel_pipe_update_end() for error checking.
*
* Return: true if the call was successful
*/
bool intel_pipe_update_start(struct intel_crtc *crtc, uint32_t *start_vbl_count)
{
struct drm_device *dev = crtc->base.dev;
const struct drm_display_mode *mode = &crtc->config->base.adjusted_mode;
enum pipe pipe = crtc->pipe;
long timeout = msecs_to_jiffies_timeout(1);
int scanline, min, max, vblank_start;
wait_queue_head_t *wq = drm_crtc_vblank_waitqueue(&crtc->base);
DEFINE_WAIT(wait);
vblank_start = mode->crtc_vblank_start;
if (mode->flags & DRM_MODE_FLAG_INTERLACE)
vblank_start = DIV_ROUND_UP(vblank_start, 2);
/* FIXME needs to be calibrated sensibly */
min = vblank_start - usecs_to_scanlines(mode, 100);
max = vblank_start - 1;
if (min <= 0 || max <= 0)
return false;
if (WARN_ON(drm_vblank_get(dev, pipe)))
return false;
local_irq_disable();
trace_i915_pipe_update_start(crtc, min, max);
for (;;) {
/*
* prepare_to_wait() has a memory barrier, which guarantees
* other CPUs can see the task state update by the time we
* read the scanline.
*/
prepare_to_wait(wq, &wait, TASK_UNINTERRUPTIBLE);
scanline = intel_get_crtc_scanline(crtc);
if (scanline < min || scanline > max)
break;
if (timeout <= 0) {
DRM_ERROR("Potential atomic update failure on pipe %c\n",
pipe_name(crtc->pipe));
break;
}
local_irq_enable();
timeout = schedule_timeout(timeout);
local_irq_disable();
}
finish_wait(wq, &wait);
drm_vblank_put(dev, pipe);
*start_vbl_count = dev->driver->get_vblank_counter(dev, pipe);
trace_i915_pipe_update_vblank_evaded(crtc, min, max, *start_vbl_count);
return true;
}
/**
* intel_pipe_update_end() - end update of a set of display registers
* @crtc: the crtc of which the registers were updated
* @start_vbl_count: start vblank counter (used for error checking)
*
* Mark the end of an update started with intel_pipe_update_start(). This
* re-enables interrupts and verifies the update was actually completed
* before a vblank using the value of @start_vbl_count.
*/
void intel_pipe_update_end(struct intel_crtc *crtc, u32 start_vbl_count)
{
struct drm_device *dev = crtc->base.dev;
enum pipe pipe = crtc->pipe;
u32 end_vbl_count = dev->driver->get_vblank_counter(dev, pipe);
trace_i915_pipe_update_end(crtc, end_vbl_count);
local_irq_enable();
if (start_vbl_count != end_vbl_count)
DRM_ERROR("Atomic update failure on pipe %c (start=%u end=%u)\n",
pipe_name(pipe), start_vbl_count, end_vbl_count);
}
static void intel_update_primary_plane(struct intel_crtc *crtc)
{
struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
int reg = DSPCNTR(crtc->plane);
if (crtc->primary_enabled)
I915_WRITE(reg, I915_READ(reg) | DISPLAY_PLANE_ENABLE);
else
I915_WRITE(reg, I915_READ(reg) & ~DISPLAY_PLANE_ENABLE);
}
static void
skl_update_plane(struct drm_plane *drm_plane, struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_i915_gem_object *obj, int crtc_x, int crtc_y,
unsigned int crtc_w, unsigned int crtc_h,
uint32_t x, uint32_t y,
uint32_t src_w, uint32_t src_h)
{
struct drm_device *dev = drm_plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(drm_plane);
const int pipe = intel_plane->pipe;
const int plane = intel_plane->plane + 1;
u32 plane_ctl, stride;
int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
plane_ctl = I915_READ(PLANE_CTL(pipe, plane));
/* Mask out pixel format bits in case we change it */
plane_ctl &= ~PLANE_CTL_FORMAT_MASK;
plane_ctl &= ~PLANE_CTL_ORDER_RGBX;
plane_ctl &= ~PLANE_CTL_YUV422_ORDER_MASK;
plane_ctl &= ~PLANE_CTL_TILED_MASK;
plane_ctl &= ~PLANE_CTL_ALPHA_MASK;
plane_ctl &= ~PLANE_CTL_ROTATE_MASK;
/* Trickle feed has to be enabled */
plane_ctl &= ~PLANE_CTL_TRICKLE_FEED_DISABLE;
switch (fb->pixel_format) {
case DRM_FORMAT_RGB565:
plane_ctl |= PLANE_CTL_FORMAT_RGB_565;
break;
case DRM_FORMAT_XBGR8888:
plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888 | PLANE_CTL_ORDER_RGBX;
break;
case DRM_FORMAT_XRGB8888:
plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888;
break;
/*
* XXX: For ARBG/ABGR formats we default to expecting scanout buffers
* to be already pre-multiplied. We need to add a knob (or a different
* DRM_FORMAT) for user-space to configure that.
*/
case DRM_FORMAT_ABGR8888:
plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888 |
PLANE_CTL_ORDER_RGBX |
PLANE_CTL_ALPHA_SW_PREMULTIPLY;
break;
case DRM_FORMAT_ARGB8888:
plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888 |
PLANE_CTL_ALPHA_SW_PREMULTIPLY;
break;
case DRM_FORMAT_YUYV:
plane_ctl |= PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_YUYV;
break;
case DRM_FORMAT_YVYU:
plane_ctl |= PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_YVYU;
break;
case DRM_FORMAT_UYVY:
plane_ctl |= PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_UYVY;
break;
case DRM_FORMAT_VYUY:
plane_ctl |= PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_VYUY;
break;
default:
BUG();
}
switch (obj->tiling_mode) {
case I915_TILING_NONE:
stride = fb->pitches[0] >> 6;
break;
case I915_TILING_X:
plane_ctl |= PLANE_CTL_TILED_X;
stride = fb->pitches[0] >> 9;
break;
default:
BUG();
}
if (drm_plane->state->rotation == BIT(DRM_ROTATE_180))
plane_ctl |= PLANE_CTL_ROTATE_180;
plane_ctl |= PLANE_CTL_ENABLE;
plane_ctl |= PLANE_CTL_PIPE_CSC_ENABLE;
intel_update_sprite_watermarks(drm_plane, crtc, src_w, src_h,
pixel_size, true,
src_w != crtc_w || src_h != crtc_h);
/* Sizes are 0 based */
src_w--;
src_h--;
crtc_w--;
crtc_h--;
I915_WRITE(PLANE_OFFSET(pipe, plane), (y << 16) | x);
I915_WRITE(PLANE_STRIDE(pipe, plane), stride);
I915_WRITE(PLANE_POS(pipe, plane), (crtc_y << 16) | crtc_x);
I915_WRITE(PLANE_SIZE(pipe, plane), (crtc_h << 16) | crtc_w);
I915_WRITE(PLANE_CTL(pipe, plane), plane_ctl);
I915_WRITE(PLANE_SURF(pipe, plane), i915_gem_obj_ggtt_offset(obj));
POSTING_READ(PLANE_SURF(pipe, plane));
}
static void
skl_disable_plane(struct drm_plane *drm_plane, struct drm_crtc *crtc)
{
struct drm_device *dev = drm_plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(drm_plane);
const int pipe = intel_plane->pipe;
const int plane = intel_plane->plane + 1;
I915_WRITE(PLANE_CTL(pipe, plane),
I915_READ(PLANE_CTL(pipe, plane)) & ~PLANE_CTL_ENABLE);
/* Activate double buffered register update */
I915_WRITE(PLANE_CTL(pipe, plane), 0);
POSTING_READ(PLANE_CTL(pipe, plane));
intel_update_sprite_watermarks(drm_plane, crtc, 0, 0, 0, false, false);
}
static int
skl_update_colorkey(struct drm_plane *drm_plane,
struct drm_intel_sprite_colorkey *key)
{
struct drm_device *dev = drm_plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(drm_plane);
const int pipe = intel_plane->pipe;
const int plane = intel_plane->plane;
u32 plane_ctl;
I915_WRITE(PLANE_KEYVAL(pipe, plane), key->min_value);
I915_WRITE(PLANE_KEYMAX(pipe, plane), key->max_value);
I915_WRITE(PLANE_KEYMSK(pipe, plane), key->channel_mask);
plane_ctl = I915_READ(PLANE_CTL(pipe, plane));
plane_ctl &= ~PLANE_CTL_KEY_ENABLE_MASK;
if (key->flags & I915_SET_COLORKEY_DESTINATION)
plane_ctl |= PLANE_CTL_KEY_ENABLE_DESTINATION;
else if (key->flags & I915_SET_COLORKEY_SOURCE)
plane_ctl |= PLANE_CTL_KEY_ENABLE_SOURCE;
I915_WRITE(PLANE_CTL(pipe, plane), plane_ctl);
POSTING_READ(PLANE_CTL(pipe, plane));
return 0;
}
static void
skl_get_colorkey(struct drm_plane *drm_plane,
struct drm_intel_sprite_colorkey *key)
{
struct drm_device *dev = drm_plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(drm_plane);
const int pipe = intel_plane->pipe;
const int plane = intel_plane->plane;
u32 plane_ctl;
key->min_value = I915_READ(PLANE_KEYVAL(pipe, plane));
key->max_value = I915_READ(PLANE_KEYMAX(pipe, plane));
key->channel_mask = I915_READ(PLANE_KEYMSK(pipe, plane));
plane_ctl = I915_READ(PLANE_CTL(pipe, plane));
switch (plane_ctl & PLANE_CTL_KEY_ENABLE_MASK) {
case PLANE_CTL_KEY_ENABLE_DESTINATION:
key->flags = I915_SET_COLORKEY_DESTINATION;
break;
case PLANE_CTL_KEY_ENABLE_SOURCE:
key->flags = I915_SET_COLORKEY_SOURCE;
break;
default:
key->flags = I915_SET_COLORKEY_NONE;
}
}
static void
chv_update_csc(struct intel_plane *intel_plane, uint32_t format)
{
struct drm_i915_private *dev_priv = intel_plane->base.dev->dev_private;
int plane = intel_plane->plane;
/* Seems RGB data bypasses the CSC always */
if (!format_is_yuv(format))
return;
/*
* BT.601 limited range YCbCr -> full range RGB
*
* |r| | 6537 4769 0| |cr |
* |g| = |-3330 4769 -1605| x |y-64|
* |b| | 0 4769 8263| |cb |
*
* Cb and Cr apparently come in as signed already, so no
* need for any offset. For Y we need to remove the offset.
*/
I915_WRITE(SPCSCYGOFF(plane), SPCSC_OOFF(0) | SPCSC_IOFF(-64));
I915_WRITE(SPCSCCBOFF(plane), SPCSC_OOFF(0) | SPCSC_IOFF(0));
I915_WRITE(SPCSCCROFF(plane), SPCSC_OOFF(0) | SPCSC_IOFF(0));
I915_WRITE(SPCSCC01(plane), SPCSC_C1(4769) | SPCSC_C0(6537));
I915_WRITE(SPCSCC23(plane), SPCSC_C1(-3330) | SPCSC_C0(0));
I915_WRITE(SPCSCC45(plane), SPCSC_C1(-1605) | SPCSC_C0(4769));
I915_WRITE(SPCSCC67(plane), SPCSC_C1(4769) | SPCSC_C0(0));
I915_WRITE(SPCSCC8(plane), SPCSC_C0(8263));
I915_WRITE(SPCSCYGICLAMP(plane), SPCSC_IMAX(940) | SPCSC_IMIN(64));
I915_WRITE(SPCSCCBICLAMP(plane), SPCSC_IMAX(448) | SPCSC_IMIN(-448));
I915_WRITE(SPCSCCRICLAMP(plane), SPCSC_IMAX(448) | SPCSC_IMIN(-448));
I915_WRITE(SPCSCYGOCLAMP(plane), SPCSC_OMAX(1023) | SPCSC_OMIN(0));
I915_WRITE(SPCSCCBOCLAMP(plane), SPCSC_OMAX(1023) | SPCSC_OMIN(0));
I915_WRITE(SPCSCCROCLAMP(plane), SPCSC_OMAX(1023) | SPCSC_OMIN(0));
}
static void
vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_i915_gem_object *obj, int crtc_x, int crtc_y,
unsigned int crtc_w, unsigned int crtc_h,
uint32_t x, uint32_t y,
uint32_t src_w, uint32_t src_h)
{
struct drm_device *dev = dplane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(dplane);
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_plane->pipe;
int plane = intel_plane->plane;
u32 sprctl;
unsigned long sprsurf_offset, linear_offset;
int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
sprctl = I915_READ(SPCNTR(pipe, plane));
/* Mask out pixel format bits in case we change it */
sprctl &= ~SP_PIXFORMAT_MASK;
sprctl &= ~SP_YUV_BYTE_ORDER_MASK;
sprctl &= ~SP_TILED;
sprctl &= ~SP_ROTATE_180;
switch (fb->pixel_format) {
case DRM_FORMAT_YUYV:
sprctl |= SP_FORMAT_YUV422 | SP_YUV_ORDER_YUYV;
break;
case DRM_FORMAT_YVYU:
sprctl |= SP_FORMAT_YUV422 | SP_YUV_ORDER_YVYU;
break;
case DRM_FORMAT_UYVY:
sprctl |= SP_FORMAT_YUV422 | SP_YUV_ORDER_UYVY;
break;
case DRM_FORMAT_VYUY:
sprctl |= SP_FORMAT_YUV422 | SP_YUV_ORDER_VYUY;
break;
case DRM_FORMAT_RGB565:
sprctl |= SP_FORMAT_BGR565;
break;
case DRM_FORMAT_XRGB8888:
sprctl |= SP_FORMAT_BGRX8888;
break;
case DRM_FORMAT_ARGB8888:
sprctl |= SP_FORMAT_BGRA8888;
break;
case DRM_FORMAT_XBGR2101010:
sprctl |= SP_FORMAT_RGBX1010102;
break;
case DRM_FORMAT_ABGR2101010:
sprctl |= SP_FORMAT_RGBA1010102;
break;
case DRM_FORMAT_XBGR8888:
sprctl |= SP_FORMAT_RGBX8888;
break;
case DRM_FORMAT_ABGR8888:
sprctl |= SP_FORMAT_RGBA8888;
break;
default:
/*
* If we get here one of the upper layers failed to filter
* out the unsupported plane formats
*/
BUG();
break;
}
/*
* Enable gamma to match primary/cursor plane behaviour.
* FIXME should be user controllable via propertiesa.
*/
sprctl |= SP_GAMMA_ENABLE;
if (obj->tiling_mode != I915_TILING_NONE)
sprctl |= SP_TILED;
sprctl |= SP_ENABLE;
intel_update_sprite_watermarks(dplane, crtc, src_w, src_h,
pixel_size, true,
src_w != crtc_w || src_h != crtc_h);
/* Sizes are 0 based */
src_w--;
src_h--;
crtc_w--;
crtc_h--;
linear_offset = y * fb->pitches[0] + x * pixel_size;
sprsurf_offset = intel_gen4_compute_page_offset(&x, &y,
obj->tiling_mode,
pixel_size,
fb->pitches[0]);
linear_offset -= sprsurf_offset;
if (dplane->state->rotation == BIT(DRM_ROTATE_180)) {
sprctl |= SP_ROTATE_180;
x += src_w;
y += src_h;
linear_offset += src_h * fb->pitches[0] + src_w * pixel_size;
}
intel_update_primary_plane(intel_crtc);
if (IS_CHERRYVIEW(dev) && pipe == PIPE_B)
chv_update_csc(intel_plane, fb->pixel_format);
I915_WRITE(SPSTRIDE(pipe, plane), fb->pitches[0]);
I915_WRITE(SPPOS(pipe, plane), (crtc_y << 16) | crtc_x);
if (obj->tiling_mode != I915_TILING_NONE)
I915_WRITE(SPTILEOFF(pipe, plane), (y << 16) | x);
else
I915_WRITE(SPLINOFF(pipe, plane), linear_offset);
I915_WRITE(SPCONSTALPHA(pipe, plane), 0);
I915_WRITE(SPSIZE(pipe, plane), (crtc_h << 16) | crtc_w);
I915_WRITE(SPCNTR(pipe, plane), sprctl);
I915_WRITE(SPSURF(pipe, plane), i915_gem_obj_ggtt_offset(obj) +
sprsurf_offset);
intel_flush_primary_plane(dev_priv, intel_crtc->plane);
}
static void
vlv_disable_plane(struct drm_plane *dplane, struct drm_crtc *crtc)
{
struct drm_device *dev = dplane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(dplane);
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_plane->pipe;
int plane = intel_plane->plane;
intel_update_primary_plane(intel_crtc);
I915_WRITE(SPCNTR(pipe, plane), I915_READ(SPCNTR(pipe, plane)) &
~SP_ENABLE);
/* Activate double buffered register update */
I915_WRITE(SPSURF(pipe, plane), 0);
intel_flush_primary_plane(dev_priv, intel_crtc->plane);
intel_update_sprite_watermarks(dplane, crtc, 0, 0, 0, false, false);
}
static int
vlv_update_colorkey(struct drm_plane *dplane,
struct drm_intel_sprite_colorkey *key)
{
struct drm_device *dev = dplane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(dplane);
int pipe = intel_plane->pipe;
int plane = intel_plane->plane;
u32 sprctl;
if (key->flags & I915_SET_COLORKEY_DESTINATION)
return -EINVAL;
I915_WRITE(SPKEYMINVAL(pipe, plane), key->min_value);
I915_WRITE(SPKEYMAXVAL(pipe, plane), key->max_value);
I915_WRITE(SPKEYMSK(pipe, plane), key->channel_mask);
sprctl = I915_READ(SPCNTR(pipe, plane));
sprctl &= ~SP_SOURCE_KEY;
if (key->flags & I915_SET_COLORKEY_SOURCE)
sprctl |= SP_SOURCE_KEY;
I915_WRITE(SPCNTR(pipe, plane), sprctl);
POSTING_READ(SPKEYMSK(pipe, plane));
return 0;
}
static void
vlv_get_colorkey(struct drm_plane *dplane,
struct drm_intel_sprite_colorkey *key)
{
struct drm_device *dev = dplane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(dplane);
int pipe = intel_plane->pipe;
int plane = intel_plane->plane;
u32 sprctl;
key->min_value = I915_READ(SPKEYMINVAL(pipe, plane));
key->max_value = I915_READ(SPKEYMAXVAL(pipe, plane));
key->channel_mask = I915_READ(SPKEYMSK(pipe, plane));
sprctl = I915_READ(SPCNTR(pipe, plane));
if (sprctl & SP_SOURCE_KEY)
key->flags = I915_SET_COLORKEY_SOURCE;
else
key->flags = I915_SET_COLORKEY_NONE;
}
static void
ivb_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_i915_gem_object *obj, int crtc_x, int crtc_y,
unsigned int crtc_w, unsigned int crtc_h,
uint32_t x, uint32_t y,
uint32_t src_w, uint32_t src_h)
{
struct drm_device *dev = plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(plane);
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_plane->pipe;
u32 sprctl, sprscale = 0;
unsigned long sprsurf_offset, linear_offset;
int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
sprctl = I915_READ(SPRCTL(pipe));
/* Mask out pixel format bits in case we change it */
sprctl &= ~SPRITE_PIXFORMAT_MASK;
sprctl &= ~SPRITE_RGB_ORDER_RGBX;
sprctl &= ~SPRITE_YUV_BYTE_ORDER_MASK;
sprctl &= ~SPRITE_TILED;
sprctl &= ~SPRITE_ROTATE_180;
switch (fb->pixel_format) {
case DRM_FORMAT_XBGR8888:
sprctl |= SPRITE_FORMAT_RGBX888 | SPRITE_RGB_ORDER_RGBX;
break;
case DRM_FORMAT_XRGB8888:
sprctl |= SPRITE_FORMAT_RGBX888;
break;
case DRM_FORMAT_YUYV:
sprctl |= SPRITE_FORMAT_YUV422 | SPRITE_YUV_ORDER_YUYV;
break;
case DRM_FORMAT_YVYU:
sprctl |= SPRITE_FORMAT_YUV422 | SPRITE_YUV_ORDER_YVYU;
break;
case DRM_FORMAT_UYVY:
sprctl |= SPRITE_FORMAT_YUV422 | SPRITE_YUV_ORDER_UYVY;
break;
case DRM_FORMAT_VYUY:
sprctl |= SPRITE_FORMAT_YUV422 | SPRITE_YUV_ORDER_VYUY;
break;
default:
BUG();
}
/*
* Enable gamma to match primary/cursor plane behaviour.
* FIXME should be user controllable via propertiesa.
*/
sprctl |= SPRITE_GAMMA_ENABLE;
if (obj->tiling_mode != I915_TILING_NONE)
sprctl |= SPRITE_TILED;
if (IS_HASWELL(dev) || IS_BROADWELL(dev))
sprctl &= ~SPRITE_TRICKLE_FEED_DISABLE;
else
sprctl |= SPRITE_TRICKLE_FEED_DISABLE;
sprctl |= SPRITE_ENABLE;
if (IS_HASWELL(dev) || IS_BROADWELL(dev))
sprctl |= SPRITE_PIPE_CSC_ENABLE;
intel_update_sprite_watermarks(plane, crtc, src_w, src_h, pixel_size,
true,
src_w != crtc_w || src_h != crtc_h);
/* Sizes are 0 based */
src_w--;
src_h--;
crtc_w--;
crtc_h--;
if (crtc_w != src_w || crtc_h != src_h)
sprscale = SPRITE_SCALE_ENABLE | (src_w << 16) | src_h;
linear_offset = y * fb->pitches[0] + x * pixel_size;
sprsurf_offset =
intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode,
pixel_size, fb->pitches[0]);
linear_offset -= sprsurf_offset;
if (plane->state->rotation == BIT(DRM_ROTATE_180)) {
sprctl |= SPRITE_ROTATE_180;
/* HSW and BDW does this automagically in hardware */
if (!IS_HASWELL(dev) && !IS_BROADWELL(dev)) {
x += src_w;
y += src_h;
linear_offset += src_h * fb->pitches[0] +
src_w * pixel_size;
}
}
intel_update_primary_plane(intel_crtc);
I915_WRITE(SPRSTRIDE(pipe), fb->pitches[0]);
I915_WRITE(SPRPOS(pipe), (crtc_y << 16) | crtc_x);
/* HSW consolidates SPRTILEOFF and SPRLINOFF into a single SPROFFSET
* register */
if (IS_HASWELL(dev) || IS_BROADWELL(dev))
I915_WRITE(SPROFFSET(pipe), (y << 16) | x);
else if (obj->tiling_mode != I915_TILING_NONE)
I915_WRITE(SPRTILEOFF(pipe), (y << 16) | x);
else
I915_WRITE(SPRLINOFF(pipe), linear_offset);
I915_WRITE(SPRSIZE(pipe), (crtc_h << 16) | crtc_w);
if (intel_plane->can_scale)
I915_WRITE(SPRSCALE(pipe), sprscale);
I915_WRITE(SPRCTL(pipe), sprctl);
I915_WRITE(SPRSURF(pipe),
i915_gem_obj_ggtt_offset(obj) + sprsurf_offset);
intel_flush_primary_plane(dev_priv, intel_crtc->plane);
}
static void
ivb_disable_plane(struct drm_plane *plane, struct drm_crtc *crtc)
{
struct drm_device *dev = plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(plane);
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_plane->pipe;
intel_update_primary_plane(intel_crtc);
I915_WRITE(SPRCTL(pipe), I915_READ(SPRCTL(pipe)) & ~SPRITE_ENABLE);
/* Can't leave the scaler enabled... */
if (intel_plane->can_scale)
I915_WRITE(SPRSCALE(pipe), 0);
/* Activate double buffered register update */
I915_WRITE(SPRSURF(pipe), 0);
intel_flush_primary_plane(dev_priv, intel_crtc->plane);
/*
* Avoid underruns when disabling the sprite.
* FIXME remove once watermark updates are done properly.
*/
intel_crtc->atomic.wait_vblank = true;
intel_crtc->atomic.update_sprite_watermarks |= (1 << drm_plane_index(plane));
}
static int
ivb_update_colorkey(struct drm_plane *plane,
struct drm_intel_sprite_colorkey *key)
{
struct drm_device *dev = plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane;
u32 sprctl;
int ret = 0;
intel_plane = to_intel_plane(plane);
I915_WRITE(SPRKEYVAL(intel_plane->pipe), key->min_value);
I915_WRITE(SPRKEYMAX(intel_plane->pipe), key->max_value);
I915_WRITE(SPRKEYMSK(intel_plane->pipe), key->channel_mask);
sprctl = I915_READ(SPRCTL(intel_plane->pipe));
sprctl &= ~(SPRITE_SOURCE_KEY | SPRITE_DEST_KEY);
if (key->flags & I915_SET_COLORKEY_DESTINATION)
sprctl |= SPRITE_DEST_KEY;
else if (key->flags & I915_SET_COLORKEY_SOURCE)
sprctl |= SPRITE_SOURCE_KEY;
I915_WRITE(SPRCTL(intel_plane->pipe), sprctl);
POSTING_READ(SPRKEYMSK(intel_plane->pipe));
return ret;
}
static void
ivb_get_colorkey(struct drm_plane *plane, struct drm_intel_sprite_colorkey *key)
{
struct drm_device *dev = plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane;
u32 sprctl;
intel_plane = to_intel_plane(plane);
key->min_value = I915_READ(SPRKEYVAL(intel_plane->pipe));
key->max_value = I915_READ(SPRKEYMAX(intel_plane->pipe));
key->channel_mask = I915_READ(SPRKEYMSK(intel_plane->pipe));
key->flags = 0;
sprctl = I915_READ(SPRCTL(intel_plane->pipe));
if (sprctl & SPRITE_DEST_KEY)
key->flags = I915_SET_COLORKEY_DESTINATION;
else if (sprctl & SPRITE_SOURCE_KEY)
key->flags = I915_SET_COLORKEY_SOURCE;
else
key->flags = I915_SET_COLORKEY_NONE;
}
static void
ilk_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_i915_gem_object *obj, int crtc_x, int crtc_y,
unsigned int crtc_w, unsigned int crtc_h,
uint32_t x, uint32_t y,
uint32_t src_w, uint32_t src_h)
{
struct drm_device *dev = plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(plane);
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_plane->pipe;
unsigned long dvssurf_offset, linear_offset;
u32 dvscntr, dvsscale;
int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
dvscntr = I915_READ(DVSCNTR(pipe));
/* Mask out pixel format bits in case we change it */
dvscntr &= ~DVS_PIXFORMAT_MASK;
dvscntr &= ~DVS_RGB_ORDER_XBGR;
dvscntr &= ~DVS_YUV_BYTE_ORDER_MASK;
dvscntr &= ~DVS_TILED;
dvscntr &= ~DVS_ROTATE_180;
switch (fb->pixel_format) {
case DRM_FORMAT_XBGR8888:
dvscntr |= DVS_FORMAT_RGBX888 | DVS_RGB_ORDER_XBGR;
break;
case DRM_FORMAT_XRGB8888:
dvscntr |= DVS_FORMAT_RGBX888;
break;
case DRM_FORMAT_YUYV:
dvscntr |= DVS_FORMAT_YUV422 | DVS_YUV_ORDER_YUYV;
break;
case DRM_FORMAT_YVYU:
dvscntr |= DVS_FORMAT_YUV422 | DVS_YUV_ORDER_YVYU;
break;
case DRM_FORMAT_UYVY:
dvscntr |= DVS_FORMAT_YUV422 | DVS_YUV_ORDER_UYVY;
break;
case DRM_FORMAT_VYUY:
dvscntr |= DVS_FORMAT_YUV422 | DVS_YUV_ORDER_VYUY;
break;
default:
BUG();
}
/*
* Enable gamma to match primary/cursor plane behaviour.
* FIXME should be user controllable via propertiesa.
*/
dvscntr |= DVS_GAMMA_ENABLE;
if (obj->tiling_mode != I915_TILING_NONE)
dvscntr |= DVS_TILED;
if (IS_GEN6(dev))
dvscntr |= DVS_TRICKLE_FEED_DISABLE; /* must disable */
dvscntr |= DVS_ENABLE;
intel_update_sprite_watermarks(plane, crtc, src_w, src_h,
pixel_size, true,
src_w != crtc_w || src_h != crtc_h);
/* Sizes are 0 based */
src_w--;
src_h--;
crtc_w--;
crtc_h--;
dvsscale = 0;
if (crtc_w != src_w || crtc_h != src_h)
dvsscale = DVS_SCALE_ENABLE | (src_w << 16) | src_h;
linear_offset = y * fb->pitches[0] + x * pixel_size;
dvssurf_offset =
intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode,
pixel_size, fb->pitches[0]);
linear_offset -= dvssurf_offset;
if (plane->state->rotation == BIT(DRM_ROTATE_180)) {
dvscntr |= DVS_ROTATE_180;
x += src_w;
y += src_h;
linear_offset += src_h * fb->pitches[0] + src_w * pixel_size;
}
intel_update_primary_plane(intel_crtc);
I915_WRITE(DVSSTRIDE(pipe), fb->pitches[0]);
I915_WRITE(DVSPOS(pipe), (crtc_y << 16) | crtc_x);
if (obj->tiling_mode != I915_TILING_NONE)
I915_WRITE(DVSTILEOFF(pipe), (y << 16) | x);
else
I915_WRITE(DVSLINOFF(pipe), linear_offset);
I915_WRITE(DVSSIZE(pipe), (crtc_h << 16) | crtc_w);
I915_WRITE(DVSSCALE(pipe), dvsscale);
I915_WRITE(DVSCNTR(pipe), dvscntr);
I915_WRITE(DVSSURF(pipe),
i915_gem_obj_ggtt_offset(obj) + dvssurf_offset);
intel_flush_primary_plane(dev_priv, intel_crtc->plane);
}
static void
ilk_disable_plane(struct drm_plane *plane, struct drm_crtc *crtc)
{
struct drm_device *dev = plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(plane);
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_plane->pipe;
intel_update_primary_plane(intel_crtc);
I915_WRITE(DVSCNTR(pipe), I915_READ(DVSCNTR(pipe)) & ~DVS_ENABLE);
/* Disable the scaler */
I915_WRITE(DVSSCALE(pipe), 0);
/* Flush double buffered register updates */
I915_WRITE(DVSSURF(pipe), 0);
intel_flush_primary_plane(dev_priv, intel_crtc->plane);
/*
* Avoid underruns when disabling the sprite.
* FIXME remove once watermark updates are done properly.
*/
intel_crtc->atomic.wait_vblank = true;
intel_crtc->atomic.update_sprite_watermarks |= (1 << drm_plane_index(plane));
}
/**
* intel_post_enable_primary - Perform operations after enabling primary plane
* @crtc: the CRTC whose primary plane was just enabled
*
* Performs potentially sleeping operations that must be done after the primary
* plane is enabled, such as updating FBC and IPS. Note that this may be
* called due to an explicit primary plane update, or due to an implicit
* re-enable that is caused when a sprite plane is updated to no longer
* completely hide the primary plane.
*/
void
intel_post_enable_primary(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
/*
* BDW signals flip done immediately if the plane
* is disabled, even if the plane enable is already
* armed to occur at the next vblank :(
*/
if (IS_BROADWELL(dev))
intel_wait_for_vblank(dev, intel_crtc->pipe);
/*
* FIXME IPS should be fine as long as one plane is
* enabled, but in practice it seems to have problems
* when going from primary only to sprite only and vice
* versa.
*/
hsw_enable_ips(intel_crtc);
mutex_lock(&dev->struct_mutex);
intel_fbc_update(dev);
mutex_unlock(&dev->struct_mutex);
}
/**
* intel_pre_disable_primary - Perform operations before disabling primary plane
* @crtc: the CRTC whose primary plane is to be disabled
*
* Performs potentially sleeping operations that must be done before the
* primary plane is enabled, such as updating FBC and IPS. Note that this may
* be called due to an explicit primary plane update, or due to an implicit
* disable that is caused when a sprite plane completely hides the primary
* plane.
*/
void
intel_pre_disable_primary(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
mutex_lock(&dev->struct_mutex);
if (dev_priv->fbc.crtc == intel_crtc)
intel_fbc_disable(dev);
mutex_unlock(&dev->struct_mutex);
/*
* FIXME IPS should be fine as long as one plane is
* enabled, but in practice it seems to have problems
* when going from primary only to sprite only and vice
* versa.
*/
hsw_disable_ips(intel_crtc);
}
static int
ilk_update_colorkey(struct drm_plane *plane,
struct drm_intel_sprite_colorkey *key)
{
struct drm_device *dev = plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane;
u32 dvscntr;
int ret = 0;
intel_plane = to_intel_plane(plane);
I915_WRITE(DVSKEYVAL(intel_plane->pipe), key->min_value);
I915_WRITE(DVSKEYMAX(intel_plane->pipe), key->max_value);
I915_WRITE(DVSKEYMSK(intel_plane->pipe), key->channel_mask);
dvscntr = I915_READ(DVSCNTR(intel_plane->pipe));
dvscntr &= ~(DVS_SOURCE_KEY | DVS_DEST_KEY);
if (key->flags & I915_SET_COLORKEY_DESTINATION)
dvscntr |= DVS_DEST_KEY;
else if (key->flags & I915_SET_COLORKEY_SOURCE)
dvscntr |= DVS_SOURCE_KEY;
I915_WRITE(DVSCNTR(intel_plane->pipe), dvscntr);
POSTING_READ(DVSKEYMSK(intel_plane->pipe));
return ret;
}
static void
ilk_get_colorkey(struct drm_plane *plane, struct drm_intel_sprite_colorkey *key)
{
struct drm_device *dev = plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane;
u32 dvscntr;
intel_plane = to_intel_plane(plane);
key->min_value = I915_READ(DVSKEYVAL(intel_plane->pipe));
key->max_value = I915_READ(DVSKEYMAX(intel_plane->pipe));
key->channel_mask = I915_READ(DVSKEYMSK(intel_plane->pipe));
key->flags = 0;
dvscntr = I915_READ(DVSCNTR(intel_plane->pipe));
if (dvscntr & DVS_DEST_KEY)
key->flags = I915_SET_COLORKEY_DESTINATION;
else if (dvscntr & DVS_SOURCE_KEY)
key->flags = I915_SET_COLORKEY_SOURCE;
else
key->flags = I915_SET_COLORKEY_NONE;
}
static bool colorkey_enabled(struct intel_plane *intel_plane)
{
struct drm_intel_sprite_colorkey key;
intel_plane->get_colorkey(&intel_plane->base, &key);
return key.flags != I915_SET_COLORKEY_NONE;
}
static int
intel_check_sprite_plane(struct drm_plane *plane,
struct intel_plane_state *state)
{
struct intel_crtc *intel_crtc = to_intel_crtc(state->base.crtc);
struct intel_plane *intel_plane = to_intel_plane(plane);
struct drm_framebuffer *fb = state->base.fb;
struct drm_i915_gem_object *obj = intel_fb_obj(fb);
int crtc_x, crtc_y;
unsigned int crtc_w, crtc_h;
uint32_t src_x, src_y, src_w, src_h;
struct drm_rect *src = &state->src;
struct drm_rect *dst = &state->dst;
const struct drm_rect *clip = &state->clip;
int hscale, vscale;
int max_scale, min_scale;
int pixel_size;
intel_crtc = intel_crtc ? intel_crtc : to_intel_crtc(plane->crtc);
if (!fb) {
state->visible = false;
goto finish;
}
/* Don't modify another pipe's plane */
if (intel_plane->pipe != intel_crtc->pipe) {
DRM_DEBUG_KMS("Wrong plane <-> crtc mapping\n");
return -EINVAL;
}
/* FIXME check all gen limits */
if (fb->width < 3 || fb->height < 3 || fb->pitches[0] > 16384) {
DRM_DEBUG_KMS("Unsuitable framebuffer for plane\n");
return -EINVAL;
}
/* Sprite planes can be linear or x-tiled surfaces */
switch (obj->tiling_mode) {
case I915_TILING_NONE:
case I915_TILING_X:
break;
default:
DRM_DEBUG_KMS("Unsupported tiling mode\n");
return -EINVAL;
}
/*
* FIXME the following code does a bunch of fuzzy adjustments to the
* coordinates and sizes. We probably need some way to decide whether
* more strict checking should be done instead.
*/
max_scale = intel_plane->max_downscale << 16;
min_scale = intel_plane->can_scale ? 1 : (1 << 16);
drm_rect_rotate(src, fb->width << 16, fb->height << 16,
state->base.rotation);
hscale = drm_rect_calc_hscale_relaxed(src, dst, min_scale, max_scale);
BUG_ON(hscale < 0);
vscale = drm_rect_calc_vscale_relaxed(src, dst, min_scale, max_scale);
BUG_ON(vscale < 0);
state->visible = drm_rect_clip_scaled(src, dst, clip, hscale, vscale);
crtc_x = dst->x1;
crtc_y = dst->y1;
crtc_w = drm_rect_width(dst);
crtc_h = drm_rect_height(dst);
if (state->visible) {
/* check again in case clipping clamped the results */
hscale = drm_rect_calc_hscale(src, dst, min_scale, max_scale);
if (hscale < 0) {
DRM_DEBUG_KMS("Horizontal scaling factor out of limits\n");
drm_rect_debug_print(src, true);
drm_rect_debug_print(dst, false);
return hscale;
}
vscale = drm_rect_calc_vscale(src, dst, min_scale, max_scale);
if (vscale < 0) {
DRM_DEBUG_KMS("Vertical scaling factor out of limits\n");
drm_rect_debug_print(src, true);
drm_rect_debug_print(dst, false);
return vscale;
}
/* Make the source viewport size an exact multiple of the scaling factors. */
drm_rect_adjust_size(src,
drm_rect_width(dst) * hscale - drm_rect_width(src),
drm_rect_height(dst) * vscale - drm_rect_height(src));
drm_rect_rotate_inv(src, fb->width << 16, fb->height << 16,
state->base.rotation);
/* sanity check to make sure the src viewport wasn't enlarged */
WARN_ON(src->x1 < (int) state->base.src_x ||
src->y1 < (int) state->base.src_y ||
src->x2 > (int) state->base.src_x + state->base.src_w ||
src->y2 > (int) state->base.src_y + state->base.src_h);
/*
* Hardware doesn't handle subpixel coordinates.
* Adjust to (macro)pixel boundary, but be careful not to
* increase the source viewport size, because that could
* push the downscaling factor out of bounds.
*/
src_x = src->x1 >> 16;
src_w = drm_rect_width(src) >> 16;
src_y = src->y1 >> 16;
src_h = drm_rect_height(src) >> 16;
if (format_is_yuv(fb->pixel_format)) {
src_x &= ~1;
src_w &= ~1;
/*
* Must keep src and dst the
* same if we can't scale.
*/
if (!intel_plane->can_scale)
crtc_w &= ~1;
if (crtc_w == 0)
state->visible = false;
}
}
/* Check size restrictions when scaling */
if (state->visible && (src_w != crtc_w || src_h != crtc_h)) {
unsigned int width_bytes;
WARN_ON(!intel_plane->can_scale);
/* FIXME interlacing min height is 6 */
if (crtc_w < 3 || crtc_h < 3)
state->visible = false;
if (src_w < 3 || src_h < 3)
state->visible = false;
pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
width_bytes = ((src_x * pixel_size) & 63) +
src_w * pixel_size;
if (src_w > 2048 || src_h > 2048 ||
width_bytes > 4096 || fb->pitches[0] > 4096) {
DRM_DEBUG_KMS("Source dimensions exceed hardware limits\n");
return -EINVAL;
}
}
if (state->visible) {
src->x1 = src_x;
src->x2 = src_x + src_w;
src->y1 = src_y;
src->y2 = src_y + src_h;
}
dst->x1 = crtc_x;
dst->x2 = crtc_x + crtc_w;
dst->y1 = crtc_y;
dst->y2 = crtc_y + crtc_h;
finish:
/*
* If the sprite is completely covering the primary plane,
* we can disable the primary and save power.
*/
state->hides_primary = fb != NULL && drm_rect_equals(dst, clip) &&
!colorkey_enabled(intel_plane);
WARN_ON(state->hides_primary && !state->visible && intel_crtc->active);
if (intel_crtc->active) {
if (intel_crtc->primary_enabled == state->hides_primary)
intel_crtc->atomic.wait_for_flips = true;
if (intel_crtc->primary_enabled && state->hides_primary)
intel_crtc->atomic.pre_disable_primary = true;
intel_crtc->atomic.fb_bits |=
INTEL_FRONTBUFFER_SPRITE(intel_crtc->pipe);
if (!intel_crtc->primary_enabled && !state->hides_primary)
intel_crtc->atomic.post_enable_primary = true;
}
return 0;
}
static void
intel_commit_sprite_plane(struct drm_plane *plane,
struct intel_plane_state *state)
{
struct drm_crtc *crtc = state->base.crtc;
struct intel_crtc *intel_crtc;
struct intel_plane *intel_plane = to_intel_plane(plane);
struct drm_framebuffer *fb = state->base.fb;
struct drm_i915_gem_object *obj = intel_fb_obj(fb);
int crtc_x, crtc_y;
unsigned int crtc_w, crtc_h;
uint32_t src_x, src_y, src_w, src_h;
crtc = crtc ? crtc : plane->crtc;
intel_crtc = to_intel_crtc(crtc);
plane->fb = state->base.fb;
intel_plane->obj = obj;
if (intel_crtc->active) {
intel_crtc->primary_enabled = !state->hides_primary;
if (state->visible) {
crtc_x = state->dst.x1;
crtc_y = state->dst.y1;
crtc_w = drm_rect_width(&state->dst);
crtc_h = drm_rect_height(&state->dst);
src_x = state->src.x1;
src_y = state->src.y1;
src_w = drm_rect_width(&state->src);
src_h = drm_rect_height(&state->src);
intel_plane->update_plane(plane, crtc, fb, obj,
crtc_x, crtc_y, crtc_w, crtc_h,
src_x, src_y, src_w, src_h);
} else {
intel_plane->disable_plane(plane, crtc);
}
}
}
int intel_sprite_set_colorkey(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_intel_sprite_colorkey *set = data;
struct drm_plane *plane;
struct intel_plane *intel_plane;
int ret = 0;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -ENODEV;
/* Make sure we don't try to enable both src & dest simultaneously */
if ((set->flags & (I915_SET_COLORKEY_DESTINATION | I915_SET_COLORKEY_SOURCE)) == (I915_SET_COLORKEY_DESTINATION | I915_SET_COLORKEY_SOURCE))
return -EINVAL;
drm_modeset_lock_all(dev);
plane = drm_plane_find(dev, set->plane_id);
if (!plane) {
ret = -ENOENT;
goto out_unlock;
}
intel_plane = to_intel_plane(plane);
ret = intel_plane->update_colorkey(plane, set);
out_unlock:
drm_modeset_unlock_all(dev);
return ret;
}
int intel_sprite_get_colorkey(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_intel_sprite_colorkey *get = data;
struct drm_plane *plane;
struct intel_plane *intel_plane;
int ret = 0;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -ENODEV;
drm_modeset_lock_all(dev);
plane = drm_plane_find(dev, get->plane_id);
if (!plane) {
ret = -ENOENT;
goto out_unlock;
}
intel_plane = to_intel_plane(plane);
intel_plane->get_colorkey(plane, get);
out_unlock:
drm_modeset_unlock_all(dev);
return ret;
}
int intel_plane_restore(struct drm_plane *plane)
{
if (!plane->crtc || !plane->fb)
return 0;
return plane->funcs->update_plane(plane, plane->crtc, plane->fb,
plane->state->crtc_x, plane->state->crtc_y,
plane->state->crtc_w, plane->state->crtc_h,
plane->state->src_x, plane->state->src_y,
plane->state->src_w, plane->state->src_h);
}
static uint32_t ilk_plane_formats[] = {
DRM_FORMAT_XRGB8888,
DRM_FORMAT_YUYV,
DRM_FORMAT_YVYU,
DRM_FORMAT_UYVY,
DRM_FORMAT_VYUY,
};
static uint32_t snb_plane_formats[] = {
DRM_FORMAT_XBGR8888,
DRM_FORMAT_XRGB8888,
DRM_FORMAT_YUYV,
DRM_FORMAT_YVYU,
DRM_FORMAT_UYVY,
DRM_FORMAT_VYUY,
};
static uint32_t vlv_plane_formats[] = {
DRM_FORMAT_RGB565,
DRM_FORMAT_ABGR8888,
DRM_FORMAT_ARGB8888,
DRM_FORMAT_XBGR8888,
DRM_FORMAT_XRGB8888,
DRM_FORMAT_XBGR2101010,
DRM_FORMAT_ABGR2101010,
DRM_FORMAT_YUYV,
DRM_FORMAT_YVYU,
DRM_FORMAT_UYVY,
DRM_FORMAT_VYUY,
};
static uint32_t skl_plane_formats[] = {
DRM_FORMAT_RGB565,
DRM_FORMAT_ABGR8888,
DRM_FORMAT_ARGB8888,
DRM_FORMAT_XBGR8888,
DRM_FORMAT_XRGB8888,
DRM_FORMAT_YUYV,
DRM_FORMAT_YVYU,
DRM_FORMAT_UYVY,
DRM_FORMAT_VYUY,
};
int
intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
{
struct intel_plane *intel_plane;
struct intel_plane_state *state;
unsigned long possible_crtcs;
const uint32_t *plane_formats;
int num_plane_formats;
int ret;
if (INTEL_INFO(dev)->gen < 5)
return -ENODEV;
intel_plane = kzalloc(sizeof(*intel_plane), GFP_KERNEL);
if (!intel_plane)
return -ENOMEM;
state = intel_create_plane_state(&intel_plane->base);
if (!state) {
kfree(intel_plane);
return -ENOMEM;
}
intel_plane->base.state = &state->base;
switch (INTEL_INFO(dev)->gen) {
case 5:
case 6:
intel_plane->can_scale = true;
intel_plane->max_downscale = 16;
intel_plane->update_plane = ilk_update_plane;
intel_plane->disable_plane = ilk_disable_plane;
intel_plane->update_colorkey = ilk_update_colorkey;
intel_plane->get_colorkey = ilk_get_colorkey;
if (IS_GEN6(dev)) {
plane_formats = snb_plane_formats;
num_plane_formats = ARRAY_SIZE(snb_plane_formats);
} else {
plane_formats = ilk_plane_formats;
num_plane_formats = ARRAY_SIZE(ilk_plane_formats);
}
break;
case 7:
case 8:
if (IS_IVYBRIDGE(dev)) {
intel_plane->can_scale = true;
intel_plane->max_downscale = 2;
} else {
intel_plane->can_scale = false;
intel_plane->max_downscale = 1;
}
if (IS_VALLEYVIEW(dev)) {
intel_plane->update_plane = vlv_update_plane;
intel_plane->disable_plane = vlv_disable_plane;
intel_plane->update_colorkey = vlv_update_colorkey;
intel_plane->get_colorkey = vlv_get_colorkey;
plane_formats = vlv_plane_formats;
num_plane_formats = ARRAY_SIZE(vlv_plane_formats);
} else {
intel_plane->update_plane = ivb_update_plane;
intel_plane->disable_plane = ivb_disable_plane;
intel_plane->update_colorkey = ivb_update_colorkey;
intel_plane->get_colorkey = ivb_get_colorkey;
plane_formats = snb_plane_formats;
num_plane_formats = ARRAY_SIZE(snb_plane_formats);
}
break;
case 9:
/*
* FIXME: Skylake planes can be scaled (with some restrictions),
* but this is for another time.
*/
intel_plane->can_scale = false;
intel_plane->max_downscale = 1;
intel_plane->update_plane = skl_update_plane;
intel_plane->disable_plane = skl_disable_plane;
intel_plane->update_colorkey = skl_update_colorkey;
intel_plane->get_colorkey = skl_get_colorkey;
plane_formats = skl_plane_formats;
num_plane_formats = ARRAY_SIZE(skl_plane_formats);
break;
default:
kfree(intel_plane);
return -ENODEV;
}
intel_plane->pipe = pipe;
intel_plane->plane = plane;
intel_plane->check_plane = intel_check_sprite_plane;
intel_plane->commit_plane = intel_commit_sprite_plane;
possible_crtcs = (1 << pipe);
ret = drm_universal_plane_init(dev, &intel_plane->base, possible_crtcs,
&intel_plane_funcs,
plane_formats, num_plane_formats,
DRM_PLANE_TYPE_OVERLAY);
if (ret) {
kfree(intel_plane);
goto out;
}
if (!dev->mode_config.rotation_property)
dev->mode_config.rotation_property =
drm_mode_create_rotation_property(dev,
BIT(DRM_ROTATE_0) |
BIT(DRM_ROTATE_180));
if (dev->mode_config.rotation_property)
drm_object_attach_property(&intel_plane->base.base,
dev->mode_config.rotation_property,
state->base.rotation);
drm_plane_helper_add(&intel_plane->base, &intel_plane_helper_funcs);
out:
return ret;
}
Reference in New Issue View Git Blame Copy Permalink