forked from Minki/linux
3091fa77ff
The USB PCI quirks code gets built into the kernel whenever CONFIG_PCI is enabled, even if CONFIG_USB is not set. This can cause unnecessary messages to show up in the kernel log, such as "CONFIG_USB_XHCI_HCD is turned off, defaulting to EHCI" (which makes no sense when the kernel has been configured without host-side USB support). This patch addresses the problem by building pci-quirks.o only when CONFIG_PCI and CONFIG_USB are both enabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Toralf Förster <toralf.foerster@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
80 lines
2.7 KiB
Makefile
80 lines
2.7 KiB
Makefile
#
|
|
# Makefile for USB Host Controller Drivers
|
|
#
|
|
|
|
# tell define_trace.h where to find the xhci trace header
|
|
CFLAGS_xhci-trace.o := -I$(src)
|
|
|
|
fhci-y := fhci-hcd.o fhci-hub.o fhci-q.o
|
|
fhci-y += fhci-mem.o fhci-tds.o fhci-sched.o
|
|
|
|
fhci-$(CONFIG_FHCI_DEBUG) += fhci-dbg.o
|
|
|
|
xhci-hcd-y := xhci.o xhci-mem.o
|
|
xhci-hcd-y += xhci-ring.o xhci-hub.o xhci-dbg.o
|
|
xhci-hcd-y += xhci-trace.o
|
|
|
|
xhci-plat-hcd-y := xhci-plat.o
|
|
ifneq ($(CONFIG_USB_XHCI_MVEBU), )
|
|
xhci-plat-hcd-y += xhci-mvebu.o
|
|
endif
|
|
ifneq ($(CONFIG_USB_XHCI_RCAR), )
|
|
xhci-plat-hcd-y += xhci-rcar.o
|
|
endif
|
|
|
|
obj-$(CONFIG_USB_WHCI_HCD) += whci/
|
|
|
|
ifneq ($(CONFIG_USB), )
|
|
obj-$(CONFIG_PCI) += pci-quirks.o
|
|
endif
|
|
|
|
obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o
|
|
obj-$(CONFIG_USB_XHCI_PLATFORM) += xhci-plat-hcd.o
|
|
|
|
obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
|
|
obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
|
|
obj-$(CONFIG_USB_EHCI_HCD_PLATFORM) += ehci-platform.o
|
|
obj-$(CONFIG_USB_EHCI_MXC) += ehci-mxc.o
|
|
obj-$(CONFIG_USB_EHCI_HCD_OMAP) += ehci-omap.o
|
|
obj-$(CONFIG_USB_EHCI_HCD_ORION) += ehci-orion.o
|
|
obj-$(CONFIG_USB_EHCI_HCD_SPEAR) += ehci-spear.o
|
|
obj-$(CONFIG_USB_EHCI_HCD_STI) += ehci-st.o
|
|
obj-$(CONFIG_USB_EHCI_EXYNOS) += ehci-exynos.o
|
|
obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-atmel.o
|
|
obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o
|
|
obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
|
|
obj-$(CONFIG_USB_W90X900_EHCI) += ehci-w90x900.o
|
|
|
|
obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o
|
|
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
|
|
obj-$(CONFIG_USB_ISP1362_HCD) += isp1362-hcd.o
|
|
|
|
obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o
|
|
obj-$(CONFIG_USB_OHCI_HCD_PCI) += ohci-pci.o
|
|
obj-$(CONFIG_USB_OHCI_HCD_PLATFORM) += ohci-platform.o
|
|
obj-$(CONFIG_USB_OHCI_EXYNOS) += ohci-exynos.o
|
|
obj-$(CONFIG_USB_OHCI_HCD_OMAP1) += ohci-omap.o
|
|
obj-$(CONFIG_USB_OHCI_HCD_OMAP3) += ohci-omap3.o
|
|
obj-$(CONFIG_USB_OHCI_HCD_SPEAR) += ohci-spear.o
|
|
obj-$(CONFIG_USB_OHCI_HCD_STI) += ohci-st.o
|
|
obj-$(CONFIG_USB_OHCI_HCD_AT91) += ohci-at91.o
|
|
obj-$(CONFIG_USB_OHCI_HCD_S3C2410) += ohci-s3c2410.o
|
|
obj-$(CONFIG_USB_OHCI_HCD_LPC32XX) += ohci-nxp.o
|
|
obj-$(CONFIG_USB_OHCI_HCD_PXA27X) += ohci-pxa27x.o
|
|
|
|
obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o
|
|
obj-$(CONFIG_USB_FHCI_HCD) += fhci.o
|
|
obj-$(CONFIG_USB_XHCI_HCD) += xhci-hcd.o
|
|
obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o
|
|
obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o
|
|
obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o
|
|
obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o
|
|
obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o
|
|
obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o
|
|
obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o
|
|
obj-$(CONFIG_USB_HCD_BCMA) += bcma-hcd.o
|
|
obj-$(CONFIG_USB_HCD_SSB) += ssb-hcd.o
|
|
obj-$(CONFIG_USB_FUSBH200_HCD) += fusbh200-hcd.o
|
|
obj-$(CONFIG_USB_FOTG210_HCD) += fotg210-hcd.o
|
|
obj-$(CONFIG_USB_MAX3421_HCD) += max3421-hcd.o
|